get lpc17xx running through enumeration (with control data < 64)

demos/bsp/boards/board.h

@@ -36,12 +36,6 @@
 */
 /**************************************************************************/
 
-/** \file
- *  \brief TBD
- *
- *  \note TBD
- */
-
 /**
  *  \defgroup Group_Board Boards
  *  \brief TBD

demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.c

@@ -50,6 +50,11 @@ void board_init(void)
   // Leds Init
   GPIO_SetDir(CFG_LED_PORT, BIT_(CFG_LED_PIN), 1);
 
+
+  // lpcxpresso base board USB device : if base board J14 is inserted at 1-2, 1k5 resistor is controlled by P0_21 (active low)
+  GPIO_SetDir(0, BIT_(21), 1);
+  GPIO_ClearValue(0, BIT_(21));
+
 #if CFG_UART_ENABLE
   //------------- UART init -------------//
 
@@ -70,7 +75,6 @@ void board_init(void)
 	UART_CFG_Type UARTConfigStruct;
   UART_ConfigStructInit(&UARTConfigStruct);
 	UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
-	UARTConfigStruct.Clock_Speed = 0;
 
 	UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
 	UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit

demos/bsp/boards/lpcxpresso/board_lpcxpresso1769.h

@@ -47,6 +47,9 @@
 #define _TUSB_BOARD_LPCXPRESSO1769_H_
 
 #include "LPC17xx.h"
+
+#include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_clkpwr.h"
+#include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_pinsel.h"
 #include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_gpio.h"
 #include "lpc175x_6x/LPC17xx_DriverLib/include/lpc17xx_uart.h"
 
@@ -57,7 +60,7 @@
 #define CFG_LED_PORT                  (0)
 #define CFG_LED_PIN                   (22)
 
-#define CFG_PRINTF_TARGET             PRINTF_TARGET_SEMIHOST
+#define CFG_PRINTF_TARGET             PRINTF_TARGET_UART
 
 #ifdef __cplusplus
  }

demos/device/device_os_none/.cproject

@@ -30,7 +30,7 @@
 							<builder buildPath="${workspace_loc:/device_keyboard/Debug}" enableAutoBuild="false" enabledIncrementalBuild="true" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.1029932398" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
 							<tool id="com.crt.advproject.cpp.exe.debug.1119457813" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.2040685134" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
-								<option id="com.crt.advproject.gcc.arch.658802474" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gcc.arch.658802474" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gcc.thumb.697143257" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.c.compiler.option.preprocessor.def.symbols.371325215" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="__REDLIB__"/>
@@ -54,7 +54,7 @@
 								<inputType id="com.crt.advproject.compiler.input.932601394" superClass="com.crt.advproject.compiler.input"/>
 							</tool>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.1050918013" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
-								<option id="com.crt.advproject.gas.arch.1370417737" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gas.arch.1370417737" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gas.thumb.631765837" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.both.asm.option.flags.crt.1931019746" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
 								<inputType id="com.crt.advproject.assembler.input.1898367800" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
@@ -62,7 +62,7 @@
 							</tool>
 							<tool id="com.crt.advproject.link.cpp.exe.debug.290831412" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.1506176667" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
-								<option id="com.crt.advproject.link.arch.1411471839" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.arch.1411471839" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.thumb.897273840" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
 								<option id="com.crt.advproject.link.script.935550147" name="Linker script" superClass="com.crt.advproject.link.script" value="&quot;device_os_none_Board_LPCXpresso1347.ld&quot;" valueType="string"/>
 								<option id="com.crt.advproject.link.manage.1693118885" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
@@ -119,7 +119,7 @@
 							<builder buildPath="${workspace_loc:/device_keyboard/Debug}" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.1603637140" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
 							<tool id="com.crt.advproject.cpp.exe.debug.1912680765" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.901878888" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
-								<option id="com.crt.advproject.gcc.arch.227583493" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gcc.arch.227583493" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gcc.thumb.1429919562" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.c.compiler.option.preprocessor.def.symbols.690334585" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="__REDLIB__"/>
@@ -143,7 +143,7 @@
 								<inputType id="com.crt.advproject.compiler.input.1660235734" superClass="com.crt.advproject.compiler.input"/>
 							</tool>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.1919954827" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
-								<option id="com.crt.advproject.gas.arch.62277376" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gas.arch.62277376" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gas.thumb.567012827" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.both.asm.option.flags.crt.1544048579" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
 								<inputType id="com.crt.advproject.assembler.input.2112542401" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
@@ -151,7 +151,7 @@
 							</tool>
 							<tool id="com.crt.advproject.link.cpp.exe.debug.438186138" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.332994381" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
-								<option id="com.crt.advproject.link.arch.5439507" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.arch.5439507" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.thumb.1052282054" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
 								<option id="com.crt.advproject.link.script.1723865493" name="Linker script" superClass="com.crt.advproject.link.script" value="&quot;device_os_none_Board_rf1ghznode.ld&quot;" valueType="string"/>
 								<option id="com.crt.advproject.link.manage.314167409" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
@@ -208,7 +208,7 @@
 							<builder buildPath="${workspace_loc:/device_keyboard/Debug}" enableAutoBuild="false" enabledIncrementalBuild="true" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.491161730" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
 							<tool id="com.crt.advproject.cpp.exe.debug.1586184655" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.1058924021" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
-								<option id="com.crt.advproject.gcc.arch.1901283003" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gcc.arch.1901283003" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gcc.thumb.1993301691" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.c.compiler.option.preprocessor.def.symbols.211439980" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="__REDLIB__"/>
@@ -234,7 +234,7 @@
 								<inputType id="com.crt.advproject.compiler.input.864372614" superClass="com.crt.advproject.compiler.input"/>
 							</tool>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.73154126" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
-								<option id="com.crt.advproject.gas.arch.767404687" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gas.arch.767404687" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gas.thumb.1342467320" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.both.asm.option.flags.crt.357381448" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
 								<option id="com.crt.advproject.gas.fpu.1588814622" name="Floating point" superClass="com.crt.advproject.gas.fpu" value="com.crt.advproject.gas.fpu.fpv4" valueType="enumerated"/>
@@ -243,7 +243,7 @@
 							</tool>
 							<tool id="com.crt.advproject.link.cpp.exe.debug.1716426006" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.2143352384" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
-								<option id="com.crt.advproject.link.arch.449102543" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.arch.449102543" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.thumb.1645494591" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
 								<option id="com.crt.advproject.link.script.1301365456" name="Linker script" superClass="com.crt.advproject.link.script" value="&quot;device_os_none_Board_EA4357.ld&quot;" valueType="string"/>
 								<option id="com.crt.advproject.link.manage.679369872" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
@@ -302,7 +302,7 @@
 							<builder buildPath="${workspace_loc:/device_keyboard/Debug}" enableAutoBuild="false" enabledIncrementalBuild="true" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.716919423" incrementalBuildTarget="all" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
 							<tool id="com.crt.advproject.cpp.exe.debug.818122291" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.519176124" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
-								<option id="com.crt.advproject.gcc.arch.1604470626" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gcc.arch.1604470626" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gcc.thumb.530159727" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.c.compiler.option.preprocessor.def.symbols.216849614" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
 									<listOptionValue builtIn="false" value="__REDLIB__"/>
@@ -326,7 +326,7 @@
 								<inputType id="com.crt.advproject.compiler.input.289588331" superClass="com.crt.advproject.compiler.input"/>
 							</tool>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.1445080885" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
-								<option id="com.crt.advproject.gas.arch.573681571" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.gas.arch.573681571" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.gas.thumb.1344894564" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
 								<option id="gnu.both.asm.option.flags.crt.1806326273" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
 								<inputType id="com.crt.advproject.assembler.input.76983017" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
@@ -334,7 +334,7 @@
 							</tool>
 							<tool id="com.crt.advproject.link.cpp.exe.debug.1329585347" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
 							<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.1053597758" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
-								<option id="com.crt.advproject.link.arch.1241988591" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm4" valueType="enumerated"/>
+								<option id="com.crt.advproject.link.arch.1241988591" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
 								<option id="com.crt.advproject.link.thumb.659100667" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
 								<option id="com.crt.advproject.link.script.849880058" name="Linker script" superClass="com.crt.advproject.link.script" value="&quot;device_os_none_Board_LPCXpresso1769.ld&quot;" valueType="string"/>
 								<option id="com.crt.advproject.link.manage.1592623502" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
@@ -354,7 +354,7 @@
 						</toolChain>
 					</folderInfo>
 					<sourceEntries>
-						<entry excluding="bsp/boards/embedded_artists/ea4357|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_pwm.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_libcfg_default.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_timer.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_clkpwr.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2s.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_exti.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_iap.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rit.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_spi.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2c.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_gpdma.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_qei.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_ssp.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_emac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_mcpwm.c|bsp/boards/embedded_artists/oem_base_board|bsp/lpc11uxx|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rtc.c|bsp/lpc13uxx|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_wdt.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_adc.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/debug_frmwrk.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_dac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_can.c|bsp/lpc43xx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
+						<entry excluding="bsp/boards/embedded_artists/ea4357|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_pwm.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_libcfg_default.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_timer.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2s.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_exti.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_iap.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rit.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_spi.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_i2c.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_gpdma.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_qei.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_ssp.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_emac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_mcpwm.c|bsp/boards/embedded_artists/oem_base_board|bsp/lpc11uxx|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_rtc.c|bsp/lpc13uxx|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_wdt.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_adc.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/debug_frmwrk.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_dac.c|bsp/lpc175x_6x/LPC17xx_DriverLib/source/lpc17xx_can.c|bsp/lpc43xx" flags="VALUE_WORKSPACE_PATH|RESOLVED" kind="sourcePath" name=""/>
 					</sourceEntries>
 				</configuration>
 			</storageModule>
@@ -371,82 +371,73 @@
 	<storageModule moduleId="com.crt.config">
 		<projectStorage>&lt;?xml version="1.0" encoding="UTF-8"?&gt;&#13;
 &lt;TargetConfig&gt;&#13;
-&lt;Properties property_0="" property_2="LPC18x7_43x7_2x512_BootA.cfx" property_3="NXP" property_4="LPC4357" property_count="5" version="1"/&gt;&#13;
-&lt;infoList vendor="NXP"&gt;&lt;info chip="LPC4357" flash_driver="LPC18x7_43x7_2x512_BootA.cfx" match_id="0x0" name="LPC4357" stub="crt_emu_lpc18_43_nxp"&gt;&lt;chip&gt;&lt;name&gt;LPC4357&lt;/name&gt;&#13;
-&lt;family&gt;LPC43xx&lt;/family&gt;&#13;
+&lt;Properties property_0="" property_3="NXP" property_4="LPC1769" property_count="5" version="1"/&gt;&#13;
+&lt;infoList vendor="NXP"&gt;&lt;info chip="LPC1769" match_id="0x26113F37" name="LPC1769" package="lpc17_lqfp100.xml"&gt;&lt;chip&gt;&lt;name&gt;LPC1769&lt;/name&gt;&#13;
+&lt;family&gt;LPC17xx&lt;/family&gt;&#13;
 &lt;vendor&gt;NXP (formerly Philips)&lt;/vendor&gt;&#13;
 &lt;reset board="None" core="Real" sys="Real"/&gt;&#13;
 &lt;clock changeable="TRUE" freq="20MHz" is_accurate="TRUE"/&gt;&#13;
 &lt;memory can_program="true" id="Flash" is_ro="true" type="Flash"/&gt;&#13;
 &lt;memory id="RAM" type="RAM"/&gt;&#13;
 &lt;memory id="Periph" is_volatile="true" type="Peripheral"/&gt;&#13;
-&lt;memoryInstance derived_from="Flash" id="MFlashA512" location="0x1a000000" size="0x80000"/&gt;&#13;
-&lt;memoryInstance derived_from="Flash" id="MFlashB512" location="0x1b000000" size="0x80000"/&gt;&#13;
+&lt;memoryInstance derived_from="Flash" id="MFlash512" location="0x0" size="0x80000"/&gt;&#13;
 &lt;memoryInstance derived_from="RAM" id="RamLoc32" location="0x10000000" size="0x8000"/&gt;&#13;
-&lt;memoryInstance derived_from="RAM" id="RamLoc40" location="0x10080000" size="0xa000"/&gt;&#13;
-&lt;memoryInstance derived_from="RAM" id="RamAHB32" location="0x20000000" size="0x8000"/&gt;&#13;
-&lt;memoryInstance derived_from="RAM" id="RamAHB16" location="0x20008000" size="0x4000"/&gt;&#13;
-&lt;memoryInstance derived_from="RAM" id="RamAHB_ETB16" location="0x2000c000" size="0x4000"/&gt;&#13;
-&lt;prog_flash blocksz="0x2000" location="0x1a000000" maxprgbuff="0x400" progwithcode="TRUE" size="0x10000"/&gt;&#13;
-&lt;prog_flash blocksz="0x10000" location="0x1a010000" maxprgbuff="0x400" progwithcode="TRUE" size="0x70000"/&gt;&#13;
-&lt;prog_flash blocksz="0x2000" location="0x1b000000" maxprgbuff="0x400" progwithcode="TRUE" size="0x10000"/&gt;&#13;
-&lt;prog_flash blocksz="0x10000" location="0x1b010000" maxprgbuff="0x400" progwithcode="TRUE" size="0x70000"/&gt;&#13;
-&lt;peripheralInstance derived_from="V7M_MPU" id="MPU" location="0xe000ed90"/&gt;&#13;
-&lt;peripheralInstance derived_from="V7M_NVIC" id="NVIC" location="0xe000e000"/&gt;&#13;
-&lt;peripheralInstance derived_from="V7M_DCR" id="DCR" location="0xe000edf0"/&gt;&#13;
-&lt;peripheralInstance derived_from="V7M_ITM" id="ITM" location="0xe0000000"/&gt;&#13;
-&lt;peripheralInstance derived_from="SCT" id="SCT" location="0x40000000"/&gt;&#13;
-&lt;peripheralInstance derived_from="GPDMA" id="GPDMA" location="0x40002000"/&gt;&#13;
-&lt;peripheralInstance derived_from="SDMMC" id="SDMMC" location="0x40004000"/&gt;&#13;
-&lt;peripheralInstance derived_from="EMC" id="EMC" location="0x40005000"/&gt;&#13;
-&lt;peripheralInstance derived_from="USB0" id="USB0" location="0x40006000"/&gt;&#13;
-&lt;peripheralInstance derived_from="USB1" id="USB1" location="0x40007000"/&gt;&#13;
-&lt;peripheralInstance derived_from="LCD" id="LCD" location="0x40008000"/&gt;&#13;
-&lt;peripheralInstance derived_from="ETHERNET" id="ETHERNET" location="0x40010000"/&gt;&#13;
-&lt;peripheralInstance derived_from="ATIMER" id="ATIMER" location="0x40040000"/&gt;&#13;
-&lt;peripheralInstance derived_from="REGFILE" id="REGFILE" location="0x40041000"/&gt;&#13;
-&lt;peripheralInstance derived_from="PMC" id="PMC" location="0x40042000"/&gt;&#13;
-&lt;peripheralInstance derived_from="CREG" id="CREG" location="0x40043000"/&gt;&#13;
-&lt;peripheralInstance derived_from="EVENTROUTER" id="EVENTROUTER" location="0x40044000"/&gt;&#13;
-&lt;peripheralInstance derived_from="RTC" id="RTC" location="0x40046000"/&gt;&#13;
-&lt;peripheralInstance derived_from="CGU" id="CGU" location="0x40050000"/&gt;&#13;
-&lt;peripheralInstance derived_from="CCU1" id="CCU1" location="0x40051000"/&gt;&#13;
-&lt;peripheralInstance derived_from="CCU2" id="CCU2" location="0x40052000"/&gt;&#13;
-&lt;peripheralInstance derived_from="RGU" id="RGU" location="0x40053000"/&gt;&#13;
-&lt;peripheralInstance derived_from="WWDT" id="WWDT" location="0x40080000"/&gt;&#13;
-&lt;peripheralInstance derived_from="USART0" id="USART0" location="0x40081000"/&gt;&#13;
-&lt;peripheralInstance derived_from="USART2" id="USART2" location="0x400c1000"/&gt;&#13;
-&lt;peripheralInstance derived_from="USART3" id="USART3" location="0x400c2000"/&gt;&#13;
-&lt;peripheralInstance derived_from="UART1" id="UART1" location="0x40082000"/&gt;&#13;
-&lt;peripheralInstance derived_from="SSP0" id="SSP0" location="0x40083000"/&gt;&#13;
-&lt;peripheralInstance derived_from="SSP1" id="SSP1" location="0x400c5000"/&gt;&#13;
-&lt;peripheralInstance derived_from="TIMER0" id="TIMER0" location="0x40084000"/&gt;&#13;
-&lt;peripheralInstance derived_from="TIMER1" id="TIMER1" location="0x40085000"/&gt;&#13;
-&lt;peripheralInstance derived_from="TIMER2" id="TIMER2" location="0x400c3000"/&gt;&#13;
-&lt;peripheralInstance derived_from="TIMER3" id="TIMER3" location="0x400c4000"/&gt;&#13;
-&lt;peripheralInstance derived_from="SCU" id="SCU" location="0x40086000"/&gt;&#13;
-&lt;peripheralInstance derived_from="GPIO-PIN-INT" id="GPIO-PIN-INT" location="0x40087000"/&gt;&#13;
-&lt;peripheralInstance derived_from="GPIO-GROUP-INT0" id="GPIO-GROUP-INT0" location="0x40088000"/&gt;&#13;
-&lt;peripheralInstance derived_from="GPIO-GROUP-INT1" id="GPIO-GROUP-INT1" location="0x40089000"/&gt;&#13;
-&lt;peripheralInstance derived_from="MCPWM" id="MCPWM" location="0x400a0000"/&gt;&#13;
-&lt;peripheralInstance derived_from="I2C0" id="I2C0" location="0x400a1000"/&gt;&#13;
-&lt;peripheralInstance derived_from="I2C1" id="I2C1" location="0x400e0000"/&gt;&#13;
-&lt;peripheralInstance derived_from="I2S0" id="I2S0" location="0x400a2000"/&gt;&#13;
-&lt;peripheralInstance derived_from="I2S1" id="I2S1" location="0x400a3000"/&gt;&#13;
-&lt;peripheralInstance derived_from="C-CAN1" id="C-CAN1" location="0x400a4000"/&gt;&#13;
-&lt;peripheralInstance derived_from="RITIMER" id="RITIMER" location="0x400c0000"/&gt;&#13;
-&lt;peripheralInstance derived_from="QEI" id="QEI" location="0x400c6000"/&gt;&#13;
-&lt;peripheralInstance derived_from="GIMA" id="GIMA" location="0x400c7000"/&gt;&#13;
-&lt;peripheralInstance derived_from="DAC" id="DAC" location="0x400e1000"/&gt;&#13;
-&lt;peripheralInstance derived_from="C-CAN0" id="C-CAN0" location="0x400e2000"/&gt;&#13;
-&lt;peripheralInstance derived_from="ADC0" id="ADC0" location="0x400e3000"/&gt;&#13;
-&lt;peripheralInstance derived_from="ADC1" id="ADC1" location="0x400e4000"/&gt;&#13;
-&lt;peripheralInstance derived_from="GPIO-PORT" id="GPIO-PORT" location="0x400f4000"/&gt;&#13;
+&lt;memoryInstance derived_from="RAM" id="RamAHB32" location="0x2007c000" size="0x8000"/&gt;&#13;
+&lt;prog_flash blocksz="0x1000" location="0" maxprgbuff="0x1000" progwithcode="TRUE" size="0x10000"/&gt;&#13;
+&lt;prog_flash blocksz="0x8000" location="0x10000" maxprgbuff="0x1000" progwithcode="TRUE" size="0x70000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_NVIC" id="NVIC" location="0xE000E000"/&gt;&#13;
+&lt;peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM0&amp;amp;0x1" id="TIMER0" location="0x40004000"/&gt;&#13;
+&lt;peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM1&amp;amp;0x1" id="TIMER1" location="0x40008000"/&gt;&#13;
+&lt;peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM2&amp;amp;0x1" id="TIMER2" location="0x40090000"/&gt;&#13;
+&lt;peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM3&amp;amp;0x1" id="TIMER3" location="0x40094000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_RIT" enable="SYSCTL.PCONP.PCRIT&amp;amp;0x1" id="RIT" location="0x400B0000"/&gt;&#13;
+&lt;peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;amp;0x1" id="GPIO0" location="0x2009C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;amp;0x1" id="GPIO1" location="0x2009C020"/&gt;&#13;
+&lt;peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;amp;0x1" id="GPIO2" location="0x2009C040"/&gt;&#13;
+&lt;peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;amp;0x1" id="GPIO3" location="0x2009C060"/&gt;&#13;
+&lt;peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;amp;0x1" id="GPIO4" location="0x2009C080"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_I2S" enable="SYSCTL.PCONP&amp;amp;0x08000000" id="I2S" location="0x400A8000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_SYSCTL" id="SYSCTL" location="0x400FC000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_DAC" enable="PCB.PINSEL1.P0_26&amp;amp;0x2=2" id="DAC" location="0x4008C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17xx_UART" enable="SYSCTL.PCONP.PCUART0&amp;amp;0x1" id="UART0" location="0x4000C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17xx_UART_MODEM" enable="SYSCTL.PCONP.PCUART1&amp;amp;0x1" id="UART1" location="0x40010000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17xx_UART" enable="SYSCTL.PCONP.PCUART2&amp;amp;0x1" id="UART2" location="0x40098000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17xx_UART" enable="SYSCTL.PCONP.PCUART3&amp;amp;0x1" id="UART3" location="0x4009C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="SPI" enable="SYSCTL.PCONP.PCSPI&amp;amp;0x1" id="SPI" location="0x40020000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_SSP" enable="SYSCTL.PCONP.PCSSP0&amp;amp;0x1" id="SSP0" location="0x40088000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_SSP" enable="SYSCTL.PCONP.PCSSP1&amp;amp;0x1" id="SSP1" location="0x40030000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_ADC" enable="SYSCTL.PCONP.PCAD&amp;amp;0x1" id="ADC" location="0x40034000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_USBINTST" enable="USBCLKCTL.USBClkCtrl&amp;amp;0x12" id="USBINTSTAT" location="0x400fc1c0"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_USB_CLK_CTL" id="USBCLKCTL" location="0x5000cff4"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_USBDEV" enable="USBCLKCTL.USBClkSt&amp;amp;0x12=0x12" id="USBDEV" location="0x5000C200"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_PWM" enable="SYSCTL.PCONP.PWM1&amp;amp;0x1" id="PWM" location="0x40018000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_I2C" enable="SYSCTL.PCONP.PCI2C0&amp;amp;0x1" id="I2C0" location="0x4001C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_I2C" enable="SYSCTL.PCONP.PCI2C1&amp;amp;0x1" id="I2C1" location="0x4005C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_I2C" enable="SYSCTL.PCONP.PCI2C2&amp;amp;0x1" id="I2C2" location="0x400A0000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_DMA" enable="SYSCTL.PCONP.PCGPDMA&amp;amp;0x1" id="DMA" location="0x50004000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_ENET" enable="SYSCTL.PCONP.PCENET&amp;amp;0x1" id="ENET" location="0x50000000"/&gt;&#13;
+&lt;peripheralInstance derived_from="CM3_DCR" id="DCR" location="0xE000EDF0"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_PCB" id="PCB" location="0x4002c000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_QEI" enable="SYSCTL.PCONP.PCQEI&amp;amp;0x1" id="QEI" location="0x400bc000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_USBHOST" enable="USBCLKCTL.USBClkSt&amp;amp;0x11=0x11" id="USBHOST" location="0x5000C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_USBOTG" enable="USBCLKCTL.USBClkSt&amp;amp;0x1c=0x1c" id="USBOTG" location="0x5000C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_RTC" enable="SYSCTL.PCONP.PCRTC&amp;amp;0x1" id="RTC" location="0x40024000"/&gt;&#13;
+&lt;peripheralInstance derived_from="MPU" id="MPU" location="0xE000ED90"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC1x_WDT" id="WDT" location="0x40000000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_FLASHCFG" id="FLASHACCEL" location="0x400FC000"/&gt;&#13;
+&lt;peripheralInstance derived_from="GPIO_INT" id="GPIOINTMAP" location="0x40028080"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_CANAFR" enable="SYSCTL.PCONP.PCCAN1&amp;amp;0x1|SYSCTL.PCONP.PCCAN2&amp;amp;0x1" id="CANAFR" location="0x4003C000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_CANCEN" enable="SYSCTL.PCONP.PCCAN1&amp;amp;0x1|SYSCTL.PCONP.PCCAN2&amp;amp;0x1" id="CANCEN" location="0x40040000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_CANWAKESLEEP" id="CANWAKESLEEP" location="0x400FC110"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_CANCON" enable="SYSCTL.PCONP.PCCAN1&amp;amp;0x1" id="CANCON1" location="0x40044000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_CANCON" enable="SYSCTL.PCONP.PCCAN2&amp;amp;0x1" id="CANCON2" location="0x40048000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_MCPWM" enable="SYSCTL.PCONP.PCMCPWM&amp;amp;0x1" id="MCPWM" location="0x400B8000"/&gt;&#13;
+&lt;peripheralInstance derived_from="LPC17_FMC" id="FMC" location="0x40084000"/&gt;&#13;
 &lt;/chip&gt;&#13;
-&lt;processor&gt;&lt;name gcc_name="cortex-m4"&gt;Cortex-M4&lt;/name&gt;&#13;
+&lt;processor&gt;&lt;name gcc_name="cortex-m3"&gt;Cortex-M3&lt;/name&gt;&#13;
 &lt;family&gt;Cortex-M&lt;/family&gt;&#13;
 &lt;/processor&gt;&#13;
-&lt;link href="nxp_lpc43xx_peripheral.xme" show="embed" type="simple"/&gt;&#13;
+&lt;link href="nxp_lpcxxxx_peripheral.xme" show="embed" type="simple"/&gt;&#13;
 &lt;/info&gt;&#13;
 &lt;/infoList&gt;&#13;
 &lt;/TargetConfig&gt;</projectStorage>

demos/device/device_os_none/tusb_config.h

@@ -82,7 +82,7 @@
 
 //------------- CLASS -------------//
 #define TUSB_CFG_DEVICE_HID_KEYBOARD  0
-#define TUSB_CFG_DEVICE_HID_MOUSE     1
+#define TUSB_CFG_DEVICE_HID_MOUSE     0
 #define TUSB_CFG_DEVICE_HID_GENERIC   0
 #define TUSB_CFG_DEVICE_MSC           0
 #define TUSB_CFG_DEVICE_CDC           1

tinyusb/device/dcd.h

@@ -84,10 +84,6 @@ void dcd_controller_set_configuration(uint8_t coreid);
 tusb_error_t dcd_pipe_control_xfer(uint8_t coreid, tusb_direction_t dir, void * p_buffer, uint16_t length);
 void dcd_pipe_control_stall(uint8_t coreid);
 
-//tusb_error_t dcd_pipe_control_write(uint8_t coreid, void const * buffer, uint16_t length);
-//tusb_error_t dcd_pipe_control_read(uint8_t coreid, void * buffer, uint16_t length);
-//void dcd_pipe_control_write_zero_length(uint8_t coreid);
-
 endpoint_handle_t dcd_pipe_open(uint8_t coreid, tusb_descriptor_endpoint_t const * p_endpoint_desc, uint8_t class_code) ATTR_WARN_UNUSED_RESULT;
 tusb_error_t dcd_pipe_queue_xfer(endpoint_handle_t edpt_hdl, void * buffer, uint16_t total_bytes) ATTR_WARN_UNUSED_RESULT; // only queue, not transferring yet
 tusb_error_t dcd_pipe_xfer(endpoint_handle_t edpt_hdl, void * buffer, uint16_t total_bytes, bool int_on_complete)  ATTR_WARN_UNUSED_RESULT;

tinyusb/device/dcd_lpc175x_6x.c

@@ -52,12 +52,14 @@
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+
-STATIC_ dcd_dma_descriptor_t* dcd_udca[32] ATTR_ALIGNED(128) TUSB_CFG_ATTR_USBRAM;
+STATIC_ ATTR_ALIGNED(128) dcd_dma_descriptor_t* dcd_udca[32] TUSB_CFG_ATTR_USBRAM;
 STATIC_ dcd_dma_descriptor_t  dcd_dd[DCD_MAX_DD];
 
 //--------------------------------------------------------------------+
 // INTERNAL OBJECT & FUNCTION DECLARATION
 //--------------------------------------------------------------------+
+static void bus_reset(void);
+
 static inline void endpoint_set_max_packet_size(uint8_t endpoint_idx, uint16_t max_packet_size) ATTR_ALWAYS_INLINE;
 static inline void endpoint_set_max_packet_size(uint8_t endpoint_idx, uint16_t max_packet_size)
 {
@@ -75,8 +77,8 @@ static inline void endpoint_set_max_packet_size(uint8_t endpoint_idx, uint16_t m
 
 }
 
-static inline void sie_commamd_code (uint8_t phase, uint8_t code_data) ATTR_ALWAYS_INLINE;
-static inline void sie_commamd_code (uint8_t phase, uint8_t code_data)
+static inline void sie_cmd_code (sie_cmdphase_t phase, uint8_t code_data) ATTR_ALWAYS_INLINE;
+static inline void sie_cmd_code (sie_cmdphase_t phase, uint8_t code_data)
 {
   LPC_USB->USBDevIntClr = (DEV_INT_COMMAND_CODE_EMPTY_MASK | DEV_INT_COMMAND_DATA_FULL_MASK);
   LPC_USB->USBCmdCode   = (phase << 8) | (code_data << 16);
@@ -88,26 +90,29 @@ static inline void sie_commamd_code (uint8_t phase, uint8_t code_data)
   LPC_USB->USBDevIntClr = wait_flag;
 }
 
-static inline void sie_command_write (uint8_t cmd_code, uint8_t data_len, uint8_t data) ATTR_ALWAYS_INLINE;
-static inline void sie_command_write (uint8_t cmd_code, uint8_t data_len, uint8_t data)
+static inline void sie_write (uint8_t cmd_code, uint8_t data_len, uint8_t data) ATTR_ALWAYS_INLINE;
+static inline void sie_write (uint8_t cmd_code, uint8_t data_len, uint8_t data)
 {
-  sie_commamd_code(SIE_CMDPHASE_COMMAND, cmd_code);
+  sie_cmd_code(SIE_CMDPHASE_COMMAND, cmd_code);
 
   if (data_len)
   {
-    sie_commamd_code(SIE_CMDPHASE_WRITE, data);
+    sie_cmd_code(SIE_CMDPHASE_WRITE, data);
   }
 }
 
-static inline uint32_t sie_command_read (uint8_t cmd_code, uint8_t data_len) ATTR_ALWAYS_INLINE;
-static inline uint32_t sie_command_read (uint8_t cmd_code, uint8_t data_len)
+static inline uint32_t sie_read (uint8_t cmd_code, uint8_t data_len) ATTR_ALWAYS_INLINE;
+static inline uint32_t sie_read (uint8_t cmd_code, uint8_t data_len)
 {
   // TODO multiple read
-  sie_commamd_code(SIE_CMDPHASE_COMMAND , cmd_code);
-  sie_commamd_code(SIE_CMDPHASE_READ    , cmd_code);
+  sie_cmd_code(SIE_CMDPHASE_COMMAND , cmd_code);
+  sie_cmd_code(SIE_CMDPHASE_READ    , cmd_code);
   return LPC_USB->USBCmdData;
 }
 
+static tusb_error_t pipe_control_write(void const * buffer, uint16_t length);
+static tusb_error_t pipe_control_read(void * buffer, uint16_t length);
+
 //--------------------------------------------------------------------+
 // IMPLEMENTATION
 //--------------------------------------------------------------------+
@@ -119,20 +124,23 @@ void endpoint_control_isr(uint8_t coreid)
   //------------- control OUT -------------//
   if (endpoint_int_status & BIT_(0))
   {
-    uint32_t const endpoint_status = sie_command_read(SIE_CMDCODE_ENDPOINT_SELECT+0, 1);
+    uint32_t const endpoint_status = sie_read(SIE_CMDCODE_ENDPOINT_SELECT+0, 1);
     if (endpoint_status & SIE_ENDPOINT_STATUS_SETUP_RECEIVED_MASK)
     {
-      (void) sie_command_read(SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT+0, 1); // clear setup bit
+      tusb_control_request_t control_request;
+
+      (void) sie_read(SIE_CMDCODE_ENDPOINT_SELECT_CLEAR_INTERRUPT+0, 1); // clear setup bit, can be omitted ???
+
+      pipe_control_read(&control_request, 8);
 
-      dcd_pipe_control_read(0, &usbd_devices[0].setup_packet, 8);
-      usbd_isr(0, TUSB_EVENT_SETUP_RECEIVED);
+      usbd_setup_received_isr(0, &control_request);
     }else
     {
       // Current not support any out control with data yet
-//      dcd_pipe_control_read(0,..
+//      pipe_control_read(0,..
     }
-    sie_command_write(SIE_CMDCODE_ENDPOINT_SELECT+0, 0, 0);
-    sie_command_write(SIE_CMDCODE_BUFFER_CLEAR     , 0, 0);
+    sie_write(SIE_CMDCODE_ENDPOINT_SELECT+0, 0, 0);
+    sie_write(SIE_CMDCODE_BUFFER_CLEAR     , 0, 0);
   }
 
   //------------- control IN -------------//
@@ -152,10 +160,11 @@ void dcd_isr(uint8_t coreid)
   //------------- usb bus event -------------//
   if (device_int_status & DEV_INT_DEVICE_STATUS_MASK)
   {
-    uint32_t const dev_status_reg = sie_command_read(SIE_CMDCODE_DEVICE_STATUS, 1);
+    uint32_t const dev_status_reg = sie_read(SIE_CMDCODE_DEVICE_STATUS, 1);
     if (dev_status_reg & SIE_DEV_STATUS_RESET_MASK)
     {
-      usbd_isr(coreid, TUSB_EVENT_BUS_RESET);
+      bus_reset();
+      usbd_bus_reset(coreid);
     }
 
     // TODO invoke some callbacks
@@ -173,7 +182,7 @@ void dcd_isr(uint8_t coreid)
 
   if (device_int_status & DEV_INT_ERROR_MASK)
   {
-    uint32_t error_status = sie_command_read(SIE_CMDCODE_READ_ERROR_STATUS, 1);
+    uint32_t error_status = sie_read(SIE_CMDCODE_READ_ERROR_STATUS, 1);
     (void) error_status;
 //    ASSERT(false, (void) 0);
   }
@@ -183,21 +192,14 @@ void dcd_isr(uint8_t coreid)
 //--------------------------------------------------------------------+
 // USBD-DCD API
 //--------------------------------------------------------------------+
-tusb_error_t dcd_init(void)
+static void bus_reset(void)
 {
-  //------------- user manual 11.13 usb device controller initialization -------------//  LPC_USB->USBEpInd = 0;
-  // step 6 : set up control endpoint
-  endpoint_set_max_packet_size(0, TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE);
-  endpoint_set_max_packet_size(1, TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE);
-
-	// step 7 : slave mode set up
+  // step 7 : slave mode set up
+  LPC_USB->USBEpIntClr     = 0xFFFFFFFF;          // clear all pending interrupt
+	LPC_USB->USBDevIntClr    = 0xFFFFFFFF;          // clear all pending interrupt
 	LPC_USB->USBEpIntEn      = (uint32_t) BIN8(11); // control endpoint cannot use DMA, non-control all use DMA
+	LPC_USB->USBEpIntPri     = 0;                   // same priority for all endpoint
 
-	LPC_USB->USBDevIntEn     = (DEV_INT_DEVICE_STATUS_MASK | DEV_INT_ENDPOINT_SLOW_MASK | DEV_INT_ERROR_MASK);
-	LPC_USB->USBDevIntClr    = 0xFFFFFFFF; // clear all pending interrupt
-
-	LPC_USB->USBEpIntClr     = 0xFFFFFFFF; // clear all pending interrupt
-	LPC_USB->USBEpIntPri     = 0;          // same priority for all endpoint
 
 	// step 8 : DMA set up
 	LPC_USB->USBEpDMADis     = 0xFFFFFFFF; // firstly disable all dma
@@ -205,6 +207,18 @@ tusb_error_t dcd_init(void)
 	LPC_USB->USBEoTIntClr    = 0xFFFFFFFF;
 	LPC_USB->USBNDDRIntClr   = 0xFFFFFFFF;
 	LPC_USB->USBSysErrIntClr = 0xFFFFFFFF;
+}
+
+tusb_error_t dcd_init(void)
+{
+  //------------- user manual 11.13 usb device controller initialization -------------//  LPC_USB->USBEpInd = 0;
+  // step 6 : set up control endpoint
+  endpoint_set_max_packet_size(0, TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE);
+  endpoint_set_max_packet_size(1, TUSB_CFG_DEVICE_CONTROL_ENDOINT_SIZE);
+
+  bus_reset();
+
+  LPC_USB->USBDevIntEn     = (DEV_INT_DEVICE_STATUS_MASK | DEV_INT_ENDPOINT_SLOW_MASK | DEV_INT_ERROR_MASK);
 
 	for (uint8_t index = 0; index < DCD_MAX_DD; index++)
 	{
@@ -214,26 +228,27 @@ tusb_error_t dcd_init(void)
 	LPC_USB->USBDMAIntEn = (DMA_INT_END_OF_XFER_MASK | DMA_INT_NEW_DD_REQUEST_MASK | DMA_INT_ERROR_MASK );
 
 	// clear all stall on control endpoint IN & OUT if any
-	sie_command_write(SIE_CMDCODE_ENDPOINT_SET_STATUS    , 1, 0);
-  sie_command_write(SIE_CMDCODE_ENDPOINT_SET_STATUS + 1, 1, 0);
+	sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS    , 1, 0);
+	sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS + 1, 1, 0);
+
+	sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, 1); // connect
 
   return TUSB_ERROR_NONE;
 }
 
 void dcd_controller_connect(uint8_t coreid)
 {
-  sie_command_write(SIE_CMDCODE_DEVICE_STATUS, 1, 1);
+  sie_write(SIE_CMDCODE_DEVICE_STATUS, 1, 1);
 }
 
 void dcd_controller_set_address(uint8_t coreid, uint8_t dev_addr)
 {
-  sie_command_write(SIE_CMDCODE_SET_ADDRESS, 1, 0x80 | dev_addr); // 7th bit is : device_enable
+  sie_write(SIE_CMDCODE_SET_ADDRESS, 1, 0x80 | dev_addr); // 7th bit is : device_enable
 }
 
-void dcd_controller_set_configuration(uint8_t coreid, uint8_t config_num)
+void dcd_controller_set_configuration(uint8_t coreid)
 {
-  (void) config_num; // supress compiler's warnings
-  sie_command_write(SIE_CMDCODE_CONFIGURE_DEVICE, 1, 1);
+  sie_write(SIE_CMDCODE_CONFIGURE_DEVICE, 1, 1);
 }
 
 //--------------------------------------------------------------------+
@@ -245,10 +260,8 @@ static inline uint16_t length_unit_byte2dword(uint16_t length_in_bytes)
   return (length_in_bytes + 3) / 4; // length_in_dword
 }
 
-tusb_error_t dcd_pipe_control_write(uint8_t coreid, void const * buffer, uint16_t length)
+static tusb_error_t pipe_control_write(void const * buffer, uint16_t length)
 {
-  (void) coreid; // suppress compiler warning
-
   ASSERT( length !=0 || buffer == NULL, TUSB_ERROR_INVALID_PARA);
 
   LPC_USB->USBCtrl   = SLAVE_CONTROL_WRITE_ENABLE_MASK; // logical endpoint = 0
@@ -262,16 +275,16 @@ tusb_error_t dcd_pipe_control_write(uint8_t coreid, void const * buffer, uint16_
 
 	LPC_USB->USBCtrl   = 0;
 
-	sie_command_write(SIE_CMDCODE_ENDPOINT_SELECT+1, 0, 0); // select control IN endpoint
-	sie_command_write(SIE_CMDCODE_BUFFER_VALIDATE  , 0, 0);
+	sie_write(SIE_CMDCODE_ENDPOINT_SELECT+1, 0, 0); // select control IN endpoint
+	sie_write(SIE_CMDCODE_BUFFER_VALIDATE  , 0, 0);
 
   return TUSB_ERROR_NONE;
 }
 
-tusb_error_t dcd_pipe_control_read(uint8_t coreid, void * buffer, uint16_t length)
+static tusb_error_t pipe_control_read(void * buffer, uint16_t length)
 {
   LPC_USB->USBCtrl = SLAVE_CONTROL_READ_ENABLE_MASK; // logical endpoint = 0
-  while ((LPC_USB->USBRxPLen & SLAVE_RXPLEN_PACKET_READY_MASK) == 0) {}
+  while ((LPC_USB->USBRxPLen & SLAVE_RXPLEN_PACKET_READY_MASK) == 0) {} // TODO blocking, should have timeout
 
   uint16_t actual_length = min16_of(length, (uint16_t) (LPC_USB->USBRxPLen & SLAVE_RXPLEN_PACKET_LENGTH_MASK) );
   uint32_t *p_read_data = (uint32_t*) buffer;
@@ -280,25 +293,49 @@ tusb_error_t dcd_pipe_control_read(uint8_t coreid, void * buffer, uint16_t lengt
     *p_read_data = LPC_USB->USBRxData;
     p_read_data++; // increase by 4 ( sizeof(uint32_t) )
   }
-  LPC_USB->USBCtrl = 0;
+  LPC_USB->USBCtrl = 0; // TODO not needed ?
 
   return TUSB_ERROR_NONE;
 }
 
-// TODO inline function
-void dcd_pipe_control_write_zero_length(uint8_t coreid)
-{
-  dcd_pipe_control_write(coreid, NULL, 0);
-}
-
 static inline uint8_t endpoint_address_to_physical_index(uint8_t ep_address) ATTR_ALWAYS_INLINE ATTR_CONST;
 static inline uint8_t endpoint_address_to_physical_index(uint8_t ep_address)
 {
   return (ep_address << 1) + (ep_address & 0x80 ? 1 : 0 );
 }
 
-tusb_error_t dcd_pipe_open(uint8_t coreid, tusb_descriptor_endpoint_t const * p_endpoint_desc)
+//--------------------------------------------------------------------+
+// CONTROL PIPE API
+//--------------------------------------------------------------------+
+void dcd_pipe_control_stall(uint8_t coreid)
+{
+  ASSERT(false, VOID_RETURN);
+}
+
+tusb_error_t dcd_pipe_control_xfer(uint8_t coreid, tusb_direction_t dir, void * p_buffer, uint16_t length)
+{
+  (void) coreid;
+
+  if ( dir )
+  {
+    ASSERT_STATUS ( pipe_control_write(p_buffer, length) );
+  }else
+  {
+    ASSERT_STATUS ( pipe_control_read(p_buffer, length) );
+  }
+
+  return TUSB_ERROR_NONE;
+}
+
+//--------------------------------------------------------------------+
+// BULK/INTERRUPT/ISO PIPE API
+//--------------------------------------------------------------------+
+endpoint_handle_t dcd_pipe_open(uint8_t coreid, tusb_descriptor_endpoint_t const * p_endpoint_desc, uint8_t class_code)
 {
+  (void) coreid;
+
+  return (endpoint_handle_t) { 0 };
+
   uint8_t phy_ep = endpoint_address_to_physical_index( p_endpoint_desc->bEndpointAddress );
 
   //------------- Realize Endpoint with Max Packet Size -------------//
@@ -312,11 +349,25 @@ tusb_error_t dcd_pipe_open(uint8_t coreid, tusb_descriptor_endpoint_t const * p_
 
 	LPC_USB->USBEpDMAEn = BIT_(phy_ep);
 
-	sie_command_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+phy_ep, 1, 0); // clear all endpoint status
+	sie_write(SIE_CMDCODE_ENDPOINT_SET_STATUS+phy_ep, 1, 0); // clear all endpoint status
 
-  return TUSB_ERROR_NONE;
 }
 
-//tusb_error_t dcd_pipe_xfer()
+bool dcd_pipe_is_busy(endpoint_handle_t edpt_hdl)
+{
+  ASSERT(false, false);
+}
+
+tusb_error_t dcd_pipe_clear_stall(uint8_t coreid, uint8_t edpt_addr)
+{
+  return TUSB_ERROR_FAILED;
+}
+
+tusb_error_t dcd_pipe_xfer(endpoint_handle_t edpt_hdl, void * buffer, uint16_t total_bytes, bool int_on_complete)
+{
+  ASSERT_STATUS(TUSB_ERROR_FAILED);
+
+  return TUSB_ERROR_NONE;
+}
 
 #endif

tinyusb/device/dcd_lpc175x_6x.h

@@ -144,11 +144,11 @@ enum {
 };
 
 //------------- SIE Command Code -------------//
-enum {
+typedef enum {
   SIE_CMDPHASE_WRITE   = 1,
   SIE_CMDPHASE_READ    = 2,
   SIE_CMDPHASE_COMMAND = 5
-};
+} sie_cmdphase_t;
 
 enum {
   // device commands

tinyusb/device/dcd_lpc43xx.c

@@ -339,7 +339,7 @@ static inline uint8_t qtd_find_free(uint8_t coreid)
 //--------------------------------------------------------------------+
 void dcd_pipe_control_stall(uint8_t coreid)
 {
-  LPC_USB[coreid]->ENDPTCTRL0 |= (ENDPTCTRL_MASK_STALL << 16); // stall Control IN
+  LPC_USB[coreid]->ENDPTCTRL0 |= (ENDPTCTRL_MASK_STALL << 16); // stall Control IN TODO stall control OUT as well
 }
 
 // control transfer does not need to use qtd find function

tinyusb/device/dcd_lpc_11uxx_13uxx.c

@@ -310,18 +310,6 @@ tusb_error_t dcd_pipe_control_xfer(uint8_t coreid, tusb_direction_t dir, void *
 //--------------------------------------------------------------------+
 // PIPE HELPER
 //--------------------------------------------------------------------+
-//static inline uint8_t edpt_pos2phy(uint8_t pos) ATTR_CONST ATTR_ALWAYS_INLINE;
-//static inline uint8_t edpt_pos2phy(uint8_t pos)
-//{ // 0-5 --> OUT, 16-21 IN
-//  return (pos < DCD_QHD_MAX/2) ? (2*pos) : (2*(pos-16)+1);
-//}
-
-//static inline uint8_t edpt_phy2pos(uint8_t physical_endpoint) ATTR_CONST ATTR_ALWAYS_INLINE;
-//static inline uint8_t edpt_phy2pos(uint8_t physical_endpoint)
-//{
-//  return physical_endpoint/2 + ( (physical_endpoint%2) ? 16 : 0);
-//}
-
 static inline uint8_t edpt_addr2phy(uint8_t endpoint_addr) ATTR_CONST ATTR_ALWAYS_INLINE;
 static inline uint8_t edpt_addr2phy(uint8_t endpoint_addr)
 {

tinyusb/device/usbd.c

@@ -50,7 +50,7 @@
 #include "usbd_dcd.h"
 
 // Some MCUs cannot transfer more than 64 bytes each queue, thus require special task-alike treatment
-#if MCU == MCU_LPC11UXX
+#if MCU == MCU_LPC11UXX || MCU == MCU_LPC175X_6X
   #define USBD_CONTROL_ONE_PACKET_EACH_XFER // for each Transfer, cannot queue more than packet size
   enum {
     USBD_COTNROL_MAX_LENGTH_EACH_XFER = 64
@@ -184,7 +184,7 @@ tusb_error_t usbd_body_subtask(void)
 
         if ( TUSB_ERROR_NONE == error )
         {
-          dcd_pipe_control_xfer(coreid, control_request.bmRequestType_bit.direction, p_buffer, length); // zero length
+          dcd_pipe_control_xfer(coreid, control_request.bmRequestType_bit.direction, p_buffer, length);
         }
       }
       else if ( TUSB_REQUEST_SET_ADDRESS == control_request.bRequest )

tinyusb/device/usbd.h

@@ -90,7 +90,7 @@ bool tusbd_is_configured(uint8_t coreid) ATTR_WARN_UNUSED_RESULT;
 #ifdef _TINY_USB_SOURCE_FILE_
 
 tusb_error_t usbd_init(void);
-
+OSAL_TASK_FUNCTION (usbd_task) (void* p_task_para);
 #endif
 
 #ifdef __cplusplus

tinyusb/hal/hal_lpc175x_6x.c

@@ -46,10 +46,6 @@
 #include "common/common.h"
 #include "hal.h"
 
-enum {
-  PCONP_PCUSB = 31
-};
-
 //--------------------------------------------------------------------+
 // IMPLEMENTATION
 //--------------------------------------------------------------------+
@@ -66,7 +62,7 @@ tusb_error_t hal_init(void)
 //  LPC_PINCON->PINSEL3 &= ~(3<<6); TODO HOST
 //  LPC_PINCON->PINSEL3 |= (2<<6);
 
-  LPC_SC->PCONP |= BIT_(PCONP_PCUSB);                	/* USB PCLK -> enable USB Per.*/
+  LPC_SC->PCONP |= CLKPWR_PCONP_PCUSB;                	/* USB PCLK -> enable USB Per.*/
 
   // DEVICE mode
   LPC_USB->USBClkCtrl = 0x12;                 /* Dev, PortSel, AHB clock enable */

tinyusb/hal/hal_lpc175x_6x.h

@@ -47,6 +47,7 @@
 #define _TUSB_HAL_LPC175X_6X_H_
 
 #include "LPC17xx.h"
+#include "lpc17xx_clkpwr.h"
 
 #ifdef __cplusplus
  extern "C" {