Merge pull request #87 from hathach/add-stm32f411disco

Add stm32f411disco board

examples/device/cdc_msc_hid/ses/stm32f4/stm32f4.emProject

@@ -61,8 +61,8 @@
       recurse="No" />
     <folder Name="hw">
       <folder Name="bsp">
-        <folder Name="stm32f407g_disc1">
-          <file file_name="../../../../../hw/bsp/stm32f407g_disc1/board_stm32f407g_disc1.c" />
+        <folder Name="stm32f407disco">
+          <file file_name="../../../../../hw/bsp/stm32f407disco/board_stm32f407disco.c" />
         </folder>
         <file file_name="../../../../../hw/bsp/board.h" />
       </folder>
@@ -76,11 +76,11 @@
       </folder>
     </folder>
     <configuration
-      Name="stm32f407g_disc1"
+      Name="stm32f407disco"
       c_preprocessor_definitions="BOARD_STM32F407G_DISC1" />
   </project>
   <configuration
-    Name="stm32f407g_disc1"
+    Name="stm32f407disco"
     c_preprocessor_definitions="DEBUG"
     gcc_debugging_level="Level 3"
     gcc_optimization_level="None" />

examples/device/midi_test/src/usb_descriptors.c

@@ -71,10 +71,13 @@ enum
   CONFIG_TOTAL_LEN = TUD_CONFIG_DESC_LEN + TUD_MIDI_DESC_LEN
 };
 
-// Use Endpoint 2 instead of 1 due to NXP MCU
-// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-#define EPNUM_MIDI   0x02
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_MIDI   0x02
+#else
+  #define EPNUM_MIDI   0x01
+#endif
 
 uint8_t const desc_configuration[] =
 {

examples/device/msc_dual_lun/src/usb_descriptors.c

@@ -68,10 +68,13 @@ enum
   CONFIG_TOTAL_LEN = TUD_CONFIG_DESC_LEN + TUD_MSC_DESC_LEN
 };
 
-// Use Endpoint 2 instead of 1 due to NXP MCU
-// LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
-// 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
-#define EPNUM_MSC   0x02
+#if CFG_TUSB_MCU == OPT_MCU_LPC175X_6X || CFG_TUSB_MCU == OPT_MCU_LPC177X_8X || CFG_TUSB_MCU == OPT_MCU_LPC40XX
+  // LPC 17xx and 40xx endpoint type (bulk/interrupt/iso) are fixed by its number
+  // 0 control, 1 In, 2 Bulk, 3 Iso, 4 In etc ...
+  #define EPNUM_MSC   0x02
+#else
+  #define EPNUM_MSC   0x01
+#endif
 
 uint8_t const desc_configuration[] =
 {

hw/bsp/stm32f303disc/board.mk → hw/bsp/stm32f303disco/board.mk

@@ -10,7 +10,7 @@ CFLAGS += \
 	-nostdlib -nostartfiles
 
 # All source paths should be relative to the top level.
-LD_FILE = hw/bsp/stm32f303disc/STM32F303VCTx_FLASH.ld
+LD_FILE = hw/bsp/stm32f303disco/STM32F303VCTx_FLASH.ld
 
 SRC_C += \
 	hw/mcu/st/system-init/system_stm32f3xx.c \
@@ -23,7 +23,7 @@ SRC_S += \
 	hw/mcu/st/startup/stm32f3/startup_stm32f303xc.s
 
 INC += \
-	$(TOP)/hw/bsp/stm32f303disc \
+	$(TOP)/hw/bsp/stm32f303disco \
 	$(TOP)/hw/mcu/st/cmsis \
 	$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F3xx/Include \
 	$(TOP)/hw/mcu/st/stm32lib/STM32F3xx_HAL_Driver/Inc

hw/bsp/stm32f303disc/board_stm32f303disc.c → hw/bsp/stm32f303disco/board_stm32f303disco.c

@@ -29,8 +29,17 @@
 #include "stm32f3xx.h"
 #include "stm32f3xx_hal_conf.h"
 
+#define LED_PORT  GPIOE
+#define LED_PIN   GPIO_PIN_9
+
 void board_init(void)
 {
+  #if CFG_TUSB_OS  == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+  #endif
+
+  /* Configure the system clock to 72 MHz */
   RCC_ClkInitTypeDef RCC_ClkInitStruct;
   RCC_OscInitTypeDef RCC_OscInitStruct;
 
@@ -55,22 +64,18 @@ void board_init(void)
   // Notify runtime of frequency change.
   SystemCoreClockUpdate();
 
-  #if CFG_TUSB_OS  == OPT_OS_NONE
-  // 1ms tick timer
-  SysTick_Config(SystemCoreClock / 1000);
-  #endif
-
-  /* -1- Enable GPIOE Clock (to be able to program the configuration registers) */
+  /* -1- Enable GPIO Clock (to be able to program the configuration registers) */
   __HAL_RCC_GPIOE_CLK_ENABLE();
 
   /* -2- Configure PE.8 to PE.15 IOs in output push-pull mode to drive external LEDs */
-  static GPIO_InitTypeDef  GPIO_InitStruct;
-  GPIO_InitStruct.Pin = GPIO_PIN_9;
+  GPIO_InitTypeDef  GPIO_InitStruct;
+  GPIO_InitStruct.Pin = LED_PIN;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
   GPIO_InitStruct.Pull = GPIO_PULLUP;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
+  HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
 
-  HAL_GPIO_Init(GPIOE, &GPIO_InitStruct);
+  board_led_write(false);
 
 #if 0
   RCC->AHB2ENR |= RCC_AHB2ENR_OTGFSEN;
@@ -97,7 +102,7 @@ void board_init(void)
 
 void board_led_write(bool state)
 {
-  HAL_GPIO_WritePin(GPIOE, GPIO_PIN_9, state);
+  HAL_GPIO_WritePin(LED_PORT, LED_PIN, state);
 }
 
 uint32_t board_button_read(void)

hw/bsp/stm32f407g_disc1/board.mk → hw/bsp/stm32f407disco/board.mk

@@ -10,17 +10,23 @@ CFLAGS += \
   -DCFG_TUSB_MCU=OPT_MCU_STM32F4
 
 # All source paths should be relative to the top level.
-LD_FILE = hw/bsp/stm32f407g_disc1/STM32F407VGTx_FLASH.ld
+LD_FILE = hw/bsp/stm32f407disco/STM32F407VGTx_FLASH.ld
 
 SRC_C += \
-	hw/mcu/st/system-init/system_stm32f4xx.c
+	hw/mcu/st/system-init/system_stm32f4xx.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c	
 
 SRC_S += \
 	hw/mcu/st/startup/stm32f4/startup_stm32f407xx.s
 
 INC += \
+	$(TOP)/hw/mcu/st/cmsis \
 	$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F4xx/Include \
-	$(TOP)/hw/mcu/st/cmsis
+	$(TOP)/hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Inc \
+	$(TOP)/hw/bsp/stm32f407disco
 
 # For TinyUSB port source
 VENDOR = st

hw/bsp/stm32f407disco/board_stm32f407disco.c

@@ -0,0 +1,188 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "../board.h"
+
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal_conf.h"
+
+#define LED_PORT  GPIOD
+#define LED_PIN   GPIO_PIN_14
+
+/**
+  * @brief  System Clock Configuration
+  *         The system Clock is configured as follow :
+  *            System Clock source            = PLL (HSE)
+  *            SYSCLK(Hz)                     = 168000000
+  *            HCLK(Hz)                       = 168000000
+  *            AHB Prescaler                  = 1
+  *            APB1 Prescaler                 = 4
+  *            APB2 Prescaler                 = 2
+  *            HSE Frequency(Hz)              = 8000000
+  *            PLL_M                          = 8
+  *            PLL_N                          = 336
+  *            PLL_P                          = 2
+  *            PLL_Q                          = 7
+  *            VDD(V)                         = 3.3
+  *            Main regulator output voltage  = Scale1 mode
+  *            Flash Latency(WS)              = 5
+  * @param  None
+  * @retval None
+  */
+static void SystemClock_Config(void)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  /* Enable Power Control clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* The voltage scaling allows optimizing the power consumption when the device is
+     clocked below the maximum system frequency, to update the voltage scaling value
+     regarding system frequency refer to product datasheet.  */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
+
+  /* Enable HSE Oscillator and activate PLL with HSE as source */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 8;
+  RCC_OscInitStruct.PLL.PLLN = 336;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
+     clocks dividers */
+  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5);
+}
+
+void board_init(void)
+{
+#if CFG_TUSB_OS  == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
+#endif
+
+  SystemClock_Config();
+
+  // Notify runtime of frequency change.
+  SystemCoreClockUpdate();
+
+  // Enable USB OTG clock
+  __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+
+  GPIO_InitTypeDef  GPIO_InitStruct;
+
+  // USB Pin Init
+  // PA9- VUSB, PA10- ID, PA11- DM, PA12- DP
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+
+  /* Configure DM DP Pins */
+  GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* Configure VBUS Pin */
+  GPIO_InitStruct.Pin = GPIO_PIN_9;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* This for ID line debug */
+  GPIO_InitStruct.Pin = GPIO_PIN_10;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  // Init the LED
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+
+  GPIO_InitStruct.Pin = LED_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+  HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
+
+  board_led_write(false);
+
+  // TODO Button
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state)
+{
+  HAL_GPIO_WritePin(LED_PORT, LED_PIN, state);
+}
+
+uint32_t board_button_read(void)
+{
+  // TODO implement
+  return 0;
+}
+
+
+#if CFG_TUSB_OS  == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler (void)
+{
+  system_ticks++;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+#endif
+
+void HardFault_Handler (void)
+{
+  asm("bkpt");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void)
+{
+
+}

hw/bsp/stm32f407disco/stm32f4xx_hal_conf.h

@@ -0,0 +1,394 @@
+/**
+  ******************************************************************************
+  * @file    GPIO/GPIO_EXTI/Inc/stm32f4xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED         
+/* #define HAL_ADC_MODULE_ENABLED      */
+/* #define HAL_CAN_MODULE_ENABLED      */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
+/* #define HAL_CRC_MODULE_ENABLED      */ 
+/* #define HAL_CRYP_MODULE_ENABLED     */ 
+/* #define HAL_DAC_MODULE_ENABLED      */ 
+/* #define HAL_DCMI_MODULE_ENABLED     */ 
+#define HAL_DMA_MODULE_ENABLED 
+/* #define HAL_DMA2D_MODULE_ENABLED    */ 
+/* #define HAL_ETH_MODULE_ENABLED      */
+#define HAL_FLASH_MODULE_ENABLED 
+/* #define HAL_NAND_MODULE_ENABLED     */
+/* #define HAL_NOR_MODULE_ENABLED      */
+/* #define HAL_PCCARD_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED     */
+/* #define HAL_SDRAM_MODULE_ENABLED    */
+/* #define HAL_HASH_MODULE_ENABLED     */  
+#define HAL_GPIO_MODULE_ENABLED
+// #define HAL_I2C_MODULE_ENABLED
+/* #define HAL_I2S_MODULE_ENABLED      */
+/* #define HAL_IWDG_MODULE_ENABLED     */ 
+/* #define HAL_LTDC_MODULE_ENABLED     */
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED      
+/* #define HAL_RNG_MODULE_ENABLED       */   
+/* #define HAL_RTC_MODULE_ENABLED       */
+/* #define HAL_SAI_MODULE_ENABLED        */   
+/* #define HAL_SD_MODULE_ENABLED         */
+// #define HAL_SPI_MODULE_ENABLED
+/* #define HAL_TIM_MODULE_ENABLED       */
+/* #define HAL_UART_MODULE_ENABLED      */
+/* #define HAL_USART_MODULE_ENABLED     */ 
+/* #define HAL_IRDA_MODULE_ENABLED      */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED      */
+#define HAL_CORTEX_MODULE_ENABLED   
+/* #define HAL_PCD_MODULE_ENABLED      */
+/* #define HAL_HCD_MODULE_ENABLED      */
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE  (32000U)    
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */           
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+ 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+  
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */      
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

hw/bsp/stm32f407g_disc1/board_stm32f407g_disc1.c

@@ -1,132 +0,0 @@
-/* 
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#include "../board.h"
-
-#include "stm32f4xx.h"
-
-void board_init(void)
-{
-  // Init the LED on PD14
-  RCC->AHB1ENR |= RCC_AHB1ENR_GPIODEN;
-  GPIOD->MODER |= GPIO_MODER_MODE14_0;
-
-  // TODO Button
-
-  // USB Clock init
-  // PLL input- 8 MHz (External oscillator clock; HSI clock tolerance isn't
-  // tight enough- 1%, need 0.25%)
-  // VCO input- 1 to 2 MHz (2 MHz, M = 4)
-  // VCO output- 100 to 432 MHz (144 MHz, N = 72)
-  // Main PLL out- <= 180 MHz (18 MHz, P = 3- divides by 8)
-  // USB PLL out- 48 MHz (Q = 3)
-  RCC->PLLCFGR = RCC_PLLCFGR_PLLSRC_HSE | (3 << RCC_PLLCFGR_PLLQ_Pos) | \
-    (3 << RCC_PLLCFGR_PLLP_Pos) | (72 << RCC_PLLCFGR_PLLN_Pos) | \
-    (4 << RCC_PLLCFGR_PLLM_Pos);
-
-  // Wait for external clock to become ready
-  RCC->CR |= RCC_CR_HSEON;
-  while(!(RCC->CR & RCC_CR_HSERDY_Msk));
-
-  // Wait for PLL to become ready
-  RCC->CR |= RCC_CR_PLLON;
-  while(!(RCC->CR & RCC_CR_PLLRDY_Msk));
-
-  // Switch clocks!
-  RCC->CFGR |= RCC_CFGR_SW_1;
-
-  // Notify runtime of frequency change.
-  SystemCoreClockUpdate();
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-  // 1ms tick timer
-  SysTick_Config(SystemCoreClock / 1000);
-#elif CFG_TUSB_OS == OPT_OS_FREERTOS
-  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
-  //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
-#endif
-
-  RCC->AHB2ENR |= RCC_AHB2ENR_OTGFSEN;
-
-  // USB Pin Init
-  // PA9- VUSB, PA10- ID, PA11- DM, PA12- DP
-  // PC0- Power on
-  RCC->AHB1ENR |= RCC_AHB1ENR_GPIOAEN;
-  GPIOA->MODER |= GPIO_MODER_MODE9_1 | GPIO_MODER_MODE10_1 | \
-    GPIO_MODER_MODE11_1 | GPIO_MODER_MODE12_1;
-  GPIOA->AFR[1] |= (10 << GPIO_AFRH_AFSEL9_Pos) | \
-    (10 << GPIO_AFRH_AFSEL10_Pos) | (10 << GPIO_AFRH_AFSEL11_Pos) | \
-    (10 << GPIO_AFRH_AFSEL12_Pos);
-
-  // Pullup required on ID, despite the manual claiming there's an
-  // internal pullup already (page 1245, Rev 17)
-  GPIOA->PUPDR |= GPIO_PUPDR_PUPD10_0;
-}
-
-//--------------------------------------------------------------------+
-// Board porting API
-//--------------------------------------------------------------------+
-
-void board_led_write(bool state)
-{
-  if (!state) {
-    GPIOD->BSRR = GPIO_BSRR_BR14;
-  } else {
-    GPIOD->BSRR = GPIO_BSRR_BS14;
-  }
-}
-
-uint32_t board_button_read(void)
-{
-  // TODO implement
-  return 0;
-}
-
-
-#if CFG_TUSB_OS  == OPT_OS_NONE
-volatile uint32_t system_ticks = 0;
-void SysTick_Handler (void)
-{
-  system_ticks++;
-}
-
-uint32_t board_millis(void)
-{
-  return system_ticks;
-}
-#endif
-
-void HardFault_Handler (void)
-{
-  asm("bkpt");
-}
-
-// Required by __libc_init_array in startup code if we are compiling using
-// -nostdlib/-nostartfiles.
-void _init(void)
-{
-
-}

hw/bsp/stm32f411disco/STM32F411VETx_FLASH.ld

@@ -0,0 +1,169 @@
+/*
+*****************************************************************************
+**
+
+**  File        : LinkerScript.ld
+**
+**  Abstract    : Linker script for STM32F411VETx Device with
+**                512KByte FLASH, 128KByte RAM
+**
+**                Set heap size, stack size and stack location according
+**                to application requirements.
+**
+**                Set memory bank area and size if external memory is used.
+**
+**  Target      : STMicroelectronics STM32
+**
+**
+**  Distribution: The file is distributed as is, without any warranty
+**                of any kind.
+**
+**  (c)Copyright Ac6.
+**  You may use this file as-is or modify it according to the needs of your
+**  project. Distribution of this file (unmodified or modified) is not
+**  permitted. Ac6 permit registered System Workbench for MCU users the
+**  rights to distribute the assembled, compiled & linked contents of this
+**  file as part of an application binary file, provided that it is built
+**  using the System Workbench for MCU toolchain.
+**
+*****************************************************************************
+*/
+
+/* Entry Point */
+ENTRY(Reset_Handler)
+
+/* Highest address of the user mode stack */
+_estack = 0x20020000;    /* end of RAM */
+/* Generate a link error if heap and stack don't fit into RAM */
+_Min_Heap_Size = 0x200;;      /* required amount of heap  */
+_Min_Stack_Size = 0x400;; /* required amount of stack */
+
+/* Specify the memory areas */
+MEMORY
+{
+FLASH (rx)      : ORIGIN = 0x08000000, LENGTH = 512K
+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 128K
+}
+
+/* Define output sections */
+SECTIONS
+{
+  /* The startup code goes first into FLASH */
+  .isr_vector :
+  {
+    . = ALIGN(4);
+    KEEP(*(.isr_vector)) /* Startup code */
+    . = ALIGN(4);
+  } >FLASH
+
+  /* The program code and other data goes into FLASH */
+  .text :
+  {
+    . = ALIGN(4);
+    *(.text)           /* .text sections (code) */
+    *(.text*)          /* .text* sections (code) */
+    *(.glue_7)         /* glue arm to thumb code */
+    *(.glue_7t)        /* glue thumb to arm code */
+    *(.eh_frame)
+
+    KEEP (*(.init))
+    KEEP (*(.fini))
+
+    . = ALIGN(4);
+    _etext = .;        /* define a global symbols at end of code */
+  } >FLASH
+
+  /* Constant data goes into FLASH */
+  .rodata :
+  {
+    . = ALIGN(4);
+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */
+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */
+    . = ALIGN(4);
+  } >FLASH
+
+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
+  .ARM : {
+    __exidx_start = .;
+    *(.ARM.exidx*)
+    __exidx_end = .;
+  } >FLASH
+
+  .preinit_array     :
+  {
+    PROVIDE_HIDDEN (__preinit_array_start = .);
+    KEEP (*(.preinit_array*))
+    PROVIDE_HIDDEN (__preinit_array_end = .);
+  } >FLASH
+  .init_array :
+  {
+    PROVIDE_HIDDEN (__init_array_start = .);
+    KEEP (*(SORT(.init_array.*)))
+    KEEP (*(.init_array*))
+    PROVIDE_HIDDEN (__init_array_end = .);
+  } >FLASH
+  .fini_array :
+  {
+    PROVIDE_HIDDEN (__fini_array_start = .);
+    KEEP (*(SORT(.fini_array.*)))
+    KEEP (*(.fini_array*))
+    PROVIDE_HIDDEN (__fini_array_end = .);
+  } >FLASH
+
+  /* used by the startup to initialize data */
+  _sidata = LOADADDR(.data);
+
+  /* Initialized data sections goes into RAM, load LMA copy after code */
+  .data : 
+  {
+    . = ALIGN(4);
+    _sdata = .;        /* create a global symbol at data start */
+    *(.data)           /* .data sections */
+    *(.data*)          /* .data* sections */
+
+    . = ALIGN(4);
+    _edata = .;        /* define a global symbol at data end */
+  } >RAM AT> FLASH
+
+  
+  /* Uninitialized data section */
+  . = ALIGN(4);
+  .bss :
+  {
+    /* This is used by the startup in order to initialize the .bss secion */
+    _sbss = .;         /* define a global symbol at bss start */
+    __bss_start__ = _sbss;
+    *(.bss)
+    *(.bss*)
+    *(COMMON)
+
+    . = ALIGN(4);
+    _ebss = .;         /* define a global symbol at bss end */
+    __bss_end__ = _ebss;
+  } >RAM
+
+  /* User_heap_stack section, used to check that there is enough RAM left */
+  ._user_heap_stack :
+  {
+    . = ALIGN(8);
+    PROVIDE ( end = . );
+    PROVIDE ( _end = . );
+    . = . + _Min_Heap_Size;
+    . = . + _Min_Stack_Size;
+    . = ALIGN(8);
+  } >RAM
+
+  
+
+  /* Remove information from the standard libraries */
+  /DISCARD/ :
+  {
+    libc.a ( * )
+    libm.a ( * )
+    libgcc.a ( * )
+  }
+
+  .ARM.attributes 0 : { *(.ARM.attributes) }
+}
+
+

hw/bsp/stm32f411disco/board.mk

@@ -0,0 +1,47 @@
+CFLAGS += \
+  -DHSE_VALUE=8000000 \
+  -DCFG_TUSB_MCU=OPT_MCU_STM32F4 \
+  -DSTM32F411xE \
+  -mthumb \
+  -mabi=aapcs-linux \
+  -mcpu=cortex-m4 \
+  -mfloat-abi=hard \
+  -mfpu=fpv4-sp-d16 \
+  -nostdlib -nostartfiles
+
+# All source paths should be relative to the top level.
+LD_FILE = hw/bsp/stm32f411disco/STM32F411VETx_FLASH.ld
+
+SRC_C += \
+	hw/mcu/st/system-init/system_stm32f4xx.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c \
+	hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c
+
+SRC_S += \
+	hw/mcu/st/startup/stm32f4/startup_stm32f411xe.s
+
+INC += \
+	$(TOP)/hw/mcu/st/cmsis \
+	$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F4xx/Include \
+	$(TOP)/hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Inc \
+	$(TOP)/hw/bsp/stm32f411disco
+
+# For TinyUSB port source
+VENDOR = st
+CHIP_FAMILY = stm32f4
+
+# For freeRTOS port source
+FREERTOS_PORT = ARM_CM4F
+
+# For flash-jlink target
+JLINK_DEVICE = stm32f41ve
+JLINK_IF = swd
+
+# Path to STM32 Cube Programmer CLI, should be added into system path 
+STM32Prog = STM32_Programmer_CLI
+
+# flash target using on-board stlink
+flash: $(BUILD)/$(BOARD)-firmware.elf
+	$(STM32Prog) --connect port=swd --write $< --go

hw/bsp/stm32f411disco/board_stm32f411disco.c

@@ -0,0 +1,188 @@
+/* 
+ * The MIT License (MIT)
+ *
+ * Copyright (c) 2019 Ha Thach (tinyusb.org)
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ *
+ * This file is part of the TinyUSB stack.
+ */
+
+#include "../board.h"
+
+#include "stm32f4xx.h"
+#include "stm32f4xx_hal_conf.h"
+
+#define LED_PORT  GPIOD
+#define LED_PIN   GPIO_PIN_13
+
+/**
+  * @brief  System Clock Configuration
+  *         The system Clock is configured as follow :
+  *            System Clock source            = PLL (HSE)
+  *            SYSCLK(Hz)                     = 84000000
+  *            HCLK(Hz)                       = 84000000
+  *            AHB Prescaler                  = 1
+  *            APB1 Prescaler                 = 2
+  *            APB2 Prescaler                 = 1
+  *            HSE Frequency(Hz)              = 8000000
+  *            PLL_M                          = 8
+  *            PLL_N                          = 336
+  *            PLL_P                          = 4
+  *            PLL_Q                          = 7
+  *            VDD(V)                         = 3.3
+  *            Main regulator output voltage  = Scale2 mode
+  *            Flash Latency(WS)              = 2
+  * @param  None
+  * @retval None
+  */
+static void SystemClock_Config(void)
+{
+  RCC_ClkInitTypeDef RCC_ClkInitStruct;
+  RCC_OscInitTypeDef RCC_OscInitStruct;
+
+  /* Enable Power Control clock */
+  __HAL_RCC_PWR_CLK_ENABLE();
+
+  /* The voltage scaling allows optimizing the power consumption when the device is
+     clocked below the maximum system frequency, to update the voltage scaling value
+     regarding system frequency refer to product datasheet.  */
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+
+  /* Enable HSE Oscillator and activate PLL with HSE as source */
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
+  RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 8;
+  RCC_OscInitStruct.PLL.PLLN = 336;
+  RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV4;
+  RCC_OscInitStruct.PLL.PLLQ = 7;
+  HAL_RCC_OscConfig(&RCC_OscInitStruct);
+
+  /* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2
+     clocks dividers */
+  RCC_ClkInitStruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
+  RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
+  RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
+  RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV2;
+  RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
+  HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2);
+}
+
+void board_init(void)
+{
+#if CFG_TUSB_OS == OPT_OS_NONE
+  // 1ms tick timer
+  SysTick_Config(SystemCoreClock / 1000);
+#elif CFG_TUSB_OS == OPT_OS_FREERTOS
+  // If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
+  //NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
+#endif
+
+  SystemClock_Config();
+
+  // Notify runtime of frequency change.
+  SystemCoreClockUpdate();
+
+  // Enable USB OTG clock
+  __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
+
+
+  /* Configure USB FS GPIOs */
+  __HAL_RCC_GPIOA_CLK_ENABLE();
+
+  GPIO_InitTypeDef  GPIO_InitStruct;
+
+  /* Configure DM DP Pins */
+  GPIO_InitStruct.Pin = GPIO_PIN_11 | GPIO_PIN_12;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* Configure VBUS Pin */
+  GPIO_InitStruct.Pin = GPIO_PIN_9;
+  GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  /* This for ID line debug */
+  GPIO_InitStruct.Pin = GPIO_PIN_10;
+  GPIO_InitStruct.Mode = GPIO_MODE_AF_OD;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
+  GPIO_InitStruct.Alternate = GPIO_AF10_OTG_FS;
+  HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
+
+  // Init the LED
+  __HAL_RCC_GPIOD_CLK_ENABLE();
+
+  GPIO_InitStruct.Pin = LED_PIN;
+  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Speed = GPIO_SPEED_FAST;
+  HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
+
+  board_led_write(false);
+
+  // TODO Button
+}
+
+//--------------------------------------------------------------------+
+// Board porting API
+//--------------------------------------------------------------------+
+
+void board_led_write(bool state)
+{
+  HAL_GPIO_WritePin(LED_PORT, LED_PIN, state);
+}
+
+uint32_t board_button_read(void)
+{
+  // TODO implement
+  return 0;
+}
+
+
+#if CFG_TUSB_OS  == OPT_OS_NONE
+volatile uint32_t system_ticks = 0;
+void SysTick_Handler (void)
+{
+  system_ticks++;
+}
+
+uint32_t board_millis(void)
+{
+  return system_ticks;
+}
+#endif
+
+void HardFault_Handler (void)
+{
+  asm("bkpt");
+}
+
+// Required by __libc_init_array in startup code if we are compiling using
+// -nostdlib/-nostartfiles.
+void _init(void)
+{
+
+}

hw/bsp/stm32f411disco/stm32f4xx_hal_conf.h

@@ -0,0 +1,394 @@
+/**
+  ******************************************************************************
+  * @file    GPIO/GPIO_EXTI/Inc/stm32f4xx_hal_conf.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration file
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT(c) 2017 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver 
+  */
+#define HAL_MODULE_ENABLED         
+/* #define HAL_ADC_MODULE_ENABLED      */
+/* #define HAL_CAN_MODULE_ENABLED      */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED      */
+/* #define HAL_CRC_MODULE_ENABLED      */ 
+/* #define HAL_CRYP_MODULE_ENABLED     */ 
+/* #define HAL_DAC_MODULE_ENABLED      */ 
+/* #define HAL_DCMI_MODULE_ENABLED     */ 
+#define HAL_DMA_MODULE_ENABLED 
+/* #define HAL_DMA2D_MODULE_ENABLED    */ 
+/* #define HAL_ETH_MODULE_ENABLED      */
+#define HAL_FLASH_MODULE_ENABLED 
+/* #define HAL_NAND_MODULE_ENABLED     */
+/* #define HAL_NOR_MODULE_ENABLED      */
+/* #define HAL_PCCARD_MODULE_ENABLED   */
+/* #define HAL_SRAM_MODULE_ENABLED     */
+/* #define HAL_SDRAM_MODULE_ENABLED    */
+/* #define HAL_HASH_MODULE_ENABLED     */  
+#define HAL_GPIO_MODULE_ENABLED
+// #define HAL_I2C_MODULE_ENABLED
+/* #define HAL_I2S_MODULE_ENABLED      */
+/* #define HAL_IWDG_MODULE_ENABLED     */ 
+/* #define HAL_LTDC_MODULE_ENABLED     */
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED      
+/* #define HAL_RNG_MODULE_ENABLED       */   
+/* #define HAL_RTC_MODULE_ENABLED       */
+/* #define HAL_SAI_MODULE_ENABLED        */   
+/* #define HAL_SD_MODULE_ENABLED         */
+// #define HAL_SPI_MODULE_ENABLED
+/* #define HAL_TIM_MODULE_ENABLED       */
+/* #define HAL_UART_MODULE_ENABLED      */
+/* #define HAL_USART_MODULE_ENABLED     */ 
+/* #define HAL_IRDA_MODULE_ENABLED      */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED      */
+#define HAL_CORTEX_MODULE_ENABLED   
+/* #define HAL_PCD_MODULE_ENABLED      */
+/* #define HAL_HCD_MODULE_ENABLED      */
+
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).  
+  */
+#if !defined  (HSE_VALUE) 
+  #define HSE_VALUE    (8000000U) /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    (100U)   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL). 
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    (16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE) 
+ #define LSI_VALUE  (32000U)    
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.  */
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  (32768U)    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    (5000U)   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source 
+  *        frequency, this source is inserted directly through I2S_CKIN pad. 
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    (12288000U) /*!< Value of the External oscillator in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */     
+#define  VDD_VALUE                    (3300U) /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            (0x0FU) /*!< tick interrupt priority */           
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the 
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     1U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file 
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+   
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h" 
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+ 
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */ 
+  
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */      
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+   
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed. 
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/

hw/mcu/st/README.md

@@ -47,6 +47,6 @@ these files in one place.
   * ARM-provided headers are stored in the [cmsis](cmsis) directory.
   * The linker script for the STM32F4-DISCOVERY board demo is supplied as
     part of TinyUSB's
-    [Board Support Packages](../../bsp/stm32f407g_disc1/STM32F407VGTx_FLASH.ld).
+    [Board Support Packages](../../bsp/stm32f407disco/STM32F407VGTx_FLASH.ld).
   The above files were extracted from a dummy stm32cube project in February
   2019.