added tud_suspended() and tud_ready()

examples/device/cdc_msc_hid/src/main.c

@@ -135,9 +135,16 @@ void usb_hid_task(void)
   if ( board_millis() < start_ms + interval_ms) return; // not enough time
   start_ms += interval_ms;
 
-#if 1
   uint32_t const btn = board_buttons();
 
+  if ( tud_suspended() && btn )
+  {
+    // Wake up host if we are in suspend mode
+    // and REMOTE_WAKEUP feature is enabled by host
+    tud_remote_wakeup();
+  }
+
+#if 0
   /*------------- Keyboard -------------*/
   if ( tud_hid_keyboard_ready() )
   {
@@ -157,8 +164,9 @@ void usb_hid_task(void)
       tud_hid_keyboard_keycode(0, NULL);
     }
   }
+#endif
 
-
+#if 0
   /*------------- Mouse -------------*/
   if ( tud_hid_mouse_ready() )
   {
@@ -211,7 +219,8 @@ void tud_umount_cb(void)
 }
 
 // Invoked when usb bus is suspended
-// USB specs: device can only draw up to 2.5 mA from bus
+// remote_wakeup_en : if host allow us  to perform remote wakeup
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
 void tud_suspend_cb(bool remote_wakeup_en)
 {
   (void) remote_wakeup_en;

hw/bsp/pca10056/board_pca10056.c

@@ -44,7 +44,7 @@
 
 uint8_t _button_pins[] = { 11, 12, 24, 25 };
 
-#define BOARD_BUTTON_COUNT  sizeof(_button_pins)
+#define BUTTON_COUNT  sizeof(_button_pins)
 
 
 /*------------------------------------------------------------------*/
@@ -84,7 +84,7 @@ void board_init(void)
   board_led_control(false);
 
   // Button
-  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++) nrf_gpio_cfg_input(_button_pins[i], NRF_GPIO_PIN_PULLUP);
+  for(uint8_t i=0; i<BUTTON_COUNT; i++) nrf_gpio_cfg_input(_button_pins[i], NRF_GPIO_PIN_PULLUP);
 
 #if CFG_TUSB_OS == OPT_OS_NONE
   // 1ms tick timer
@@ -138,10 +138,10 @@ uint32_t board_buttons(void)
 {
   uint32_t ret = 0;
 
-  for(uint8_t i=0; i<BOARD_BUTTON_COUNT; i++)
+  for(uint8_t i=0; i<BUTTON_COUNT; i++)
   {
     // button is active LOW
-    ret |= ( nrf_gpio_pin_read(_button_pins[i]) ? 0 : (1 << i));
+    ret |= (nrf_gpio_pin_read(_button_pins[i]) ? 0 : (1 << i));
   }
 
   return ret;

src/class/cdc/cdc_device.c

@@ -99,7 +99,7 @@ static void _prep_out_transaction (uint8_t itf)
 bool tud_cdc_n_connected(uint8_t itf)
 {
   // DTR (bit 0) active  is considered as connected
-  return tud_mounted() && TU_BIT_TEST(_cdcd_itf[itf].line_state, 0);
+  return tud_ready() && TU_BIT_TEST(_cdcd_itf[itf].line_state, 0);
 }
 
 uint8_t tud_cdc_n_get_line_state (uint8_t itf)

src/device/usbd.c

@@ -182,6 +182,11 @@ bool tud_mounted(void)
   return _usbd_dev.configured;
 }
 
+bool tud_suspended(void)
+{
+  return _usbd_dev.suspended;
+}
+
 bool tud_remote_wakeup(void)
 {
   // only wake up host if this feature is supported and enabled and we are suspended
@@ -627,6 +632,7 @@ void dcd_event_handler(dcd_event_t const * event, bool in_isr)
     case DCD_EVENT_UNPLUGGED:
       _usbd_dev.connected = 0;
       _usbd_dev.configured = 0;
+      _usbd_dev.suspended = 0;
       osal_queue_send(_usbd_q, event, in_isr);
     break;
 

src/device/usbd.h

@@ -66,6 +66,15 @@ void tud_task (void);
 // Check if device is connected and configured
 bool tud_mounted(void);
 
+// Check if device is suspended
+bool tud_suspended(void);
+
+// Check if device is ready to transfer
+static inline bool tud_ready(void)
+{
+  return tud_mounted() && !tud_suspended();
+}
+
 // Remote wake up host, only if suspended and enabled by host
 bool tud_remote_wakeup(void);
 
@@ -79,7 +88,8 @@ ATTR_WEAK void tud_mount_cb(void);
 // Invoked when device is unmounted
 ATTR_WEAK void tud_umount_cb(void);
 
-// Invoked when usb bus is suspended, max bus current draw is 2.5 mA
+// Invoked when usb bus is suspended
+// Within 7ms, device must draw an average of current less than 2.5 mA from bus
 ATTR_WEAK void tud_suspend_cb(bool remote_wakeup_en);
 
 // Invoked when usb bus is resumed

src/portable/nordic/nrf5x/dcd_nrf5x.c

@@ -219,6 +219,9 @@ void dcd_set_config (uint8_t rhport, uint8_t config_num)
 void dcd_remote_wakeup(uint8_t rhport)
 {
   (void) rhport;
+
+  NRF_USBD->DPDMVALUE = USBD_DPDMVALUE_STATE_Resume;
+  NRF_USBD->TASKS_DPDMDRIVE = 1;
 }
 
 //--------------------------------------------------------------------+
@@ -389,6 +392,8 @@ void USBD_IRQHandler(void)
     if ( evt_cause & USBD_EVENTCAUSE_SUSPEND_Msk )
     {
       dcd_event_bus_signal(0, DCD_EVENT_SUSPEND, true);
+
+
     }
 
     if ( evt_cause & USBD_EVENTCAUSE_RESUME_Msk  )