increase version and update changelog

README.rst

@@ -40,14 +40,14 @@ The stack supports the following MCUs:
 - **NXP:**
 
   - iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
-  - Kinetis: KL25
+  - Kinetis: KL25, K32L2Bxx
   - LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55
 
 - **Raspberry Pi:** RP2040
 - **Renesas:** RX63N, RX65N
 - **Silabs:** EFM32GG12
 - **Sony:** CXD56
-- **ST:** STM32 series: L0, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed
+- **ST:** STM32 series: L0, L1, F0, F1, F2, F3, F4, F7, H7 both FullSpeed and HighSpeed
 - **TI:** MSP430
 - **ValentyUSB:** eptri
 

docs/info/changelog.rst

@@ -2,91 +2,193 @@
 Changelog
 *********
 
-0.10.1 (03-06-221)
+0.11.0 (29-08-2021)
 ===================
 
--  rework rp2040 examples and CMake build, allow better integration with pico-sdk
+- Add host/hid_controller example: only worked/tested with Sony PS4 DualShock controller
+- Add device/hid_boot_interface example
+- Add support for Renesas CCRX toolchain for RX mcu
+
+Device Controller Driver (DCD)
+------------------------------
+
+- Add new DCD port for SAMx7x (E70, S70, V70, V71)
+- Add new mcu K32L2Bxx
+- Add new mcu GD32VF103
+- Add new mcu STM32l151
+- Add new mcu SAML21
+- Add new mcu RX65n RX72n
+- Fix NUC120/121/126 USBRAM can only be accessed in byte manner. Also improve set_address & disable sof
+- Add Suspend/Resume handling for Renesas RX family.
+- Fix DA1469x no VBUS startup
+
+Synopsys
+^^^^^^^^
+
+- Fix Synopsys set address bug which could cause re-enumeration failed
+- Fix for dcd_synopsys driver integer overflow in HS mode (issue #968)
+
+nRF5x
+^^^^^
+
+- Add nRF5x suspend, resume and remote wakeup
+- Fix nRF5x race condition with TASKS_EP0RCVOUT
+
+RP2040
+^^^^^^
+
+- Add RP2040 suspend & resume support
+- Implement double buffer for both host and device (#891). Howver device EPOUT is still single bufferred due to techinical issue with short packet 
 
 Host Controller Driver (HCD)
 ----------------------------
 
--  Fix rp2040 host driver: incorrect PID with low speed device with max packet size of 8 bytes
--  Improve hub driver
--  Remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer()
--  Use hcd_frame_number() instead of micro frame
--  Fix OHCI endpoint address and xferred_bytes in xfer complete event
+RP2040
+^^^^^^
+
+- Implement double bufferred to fix E4 errata and boost performance
+- Lots of rp2040 update and enhancment
+
+Device Stack
+------------
+
+USBD
+^^^^
+
+- Better support big endian mcu
+- Add tuh_inited() and tud_inited(), will separte tusb_init/inited() to tud/tuh init/inited
+- Add dcd_attr.h for defining common controller attribute such as max endpoints
+
+Bluetooth
+^^^^^^^^^
+
+- Fix stridx error in descriptor template
+
+DFU
+^^^
+
+- Enhance DFU implementation to support multiple alternate interface and better support bwPollTimeout
+- Rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU 
+
+HID
+^^^
+
+- Fix newline usage keyboard (ENTER 0x28)
+- Better support Hid Get/Set report
+- Change max gamepad support from 16 to 32 buttons
+
+MIDI
+^^^^
+
+- Fix midi available
+- Fix midi data
+- Fix an issue when calling midi API when not enumerated yet
+
+UAC2
+^^^^
+
+- Fix bug and enhance of UAC2
+ 
+Vendor
+^^^^^^
+
+- Fix vendor fifo deadlock in certain case
+- Add tud_vendor_n_read_flush
+
+Host Stack
+----------
+
+- Major update and rework most of host stack, still needs more improvement
+- Lots of improvement and update in parsing configuration and control
+- Rework and major update to HID driver. Will default to enable boot interface if available
+- Sepearate CFG_TUH_DEVICE_MAX and CFG_TUH_HUB for better management and reduce SRAM usage
+
+0.10.1 (03-06-2021)
+===================
 
+- rework rp2040 examples and CMake build, allow better integration with pico-sdk
+
+Host Controller Driver (HCD)
+----------------------------
+
+- Fix rp2040 host driver: incorrect PID with low speed device with max packet size of 8 bytes
+- Improve hub driver
+- Remove obsolete hcd_pipe_queue_xfer()/hcd_pipe_xfer()
+- Use hcd_frame_number() instead of micro frame
+- Fix OHCI endpoint address and xferred_bytes in xfer complete event
 
 0.10.0 (28-05-2021)
 ===================
 
--  Rework tu_fifo_t with separated mutex for read and write, better support DMA with read/write buffer info. And constant address mode
--  Improve audio_test example and add audio_4_channel_mic example
--  Add new dfu example
--  Remove pico-sdk from submodule
+- Rework tu_fifo_t with separated mutex for read and write, better support DMA with read/write buffer info. And constant address mode
+- Improve audio_test example and add audio_4_channel_mic example
+- Add new dfu example
+- Remove pico-sdk from submodule
 
 Device Controller Driver (DCD)
 ------------------------------
 
--  Add new DCD port for Silabs EFM32GG12 with board Thunderboard Kit (SLTB009A)
--  Add new DCD port Renesas RX63N, board GR-CITRUS
--  Add new (optional) endpoint API dcd_edpt_xfer_fifo
--  Fix build with nRF5340
--  Fix build with lpc15 and lpc54
--  Fix build with lpc177x_8x
--  STM32 Synopsys: greatly improve Isochronous transfer with edpt_xfer_fifo API
--  Support LPC55 port1 highspeed
--  Add support for Espressif esp32s3
--  nRF: fix race condition that could cause drop packet of Bulk OUT transfer
+- Add new DCD port for Silabs EFM32GG12 with board Thunderboard Kit (SLTB009A)
+- Add new DCD port Renesas RX63N, board GR-CITRUS
+- Add new (optional) endpoint API dcd_edpt_xfer_fifo
+- Fix build with nRF5340
+- Fix build with lpc15 and lpc54
+- Fix build with lpc177x_8x
+- STM32 Synopsys: greatly improve Isochronous transfer with edpt_xfer_fifo API
+- Support LPC55 port1 highspeed
+- Add support for Espressif esp32s3
+- nRF: fix race condition that could cause drop packet of Bulk OUT transfer
 
 USB Device Driver (USBD)
 ------------------------
 
--  Add new (optional) endpoint ADPI usbd_edpt_xfer_fifo
+- Add new (optional) endpoint ADPI usbd_edpt_xfer_fifo
 
 Device Class Driver
 -------------------
 
 CDC
 
--  [Breaking] tud_cdc_peek(), tud_vendor_peek() no longer support random offset and dropped position parameter.
+- [Breaking] tud_cdc_peek(), tud_vendor_peek() no longer support random offset and dropped position parameter.
 
 DFU
 
--  Add new DFU 1.1 class driver (WIP)
+- Add new DFU 1.1 class driver (WIP)
 
 HID
 
--  Fix keyboard report descriptor template
--  Add more hid keys constant from 0x6B to 0xA4
--  [Breaking] rename API
-   -  HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE
-   -  tud_hid_boot_mode() to tud_hid_get_protocol()
-   -  tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb()
+- Fix keyboard report descriptor template
+- Add more hid keys constant from 0x6B to 0xA4
+
+- [Breaking] rename API
+  - HID_PROTOCOL_NONE/KEYBOARD/MOUST to HID_ITF_PROTOCOL_NONE/KEYBOARD/MOUSE
+  - tud_hid_boot_mode() to tud_hid_get_protocol()
+  - tud_hid_boot_mode_cb() to tud_hid_set_protocol_cb()
 
 MIDI
 
--  Fix MIDI buffer overflow issue
--  [Breaking] rename API
-   -  Rename tud_midi_read() to tud_midi_stream_read()
-   -  Rename tud_midi_write() to tud_midi_stream_write()
-   -  Rename tud_midi_receive() to tud_midi_packet_read()
-   -  Rename tud_midi_send() to tud_midi_packet_write()
+- Fix MIDI buffer overflow issue
+
+- [Breaking] rename API
+  - Rename tud_midi_read() to tud_midi_stream_read()
+  - Rename tud_midi_write() to tud_midi_stream_write()
+  - Rename tud_midi_receive() to tud_midi_packet_read()
+  - Rename tud_midi_send() to tud_midi_packet_write()
 
 Host Controller Driver (HCD)
 ----------------------------
 
--  No noticable changes
+- No noticable changes
 
 USB Host Driver (USBH)
 ----------------------
 
--  No noticable changes
+- No noticable changes
 
 Host Class Driver
 -----------------
 
--  HID: Rework host hid driver, basically everything changes
+- HID: Rework host hid driver, basically everything changes
 
 
 0.9.0 (12-03-2021)
@@ -100,59 +202,62 @@ Device Controller Driver (DCD)
 
 RP2040
 
--  Fix endpoint buffer reallocation overrun problem
--  Fix osal_pico queue overflow in initialization
--  Fix Isochronous endpoint buffer size in transfer
--  Optimize hardware endpoint struct to reduce RAM usage
--  Fix enum walkaround forever check for SE0 when pull up is disabled
+- Fix endpoint buffer reallocation overrun problem
+- Fix osal_pico queue overflow in initialization
+- Fix Isochronous endpoint buffer size in transfer
+- Optimize hardware endpoint struct to reduce RAM usage
+- Fix enum walkaround forever check for SE0 when pull up is disabled
 
 Sony CXD56
 
--  Pass the correct speed on Spresense
--  Fix setup processed flag
+- Pass the correct speed on Spresense
+- Fix setup processed flag
 
 NXP Transdimention
 
--  Update dcd_init() to reset controller to device mode
+- Update dcd_init() to reset controller to device mode
 
 USB Device Driver (USBD)
 ^^^^^^^^^^^^^^^^^^^^^^^^
 
--  Fix issue with status zlp (tud_control_status) is returned by class driver with SET/CLEAR_FEATURE for endpoint.
--  Correct endpoint size check for fullspeed bulk, can be 8, 16, 32, 64
--  Ack SET_INTERFACE even if it is not implemented by class driver.
+- Fix issue with status zlp (tud_control_status) is returned by class driver with SET/CLEAR_FEATURE for endpoint.
+- Correct endpoint size check for fullspeed bulk, can be 8, 16, 32, 64
+- Ack SET_INTERFACE even if it is not implemented by class driver.
 
 Device Class Driver
 ^^^^^^^^^^^^^^^^^^^
 
 DFU Runtime
 
--  rename dfu_rt to dfu_runtime for easy reading
+- rename dfu_rt to dfu_runtime for easy reading
 
 CDC
 
--  Add tud_cdc_send_break_cb() to support break request
--  Improve CDC receive, minor behavior changes: when tud_cdc_rx_wanted_cb() is invoked wanted_char may not be the last byte in the fifo
+- Add tud_cdc_send_break_cb() to support break request
+- Improve CDC receive, minor behavior changes: when tud_cdc_rx_wanted_cb() is invoked wanted_char may not be the last byte in the fifo
 
 HID
 
--  [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes
-   -  tud_hid_descriptor_report_cb()
-   -  tud_hid_get_report_cb()
-   -  tud_hid_set_report_cb()
-   -  tud_hid_boot_mode_cb()
-   -  tud_hid_set_idle_cb()
--  Add report complete callback tud_hid_report_complete_cb() API
--  Add DPad/Hat support for HID Gamepad
-   -  `TUD_HID_REPORT_DESC_GAMEPAD()` now support 16 buttons, 2 joysticks, 1 hat/dpad
-   -  Add hid_gamepad_report_t along with `GAMEPAD_BUTTON_` and `GAMEPAD_HAT_` enum
-   -  Add Gamepad to hid_composite / hid_composite_freertos example
+- [Breaking] Add itf argument to hid API to support multiple instances, follow API has signature changes
+
+  - tud_hid_descriptor_report_cb()
+  - tud_hid_get_report_cb()
+  - tud_hid_set_report_cb()
+  - tud_hid_boot_mode_cb()
+  - tud_hid_set_idle_cb()
+
+- Add report complete callback tud_hid_report_complete_cb() API
+- Add DPad/Hat support for HID Gamepad
+
+  - `TUD_HID_REPORT_DESC_GAMEPAD()` now support 16 buttons, 2 joysticks, 1 hat/dpad
+  - Add hid_gamepad_report_t along with `GAMEPAD_BUTTON_` and `GAMEPAD_HAT_` enum
+  - Add Gamepad to hid_composite / hid_composite_freertos example
 
 MIDI
 
--  Fix dropping MIDI sysex message when fifo is full
--  Fix typo in tud_midi_write24(), make example less ambigous for cable and channel
--  Fix incorrect endpoint descriptor length, MIDI v1 use Audio v1 which has 9-byte endpoint descriptor (instead of 7)
+- Fix dropping MIDI sysex message when fifo is full
+- Fix typo in tud_midi_write24(), make example less ambigous for cable and channel
+- Fix incorrect endpoint descriptor length, MIDI v1 use Audio v1 which has 9-byte endpoint descriptor (instead of 7)
 
 Host Stack
 ----------
@@ -160,45 +265,48 @@ Host Stack
 Host Controller Driver (HCD)
 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^
 
--  Add rhport to hcd_init()
--  Improve EHCI/OHCI driver abstraction
-   -  Move echi/ohci files to portable/
-   -  Rename hcd_lpc18_43 to hcd_transdimension
-   -  Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr()
--  Update NXP transdimention hcd_init() to reset controller to host mode
-   -  Ported hcd to rt10xx
+- Add rhport to hcd_init()
+- Improve EHCI/OHCI driver abstraction
+
+  - Move echi/ohci files to portable/
+  - Rename hcd_lpc18_43 to hcd_transdimension
+  - Sub hcd API with hcd_ehci_init(), hcd_ehci_register_addr()
+  
+- Update NXP transdimention hcd_init() to reset controller to host mode
+
+  - Ported hcd to rt10xx
 
 USB Host Driver (USBH)
 ^^^^^^^^^^^^^^^^^^^^^^
 
--  No noticeable changes to usbh
+- No noticeable changes to usbh
 
 Host Class Driver
 ^^^^^^^^^^^^^^^^^
 
 MSC
 
--  Rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry()
--  Rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming
--  Change tuh_msc_is_busy() to tuh_msc_ready()
--  Add read10 and write10 function: tuh_msc_read10(), tuh_msc_write10()
--  Read_Capacity is invoked as part of enumeration process
--  Add tuh_msc_get_block_count(), tuh_msc_get_block_size()
--  Add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities
+- Rename tuh_msc_scsi_inquiry() to tuh_msc_inquiry()
+- Rename tuh_msc_mounted_cb/tuh_msc_unmounted_cb to tuh_msc_mount_cb/tuh_msc_unmount_cb to match device stack naming
+- Change tuh_msc_is_busy() to tuh_msc_ready()
+- Add read10 and write10 function: tuh_msc_read10(), tuh_msc_write10()
+- Read_Capacity is invoked as part of enumeration process
+- Add tuh_msc_get_block_count(), tuh_msc_get_block_size()
+- Add CFG_TUH_MSC_MAXLUN (default to 4) to hold lun capacities
 
 Others
 ------
 
--  Add basic support for rt-thread OS
--  Change zero bitfield length to more explicit padding
--  Build example now fetch required submodules on the fly while running `make` without prio submodule init for mcu drivers
--  Update pico-sdk to v1.1.0
+- Add basic support for rt-thread OS
+- Change zero bitfield length to more explicit padding
+- Build example now fetch required submodules on the fly while running `make` without prio submodule init for mcu drivers
+- Update pico-sdk to v1.1.0
 
 **New Boards**
 
--  Microchip SAM E54 Xplained Pro
--  LPCXpresso 55s28
--  LPCXpresso 18s37
+- Microchip SAM E54 Xplained Pro
+- LPCXpresso 55s28
+- LPCXpresso 18s37
 
 
 0.8.0 (05-02-2021)
@@ -207,47 +315,55 @@ Others
 Device Controller Driver
 ------------------------
 
--  Added new device support for Raspberry Pi RP2040
--  Added new device support for NXP Kinetis KL25ZXX
--  Use dcd_event_bus_reset() with link speed to replace bus_signal
--  ESP32-S2:
-   -  Add bus suspend and wakeup support
--  SAMD21:
-   -  Fix (walkaround) samd21 setup_packet overflow by USB DMA
--  STM32 Synopsys:
-   -  Rework USB FIFO allocation scheme and allow RX FIFO size reduction
--  Sony CXD56
-   -  Update Update Spresense SDK to 2.0.2
-   -  Fix dcd issues with setup packets
-   -  Correct EP number for cdc_msc example
+- Added new device support for Raspberry Pi RP2040
+- Added new device support for NXP Kinetis KL25ZXX
+- Use dcd_event_bus_reset() with link speed to replace bus_signal
+
+- ESP32-S2:
+  - Add bus suspend and wakeup support
+  
+- SAMD21:
+  - Fix (walkaround) samd21 setup_packet overflow by USB DMA
+  
+- STM32 Synopsys:
+  - Rework USB FIFO allocation scheme and allow RX FIFO size reduction
+  
+- Sony CXD56
+  - Update Update Spresense SDK to 2.0.2
+  - Fix dcd issues with setup packets
+  - Correct EP number for cdc_msc example
 
 USB Device
 ----------
 
 **USBD**
 
--  Rework usbd control transfer to have additional stage parameter for setup, data, status
--  Fix tusb_init() return true instead of TUSB_ERROR_NONE
--  Added new API tud_connected() that return true after device got out of bus reset and received the very first setup packet
+- Rework usbd control transfer to have additional stage parameter for setup, data, status
+- Fix tusb_init() return true instead of TUSB_ERROR_NONE
+- Added new API tud_connected() that return true after device got out of bus reset and received the very first setup packet
 
 **Class Driver**
 
--  CDC
-   -  Allow to transmit data, even if the host does not support control line states i.e set DTR
--  HID
-   -  change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64
--  MIDI
-   -  Fix midi sysex sending bug
--  MSC
-   -  Invoke only scsi complete callback after status transaction is complete.
-   -  Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error.
--  USBTMC
-   -  Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu
+- CDC
+  - Allow to transmit data, even if the host does not support control line states i.e set DTR
+  
+- HID
+  - change default CFG_TUD_HID_EP_BUFSIZE from 16 to 64
+  
+- MIDI
+  - Fix midi sysex sending bug
+  
+- MSC
+  - Invoke only scsi complete callback after status transaction is complete.
+  - Fix scsi_mode_sense6_t padding, which cause IAR compiler internal error.
+  
+- USBTMC
+  - Change interrupt endpoint example size to 8 instead of 2 for better compatibility with mcu
 
 **Example**
 
--  Support make from windows cmd.exe
--  Add HID Consumer Control (media keys) to hid_composite & hid_composite_freertos examples
+- Support make from windows cmd.exe
+- Add HID Consumer Control (media keys) to hid_composite & hid_composite_freertos examples
 
 
 USB Host
@@ -258,18 +374,18 @@ No noticeable changes to host stack
 New Boards
 ----------
 
--  NXP/Freescale Freedom FRDM-KL25Z
--  Feather Double M33 express
--  Raspberry Pi Pico
--  Adafruit Feather RP2040
--  Adafruit Itsy Bitsy RP2040
--  Adafruit QT RP2040
--  Adfruit Feather ESP32-S2
--  Adafruit Magtag 29" Eink
--  Adafruit Metro ESP32-S2
--  Adafruit PyBadge
--  Adafruit PyPortal
--  Great Scott Gadgets' LUNA D11 & D21
+- NXP/Freescale Freedom FRDM-KL25Z
+- Feather Double M33 express
+- Raspberry Pi Pico
+- Adafruit Feather RP2040
+- Adafruit Itsy Bitsy RP2040
+- Adafruit QT RP2040
+- Adfruit Feather ESP32-S2
+- Adafruit Magtag 29" Eink
+- Adafruit Metro ESP32-S2
+- Adafruit PyBadge
+- Adafruit PyPortal
+- Great Scott Gadgets' LUNA D11 & D21
 
 
 0.7.0 (08-11-2020)
@@ -278,32 +394,38 @@ New Boards
 Device Controller Driver
 ------------------------
 
--  Added new support for Espressif ESP32-S2
--  Added new support for Dialog DA1469x
--  Enhance STM32 Synopsys
--  Support bus events disconnection/suspend/resume/wakeup
-   -  Improve transfer performance with optimizing xfer and fifo size
-   -  Support Highspeed port (OTG_HS) with both internal and external PHY
-   -  Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY)
-   -  Add ISO transfer, fix odd/even frame
-   -  Fix FIFO flush during stall
-   -  Implement dcd_edpt_close() API
-   -  Support F105, F107
--  Enhance STM32 fsdev
-   -  Improve dcd fifo allocation
-   -  Fix ISTR race condition
-   -  Support remap USB IRQ on supported MCUs
-   -  Implement dcd_edpt_close() API
--  Enhance NUC 505: enhance set configure behavior
--  Enhance SAMD
-   -  Fix race condition with setup packet
-   -  Add SAMD11 option `OPT_MCU_SAMD11`
-   -  Add SAME5x option `OPT_MCU_SAME5X`
--  Fix SAMG control data toggle and stall race condition
--  Enhance nRF
-   -  Fix hanged when tud_task() is called within critical section (disabled interrupt)
-   -  Fix disconnect bus event not submitted
-   -  Implement ISO transfer and dcd_edpt_close()
+- Added new support for Espressif ESP32-S2
+- Added new support for Dialog DA1469x
+- Enhance STM32 Synopsys
+
+- Support bus events disconnection/suspend/resume/wakeup
+  - Improve transfer performance with optimizing xfer and fifo size
+  - Support Highspeed port (OTG_HS) with both internal and external PHY
+  - Support multiple usb ports with rhport=1 is highspeed on selected MCUs e.g H743, F23. It is possible to have OTG_HS to run on Fullspeed PHY (e.g lacking external PHY)
+  - Add ISO transfer, fix odd/even frame
+  - Fix FIFO flush during stall
+  - Implement dcd_edpt_close() API
+  - Support F105, F107
+  
+- Enhance STM32 fsdev
+  - Improve dcd fifo allocation
+  - Fix ISTR race condition
+  - Support remap USB IRQ on supported MCUs
+  - Implement dcd_edpt_close() API
+  
+- Enhance NUC 505: enhance set configure behavior
+
+- Enhance SAMD
+  - Fix race condition with setup packet
+  - Add SAMD11 option `OPT_MCU_SAMD11`
+  - Add SAME5x option `OPT_MCU_SAME5X`
+  
+- Fix SAMG control data toggle and stall race condition
+
+- Enhance nRF
+  - Fix hanged when tud_task() is called within critical section (disabled interrupt)
+  - Fix disconnect bus event not submitted
+  - Implement ISO transfer and dcd_edpt_close()
 
 
 USB Device
@@ -311,79 +433,89 @@ USB Device
 
 **USBD**
 
--  Add new class driver for **Bluetooth HCI** class driver with example can be found in [mynewt-tinyusb-example](https://github.com/hathach/mynewt-tinyusb-example) since it needs mynewt OS to run with.
--  Fix USBD endpoint usage racing condition with `usbd_edpt_claim()/usbd_edpt_release()`
--  Added `tud_task_event_ready()` and `osal_queue_empty()`. This API is needed to check before enter low power mode with WFI/WFE
--  Rename USB IRQ Handler to `dcd_int_handler()`. Application must define IRQ handler in which it calls this API.
--  Add `dcd_connect()` and `dcd_disconnect()` to enable/disable internal pullup on D+/D-  on supported MCUs.
--  Add `usbd_edpt_open()`
--  Remove `dcd_set_config()`
--  Add *OPT_OS_CUMSTOM* as hook for application to overwrite and/or add their own OS implementation
--  Support SET_INTERFACE, GET_INTERFACE request
--  Add Logging for debug with optional uart/rtt/swo printf retarget or `CFG_TUSB_DEBUG_PRINTF` hook
--  Add IAR compiler support
--  Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument
--  Improve USB Highspeed support with actual link speed detection with `dcd_event_bus_reset()`
--  Enhance class driver management
-   -  `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver
-   -  Add application implemented class driver via `usbd_app_driver_get_cb()`
-   -  IAD is handled to assign driver id
--  Added `tud_descriptor_device_qualifier_cb()` callback
--  Optimize `tu_fifo` bulk write/read transfer
--  Forward non-std control request to class driver
--  Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string)
--  Fix OSAL FreeRTOS yield from ISR
+- Add new class driver for **Bluetooth HCI** class driver with example can be found in [mynewt-tinyusb-example](https://github.com/hathach/mynewt-tinyusb-example) since it needs mynewt OS to run with.
+- Fix USBD endpoint usage racing condition with `usbd_edpt_claim()/usbd_edpt_release()`
+- Added `tud_task_event_ready()` and `osal_queue_empty()`. This API is needed to check before enter low power mode with WFI/WFE
+- Rename USB IRQ Handler to `dcd_int_handler()`. Application must define IRQ handler in which it calls this API.
+- Add `dcd_connect()` and `dcd_disconnect()` to enable/disable internal pullup on D+/D- on supported MCUs.
+- Add `usbd_edpt_open()`
+- Remove `dcd_set_config()`
+- Add *OPT_OS_CUMSTOM* as hook for application to overwrite and/or add their own OS implementation
+- Support SET_INTERFACE, GET_INTERFACE request
+- Add Logging for debug with optional uart/rtt/swo printf retarget or `CFG_TUSB_DEBUG_PRINTF` hook
+- Add IAR compiler support
+- Support multiple configuration descriptors. `TUD_CONFIG_DESCRIPTOR()` template has extra config_num as 1st argument
+- Improve USB Highspeed support with actual link speed detection with `dcd_event_bus_reset()`
+
+- Enhance class driver management
+  - `usbd_driver_open()` add max length argument, and return length of interface (0 for not supported). Return value is used for finding appropriate driver
+  - Add application implemented class driver via `usbd_app_driver_get_cb()`
+  - IAD is handled to assign driver id
+  
+- Added `tud_descriptor_device_qualifier_cb()` callback
+- Optimize `tu_fifo` bulk write/read transfer
+- Forward non-std control request to class driver
+- Let application handle Microsoft OS 1.0 Descriptors (the 0xEE index string)
+- Fix OSAL FreeRTOS yield from ISR
 
 **Class Drivers**
 
--  USBNET: remove ACM-EEM due to lack of support from host
--  USBTMC: fix descriptors when INT EP is disabled
--  CDC:
-   -  Send zero length packet for end of data when needed
-   -  Add `tud_cdc_tx_complete_cb()` callback
-   -  Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo
--  MIDI:
-   -  Add packet interface
-   -  Add multiple jack descriptors
-   -  Fix MIDI driver for sysex
--  DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request
--  Rename some configure macro to make it clear that those are used directly for endpoint transfer
-   -  CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
-   -  CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE
-   -  CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
-   -  CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE
--  HID:
-   -  Fix gamepad template descriptor
-   -  Add multiple HID interface API
-   -  Add extra comma to HID_REPORT_ID
+- USBNET: remove ACM-EEM due to lack of support from host
+- USBTMC: fix descriptors when INT EP is disabled
+
+- CDC:
+  - Send zero length packet for end of data when needed
+  - Add `tud_cdc_tx_complete_cb()` callback
+  - Change tud_cdc_n_write_flush() return number of bytes forced to transfer, and flush when writing enough data to fifo
+  
+- MIDI:
+  - Add packet interface
+  - Add multiple jack descriptors
+  - Fix MIDI driver for sysex
+  
+- DFU Runtime: fix response to SET_INTERFACE and DFU_GETSTATUS request
+
+- Rename some configure macro to make it clear that those are used directly for endpoint transfer
+  - CFG_TUD_HID_BUFSIZE to CFG_TUD_HID_EP_BUFSIZE
+  - CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE
+  - CFG_TUD_MSC_BUFSIZE to CFG_TUD_MSC_EP_BUFSIZE
+  - CFG_TUD_MIDI_EPSIZE to CFG_TUD_MIDI_EP_BUFSIZE
+  
+- HID:
+  - Fix gamepad template descriptor
+  - Add multiple HID interface API
+  - Add extra comma to HID_REPORT_ID
 
 USB Host
 --------
 
--  Rework USB host stack (still work in progress)
-   -  Fix compile error with pipehandle
-   -  Rework usbh control and enumeration as non-blocking
--  Improve Hub, MSC, HID host driver
+- Rework USB host stack (still work in progress)
+   - Fix compile error with pipehandle
+   - Rework usbh control and enumeration as non-blocking
+   
+- Improve Hub, MSC, HID host driver
 
 Examples
 --------
 
--  Add new hid_composite_freertos
--  Add new dynamic_configuration to demonstrate how to switch configuration descriptors
--  Add new hid_multiple_interface
--  Enhance `net_lwip_webserver` example
-   -  Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both)
-   -  Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver
--  Added new Audio example: audio_test uac2_headsest
+- Add new hid_composite_freertos
+- Add new dynamic_configuration to demonstrate how to switch configuration descriptors
+- Add new hid_multiple_interface
+
+- Enhance `net_lwip_webserver` example
+  - Add multiple configuration: RNDIS for Windows, CDC-ECM for macOS (Linux will work with both)
+  - Update lwip to STABLE-2_1_2_RELEASE for net_lwip_webserver
+  
+- Added new Audio example: audio_test uac2_headsest
 
 New Boards
 ----------
 
--  Espressif ESP32-S2: saola_1, kaluga_1
--  STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo
--  Dialog DA1469x dk pro and dk usb
--  Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro
--  nRF: ItsyBitsy nRF52840
+- Espressif ESP32-S2: saola_1, kaluga_1
+- STM32: F746 Nucleo, H743 Eval, H743 Nucleo, F723 discovery, stlink v3 mini, STM32L4r5 Nucleo
+- Dialog DA1469x dk pro and dk usb
+- Microchip: Great Scoot Gadgets' LUNA, samd11_xplained, D5035-01, atsamd21 xplained pro
+- nRF: ItsyBitsy nRF52840
 
 
 0.6.0 (30-03-2020)
@@ -396,111 +528,56 @@ Added
 
 **MCU**
 
--  Added support for Microchip SAMG55
--  Added support for Nordic nRF52833
--  Added support for Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505
--  Added support for NXP LPC: 51Uxx, 54xxx, 55xx
--  Added support for NXP iMXRT: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
--  Added support for Sony CXD56 (Spresense)
--  Added support for STM32: L0, F0, F1, F2, F3, F4, F7, H7
--  Added support for TI MSP430
--  Added support for ValentyUSB's eptri
+- Added support for Microchip SAMG55
+- Added support for Nordic nRF52833
+- Added support for Nuvoton: NUC120, NUC121/NUC125, NUC126, NUC505
+- Added support for NXP LPC: 51Uxx, 54xxx, 55xx
+- Added support for NXP iMXRT: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
+- Added support for Sony CXD56 (Spresense)
+- Added support for STM32: L0, F0, F1, F2, F3, F4, F7, H7
+- Added support for TI MSP430
+- Added support for ValentyUSB's eptri
 
 **Class Driver**
 
--  Added DFU Runtime class driver
--  Added Network class driver with RNDIS, CDC-ECM, CDC-EEM (work in progress)
--  Added USBTMC class driver
--  Added WebUSB class driver using vendor-specific class
--  Added multiple instances support for CDC and MIDI
--  Added a handful of unit test with Ceedling.
--  Added LOG support for debugging with CFG_TUSB_DEBUG
--  Added `tud_descriptor_bos_cb()` for BOS descriptor (required for USB 2.1)
--  Added `dcd_edpt0_status_complete()` as optional API for DCD
+- Added DFU Runtime class driver
+- Added Network class driver with RNDIS, CDC-ECM, CDC-EEM (work in progress)
+- Added USBTMC class driver
+- Added WebUSB class driver using vendor-specific class
+- Added multiple instances support for CDC and MIDI
+- Added a handful of unit test with Ceedling.
+- Added LOG support for debugging with CFG_TUSB_DEBUG
+- Added `tud_descriptor_bos_cb()` for BOS descriptor (required for USB 2.1)
+- Added `dcd_edpt0_status_complete()` as optional API for DCD
 
 **Examples**
 
 Following examples are added:
 
--  board_test
--  cdc_dual_ports
--  dfu_rt
--  hid_composite
--  net_lwip_webserver
--  usbtmc
--  webusb_serial
-
-**Boards**
-
-Following boards are added:
-
--  adafruit_clue
--  arduino_nano33_ble
--  circuitplayground_bluefruit
--  circuitplayground_express
--  feather_m0_express
--  feather_nrf52840_sense
--  feather_stm32f405
--  fomu
--  itsybitsy_m0
--  itsybitsy_m4
--  lpcxpresso11u37
--  lpcxpresso1549
--  lpcxpresso51u68
--  lpcxpresso54114
--  lpcxpresso55s69
--  mbed1768
--  mimxrt1010_evk
--  mimxrt1015_evk
--  mimxrt1020_evk
--  mimxrt1050_evkb
--  mimxrt1060_evk
--  mimxrt1064_evk
--  msp_exp430f5529lp
--  ngx4330
--  nrf52840_mdk_dongle
--  nutiny_nuc121s
--  nutiny_nuc125s
--  nutiny_nuc126v
--  nutiny_sdk_nuc120
--  nutiny_sdk_nuc505
--  pca10059
--  pca10100
--  pyboardv11
--  raytac_mdbt50q_rx
--  samg55xplained
--  seeeduino_xiao
--  spresense
--  stm32f070rbnucleo
--  stm32f072disco
--  stm32f103bluepill
--  stm32f207nucleo
--  stm32f401blackpill
--  stm32f411blackpill
--  stm32f411disco
--  stm32f412disco
--  stm32f767nucleo
--  stm32h743nucleo
--  stm32l0538disco
--  stm32l476disco
--  teensy_40
+- board_test
+- cdc_dual_ports
+- dfu_rt
+- hid_composite
+- net_lwip_webserver
+- usbtmc
+- webusb_serial
 
 Changed
 -------
 
--  Changed `tud_descriptor_string_cb()` to have additional Language ID argument
--  Merged hal_nrf5x.c into dcd_nrf5x.c
--  Merged dcd_samd21.c and dcd_samd51.c into dcd_samd.c
--  Generalized dcd_stm32f4.c to dcd_synopsys.c
--  Changed cdc_msc_hid to cdc_msc (drop hid) due to limited endpoints number of some MCUs
--  Improved DCD SAMD stability, fix missing setup packet occasionally
--  Improved usbd/usbd_control with proper hanlding of zero-length packet (ZLP)
--  Improved STM32 DCD FSDev
--  Improved STM32 DCD Synopsys
--  Migrated CI from Travis to Github Action
--  Updated nrfx submodule to 2.1.0
--  Fixed mynewt osal queue definition
--  Fixed cdc_msc_freertos example build for all MCUs
+- Changed `tud_descriptor_string_cb()` to have additional Language ID argument
+- Merged hal_nrf5x.c into dcd_nrf5x.c
+- Merged dcd_samd21.c and dcd_samd51.c into dcd_samd.c
+- Generalized dcd_stm32f4.c to dcd_synopsys.c
+- Changed cdc_msc_hid to cdc_msc (drop hid) due to limited endpoints number of some MCUs
+- Improved DCD SAMD stability, fix missing setup packet occasionally
+- Improved usbd/usbd_control with proper hanlding of zero-length packet (ZLP)
+- Improved STM32 DCD FSDev
+- Improved STM32 DCD Synopsys
+- Migrated CI from Travis to Github Action
+- Updated nrfx submodule to 2.1.0
+- Fixed mynewt osal queue definition
+- Fixed cdc_msc_freertos example build for all MCUs
 
 
 0.5.0 (06-2019)
@@ -508,6 +585,6 @@ Changed
 
 First release, device stack works great, host stack works but still need improvement.
 
--  Special thanks to @adafruit team, especially @tannewt to help out immensely to rework device stack: simplify osal & control transfer, adding SAMD21/SAMD51 ports, writing porting docs, adding MIDI class support etc...
--  Thanks to @cr1901 for adding STM32F4 port.
--  Thanks to @PTS93 and @todbot for HID raw API
+- Special thanks to @adafruit team, especially @tannewt to help out immensely to rework device stack: simplify osal & control transfer, adding SAMD21/SAMD51 ports, writing porting docs, adding MIDI class support etc...
+- Thanks to @cr1901 for adding STM32F4 port.
+- Thanks to @PTS93 and @todbot for HID raw API

repository.yml

@@ -6,7 +6,10 @@ repo.versions:
     "0.7.0": "0.7.0"
     "0.8.0": "0.8.0"
     "0.9.0": "0.9.0"
+    "0.10.0": "0.10.0"
+    "0.10.1": "0.10.1"
+    "0.11.0": "0.11.0"
 
     "0-dev": "0.0.0"        # master
-    "0-latest": "0.9.0"     # latest stable release
+    "0-latest": "0.11.0"     # latest stable release
 

src/tusb_option.h

@@ -28,8 +28,8 @@
 #define _TUSB_OPTION_H_
 
 #define TUSB_VERSION_MAJOR     0
-#define TUSB_VERSION_MINOR     10
-#define TUSB_VERSION_REVISION  1
+#define TUSB_VERSION_MINOR     11
+#define TUSB_VERSION_REVISION  0
 #define TUSB_VERSION_STRING    TU_STRING(TUSB_VERSION_MAJOR) "." TU_STRING(TUSB_VERSION_MINOR) "." TU_STRING(TUSB_VERSION_REVISION)
 
 //--------------------------------------------------------------------+