update example config and descriptor with better Highspeed support

examples/device/cdc_msc_freertos/src/usb_descriptors.c

@@ -123,7 +123,7 @@ uint8_t const desc_configuration[] =
   TUD_CDC_DESCRIPTOR(ITF_NUM_CDC, 4, EPNUM_CDC_NOTIF, 8, EPNUM_CDC_OUT, EPNUM_CDC_IN, 64),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 5, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
 };
 
 

examples/device/dfu_rt/src/tusb_config.h

@@ -16,19 +16,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_NONE
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/dynamic_configuration/src/tusb_config.h

@@ -34,19 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_NONE
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/dynamic_configuration/src/usb_descriptors.c

@@ -166,7 +166,7 @@ uint8_t const desc_configuration_0[] =
   TUD_CDC_DESCRIPTOR(ITF_0_NUM_CDC, 0, EPNUM_0_CDC_NOTIF, 8, EPNUM_0_CDC_OUT, EPNUM_0_CDC_IN, 64),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+  TUD_MIDI_DESCRIPTOR(ITF_0_NUM_MIDI, 0, EPNUM_0_MIDI_OUT, EPNUM_0_MIDI_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
 };
 
 
@@ -176,7 +176,7 @@ uint8_t const desc_configuraiton_1[] =
   TUD_CONFIG_DESCRIPTOR(1, ITF_1_NUM_TOTAL, 0, CONFIG_1_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+  TUD_MSC_DESCRIPTOR(ITF_1_NUM_MSC, 0, EPNUM_1_MSC_OUT, EPNUM_1_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
 };
 
 

examples/device/hid_composite/src/tusb_config.h

@@ -34,19 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_NONE
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/hid_composite_freertos/src/tusb_config.h

@@ -34,18 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || CFG_TUSB_MCU == OPT_MCU_NUC505
-#define CFG_TUSB_RHPORT0_MODE       (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-#define CFG_TUSB_RHPORT0_MODE       OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_FREERTOS
+// This examples use FreeRTOS
+#define CFG_TUSB_OS               OPT_OS_FREERTOS
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/hid_generic_inout/src/tusb_config.h

@@ -34,19 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_NONE
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/midi_test/src/usb_descriptors.c

@@ -94,7 +94,7 @@ uint8_t const desc_configuration[] =
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64)
+  TUD_MIDI_DESCRIPTOR(ITF_NUM_MIDI, 0, EPNUM_MIDI, 0x80 | EPNUM_MIDI, TUD_OPT_HIGH_SPEED ? 512 : 64)
 };
 
 // Invoked when received GET CONFIGURATION DESCRIPTOR

examples/device/msc_dual_lun/src/tusb_config.h

@@ -34,19 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_NONE
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/msc_dual_lun/src/usb_descriptors.c

@@ -102,7 +102,7 @@ uint8_t const desc_configuration[] =
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EPNUM_MSC_OUT, EPNUM_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
 };
 
 // Invoked when received GET CONFIGURATION DESCRIPTOR

examples/device/net_lwip_webserver/src/tusb_config.h

@@ -34,19 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_NONE
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/usbtmc/src/tusb_config.h

@@ -16,18 +16,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
-#define CFG_TUSB_OS                 OPT_OS_NONE
+
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

examples/device/webusb_serial/src/tusb_config.h

@@ -34,19 +34,38 @@
 // COMMON CONFIGURATION
 //--------------------------------------------------------------------
 
-// defined by compiler flags for flexibility
+// defined by board.mk
 #ifndef CFG_TUSB_MCU
   #error CFG_TUSB_MCU must be defined
 #endif
 
-#if CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
-    CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56
-  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | OPT_MODE_HIGH_SPEED)
+// RHPort number used for device can be defined by board.mk, default to port 0
+#ifndef BOARD_DEVICE_RHPORT_NUM
+  #define BOARD_DEVICE_RHPORT_NUM     0
+#endif
+
+// RHPort max operational speed can defined by board.mk
+// Default to Highspeed for MCU with internal HighSpeed PHY (can be port specific), otherwise FullSpeed
+#ifndef BOARD_DEVICE_RHPORT_SPEED
+  #if (CFG_TUSB_MCU == OPT_MCU_LPC18XX || CFG_TUSB_MCU == OPT_MCU_LPC43XX || CFG_TUSB_MCU == OPT_MCU_MIMXRT10XX || \
+       CFG_TUSB_MCU == OPT_MCU_NUC505  || CFG_TUSB_MCU == OPT_MCU_CXD56)
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_HIGH_SPEED
+  #else
+    #define BOARD_DEVICE_RHPORT_SPEED   OPT_MODE_FULL_SPEED
+  #endif
+#endif
+
+// Device mode with rhport and speed defined by board.mk
+#if   BOARD_DEVICE_RHPORT_NUM == 0
+  #define CFG_TUSB_RHPORT0_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
+#elif BOARD_DEVICE_RHPORT_NUM == 1
+  #define CFG_TUSB_RHPORT1_MODE     (OPT_MODE_DEVICE | BOARD_DEVICE_RHPORT_SPEED)
 #else
-  #define CFG_TUSB_RHPORT0_MODE     OPT_MODE_DEVICE
+  #error "Incorrect RHPort configuration"
 #endif
 
-#define CFG_TUSB_OS                 OPT_OS_NONE
+// This example doesn't use an RTOS
+#define CFG_TUSB_OS               OPT_OS_NONE
 
 // CFG_TUSB_DEBUG is defined by compiler in DEBUG build
 // #define CFG_TUSB_DEBUG           0

test/test/device/msc/test_msc_device.c

@@ -66,7 +66,7 @@ uint8_t const data_desc_configuration[] =
   TUD_CONFIG_DESCRIPTOR(1, ITF_NUM_TOTAL, 0, CONFIG_TOTAL_LEN, TUSB_DESC_CONFIG_ATT_REMOTE_WAKEUP, 100),
 
   // Interface number, string index, EP Out & EP In address, EP size
-  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EDPT_MSC_OUT, EDPT_MSC_IN, (CFG_TUSB_RHPORT0_MODE & OPT_MODE_HIGH_SPEED) ? 512 : 64),
+  TUD_MSC_DESCRIPTOR(ITF_NUM_MSC, 0, EDPT_MSC_OUT, EDPT_MSC_IN, TUD_OPT_HIGH_SPEED ? 512 : 64),
 };
 
 tusb_control_request_t const request_set_configuration =