Merge branch 'master' into pio-host

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -60,11 +60,12 @@ body:
 
   - type: textarea
     attributes:
-      label: Debug Log
+      label: Debug Log as txt file
       placeholder: |
-        TinyUSB debug log where the issue occurred as attached txt file, best with comments to explain the actual events.
-
-        Note: To enable logging, add `LOG=3` to to the make command if building with stock examples or set `CFG_TUSB_DEBUG=3` in your tusb_config.h. 
+        Attach your debug log txt file here, where the issue occurred, best with comments to explain the actual events.
+        
+        Note1: Please DO NOT paste your lengthy log contents here since it hurts the readibility.
+        Note2: To enable logging, add `LOG=3` to to the make command if building with stock examples or set `CFG_TUSB_DEBUG=3` in your tusb_config.h. 
         More information can be found at [example's readme](https://github.com/hathach/tinyusb/blob/master/docs/getting_started.md)
     validations:
       required: false

.gitmodules

@@ -97,6 +97,12 @@
 [submodule "hw/mcu/st/stm32l5xx_hal_driver"]
 	path = hw/mcu/st/stm32l5xx_hal_driver
 	url = https://github.com/STMicroelectronics/stm32l5xx_hal_driver.git
+[submodule "hw/mcu/st/cmsis_device_wb"]
+	path = hw/mcu/st/cmsis_device_wb
+	url = https://github.com/STMicroelectronics/cmsis_device_wb.git
+[submodule "hw/mcu/st/stm32wbxx_hal_driver"]
+	path = hw/mcu/st/stm32wbxx_hal_driver
+	url = https://github.com/STMicroelectronics/stm32wbxx_hal_driver.git
 [submodule "lib/sct_neopixel"]
 	path = lib/sct_neopixel
 	url = https://github.com/gsteiert/sct_neopixel

docs/reference/supported.rst

@@ -42,7 +42,7 @@ Supported MCUs
 +--------------+---------+-------------+--------+------+-----------+-------------------+--------------+
 | NXP          | iMXRT   | RT10xx      | ✔      | ✔    | ✔         | ci_hs             |              |
 |              +---------+-------------+--------+------+-----------+-------------------+--------------+
-|              | Kinetis | KL25        | ✔      | ⚠     | ✖         |                   |              |
+|              | Kinetis | KL25        | ✔      | ⚠    | ✖         |                   |              |
 |              |         +-------------+--------+------+-----------+-------------------+--------------+
 |              |         | K32L2       | ✔      |      | ✖         |                   |              |
 |              +---------+-------------+--------+------+-----------+-------------------+--------------+

examples/device/hid_composite_freertos/src/CMakeLists.txt

@@ -31,5 +31,5 @@ target_sources(${COMPONENT_TARGET} PUBLIC
   "${TOP}/src/class/net/ncm_device.c"
   "${TOP}/src/class/usbtmc/usbtmc_device.c"
   "${TOP}/src/class/vendor/vendor_device.c"
-  "${TOP}/src/portable/espressif/esp32sx/dcd_esp32sx.c"
+  "${TOP}/src/portable/synopsys/dwc2/dcd_dwc2.c"
 )

examples/device/uac2_headset/src/usb_descriptors.h

@@ -86,7 +86,7 @@ enum
 
 #define TUD_AUDIO_HEADSET_STEREO_DESCRIPTOR(_stridx, _epout, _epin) \
     /* Standard Interface Association Descriptor (IAD) */\
-    TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ ITF_NUM_TOTAL, /*_stridx*/ 0x00),\
+    TUD_AUDIO_DESC_IAD(/*_firstitfs*/ ITF_NUM_AUDIO_CONTROL, /*_nitfs*/ 3, /*_stridx*/ 0x00),\
     /* Standard AC Interface Descriptor(4.7.1) */\
     TUD_AUDIO_DESC_STD_AC(/*_itfnum*/ ITF_NUM_AUDIO_CONTROL, /*_nEPs*/ 0x00, /*_stridx*/ _stridx),\
     /* Class-Specific AC Interface Header Descriptor(4.7.2) */\

examples/host/bare_api/CMakeLists.txt

@@ -0,0 +1,27 @@
+cmake_minimum_required(VERSION 3.5)
+
+include(${CMAKE_CURRENT_SOURCE_DIR}/../../../hw/bsp/family_support.cmake)
+
+# gets PROJECT name for the example
+family_get_project_name(PROJECT ${CMAKE_CURRENT_LIST_DIR})
+
+project(${PROJECT})
+
+# Checks this example is valid for the family and initializes the project
+family_initialize_project(${PROJECT} ${CMAKE_CURRENT_LIST_DIR})
+
+add_executable(${PROJECT})
+
+# Example source
+target_sources(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src/main.c
+        )
+
+# Example include
+target_include_directories(${PROJECT} PUBLIC
+        ${CMAKE_CURRENT_SOURCE_DIR}/src
+        )
+
+# Configure compilation flags and libraries for the example... see the corresponding function
+# in hw/bsp/FAMILY/family.cmake for details.
+family_configure_host_example(${PROJECT})

examples/host/bare_api/Makefile

@@ -0,0 +1,27 @@
+include ../../../tools/top.mk
+include ../../make.mk
+
+INC += \
+	src \
+	$(TOP)/hw \
+
+# Example source
+EXAMPLE_SOURCE += \
+	src/main.c
+
+SRC_C += $(addprefix $(CURRENT_PATH)/, $(EXAMPLE_SOURCE))
+
+# TODO: suppress warning caused by host stack
+CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference
+
+# TinyUSB Host Stack source
+SRC_C += \
+	src/class/cdc/cdc_host.c \
+	src/class/hid/hid_host.c \
+	src/class/msc/msc_host.c \
+	src/host/hub.c \
+	src/host/usbh.c \
+	src/portable/ohci/ohci.c \
+	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
+
+include ../../rules.mk

examples/host/bare_api/only.txt

@@ -0,0 +1,9 @@
+mcu:LPC175X_6X
+mcu:LPC177X_8X
+mcu:LPC18XX
+mcu:LPC40XX
+mcu:LPC43XX
+mcu:MIMXRT10XX
+mcu:RP2040
+mcu:MSP432E4
+mcu:RX65X

examples/host/bare_api/src/main.c

@@ -0,0 +1,416 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+/* This example current worked and tested with following controller
+ * - Sony DualShock 4 [CUH-ZCT2x] VID = 0x054c, PID = 0x09cc
+ */
+
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "bsp/board.h"
+#include "tusb.h"
+
+// English
+#define LANGUAGE_ID 0x0409
+#define BUF_COUNT   4
+
+
+tusb_desc_device_t desc_device;
+
+uint8_t buf_pool[BUF_COUNT][64];
+uint8_t buf_owner[BUF_COUNT] = { 0 }; // device address that owns buffer
+
+//--------------------------------------------------------------------+
+// MACRO CONSTANT TYPEDEF PROTYPES
+//--------------------------------------------------------------------+
+void led_blinking_task(void);
+
+static void print_utf16(uint16_t *temp_buf, size_t buf_len);
+void print_device_descriptor(tuh_xfer_t* xfer);
+void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg);
+
+uint8_t* get_hid_buf(uint8_t daddr);
+void free_hid_buf(uint8_t daddr);
+
+/*------------- MAIN -------------*/
+int main(void)
+{
+  board_init();
+
+  printf("TinyUSB Host HID Controller Example\r\n");
+  tusb_init();
+
+  while (1)
+  {
+    // tinyusb host task
+    tuh_task();
+    led_blinking_task();
+  }
+
+  return 0;
+}
+
+/*------------- TinyUSB Callbacks -------------*/
+
+// Invoked when device is mounted (configured)
+void tuh_mount_cb (uint8_t daddr)
+{
+  printf("Device attached, address = %d\r\n", daddr);
+
+  // Get Device Descriptor sync API
+  // TODO: invoking control trannsfer now has issue with mounting hub with multiple devices attached, fix later
+  tuh_descriptor_get_device(daddr, &desc_device, 18, print_device_descriptor, 0);
+}
+
+/// Invoked when device is unmounted (bus reset/unplugged)
+void tuh_umount_cb(uint8_t daddr)
+{
+  printf("Device removed, address = %d\r\n", daddr);
+  free_hid_buf(daddr);
+}
+
+//--------------------------------------------------------------------+
+// Device Descriptor
+//--------------------------------------------------------------------+
+
+void print_device_descriptor(tuh_xfer_t* xfer)
+{
+  if ( XFER_RESULT_SUCCESS != xfer->result )
+  {
+    printf("Failed to get device descriptor\r\n");
+    return;
+  }
+
+  uint8_t const daddr = xfer->daddr;
+
+  printf("Device %u: ID %04x:%04x\r\n", daddr, desc_device.idVendor, desc_device.idProduct);
+  printf("Device Descriptor:\r\n");
+  printf("  bLength             %u\r\n"     , desc_device.bLength);
+  printf("  bDescriptorType     %u\r\n"     , desc_device.bDescriptorType);
+  printf("  bcdUSB              %04x\r\n"   , desc_device.bcdUSB);
+  printf("  bDeviceClass        %u\r\n"     , desc_device.bDeviceClass);
+  printf("  bDeviceSubClass     %u\r\n"     , desc_device.bDeviceSubClass);
+  printf("  bDeviceProtocol     %u\r\n"     , desc_device.bDeviceProtocol);
+  printf("  bMaxPacketSize0     %u\r\n"     , desc_device.bMaxPacketSize0);
+  printf("  idVendor            0x%04x\r\n" , desc_device.idVendor);
+  printf("  idProduct           0x%04x\r\n" , desc_device.idProduct);
+  printf("  bcdDevice           %04x\r\n"   , desc_device.bcdDevice);
+
+  // Get String descriptor using Sync API
+  uint16_t temp_buf[128];
+
+  printf("  iManufacturer       %u     "     , desc_device.iManufacturer);
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_manufacturer_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)) )
+  {
+    print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf));
+  }
+  printf("\r\n");
+
+  printf("  iProduct            %u     "     , desc_device.iProduct);
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_product_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)))
+  {
+    print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf));
+  }
+  printf("\r\n");
+
+  printf("  iSerialNumber       %u     "     , desc_device.iSerialNumber);
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_serial_string_sync(daddr, LANGUAGE_ID, temp_buf, sizeof(temp_buf)))
+  {
+    print_utf16(temp_buf, TU_ARRAY_SIZE(temp_buf));
+  }
+  printf("\r\n");
+
+  printf("  bNumConfigurations  %u\r\n"     , desc_device.bNumConfigurations);
+
+  // Get configuration descriptor with sync API
+  if (XFER_RESULT_SUCCESS == tuh_descriptor_get_configuration_sync(daddr, 0, temp_buf, sizeof(temp_buf)))
+  {
+    parse_config_descriptor(daddr, (tusb_desc_configuration_t*) temp_buf);
+  }
+}
+
+//--------------------------------------------------------------------+
+// Configuration Descriptor
+//--------------------------------------------------------------------+
+
+// count total length of an interface
+uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len);
+
+void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len);
+
+// simple configuration parser to open and listen to HID Endpoint IN
+void parse_config_descriptor(uint8_t dev_addr, tusb_desc_configuration_t const* desc_cfg)
+{
+  uint8_t const* desc_end = ((uint8_t const*) desc_cfg) + tu_le16toh(desc_cfg->wTotalLength);
+  uint8_t const* p_desc   = tu_desc_next(desc_cfg);
+
+  // parse each interfaces
+  while( p_desc < desc_end )
+  {
+    uint8_t assoc_itf_count = 1;
+
+    // Class will always starts with Interface Association (if any) and then Interface descriptor
+    if ( TUSB_DESC_INTERFACE_ASSOCIATION == tu_desc_type(p_desc) )
+    {
+      tusb_desc_interface_assoc_t const * desc_iad = (tusb_desc_interface_assoc_t const *) p_desc;
+      assoc_itf_count = desc_iad->bInterfaceCount;
+
+      p_desc = tu_desc_next(p_desc); // next to Interface
+    }
+
+    // must be interface from now
+    if( TUSB_DESC_INTERFACE != tu_desc_type(p_desc) ) return;
+    tusb_desc_interface_t const* desc_itf = (tusb_desc_interface_t const*) p_desc;
+
+    uint16_t const drv_len = count_interface_total_len(desc_itf, assoc_itf_count, desc_end-p_desc);
+
+    // probably corrupted descriptor
+    if(drv_len < sizeof(tusb_desc_interface_t)) return;
+
+    // only open and listen to HID endpoint IN
+    if (desc_itf->bInterfaceClass == TUSB_CLASS_HID)
+    {
+      open_hid_interface(dev_addr, desc_itf, drv_len);
+    }
+
+    // next Interface or IAD descriptor
+    p_desc += drv_len;
+  }
+}
+
+uint16_t count_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len)
+{
+  uint8_t const* p_desc = (uint8_t const*) desc_itf;
+  uint16_t len = 0;
+
+  while (itf_count--)
+  {
+    // Next on interface desc
+    len += tu_desc_len(desc_itf);
+    p_desc = tu_desc_next(p_desc);
+
+    while (len < max_len)
+    {
+      // return on IAD regardless of itf count
+      if ( tu_desc_type(p_desc) == TUSB_DESC_INTERFACE_ASSOCIATION ) return len;
+
+      if ( (tu_desc_type(p_desc) == TUSB_DESC_INTERFACE) &&
+           ((tusb_desc_interface_t const*) p_desc)->bAlternateSetting == 0 )
+      {
+        break;
+      }
+
+      len += tu_desc_len(p_desc);
+      p_desc = tu_desc_next(p_desc);
+    }
+  }
+
+  return len;
+}
+
+//--------------------------------------------------------------------+
+// HID Interface
+//--------------------------------------------------------------------+
+
+void hid_report_received(tuh_xfer_t* xfer);
+
+void open_hid_interface(uint8_t daddr, tusb_desc_interface_t const *desc_itf, uint16_t max_len)
+{
+  // len = interface + hid + n*endpoints
+  uint16_t const drv_len = sizeof(tusb_desc_interface_t) + sizeof(tusb_hid_descriptor_hid_t) + desc_itf->bNumEndpoints*sizeof(tusb_desc_endpoint_t);
+
+  // corrupted descriptor
+  if (max_len < drv_len) return;
+
+  uint8_t const *p_desc = (uint8_t const *) desc_itf;
+
+  // HID descriptor
+  p_desc = tu_desc_next(p_desc);
+  tusb_hid_descriptor_hid_t const *desc_hid = (tusb_hid_descriptor_hid_t const *) p_desc;
+  if(HID_DESC_TYPE_HID != desc_hid->bDescriptorType) return;
+
+  // Endpoint descriptor
+  p_desc = tu_desc_next(p_desc);
+  tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc;
+
+  for(int i = 0; i < desc_itf->bNumEndpoints; i++)
+  {
+    if (TUSB_DESC_ENDPOINT != desc_ep->bDescriptorType) return;
+
+    if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN)
+    {
+      // skip if failed to open endpoint
+      if ( ! tuh_edpt_open(daddr, desc_ep) ) return;
+
+      uint8_t* buf = get_hid_buf(daddr);
+      if (!buf) return; // out of memory
+
+      tuh_xfer_t xfer =
+      {
+        .daddr       = daddr,
+        .ep_addr     = desc_ep->bEndpointAddress,
+        .buflen      = 64,
+        .buffer      = buf,
+        .complete_cb = hid_report_received,
+        .user_data   = (uintptr_t) buf, // since buffer is not available in callback, use user data to store the buffer
+      };
+
+      // submit transfer for this EP
+      tuh_edpt_xfer(&xfer);
+
+      printf("Listen to [dev %u: ep %02x]\r\n", daddr, desc_ep->bEndpointAddress);
+    }
+
+    p_desc = tu_desc_next(p_desc);
+    desc_ep = (tusb_desc_endpoint_t const *) p_desc;
+  }
+}
+
+void hid_report_received(tuh_xfer_t* xfer)
+{
+  // Note: not all field in xfer is available for use (i.e filled by tinyusb stack) in callback to save sram
+  // For instance, xfer->buffer is NULL. We have used user_data to store buffer when submitted callback
+  uint8_t* buf = (uint8_t*) xfer->user_data;
+
+  if (xfer->result == XFER_RESULT_SUCCESS)
+  {
+    printf("[dev %u: ep %02x] HID Report:", xfer->daddr, xfer->ep_addr);
+    for(uint32_t i=0; i<xfer->actual_len; i++)
+    {
+      if (i%16 == 0) printf("\r\n  ");
+      printf("%02X ", buf[i]);
+    }
+    printf("\r\n");
+  }
+
+  // continue to submit transfer, with updated buffer
+  // other field remain the same
+  xfer->buflen = 64;
+  xfer->buffer = buf;
+
+  tuh_edpt_xfer(xfer);
+}
+
+//--------------------------------------------------------------------+
+// Buffer helper
+//--------------------------------------------------------------------+
+
+// get an buffer from pool
+uint8_t* get_hid_buf(uint8_t daddr)
+{
+  for(size_t i=0; i<BUF_COUNT; i++)
+  {
+    if (buf_owner[i] == 0)
+    {
+      buf_owner[i] = daddr;
+      return buf_pool[i];
+    }
+  }
+
+  // out of memory, increase BUF_COUNT
+  return NULL;
+}
+
+// free all buffer owned by device
+void free_hid_buf(uint8_t daddr)
+{
+  for(size_t i=0; i<BUF_COUNT; i++)
+  {
+    if (buf_owner[i] == daddr) buf_owner[i] = 0;
+  }
+}
+
+//--------------------------------------------------------------------+
+// Blinking Task
+//--------------------------------------------------------------------+
+void led_blinking_task(void)
+{
+  const uint32_t interval_ms = 1000;
+  static uint32_t start_ms = 0;
+
+  static bool led_state = false;
+
+  // Blink every interval ms
+  if ( board_millis() - start_ms < interval_ms) return; // not enough time
+  start_ms += interval_ms;
+
+  board_led_write(led_state);
+  led_state = 1 - led_state; // toggle
+}
+
+//--------------------------------------------------------------------+
+// String Descriptor Helper
+//--------------------------------------------------------------------+
+
+static void _convert_utf16le_to_utf8(const uint16_t *utf16, size_t utf16_len, uint8_t *utf8, size_t utf8_len) {
+    // TODO: Check for runover.
+    (void)utf8_len;
+    // Get the UTF-16 length out of the data itself.
+
+    for (size_t i = 0; i < utf16_len; i++) {
+        uint16_t chr = utf16[i];
+        if (chr < 0x80) {
+            *utf8++ = chr & 0xff;
+        } else if (chr < 0x800) {
+            *utf8++ = (uint8_t)(0xC0 | (chr >> 6 & 0x1F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F));
+        } else {
+            // TODO: Verify surrogate.
+            *utf8++ = (uint8_t)(0xE0 | (chr >> 12 & 0x0F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 6 & 0x3F));
+            *utf8++ = (uint8_t)(0x80 | (chr >> 0 & 0x3F));
+        }
+        // TODO: Handle UTF-16 code points that take two entries.
+    }
+}
+
+// Count how many bytes a utf-16-le encoded string will take in utf-8.
+static int _count_utf8_bytes(const uint16_t *buf, size_t len) {
+    size_t total_bytes = 0;
+    for (size_t i = 0; i < len; i++) {
+        uint16_t chr = buf[i];
+        if (chr < 0x80) {
+            total_bytes += 1;
+        } else if (chr < 0x800) {
+            total_bytes += 2;
+        } else {
+            total_bytes += 3;
+        }
+        // TODO: Handle UTF-16 code points that take two entries.
+    }
+    return total_bytes;
+}
+
+static void print_utf16(uint16_t *temp_buf, size_t buf_len) {
+    size_t utf16_len = ((temp_buf[0] & 0xff) - 2) / sizeof(uint16_t);
+    size_t utf8_len = _count_utf8_bytes(temp_buf + 1, utf16_len);
+    _convert_utf16le_to_utf8(temp_buf + 1, utf16_len, (uint8_t *) temp_buf, sizeof(uint16_t) * buf_len);
+    ((uint8_t*) temp_buf)[utf8_len] = '\0';
+
+    printf((char*)temp_buf);
+}

examples/host/bare_api/src/tusb_config.h

@@ -0,0 +1,94 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ */
+
+#ifndef _TUSB_CONFIG_H_
+#define _TUSB_CONFIG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------
+// COMMON CONFIGURATION
+//--------------------------------------------------------------------
+
+// defined by compiler flags for flexibility
+#ifndef CFG_TUSB_MCU
+  #error CFG_TUSB_MCU must be defined
+#endif
+
+#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX
+  #define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_HOST | OPT_MODE_HIGH_SPEED)
+#else
+  #define CFG_TUSB_RHPORT0_MODE       OPT_MODE_HOST
+#endif
+
+#ifndef CFG_TUSB_OS
+#define CFG_TUSB_OS                 OPT_OS_NONE
+#endif
+
+// CFG_TUSB_DEBUG is defined by compiler in DEBUG build
+// #define CFG_TUSB_DEBUG           0
+
+/* USB DMA on some MCUs can only access a specific SRAM region with restriction on alignment.
+ * Tinyusb use follows macros to declare transferring memory so that they can be put
+ * into those specific section.
+ * e.g
+ * - CFG_TUSB_MEM SECTION : __attribute__ (( section(".usb_ram") ))
+ * - CFG_TUSB_MEM_ALIGN   : __attribute__ ((aligned(4)))
+ */
+#ifndef CFG_TUSB_MEM_SECTION
+#define CFG_TUSB_MEM_SECTION
+#endif
+
+#ifndef CFG_TUSB_MEM_ALIGN
+#define CFG_TUSB_MEM_ALIGN          __attribute__ ((aligned(4)))
+#endif
+
+//--------------------------------------------------------------------
+// CONFIGURATION
+//--------------------------------------------------------------------
+
+// Size of buffer to hold descriptors and other data used for enumeration
+#define CFG_TUH_ENUMERATION_BUFSIZE 256
+
+// only hub class is enabled
+#define CFG_TUH_HUB                 1
+
+// max device support (excluding hub device)
+// 1 hub typically has 4 ports
+#define CFG_TUH_DEVICE_MAX          (CFG_TUH_HUB ? 4 : 1)
+
+// Max endpoint per device
+#define CFG_TUH_ENDPOINT_MAX        8
+
+// Enable tuh_edpt_xfer() API
+#define CFG_TUH_API_EDPT_XFER       1
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_CONFIG_H_ */

examples/host/cdc_msc_hid/Makefile

@@ -19,7 +19,6 @@ SRC_C += \
 	src/class/msc/msc_host.c \
 	src/host/hub.c \
 	src/host/usbh.c \
-	src/host/usbh_control.c \
 	src/portable/ohci/ohci.c \
 	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
 

examples/host/cdc_msc_hid/src/main.c

@@ -71,20 +71,6 @@ int main(void)
 #if CFG_TUH_CDC
 CFG_TUSB_MEM_SECTION static char serial_in_buffer[64] = { 0 };
 
-void tuh_mount_cb(uint8_t dev_addr)
-{
-  // application set-up
-  printf("A device with address %d is mounted\r\n", dev_addr);
-
-  tuh_cdc_receive(dev_addr, serial_in_buffer, sizeof(serial_in_buffer), true); // schedule first transfer
-}
-
-void tuh_umount_cb(uint8_t dev_addr)
-{
-  // application tear-down
-  printf("A device with address %d is unmounted \r\n", dev_addr);
-}
-
 // invoked ISR context
 void tuh_cdc_xfer_isr(uint8_t dev_addr, xfer_result_t event, cdc_pipeid_t pipe_id, uint32_t xferred_bytes)
 {
@@ -109,6 +95,19 @@ void cdc_task(void)
 // TinyUSB Callbacks
 //--------------------------------------------------------------------+
 
+void tuh_mount_cb(uint8_t dev_addr)
+{
+  // application set-up
+  printf("A device with address %d is mounted\r\n", dev_addr);
+}
+
+void tuh_umount_cb(uint8_t dev_addr)
+{
+  // application tear-down
+  printf("A device with address %d is unmounted \r\n", dev_addr);
+}
+
+
 //--------------------------------------------------------------------+
 // Blinking Task
 //--------------------------------------------------------------------+

examples/host/hid_controller/Makefile

@@ -22,7 +22,6 @@ SRC_C += \
 	src/class/msc/msc_host.c \
 	src/host/hub.c \
 	src/host/usbh.c \
-	src/host/usbh_control.c \
 	src/portable/ohci/ohci.c \
 	src/portable/nxp/lpc17_40/hcd_lpc17_40.c
 

examples/host/hid_to_cdc/Makefile

@@ -14,7 +14,6 @@ CFLAGS += -Wno-error=cast-align -Wno-error=null-dereference
 SRC_C += \
 	src/class/hid/hid_host.c \
 	src/host/hub.c \
-	src/host/usbh.c \
-	src/host/usbh_control.c
+	src/host/usbh.c
 
 include ../../rules.mk

hw/bsp/rp2040/family.cmake

@@ -83,7 +83,6 @@ if (NOT TARGET _rp2040_family_inclusion_marker)
 			${TOP}/src/portable/raspberrypi/rp2040/hcd_rp2040.c
 			${TOP}/src/portable/raspberrypi/rp2040/rp2040_usb.c
 			${TOP}/src/host/usbh.c
-			${TOP}/src/host/usbh_control.c
 			${TOP}/src/host/hub.c
 			${TOP}/src/class/cdc/cdc_host.c
 			${TOP}/src/class/hid/hid_host.c

hw/bsp/stm32wb/boards/stm32wb55nucleo/board.h

@@ -0,0 +1,122 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Jerzy Kasenberg
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef BOARD_H_
+#define BOARD_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+// LED
+#define LED_PORT              GPIOB
+#define LED_PIN               GPIO_PIN_5
+#define LED_STATE_ON          1
+
+// Button
+#define BUTTON_PORT           GPIOC
+#define BUTTON_PIN            GPIO_PIN_4
+#define BUTTON_STATE_ACTIVE   0
+
+// UART Enable for STLink VCOM
+#define UART_DEV              USART1
+#define UART_CLK_EN           __HAL_RCC_USART1_CLK_ENABLE
+#define UART_GPIO_PORT        GPIOB
+#define UART_GPIO_AF          GPIO_AF7_USART1
+#define UART_TX_PIN           GPIO_PIN_6
+#define UART_RX_PIN           GPIO_PIN_7
+
+
+//--------------------------------------------------------------------+
+// RCC Clock
+//--------------------------------------------------------------------+
+static inline void board_clock_init(void)
+{
+  RCC_OscInitTypeDef RCC_OscInitStruct = {0};
+  RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
+  RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
+
+  // Initializes the CPU, AHB and APB busses clocks
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48 | RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState       = RCC_HSE_ON;
+  RCC_OscInitStruct.HSI48State     = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState   = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource  = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM       = RCC_PLLM_DIV4;
+  RCC_OscInitStruct.PLL.PLLN       = 24;
+  RCC_OscInitStruct.PLL.PLLP       = RCC_PLLP_DIV4;
+  RCC_OscInitStruct.PLL.PLLQ       = RCC_PLLQ_DIV4;
+  RCC_OscInitStruct.PLL.PLLR       = RCC_PLLR_DIV3;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  // Initializes the CPU, AHB and APB busses clocks
+  RCC_ClkInitStruct.ClockType      = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
+  RCC_ClkInitStruct.SYSCLKSource   = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider  = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_3);
+
+  PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USB;
+  PeriphClkInit.UsbClockSelection    = RCC_USBCLKSOURCE_HSI48;
+  HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) ;
+
+#if 0 // TODO need to check if USB clock is enabled
+  /* Enable HSI48 */
+  memset(&RCC_OscInitStruct, 0, sizeof(RCC_OscInitStruct));
+
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48;
+  RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /*Enable CRS Clock*/
+  RCC_CRSInitTypeDef RCC_CRSInitStruct= {0};
+  __HAL_RCC_CRS_CLK_ENABLE();
+
+  /* Default Synchro Signal division factor (not divided) */
+  RCC_CRSInitStruct.Prescaler = RCC_CRS_SYNC_DIV1;
+
+  /* Set the SYNCSRC[1:0] bits according to CRS_Source value */
+  RCC_CRSInitStruct.Source = RCC_CRS_SYNC_SOURCE_USB;
+
+  /* HSI48 is synchronized with USB SOF at 1KHz rate */
+  RCC_CRSInitStruct.ReloadValue =  __HAL_RCC_CRS_RELOADVALUE_CALCULATE(48000000, 1000);
+  RCC_CRSInitStruct.ErrorLimitValue = RCC_CRS_ERRORLIMIT_DEFAULT;
+
+  /* Set the TRIM[5:0] to the default value */
+  RCC_CRSInitStruct.HSI48CalibrationValue = RCC_CRS_HSI48CALIBRATION_DEFAULT;
+
+  /* Start automatic synchronization */
+  HAL_RCCEx_CRSConfig(&RCC_CRSInitStruct);
+#endif
+}
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* BOARD_H_ */

hw/bsp/stm32wb/boards/stm32wb55nucleo/board.mk

@@ -0,0 +1,9 @@
+CFLAGS += \
+	-DSTM32WB55xx
+
+LD_FILE = $(BOARD_PATH)/stm32wb55xx_flash_cm4.ld
+
+SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32wb55xx_cm4.s
+
+# For flash-jlink target
+JLINK_DEVICE = STM32WB55RG

hw/bsp/stm32wb/boards/stm32wb55nucleo/stm32wb55xx_flash_cm4.ld

@@ -0,0 +1,171 @@
+/**
+*****************************************************************************
+**
+**  File        : stm32wb55xx_flash_cm4.ld
+**
+**  Abstract    : System Workbench Minimal System calls file
+**
+** 		          For more information about which c-functions
+**                need which of these lowlevel functions
+**                please consult the Newlib libc-manual
+**
+**  Environment : System Workbench for MCU
+**
+**  Distribution: The file is distributed “as is,” without any warranty
+**                of any kind.
+**
+*****************************************************************************
+** @attention
+**
+** Copyright (c) 2019 STMicroelectronics.
+** All rights reserved.
+**
+** This software is licensed under terms that can be found in the LICENSE file
+** in the root directory of this software component.
+** If no LICENSE file comes with this software, it is provided AS-IS.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20030000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x400;      /* required amount of heap  */
+_Min_Stack_Size = 0x1000;   /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx)                 : ORIGIN = 0x08000000, LENGTH = 512K
+RAM1 (xrw)                 : ORIGIN = 0x20000008, LENGTH = 0x2FFF8
+RAM_SHARED (xrw)           : ORIGIN = 0x20030000, LENGTH = 10K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM1 AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss section */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM1
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM1
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0       : { *(.ARM.attributes) }
+   MAPPING_TABLE (NOLOAD) : { *(MAPPING_TABLE) } >RAM_SHARED
+   MB_MEM1 (NOLOAD)       : { *(MB_MEM1) } >RAM_SHARED
+   MB_MEM2 (NOLOAD)       : { _sMB_MEM2 = . ; *(MB_MEM2) ; _eMB_MEM2 = . ; } >RAM_SHARED
+}
+
+

hw/bsp/stm32wb/family.c

@@ -0,0 +1,190 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022 Jerzy Kasenberg
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "stm32wbxx_hal.h"
+#include "bsp/board.h"
+#include "board.h"
+
+//--------------------------------------------------------------------+
+// Forward USB interrupt events to TinyUSB IRQ Handler
+//--------------------------------------------------------------------+
+void USB_HP_IRQHandler(void)
+{
+  tud_int_handler(0);
+}
+
+void USB_LP_IRQHandler(void)
+{
+  tud_int_handler(0);
+}
+
+//--------------------------------------------------------------------+
+// MACRO TYPEDEF CONSTANT ENUM
+//--------------------------------------------------------------------+
+UART_HandleTypeDef UartHandle;
+
+void board_init(void)
+{
+  board_clock_init();
+
+  // Enable All GPIOs clocks
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+  __HAL_RCC_GPIOB_CLK_ENABLE();
+  __HAL_RCC_GPIOC_CLK_ENABLE();
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+  __HAL_RCC_GPIOE_CLK_ENABLE();
+
+  UART_CLK_EN();
+
+#if CFG_TUSB_OS == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+  // Explicitly disable systick to prevent its ISR runs before scheduler start
+  SysTick->CTRL &= ~1U;
+
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  NVIC_SetPriority(OTG_FS_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
+#endif
+
+  GPIO_InitTypeDef  GPIO_InitStruct;
+
+  // LED
+  GPIO_InitStruct.Pin = LED_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
+
+#if 0
+  // MCO configuration for System clock value verification PA8 will have SYSCLK / 2
+  GPIO_InitStruct.Pin = 8;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+  HAL_RCC_MCOConfig(RCC_MCO1, RCC_MCO1SOURCE_SYSCLK, RCC_MCODIV_2);
+#endif
+
+  board_led_write(false);
+
+  // Button
+  GPIO_InitStruct.Pin = BUTTON_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = BUTTON_STATE_ACTIVE ? GPIO_PULLDOWN : GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(BUTTON_PORT, &GPIO_InitStruct);
+
+#ifdef UART_DEV
+  // UART
+  GPIO_InitStruct.Pin       = UART_TX_PIN | UART_RX_PIN;
+  GPIO_InitStruct.Mode      = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull      = GPIO_PULLUP;
+  GPIO_InitStruct.Speed     = GPIO_SPEED_FREQ_HIGH;
+  GPIO_InitStruct.Alternate = UART_GPIO_AF;
+  HAL_GPIO_Init(UART_GPIO_PORT, &GPIO_InitStruct);
+
+  UartHandle = (UART_HandleTypeDef){
+    .Instance        = UART_DEV,
+    .Init.BaudRate   = CFG_BOARD_UART_BAUDRATE,
+    .Init.WordLength = UART_WORDLENGTH_8B,
+    .Init.StopBits   = UART_STOPBITS_1,
+    .Init.Parity     = UART_PARITY_NONE,
+    .Init.HwFlowCtl  = UART_HWCONTROL_NONE,
+    .Init.Mode       = UART_MODE_TX_RX,
+    .Init.OverSampling = UART_OVERSAMPLING_16
+  };
+  HAL_UART_Init(&UartHandle);
+#endif
+
+  // USB Pins TODO double check USB clock and pin setup
+  // Configure USB DM and DP pins. This is optional, and maintained only for user guidance.
+  GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  HAL_PWREx_EnableVddUSB();
+  __HAL_RCC_USB_CLK_ENABLE();
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state)
+{
+  HAL_GPIO_WritePin(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
+}
+
+uint32_t board_button_read(void)
+{
+  return BUTTON_STATE_ACTIVE == HAL_GPIO_ReadPin(BUTTON_PORT, BUTTON_PIN);
+}
+
+int board_uart_read(uint8_t* buf, int len)
+{
+  (void) buf; (void) len;
+  return 0;
+}
+
+int board_uart_write(void const * buf, int len)
+{
+#ifdef UART_DEV
+  HAL_UART_Transmit(&UartHandle, (uint8_t*)(uintptr_t) buf, len, 0xffff);
+  return len;
+#else
+  (void) buf; (void) len; (void) UartHandle;
+  return 0;
+#endif
+}
+
+#if CFG_TUSB_OS  == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler (void)
+{
+  system_ticks++;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+#endif
+
+void HardFault_Handler (void)
+{
+  asm("bkpt");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void)
+{
+
+}

hw/bsp/stm32wb/family.mk

@@ -0,0 +1,44 @@
+UF2_FAMILY_ID = 0x70d16653
+ST_FAMILY = wb
+DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+
+ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
+ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
+
+include $(TOP)/$(BOARD_PATH)/board.mk
+
+CFLAGS += \
+  -flto \
+  -mthumb \
+  -mabi=aapcs \
+  -mcpu=cortex-m4 \
+  -mfloat-abi=hard \
+  -mfpu=fpv4-sp-d16 \
+  -nostdlib -nostartfiles \
+  -DCFG_TUSB_MCU=OPT_MCU_STM32WB
+
+# suppress warning caused by vendor mcu driver
+CFLAGS += -Wno-error=cast-align -Wno-unused-parameter
+
+SRC_C += \
+	src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
+	$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
+	$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
+
+INC += \
+	$(TOP)/$(BOARD_PATH) \
+	$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
+	$(TOP)/$(ST_CMSIS)/Include \
+	$(TOP)/$(ST_HAL_DRIVER)/Inc
+
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM4F
+
+# flash target using on-board stlink
+flash: flash-stlink

hw/bsp/stm32wb/stm32wbxx_hal_conf.h

@@ -0,0 +1,349 @@
+/**
+  ******************************************************************************
+  * @file    stm32wbxx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; Copyright (c) 2019 STMicroelectronics.
+  * All rights reserved.</center></h2>
+  *
+  * This software component is licensed by ST under BSD 3-Clause license,
+  * the "License"; You may not use this file except in compliance with the
+  * License. You may obtain a copy of the License at:
+  *                        opensource.org/licenses/BSD-3-Clause
+  *
+  ******************************************************************************
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32WBxx_HAL_CONF_H
+#define __STM32WBxx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+/*#define HAL_ADC_MODULE_ENABLED   */
+/*#define HAL_COMP_MODULE_ENABLED   */
+/*#define HAL_CRC_MODULE_ENABLED   */
+/*#define HAL_HSEM_MODULE_ENABLED   */
+/*#define HAL_IPCC_MODULE_ENABLED   */
+/*#define HAL_IRDA_MODULE_ENABLED   */
+/*#define HAL_LCD_MODULE_ENABLED   */
+/*#define HAL_LPTIM_MODULE_ENABLED   */
+/*#define HAL_PCD_MODULE_ENABLED   */
+/*#define HAL_PKA_MODULE_ENABLED   */
+/*#define HAL_QSPI_MODULE_ENABLED   */
+#define HAL_RTC_MODULE_ENABLED
+/*#define HAL_SAI_MODULE_ENABLED   */
+/*#define HAL_SMBUS_MODULE_ENABLED   */
+/*#define HAL_SMARTCARD_MODULE_ENABLED   */
+/*#define HAL_TSC_MODULE_ENABLED   */
+#define HAL_UART_MODULE_ENABLED
+/*#define HAL_USART_MODULE_ENABLED   */
+/*#define HAL_WWDG_MODULE_ENABLED   */
+#define HAL_CORTEX_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_IWDG_MODULE_ENABLED
+#define HAL_TIM_MODULE_ENABLED
+#define HAL_SPI_MODULE_ENABLED
+#define HAL_I2C_MODULE_ENABLED
+#define HAL_RNG_MODULE_ENABLED
+/*#define HAL_CRYP_MODULE_ENABLED  */
+
+#define USE_HAL_ADC_REGISTER_CALLBACKS       0u
+#define USE_HAL_COMP_REGISTER_CALLBACKS      0u
+#define USE_HAL_CRYP_REGISTER_CALLBACKS      0u
+#define USE_HAL_I2C_REGISTER_CALLBACKS       0u
+#define USE_HAL_IRDA_REGISTER_CALLBACKS      0u
+#define USE_HAL_LPTIM_REGISTER_CALLBACKS     0u
+#define USE_HAL_PCD_REGISTER_CALLBACKS       0u
+#define USE_HAL_PKA_REGISTER_CALLBACKS       0u
+#define USE_HAL_QSPI_REGISTER_CALLBACKS      0u
+#define USE_HAL_RNG_REGISTER_CALLBACKS       0u
+#define USE_HAL_RTC_REGISTER_CALLBACKS       0u
+#define USE_HAL_SAI_REGISTER_CALLBACKS       0u
+#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0u
+#define USE_HAL_SMBUS_REGISTER_CALLBACKS     0u
+#define USE_HAL_SPI_REGISTER_CALLBACKS       0u
+#define USE_HAL_TIM_REGISTER_CALLBACKS       0u
+#define USE_HAL_TSC_REGISTER_CALLBACKS       0u
+#define USE_HAL_UART_REGISTER_CALLBACKS      0u
+#define USE_HAL_USART_REGISTER_CALLBACKS     0u
+#define USE_HAL_WWDG_REGISTER_CALLBACKS      0u
+
+/* ########################## Oscillator Values adaptation ####################*/
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+#define HSE_VALUE    32000000U             /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    ((uint32_t)100)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal Multiple Speed oscillator (MSI) default value.
+  *        This value is the default MSI range value after Reset.
+  */
+#if !defined  (MSI_VALUE)
+  #define MSI_VALUE    ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* MSI_VALUE */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+#define HSI_VALUE    16000000U            /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI1) value.
+  */
+#if !defined  (LSI1_VALUE)
+ #define LSI1_VALUE  ((uint32_t)32000)       /*!< LSI1 Typical Value in Hz*/
+#endif /* LSI1_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief Internal Low Speed oscillator (LSI2) value.
+  */
+#if !defined  (LSI2_VALUE)
+ #define LSI2_VALUE  ((uint32_t)32000)       /*!< LSI2 Typical Value in Hz*/
+#endif /* LSI2_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  *        This value is used by the UART, RTC HAL module to compute the system frequency
+  */
+#if !defined  (LSE_VALUE)
+#define LSE_VALUE    32768U               /*!< Value of the External oscillator in Hz*/
+#endif /* LSE_VALUE */
+
+/**
+  * @brief Internal Multiple Speed oscillator (HSI48) default value.
+  *        This value is the default HSI48 range value after Reset.
+  */
+#if !defined (HSI48_VALUE)
+  #define HSI48_VALUE    ((uint32_t)48000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI48_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+#define LSE_STARTUP_TIMEOUT    5000U      /*!< Time out for LSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for SAI1 peripheral
+  *        This value is used by the RCC HAL module to compute the SAI1 & SAI2 clock source
+  *        frequency.
+  */
+#if !defined (EXTERNAL_SAI1_CLOCK_VALUE)
+  #define EXTERNAL_SAI1_CLOCK_VALUE    ((uint32_t)2097000) /*!< Value of the SAI1 External clock source in Hz*/
+#endif /* EXTERNAL_SAI1_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+
+#define  VDD_VALUE                    3300U   /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0U      /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1
+#define  INSTRUCTION_CACHE_ENABLE     1
+#define  DATA_CACHE_ENABLE            1
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+ * Activated: CRC code is present inside driver
+ * Deactivated: CRC code cleaned from driver
+ */
+
+#define USE_SPI_CRC                   0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32wbxx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32wbxx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_COMP_MODULE_ENABLED
+  #include "stm32wbxx_hal_comp.h"
+#endif /* HAL_COMP_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32wbxx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32wbxx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32wbxx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32wbxx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32wbxx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_HSEM_MODULE_ENABLED
+  #include "stm32wbxx_hal_hsem.h"
+#endif /* HAL_HSEM_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32wbxx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_IPCC_MODULE_ENABLED
+ #include "stm32wbxx_hal_ipcc.h"
+#endif /* HAL_IPCC_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32wbxx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LCD_MODULE_ENABLED
+ #include "stm32wbxx_hal_lcd.h"
+#endif /* HAL_LCD_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+  #include "stm32wbxx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+  #include "stm32wbxx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_PKA_MODULE_ENABLED
+  #include "stm32wbxx_hal_pka.h"
+#endif /* HAL_PKA_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32wbxx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #define USE_HAL_QSPI_REGISTER_CALLBACKS 0U
+ #include "stm32wbxx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32wbxx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+  #include "stm32wbxx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32wbxx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32wbxx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32wbxx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32wbxx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32wbxx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32wbxx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_TSC_MODULE_ENABLED
+  #include "stm32wbxx_hal_tsc.h"
+#endif /* HAL_TSC_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32wbxx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32wbxx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32wbxx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32WBxx_HAL_CONF_H */
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

hw/mcu/st/cmsis_device_wb

@@ -0,0 +1 @@
+Subproject commit 9c5d1920dd9fabbe2548e10561d63db829bb744f

hw/mcu/st/stm32wbxx_hal_driver

@@ -0,0 +1 @@
+Subproject commit 2c5f06638be516c1b772f768456ba637f077bac8

repository.yml

@@ -9,7 +9,9 @@ repo.versions:
     "0.10.0": "0.10.0"
     "0.10.1": "0.10.1"
     "0.11.0": "0.11.0"
+    "0.12.0": "0.12.0"
+    "0.13.0": "0.13.0"
 
     "0-dev": "0.0.0"        # master
-    "0-latest": "0.11.0"     # latest stable release
+    "0-latest": "0.13.0"    # latest stable release
 

src/class/cdc/cdc_host.c

@@ -100,7 +100,7 @@ bool tuh_cdc_send(uint8_t dev_addr, void const * p_data, uint32_t length, bool i
 {
   (void) is_notify;
   TU_VERIFY( tuh_cdc_mounted(dev_addr) );
-  TU_VERIFY( p_data != NULL && length, TUSB_ERROR_INVALID_PARA);
+  TU_VERIFY( p_data != NULL && length);
 
   uint8_t const ep_out = cdch_data[dev_addr-1].ep_out;
   if ( usbh_edpt_busy(dev_addr, ep_out) ) return false;
@@ -112,7 +112,7 @@ bool tuh_cdc_receive(uint8_t dev_addr, void * p_buffer, uint32_t length, bool is
 {
   (void) is_notify;
   TU_VERIFY( tuh_cdc_mounted(dev_addr) );
-  TU_VERIFY( p_buffer != NULL && length, TUSB_ERROR_INVALID_PARA);
+  TU_VERIFY( p_buffer != NULL && length );
 
   uint8_t const ep_in = cdch_data[dev_addr-1].ep_in;
   if ( usbh_edpt_busy(dev_addr, ep_in) ) return false;
@@ -120,9 +120,10 @@ bool tuh_cdc_receive(uint8_t dev_addr, void * p_buffer, uint32_t length, bool is
   return usbh_edpt_xfer(dev_addr, ep_in, p_buffer, length);
 }
 
-bool tuh_cdc_set_control_line_state(uint8_t dev_addr, bool dtr, bool rts, tuh_control_complete_cb_t complete_cb)
+bool tuh_cdc_set_control_line_state(uint8_t dev_addr, bool dtr, bool rts, tuh_xfer_cb_t complete_cb)
 {
   cdch_data_t const * p_cdc = get_itf(dev_addr);
+
   tusb_control_request_t const request =
   {
     .bmRequestType_bit =
@@ -137,8 +138,17 @@ bool tuh_cdc_set_control_line_state(uint8_t dev_addr, bool dtr, bool rts, tuh_co
     .wLength  = 0
   };
 
-  TU_ASSERT( tuh_control_xfer(dev_addr, &request, NULL, complete_cb) );
-  return true;
+  tuh_xfer_t xfer =
+  {
+    .daddr       = dev_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = NULL,
+    .complete_cb = complete_cb,
+    .user_data    = 0
+  };
+
+  return tuh_control_xfer(&xfer);
 }
 
 //--------------------------------------------------------------------+
@@ -151,6 +161,7 @@ void cdch_init(void)
 
 bool cdch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len)
 {
+  (void) rhport;
   (void) max_len;
 
   // Only support ACM subclass
@@ -186,7 +197,7 @@ bool cdch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *it
     // notification endpoint
     tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc;
 
-    TU_ASSERT( usbh_edpt_open(rhport, dev_addr, desc_ep) );
+    TU_ASSERT( tuh_edpt_open(dev_addr, desc_ep) );
     p_cdc->ep_notif = desc_ep->bEndpointAddress;
 
     drv_len += tu_desc_len(p_desc);
@@ -207,7 +218,7 @@ bool cdch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *it
       tusb_desc_endpoint_t const *desc_ep = (tusb_desc_endpoint_t const *) p_desc;
       TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType && TUSB_XFER_BULK == desc_ep->bmAttributes.xfer);
 
-      TU_ASSERT(usbh_edpt_open(rhport, dev_addr, desc_ep));
+      TU_ASSERT(tuh_edpt_open(dev_addr, desc_ep));
 
       if ( tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN )
       {

src/class/cdc/cdc_host.h

@@ -42,14 +42,14 @@
  * \defgroup   CDC_Serial_Host Host
  * @{ */
 
-bool tuh_cdc_set_control_line_state(uint8_t dev_addr, bool dtr, bool rts, tuh_control_complete_cb_t complete_cb);
+bool tuh_cdc_set_control_line_state(uint8_t dev_addr, bool dtr, bool rts, tuh_xfer_cb_t complete_cb);
 
-static inline bool tuh_cdc_connect(uint8_t dev_addr, tuh_control_complete_cb_t complete_cb)
+static inline bool tuh_cdc_connect(uint8_t dev_addr, tuh_xfer_cb_t complete_cb)
 {
   return tuh_cdc_set_control_line_state(dev_addr, true, true, complete_cb);
 }
 
-static inline bool tuh_cdc_disconnect(uint8_t dev_addr, tuh_control_complete_cb_t complete_cb)
+static inline bool tuh_cdc_disconnect(uint8_t dev_addr, tuh_xfer_cb_t complete_cb)
 {
   return tuh_cdc_set_control_line_state(dev_addr, false, false, complete_cb);
 }

src/class/cdc/cdc_rndis_host.h

@@ -50,7 +50,7 @@ typedef struct {
 }rndish_data_t;
 
 void rndish_init(void);
-tusb_error_t rndish_open_subtask(uint8_t dev_addr, cdch_data_t *p_cdc);
+bool rndish_open_subtask(uint8_t dev_addr, cdch_data_t *p_cdc);
 void rndish_xfer_isr(cdch_data_t *p_cdc, pipe_handle_t pipe_hdl, xfer_result_t event, uint32_t xferred_bytes);
 void rndish_close(uint8_t dev_addr);
 

src/class/hid/hid.h

@@ -43,7 +43,7 @@
 /** \defgroup ClassDriver_HID_Common Common Definitions
  *  @{ */
 
- /// USB HID Descriptor
+/// USB HID Descriptor
 typedef struct TU_ATTR_PACKED
 {
   uint8_t  bLength;         /**< Numeric expression that is the total size of the HID descriptor */

src/class/hid/hid_host.c

@@ -103,27 +103,27 @@ uint8_t tuh_hid_get_protocol(uint8_t dev_addr, uint8_t instance)
   return hid_itf->protocol_mode;
 }
 
-static bool set_protocol_complete(uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void set_protocol_complete(tuh_xfer_t* xfer)
 {
-  uint8_t const itf_num     = (uint8_t) request->wIndex;
-  uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
-  hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
+  uint8_t const itf_num     = (uint8_t) tu_le16toh(xfer->setup->wIndex);
+  uint8_t const daddr       = xfer->daddr;
+  uint8_t const instance    = get_instance_id_by_itfnum(daddr, itf_num);
+  hidh_interface_t* hid_itf = get_instance(daddr, instance);
 
-  if (XFER_RESULT_SUCCESS == result) hid_itf->protocol_mode = (uint8_t) request->wValue;
+  if (XFER_RESULT_SUCCESS == xfer->result)
+  {
+    hid_itf->protocol_mode = (uint8_t) tu_le16toh(xfer->setup->wValue);
+  }
 
   if (tuh_hid_set_protocol_complete_cb)
   {
-    tuh_hid_set_protocol_complete_cb(dev_addr, instance, hid_itf->protocol_mode);
+    tuh_hid_set_protocol_complete_cb(daddr, instance, hid_itf->protocol_mode);
   }
-
-  return true;
 }
 
-bool tuh_hid_set_protocol(uint8_t dev_addr, uint8_t instance, uint8_t protocol)
-{
-  hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
-  TU_VERIFY(hid_itf->itf_protocol != HID_ITF_PROTOCOL_NONE);
 
+static bool _hidh_set_protocol(uint8_t dev_addr, uint8_t itf_num, uint8_t protocol, tuh_xfer_cb_t complete_cb, uintptr_t user_data)
+{
   TU_LOG2("HID Set Protocol = %d\r\n", protocol);
 
   tusb_control_request_t const request =
@@ -136,30 +136,47 @@ bool tuh_hid_set_protocol(uint8_t dev_addr, uint8_t instance, uint8_t protocol)
     },
     .bRequest = HID_REQ_CONTROL_SET_PROTOCOL,
     .wValue   = protocol,
-    .wIndex   = hid_itf->itf_num,
+    .wIndex   = itf_num,
     .wLength  = 0
   };
 
-  TU_ASSERT( tuh_control_xfer(dev_addr, &request, NULL, set_protocol_complete) );
+  tuh_xfer_t xfer =
+  {
+    .daddr       = dev_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = NULL,
+    .complete_cb = complete_cb,
+    .user_data   = user_data
+  };
+
+  TU_ASSERT( tuh_control_xfer(&xfer) );
   return true;
 }
 
-static bool set_report_complete(uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+bool tuh_hid_set_protocol(uint8_t dev_addr, uint8_t instance, uint8_t protocol)
+{
+  hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
+  TU_VERIFY(hid_itf->itf_protocol != HID_ITF_PROTOCOL_NONE);
+
+  return _hidh_set_protocol(dev_addr, hid_itf->itf_num, protocol, set_protocol_complete, 0);
+}
+
+static void set_report_complete(tuh_xfer_t* xfer)
 {
   TU_LOG2("HID Set Report complete\r\n");
 
   if (tuh_hid_set_report_complete_cb)
   {
-    uint8_t const itf_num     = (uint8_t) request->wIndex;
-    uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
+    uint8_t const itf_num     = (uint8_t) tu_le16toh(xfer->setup->wIndex);
+    uint8_t const instance    = get_instance_id_by_itfnum(xfer->daddr, itf_num);
 
-    uint8_t const report_type = tu_u16_high(request->wValue);
-    uint8_t const report_id   = tu_u16_low(request->wValue);
+    uint8_t const report_type = tu_u16_high(xfer->setup->wValue);
+    uint8_t const report_id   = tu_u16_low(xfer->setup->wValue);
 
-    tuh_hid_set_report_complete_cb(dev_addr, instance, report_id, report_type, (result == XFER_RESULT_SUCCESS) ? request->wLength : 0);
+    tuh_hid_set_report_complete_cb(xfer->daddr, instance, report_id, report_type,
+                                   (xfer->result == XFER_RESULT_SUCCESS) ? xfer->setup->wLength : 0);
   }
-
-  return true;
 }
 
 bool tuh_hid_set_report(uint8_t dev_addr, uint8_t instance, uint8_t report_id, uint8_t report_type, void* report, uint16_t len)
@@ -181,7 +198,50 @@ bool tuh_hid_set_report(uint8_t dev_addr, uint8_t instance, uint8_t report_id, u
     .wLength  = len
   };
 
-  TU_ASSERT( tuh_control_xfer(dev_addr, &request, report, set_report_complete) );
+  tuh_xfer_t xfer =
+  {
+    .daddr       = dev_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = report,
+    .complete_cb = set_report_complete,
+    .user_data   = 0
+  };
+
+  TU_ASSERT( tuh_control_xfer(&xfer) );
+  return true;
+}
+
+static bool _hidh_set_idle(uint8_t dev_addr, uint8_t itf_num, uint16_t idle_rate, tuh_xfer_cb_t complete_cb, uintptr_t user_data)
+{
+  // SET IDLE request, device can stall if not support this request
+  TU_LOG2("HID Set Idle \r\n");
+  tusb_control_request_t const request =
+  {
+    .bmRequestType_bit =
+    {
+      .recipient = TUSB_REQ_RCPT_INTERFACE,
+      .type      = TUSB_REQ_TYPE_CLASS,
+      .direction = TUSB_DIR_OUT
+    },
+    .bRequest = HID_REQ_CONTROL_SET_IDLE,
+    .wValue   = idle_rate,
+    .wIndex   = itf_num,
+    .wLength  = 0
+  };
+
+  tuh_xfer_t xfer =
+  {
+    .daddr       = dev_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = NULL,
+    .complete_cb = complete_cb,
+    .user_data   = user_data
+  };
+
+  TU_ASSERT( tuh_control_xfer(&xfer) );
+
   return true;
 }
 
@@ -196,7 +256,13 @@ bool tuh_hid_receive_report(uint8_t dev_addr, uint8_t instance)
   // claim endpoint
   TU_VERIFY( usbh_edpt_claim(dev_addr, hid_itf->ep_in) );
 
-  return usbh_edpt_xfer(dev_addr, hid_itf->ep_in, hid_itf->epin_buf, hid_itf->epin_size);
+  if ( !usbh_edpt_xfer(dev_addr, hid_itf->ep_in, hid_itf->epin_buf, hid_itf->epin_size) )
+  {
+    usbh_edpt_claim(dev_addr, hid_itf->ep_in);
+    return false;
+  }
+
+  return true;
 }
 
 //bool tuh_n_hid_n_ready(uint8_t dev_addr, uint8_t instance)
@@ -256,14 +322,9 @@ void hidh_close(uint8_t dev_addr)
 // Enumeration
 //--------------------------------------------------------------------+
 
-static bool config_set_protocol             (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
-static bool config_get_report_desc          (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
-static bool config_get_report_desc_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
-
-static void config_driver_mount_complete(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len);
-
 bool hidh_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *desc_itf, uint16_t max_len)
 {
+  (void) rhport;
   (void) max_len;
 
   TU_VERIFY(TUSB_CLASS_HID == desc_itf->bInterfaceClass);
@@ -286,28 +347,35 @@ bool hidh_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *de
   hidh_device_t* hid_dev = get_dev(dev_addr);
   TU_ASSERT(hid_dev->inst_count < CFG_TUH_HID, 0);
 
-  //------------- Endpoint Descriptor -------------//
+  hidh_interface_t* hid_itf = get_instance(dev_addr, hid_dev->inst_count);  
+
+  //------------- Endpoint Descriptors -------------//
   p_desc = tu_desc_next(p_desc);
   tusb_desc_endpoint_t const * desc_ep = (tusb_desc_endpoint_t const *) p_desc;
-  TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType);
 
-  // first endpoint may be OUT, skip to IN endpoint
-  // TODO also open endpoint OUT
-  if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_OUT)
+  for(int i = 0; i < desc_itf->bNumEndpoints; i++)
   {
+    TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType);
+    TU_ASSERT( tuh_edpt_open(dev_addr, desc_ep) );
+
+    if(tu_edpt_dir(desc_ep->bEndpointAddress) == TUSB_DIR_IN)
+    {
+      hid_itf->ep_in     = desc_ep->bEndpointAddress;
+      hid_itf->epin_size = tu_edpt_packet_size(desc_ep);
+    }
+    else
+    {
+      hid_itf->ep_out     = desc_ep->bEndpointAddress;
+      hid_itf->epout_size = tu_edpt_packet_size(desc_ep);
+    }
+
     p_desc = tu_desc_next(p_desc);
     desc_ep = (tusb_desc_endpoint_t const *) p_desc;
-    TU_ASSERT(TUSB_DESC_ENDPOINT == desc_ep->bDescriptorType);
   }
 
-  TU_ASSERT( usbh_edpt_open(rhport, dev_addr, desc_ep) );
-
-  hidh_interface_t* hid_itf = get_instance(dev_addr, hid_dev->inst_count);
   hid_dev->inst_count++;
 
   hid_itf->itf_num   = desc_itf->bInterfaceNumber;
-  hid_itf->ep_in     = desc_ep->bEndpointAddress;
-  hid_itf->epin_size = tu_edpt_packet_size(desc_ep);
 
   // Assume bNumDescriptors = 1
   hid_itf->report_desc_type = desc_hid->bReportType;
@@ -320,122 +388,93 @@ bool hidh_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *de
   return true;
 }
 
-bool hidh_set_config(uint8_t dev_addr, uint8_t itf_num)
-{
-  uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
-  hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
-
-  // Idle rate = 0 mean only report when there is changes
-  uint16_t const idle_rate = 0;
-
-  // SET IDLE request, device can stall if not support this request
-  TU_LOG2("HID Set Idle \r\n");
-  tusb_control_request_t const request =
-  {
-    .bmRequestType_bit =
-    {
-      .recipient = TUSB_REQ_RCPT_INTERFACE,
-      .type      = TUSB_REQ_TYPE_CLASS,
-      .direction = TUSB_DIR_OUT
-    },
-    .bRequest = HID_REQ_CONTROL_SET_IDLE,
-    .wValue   = idle_rate,
-    .wIndex   = itf_num,
-    .wLength  = 0
-  };
+//--------------------------------------------------------------------+
+// Set Configure
+//--------------------------------------------------------------------+
 
-  TU_ASSERT( tuh_control_xfer(dev_addr, &request, NULL, (hid_itf->itf_protocol != HID_ITF_PROTOCOL_NONE) ? config_set_protocol : config_get_report_desc) );
+enum {
+  CONFG_SET_IDLE,
+  CONFIG_SET_PROTOCOL,
+  CONFIG_GET_REPORT_DESC,
+  CONFIG_COMPLETE
+};
 
-  return true;
-}
+static void config_driver_mount_complete(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len);
+static void process_set_config(tuh_xfer_t* xfer);
 
-// Force device to work in BOOT protocol
-static bool config_set_protocol(uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+bool hidh_set_config(uint8_t dev_addr, uint8_t itf_num)
 {
-  // Stall is a valid response for SET_IDLE, therefore we could ignore its result
-  (void) result;
+  tusb_control_request_t request;
+  request.wIndex = tu_htole16((uint16_t) itf_num);
 
-  uint8_t const itf_num     = (uint8_t) request->wIndex;
-  uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
-  hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
+  tuh_xfer_t xfer;
+  xfer.daddr     = dev_addr;
+  xfer.result    = XFER_RESULT_SUCCESS;
+  xfer.setup     = &request;
+  xfer.user_data = CONFG_SET_IDLE;
 
-  TU_LOG2("HID Set Protocol to Boot Mode\r\n");
-  hid_itf->protocol_mode = HID_PROTOCOL_BOOT;
-  tusb_control_request_t const new_request =
-  {
-    .bmRequestType_bit =
-    {
-      .recipient = TUSB_REQ_RCPT_INTERFACE,
-      .type      = TUSB_REQ_TYPE_CLASS,
-      .direction = TUSB_DIR_OUT
-    },
-    .bRequest = HID_REQ_CONTROL_SET_PROTOCOL,
-    .wValue   = HID_PROTOCOL_BOOT,
-    .wIndex   = hid_itf->itf_num,
-    .wLength  = 0
-  };
+  // fake request to kick-off the set config process
+  process_set_config(&xfer);
 
-  TU_ASSERT( tuh_control_xfer(dev_addr, &new_request, NULL, config_get_report_desc) );
   return true;
 }
 
-static bool config_get_report_desc(uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void process_set_config(tuh_xfer_t* xfer)
 {
-  // We can be here after SET_IDLE or SET_PROTOCOL (boot device)
-  // Trigger assert if result is not successful with set protocol
-  if ( request->bRequest != HID_REQ_CONTROL_SET_IDLE )
+  // Stall is a valid response for SET_IDLE, therefore we could ignore its result
+  if ( xfer->setup->bRequest != HID_REQ_CONTROL_SET_IDLE )
   {
-    TU_ASSERT(result == XFER_RESULT_SUCCESS);
+    TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, );
   }
 
-  uint8_t const itf_num     = (uint8_t) request->wIndex;
-  uint8_t const instance    = get_instance_id_by_itfnum(dev_addr, itf_num);
-  hidh_interface_t* hid_itf = get_instance(dev_addr, instance);
+  uintptr_t const state = xfer->user_data;
+  uint8_t const itf_num = (uint8_t) tu_le16toh(xfer->setup->wIndex);
+  uint8_t const daddr   = xfer->daddr;
 
-  // Get Report Descriptor if possible
-  // using usbh enumeration buffer since report descriptor can be very long
-  if( hid_itf->report_desc_len > CFG_TUH_ENUMERATION_BUFSIZE )
-  {
-    TU_LOG2("HID Skip Report Descriptor since it is too large %u bytes\r\n", hid_itf->report_desc_len);
+  uint8_t const instance    = get_instance_id_by_itfnum(daddr, itf_num);
+  hidh_interface_t* hid_itf = get_instance(daddr, instance);
 
-    // Driver is mounted without report descriptor
-    config_driver_mount_complete(dev_addr, instance, NULL, 0);
-  }else
+  switch(state)
   {
-    TU_LOG2("HID Get Report Descriptor\r\n");
-    tusb_control_request_t const new_request =
+    case CONFG_SET_IDLE:
     {
-      .bmRequestType_bit =
-      {
-        .recipient = TUSB_REQ_RCPT_INTERFACE,
-        .type      = TUSB_REQ_TYPE_STANDARD,
-        .direction = TUSB_DIR_IN
-      },
-      .bRequest = TUSB_REQ_GET_DESCRIPTOR,
-      .wValue   = tu_u16(hid_itf->report_desc_type, 0),
-      .wIndex   = itf_num,
-      .wLength  = hid_itf->report_desc_len
-    };
-
-    TU_ASSERT(tuh_control_xfer(dev_addr, &new_request, usbh_get_enum_buf(), config_get_report_desc_complete));
-  }
+      // Idle rate = 0 mean only report when there is changes
+      const uint16_t idle_rate = 0;
+      const uintptr_t next_state = (hid_itf->itf_protocol != HID_ITF_PROTOCOL_NONE) ? CONFIG_SET_PROTOCOL : CONFIG_GET_REPORT_DESC;
+      _hidh_set_idle(daddr, itf_num, idle_rate, process_set_config, next_state);
+    }
+    break;
 
-  return true;
-}
+    case CONFIG_SET_PROTOCOL:
+      _hidh_set_protocol(daddr, hid_itf->itf_num, HID_PROTOCOL_BOOT, process_set_config, CONFIG_GET_REPORT_DESC);
+    break;
 
-static bool config_get_report_desc_complete(uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
-{
-  TU_ASSERT(XFER_RESULT_SUCCESS == result);
+    case CONFIG_GET_REPORT_DESC:
+      // Get Report Descriptor if possible
+      // using usbh enumeration buffer since report descriptor can be very long
+      if( hid_itf->report_desc_len > CFG_TUH_ENUMERATION_BUFSIZE )
+      {
+        TU_LOG2("HID Skip Report Descriptor since it is too large %u bytes\r\n", hid_itf->report_desc_len);
 
-  uint8_t const itf_num      = (uint8_t) request->wIndex;
-  uint8_t const instance     = get_instance_id_by_itfnum(dev_addr, itf_num);
+        // Driver is mounted without report descriptor
+        config_driver_mount_complete(daddr, instance, NULL, 0);
+      }else
+      {
+        tuh_descriptor_get_hid_report(daddr, itf_num, hid_itf->report_desc_type, 0, usbh_get_enum_buf(), hid_itf->report_desc_len, process_set_config, CONFIG_COMPLETE);
+      }
+      break;
 
-  uint8_t const* desc_report = usbh_get_enum_buf();
-  uint16_t const desc_len    = request->wLength;
+    case CONFIG_COMPLETE:
+    {
+      uint8_t const* desc_report = usbh_get_enum_buf();
+      uint16_t const desc_len    = tu_le16toh(xfer->setup->wLength);
 
-  config_driver_mount_complete(dev_addr, instance, desc_report, desc_len);
+      config_driver_mount_complete(daddr, instance, desc_report, desc_len);
+    }
+    break;
 
-  return true;
+    default: break;
+  }
 }
 
 static void config_driver_mount_complete(uint8_t dev_addr, uint8_t instance, uint8_t const* desc_report, uint16_t desc_len)

src/class/msc/msc_host.c

@@ -358,13 +358,14 @@ bool msch_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t event, uint32
 // MSC Enumeration
 //--------------------------------------------------------------------+
 
-static bool config_get_maxlun_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+static void config_get_maxlun_complete (tuh_xfer_t* xfer);
 static bool config_test_unit_ready_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw);
 static bool config_request_sense_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw);
 static bool config_read_capacity_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw);
 
 bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *desc_itf, uint16_t max_len)
 {
+  (void) rhport;
   TU_VERIFY (MSC_SUBCLASS_SCSI == desc_itf->bInterfaceSubClass &&
              MSC_PROTOCOL_BOT  == desc_itf->bInterfaceProtocol);
 
@@ -378,7 +379,7 @@ bool msch_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *de
   for(uint32_t i=0; i<2; i++)
   {
     TU_ASSERT(TUSB_DESC_ENDPOINT == ep_desc->bDescriptorType && TUSB_XFER_BULK == ep_desc->bmAttributes.xfer);
-    TU_ASSERT(usbh_edpt_open(rhport, dev_addr, ep_desc));
+    TU_ASSERT(tuh_edpt_open(dev_addr, ep_desc));
 
     if ( tu_edpt_dir(ep_desc->bEndpointAddress) == TUSB_DIR_IN )
     {
@@ -405,7 +406,7 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num)
 
   //------------- Get Max Lun -------------//
   TU_LOG2("MSC Get Max Lun\r\n");
-  tusb_control_request_t request =
+  tusb_control_request_t const request =
   {
     .bmRequestType_bit =
     {
@@ -418,27 +419,34 @@ bool msch_set_config(uint8_t dev_addr, uint8_t itf_num)
     .wIndex   = itf_num,
     .wLength  = 1
   };
-  TU_ASSERT(tuh_control_xfer(dev_addr, &request, &p_msc->max_lun, config_get_maxlun_complete));
+
+  tuh_xfer_t xfer =
+  {
+    .daddr       = dev_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = &p_msc->max_lun,
+    .complete_cb = config_get_maxlun_complete,
+    .user_data    = 0
+  };
+  TU_ASSERT(tuh_control_xfer(&xfer));
 
   return true;
 }
 
-static bool config_get_maxlun_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void config_get_maxlun_complete (tuh_xfer_t* xfer)
 {
-  (void) request;
-
-  msch_interface_t* p_msc = get_itf(dev_addr);
+  uint8_t const daddr = xfer->daddr;
+  msch_interface_t* p_msc = get_itf(daddr);
 
   // STALL means zero
-  p_msc->max_lun = (XFER_RESULT_SUCCESS == result) ? _msch_buffer[0] : 0;
+  p_msc->max_lun = (XFER_RESULT_SUCCESS == xfer->result) ? _msch_buffer[0] : 0;
   p_msc->max_lun++; // MAX LUN is minus 1 by specs
 
   // TODO multiple LUN support
   TU_LOG2("SCSI Test Unit Ready\r\n");
   uint8_t const lun = 0;
-  tuh_msc_test_unit_ready(dev_addr, lun, config_test_unit_ready_complete);
-
-  return true;
+  tuh_msc_test_unit_ready(daddr, lun, config_test_unit_ready_complete);
 }
 
 static bool config_test_unit_ready_complete(uint8_t dev_addr, msc_cbw_t const* cbw, msc_csw_t const* csw)
@@ -476,7 +484,7 @@ static bool config_read_capacity_complete(uint8_t dev_addr, msc_cbw_t const* cbw
   // Capacity response field: Block size and Last LBA are both Big-Endian
   scsi_read_capacity10_resp_t* resp = (scsi_read_capacity10_resp_t*) ((void*) _msch_buffer);
   p_msc->capacity[cbw->lun].block_count = tu_ntohl(resp->last_lba) + 1;
-  p_msc->capacity[cbw->lun].block_size = tu_ntohl(resp->block_size);
+  p_msc->capacity[cbw->lun].block_size  = tu_ntohl(resp->block_size);
 
   // Mark enumeration is complete
   p_msc->mounted = true;

src/class/vendor/vendor_device.c

@@ -113,7 +113,7 @@ void tud_vendor_n_read_flush (uint8_t itf)
 //--------------------------------------------------------------------+
 // Write API
 //--------------------------------------------------------------------+
-static bool maybe_transmit(vendord_interface_t* p_itf)
+static uint16_t maybe_transmit(vendord_interface_t* p_itf)
 {
   // skip if previous transfer not complete
   TU_VERIFY( !usbd_edpt_busy(TUD_OPT_RHPORT, p_itf->ep_in) );
@@ -123,14 +123,24 @@ static bool maybe_transmit(vendord_interface_t* p_itf)
   {
     TU_ASSERT( usbd_edpt_xfer(TUD_OPT_RHPORT, p_itf->ep_in, p_itf->epin_buf, count) );
   }
-  return true;
+  return count;
 }
 
 uint32_t tud_vendor_n_write (uint8_t itf, void const* buffer, uint32_t bufsize)
 {
   vendord_interface_t* p_itf = &_vendord_itf[itf];
   uint16_t ret = tu_fifo_write_n(&p_itf->tx_ff, buffer, bufsize);
-  maybe_transmit(p_itf);
+  if (tu_fifo_count(&p_itf->tx_ff) >= CFG_TUD_VENDOR_EPSIZE) {
+    maybe_transmit(p_itf);
+  }
+  return ret;
+}
+
+uint32_t tud_vendor_n_flush (uint8_t itf)
+{
+  vendord_interface_t* p_itf = &_vendord_itf[itf];
+  uint32_t ret = maybe_transmit(p_itf);
+
   return ret;
 }
 
@@ -247,6 +257,7 @@ bool vendord_xfer_cb(uint8_t rhport, uint8_t ep_addr, xfer_result_t result, uint
   }
   else if ( ep_addr == p_itf->ep_in )
   {
+    if (tud_vendor_tx_cb) tud_vendor_tx_cb(itf, xferred_bytes);
     // Send complete, try to send more if possible
     maybe_transmit(p_itf);
   }

src/class/vendor/vendor_device.h

@@ -52,6 +52,7 @@ uint32_t tud_vendor_n_write_available (uint8_t itf);
 
 static inline
 uint32_t tud_vendor_n_write_str       (uint8_t itf, char const* str);
+uint32_t tud_vendor_n_flush           (uint8_t itf);
 
 //--------------------------------------------------------------------+
 // Application API (Single Port)
@@ -64,6 +65,7 @@ static inline void     tud_vendor_read_flush      (void);
 static inline uint32_t tud_vendor_write           (void const* buffer, uint32_t bufsize);
 static inline uint32_t tud_vendor_write_str       (char const* str);
 static inline uint32_t tud_vendor_write_available (void);
+static inline uint32_t tud_vendor_flush           (void);
 
 //--------------------------------------------------------------------+
 // Application Callback API (weak is optional)
@@ -71,6 +73,8 @@ static inline uint32_t tud_vendor_write_available (void);
 
 // Invoked when received new data
 TU_ATTR_WEAK void tud_vendor_rx_cb(uint8_t itf);
+// Invoked when last rx transfer finished
+TU_ATTR_WEAK void tud_vendor_tx_cb(uint8_t itf, uint32_t sent_bytes);
 
 //--------------------------------------------------------------------+
 // Inline Functions
@@ -121,6 +125,11 @@ static inline uint32_t tud_vendor_write_available (void)
   return tud_vendor_n_write_available(0);
 }
 
+static inline uint32_t tud_vendor_flush (void)
+{
+  return tud_vendor_n_flush(0);
+}
+
 //--------------------------------------------------------------------+
 // Internal Class Driver API
 //--------------------------------------------------------------------+

src/class/vendor/vendor_host.h

@@ -49,16 +49,16 @@ static inline bool tusbh_custom_is_mounted(uint8_t dev_addr, uint16_t vendor_id,
   return false;
 }
 
-tusb_error_t tusbh_custom_read(uint8_t dev_addr, uint16_t vendor_id, uint16_t product_id, void * p_buffer, uint16_t length);
-tusb_error_t tusbh_custom_write(uint8_t dev_addr, uint16_t vendor_id, uint16_t product_id, void const * p_data, uint16_t length);
+bool tusbh_custom_read(uint8_t dev_addr, uint16_t vendor_id, uint16_t product_id, void * p_buffer, uint16_t length);
+bool tusbh_custom_write(uint8_t dev_addr, uint16_t vendor_id, uint16_t product_id, void const * p_data, uint16_t length);
 
 //--------------------------------------------------------------------+
 // Internal Class Driver API
 //--------------------------------------------------------------------+
-void         cush_init(void);
-tusb_error_t cush_open_subtask(uint8_t dev_addr, tusb_desc_interface_t const *p_interface_desc, uint16_t *p_length);
-void         cush_isr(pipe_handle_t pipe_hdl, xfer_result_t event);
-void         cush_close(uint8_t dev_addr);
+void cush_init(void);
+bool cush_open_subtask(uint8_t dev_addr, tusb_desc_interface_t const *p_interface_desc, uint16_t *p_length);
+void cush_isr(pipe_handle_t pipe_hdl, xfer_result_t event);
+void cush_close(uint8_t dev_addr);
 
 #ifdef __cplusplus
  }

src/common/tusb_common.h

@@ -38,6 +38,7 @@
 #define TU_MIN(_x, _y)        ( ( (_x) < (_y) ) ? (_x) : (_y) )
 #define TU_MAX(_x, _y)        ( ( (_x) > (_y) ) ? (_x) : (_y) )
 
+#define TU_U16(_high, _low)   ((uint16_t) (((_high) << 8) | (_low)))
 #define TU_U16_HIGH(_u16)     ((uint8_t) (((_u16) >> 8) & 0x00ff))
 #define TU_U16_LOW(_u16)      ((uint8_t) ((_u16)       & 0x00ff))
 #define U16_TO_U8S_BE(_u16)   TU_U16_HIGH(_u16), TU_U16_LOW(_u16)
@@ -70,23 +71,10 @@
 #include "tusb_compiler.h"
 #include "tusb_verify.h"
 #include "tusb_types.h"
+#include "tusb_debug.h"
 
-#include "tusb_error.h"   // TODO remove
 #include "tusb_timeout.h" // TODO remove
 
-//--------------------------------------------------------------------+
-// Internal Helper used by Host and Device Stack
-//--------------------------------------------------------------------+
-
-// Check if endpoint descriptor is valid per USB specs
-bool tu_edpt_validate(tusb_desc_endpoint_t const * desc_ep, tusb_speed_t speed);
-
-// Bind all endpoint of a interface descriptor to class driver
-void tu_edpt_bind_driver(uint8_t ep2drv[][2], tusb_desc_interface_t const* p_desc, uint16_t desc_len, uint8_t driver_id);
-
-// Calculate total length of n interfaces (depending on IAD)
-uint16_t tu_desc_get_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len);
-
 //--------------------------------------------------------------------+
 // Internal Inline Functions
 //--------------------------------------------------------------------+
@@ -267,138 +255,6 @@ TU_ATTR_ALWAYS_INLINE static inline void     tu_unaligned_write16 (void* mem, ui
             + TU_BIN8(dlsb))
 #endif
 
-//--------------------------------------------------------------------+
-// Debug Function
-//--------------------------------------------------------------------+
-
-// CFG_TUSB_DEBUG for debugging
-// 0 : no debug
-// 1 : print error
-// 2 : print warning
-// 3 : print info
-#if CFG_TUSB_DEBUG
-
-void tu_print_mem(void const *buf, uint32_t count, uint8_t indent);
-
-#ifdef CFG_TUSB_DEBUG_PRINTF
-  extern int CFG_TUSB_DEBUG_PRINTF(const char *format, ...);
-  #define tu_printf    CFG_TUSB_DEBUG_PRINTF
-#else
-  #define tu_printf    printf
-#endif
-
-static inline
-void tu_print_var(uint8_t const* buf, uint32_t bufsize)
-{
-  for(uint32_t i=0; i<bufsize; i++) tu_printf("%02X ", buf[i]);
-}
-
-// Log with Level
-#define TU_LOG(n, ...)        TU_XSTRCAT(TU_LOG, n)(__VA_ARGS__)
-#define TU_LOG_MEM(n, ...)    TU_XSTRCAT3(TU_LOG, n, _MEM)(__VA_ARGS__)
-#define TU_LOG_VAR(n, ...)    TU_XSTRCAT3(TU_LOG, n, _VAR)(__VA_ARGS__)
-#define TU_LOG_INT(n, ...)    TU_XSTRCAT3(TU_LOG, n, _INT)(__VA_ARGS__)
-#define TU_LOG_HEX(n, ...)    TU_XSTRCAT3(TU_LOG, n, _HEX)(__VA_ARGS__)
-#define TU_LOG_LOCATION()     tu_printf("%s: %d:\r\n", __PRETTY_FUNCTION__, __LINE__)
-#define TU_LOG_FAILED()       tu_printf("%s: %d: Failed\r\n", __PRETTY_FUNCTION__, __LINE__)
-
-// Log Level 1: Error
-#define TU_LOG1               tu_printf
-#define TU_LOG1_MEM           tu_print_mem
-#define TU_LOG1_VAR(_x)       tu_print_var((uint8_t const*)(_x), sizeof(*(_x)))
-#define TU_LOG1_INT(_x)       tu_printf(#_x " = %ld\r\n", (unsigned long) (_x) )
-#define TU_LOG1_HEX(_x)       tu_printf(#_x " = %lX\r\n", (unsigned long) (_x) )
-
-// Log Level 2: Warn
-#if CFG_TUSB_DEBUG >= 2
-  #define TU_LOG2             TU_LOG1
-  #define TU_LOG2_MEM         TU_LOG1_MEM
-  #define TU_LOG2_VAR         TU_LOG1_VAR
-  #define TU_LOG2_INT         TU_LOG1_INT
-  #define TU_LOG2_HEX         TU_LOG1_HEX
-#endif
-
-// Log Level 3: Info
-#if CFG_TUSB_DEBUG >= 3
-  #define TU_LOG3             TU_LOG1
-  #define TU_LOG3_MEM         TU_LOG1_MEM
-  #define TU_LOG3_VAR         TU_LOG1_VAR
-  #define TU_LOG3_INT         TU_LOG1_INT
-  #define TU_LOG3_HEX         TU_LOG1_HEX
-#endif
-
-typedef struct
-{
-  uint32_t key;
-  const char* data;
-} tu_lookup_entry_t;
-
-typedef struct
-{
-  uint16_t count;
-  tu_lookup_entry_t const* items;
-} tu_lookup_table_t;
-
-static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint32_t key)
-{
-  static char not_found[11];
-
-  for(uint16_t i=0; i<p_table->count; i++)
-  {
-    if (p_table->items[i].key == key) return p_table->items[i].data;
-  }
-
-  // not found return the key value in hex
-  sprintf(not_found, "0x%08lX", (unsigned long) key);
-
-  return not_found;
-}
-
-#endif // CFG_TUSB_DEBUG
-
-#ifndef TU_LOG
-#define TU_LOG(n, ...)
-#define TU_LOG_MEM(n, ...)
-#define TU_LOG_VAR(n, ...)
-#define TU_LOG_INT(n, ...)
-#define TU_LOG_HEX(n, ...)
-#define TU_LOG_LOCATION()
-#define TU_LOG_FAILED()
-#endif
-
-// TODO replace all TU_LOGn with TU_LOG(n)
-
-#define TU_LOG0(...)
-#define TU_LOG0_MEM(...)
-#define TU_LOG0_VAR(...)
-#define TU_LOG0_INT(...)
-#define TU_LOG0_HEX(...)
-
-
-#ifndef TU_LOG1
-  #define TU_LOG1(...)
-  #define TU_LOG1_MEM(...)
-  #define TU_LOG1_VAR(...)
-  #define TU_LOG1_INT(...)
-  #define TU_LOG1_HEX(...)
-#endif
-
-#ifndef TU_LOG2
-  #define TU_LOG2(...)
-  #define TU_LOG2_MEM(...)
-  #define TU_LOG2_VAR(...)
-  #define TU_LOG2_INT(...)
-  #define TU_LOG2_HEX(...)
-#endif
-
-#ifndef TU_LOG3
-  #define TU_LOG3(...)
-  #define TU_LOG3_MEM(...)
-  #define TU_LOG3_VAR(...)
-  #define TU_LOG3_INT(...)
-  #define TU_LOG3_HEX(...)
-#endif
-
 #ifdef __cplusplus
  }
 #endif

src/common/tusb_compiler.h

@@ -51,10 +51,10 @@
 #endif
 
 // Compile-time Assert
-#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 201112L
-  #define TU_VERIFY_STATIC   _Static_assert
-#elif defined (__cplusplus) && __cplusplus >= 201103L
+#if defined (__cplusplus) && __cplusplus >= 201103L
   #define TU_VERIFY_STATIC   static_assert
+#elif defined (__STDC_VERSION__) && __STDC_VERSION__ >= 201112L
+  #define TU_VERIFY_STATIC   _Static_assert
 #elif defined(__CCRX__)
   #define TU_VERIFY_STATIC(const_expr, _mess) typedef char TU_XSTRCAT(Line, __LINE__)[(const_expr) ? 1 : 0];
 #else

src/common/tusb_debug.h

@@ -0,0 +1,174 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#ifndef _TUSB_DEBUG_H_
+#define _TUSB_DEBUG_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+//--------------------------------------------------------------------+
+// Debug
+//--------------------------------------------------------------------+
+
+// CFG_TUSB_DEBUG for debugging
+// 0 : no debug
+// 1 : print error
+// 2 : print warning
+// 3 : print info
+#if CFG_TUSB_DEBUG
+
+// Enum to String for debugging purposes
+#if CFG_TUSB_DEBUG >= 2
+extern char const* const tu_str_speed[];
+extern char const* const tu_str_std_request[];
+#endif
+
+void tu_print_mem(void const *buf, uint32_t count, uint8_t indent);
+
+#ifdef CFG_TUSB_DEBUG_PRINTF
+  extern int CFG_TUSB_DEBUG_PRINTF(const char *format, ...);
+  #define tu_printf    CFG_TUSB_DEBUG_PRINTF
+#else
+  #define tu_printf    printf
+#endif
+
+static inline void tu_print_var(uint8_t const* buf, uint32_t bufsize)
+{
+  for(uint32_t i=0; i<bufsize; i++) tu_printf("%02X ", buf[i]);
+}
+
+// Log with Level
+#define TU_LOG(n, ...)        TU_XSTRCAT(TU_LOG, n)(__VA_ARGS__)
+#define TU_LOG_MEM(n, ...)    TU_XSTRCAT3(TU_LOG, n, _MEM)(__VA_ARGS__)
+#define TU_LOG_VAR(n, ...)    TU_XSTRCAT3(TU_LOG, n, _VAR)(__VA_ARGS__)
+#define TU_LOG_INT(n, ...)    TU_XSTRCAT3(TU_LOG, n, _INT)(__VA_ARGS__)
+#define TU_LOG_HEX(n, ...)    TU_XSTRCAT3(TU_LOG, n, _HEX)(__VA_ARGS__)
+#define TU_LOG_LOCATION()     tu_printf("%s: %d:\r\n", __PRETTY_FUNCTION__, __LINE__)
+#define TU_LOG_FAILED()       tu_printf("%s: %d: Failed\r\n", __PRETTY_FUNCTION__, __LINE__)
+
+// Log Level 1: Error
+#define TU_LOG1               tu_printf
+#define TU_LOG1_MEM           tu_print_mem
+#define TU_LOG1_VAR(_x)       tu_print_var((uint8_t const*)(_x), sizeof(*(_x)))
+#define TU_LOG1_INT(_x)       tu_printf(#_x " = %ld\r\n", (unsigned long) (_x) )
+#define TU_LOG1_HEX(_x)       tu_printf(#_x " = %lX\r\n", (unsigned long) (_x) )
+
+// Log Level 2: Warn
+#if CFG_TUSB_DEBUG >= 2
+  #define TU_LOG2             TU_LOG1
+  #define TU_LOG2_MEM         TU_LOG1_MEM
+  #define TU_LOG2_VAR         TU_LOG1_VAR
+  #define TU_LOG2_INT         TU_LOG1_INT
+  #define TU_LOG2_HEX         TU_LOG1_HEX
+#endif
+
+// Log Level 3: Info
+#if CFG_TUSB_DEBUG >= 3
+  #define TU_LOG3             TU_LOG1
+  #define TU_LOG3_MEM         TU_LOG1_MEM
+  #define TU_LOG3_VAR         TU_LOG1_VAR
+  #define TU_LOG3_INT         TU_LOG1_INT
+  #define TU_LOG3_HEX         TU_LOG1_HEX
+#endif
+
+typedef struct
+{
+  uint32_t key;
+  const char* data;
+} tu_lookup_entry_t;
+
+typedef struct
+{
+  uint16_t count;
+  tu_lookup_entry_t const* items;
+} tu_lookup_table_t;
+
+static inline const char* tu_lookup_find(tu_lookup_table_t const* p_table, uint32_t key)
+{
+  static char not_found[11];
+
+  for(uint16_t i=0; i<p_table->count; i++)
+  {
+    if (p_table->items[i].key == key) return p_table->items[i].data;
+  }
+
+  // not found return the key value in hex
+  snprintf(not_found, sizeof(not_found), "0x%08lX", (unsigned long) key);
+
+  return not_found;
+}
+
+#endif // CFG_TUSB_DEBUG
+
+#ifndef TU_LOG
+  #define TU_LOG(n, ...)
+  #define TU_LOG_MEM(n, ...)
+  #define TU_LOG_VAR(n, ...)
+  #define TU_LOG_INT(n, ...)
+  #define TU_LOG_HEX(n, ...)
+  #define TU_LOG_LOCATION()
+  #define TU_LOG_FAILED()
+#endif
+
+// TODO replace all TU_LOGn with TU_LOG(n)
+
+#define TU_LOG0(...)
+#define TU_LOG0_MEM(...)
+#define TU_LOG0_VAR(...)
+#define TU_LOG0_INT(...)
+#define TU_LOG0_HEX(...)
+
+#ifndef TU_LOG1
+  #define TU_LOG1(...)
+  #define TU_LOG1_MEM(...)
+  #define TU_LOG1_VAR(...)
+  #define TU_LOG1_INT(...)
+  #define TU_LOG1_HEX(...)
+#endif
+
+#ifndef TU_LOG2
+  #define TU_LOG2(...)
+  #define TU_LOG2_MEM(...)
+  #define TU_LOG2_VAR(...)
+  #define TU_LOG2_INT(...)
+  #define TU_LOG2_HEX(...)
+#endif
+
+#ifndef TU_LOG3
+  #define TU_LOG3(...)
+  #define TU_LOG3_MEM(...)
+  #define TU_LOG3_VAR(...)
+  #define TU_LOG3_INT(...)
+  #define TU_LOG3_HEX(...)
+#endif
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_DEBUG_H_ */

src/common/tusb_error.h

@@ -1,77 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-/** \ingroup Group_Common
- *  \defgroup Group_Error Error Codes
- *  @{ */
-
-#ifndef _TUSB_ERRORS_H_
-#define _TUSB_ERRORS_H_
-
-#include "tusb_option.h"
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-#define ERROR_ENUM(x) x,
-#define ERROR_STRING(x) #x,
-
-#define ERROR_TABLE(ENTRY) \
-    ENTRY(TUSB_ERROR_NONE                            )\
-    ENTRY(TUSB_ERROR_INVALID_PARA                    )\
-    ENTRY(TUSB_ERROR_DEVICE_NOT_READY                )\
-    ENTRY(TUSB_ERROR_INTERFACE_IS_BUSY               )\
-    ENTRY(TUSB_ERROR_HCD_OPEN_PIPE_FAILED            )\
-    ENTRY(TUSB_ERROR_OSAL_TIMEOUT                    )\
-    ENTRY(TUSB_ERROR_CDCH_DEVICE_NOT_MOUNTED         )\
-    ENTRY(TUSB_ERROR_MSCH_DEVICE_NOT_MOUNTED         )\
-    ENTRY(TUSB_ERROR_NOT_SUPPORTED                   )\
-    ENTRY(TUSB_ERROR_NOT_ENOUGH_MEMORY               )\
-    ENTRY(TUSB_ERROR_FAILED                          )\
-
-/// \brief Error Code returned
-/// TODO obsolete and to be remove
-typedef enum
-{
-  ERROR_TABLE(ERROR_ENUM)
-  TUSB_ERROR_COUNT
-}tusb_error_t;
-
-#if CFG_TUSB_DEBUG
-/// Enum to String for debugging purposes. Only available if \ref CFG_TUSB_DEBUG > 0
-extern char const* const tusb_strerr[TUSB_ERROR_COUNT];
-extern char const* const tusb_speed_str[];
-
-#endif
-
-#ifdef __cplusplus
- }
-#endif
-
-#endif /* _TUSB_ERRORS_H_ */
-
-/**  @} */

src/common/tusb_mcu.h

@@ -184,6 +184,9 @@
     #define TUP_DCD_ENDPOINT_MAX  8
   #endif
 
+#elif TU_CHECK_MCU(OPT_MCU_STM32WB)
+#define TUP_DCD_ENDPOINT_MAX    8
+
 //------------- Sony -------------//
 #elif TU_CHECK_MCU(OPT_MCU_CXD56)
   #define TUP_DCD_ENDPOINT_MAX    7

src/common/tusb_private.h

@@ -0,0 +1,65 @@
+/*
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2022, Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+
+#ifndef _TUSB_PRIVATE_H_
+#define _TUSB_PRIVATE_H_
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+typedef struct TU_ATTR_PACKED
+{
+  volatile uint8_t busy    : 1;
+  volatile uint8_t stalled : 1;
+  volatile uint8_t claimed : 1;
+}tu_edpt_state_t;
+
+//--------------------------------------------------------------------+
+// Internal Helper used by Host and Device Stack
+//--------------------------------------------------------------------+
+
+// Check if endpoint descriptor is valid per USB specs
+bool tu_edpt_validate(tusb_desc_endpoint_t const * desc_ep, tusb_speed_t speed);
+
+// Bind all endpoint of a interface descriptor to class driver
+void tu_edpt_bind_driver(uint8_t ep2drv[][2], tusb_desc_interface_t const* p_desc, uint16_t desc_len, uint8_t driver_id);
+
+// Calculate total length of n interfaces (depending on IAD)
+uint16_t tu_desc_get_interface_total_len(tusb_desc_interface_t const* desc_itf, uint8_t itf_count, uint16_t max_len);
+
+// Claim an endpoint with provided mutex
+bool tu_edpt_claim(tu_edpt_state_t* ep_state, osal_mutex_t mutex);
+
+// Release an endpoint with provided mutex
+bool tu_edpt_release(tu_edpt_state_t* ep_state, osal_mutex_t mutex);
+
+#ifdef __cplusplus
+ }
+#endif
+
+#endif /* _TUSB_PRIVATE_H_ */

src/common/tusb_types.h

@@ -223,19 +223,13 @@ enum {
 
 #define TUSB_DESC_CONFIG_POWER_MA(x)  ((x)/2)
 
-/// Device State TODO remove
-typedef enum
-{
-  TUSB_DEVICE_STATE_UNPLUG = 0  ,
-  TUSB_DEVICE_STATE_CONFIGURED  ,
-  TUSB_DEVICE_STATE_SUSPENDED   ,
-}tusb_device_state_t;
-
 typedef enum
 {
   XFER_RESULT_SUCCESS,
   XFER_RESULT_FAILED,
   XFER_RESULT_STALLED,
+  XFER_RESULT_TIMEOUT,
+  XFER_RESULT_INVALID
 }xfer_result_t;
 
 enum // TODO remove
@@ -265,6 +259,7 @@ typedef enum
 
 enum
 {
+  CONTROL_STAGE_IDLE,
   CONTROL_STAGE_SETUP,
   CONTROL_STAGE_DATA,
   CONTROL_STAGE_ACK

src/common/tusb_verify.h

@@ -74,10 +74,8 @@
 
 #if CFG_TUSB_DEBUG
   #include <stdio.h>
-  #define _MESS_ERR(_err)   tu_printf("%s %d: failed, error = %s\r\n", __func__, __LINE__, tusb_strerr[_err])
   #define _MESS_FAILED()    tu_printf("%s %d: ASSERT FAILED\r\n", __func__, __LINE__)
 #else
-  #define _MESS_ERR(_err) do {} while (0)
   #define _MESS_FAILED() do {} while (0)
 #endif
 
@@ -144,32 +142,6 @@
 #define TU_ASSERT(...)             GET_3RD_ARG(__VA_ARGS__, ASSERT_2ARGS, ASSERT_1ARGS,UNUSED)(__VA_ARGS__)
 #endif
 
-// TODO remove TU_ASSERT_ERR() later
-
-/*------------- Generator for TU_VERIFY_ERR and TU_VERIFY_ERR_HDLR -------------*/
-#define TU_VERIFY_ERR_DEF2(_error, _handler)  do               \
-{                                                              \
-  uint32_t _err = (uint32_t)(_error);                          \
-  if ( 0 != _err ) { _MESS_ERR(_err); _handler; return _err; } \
-} while(0)
-
-#define TU_VERIFY_ERR_DEF3(_error, _handler, _ret) do          \
-{                                                              \
-  uint32_t _err = (uint32_t)(_error);                          \
-  if ( 0 != _err ) { _MESS_ERR(_err); _handler; return _ret; } \
-} while(0)
-
-/*------------------------------------------------------------------*/
-/* ASSERT Error
- * basically TU_VERIFY Error with TU_BREAKPOINT() as handler
- *------------------------------------------------------------------*/
-#define ASSERT_ERR_1ARGS(_error)         TU_VERIFY_ERR_DEF2(_error, TU_BREAKPOINT())
-#define ASSERT_ERR_2ARGS(_error, _ret)   TU_VERIFY_ERR_DEF3(_error, TU_BREAKPOINT(), _ret)
-
-#ifndef TU_ASSERT_ERR
-#define TU_ASSERT_ERR(...)         GET_3RD_ARG(__VA_ARGS__, ASSERT_ERR_2ARGS, ASSERT_ERR_1ARGS,UNUSED)(__VA_ARGS__)
-#endif
-
 /*------------------------------------------------------------------*/
 /* ASSERT HDLR
  *------------------------------------------------------------------*/

src/device/usbd.c

@@ -29,6 +29,8 @@
 #if CFG_TUD_ENABLED
 
 #include "tusb.h"
+#include "common/tusb_private.h"
+
 #include "device/usbd.h"
 #include "device/usbd_pvt.h"
 #include "device/dcd.h"
@@ -67,17 +69,10 @@ typedef struct
   volatile uint8_t cfg_num; // current active configuration (0x00 is not configured)
   uint8_t speed;
 
-  uint8_t itf2drv[16];     // map interface number to driver (0xff is invalid)
-  uint8_t ep2drv[CFG_TUD_ENDPPOINT_MAX][2]; // map endpoint to driver ( 0xff is invalid )
-
-  struct TU_ATTR_PACKED
-  {
-    volatile bool busy    : 1;
-    volatile bool stalled : 1;
-    volatile bool claimed : 1;
+  uint8_t itf2drv[16];                      // map interface number to driver (0xff is invalid)
+  uint8_t ep2drv[CFG_TUD_ENDPPOINT_MAX][2]; // map endpoint to driver ( 0xff is invalid ), can use only 4-bit each
 
-    // TODO merge ep2drv here, 4-bit should be sufficient
-  }ep_status[CFG_TUD_ENDPPOINT_MAX][2];
+  tu_edpt_state_t ep_status[CFG_TUD_ENDPPOINT_MAX][2];
 
 }usbd_device_t;
 
@@ -273,7 +268,7 @@ enum { RHPORT_INVALID = 0xFFu };
 static uint8_t _usbd_rhport = RHPORT_INVALID;
 
 // Event queue
-// OPT_MODE_DEVICE is used by OS NONE for mutex (disable usb isr)
+// usbd_int_set() is used as mutex in OS NONE config
 OSAL_QUEUE_DEF(usbd_int_set, _usbd_qdef, CFG_TUD_TASK_QUEUE_SZ, dcd_event_t);
 static osal_queue_t _usbd_q;
 
@@ -315,23 +310,6 @@ static char const* const _usbd_event_str[DCD_EVENT_COUNT] =
   "Func Call"
 };
 
-static char const* const _tusb_std_request_str[] =
-{
-  "Get Status"        ,
-  "Clear Feature"     ,
-  "Reserved"          ,
-  "Set Feature"       ,
-  "Reserved"          ,
-  "Set Address"       ,
-  "Get Descriptor"    ,
-  "Set Descriptor"    ,
-  "Get Configuration" ,
-  "Set Configuration" ,
-  "Get Interface"     ,
-  "Set Interface"     ,
-  "Synch Frame"
-};
-
 // for usbd_control to print the name of control complete driver
 void usbd_driver_print_control_complete_name(usbd_control_xfer_cb_t callback)
 {
@@ -407,6 +385,7 @@ bool tud_init (uint8_t rhport)
   if ( tud_inited() ) return true;
 
   TU_LOG2("USBD init\r\n");
+  TU_LOG2_INT(sizeof(usbd_device_t));
 
   tu_varclr(&_usbd_dev);
 
@@ -507,7 +486,7 @@ void tud_task (void)
     switch ( event.event_id )
     {
       case DCD_EVENT_BUS_RESET:
-        TU_LOG2(": %s Speed\r\n", tusb_speed_str[event.bus_reset.speed]);
+        TU_LOG2(": %s Speed\r\n", tu_str_speed[event.bus_reset.speed]);
         usbd_reset(event.rhport);
         _usbd_dev.speed = event.bus_reset.speed;
       break;
@@ -649,7 +628,7 @@ static bool process_control_request(uint8_t rhport, tusb_control_request_t const
 #if CFG_TUSB_DEBUG >= 2
   if (TUSB_REQ_TYPE_STANDARD == p_request->bmRequestType_bit.type && p_request->bRequest <= TUSB_REQ_SYNCH_FRAME)
   {
-    TU_LOG2("  %s", _tusb_std_request_str[p_request->bRequest]);
+    TU_LOG2("  %s", tu_str_std_request[p_request->bRequest]);
     if (TUSB_REQ_GET_DESCRIPTOR != p_request->bRequest) TU_LOG2("\r\n");
   }
 #endif
@@ -1241,52 +1220,30 @@ bool usbd_edpt_claim(uint8_t rhport, uint8_t ep_addr)
   // TODO add this check later, also make sure we don't starve an out endpoint while suspending
   // TU_VERIFY(tud_ready());
 
-  uint8_t const epnum = tu_edpt_number(ep_addr);
-  uint8_t const dir   = tu_edpt_dir(ep_addr);
-
-#if CFG_TUSB_OS != OPT_OS_NONE
-  // pre-check to help reducing mutex lock
-  TU_VERIFY((_usbd_dev.ep_status[epnum][dir].busy == 0) && (_usbd_dev.ep_status[epnum][dir].claimed == 0));
-  osal_mutex_lock(_usbd_mutex, OSAL_TIMEOUT_WAIT_FOREVER);
-#endif
-
-  // can only claim the endpoint if it is not busy and not claimed yet.
-  bool const ret = (_usbd_dev.ep_status[epnum][dir].busy == 0) && (_usbd_dev.ep_status[epnum][dir].claimed == 0);
-  if (ret)
-  {
-    _usbd_dev.ep_status[epnum][dir].claimed = 1;
-  }
+  uint8_t const epnum       = tu_edpt_number(ep_addr);
+  uint8_t const dir         = tu_edpt_dir(ep_addr);
+  tu_edpt_state_t* ep_state = &_usbd_dev.ep_status[epnum][dir];
 
-#if CFG_TUSB_OS != OPT_OS_NONE
-  osal_mutex_unlock(_usbd_mutex);
+#if TUSB_OPT_MUTEX
+  return tu_edpt_claim(ep_state, _usbd_mutex);
+#else
+  return tu_edpt_claim(ep_state, NULL);
 #endif
-
-  return ret;
 }
 
 bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr)
 {
   (void) rhport;
 
-  uint8_t const epnum = tu_edpt_number(ep_addr);
-  uint8_t const dir   = tu_edpt_dir(ep_addr);
-
-#if CFG_TUSB_OS != OPT_OS_NONE
-  osal_mutex_lock(_usbd_mutex, OSAL_TIMEOUT_WAIT_FOREVER);
-#endif
+  uint8_t const epnum       = tu_edpt_number(ep_addr);
+  uint8_t const dir         = tu_edpt_dir(ep_addr);
+  tu_edpt_state_t* ep_state = &_usbd_dev.ep_status[epnum][dir];
 
-  // can only release the endpoint if it is claimed and not busy
-  bool const ret = (_usbd_dev.ep_status[epnum][dir].busy == 0) && (_usbd_dev.ep_status[epnum][dir].claimed == 1);
-  if (ret)
-  {
-    _usbd_dev.ep_status[epnum][dir].claimed = 0;
-  }
-
-#if CFG_TUSB_OS != OPT_OS_NONE
-  osal_mutex_unlock(_usbd_mutex);
+#if TUSB_OPT_MUTEX
+  return tu_edpt_release(ep_state, _usbd_mutex);
+#else
+  return tu_edpt_release(ep_state, NULL);
 #endif
-
-  return ret;
 }
 
 bool usbd_edpt_xfer(uint8_t rhport, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)

src/device/usbd_pvt.h

@@ -80,7 +80,7 @@ bool usbd_edpt_xfer_fifo(uint8_t rhport, uint8_t ep_addr, tu_fifo_t * ff, uint16
 // If caller does not make any transfer, it must release endpoint for others.
 bool usbd_edpt_claim(uint8_t rhport, uint8_t ep_addr);
 
-// Release an endpoint without submitting a transfer
+// Release claimed endpoint without submitting a transfer
 bool usbd_edpt_release(uint8_t rhport, uint8_t ep_addr);
 
 // Check if endpoint is busy transferring

src/host/hcd.h

@@ -35,6 +35,19 @@
  extern "C" {
 #endif
 
+//--------------------------------------------------------------------+
+// Configuration
+//--------------------------------------------------------------------+
+
+#ifndef CFG_TUH_ENDPOINT_MAX
+  #define CFG_TUH_ENDPOINT_MAX   (CFG_TUH_HUB + CFG_TUH_HID*2 + CFG_TUH_MSC*2 + CFG_TUH_CDC*3)
+//  #ifdef TUP_HCD_ENDPOINT_MAX
+//    #define CFG_TUH_ENDPPOINT_MAX   TUP_HCD_ENDPOINT_MAX
+//  #else
+//    #define
+//  #endif
+#endif
+
  //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+
@@ -81,26 +94,14 @@ typedef struct
 
 } hcd_event_t;
 
-#if CFG_TUH_ENABLED
-// Max number of endpoints per device
-enum {
-  // TODO better computation
-  HCD_MAX_ENDPOINT = CFG_TUH_DEVICE_MAX*(CFG_TUH_HUB + CFG_TUH_HID*2 + CFG_TUH_MSC*2 + CFG_TUH_CDC*3),
-  HCD_MAX_XFER     = HCD_MAX_ENDPOINT*2,
-};
-
-//#define HCD_MAX_ENDPOINT 16
-//#define HCD_MAX_XFER 16
-
-typedef struct {
+typedef struct
+{
   uint8_t rhport;
   uint8_t hub_addr;
   uint8_t hub_port;
   uint8_t speed;
 } hcd_devtree_info_t;
 
-#endif
-
 //--------------------------------------------------------------------+
 // Controller API
 //--------------------------------------------------------------------+

src/host/hub.c

@@ -54,7 +54,7 @@ static inline hub_interface_t* get_itf(uint8_t dev_addr)
   return &hub_data[dev_addr-1-CFG_TUH_DEVICE_MAX];
 }
 
-#if CFG_TUSB_DEBUG
+#if CFG_TUSB_DEBUG >= 2
 static char const* const _hub_feature_str[] =
 {
   [HUB_FEATURE_PORT_CONNECTION          ] = "PORT_CONNECTION",
@@ -77,7 +77,8 @@ static char const* const _hub_feature_str[] =
 //--------------------------------------------------------------------+
 // HUB
 //--------------------------------------------------------------------+
-bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, tuh_control_complete_cb_t complete_cb)
+bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
+                            tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
   tusb_control_request_t const request =
   {
@@ -93,12 +94,23 @@ bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
     .wLength  = 0
   };
 
+  tuh_xfer_t xfer =
+  {
+    .daddr       = hub_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = NULL,
+    .complete_cb = complete_cb,
+    .user_data   = user_data
+  };
+
   TU_LOG2("HUB Clear Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port);
-  TU_ASSERT( tuh_control_xfer(hub_addr, &request, NULL, complete_cb) );
+  TU_ASSERT( tuh_control_xfer(&xfer) );
   return true;
 }
 
-bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, tuh_control_complete_cb_t complete_cb)
+bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
+                          tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
   tusb_control_request_t const request =
   {
@@ -114,17 +126,23 @@ bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, t
     .wLength  = 0
   };
 
+  tuh_xfer_t xfer =
+  {
+    .daddr       = hub_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = NULL,
+    .complete_cb = complete_cb,
+    .user_data   = user_data
+  };
+
   TU_LOG2("HUB Set Feature: %s, addr = %u port = %u\r\n", _hub_feature_str[feature], hub_addr, hub_port);
-  TU_ASSERT( tuh_control_xfer(hub_addr, &request, NULL, complete_cb) );
+  TU_ASSERT( tuh_control_xfer(&xfer) );
   return true;
 }
 
-bool hub_port_reset(uint8_t hub_addr, uint8_t hub_port, tuh_control_complete_cb_t complete_cb)
-{
-  return hub_port_set_feature(hub_addr, hub_port, HUB_FEATURE_PORT_RESET, complete_cb);
-}
-
-bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, tuh_control_complete_cb_t complete_cb)
+bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp,
+                         tuh_xfer_cb_t complete_cb, uintptr_t user_data)
 {
   tusb_control_request_t const request =
   {
@@ -140,8 +158,18 @@ bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, tuh_con
     .wLength  = 4
   };
 
+  tuh_xfer_t xfer =
+  {
+    .daddr       = hub_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = resp,
+    .complete_cb = complete_cb,
+    .user_data   = user_data
+  };
+
   TU_LOG2("HUB Get Port Status: addr = %u port = %u\r\n", hub_addr, hub_port);
-  TU_ASSERT( tuh_control_xfer( hub_addr, &request, resp, complete_cb) );
+  TU_ASSERT( tuh_control_xfer(&xfer) );
   return true;
 }
 
@@ -155,6 +183,8 @@ void hub_init(void)
 
 bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf_desc, uint16_t max_len)
 {
+  (void) rhport;
+
   TU_VERIFY(TUSB_CLASS_HUB == itf_desc->bInterfaceClass &&
             0              == itf_desc->bInterfaceSubClass);
 
@@ -171,7 +201,7 @@ bool hub_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_interface_t const *itf
   TU_ASSERT(TUSB_DESC_ENDPOINT  == desc_ep->bDescriptorType &&
             TUSB_XFER_INTERRUPT == desc_ep->bmAttributes.xfer, 0);
   
-  TU_ASSERT(usbh_edpt_open(rhport, dev_addr, desc_ep));
+  TU_ASSERT(tuh_edpt_open(dev_addr, desc_ep));
 
   hub_interface_t* p_hub = get_itf(dev_addr);
 
@@ -189,7 +219,7 @@ void hub_close(uint8_t dev_addr)
   if (p_hub->ep_in) tu_memclr(p_hub, sizeof( hub_interface_t));
 }
 
-bool hub_status_pipe_queue(uint8_t dev_addr)
+bool hub_edpt_status_xfer(uint8_t dev_addr)
 {
   hub_interface_t* hub_itf = get_itf(dev_addr);
   return usbh_edpt_xfer(dev_addr, hub_itf->ep_in, &hub_itf->status_change, 1);
@@ -200,8 +230,8 @@ bool hub_status_pipe_queue(uint8_t dev_addr)
 // Set Configure
 //--------------------------------------------------------------------+
 
-static bool config_set_port_power (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
-static bool config_port_power_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+static void config_set_port_power (tuh_xfer_t* xfer);
+static void config_port_power_complete (tuh_xfer_t* xfer);
 
 bool hub_set_config(uint8_t dev_addr, uint8_t itf_num)
 {
@@ -223,17 +253,27 @@ bool hub_set_config(uint8_t dev_addr, uint8_t itf_num)
     .wLength  = sizeof(descriptor_hub_desc_t)
   };
 
-  TU_ASSERT( tuh_control_xfer(dev_addr, &request, _hub_buffer, config_set_port_power) );
+  tuh_xfer_t xfer =
+  {
+    .daddr       = dev_addr,
+    .ep_addr     = 0,
+    .setup       = &request,
+    .buffer      = _hub_buffer,
+    .complete_cb = config_set_port_power,
+    .user_data    = 0
+  };
+
+  TU_ASSERT( tuh_control_xfer(&xfer) );
 
   return true;
 }
 
-static bool config_set_port_power (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void config_set_port_power (tuh_xfer_t* xfer)
 {
-  (void) request;
-  TU_ASSERT(XFER_RESULT_SUCCESS == result);
+  TU_ASSERT(XFER_RESULT_SUCCESS == xfer->result, );
 
-  hub_interface_t* p_hub = get_itf(dev_addr);
+  uint8_t const daddr = xfer->daddr;
+  hub_interface_t* p_hub = get_itf(daddr);
 
   // only use number of ports in hub descriptor
   descriptor_hub_desc_t const* desc_hub = (descriptor_hub_desc_t const*) _hub_buffer;
@@ -243,38 +283,38 @@ static bool config_set_port_power (uint8_t dev_addr, tusb_control_request_t cons
 
   // Set Port Power to be able to detect connection, starting with port 1
   uint8_t const hub_port = 1;
-  return hub_port_set_feature(dev_addr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete);
+  hub_port_set_feature(daddr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete, 0);
 }
 
-static bool config_port_power_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void config_port_power_complete (tuh_xfer_t* xfer)
 {
-  TU_ASSERT(XFER_RESULT_SUCCESS == result);
-   hub_interface_t* p_hub = get_itf(dev_addr);
+  TU_ASSERT(XFER_RESULT_SUCCESS == xfer->result, );
+
+  uint8_t const daddr = xfer->daddr;
+  hub_interface_t* p_hub = get_itf(daddr);
 
-  if (request->wIndex == p_hub->port_count)
+  if (xfer->setup->wIndex == p_hub->port_count)
   {
     // All ports are power -> queue notification status endpoint and
     // complete the SET CONFIGURATION
-    TU_ASSERT( usbh_edpt_xfer(dev_addr, p_hub->ep_in, &p_hub->status_change, 1) );
+    TU_ASSERT( usbh_edpt_xfer(daddr, p_hub->ep_in, &p_hub->status_change, 1), );
 
-    usbh_driver_set_config_complete(dev_addr, p_hub->itf_num);
+    usbh_driver_set_config_complete(daddr, p_hub->itf_num);
   }else
   {
     // power next port
-    uint8_t const hub_port = (uint8_t) (request->wIndex + 1);
-    return hub_port_set_feature(dev_addr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete);
+    uint8_t const hub_port = (uint8_t) (xfer->setup->wIndex + 1);
+    hub_port_set_feature(daddr, hub_port, HUB_FEATURE_PORT_POWER, config_port_power_complete, 0);
   }
-
-  return true;
 }
 
 //--------------------------------------------------------------------+
 // Connection Changes
 //--------------------------------------------------------------------+
 
-static bool connection_get_status_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
-static bool connection_clear_conn_change_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
-static bool connection_port_reset_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+static void connection_get_status_complete (tuh_xfer_t* xfer);
+static void connection_clear_conn_change_complete (tuh_xfer_t* xfer);
+static void connection_port_reset_complete (tuh_xfer_t* xfer);
 
 // callback as response of interrupt endpoint polling
 bool hub_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes)
@@ -292,7 +332,7 @@ bool hub_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32
   {
     if ( tu_bit_test(p_hub->status_change, port) )
     {
-      hub_port_get_status(dev_addr, port, &p_hub->port_status, connection_get_status_complete);
+      hub_port_get_status(dev_addr, port, &p_hub->port_status, connection_get_status_complete, 0);
       break;
     }
   }
@@ -302,12 +342,13 @@ bool hub_xfer_cb(uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32
   return true;
 }
 
-static bool connection_get_status_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void connection_get_status_complete (tuh_xfer_t* xfer)
 {
-  TU_ASSERT(result == XFER_RESULT_SUCCESS);
+  TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, );
 
-  hub_interface_t* p_hub = get_itf(dev_addr);
-  uint8_t const port_num = (uint8_t) request->wIndex;
+  uint8_t const daddr = xfer->daddr;
+  hub_interface_t* p_hub = get_itf(daddr);
+  uint8_t const port_num = (uint8_t) tu_le16toh(xfer->setup->wIndex);
 
   // Connection change
   if (p_hub->port_status.change.connection)
@@ -316,7 +357,7 @@ static bool connection_get_status_complete (uint8_t dev_addr, tusb_control_reque
     //TU_VERIFY(port_status.status_current.port_power && port_status.status_current.port_enable, );
 
     // Acknowledge Port Connection Change
-    hub_port_clear_feature(dev_addr, port_num, HUB_FEATURE_PORT_CONNECTION_CHANGE, connection_clear_conn_change_complete);
+    hub_port_clear_feature(daddr, port_num, HUB_FEATURE_PORT_CONNECTION_CHANGE, connection_clear_conn_change_complete, 0);
   }else
   {
     // Other changes are: Enable, Suspend, Over Current, Reset, L1 state
@@ -324,65 +365,61 @@ static bool connection_get_status_complete (uint8_t dev_addr, tusb_control_reque
 
     // prepare for next hub status
     // TODO continue with status_change, or maybe we can do it again with status
-    hub_status_pipe_queue(dev_addr);
+    hub_edpt_status_xfer(daddr);
   }
-
-  return true;
 }
 
-static bool connection_clear_conn_change_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void connection_clear_conn_change_complete (tuh_xfer_t* xfer)
 {
-  TU_ASSERT(result == XFER_RESULT_SUCCESS);
+  TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, );
 
-  hub_interface_t* p_hub = get_itf(dev_addr);
-  uint8_t const port_num = (uint8_t) request->wIndex;
+  uint8_t const daddr = xfer->daddr;
+  hub_interface_t* p_hub = get_itf(daddr);
+  uint8_t const port_num = (uint8_t) tu_le16toh(xfer->setup->wIndex);
 
   if ( p_hub->port_status.status.connection )
   {
     // Reset port if attach event
-    hub_port_reset(dev_addr, port_num, connection_port_reset_complete);
+    hub_port_reset(daddr, port_num, connection_port_reset_complete, 0);
   }else
   {
     // submit detach event
     hcd_event_t event =
     {
-      .rhport     = usbh_get_rhport(dev_addr),
+      .rhport     = usbh_get_rhport(daddr),
       .event_id   = HCD_EVENT_DEVICE_REMOVE,
       .connection =
        {
-         .hub_addr = dev_addr,
+         .hub_addr = daddr,
          .hub_port = port_num
        }
     };
 
     hcd_event_handler(&event, false);
   }
-
-  return true;
 }
 
-static bool connection_port_reset_complete (uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result)
+static void connection_port_reset_complete (tuh_xfer_t* xfer)
 {
-  TU_ASSERT(result == XFER_RESULT_SUCCESS);
+  TU_ASSERT(xfer->result == XFER_RESULT_SUCCESS, );
 
-  // hub_interface_t* p_hub = get_itf(dev_addr);
-  uint8_t const port_num = (uint8_t) request->wIndex;
+  uint8_t const daddr = xfer->daddr;
+  // hub_interface_t* p_hub = get_itf(daddr);
+  uint8_t const port_num = (uint8_t) tu_le16toh(xfer->setup->wIndex);
 
   // submit attach event
   hcd_event_t event =
   {
-    .rhport     = usbh_get_rhport(dev_addr),
+    .rhport     = usbh_get_rhport(daddr),
     .event_id   = HCD_EVENT_DEVICE_ATTACH,
     .connection =
     {
-      .hub_addr = dev_addr,
+      .hub_addr = daddr,
       .hub_port = port_num
     }
   };
 
   hcd_event_handler(&event, false);
-
-  return true;
 }
 
 #endif

src/host/hub.h

@@ -171,12 +171,35 @@ typedef struct {
 
 TU_VERIFY_STATIC( sizeof(hub_port_status_response_t) == 4, "size is not correct");
 
-bool hub_port_clear_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, tuh_control_complete_cb_t complete_cb);
-bool hub_port_set_feature(uint8_t hub_addr, uint8_t hub_port, uint8_t feature, tuh_control_complete_cb_t complete_cb);
+// Clear feature
+bool hub_port_clear_feature (uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
+                             tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Set feature
+bool hub_port_set_feature   (uint8_t hub_addr, uint8_t hub_port, uint8_t feature,
+                             tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get port status
+bool hub_port_get_status    (uint8_t hub_addr, uint8_t hub_port, void* resp,
+                             tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get status from Interrupt endpoint
+bool hub_edpt_status_xfer(uint8_t dev_addr);
+
+// Reset a port
+static inline bool hub_port_reset(uint8_t hub_addr, uint8_t hub_port,
+                                  tuh_xfer_cb_t complete_cb, uintptr_t user_data)
+{
+  return hub_port_set_feature(hub_addr, hub_port, HUB_FEATURE_PORT_RESET, complete_cb, user_data);
+}
+
+// Clear Reset Change
+static inline bool hub_port_clear_reset_change(uint8_t hub_addr, uint8_t hub_port,
+                                               tuh_xfer_cb_t complete_cb, uintptr_t user_data)
+{
+  return hub_port_clear_feature(hub_addr, hub_port, HUB_FEATURE_PORT_RESET_CHANGE, complete_cb, user_data);
+}
 
-bool hub_port_reset(uint8_t hub_addr, uint8_t hub_port, tuh_control_complete_cb_t complete_cb);
-bool hub_port_get_status(uint8_t hub_addr, uint8_t hub_port, void* resp, tuh_control_complete_cb_t complete_cb);
-bool hub_status_pipe_queue(uint8_t dev_addr);
 
 //--------------------------------------------------------------------+
 // Internal Class Driver API

src/host/usbh.h

@@ -38,7 +38,48 @@
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+
 
-typedef bool (*tuh_control_complete_cb_t)(uint8_t dev_addr, tusb_control_request_t const * request, xfer_result_t result);
+// forward declaration
+struct tuh_xfer_s;
+typedef struct tuh_xfer_s tuh_xfer_t;
+
+typedef void (*tuh_xfer_cb_t)(tuh_xfer_t* xfer);
+
+// Note1: layout and order of this will be changed in near future
+// it is advised to initialize it using member name
+// Note2: not all field is available/meaningful in callback, some info is not saved by
+// usbh to save SRAM
+struct tuh_xfer_s
+{
+  uint8_t daddr;
+  uint8_t ep_addr;
+
+  xfer_result_t result;
+  uint32_t actual_len;      // excluding setup packet
+
+  union
+  {
+    tusb_control_request_t const* setup; // setup packet pointer if control transfer
+    uint32_t buflen;        // expected length if not control transfer (not available in callback)
+  };
+
+  uint8_t* buffer;           // not available in callback if not control transfer
+  tuh_xfer_cb_t complete_cb;
+  uintptr_t user_data;
+
+  // uint32_t timeout_ms;    // place holder, not supported yet
+};
+
+//--------------------------------------------------------------------+
+// APPLICATION CALLBACK
+//--------------------------------------------------------------------+
+
+//TU_ATTR_WEAK uint8_t tuh_attach_cb (tusb_desc_device_t const *desc_device);
+
+// Invoked when device is mounted (configured)
+TU_ATTR_WEAK void tuh_mount_cb (uint8_t daddr);
+
+/// Invoked when device is unmounted (bus reset/unplugged)
+TU_ATTR_WEAK void tuh_umount_cb(uint8_t daddr);
 
 //--------------------------------------------------------------------+
 // APPLICATION API
@@ -57,40 +98,132 @@ void tuh_task(void);
 extern void hcd_int_handler(uint8_t rhport);
 #define tuh_int_handler   hcd_int_handler
 
-bool tuh_vid_pid_get(uint8_t dev_addr, uint16_t* vid, uint16_t* pid);
-tusb_speed_t tuh_speed_get(uint8_t dev_addr);
+bool tuh_vid_pid_get(uint8_t daddr, uint16_t* vid, uint16_t* pid);
+
+tusb_speed_t tuh_speed_get(uint8_t daddr);
 
 // Check if device is connected and configured
-bool tuh_mounted(uint8_t dev_addr);
+bool tuh_mounted(uint8_t daddr);
 
 // Check if device is suspended
-static inline bool tuh_suspended(uint8_t dev_addr)
+TU_ATTR_ALWAYS_INLINE
+static inline bool tuh_suspended(uint8_t daddr)
 {
   // TODO implement suspend & resume on host
-  (void) dev_addr;
+  (void) daddr;
   return false;
 }
 
 // Check if device is ready to communicate with
 TU_ATTR_ALWAYS_INLINE
-static inline bool tuh_ready(uint8_t dev_addr)
+static inline bool tuh_ready(uint8_t daddr)
 {
-  return tuh_mounted(dev_addr) && !tuh_suspended(dev_addr);
+  return tuh_mounted(daddr) && !tuh_suspended(daddr);
 }
 
-// Carry out control transfer
-bool tuh_control_xfer (uint8_t dev_addr, tusb_control_request_t const* request, void* buffer, tuh_control_complete_cb_t complete_cb);
+//--------------------------------------------------------------------+
+// Transfer API
+//--------------------------------------------------------------------+
+
+// Submit a control transfer
+//  - async: complete callback invoked when finished.
+//  - sync : blocking if complete callback is NULL.
+bool tuh_control_xfer(tuh_xfer_t* xfer);
+
+// Submit a bulk/interrupt transfer
+//  - async: complete callback invoked when finished.
+//  - sync : blocking if complete callback is NULL.
+bool tuh_edpt_xfer(tuh_xfer_t* xfer);
+
+// Open an non-control endpoint
+bool tuh_edpt_open(uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep);
+
+// Set Configuration (control transfer)
+// config_num = 0 will un-configure device. Note: config_num = config_descriptor_index + 1
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_configuration_set(uint8_t daddr, uint8_t config_num,
+                           tuh_xfer_cb_t complete_cb, uintptr_t user_data);
 
 //--------------------------------------------------------------------+
-// APPLICATION CALLBACK
+// Descriptors Asynchronous (non-blocking)
 //--------------------------------------------------------------------+
-//TU_ATTR_WEAK uint8_t tuh_attach_cb (tusb_desc_device_t const *desc_device);
 
-// Invoked when device is mounted (configured)
-TU_ATTR_WEAK void tuh_mount_cb (uint8_t dev_addr);
+// Get an descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_descriptor_get(uint8_t daddr, uint8_t type, uint8_t index, void* buffer, uint16_t len,
+                        tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get device descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_descriptor_get_device(uint8_t daddr, void* buffer, uint16_t len,
+                               tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get configuration descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_descriptor_get_configuration(uint8_t daddr, uint8_t index, void* buffer, uint16_t len,
+                                      tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get HID report descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_descriptor_get_hid_report(uint8_t daddr, uint8_t itf_num, uint8_t desc_type, uint8_t index, void* buffer, uint16_t len,
+                                   tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get string descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+// Blocking if complete callback is NULL, in this case 'user_data' must contain xfer_result_t variable
+bool tuh_descriptor_get_string(uint8_t daddr, uint8_t index, uint16_t language_id, void* buffer, uint16_t len,
+                               tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get manufacturer string descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_descriptor_get_manufacturer_string(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len,
+                                            tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get product string descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_descriptor_get_product_string(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len,
+                                       tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+// Get serial string descriptor (control transfer)
+// true on success, false if there is on-going control transfer or incorrect parameters
+bool tuh_descriptor_get_serial_string(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len,
+                                      tuh_xfer_cb_t complete_cb, uintptr_t user_data);
 
-/// Invoked when device is unmounted (bus reset/unplugged)
-TU_ATTR_WEAK void tuh_umount_cb(uint8_t dev_addr);
+//--------------------------------------------------------------------+
+// Descriptors Synchronous (blocking)
+//--------------------------------------------------------------------+
+
+// Sync (blocking) version of tuh_descriptor_get()
+// return transfer result
+uint8_t tuh_descriptor_get_sync(uint8_t daddr, uint8_t type, uint8_t index, void* buffer, uint16_t len);
+
+// Sync (blocking) version of tuh_descriptor_get_device()
+// return transfer result
+uint8_t tuh_descriptor_get_device_sync(uint8_t daddr, void* buffer, uint16_t len);
+
+// Sync (blocking) version of tuh_descriptor_get_configuration()
+// return transfer result
+uint8_t tuh_descriptor_get_configuration_sync(uint8_t daddr, uint8_t index, void* buffer, uint16_t len);
+
+// Sync (blocking) version of tuh_descriptor_get_hid_report()
+// return transfer result
+uint8_t tuh_descriptor_get_hid_report_sync(uint8_t daddr, uint8_t itf_num, uint8_t desc_type, uint8_t index, void* buffer, uint16_t len);
+
+// Sync (blocking) version of tuh_descriptor_get_string()
+// return transfer result
+uint8_t tuh_descriptor_get_string_sync(uint8_t daddr, uint8_t index, uint16_t language_id, void* buffer, uint16_t len);
+
+// Sync (blocking) version of tuh_descriptor_get_manufacturer_string()
+// return transfer result
+uint8_t tuh_descriptor_get_manufacturer_string_sync(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len);
+
+// Sync (blocking) version of tuh_descriptor_get_product_string()
+// return transfer result
+uint8_t tuh_descriptor_get_product_string_sync(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len);
+
+// Sync (blocking) version of tuh_descriptor_get_serial_string()
+// return transfer result
+uint8_t tuh_descriptor_get_serial_string_sync(uint8_t daddr, uint16_t language_id, void* buffer, uint16_t len);
 
 #ifdef __cplusplus
  }

src/host/usbh_classdriver.h

@@ -63,16 +63,22 @@ void usbh_int_set(bool enabled);
 // USBH Endpoint API
 //--------------------------------------------------------------------+
 
-// Open an endpoint
-bool usbh_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const * desc_ep);
+// Submit a usb transfer with callback support, require CFG_TUH_API_EDPT_XFER
+bool usbh_edpt_xfer_with_callback(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes,
+                                  tuh_xfer_cb_t complete_cb, uintptr_t user_data);
+
+TU_ATTR_ALWAYS_INLINE
+static inline bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes)
+{
+  return usbh_edpt_xfer_with_callback(dev_addr, ep_addr, buffer, total_bytes, NULL, 0);
+}
 
-// Submit a usb transfer
-bool usbh_edpt_xfer(uint8_t dev_addr, uint8_t ep_addr, uint8_t * buffer, uint16_t total_bytes);
 
 // Claim an endpoint before submitting a transfer.
 // If caller does not make any transfer, it must release endpoint for others.
 bool usbh_edpt_claim(uint8_t dev_addr, uint8_t ep_addr);
 
+// Release claimed endpoint without submitting a transfer
 bool usbh_edpt_release(uint8_t dev_addr, uint8_t ep_addr);
 
 // Check if endpoint transferring is complete

src/host/usbh_control.c

@@ -1,145 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2020, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "tusb_option.h"
-
-#if CFG_TUH_ENABLED
-
-#include "tusb.h"
-#include "usbh_classdriver.h"
-
-enum
-{
-  STAGE_SETUP,
-  STAGE_DATA,
-  STAGE_ACK
-};
-
-typedef struct
-{
-  tusb_control_request_t request TU_ATTR_ALIGNED(4);
-
-  uint8_t stage;
-  uint8_t* buffer;
-  tuh_control_complete_cb_t complete_cb;
-} usbh_control_xfer_t;
-
-static usbh_control_xfer_t _ctrl_xfer;
-
-//CFG_TUSB_MEM_SECTION CFG_TUSB_MEM_ALIGN
-//static uint8_t _tuh_ctrl_buf[CFG_TUH_ENUMERATION_BUFSIZE];
-
-//--------------------------------------------------------------------+
-// MACRO TYPEDEF CONSTANT ENUM DECLARATION
-//--------------------------------------------------------------------+
-
-bool tuh_control_xfer (uint8_t dev_addr, tusb_control_request_t const* request, void* buffer, tuh_control_complete_cb_t complete_cb)
-{
-  // TODO need to claim the endpoint first
-  const uint8_t rhport = usbh_get_rhport(dev_addr);
-
-  _ctrl_xfer.request     = (*request);
-  _ctrl_xfer.buffer      = buffer;
-  _ctrl_xfer.stage       = STAGE_SETUP;
-  _ctrl_xfer.complete_cb = complete_cb;
-
-  TU_LOG2("Control Setup (addr = %u): ", dev_addr);
-  TU_LOG2_VAR(request);
-  TU_LOG2("\r\n");
-
-  // Send setup packet
-  if ( hcd_edpt_control_xfer )
-  {
-    _ctrl_xfer.stage = STAGE_ACK;
-    TU_ASSERT( hcd_edpt_control_xfer(rhport, dev_addr, (uint8_t const*) &_ctrl_xfer.request, buffer) );
-  }else
-  {
-    TU_ASSERT( hcd_setup_send(rhport, dev_addr, (uint8_t const*) &_ctrl_xfer.request) );
-  }
-
-  return true;
-}
-
-static void _xfer_complete(uint8_t dev_addr, xfer_result_t result)
-{
-  TU_LOG2("\r\n");
-  if (_ctrl_xfer.complete_cb) _ctrl_xfer.complete_cb(dev_addr, &_ctrl_xfer.request, result);
-}
-
-bool usbh_control_xfer_cb (uint8_t dev_addr, uint8_t ep_addr, xfer_result_t result, uint32_t xferred_bytes)
-{
-  (void) ep_addr;
-  (void) xferred_bytes;
-
-  const uint8_t rhport = usbh_get_rhport(dev_addr);
-
-  tusb_control_request_t const * request = &_ctrl_xfer.request;
-
-  if (XFER_RESULT_SUCCESS != result)
-  {
-    TU_LOG2("Control failed: result = %d\r\n", result);
-
-    // terminate transfer if any stage failed
-    _xfer_complete(dev_addr, result);
-  }else
-  {
-    switch(_ctrl_xfer.stage)
-    {
-      case STAGE_SETUP:
-        _ctrl_xfer.stage = STAGE_DATA;
-        if (request->wLength)
-        {
-          // DATA stage: initial data toggle is always 1
-          hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, request->bmRequestType_bit.direction), _ctrl_xfer.buffer, request->wLength);
-          return true;
-        }
-        __attribute__((fallthrough));
-
-      case STAGE_DATA:
-        _ctrl_xfer.stage = STAGE_ACK;
-
-        if (request->wLength)
-        {
-          TU_LOG2("Control data (addr = %u):\r\n", dev_addr);
-          TU_LOG2_MEM(_ctrl_xfer.buffer, request->wLength, 2);
-        }
-
-        // ACK stage: toggle is always 1
-        hcd_edpt_xfer(rhport, dev_addr, tu_edpt_addr(0, 1-request->bmRequestType_bit.direction), NULL, 0);
-      break;
-
-      case STAGE_ACK:
-        _xfer_complete(dev_addr, result);
-      break;
-
-      default: return false;
-    }
-  }
-
-  return true;
-}
-
-#endif

src/osal/osal_none.h

@@ -111,7 +111,7 @@ typedef struct
 
 typedef osal_queue_def_t* osal_queue_t;
 
-// role device/host is used by OS NONE for mutex (disable usb isr) only
+// _int_set is used as mutex in OS NONE (disable/enable USB ISR)
 #define OSAL_QUEUE_DEF(_int_set, _name, _depth, _type)    \
   uint8_t _name##_buf[_depth*sizeof(_type)];              \
   osal_queue_def_t _name = {                              \

src/portable/chipidea/ci_hs/hcd_ci_hs.c

@@ -35,6 +35,7 @@
 // INCLUDE
 //--------------------------------------------------------------------+
 #include "common/tusb_common.h"
+#include "host/hcd.h"
 #include "portable/ehci/ehci_api.h"
 #include "ci_hs_type.h"
 

src/portable/ehci/ehci.c

@@ -58,6 +58,9 @@
 
 #define FRAMELIST_SIZE                  (1024 >> FRAMELIST_SIZE_BIT_VALUE)
 
+#define QHD_MAX      (CFG_TUH_DEVICE_MAX*CFG_TUH_ENDPOINT_MAX)
+#define QTD_MAX      QHD_MAX
+
 typedef struct
 {
   ehci_link_t period_framelist[FRAMELIST_SIZE];
@@ -73,8 +76,8 @@ typedef struct
     ehci_qtd_t qtd;
   }control[CFG_TUH_DEVICE_MAX+CFG_TUH_HUB+1];
 
-  ehci_qhd_t qhd_pool[HCD_MAX_ENDPOINT];
-  ehci_qtd_t qtd_pool[HCD_MAX_XFER] TU_ATTR_ALIGNED(32);
+  ehci_qhd_t qhd_pool[QHD_MAX];
+  ehci_qtd_t qtd_pool[QTD_MAX] TU_ATTR_ALIGNED(32);
 
   ehci_registers_t* regs;
 
@@ -189,7 +192,11 @@ static void list_remove_qhd_by_addr(ehci_link_t* list_head, uint8_t dev_addr)
       prev = list_next(prev) )
   {
     // TODO check type for ISO iTD and siTD
+    // TODO Suppress cast-align warning
+    #pragma GCC diagnostic push
+    #pragma GCC diagnostic ignored "-Wcast-align"
     ehci_qhd_t* qhd = (ehci_qhd_t*) list_next(prev);
+    #pragma GCC diagnostic pop
     if ( qhd->dev_addr == dev_addr )
     {
       // TODO deactive all TD, wait for QHD to inactive before removal
@@ -474,7 +481,7 @@ static void async_advance_isr(uint8_t rhport)
   (void) rhport;
 
   ehci_qhd_t* qhd_pool = ehci_data.qhd_pool;
-  for(uint32_t i = 0; i < HCD_MAX_ENDPOINT; i++)
+  for(uint32_t i = 0; i < QHD_MAX; i++)
   {
     if ( qhd_pool[i].removing )
     {
@@ -542,7 +549,7 @@ static void period_list_xfer_complete_isr(uint8_t hostid, uint32_t interval_ms)
   // TODO abstract max loop guard for period
   while( !next_item.terminate &&
       !(interval_ms > 1 && period_1ms_addr == tu_align32(next_item.address)) &&
-      max_loop < (HCD_MAX_ENDPOINT + EHCI_MAX_ITD + EHCI_MAX_SITD)*CFG_TUH_DEVICE_MAX)
+      max_loop < (QHD_MAX + EHCI_MAX_ITD + EHCI_MAX_SITD)*CFG_TUH_DEVICE_MAX)
   {
     switch ( next_item.type )
     {
@@ -649,6 +656,26 @@ static void xfer_error_isr(uint8_t hostid)
   }
 }
 
+#if CFG_TUSB_DEBUG >= EHCI_DBG
+
+static inline void print_portsc(ehci_registers_t* regs)
+{
+  TU_LOG_HEX(EHCI_DBG, regs->portsc);
+  TU_LOG(EHCI_DBG, "  Current Connect Status: %u\r\n", regs->portsc_bm.current_connect_status);
+  TU_LOG(EHCI_DBG, "  Connect Status Change : %u\r\n", regs->portsc_bm.connect_status_change);
+  TU_LOG(EHCI_DBG, "  Port Enabled          : %u\r\n", regs->portsc_bm.port_enabled);
+  TU_LOG(EHCI_DBG, "  Port Enabled Change   : %u\r\n", regs->portsc_bm.port_enable_change);
+
+  TU_LOG(EHCI_DBG, "  Port Reset            : %u\r\n", regs->portsc_bm.port_reset);
+  TU_LOG(EHCI_DBG, "  Port Power            : %u\r\n", regs->portsc_bm.port_power);
+}
+
+#else
+
+#define print_portsc(_reg)
+
+#endif
+
 //------------- Host Controller Driver's Interrupt Handler -------------//
 void hcd_int_handler(uint8_t rhport)
 {
@@ -668,9 +695,8 @@ void hcd_int_handler(uint8_t rhport)
 
   if (int_status & EHCI_INT_MASK_PORT_CHANGE)
   {
-    uint32_t port_status = regs->portsc & EHCI_PORTSC_MASK_ALL;
-
-    TU_LOG_HEX(EHCI_DBG, regs->portsc);
+    uint32_t const port_status = regs->portsc & EHCI_PORTSC_MASK_ALL;
+    print_portsc(regs);
 
     if (regs->portsc_bm.connect_status_change)
     {
@@ -714,7 +740,7 @@ void hcd_int_handler(uint8_t rhport)
 //------------- queue head helper -------------//
 static inline ehci_qhd_t* qhd_find_free (void)
 {
-  for (uint32_t i=0; i<HCD_MAX_ENDPOINT; i++)
+  for (uint32_t i=0; i<QHD_MAX; i++)
   {
     if ( !ehci_data.qhd_pool[i].used ) return &ehci_data.qhd_pool[i];
   }
@@ -731,7 +757,7 @@ static inline ehci_qhd_t* qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr)
 {
   ehci_qhd_t* qhd_pool = ehci_data.qhd_pool;
 
-  for(uint32_t i=0; i<HCD_MAX_ENDPOINT; i++)
+  for(uint32_t i=0; i<QHD_MAX; i++)
   {
     if ( (qhd_pool[i].dev_addr == dev_addr) &&
           ep_addr == tu_edpt_addr(qhd_pool[i].ep_number, qhd_pool[i].pid) )
@@ -746,7 +772,7 @@ static inline ehci_qhd_t* qhd_get_from_addr(uint8_t dev_addr, uint8_t ep_addr)
 //------------- TD helper -------------//
 static inline ehci_qtd_t* qtd_find_free(void)
 {
-  for (uint32_t i=0; i<HCD_MAX_XFER; i++)
+  for (uint32_t i=0; i<QTD_MAX; i++)
   {
     if ( !ehci_data.qtd_pool[i].used ) return &ehci_data.qtd_pool[i];
   }

src/portable/ehci/ehci.h

@@ -101,8 +101,8 @@ typedef struct
 
 	// Word 2: qTQ Token
 	volatile uint32_t ping_err             : 1  ; ///< For Highspeed: 0 Out, 1 Ping. Full/Slow used as error indicator
-	volatile uint32_t non_hs_split_state   : 1  ; ///< Used by HC to track the state of slipt transaction
-	volatile uint32_t non_hs_missed_uframe : 1  ; ///< HC misses a complete slip transaction
+	volatile uint32_t non_hs_split_state   : 1  ; ///< Used by HC to track the state of split transaction
+	volatile uint32_t non_hs_missed_uframe : 1  ; ///< HC misses a complete split transaction
 	volatile uint32_t xact_err             : 1  ; ///< Error (Timeout, CRC, Bad PID ... )
 	volatile uint32_t babble_err           : 1  ; ///< Babble detected, also set Halted bit to 1
 	volatile uint32_t buffer_err           : 1  ; ///< Data overrun/underrun error

src/portable/espressif/esp32sx/dcd_esp32sx.c

@@ -34,7 +34,6 @@
 #include "freertos/xtensa_api.h"
 #include "esp_intr_alloc.h"
 #include "esp_log.h"
-#include "driver/gpio.h"
 #include "soc/dport_reg.h"
 #include "soc/gpio_sig_map.h"
 #include "soc/usb_periph.h"

src/portable/nxp/khci/hcd_khci.c

@@ -125,7 +125,7 @@ typedef struct
     uint16_t            bda[2*2];
   };
   endpoint_state_t endpoint[2];
-  pipe_state_t pipe[HCD_MAX_XFER * 2];
+  pipe_state_t pipe[CFG_TUH_ENDPOINT_MAX * 2];
   uint32_t     in_progress; /* Bitmap. Each bit indicates that a transfer of the corresponding pipe is in progress */
   uint32_t     pending;     /* Bitmap. Each bit indicates that a transfer of the corresponding pipe will be resume the next frame */
   bool         need_reset;  /* The device has not been reset after connection. */
@@ -142,7 +142,7 @@ int find_pipe(uint8_t dev_addr, uint8_t ep_addr)
 {
   /* Find the target pipe */
   int num;
-  for (num = 0; num < HCD_MAX_XFER * 2; ++num) {
+  for (num = 0; num < CFG_TUH_ENDPOINT_MAX * 2; ++num) {
     pipe_state_t *p = &_hcd.pipe[num];
     if ((p->dev_addr == dev_addr) && (p->ep_addr == ep_addr))
       return num;
@@ -463,7 +463,7 @@ void hcd_device_close(uint8_t rhport, uint8_t dev_addr)
   const unsigned ie = NVIC_GetEnableIRQ(USB0_IRQn);
   NVIC_DisableIRQ(USB0_IRQn);
   pipe_state_t *p   = &_hcd.pipe[0];
-  pipe_state_t *end = &_hcd.pipe[HCD_MAX_XFER * 2];
+  pipe_state_t *end = &_hcd.pipe[CFG_TUH_ENDPOINT_MAX * 2];
   for (;p != end; ++p) {
     if (p->dev_addr == dev_addr)
       tu_memclr(p, sizeof(*p));
@@ -511,7 +511,7 @@ bool hcd_edpt_open(uint8_t rhport, uint8_t dev_addr, tusb_desc_endpoint_t const
   // TU_LOG1("O %u %x\n", dev_addr, ep_addr);
   /* Find a free pipe */
   pipe_state_t *p = &_hcd.pipe[0];
-  pipe_state_t *end = &_hcd.pipe[HCD_MAX_XFER * 2];
+  pipe_state_t *end = &_hcd.pipe[CFG_TUH_ENDPOINT_MAX * 2];
   if (dev_addr || ep_addr) {
     p += 2;
     for (; p < end && (p->dev_addr || p->ep_addr); ++p) ;

src/portable/ohci/ohci.c

@@ -318,7 +318,7 @@ static ohci_ed_t * ed_from_addr(uint8_t dev_addr, uint8_t ep_addr)
 
   ohci_ed_t* ed_pool = ohci_data.ed_pool;
 
-  for(uint32_t i=0; i<HCD_MAX_ENDPOINT; i++)
+  for(uint32_t i=0; i<ED_MAX; i++)
   {
     if ( (ed_pool[i].dev_addr == dev_addr) &&
           ep_addr == tu_edpt_addr(ed_pool[i].ep_number, ed_pool[i].pid == PID_IN) )
@@ -334,7 +334,7 @@ static ohci_ed_t * ed_find_free(void)
 {
   ohci_ed_t* ed_pool = ohci_data.ed_pool;
 
-  for(uint8_t i = 0; i < HCD_MAX_ENDPOINT; i++)
+  for(uint8_t i = 0; i < ED_MAX; i++)
   {
     if ( !ed_pool[i].used ) return &ed_pool[i];
   }
@@ -373,7 +373,7 @@ static void ed_list_remove_by_addr(ohci_ed_t * p_head, uint8_t dev_addr)
 
 static ohci_gtd_t * gtd_find_free(void)
 {
-  for(uint8_t i=0; i < HCD_MAX_XFER; i++)
+  for(uint8_t i=0; i < GTD_MAX; i++)
   {
     if ( !ohci_data.gtd_pool[i].used ) return &ohci_data.gtd_pool[i];
   }

src/portable/ohci/ohci.h

@@ -42,6 +42,9 @@ enum {
   OHCI_MAX_ITD = 4
 };
 
+#define ED_MAX       (CFG_TUH_DEVICE_MAX*CFG_TUH_ENDPOINT_MAX)
+#define GTD_MAX      ED_MAX
+
 //--------------------------------------------------------------------+
 // OHCI Data Structure
 //--------------------------------------------------------------------+
@@ -162,8 +165,8 @@ typedef struct TU_ATTR_ALIGNED(256)
   }control[CFG_TUH_DEVICE_MAX+CFG_TUH_HUB+1];
 
   //  ochi_itd_t itd[OHCI_MAX_ITD]; // itd requires alignment of 32
-  ohci_ed_t ed_pool[HCD_MAX_ENDPOINT];
-  ohci_gtd_t gtd_pool[HCD_MAX_XFER];
+  ohci_ed_t ed_pool[ED_MAX];
+  ohci_gtd_t gtd_pool[GTD_MAX];
 
   volatile uint16_t frame_number_hi;
 

src/portable/raspberrypi/rp2040/hcd_rp2040.c

@@ -329,9 +329,11 @@ static void _hw_endpoint_init(struct hw_endpoint *ep, uint8_t dev_addr, uint8_t
         // endpoint number / direction
         // preamble
         uint32_t reg = dev_addr | (num << USB_ADDR_ENDP1_ENDPOINT_LSB);
-        // Assert the interrupt endpoint is IN_TO_HOST
-        // TODO Interrupt can also be OUT
-        assert(dir == TUSB_DIR_IN);
+
+        if (dir == TUSB_DIR_OUT)
+        {
+            reg |= USB_ADDR_ENDP1_INTEP_DIR_BITS;
+        }
 
         if (need_pre(dev_addr))
         {

src/portable/raspberrypi/rp2040/rp2040_usb.c

@@ -58,8 +58,12 @@ void rp2040_usb_init(void)
   unreset_block_wait(RESETS_RESET_USBCTRL_BITS);
 
   // Clear any previous state just in case
+  // TODO Suppress warning array-bounds with gcc11
+#pragma GCC diagnostic push
+#pragma GCC diagnostic ignored "-Warray-bounds"
   memset(usb_hw, 0, sizeof(*usb_hw));
   memset(usb_dpram, 0, sizeof(*usb_dpram));
+#pragma GCC diagnostic pop
 
   // Mux the controller to the onboard usb phy
   usb_hw->muxing = USB_USB_MUXING_TO_PHY_BITS | USB_USB_MUXING_SOFTCON_BITS;

src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c

@@ -110,7 +110,7 @@
 #endif
 
 #if CFG_TUD_ENABLED && \
-      ( TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32F3, OPT_MCU_STM32L0, OPT_MCU_STM32L1, OPT_MCU_STM32G4) || \
+      ( TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32F3, OPT_MCU_STM32L0, OPT_MCU_STM32L1, OPT_MCU_STM32G4, OPT_MCU_STM32WB) || \
         (TU_CHECK_MCU(OPT_MCU_STM32F1) && defined(STM32F1_FSDEV)) \
       )
 
@@ -328,6 +328,10 @@ void dcd_int_enable (uint8_t rhport)
   NVIC_EnableIRQ(USB_LP_IRQn);
   NVIC_EnableIRQ(USBWakeUp_IRQn);
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32WB
+  NVIC_EnableIRQ(USB_HP_IRQn);
+  NVIC_EnableIRQ(USB_LP_IRQn);
+
 #else
   #error Unknown arch in USB driver
 #endif
@@ -370,6 +374,10 @@ void dcd_int_disable(uint8_t rhport)
   NVIC_DisableIRQ(USB_LP_IRQn);
   NVIC_DisableIRQ(USBWakeUp_IRQn);
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32WB
+  NVIC_DisableIRQ(USB_HP_IRQn);
+  NVIC_DisableIRQ(USB_LP_IRQn);
+
 #else
   #error Unknown arch in USB driver
 #endif

src/portable/st/stm32_fsdev/dcd_stm32_fsdev_pvt_st.h

@@ -91,6 +91,13 @@
   #include "stm32g4xx.h"
   #define PMA_LENGTH (1024u)
 
+#elif CFG_TUSB_MCU == OPT_MCU_STM32WB
+  #include "stm32wbxx.h"
+  #define PMA_LENGTH (1024u)
+  /* ST provided header has incorrect value */
+  #undef USB_PMAADDR
+  #define USB_PMAADDR USB1_PMAADDR
+
 #else
   #error You are using an untested or unimplemented STM32 variant. Please update the driver.
   // This includes L1x0, L1x1, L1x2, L4x2 and L4x3, G1x1, G1x3, and G1x4

src/portable/synopsys/dwc2/dwc2_type.h

@@ -986,16 +986,16 @@ TU_VERIFY_STATIC(offsetof(dwc2_regs_t, fifo   ) == 0x1000, "incorrect size");
 
 /********************  Bit definition for OTG register  ********************/
 #define GNPTXFSIZ_NPTXFSA_Pos            (0U)
-#define GNPTXFSIZ_NPTXFSA_Msk            (0xFFFFUL << NPTXFSA_Pos)                // 0x0000FFFF */
+#define GNPTXFSIZ_NPTXFSA_Msk            (0xFFFFUL << GNPTXFSIZ_NPTXFSA_Pos)                // 0x0000FFFF */
 #define GNPTXFSIZ_NPTXFSA                GNPTXFSIZ_NPTXFSA_Msk                    // Nonperiodic transmit RAM start address */
 #define GNPTXFSIZ_NPTXFD_Pos             (16U)
-#define GNPTXFSIZ_NPTXFD_Msk             (0xFFFFUL << NPTXFD_Pos)                 // 0xFFFF0000 */
+#define GNPTXFSIZ_NPTXFD_Msk             (0xFFFFUL << GNPTXFSIZ_NPTXFD_Pos)                 // 0xFFFF0000 */
 #define GNPTXFSIZ_NPTXFD                 GNPTXFSIZ_NPTXFD_Msk                     // Nonperiodic TxFIFO depth               */
 #define DIEPTXF0_TX0FSA_Pos              (0U)
-#define DIEPTXF0_TX0FSA_Msk              (0xFFFFUL << TX0FSA_Pos)                 // 0x0000FFFF */
+#define DIEPTXF0_TX0FSA_Msk              (0xFFFFUL << DIEPTXF0_TX0FSA_Pos)                 // 0x0000FFFF */
 #define DIEPTXF0_TX0FSA                  DIEPTXF0_TX0FSA_Msk                      // Endpoint 0 transmit RAM start address  */
 #define DIEPTXF0_TX0FD_Pos               (16U)
-#define DIEPTXF0_TX0FD_Msk               (0xFFFFUL << TX0FD_Pos)                  // 0xFFFF0000 */
+#define DIEPTXF0_TX0FD_Msk               (0xFFFFUL << DIEPTXF0_TX0FD_Pos)                  // 0xFFFF0000 */
 #define DIEPTXF0_TX0FD                   DIEPTXF0_TX0FD_Msk                       // Endpoint 0 TxFIFO depth                */
 
 /********************  Bit definition for DVBUSPULSE register  ********************/

src/tusb.c

@@ -29,6 +29,7 @@
 #if CFG_TUH_ENABLED || CFG_TUD_ENABLED
 
 #include "tusb.h"
+#include "common/tusb_private.h"
 
 // TODO clean up
 #if CFG_TUD_ENABLED
@@ -67,6 +68,52 @@ bool tusb_inited(void)
 // Internal Helper for both Host and Device stack
 //--------------------------------------------------------------------+
 
+bool tu_edpt_claim(tu_edpt_state_t* ep_state, osal_mutex_t mutex)
+{
+  (void) mutex;
+
+#if TUSB_OPT_MUTEX
+  // pre-check to help reducing mutex lock
+  TU_VERIFY((ep_state->busy == 0) && (ep_state->claimed == 0));
+  osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER);
+#endif
+
+  // can only claim the endpoint if it is not busy and not claimed yet.
+  bool const available = (ep_state->busy == 0) && (ep_state->claimed == 0);
+  if (available)
+  {
+    ep_state->claimed = 1;
+  }
+
+#if TUSB_OPT_MUTEX
+  osal_mutex_unlock(mutex);
+#endif
+
+  return available;
+}
+
+bool tu_edpt_release(tu_edpt_state_t* ep_state, osal_mutex_t mutex)
+{
+  (void) mutex;
+
+#if TUSB_OPT_MUTEX
+  osal_mutex_lock(mutex, OSAL_TIMEOUT_WAIT_FOREVER);
+#endif
+
+  // can only release the endpoint if it is claimed and not busy
+  bool const ret = (ep_state->claimed == 1) && (ep_state->busy == 0);
+  if (ret)
+  {
+    ep_state->claimed = 0;
+  }
+
+#if TUSB_OPT_MUTEX
+  osal_mutex_unlock(mutex);
+#endif
+
+  return ret;
+}
+
 bool tu_edpt_validate(tusb_desc_endpoint_t const * desc_ep, tusb_speed_t speed)
 {
   uint16_t const max_packet_size = tu_edpt_packet_size(desc_ep);
@@ -161,9 +208,27 @@ uint16_t tu_desc_get_interface_total_len(tusb_desc_interface_t const* desc_itf,
 #if CFG_TUSB_DEBUG
 #include <ctype.h>
 
-char const* const tusb_strerr[TUSB_ERROR_COUNT] = { ERROR_TABLE(ERROR_STRING) };
+#if CFG_TUSB_DEBUG >= 2
 
-char const* const tusb_speed_str[] = { "Full", "Low", "High" };
+char const* const tu_str_speed[] = { "Full", "Low", "High" };
+char const* const tu_str_std_request[] =
+{
+  "Get Status"        ,
+  "Clear Feature"     ,
+  "Reserved"          ,
+  "Set Feature"       ,
+  "Reserved"          ,
+  "Set Address"       ,
+  "Get Descriptor"    ,
+  "Set Descriptor"    ,
+  "Get Configuration" ,
+  "Set Configuration" ,
+  "Get Interface"     ,
+  "Set Interface"     ,
+  "Synch Frame"
+};
+
+#endif
 
 static void dump_str_line(uint8_t const* buf, uint16_t count)
 {

src/tusb.h

@@ -38,6 +38,8 @@
 #include "osal/osal.h"
 #include "common/tusb_fifo.h"
 
+#include "class/hid/hid.h"
+
 //------------- HOST -------------//
 #if CFG_TUH_ENABLED
   #include "host/usbh.h"
@@ -117,8 +119,6 @@
 //--------------------------------------------------------------------+
 // APPLICATION API
 //--------------------------------------------------------------------+
-/** \ingroup group_application_api
- *  @{ */
 
 // Initialize device/host stack
 // Note: when using with RTOS, this should be called after scheduler/kernel is started.
@@ -131,8 +131,6 @@ bool tusb_inited(void);
 // TODO
 // bool tusb_teardown(void);
 
-/** @} */
-
 #ifdef __cplusplus
  }
 #endif

src/tusb_option.h

@@ -80,6 +80,7 @@
 #define OPT_MCU_STM32L4           309 ///< ST L4
 #define OPT_MCU_STM32G0           310 ///< ST G0
 #define OPT_MCU_STM32G4           311 ///< ST G4
+#define OPT_MCU_STM32WB           312 ///< ST WB
 
 // Sony
 #define OPT_MCU_CXD56             400 ///< SONY CXD56
@@ -207,18 +208,23 @@
 //------------- Roothub as Device -------------//
 
 #if (CFG_TUSB_RHPORT0_MODE) & OPT_MODE_DEVICE
-  #define TUD_RHPORT_MODE  (CFG_TUSB_RHPORT0_MODE)
-  #define TUD_OPT_RHPORT   0
+  #define TUD_RHPORT_MODE     (CFG_TUSB_RHPORT0_MODE)
+  #define TUD_OPT_RHPORT      0
 #elif (CFG_TUSB_RHPORT1_MODE) & OPT_MODE_DEVICE
-  #define TUD_RHPORT_MODE  (CFG_TUSB_RHPORT1_MODE)
-  #define TUD_OPT_RHPORT   1
+  #define TUD_RHPORT_MODE     (CFG_TUSB_RHPORT1_MODE)
+  #define TUD_OPT_RHPORT      1
 #else
-  #define TUD_RHPORT_MODE   OPT_MODE_NONE
-  #define TUD_OPT_RHPORT   -1
+  #define TUD_RHPORT_MODE     OPT_MODE_NONE
+  #define TUD_OPT_RHPORT      -1
 #endif
 
-#define CFG_TUD_ENABLED     ( TUD_RHPORT_MODE & OPT_MODE_DEVICE )
-#define TUD_OPT_HIGH_SPEED  ( (TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (TUP_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT)) )
+#define CFG_TUD_ENABLED       (TUD_RHPORT_MODE & OPT_MODE_DEVICE)
+
+#if CFG_TUD_ENABLED
+  #define TUD_OPT_HIGH_SPEED  ((TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (TUP_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT)))
+#else
+  #define TUD_OPT_HIGH_SPEED  0
+#endif
 
 //------------- Roothub as Host -------------//
 
@@ -383,11 +389,16 @@
 #define CFG_TUH_VENDOR 0
 #endif
 
+#ifndef CFG_TUH_API_EDPT_XFER
+#define CFG_TUH_API_EDPT_XFER 0
+#endif
+
 // Enable PIO-USB software host controller
 #ifndef CFG_TUH_RPI_PIO_USB
 #define CFG_TUH_RPI_PIO_USB 0
 #endif
 
+
 //------------------------------------------------------------------
 // Configuration Validation
 //------------------------------------------------------------------