Merge pull request #1354 from hathach/mcu-specific

Mcu specific

src/common/tusb_mcu_attr.h → src/common/tusb_mcu.h

@@ -24,8 +24,22 @@
  * This file is part of the TinyUSB stack.
  */
 
-#ifndef TUSB_MCU_ATTR_H_
-#define TUSB_MCU_ATTR_H_
+#ifndef TUSB_MCU_H_
+#define TUSB_MCU_H_
+
+//--------------------------------------------------------------------+
+// Port Specific
+// TUP stand for TinyUSB Port (can be renamed)
+//--------------------------------------------------------------------+
+
+//------------- Unaligned Memory Access -------------//
+
+// ARMv7+ (M3-M7, M23-M33) can access unaligned memory
+#if (defined(__ARM_ARCH) && (__ARM_ARCH >= 7))
+  #define TUP_ARCH_STRICT_ALIGN   0
+#else
+  #define TUP_ARCH_STRICT_ALIGN   1
+#endif
 
 /* USB Controller Attributes for Device, Host or MCU (both)
  * - ENDPOINT_MAX: max (logical) number of endpoint
@@ -37,107 +51,124 @@
 
 //------------- NXP -------------//
 #if   TU_CHECK_MCU(OPT_MCU_LPC11UXX, OPT_MCU_LPC13XX, OPT_MCU_LPC15XX)
-  #define DCD_ATTR_ENDPOINT_MAX   5
+  #define TUP_DCD_ENDPOINT_MAX    5
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC175X_6X, OPT_MCU_LPC177X_8X, OPT_MCU_LPC40XX)
-  #define DCD_ATTR_ENDPOINT_MAX   16
-  #define HCD_ATTR_OHCI
+  #define TUP_DCD_ENDPOINT_MAX    16
+  #define TUP_USBIP_OHCI
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC18XX, OPT_MCU_LPC43XX)
   // TODO USB0 has 6, USB1 has 4
-  #define MCU_ATTR_CONTROLLER_CHIPIDEA_HS
-  #define DCD_ATTR_ENDPOINT_MAX     6
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01 // Port0 HS, Port1 FS
+  #define TUP_USBIP_CHIPIDEA_HS
+  #define TUP_USBIP_EHCI
+
+  #define TUP_DCD_ENDPOINT_MAX    6
+  #define TUP_RHPORT_HIGHSPEED    0x01 // Port0 HS, Port1 FS
 
-  #define HCD_ATTR_EHCI
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC51UXX)
-   #define DCD_ATTR_ENDPOINT_MAX   5
+   #define TUP_DCD_ENDPOINT_MAX   5
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC54XXX)
   // TODO USB0 has 5, USB1 has 6
-  #define DCD_ATTR_ENDPOINT_MAX   6
+  #define TUP_DCD_ENDPOINT_MAX    6
 
 #elif TU_CHECK_MCU(OPT_MCU_LPC55XX)
   // TODO USB0 has 5, USB1 has 6
-  #define DCD_ATTR_ENDPOINT_MAX   6
+  #define TUP_DCD_ENDPOINT_MAX    6
 
 #elif TU_CHECK_MCU(OPT_MCU_MIMXRT10XX)
-  #define MCU_ATTR_CONTROLLER_CHIPIDEA_HS
-  #define DCD_ATTR_ENDPOINT_MAX     8
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x03 // Port0 HS, Port1 HS
+  #define TUP_USBIP_CHIPIDEA_HS
+  #define TUP_USBIP_EHCI
+
+  #define TUP_DCD_ENDPOINT_MAX    8
+  #define TUP_RHPORT_HIGHSPEED    0x03 // Port0 HS, Port1 HS
 
-  #define HCD_ATTR_EHCI
 
 #elif TU_CHECK_MCU(OPT_MCU_MKL25ZXX, OPT_MCU_K32L2BXX)
-  #define DCD_ATTR_ENDPOINT_MAX   16
+  #define TUP_DCD_ENDPOINT_MAX    16
 
 #elif TU_CHECK_MCU(OPT_MCU_MM32F327X)
-  #define DCD_ATTR_ENDPOINT_MAX   16
+  #define TUP_DCD_ENDPOINT_MAX    16
 
 //------------- Nordic -------------//
 #elif TU_CHECK_MCU(OPT_MCU_NRF5X)
   // 8 CBI + 1 ISO
-  #define DCD_ATTR_ENDPOINT_MAX   9
+  #define TUP_DCD_ENDPOINT_MAX    9
 
 //------------- Microchip -------------//
 #elif TU_CHECK_MCU(OPT_MCU_SAMD21, OPT_MCU_SAMD51, OPT_MCU_SAME5X) || \
       TU_CHECK_MCU(OPT_MCU_SAMD11, OPT_MCU_SAML21, OPT_MCU_SAML22)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 #elif TU_CHECK_MCU(OPT_MCU_SAMG)
-  #define DCD_ATTR_ENDPOINT_MAX   6
-  #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
+  #define TUP_DCD_ENDPOINT_MAX    6
+  #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER
 
 #elif TU_CHECK_MCU(OPT_MCU_SAMX7X)
-  #define DCD_ATTR_ENDPOINT_MAX     10
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
-  #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
+  #define TUP_DCD_ENDPOINT_MAX    10
+  #define TUP_RHPORT_HIGHSPEED    0x01
+  #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER
 
 #elif TU_CHECK_MCU(OPT_MCU_PIC32MZ)
-  #define DCD_ATTR_ENDPOINT_MAX   8
-  #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
+  #define TUP_DCD_ENDPOINT_MAX    8
+  #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER
 
 //------------- ST -------------//
 #elif TU_CHECK_MCU(OPT_MCU_STM32F0)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32F1)
   #if defined (STM32F105x8) || defined (STM32F105xB) || defined (STM32F105xC) || \
       defined (STM32F107xB) || defined (STM32F107xC)
-    #define DCD_ATTR_ENDPOINT_MAX   4
-    #define DCD_ATTR_DWC2_STM32
+    #define TUP_USBIP_DWC2
+    #define TUP_USBIP_DWC2_STM32
+
+    #define TUP_DCD_ENDPOINT_MAX  4
   #else
-    #define DCD_ATTR_ENDPOINT_MAX   8
+    #define TUP_DCD_ENDPOINT_MAX  8
   #endif
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32F2)
+  #define TUP_USBIP_DWC2
+  #define TUP_USBIP_DWC2_STM32
+
   // FS has 4 ep, HS has 5 ep
-  #define DCD_ATTR_ENDPOINT_MAX   6
-  #define DCD_ATTR_DWC2_STM32
+  #define TUP_DCD_ENDPOINT_MAX    6
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32F3)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32F4)
+  #define TUP_USBIP_DWC2
+  #define TUP_USBIP_DWC2_STM32
+
   // For most mcu, FS has 4, HS has 6. TODO 446/469/479 HS has 9
-  #define DCD_ATTR_ENDPOINT_MAX   6
-  #define DCD_ATTR_DWC2_STM32
+  #define TUP_DCD_ENDPOINT_MAX    6
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32F7)
+  #define TUP_USBIP_DWC2
+  #define TUP_USBIP_DWC2_STM32
+
   // FS has 6, HS has 9
-  #define DCD_ATTR_ENDPOINT_MAX   9
-  #define DCD_ATTR_DWC2_STM32
+  #define TUP_DCD_ENDPOINT_MAX    9
+
+  // MCU with on-chip HS Phy
+  #if defined(STM32F723xx) || defined(STM32F730xx) || defined(STM32F733xx)
+    #define TUP_RHPORT_HIGHSPEED  0x02 // Port 0: FS, Port 1: HS
+  #endif
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32H7)
-  #define DCD_ATTR_ENDPOINT_MAX   9
-  #define DCD_ATTR_DWC2_STM32
+  #define TUP_USBIP_DWC2
+  #define TUP_USBIP_DWC2_STM32
+
+  #define TUP_DCD_ENDPOINT_MAX    9
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32G4)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32L0, OPT_MCU_STM32L1)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 #elif TU_CHECK_MCU(OPT_MCU_STM32L4)
   #if defined (STM32L475xx) || defined (STM32L476xx) ||                          \
@@ -145,85 +176,92 @@
       defined (STM32L4A6xx) || defined (STM32L4P5xx) || defined (STM32L4Q5xx) || \
       defined (STM32L4R5xx) || defined (STM32L4R7xx) || defined (STM32L4R9xx) || \
       defined (STM32L4S5xx) || defined (STM32L4S7xx) || defined (STM32L4S9xx)
-    #define DCD_ATTR_ENDPOINT_MAX   6
-    #define DCD_ATTR_DWC2_STM32
+    #define TUP_USBIP_DWC2
+    #define TUP_USBIP_DWC2_STM32
+
+    #define TUP_DCD_ENDPOINT_MAX  6
   #else
-    #define DCD_ATTR_ENDPOINT_MAX   8
+    #define TUP_DCD_ENDPOINT_MAX  8
   #endif
 
 //------------- Sony -------------//
 #elif TU_CHECK_MCU(OPT_MCU_CXD56)
-  #define DCD_ATTR_ENDPOINT_MAX     7
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
-  #define DCD_ATTR_ENDPOINT_EXCLUSIVE_NUMBER
+  #define TUP_DCD_ENDPOINT_MAX    7
+  #define TUP_RHPORT_HIGHSPEED    0x01
+  #define TUP_DCD_ENDPOINT_EXCLUSIVE_NUMBER
 
 //------------- TI -------------//
 #elif TU_CHECK_MCU(OPT_MCU_MSP430x5xx)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 #elif TU_CHECK_MCU(OPT_MCU_MSP432E4, OPT_MCU_TM4C123, OPT_MCU_TM4C129)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 //------------- ValentyUSB -------------//
 #elif TU_CHECK_MCU(OPT_MCU_VALENTYUSB_EPTRI)
-  #define DCD_ATTR_ENDPOINT_MAX   16
+  #define TUP_DCD_ENDPOINT_MAX    16
 
 //------------- Nuvoton -------------//
 #elif TU_CHECK_MCU(OPT_MCU_NUC121, OPT_MCU_NUC126)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 #elif TU_CHECK_MCU(OPT_MCU_NUC120)
-  #define DCD_ATTR_ENDPOINT_MAX   6
+  #define TUP_DCD_ENDPOINT_MAX    6
 
 #elif TU_CHECK_MCU(OPT_MCU_NUC505)
-  #define DCD_ATTR_ENDPOINT_MAX     12
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
+  #define TUP_DCD_ENDPOINT_MAX    12
+  #define TUP_RHPORT_HIGHSPEED    0x01
 
 //------------- Espressif -------------//
 #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
-  #define DCD_ATTR_ENDPOINT_MAX   6
+  #define TUP_USBIP_DWC2
+  #define TUP_DCD_ENDPOINT_MAX    6
 
 //------------- Dialog -------------//
 #elif TU_CHECK_MCU(OPT_MCU_DA1469X)
-  #define DCD_ATTR_ENDPOINT_MAX   4
+  #define TUP_DCD_ENDPOINT_MAX    4
 
 //------------- Raspberry Pi -------------//
 #elif TU_CHECK_MCU(OPT_MCU_RP2040)
-  #define DCD_ATTR_ENDPOINT_MAX   16
+  #define TUP_DCD_ENDPOINT_MAX    16
 
 //------------- Silabs -------------//
 #elif TU_CHECK_MCU(OPT_MCU_EFM32GG)
-  #define DCD_ATTR_ENDPOINT_MAX   7
+  #define TUP_USBIP_DWC2
+  #define TUP_DCD_ENDPOINT_MAX    7
 
 //------------- Renesas -------------//
 #elif TU_CHECK_MCU(OPT_MCU_RX63X, OPT_MCU_RX65X, OPT_MCU_RX72N)
-  #define DCD_ATTR_ENDPOINT_MAX   10
+  #define TUP_DCD_ENDPOINT_MAX    10
 
 //------------- GigaDevice -------------//
 #elif TU_CHECK_MCU(OPT_MCU_GD32VF103)
-  #define DCD_ATTR_ENDPOINT_MAX   4
+  #define TUP_USBIP_DWC2
+  #define TUP_DCD_ENDPOINT_MAX    4
 
 //------------- Broadcom -------------//
 #elif TU_CHECK_MCU(OPT_MCU_BCM2711, OPT_MCU_BCM2835, OPT_MCU_BCM2837)
-  #define DCD_ATTR_ENDPOINT_MAX     8
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
+  #define TUP_USBIP_DWC2
+  #define TUP_DCD_ENDPOINT_MAX    8
+  #define TUP_RHPORT_HIGHSPEED    0x01
 
 //------------- Broadcom -------------//
 #elif TU_CHECK_MCU(OPT_MCU_XMC4000)
-  #define DCD_ATTR_ENDPOINT_MAX   8
+  #define TUP_USBIP_DWC2
+  #define TUP_DCD_ENDPOINT_MAX    8
 
 //------------- BridgeTek -------------//
 #elif TU_CHECK_MCU(OPT_MCU_FT90X)
-  #define DCD_ATTR_ENDPOINT_MAX     8
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
+  #define TUP_DCD_ENDPOINT_MAX    8
+  #define TUP_RHPORT_HIGHSPEED    0x01
 
 #elif TU_CHECK_MCU(OPT_MCU_FT93X)
-  #define DCD_ATTR_ENDPOINT_MAX     16
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x01
+  #define TUP_DCD_ENDPOINT_MAX    16
+  #define TUP_RHPORT_HIGHSPEED    0x01
 
 //------------ Allwinner -------------//
 #elif TU_CHECK_MCU(OPT_MCU_F1C100S)
-  #define DCD_ATTR_ENDPOINT_MAX   4
+  #define TUP_DCD_ENDPOINT_MAX    4
 
 #endif
 
@@ -231,14 +269,14 @@
 // Default Values
 //--------------------------------------------------------------------+
 
-#ifndef DCD_ATTR_ENDPOINT_MAX
-  #warning "DCD_ATTR_ENDPOINT_MAX is not defined for this MCU, default to 8"
-  #define DCD_ATTR_ENDPOINT_MAX   8
+#ifndef TUP_DCD_ENDPOINT_MAX
+  #warning "TUP_DCD_ENDPOINT_MAX is not defined for this MCU, default to 8"
+  #define TUP_DCD_ENDPOINT_MAX    8
 #endif
 
 // Default to fullspeed if not defined
-#ifndef DCD_ATTR_RHPORT_HIGHSPEED
-  #define DCD_ATTR_RHPORT_HIGHSPEED 0x00
+#ifndef TUP_RHPORT_HIGHSPEED
+  #define TUP_RHPORT_HIGHSPEED    0x00
 #endif
 
 #endif

src/device/dcd.h

@@ -40,7 +40,7 @@
 //--------------------------------------------------------------------+
 
 #ifndef CFG_TUD_ENDPPOINT_MAX
-  #define CFG_TUD_ENDPPOINT_MAX   DCD_ATTR_ENDPOINT_MAX
+  #define CFG_TUD_ENDPPOINT_MAX   TUP_DCD_ENDPOINT_MAX
 #endif
 
 //--------------------------------------------------------------------+

src/portable/chipidea/ci_hs/dcd_ci_hs.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUD_ENABLED && defined(MCU_ATTR_CONTROLLER_CHIPIDEA_HS)
+#if CFG_TUD_ENABLED && defined(TUP_USBIP_CHIPIDEA_HS)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -151,8 +151,8 @@ typedef struct {
   // Must be at 2K alignment
   // Each endpoint with direction (IN/OUT) occupies a queue head
   // for portability, TinyUSB only queue 1 TD for each Qhd
-  dcd_qhd_t qhd[DCD_ATTR_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(64);
-  dcd_qtd_t qtd[DCD_ATTR_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32);
+  dcd_qhd_t qhd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(64);
+  dcd_qtd_t qtd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32);
 }dcd_data_t;
 
 CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048)
@@ -619,7 +619,7 @@ void dcd_int_handler(uint8_t rhport)
 
     if ( edpt_complete )
     {
-      for(uint8_t epnum = 0; epnum < DCD_ATTR_ENDPOINT_MAX; epnum++)
+      for(uint8_t epnum = 0; epnum < TUP_DCD_ENDPOINT_MAX; epnum++)
       {
         if ( tu_bit_test(edpt_complete, epnum)    ) process_edpt_complete_isr(rhport, epnum, TUSB_DIR_OUT);
         if ( tu_bit_test(edpt_complete, epnum+16) ) process_edpt_complete_isr(rhport, epnum, TUSB_DIR_IN);

src/portable/ehci/ehci.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUH_ENABLED && defined(HCD_ATTR_EHCI)
+#if CFG_TUH_ENABLED && defined(TUP_USBIP_EHCI)
 
 //--------------------------------------------------------------------+
 // INCLUDE
@@ -45,7 +45,7 @@
 #define EHCI_DBG     2
 
 // Framelist size as small as possible to save SRAM
-#ifdef MCU_ATTR_CONTROLLER_CHIPIDEA_HS
+#ifdef TUP_USBIP_CHIPIDEA_HS
   // NXP Transdimension: 8 elements
   #define FRAMELIST_SIZE_BIT_VALUE      7u
   #define FRAMELIST_SIZE_USBCMD_VALUE   (((FRAMELIST_SIZE_BIT_VALUE &  3) << EHCI_USBCMD_POS_FRAMELIST_SIZE) | \

src/portable/mentor/musb/dcd_musb.c

@@ -170,13 +170,13 @@ static inline void print_block_list(free_block_t const *blk, unsigned num)
 
 static unsigned find_free_memory(uint_fast16_t size_in_log2_minus3)
 {
-  free_block_t free_blocks[2 * (DCD_ATTR_ENDPOINT_MAX - 1)];
+  free_block_t free_blocks[2 * (TUP_DCD_ENDPOINT_MAX - 1)];
   unsigned num_blocks = 1;
 
   /* Initialize free memory block list */
   free_blocks[0].beg = 64 / 8;
   free_blocks[0].end = (4 << 10) / 8; /* 4KiB / 8 bytes */
-  for (int i = 1; i < DCD_ATTR_ENDPOINT_MAX; ++i) {
+  for (int i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) {
     uint_fast16_t addr;
     int num;
     USB0->EPIDX = i;
@@ -575,7 +575,7 @@ static void process_bus_reset(uint8_t rhport)
   USB0->RXIE = 0; 
 
   /* Clear FIFO settings */
-  for (unsigned i = 1; i < DCD_ATTR_ENDPOINT_MAX; ++i) {
+  for (unsigned i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) {
     USB0->EPIDX     = i;
     USB0->TXFIFOSZ  = 0;
     USB0->TXFIFOADD = 0;
@@ -663,7 +663,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc)
   const unsigned xfer    = ep_desc->bmAttributes.xfer;
   const unsigned mps     = tu_edpt_packet_size(ep_desc);
 
-  TU_ASSERT(epn < DCD_ATTR_ENDPOINT_MAX);
+  TU_ASSERT(epn < TUP_DCD_ENDPOINT_MAX);
 
   pipe_state_t *pipe = &_dcd.pipe[dir_in][epn - 1];
   pipe->buf       = NULL;
@@ -715,7 +715,7 @@ void dcd_edpt_close_all(uint8_t rhport)
   NVIC_DisableIRQ(USB0_IRQn);
   USB0->TXIE = 1; /* Enable only EP0 */
   USB0->RXIE = 0; 
-  for (unsigned i = 1; i < DCD_ATTR_ENDPOINT_MAX; ++i) {
+  for (unsigned i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) {
     regs->TXMAXP = 0;
     regs->TXCSRH = 0;
     if (regs->TXCSRL & USB_TXCSRL1_TXRDY)

src/portable/nxp/transdimension/dcd_transdimension.c

@@ -179,8 +179,8 @@ typedef struct {
   // Must be at 2K alignment
   // Each endpoint with direction (IN/OUT) occupies a queue head
   // for portability, TinyUSB only queue 1 TD for each Qhd
-  dcd_qhd_t qhd[DCD_ATTR_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(64);
-  dcd_qtd_t qtd[DCD_ATTR_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32);
+  dcd_qhd_t qhd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(64);
+  dcd_qtd_t qtd[TUP_DCD_ENDPOINT_MAX][2] TU_ATTR_ALIGNED(32);
 }dcd_data_t;
 
 CFG_TUSB_MEM_SECTION TU_ATTR_ALIGNED(2048)
@@ -647,7 +647,7 @@ void dcd_int_handler(uint8_t rhport)
 
     if ( edpt_complete )
     {
-      for(uint8_t epnum = 0; epnum < DCD_ATTR_ENDPOINT_MAX; epnum++)
+      for(uint8_t epnum = 0; epnum < TUP_DCD_ENDPOINT_MAX; epnum++)
       {
         if ( tu_bit_test(edpt_complete, epnum)    ) process_edpt_complete_isr(rhport, epnum, TUSB_DIR_OUT);
         if ( tu_bit_test(edpt_complete, epnum+16) ) process_edpt_complete_isr(rhport, epnum, TUSB_DIR_IN);

src/portable/ohci/ohci.c

@@ -26,7 +26,7 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUH_ENABLED && defined(HCD_ATTR_OHCI)
+#if CFG_TUH_ENABLED && defined(TUP_USBIP_OHCI)
 
 //--------------------------------------------------------------------+
 // INCLUDE

src/portable/sunxi/dcd_sunxi_musb.c

@@ -426,7 +426,7 @@ static inline void print_block_list(free_block_t const *blk, unsigned num)
 
 static unsigned find_free_memory(uint_fast16_t size_in_log2_minus3)
 {
-  free_block_t free_blocks[2 * (DCD_ATTR_ENDPOINT_MAX - 1)];
+  free_block_t free_blocks[2 * (TUP_DCD_ENDPOINT_MAX - 1)];
   unsigned num_blocks = 1;
   /* Backup current EP to restore later */
   u8 backup_ep = USBC_GetActiveEp();
@@ -434,7 +434,7 @@ static unsigned find_free_memory(uint_fast16_t size_in_log2_minus3)
   /* Initialize free memory block list */
   free_blocks[0].beg = 64 / 8;
   free_blocks[0].end = (USB_FIFO_SIZE_KB << 10) / 8; /* 2KiB / 8 bytes */
-  for (int i = 1; i < DCD_ATTR_ENDPOINT_MAX; ++i) {
+  for (int i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) {
     uint_fast16_t addr;
     int num;
     USBC_SelectActiveEp(i);
@@ -974,7 +974,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * ep_desc)
   const unsigned xfer    = ep_desc->bmAttributes.xfer;
   const unsigned mps     = tu_edpt_packet_size(ep_desc);
 
-  TU_ASSERT(epn < DCD_ATTR_ENDPOINT_MAX);
+  TU_ASSERT(epn < TUP_DCD_ENDPOINT_MAX);
 
   pipe_state_t *pipe = &_dcd.pipe[dir_in][epn - 1];
   pipe->buf       = NULL;
@@ -1033,7 +1033,7 @@ void dcd_edpt_close_all(uint8_t rhport)
   musb_int_mask();
   USBC_Writew(1, USBC_REG_INTTxE(USBC0_BASE)); /* Enable only EP0 */
   USBC_Writew(0, USBC_REG_INTRxE(USBC0_BASE));
-  for (unsigned i = 1; i < DCD_ATTR_ENDPOINT_MAX; ++i) {
+  for (unsigned i = 1; i < TUP_DCD_ENDPOINT_MAX; ++i) {
     USBC_SelectActiveEp(i);
     USBC_Writew(0, USBC_REG_TXMAXP(USBC0_BASE));
 		USBC_Writew((1 << USBC_BP_TXCSR_D_MODE) | (1 << USBC_BP_TXCSR_D_CLEAR_DATA_TOGGLE) | (1 << USBC_BP_TXCSR_D_FLUSH_FIFO),

src/portable/synopsys/dwc2/dcd_dwc2.c

@@ -29,16 +29,12 @@
 
 #include "tusb_option.h"
 
-#if CFG_TUD_ENABLED && \
-    ( defined(DCD_ATTR_DWC2_STM32) || \
-      TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3, OPT_MCU_GD32VF103) || \
-      TU_CHECK_MCU(OPT_MCU_EFM32GG, OPT_MCU_BCM2711, OPT_MCU_BCM2835) || \
-      TU_CHECK_MCU(OPT_MCU_BCM2837, OPT_MCU_XMC4000) )
+#if CFG_TUD_ENABLED && defined(TUP_USBIP_DWC2)
 
 #include "device/dcd.h"
 #include "dwc2_type.h"
 
-#if defined(DCD_ATTR_DWC2_STM32)
+#if defined(TUP_USBIP_DWC2_STM32)
   #include "dwc2_stm32.h"
 #elif TU_CHECK_MCU(OPT_MCU_ESP32S2, OPT_MCU_ESP32S3)
   #include "dwc2_esp32.h"

src/tusb_option.h

@@ -172,7 +172,7 @@
   #include "tusb_config.h"
 #endif
 
-#include "common/tusb_mcu_attr.h"
+#include "common/tusb_mcu.h"
 
 //--------------------------------------------------------------------
 // RootHub Mode Configuration
@@ -218,7 +218,7 @@
 #endif
 
 #define CFG_TUD_ENABLED     ( TUD_RHPORT_MODE & OPT_MODE_DEVICE )
-#define TUD_OPT_HIGH_SPEED  ( (TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (DCD_ATTR_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT)) )
+#define TUD_OPT_HIGH_SPEED  ( (TUD_RHPORT_MODE & OPT_MODE_SPEED_MASK) ? (TUD_RHPORT_MODE & OPT_MODE_HIGH_SPEED) : (TUP_RHPORT_HIGHSPEED & (1 << TUD_OPT_RHPORT)) )
 
 //------------- Roothub as Host -------------//
 
@@ -239,6 +239,18 @@
 #define TUSB_OPT_DEVICE_ENABLED CFG_TUD_ENABLED
 #define TUSB_OPT_HOST_ENABLED   CFG_TUH_ENABLED
 
+// TODO move later
+// TUP_MCU_STRICT_ALIGN will overwrite TUP_ARCH_STRICT_ALIGN.
+// In case TUP_MCU_STRICT_ALIGN = 1 and TUP_ARCH_STRICT_ALIGN =0, we will not reply on compiler
+// to generate unaligned access code.
+// LPC_IP3511 Highspeed cannot access unaligned memory on USB_RAM
+#if TUD_OPT_HIGH_SPEED && (CFG_TUSB_MCU == OPT_MCU_LPC54XXX || CFG_TUSB_MCU == OPT_MCU_LPC55XX)
+  #define TUP_MCU_STRICT_ALIGN   1
+#else
+  #define TUP_MCU_STRICT_ALIGN   0
+#endif
+
+
 //--------------------------------------------------------------------+
 // COMMON OPTIONS
 //--------------------------------------------------------------------+
@@ -371,31 +383,6 @@
 #define CFG_TUH_VENDOR 0
 #endif
 
-//--------------------------------------------------------------------+
-// Port Specific
-// TUP stand for TinyUSB Port (can be renamed)
-//--------------------------------------------------------------------+
-
-//------------- Unaligned Memory -------------//
-
-// ARMv7+ (M3-M7, M23-M33) can access unaligned memory
-#if (defined(__ARM_ARCH) && (__ARM_ARCH >= 7))
-  #define TUP_ARCH_STRICT_ALIGN   0
-#else
-  #define TUP_ARCH_STRICT_ALIGN   1
-#endif
-
-// TUP_MCU_STRICT_ALIGN will overwrite TUP_ARCH_STRICT_ALIGN.
-// In case TUP_MCU_STRICT_ALIGN = 1 and TUP_ARCH_STRICT_ALIGN =0, we will not reply on compiler
-// to generate unaligned access code.
-// LPC_IP3511 Highspeed cannot access unaligned memory on USB_RAM
-#if TUD_OPT_HIGH_SPEED && (CFG_TUSB_MCU == OPT_MCU_LPC54XXX || CFG_TUSB_MCU == OPT_MCU_LPC55XX)
-  #define TUP_MCU_STRICT_ALIGN   1
-#else
-  #define TUP_MCU_STRICT_ALIGN   0
-#endif
-
-
 //------------------------------------------------------------------
 // Configuration Validation
 //------------------------------------------------------------------