internal symbol rename

src/common/tusb_mcu_attr.h

@@ -27,14 +27,13 @@
 #ifndef TUSB_MCU_ATTR_H_
 #define TUSB_MCU_ATTR_H_
 
-#include "tusb_option.h"
-
-// Attribute includes
-// - ENDPOINT_MAX: max (logical) number of endpoint
-// - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed,
-//                              e.g EP1 OUT & EP1 IN cannot exist together
-// - RHPORT_HIGHSPEED: mask to indicate which port support highspeed mode (without external PHY)
-//                     bit0 for port0 and so on.
+/* Attribute includes
+ * - ENDPOINT_MAX: max (logical) number of endpoint
+ * - ENDPOINT_EXCLUSIVE_NUMBER: endpoint number with different direction IN and OUT aren't allowed,
+ *                              e.g EP1 OUT & EP1 IN cannot exist together
+ * - RHPORT_HIGHSPEED: mask to indicate which port support highspeed mode (without external PHY)
+ *                     bit0 for port0 and so on.
+ */
 
 //------------- NXP -------------//
 #if   TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX)
@@ -42,6 +41,7 @@
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX)
   #define DCD_ATTR_ENDPOINT_MAX   16
+  #define HCD_ATTR_OHCI
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   // TODO USB0 has 6, USB1 has 4
@@ -49,6 +49,8 @@
   #define DCD_ATTR_ENDPOINT_MAX     6
   #define DCD_ATTR_RHPORT_HIGHSPEED 0x01 // Port0 HS, Port1 FS
 
+  #define HCD_ATTR_EHCI
+
 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX)
    #define DCD_ATTR_ENDPOINT_MAX   5
 
@@ -65,6 +67,8 @@
   #define DCD_ATTR_ENDPOINT_MAX     8
   #define DCD_ATTR_RHPORT_HIGHSPEED 0x03 // Port0 HS, Port1 HS
 
+  #define HCD_ATTR_EHCI
+
 #elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2BXX)
   #define DCD_ATTR_ENDPOINT_MAX   16
 
@@ -221,7 +225,13 @@
 #elif TU_CHECK_MCU(OPT_MCU_F1C100S)
   #define DCD_ATTR_ENDPOINT_MAX   4
 
-#else
+#endif
+
+//--------------------------------------------------------------------+
+// Default Values
+//--------------------------------------------------------------------+
+
+#ifndef DCD_ATTR_ENDPOINT_MAX
   #warning "DCD_ATTR_ENDPOINT_MAX is not defined for this MCU, default to 8"
   #define DCD_ATTR_ENDPOINT_MAX   8
 #endif

src/host/hcd.h

@@ -30,7 +30,6 @@
 #include "common/tusb_common.h"
 #include "osal/osal.h"
 #include "common/tusb_fifo.h"
-#include "hcd_attr.h"
 
 #ifdef __cplusplus
  extern "C" {

src/host/hcd_attr.h

@@ -1,105 +0,0 @@
-/*
- * The MIT License (MIT)
- *
- * Copyright (c) 2021, Ha Thach (tinyusb.org)
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * This file is part of the TinyUSB stack.
- */
-
-#ifndef TUSB_HCD_ATTR_H_
-#define TUSB_HCD_ATTR_H_
-
-#include "tusb_option.h"
-
-// Attribute includes
-// - ENDPOINT_MAX: max (logical) number of endpoint
-// - PORT_HIGHSPEED: mask to indicate which port support highspeed mode, bit0 for port0 and so on.
-
-//------------- NXP -------------//
-#if TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX)
-  #define HCD_ATTR_OHCI
-
-#elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
-  #define HCD_ATTR_EHCI_TRANSDIMENSION
-
-#elif TU_CHECK_MCU(OPT_MCU_LPC54XXX)
-  // #define HCD_ATTR_EHCI_NXP_PTD
-
-#elif TU_CHECK_MCU(OPT_MCU_LPC55XX)
-  // #define HCD_ATTR_EHCI_NXP_PTD
-
-#elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX)
-  #define HCD_ATTR_EHCI_TRANSDIMENSION
-
-#elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX)
-
-//------------- Microchip -------------//
-#elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAMD51, OPT_MCU_SAME5X) || \
-      TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML21, OPT_MCU_SAML22)
-
-#elif TU_CHECK_MCU(OPT_MCU_SAMG)
-
-#elif TU_CHECK_MCU(OPT_MCU_SAMX7X)
-
-//------------- ST -------------//
-#elif TU_CHECK_MCU(OPT_MCU_STM32F0, OPT_MCU_STM32F1, OPT_MCU_STM32F3) || \
-      TU_CHECK_MCU(OPT_MCU_STM32L0, OPT_MCU_STM32L1, OPT_MCU_STM32L4)
-
-#elif TU_CHECK_MCU(OPT_MCU_STM32F2, OPT_MCU_STM32F3, OPT_MCU_STM32F4)
-
-#elif TU_CHECK_MCU(OPT_MCU_STM32F7)
-
-#elif TU_CHECK_MCU(OPT_MCU_STM32H7)
-
-//------------- Sony -------------//
-#elif TU_CHECK_MCU(OPT_MCU_CXD56)
-
-//------------- Nuvoton -------------//
-#elif TU_CHECK_MCU(OPT_MCU_NUC505)
-
-//------------- Espressif -------------//
-#elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
-
-//------------- Raspberry Pi -------------//
-#elif TU_CHECK_MCU(OPT_MCU_RP2040)
-
-//------------- Silabs -------------//
-#elif TU_CHECK_MCU(OPT_MCU_EFM32GG)
-
-//------------- Renesas -------------//
-#elif TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N)
-
-//#elif TU_CHECK_MCU(OPT_MCU_MM32F327X)
-//  #define DCD_ATTR_ENDPOINT_MAX not known yet
-
-//------------- GigaDevice -------------//
-#elif TU_CHECK_MCU(OPT_MCU_GD32VF103)
-
-#else
-//  #warning "DCD_ATTR_ENDPOINT_MAX is not defined for this MCU, default to 8"
-#endif
-
-// Default to fullspeed if not defined
-//#ifndef PORT_HIGHSPEED
-//  #define DCD_ATTR_PORT_HIGHSPEED 0x00
-//#endif
-
-#endif

src/portable/ehci/ehci.c

@@ -24,9 +24,9 @@
  * This file is part of the TinyUSB stack.
  */
 
-#include "host/hcd_attr.h"
+#include "tusb_option.h"
 
-#if CFG_TUH_ENABLED && defined(HCD_ATTR_EHCI_TRANSDIMENSION)
+#if CFG_TUH_ENABLED && defined(HCD_ATTR_EHCI)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -45,7 +45,7 @@
 #define EHCI_DBG     2
 
 // Framelist size as small as possible to save SRAM
-#ifdef HCD_ATTR_EHCI_TRANSDIMENSION
+#ifdef HCD_ATTR_EHCI
   // NXP Transdimension: 8 elements
   #define FRAMELIST_SIZE_BIT_VALUE      7u
   #define FRAMELIST_SIZE_USBCMD_VALUE   (((FRAMELIST_SIZE_BIT_VALUE &  3) << EHCI_USBCMD_POS_FRAMELIST_SIZE) | \

src/portable/ohci/ohci.c

@@ -24,7 +24,7 @@
  * This file is part of the TinyUSB stack.
  */
 
-#include "host/hcd_attr.h"
+#include "tusb_option.h"
 
 #if CFG_TUH_ENABLED && defined(HCD_ATTR_OHCI)