rt-thread/bsp/swm320/libraries/CMSIS/DeviceSupport/SWM320.h

#ifndef __SWM320_H__
#define __SWM320_H__

/*
 * ==========================================================================
 * ---------- Interrupt Number Definition -----------------------------------
 * ==========================================================================
 */
typedef enum IRQn
{
    /******  Cortex-M0 Processor Exceptions Numbers **********************************************/
    NonMaskableInt_IRQn = -14,   /*!< 2 Non Maskable Interrupt                        */
    MemoryManagement_IRQn = -12, /*!< 4 Cortex-M4 Memory Management Interrupt         */
    BusFault_IRQn = -11,         /*!< 5 Cortex-M4 Bus Fault Interrupt                 */
    UsageFault_IRQn = -10,       /*!< 6 Cortex-M4 Usage Fault Interrupt               */
    SVCall_IRQn = -5,            /*!< 11 Cortex-M4 SV Call Interrupt                  */
    DebugMonitor_IRQn = -4,      /*!< 12 Cortex-M4 Debug Monitor Interrupt            */
    PendSV_IRQn = -2,            /*!< 14 Cortex-M4 Pend SV Interrupt                  */
    SysTick_IRQn = -1,           /*!< 15 Cortex-M4 System Tick Interrupt              */

    /******  Cortex-M4 specific Interrupt Numbers ************************************************/
    GPIOA0_IRQn = 0,
    GPIOA1_IRQn = 1,
    GPIOA2_IRQn = 2,
    GPIOA3_IRQn = 3,
    GPIOA4_IRQn = 4,
    GPIOA5_IRQn = 5,
    GPIOA6_IRQn = 6,
    GPIOA7_IRQn = 7,
    GPIOB0_IRQn = 8,
    GPIOB1_IRQn = 9,
    GPIOB2_IRQn = 10,
    GPIOB3_IRQn = 11,
    GPIOB4_IRQn = 12,
    GPIOB5_IRQn = 13,
    GPIOB6_IRQn = 14,
    GPIOB7_IRQn = 15,
    GPIOC0_IRQn = 16,
    GPIOC1_IRQn = 17,
    GPIOC2_IRQn = 18,
    GPIOC3_IRQn = 19,
    GPIOC4_IRQn = 20,
    GPIOC5_IRQn = 21,
    GPIOC6_IRQn = 22,
    GPIOC7_IRQn = 23,
    GPIOM0_IRQn = 24,
    GPIOM1_IRQn = 25,
    GPIOM2_IRQn = 26,
    GPIOM3_IRQn = 27,
    GPIOM4_IRQn = 28,
    GPIOM5_IRQn = 29,
    GPIOM6_IRQn = 30,
    GPIOM7_IRQn = 31,
    DMA_IRQn = 32,
    LCD_IRQn = 33,
    NORFLC_IRQn = 34,
    CAN_IRQn = 35,
    PULSE_IRQn = 36,
    WDT_IRQn = 37,
    PWM_IRQn = 38,
    UART0_IRQn = 39,
    UART1_IRQn = 40,
    UART2_IRQn = 41,
    UART3_IRQn = 42,
    UART4_IRQn = 43,
    I2C0_IRQn = 44,
    I2C1_IRQn = 45,
    SPI0_IRQn = 46,
    ADC0_IRQn = 47,
    RTC_IRQn = 48,
    BOD_IRQn = 49,
    SDIO_IRQn = 50,
    GPIOA_IRQn = 51,
    GPIOB_IRQn = 52,
    GPIOC_IRQn = 53,
    GPIOM_IRQn = 54,
    GPION_IRQn = 55,
    GPIOP_IRQn = 56,
    ADC1_IRQn = 57,
    FPU_IRQn = 58,
    SPI1_IRQn = 59,
    TIMR0_IRQn = 60,
    TIMR1_IRQn = 61,
    TIMR2_IRQn = 62,
    TIMR3_IRQn = 63,
    TIMR4_IRQn = 64,
    TIMR5_IRQn = 65,
} IRQn_Type;

/*
 * ==========================================================================
 * ----------- Processor and Core Peripheral Section ------------------------
 * ==========================================================================
 */

/* Configuration of the Cortex-M0 Processor and Core Peripherals */
#define __CM4_REV 0x0001         /*!< Core revision r0p1                            */
#define __MPU_PRESENT 1          /*!< SWM320 provides an MPU                       */
#define __NVIC_PRIO_BITS 3       /*!< SWM320 uses 3 Bits for the Priority Levels   */
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used  */
#define __FPU_PRESENT 0          /*!< FPU present                                   */

#if defined(__CC_ARM)
#pragma anon_unions
#endif

#include <stdio.h>
#include "core_cm4.h" /* Cortex-M0 processor and core peripherals		     */
#include "system_SWM320.h"

/******************************************************************************/
/*				Device Specific Peripheral registers structures			 */
/******************************************************************************/
typedef struct
{
    __IO uint32_t CLKSEL; //Clock Select

    __IO uint32_t CLKDIV;

    __IO uint32_t CLKEN; //Clock Enable

    __IO uint32_t SLEEP;

    uint32_t RESERVED0[6];

    __IO uint32_t RTCBKP_ISO; //[0] 1 RTC备份电源域处于隔离状态    0 RTC备份电源域可访问

    __IO uint32_t RTCWKEN; //[0] 1 使能RTC唤醒功能

    uint32_t RESERVED[52 + 64];

    __IO uint32_t PAWKEN; //Port A Wakeup Enable
    __IO uint32_t PBWKEN;
    __IO uint32_t PCWKEN;

    uint32_t RESERVED2[1 + 4];

    __IO uint32_t PAWKSR; //Port A Wakeup Status Register，写1清零
    __IO uint32_t PBWKSR;
    __IO uint32_t PCWKSR;

    uint32_t RESERVED3[64 - 10];

    __IO uint32_t RSTCR; //Reset Control Register
    __IO uint32_t RSTSR; //Reset Status Register

    uint32_t RESERVED4[61 + 64];

    __IO uint32_t BKP[3]; //数据备份寄存器

    //RTC Power Domain: 0x4001E000
    uint32_t RESERVED5[(0x4001E000 - 0x40000508) / 4 - 1];

    __IO uint32_t RTCBKP[8]; //RTC电源域数据备份寄存器

    __IO uint32_t LRCCR;    //Low speed RC Control Register
    __IO uint32_t LRCTRIM0; //Low speed RC Trim
    __IO uint32_t LRCTRIM1;

    uint32_t RESERVED6;

    __IO uint32_t RTCLDOTRIM; //RTC Power Domain LDO Trim

    //Analog Control: 0x40031000
    uint32_t RESERVED7[(0x40031000 - 0x4001E030) / 4 - 1];

    __IO uint32_t HRCCR; //High speed RC Control Register

    uint32_t RESERVED8[7];

    __IO uint32_t XTALCR;

    __IO uint32_t PLLCR;
    __IO uint32_t PLLDIV;
    __IO uint32_t PLLSET;
    __IO uint32_t PLLLOCK; //[0] 1 PLL已锁定

    __IO uint32_t BODIE;
    __IO uint32_t BODIF;

    __IO uint32_t ADC1IN7;
} SYS_TypeDef;

#define SYS_CLKSEL_LFCK_Pos 0 //Low Frequency Clock Source	0 LRC	1 PLL
#define SYS_CLKSEL_LFCK_Msk (0x01 << SYS_CLKSEL_LFCK_Pos)
#define SYS_CLKSEL_HFCK_Pos 1 //High Frequency Clock Source	0 HRC	1 XTAL
#define SYS_CLKSEL_HFCK_Msk (0x01 << SYS_CLKSEL_HFCK_Pos)
#define SYS_CLKSEL_SYS_Pos 2 //系统时钟选择	0 LFCK	1 HFCK
#define SYS_CLKSEL_SYS_Msk (0x01 << SYS_CLKSEL_SYS_Pos)

#define SYS_CLKDIV_SYS_Pos 0 //系统时钟分频  0 1分频    1 2分频
#define SYS_CLKDIV_SYS_Msk (0x01 << SYS_CLKDIV_SYS_Pos)
#define SYS_CLKDIV_PWM_Pos 1 //PWM 时钟分频  0 1分频    1 8分频
#define SYS_CLKDIV_PWM_Msk (0x01 << SYS_CLKDIV_PWM_Pos)
#define SYS_CLKDIV_SDRAM_Pos 2 //SDRAM时钟分频 0 1分频    1 2分频    2 4分频
#define SYS_CLKDIV_SDRAM_Msk (0x03 << SYS_CLKDIV_SDRAM_Pos)
#define SYS_CLKDIV_SDIO_Pos 4 //SDIO时钟分频  0 1分频    1 2分频    2 4分频     3 8分频
#define SYS_CLKDIV_SDIO_Msk (0x03 << SYS_CLKDIV_SDIO_Pos)

#define SYS_CLKEN_GPIOA_Pos 0
#define SYS_CLKEN_GPIOA_Msk (0x01 << SYS_CLKEN_GPIOA_Pos)
#define SYS_CLKEN_GPIOB_Pos 1
#define SYS_CLKEN_GPIOB_Msk (0x01 << SYS_CLKEN_GPIOB_Pos)
#define SYS_CLKEN_GPIOC_Pos 2
#define SYS_CLKEN_GPIOC_Msk (0x01 << SYS_CLKEN_GPIOC_Pos)
#define SYS_CLKEN_GPIOM_Pos 4
#define SYS_CLKEN_GPIOM_Msk (0x01 << SYS_CLKEN_GPIOM_Pos)
#define SYS_CLKEN_GPION_Pos 5
#define SYS_CLKEN_GPION_Msk (0x01 << SYS_CLKEN_GPION_Pos)
#define SYS_CLKEN_TIMR_Pos 6
#define SYS_CLKEN_TIMR_Msk (0x01 << SYS_CLKEN_TIMR_Pos)
#define SYS_CLKEN_WDT_Pos 7
#define SYS_CLKEN_WDT_Msk (0x01 << SYS_CLKEN_WDT_Pos)
#define SYS_CLKEN_ADC0_Pos 8
#define SYS_CLKEN_ADC0_Msk (0x01 << SYS_CLKEN_ADC0_Pos)
#define SYS_CLKEN_PWM_Pos 9
#define SYS_CLKEN_PWM_Msk (0x01 << SYS_CLKEN_PWM_Pos)
#define SYS_CLKEN_RTC_Pos 10
#define SYS_CLKEN_RTC_Msk (0x01 << SYS_CLKEN_RTC_Pos)
#define SYS_CLKEN_UART0_Pos 11
#define SYS_CLKEN_UART0_Msk (0x01 << SYS_CLKEN_UART0_Pos)
#define SYS_CLKEN_UART1_Pos 12
#define SYS_CLKEN_UART1_Msk (0x01 << SYS_CLKEN_UART1_Pos)
#define SYS_CLKEN_UART2_Pos 13
#define SYS_CLKEN_UART2_Msk (0x01 << SYS_CLKEN_UART2_Pos)
#define SYS_CLKEN_UART3_Pos 14
#define SYS_CLKEN_UART3_Msk (0x01 << SYS_CLKEN_UART3_Pos)
#define SYS_CLKEN_UART4_Pos 15
#define SYS_CLKEN_UART4_Msk (0x01 << SYS_CLKEN_UART4_Pos)
#define SYS_CLKEN_SPI0_Pos 16
#define SYS_CLKEN_SPI0_Msk (0x01 << SYS_CLKEN_SPI0_Pos)
#define SYS_CLKEN_I2C0_Pos 17
#define SYS_CLKEN_I2C0_Msk (0x01 << SYS_CLKEN_I2C0_Pos)
#define SYS_CLKEN_I2C1_Pos 18
#define SYS_CLKEN_I2C1_Msk (0x01 << SYS_CLKEN_I2C1_Pos)
#define SYS_CLKEN_I2C2_Pos 19
#define SYS_CLKEN_I2C2_Msk (0x01 << SYS_CLKEN_I2C2_Pos)
#define SYS_CLKEN_LCD_Pos 20
#define SYS_CLKEN_LCD_Msk (0x01 << SYS_CLKEN_LCD_Pos)
#define SYS_CLKEN_GPIOP_Pos 21
#define SYS_CLKEN_GPIOP_Msk (0x01 << SYS_CLKEN_GPIOP_Pos)
#define SYS_CLKEN_ANAC_Pos 22 //模拟控制单元时钟使能
#define SYS_CLKEN_ANAC_Msk (0x01 << SYS_CLKEN_ANAC_Pos)
#define SYS_CLKEN_CRC_Pos 23
#define SYS_CLKEN_CRC_Msk (0x01 << SYS_CLKEN_CRC_Pos)
#define SYS_CLKEN_RTCBKP_Pos 24
#define SYS_CLKEN_RTCBKP_Msk (0x01 << SYS_CLKEN_RTCBKP_Pos)
#define SYS_CLKEN_CAN_Pos 25
#define SYS_CLKEN_CAN_Msk (0x01 << SYS_CLKEN_CAN_Pos)
#define SYS_CLKEN_SDRAM_Pos 26
#define SYS_CLKEN_SDRAM_Msk (0x01 << SYS_CLKEN_SDRAM_Pos)
#define SYS_CLKEN_NORFL_Pos 27 //NOR Flash
#define SYS_CLKEN_NORFL_Msk (0x01 << SYS_CLKEN_NORFL_Pos)
#define SYS_CLKEN_RAMC_Pos 28
#define SYS_CLKEN_RAMC_Msk (0x01 << SYS_CLKEN_RAMC_Pos)
#define SYS_CLKEN_SDIO_Pos 29
#define SYS_CLKEN_SDIO_Msk (0x01 << SYS_CLKEN_SDIO_Pos)
#define SYS_CLKEN_ADC1_Pos 30
#define SYS_CLKEN_ADC1_Msk (0x01 << SYS_CLKEN_ADC1_Pos)
#define SYS_CLKEN_ALIVE_Pos 31 //CHIPALIVE电源域系统时钟使能
#define SYS_CLKEN_ALIVE_Msk (0x01 << SYS_CLKEN_ALIVE_Pos)

#define SYS_SLEEP_SLEEP_Pos 0 //将该位置1后，系统将进入SLEEP模式
#define SYS_SLEEP_SLEEP_Msk (0x01 << SYS_SLEEP_SLEEP_Pos)
#define SYS_SLEEP_DEEP_Pos 1 //将该位置1后，系统将进入STOP SLEEP模式
#define SYS_SLEEP_DEEP_Msk (0x01 << SYS_SLEEP_DEEP_Pos)

#define SYS_RSTCR_SYS_Pos 0 //写1进行系统复位，硬件自动清零
#define SYS_RSTCR_SYS_Msk (0x01 << SYS_RSTCR_SYS_Pos)
#define SYS_RSTCR_FLASH_Pos 1 //写1对FLASH控制器进行一次复位，硬件自动清零
#define SYS_RSTCR_FLASH_Msk (0x01 << SYS_RSTCR_FLASH_Pos)
#define SYS_RSTCR_PWM_Pos 2 //写1对PWM进行一次复位，硬件自动清零
#define SYS_RSTCR_PWM_Msk (0x01 << SYS_RSTCR_PWM_Pos)
#define SYS_RSTCR_CPU_Pos 3 //写1对CPU进行一次复位，硬件自动清零
#define SYS_RSTCR_CPU_Msk (0x01 << SYS_RSTCR_CPU_Pos)
#define SYS_RSTCR_DMA_Pos 4 //写1对DMA进行一次复位，硬件自动清零
#define SYS_RSTCR_DMA_Msk (0x01 << SYS_RSTCR_DMA_Pos)
#define SYS_RSTCR_NORFLASH_Pos 5 //写1对NOR Flash控制器进行一次复位，硬件自动清零
#define SYS_RSTCR_NORFLASH_Msk (0x01 << SYS_RSTCR_NORFLASH_Pos)
#define SYS_RSTCR_SRAM_Pos 6 //写1对SRAM控制器进行一次复位，硬件自动清零
#define SYS_RSTCR_SRAM_Msk (0x01 << SYS_RSTCR_SRAM_Pos)
#define SYS_RSTCR_SDRAM_Pos 7 //写1对SDRAM控制器进行一次复位，硬件自动清零
#define SYS_RSTCR_SDRAM_Msk (0x01 << SYS_RSTCR_SDRAM_Pos)
#define SYS_RSTCR_SDIO_Pos 8 //写1对SDIO进行一次复位，硬件自动清零
#define SYS_RSTCR_SDIO_Msk (0x01 << SYS_RSTCR_SDIO_Pos)
#define SYS_RSTCR_LCD_Pos 9 //写1对LCD进行一次复位，硬件自动清零
#define SYS_RSTCR_LCD_Msk (0x01 << SYS_RSTCR_LCD_Pos)
#define SYS_RSTCR_CAN_Pos 10 //写1对CAN进行一次复位，硬件自动清零
#define SYS_RSTCR_CAN_Msk (0x01 << SYS_RSTCR_CAN_Pos)

#define SYS_RSTSR_POR_Pos 0 //1 出现过POR复位，写1清零
#define SYS_RSTSR_POR_Msk (0x01 << SYS_RSTSR_POR_Pos)
#define SYS_RSTSR_BOD_Pos 1 //1 出现过BOD复位，写1清零
#define SYS_RSTSR_BOD_Msk (0x01 << SYS_RSTSR_BOD_Pos)
#define SYS_RSTSR_PIN_Pos 2 //1 出现过外部引脚复位，写1清零
#define SYS_RSTSR_PIN_Msk (0x01 << SYS_RSTSR_PIN_Pos)
#define SYS_RSTSR_WDT_Pos 3 //1 出现过WDT复位，写1清零
#define SYS_RSTSR_WDT_Msk (0x01 << SYS_RSTSR_WDT_Pos)
#define SYS_RSTSR_SWRST_Pos 4 //Software Reset, 1 出现过软件复位，写1清零
#define SYS_RSTSR_SWRST_Msk (0x01 << SYS_RSTSR_SWRST_Pos)

#define SYS_LRCCR_OFF_Pos 0 //Low Speed RC Off
#define SYS_LRCCR_OFF_Msk (0x01 << SYS_LRCCR_OFF_Pos)

#define SYS_LRCTRIM0_R_Pos 0 //LRC粗调控制位
#define SYS_LRCTRIM0_R_Msk (0x7FFF << SYS_LRCTRIM0_R_Pos)
#define SYS_LRCTRIM0_M_Pos 15 //LRC中调控制位
#define SYS_LRCTRIM0_M_Msk (0x3F << SYS_LRCTRIM2_M_Pos)
#define SYS_LRCTRIM0_F_Pos 21 //LRC细调控制位
#define SYS_LRCTRIM0_F_Msk (0x7FF << SYS_LRCTRIM0_F_Pos)

#define SYS_LRCTRIM1_U_Pos 0 //LRC U调控制位
#define SYS_LRCTRIM1_U_Msk (0x7FFF << SYS_LRCTRIM1_U_Pos)

#define SYS_HRCCR_DBL_Pos 0 //Double Frequency	0 20MHz	1 40MHz
#define SYS_HRCCR_DBL_Msk (0x01 << SYS_HRCCR_DBL_Pos)
#define SYS_HRCCR_OFF_Pos 1 //High speed RC Off
#define SYS_HRCCR_OFF_Msk (0x01 << SYS_HRCCR_OFF_Pos)

#define SYS_XTALCR_EN_Pos 0
#define SYS_XTALCR_EN_Msk (0x01 << SYS_XTALCR_EN_Pos)

#define SYS_PLLCR_OUTEN_Pos 0 //只能LOCK后设置
#define SYS_PLLCR_OUTEN_Msk (0x01 << SYS_PLLCR_OUTEN_Pos)
#define SYS_PLLCR_INSEL_Pos 1 //0 XTAL    1 HRC
#define SYS_PLLCR_INSEL_Msk (0x01 << SYS_PLLCR_INSEL_Pos)
#define SYS_PLLCR_OFF_Pos 2
#define SYS_PLLCR_OFF_Msk (0x01 << SYS_PLLCR_OFF_Pos)

#define SYS_PLLDIV_FBDIV_Pos 0 //PLL FeedBack分频寄存器                           \
                               //VCO输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV \
                               //PLL输出频率 = PLL输入时钟 / INDIV * 4 * FBDIV / OUTDIV = VCO输出频率 / OUTDIV
#define SYS_PLLDIV_FBDIV_Msk (0x1FF << SYS_PLLDIV_FBDIV_Pos)
#define SYS_PLLDIV_ADDIV_Pos 9 //ADC时钟基（即VCO输出分频后的时钟）经ADDIV分频后作为ADC的转换时钟
#define SYS_PLLDIV_ADDIV_Msk (0x1F << SYS_PLLDIV_ADDIV_Pos)
#define SYS_PLLDIV_ADVCO_Pos 14 //0 VCO输出16分频作为ADC时钟基    1 VCO输出经过32分频作为ADC时钟基    2 VCO输出经过64分频作为ADC时钟基
#define SYS_PLLDIV_ADVCO_Msk (0x03 << SYS_PLLDIV_ADVCO_Pos)
#define SYS_PLLDIV_INDIV_Pos 16 //PLL 输入源时钟分频
#define SYS_PLLDIV_INDIV_Msk (0x1F << SYS_PLLDIV_INDIV_Pos)
#define SYS_PLLDIV_OUTDIV_Pos 24 //PLL 输出分频，0 8分频    1 4分频    0 2分频
#define SYS_PLLDIV_OUTDIV_Msk (0x03 << SYS_PLLDIV_OUTDIV_Pos)

#define SYS_PLLSET_LPFBW_Pos 0 //PLL Low Pass Filter Bandwidth
#define SYS_PLLSET_LPFBW_Msk (0x0F << SYS_PLLSET_LPFBW_Pos)
#define SYS_PLLSET_BIASADJ_Pos 4 //PLL Current Bias Adjustment
#define SYS_PLLSET_BIASADJ_Msk (0x03 << SYS_PLLSET_BIASADJ_Pos)
#define SYS_PLLSET_REFVSEL_Pos 6 //PLL Reference Voltage Select
#define SYS_PLLSET_REFVSEL_Msk (0x03 << SYS_PLLSET_REFVSEL_Pos)
#define SYS_PLLSET_CHPADJL_Pos 8 //PLL charge pump LSB current Adjustment
#define SYS_PLLSET_CHPADJL_Msk (0x07 << SYS_PLLSET_CHPADJL_Pos)
#define SYS_PLLSET_CHPADJM_Pos 11 //PLL charge pump MSB current Adjustment
#define SYS_PLLSET_CHPADJM_Msk (0x03 << SYS_PLLSET_CHPADJM_Pos)

#define SYS_BODIE_2V2_Pos 1 //BOD 2.2V等级触发中断使能
#define SYS_BODIE_2V2_Msk (0x01 << SYS_BODIE_2V2_Pos)

#define SYS_BODIF_2V2_Pos 1 //BOD 2.2V等级触发中断状态，写1清零
#define SYS_BODIF_2V2_Msk (0x01 << SYS_BODIF_2V2_Pos)

#define SYS_ADC1IN7_SEL_Pos 0 //ADC1模块模拟通道7，1 温度传感器    2 电池电压    3 RTC电源域BG    4 主电源域BG   5 PDM33
#define SYS_ADC1IN7_SEL_Msk (0x0F << SYS_ADC1IN7_SEL_Pos)
#define SYS_ADC1IN7_IOON_Pos 4 //ADC1模块模拟通道7所用IO开关
#define SYS_ADC1IN7_IOON_Msk (0x01 << SYS_ADC1IN7_IOON_Pos)

typedef struct
{
    __IO uint32_t PORTA_SEL; //给PORTA_SEL[2n+2:2n]赋相应的值，将PORTA.PINn引脚配置成GPIO、模拟、数字等功能
                             //当赋值为PORTA_PINn_FUNMUX时，PORTA.PINn引脚可通过PORTA_MUX寄存器连接到各种数字外设
    __IO uint32_t PORTB_SEL;

    __IO uint32_t PORTC_SEL;

    uint32_t RESERVED[5];

    __IO uint32_t PORTM_SEL0;

    __IO uint32_t PORTM_SEL1;

    uint32_t RESERVED2[2];

    __IO uint32_t PORTN_SEL0;

    __IO uint32_t PORTN_SEL1;

    uint32_t RESERVED3[2];

    __IO uint32_t PORTP_SEL0;

    __IO uint32_t PORTP_SEL1;

    uint32_t RESERVED4[46];

    __IO uint32_t PORTA_MUX0;

    __IO uint32_t PORTA_MUX1;

    uint32_t RESERVED5[2];

    __IO uint32_t PORTB_MUX0;

    __IO uint32_t PORTB_MUX1;

    uint32_t RESERVED6[2];

    __IO uint32_t PORTC_MUX0;

    __IO uint32_t PORTC_MUX1;

    uint32_t RESERVED7[14];

    __IO uint32_t PORTM_MUX0;

    __IO uint32_t PORTM_MUX1;

    __IO uint32_t PORTM_MUX2;

    __IO uint32_t PORTM_MUX3;

    __IO uint32_t PORTN_MUX0;

    __IO uint32_t PORTN_MUX1;

    __IO uint32_t PORTN_MUX2;

    uint32_t RESERVED8;

    __IO uint32_t PORTP_MUX0;

    __IO uint32_t PORTP_MUX1;

    __IO uint32_t PORTP_MUX2;

    __IO uint32_t PORTP_MUX3;

    uint32_t RESERVED9[28];

    __IO uint32_t PORTA_PULLU; //上拉使能

    uint32_t RESERVED10[3];

    __IO uint32_t PORTC_PULLU;

    uint32_t RESERVED11[3];

    __IO uint32_t PORTM_PULLU;

    uint32_t RESERVED12[3];

    __IO uint32_t PORTP_PULLU;

    uint32_t RESERVED13[51];

    __IO uint32_t PORTB_PULLD; //下拉使能

    uint32_t RESERVED14[3];

    __IO uint32_t PORTD_PULLD;

    uint32_t RESERVED15[3];

    __IO uint32_t PORTN_PULLD;

    uint32_t RESERVED16[135];

    __IO uint32_t PORTM_DRIVS; //驱动强度

    uint32_t RESERVED17[3];

    __IO uint32_t PORTN_DRIVS;

    uint32_t RESERVED18[3];

    __IO uint32_t PORTP_DRIVS;

    uint32_t RESERVED19[39];

    __IO uint32_t PORTA_INEN; //输入使能

    uint32_t RESERVED20[3];

    __IO uint32_t PORTB_INEN;

    uint32_t RESERVED21[3];

    __IO uint32_t PORTC_INEN;

    uint32_t RESERVED22[7];

    __IO uint32_t PORTM_INEN;

    uint32_t RESERVED23[3];

    __IO uint32_t PORTN_INEN;

    uint32_t RESERVED24[3];

    __IO uint32_t PORTP_INEN;
} PORT_TypeDef;

#define PORT_PORTA_PULLU_PIN0_Pos 0
#define PORT_PORTA_PULLU_PIN0_Msk (0x01 << PORT_PORTA_PULLU_PIN0_Pos)
#define PORT_PORTA_PULLU_PIN1_Pos 1
#define PORT_PORTA_PULLU_PIN1_Msk (0x01 << PORT_PORTA_PULLU_PIN1_Pos)
#define PORT_PORTA_PULLU_PIN2_Pos 2
#define PORT_PORTA_PULLU_PIN2_Msk (0x01 << PORT_PORTA_PULLU_PIN2_Pos)
#define PORT_PORTA_PULLU_PIN3_Pos 3
#define PORT_PORTA_PULLU_PIN3_Msk (0x01 << PORT_PORTA_PULLU_PIN3_Pos)
#define PORT_PORTA_PULLU_PIN4_Pos 4
#define PORT_PORTA_PULLU_PIN4_Msk (0x01 << PORT_PORTA_PULLU_PIN4_Pos)
#define PORT_PORTA_PULLU_PIN5_Pos 5
#define PORT_PORTA_PULLU_PIN5_Msk (0x01 << PORT_PORTA_PULLU_PIN5_Pos)
#define PORT_PORTA_PULLU_PIN6_Pos 6
#define PORT_PORTA_PULLU_PIN6_Msk (0x01 << PORT_PORTA_PULLU_PIN6_Pos)
#define PORT_PORTA_PULLU_PIN7_Pos 7
#define PORT_PORTA_PULLU_PIN7_Msk (0x01 << PORT_PORTA_PULLU_PIN7_Pos)
#define PORT_PORTA_PULLU_PIN8_Pos 8
#define PORT_PORTA_PULLU_PIN8_Msk (0x01 << PORT_PORTA_PULLU_PIN8_Pos)
#define PORT_PORTA_PULLU_PIN9_Pos 9
#define PORT_PORTA_PULLU_PIN9_Msk (0x01 << PORT_PORTA_PULLU_PIN9_Pos)
#define PORT_PORTA_PULLU_PIN10_Pos 10
#define PORT_PORTA_PULLU_PIN10_Msk (0x01 << PORT_PORTA_PULLU_PIN10_Pos)
#define PORT_PORTA_PULLU_PIN11_Pos 11
#define PORT_PORTA_PULLU_PIN11_Msk (0x01 << PORT_PORTA_PULLU_PIN11_Pos)
#define PORT_PORTA_PULLU_PIN12_Pos 12
#define PORT_PORTA_PULLU_PIN12_Msk (0x01 << PORT_PORTA_PULLU_PIN12_Pos)
#define PORT_PORTA_PULLU_PIN13_Pos 13
#define PORT_PORTA_PULLU_PIN13_Msk (0x01 << PORT_PORTA_PULLU_PIN13_Pos)
#define PORT_PORTA_PULLU_PIN14_Pos 14
#define PORT_PORTA_PULLU_PIN14_Msk (0x01 << PORT_PORTA_PULLU_PIN14_Pos)
#define PORT_PORTA_PULLU_PIN15_Pos 15
#define PORT_PORTA_PULLU_PIN15_Msk (0x01 << PORT_PORTA_PULLU_PIN15_Pos)

#define PORT_PORTC_PULLU_PIN0_Pos 0
#define PORT_PORTC_PULLU_PIN0_Msk (0x01 << PORT_PORTC_PULLU_PIN0_Pos)
#define PORT_PORTC_PULLU_PIN1_Pos 1
#define PORT_PORTC_PULLU_PIN1_Msk (0x01 << PORT_PORTC_PULLU_PIN1_Pos)
#define PORT_PORTC_PULLU_PIN2_Pos 2
#define PORT_PORTC_PULLU_PIN2_Msk (0x01 << PORT_PORTC_PULLU_PIN2_Pos)
#define PORT_PORTC_PULLU_PIN3_Pos 3
#define PORT_PORTC_PULLU_PIN3_Msk (0x01 << PORT_PORTC_PULLU_PIN3_Pos)
#define PORT_PORTC_PULLU_PIN4_Pos 4
#define PORT_PORTC_PULLU_PIN4_Msk (0x01 << PORT_PORTC_PULLU_PIN4_Pos)
#define PORT_PORTC_PULLU_PIN5_Pos 5
#define PORT_PORTC_PULLU_PIN5_Msk (0x01 << PORT_PORTC_PULLU_PIN5_Pos)
#define PORT_PORTC_PULLU_PIN6_Pos 6
#define PORT_PORTC_PULLU_PIN6_Msk (0x01 << PORT_PORTC_PULLU_PIN6_Pos)
#define PORT_PORTC_PULLU_PIN7_Pos 7
#define PORT_PORTC_PULLU_PIN7_Msk (0x01 << PORT_PORTC_PULLU_PIN7_Pos)
#define PORT_PORTC_PULLU_PIN8_Pos 8
#define PORT_PORTC_PULLU_PIN8_Msk (0x01 << PORT_PORTC_PULLU_PIN8_Pos)
#define PORT_PORTC_PULLU_PIN9_Pos 9
#define PORT_PORTC_PULLU_PIN9_Msk (0x01 << PORT_PORTC_PULLU_PIN9_Pos)
#define PORT_PORTC_PULLU_PIN10_Pos 10
#define PORT_PORTC_PULLU_PIN10_Msk (0x01 << PORT_PORTC_PULLU_PIN10_Pos)
#define PORT_PORTC_PULLU_PIN11_Pos 11
#define PORT_PORTC_PULLU_PIN11_Msk (0x01 << PORT_PORTC_PULLU_PIN11_Pos)
#define PORT_PORTC_PULLU_PIN12_Pos 12
#define PORT_PORTC_PULLU_PIN12_Msk (0x01 << PORT_PORTC_PULLU_PIN12_Pos)
#define PORT_PORTC_PULLU_PIN13_Pos 13
#define PORT_PORTC_PULLU_PIN13_Msk (0x01 << PORT_PORTC_PULLU_PIN13_Pos)
#define PORT_PORTC_PULLU_PIN14_Pos 14
#define PORT_PORTC_PULLU_PIN14_Msk (0x01 << PORT_PORTC_PULLU_PIN14_Pos)
#define PORT_PORTC_PULLU_PIN15_Pos 15
#define PORT_PORTC_PULLU_PIN15_Msk (0x01 << PORT_PORTC_PULLU_PIN15_Pos)

#define PORT_PORTM_PULLU_PIN0_Pos 0
#define PORT_PORTM_PULLU_PIN0_Msk (0x01 << PORT_PORTM_PULLU_PIN0_Pos)
#define PORT_PORTM_PULLU_PIN1_Pos 1
#define PORT_PORTM_PULLU_PIN1_Msk (0x01 << PORT_PORTM_PULLU_PIN1_Pos)
#define PORT_PORTM_PULLU_PIN2_Pos 2
#define PORT_PORTM_PULLU_PIN2_Msk (0x01 << PORT_PORTM_PULLU_PIN2_Pos)
#define PORT_PORTM_PULLU_PIN3_Pos 3
#define PORT_PORTM_PULLU_PIN3_Msk (0x01 << PORT_PORTM_PULLU_PIN3_Pos)
#define PORT_PORTM_PULLU_PIN4_Pos 4
#define PORT_PORTM_PULLU_PIN4_Msk (0x01 << PORT_PORTM_PULLU_PIN4_Pos)
#define PORT_PORTM_PULLU_PIN5_Pos 5
#define PORT_PORTM_PULLU_PIN5_Msk (0x01 << PORT_PORTM_PULLU_PIN5_Pos)
#define PORT_PORTM_PULLU_PIN6_Pos 6
#define PORT_PORTM_PULLU_PIN6_Msk (0x01 << PORT_PORTM_PULLU_PIN6_Pos)
#define PORT_PORTM_PULLU_PIN7_Pos 7
#define PORT_PORTM_PULLU_PIN7_Msk (0x01 << PORT_PORTM_PULLU_PIN7_Pos)
#define PORT_PORTM_PULLU_PIN8_Pos 8
#define PORT_PORTM_PULLU_PIN8_Msk (0x01 << PORT_PORTM_PULLU_PIN8_Pos)
#define PORT_PORTM_PULLU_PIN9_Pos 9
#define PORT_PORTM_PULLU_PIN9_Msk (0x01 << PORT_PORTM_PULLU_PIN9_Pos)
#define PORT_PORTM_PULLU_PIN10_Pos 10
#define PORT_PORTM_PULLU_PIN10_Msk (0x01 << PORT_PORTM_PULLU_PIN10_Pos)
#define PORT_PORTM_PULLU_PIN11_Pos 11
#define PORT_PORTM_PULLU_PIN11_Msk (0x01 << PORT_PORTM_PULLU_PIN11_Pos)
#define PORT_PORTM_PULLU_PIN12_Pos 12
#define PORT_PORTM_PULLU_PIN12_Msk (0x01 << PORT_PORTM_PULLU_PIN12_Pos)
#define PORT_PORTM_PULLU_PIN13_Pos 13
#define PORT_PORTM_PULLU_PIN13_Msk (0x01 << PORT_PORTM_PULLU_PIN13_Pos)
#define PORT_PORTM_PULLU_PIN14_Pos 14
#define PORT_PORTM_PULLU_PIN14_Msk (0x01 << PORT_PORTM_PULLU_PIN14_Pos)
#define PORT_PORTM_PULLU_PIN15_Pos 15
#define PORT_PORTM_PULLU_PIN15_Msk (0x01 << PORT_PORTM_PULLU_PIN15_Pos)
#define PORT_PORTM_PULLU_PIN16_Pos 16
#define PORT_PORTM_PULLU_PIN16_Msk (0x01 << PORT_PORTM_PULLU_PIN16_Pos)
#define PORT_PORTM_PULLU_PIN17_Pos 17
#define PORT_PORTM_PULLU_PIN17_Msk (0x01 << PORT_PORTM_PULLU_PIN17_Pos)
#define PORT_PORTM_PULLU_PIN18_Pos 18
#define PORT_PORTM_PULLU_PIN18_Msk (0x01 << PORT_PORTM_PULLU_PIN18_Pos)
#define PORT_PORTM_PULLU_PIN19_Pos 19
#define PORT_PORTM_PULLU_PIN19_Msk (0x01 << PORT_PORTM_PULLU_PIN19_Pos)
#define PORT_PORTM_PULLU_PIN20_Pos 20
#define PORT_PORTM_PULLU_PIN20_Msk (0x01 << PORT_PORTM_PULLU_PIN20_Pos)
#define PORT_PORTM_PULLU_PIN21_Pos 21
#define PORT_PORTM_PULLU_PIN21_Msk (0x01 << PORT_PORTM_PULLU_PIN21_Pos)
#define PORT_PORTM_PULLU_PIN22_Pos 22
#define PORT_PORTM_PULLU_PIN22_Msk (0x01 << PORT_PORTM_PULLU_PIN22_Pos)
#define PORT_PORTM_PULLU_PIN23_Pos 23
#define PORT_PORTM_PULLU_PIN23_Msk (0x01 << PORT_PORTM_PULLU_PIN23_Pos)

#define PORT_PORTP_PULLU_PIN0_Pos 0
#define PORT_PORTP_PULLU_PIN0_Msk (0x01 << PORT_PORTP_PULLU_PIN0_Pos)
#define PORT_PORTP_PULLU_PIN1_Pos 1
#define PORT_PORTP_PULLU_PIN1_Msk (0x01 << PORT_PORTP_PULLU_PIN1_Pos)
#define PORT_PORTP_PULLU_PIN2_Pos 2
#define PORT_PORTP_PULLU_PIN2_Msk (0x01 << PORT_PORTP_PULLU_PIN2_Pos)
#define PORT_PORTP_PULLU_PIN3_Pos 3
#define PORT_PORTP_PULLU_PIN3_Msk (0x01 << PORT_PORTP_PULLU_PIN3_Pos)
#define PORT_PORTP_PULLU_PIN4_Pos 4
#define PORT_PORTP_PULLU_PIN4_Msk (0x01 << PORT_PORTP_PULLU_PIN4_Pos)
#define PORT_PORTP_PULLU_PIN5_Pos 5
#define PORT_PORTP_PULLU_PIN5_Msk (0x01 << PORT_PORTP_PULLU_PIN5_Pos)
#define PORT_PORTP_PULLU_PIN6_Pos 6
#define PORT_PORTP_PULLU_PIN6_Msk (0x01 << PORT_PORTP_PULLU_PIN6_Pos)
#define PORT_PORTP_PULLU_PIN7_Pos 7
#define PORT_PORTP_PULLU_PIN7_Msk (0x01 << PORT_PORTP_PULLU_PIN7_Pos)
#define PORT_PORTP_PULLU_PIN8_Pos 8
#define PORT_PORTP_PULLU_PIN8_Msk (0x01 << PORT_PORTP_PULLU_PIN8_Pos)
#define PORT_PORTP_PULLU_PIN9_Pos 9
#define PORT_PORTP_PULLU_PIN9_Msk (0x01 << PORT_PORTP_PULLU_PIN9_Pos)
#define PORT_PORTP_PULLU_PIN10_Pos 10
#define PORT_PORTP_PULLU_PIN10_Msk (0x01 << PORT_PORTP_PULLU_PIN10_Pos)
#define PORT_PORTP_PULLU_PIN11_Pos 11
#define PORT_PORTP_PULLU_PIN11_Msk (0x01 << PORT_PORTP_PULLU_PIN11_Pos)
#define PORT_PORTP_PULLU_PIN12_Pos 12
#define PORT_PORTP_PULLU_PIN12_Msk (0x01 << PORT_PORTP_PULLU_PIN12_Pos)
#define PORT_PORTP_PULLU_PIN13_Pos 13
#define PORT_PORTP_PULLU_PIN13_Msk (0x01 << PORT_PORTP_PULLU_PIN13_Pos)
#define PORT_PORTP_PULLU_PIN14_Pos 14
#define PORT_PORTP_PULLU_PIN14_Msk (0x01 << PORT_PORTP_PULLU_PIN14_Pos)
#define PORT_PORTP_PULLU_PIN15_Pos 15
#define PORT_PORTP_PULLU_PIN15_Msk (0x01 << PORT_PORTP_PULLU_PIN15_Pos)
#define PORT_PORTP_PULLU_PIN16_Pos 16
#define PORT_PORTP_PULLU_PIN16_Msk (0x01 << PORT_PORTP_PULLU_PIN16_Pos)
#define PORT_PORTP_PULLU_PIN17_Pos 17
#define PORT_PORTP_PULLU_PIN17_Msk (0x01 << PORT_PORTP_PULLU_PIN17_Pos)
#define PORT_PORTP_PULLU_PIN18_Pos 18
#define PORT_PORTP_PULLU_PIN18_Msk (0x01 << PORT_PORTP_PULLU_PIN18_Pos)
#define PORT_PORTP_PULLU_PIN19_Pos 19
#define PORT_PORTP_PULLU_PIN19_Msk (0x01 << PORT_PORTP_PULLU_PIN19_Pos)
#define PORT_PORTP_PULLU_PIN20_Pos 20
#define PORT_PORTP_PULLU_PIN20_Msk (0x01 << PORT_PORTP_PULLU_PIN20_Pos)
#define PORT_PORTP_PULLU_PIN21_Pos 21
#define PORT_PORTP_PULLU_PIN21_Msk (0x01 << PORT_PORTP_PULLU_PIN21_Pos)
#define PORT_PORTP_PULLU_PIN22_Pos 22
#define PORT_PORTP_PULLU_PIN22_Msk (0x01 << PORT_PORTP_PULLU_PIN22_Pos)
#define PORT_PORTP_PULLU_PIN23_Pos 23
#define PORT_PORTP_PULLU_PIN23_Msk (0x01 << PORT_PORTP_PULLU_PIN23_Pos)

#define PORT_PORTB_PULLD_PIN0_Pos 0
#define PORT_PORTB_PULLD_PIN0_Msk (0x01 << PORT_PORTB_PULLD_PIN0_Pos)
#define PORT_PORTB_PULLD_PIN1_Pos 1
#define PORT_PORTB_PULLD_PIN1_Msk (0x01 << PORT_PORTB_PULLD_PIN1_Pos)
#define PORT_PORTB_PULLD_PIN2_Pos 2
#define PORT_PORTB_PULLD_PIN2_Msk (0x01 << PORT_PORTB_PULLD_PIN2_Pos)
#define PORT_PORTB_PULLD_PIN3_Pos 3
#define PORT_PORTB_PULLD_PIN3_Msk (0x01 << PORT_PORTB_PULLD_PIN3_Pos)
#define PORT_PORTB_PULLD_PIN4_Pos 4
#define PORT_PORTB_PULLD_PIN4_Msk (0x01 << PORT_PORTB_PULLD_PIN4_Pos)
#define PORT_PORTB_PULLD_PIN5_Pos 5
#define PORT_PORTB_PULLD_PIN5_Msk (0x01 << PORT_PORTB_PULLD_PIN5_Pos)
#define PORT_PORTB_PULLD_PIN6_Pos 6
#define PORT_PORTB_PULLD_PIN6_Msk (0x01 << PORT_PORTB_PULLD_PIN6_Pos)
#define PORT_PORTB_PULLD_PIN7_Pos 7
#define PORT_PORTB_PULLD_PIN7_Msk (0x01 << PORT_PORTB_PULLD_PIN7_Pos)
#define PORT_PORTB_PULLD_PIN8_Pos 8
#define PORT_PORTB_PULLD_PIN8_Msk (0x01 << PORT_PORTB_PULLD_PIN8_Pos)
#define PORT_PORTB_PULLD_PIN9_Pos 9
#define PORT_PORTB_PULLD_PIN9_Msk (0x01 << PORT_PORTB_PULLD_PIN9_Pos)
#define PORT_PORTB_PULLD_PIN10_Pos 10
#define PORT_PORTB_PULLD_PIN10_Msk (0x01 << PORT_PORTB_PULLD_PIN10_Pos)
#define PORT_PORTB_PULLD_PIN11_Pos 11
#define PORT_PORTB_PULLD_PIN11_Msk (0x01 << PORT_PORTB_PULLD_PIN11_Pos)
#define PORT_PORTB_PULLD_PIN12_Pos 12
#define PORT_PORTB_PULLD_PIN12_Msk (0x01 << PORT_PORTB_PULLD_PIN12_Pos)
#define PORT_PORTB_PULLD_PIN13_Pos 13
#define PORT_PORTB_PULLD_PIN13_Msk (0x01 << PORT_PORTB_PULLD_PIN13_Pos)
#define PORT_PORTB_PULLD_PIN14_Pos 14
#define PORT_PORTB_PULLD_PIN14_Msk (0x01 << PORT_PORTB_PULLD_PIN14_Pos)
#define PORT_PORTB_PULLD_PIN15_Pos 15
#define PORT_PORTB_PULLD_PIN15_Msk (0x01 << PORT_PORTB_PULLD_PIN15_Pos)

#define PORT_PORTN_PULLD_PIN0_Pos 0
#define PORT_PORTN_PULLD_PIN0_Msk (0x01 << PORT_PORTN_PULLD_PIN0_Pos)
#define PORT_PORTN_PULLD_PIN1_Pos 1
#define PORT_PORTN_PULLD_PIN1_Msk (0x01 << PORT_PORTN_PULLD_PIN1_Pos)
#define PORT_PORTN_PULLD_PIN2_Pos 2
#define PORT_PORTN_PULLD_PIN2_Msk (0x01 << PORT_PORTN_PULLD_PIN2_Pos)
#define PORT_PORTN_PULLD_PIN3_Pos 3
#define PORT_PORTN_PULLD_PIN3_Msk (0x01 << PORT_PORTN_PULLD_PIN3_Pos)
#define PORT_PORTN_PULLD_PIN4_Pos 4
#define PORT_PORTN_PULLD_PIN4_Msk (0x01 << PORT_PORTN_PULLD_PIN4_Pos)
#define PORT_PORTN_PULLD_PIN5_Pos 5
#define PORT_PORTN_PULLD_PIN5_Msk (0x01 << PORT_PORTN_PULLD_PIN5_Pos)
#define PORT_PORTN_PULLD_PIN6_Pos 6
#define PORT_PORTN_PULLD_PIN6_Msk (0x01 << PORT_PORTN_PULLD_PIN6_Pos)
#define PORT_PORTN_PULLD_PIN7_Pos 7
#define PORT_PORTN_PULLD_PIN7_Msk (0x01 << PORT_PORTN_PULLD_PIN7_Pos)
#define PORT_PORTN_PULLD_PIN8_Pos 8
#define PORT_PORTN_PULLD_PIN8_Msk (0x01 << PORT_PORTN_PULLD_PIN8_Pos)
#define PORT_PORTN_PULLD_PIN9_Pos 9
#define PORT_PORTN_PULLD_PIN9_Msk (0x01 << PORT_PORTN_PULLD_PIN9_Pos)
#define PORT_PORTN_PULLD_PIN10_Pos 10
#define PORT_PORTN_PULLD_PIN10_Msk (0x01 << PORT_PORTN_PULLD_PIN10_Pos)
#define PORT_PORTN_PULLD_PIN11_Pos 11
#define PORT_PORTN_PULLD_PIN11_Msk (0x01 << PORT_PORTN_PULLD_PIN11_Pos)
#define PORT_PORTN_PULLD_PIN12_Pos 12
#define PORT_PORTN_PULLD_PIN12_Msk (0x01 << PORT_PORTN_PULLD_PIN12_Pos)
#define PORT_PORTN_PULLD_PIN13_Pos 13
#define PORT_PORTN_PULLD_PIN13_Msk (0x01 << PORT_PORTN_PULLD_PIN13_Pos)
#define PORT_PORTN_PULLD_PIN14_Pos 14
#define PORT_PORTN_PULLD_PIN14_Msk (0x01 << PORT_PORTN_PULLD_PIN14_Pos)
#define PORT_PORTN_PULLD_PIN15_Pos 15
#define PORT_PORTN_PULLD_PIN15_Msk (0x01 << PORT_PORTN_PULLD_PIN15_Pos)
#define PORT_PORTN_PULLD_PIN16_Pos 16
#define PORT_PORTN_PULLD_PIN16_Msk (0x01 << PORT_PORTN_PULLD_PIN16_Pos)
#define PORT_PORTN_PULLD_PIN17_Pos 17
#define PORT_PORTN_PULLD_PIN17_Msk (0x01 << PORT_PORTN_PULLD_PIN17_Pos)
#define PORT_PORTN_PULLD_PIN18_Pos 18
#define PORT_PORTN_PULLD_PIN18_Msk (0x01 << PORT_PORTN_PULLD_PIN18_Pos)
#define PORT_PORTN_PULLD_PIN19_Pos 19
#define PORT_PORTN_PULLD_PIN19_Msk (0x01 << PORT_PORTN_PULLD_PIN19_Pos)
#define PORT_PORTN_PULLD_PIN20_Pos 20
#define PORT_PORTN_PULLD_PIN20_Msk (0x01 << PORT_PORTN_PULLD_PIN20_Pos)
#define PORT_PORTN_PULLD_PIN21_Pos 21
#define PORT_PORTN_PULLD_PIN21_Msk (0x01 << PORT_PORTN_PULLD_PIN21_Pos)
#define PORT_PORTN_PULLD_PIN22_Pos 22
#define PORT_PORTN_PULLD_PIN22_Msk (0x01 << PORT_PORTN_PULLD_PIN22_Pos)
#define PORT_PORTN_PULLD_PIN23_Pos 23
#define PORT_PORTN_PULLD_PIN23_Msk (0x01 << PORT_PORTN_PULLD_PIN23_Pos)

#define PORT_PORTM_DRIVS_PIN0_Pos 0
#define PORT_PORTM_DRIVS_PIN0_Msk (0x01 << PORT_PORTM_DRIVS_PIN0_Pos)
#define PORT_PORTM_DRIVS_PIN1_Pos 1
#define PORT_PORTM_DRIVS_PIN1_Msk (0x01 << PORT_PORTM_DRIVS_PIN1_Pos)
#define PORT_PORTM_DRIVS_PIN2_Pos 2
#define PORT_PORTM_DRIVS_PIN2_Msk (0x01 << PORT_PORTM_DRIVS_PIN2_Pos)
#define PORT_PORTM_DRIVS_PIN3_Pos 3
#define PORT_PORTM_DRIVS_PIN3_Msk (0x01 << PORT_PORTM_DRIVS_PIN3_Pos)
#define PORT_PORTM_DRIVS_PIN4_Pos 4
#define PORT_PORTM_DRIVS_PIN4_Msk (0x01 << PORT_PORTM_DRIVS_PIN4_Pos)
#define PORT_PORTM_DRIVS_PIN5_Pos 5
#define PORT_PORTM_DRIVS_PIN5_Msk (0x01 << PORT_PORTM_DRIVS_PIN5_Pos)
#define PORT_PORTM_DRIVS_PIN6_Pos 6
#define PORT_PORTM_DRIVS_PIN6_Msk (0x01 << PORT_PORTM_DRIVS_PIN6_Pos)
#define PORT_PORTM_DRIVS_PIN7_Pos 7
#define PORT_PORTM_DRIVS_PIN7_Msk (0x01 << PORT_PORTM_DRIVS_PIN7_Pos)
#define PORT_PORTM_DRIVS_PIN8_Pos 8
#define PORT_PORTM_DRIVS_PIN8_Msk (0x01 << PORT_PORTM_DRIVS_PIN8_Pos)
#define PORT_PORTM_DRIVS_PIN9_Pos 9
#define PORT_PORTM_DRIVS_PIN9_Msk (0x01 << PORT_PORTM_DRIVS_PIN9_Pos)
#define PORT_PORTM_DRIVS_PIN10_Pos 10
#define PORT_PORTM_DRIVS_PIN10_Msk (0x01 << PORT_PORTM_DRIVS_PIN10_Pos)
#define PORT_PORTM_DRIVS_PIN11_Pos 11
#define PORT_PORTM_DRIVS_PIN11_Msk (0x01 << PORT_PORTM_DRIVS_PIN11_Pos)
#define PORT_PORTM_DRIVS_PIN12_Pos 12
#define PORT_PORTM_DRIVS_PIN12_Msk (0x01 << PORT_PORTM_DRIVS_PIN12_Pos)
#define PORT_PORTM_DRIVS_PIN13_Pos 13
#define PORT_PORTM_DRIVS_PIN13_Msk (0x01 << PORT_PORTM_DRIVS_PIN13_Pos)
#define PORT_PORTM_DRIVS_PIN14_Pos 14
#define PORT_PORTM_DRIVS_PIN14_Msk (0x01 << PORT_PORTM_DRIVS_PIN14_Pos)
#define PORT_PORTM_DRIVS_PIN15_Pos 15
#define PORT_PORTM_DRIVS_PIN15_Msk (0x01 << PORT_PORTM_DRIVS_PIN15_Pos)
#define PORT_PORTM_DRIVS_PIN16_Pos 16
#define PORT_PORTM_DRIVS_PIN16_Msk (0x01 << PORT_PORTM_DRIVS_PIN16_Pos)
#define PORT_PORTM_DRIVS_PIN17_Pos 17
#define PORT_PORTM_DRIVS_PIN17_Msk (0x01 << PORT_PORTM_DRIVS_PIN17_Pos)
#define PORT_PORTM_DRIVS_PIN18_Pos 18
#define PORT_PORTM_DRIVS_PIN18_Msk (0x01 << PORT_PORTM_DRIVS_PIN18_Pos)
#define PORT_PORTM_DRIVS_PIN19_Pos 19
#define PORT_PORTM_DRIVS_PIN19_Msk (0x01 << PORT_PORTM_DRIVS_PIN19_Pos)
#define PORT_PORTM_DRIVS_PIN20_Pos 20
#define PORT_PORTM_DRIVS_PIN20_Msk (0x01 << PORT_PORTM_DRIVS_PIN20_Pos)
#define PORT_PORTM_DRIVS_PIN21_Pos 21
#define PORT_PORTM_DRIVS_PIN21_Msk (0x01 << PORT_PORTM_DRIVS_PIN21_Pos)
#define PORT_PORTM_DRIVS_PIN22_Pos 22
#define PORT_PORTM_DRIVS_PIN22_Msk (0x01 << PORT_PORTM_DRIVS_PIN22_Pos)
#define PORT_PORTM_DRIVS_PIN23_Pos 23
#define PORT_PORTM_DRIVS_PIN23_Msk (0x01 << PORT_PORTM_DRIVS_PIN23_Pos)

#define PORT_PORTN_DRIVS_PIN0_Pos 0
#define PORT_PORTN_DRIVS_PIN0_Msk (0x01 << PORT_PORTN_DRIVS_PIN0_Pos)
#define PORT_PORTN_DRIVS_PIN1_Pos 1
#define PORT_PORTN_DRIVS_PIN1_Msk (0x01 << PORT_PORTN_DRIVS_PIN1_Pos)
#define PORT_PORTN_DRIVS_PIN2_Pos 2
#define PORT_PORTN_DRIVS_PIN2_Msk (0x01 << PORT_PORTN_DRIVS_PIN2_Pos)
#define PORT_PORTN_DRIVS_PIN3_Pos 3
#define PORT_PORTN_DRIVS_PIN3_Msk (0x01 << PORT_PORTN_DRIVS_PIN3_Pos)
#define PORT_PORTN_DRIVS_PIN4_Pos 4
#define PORT_PORTN_DRIVS_PIN4_Msk (0x01 << PORT_PORTN_DRIVS_PIN4_Pos)
#define PORT_PORTN_DRIVS_PIN5_Pos 5
#define PORT_PORTN_DRIVS_PIN5_Msk (0x01 << PORT_PORTN_DRIVS_PIN5_Pos)
#define PORT_PORTN_DRIVS_PIN6_Pos 6
#define PORT_PORTN_DRIVS_PIN6_Msk (0x01 << PORT_PORTN_DRIVS_PIN6_Pos)
#define PORT_PORTN_DRIVS_PIN7_Pos 7
#define PORT_PORTN_DRIVS_PIN7_Msk (0x01 << PORT_PORTN_DRIVS_PIN7_Pos)
#define PORT_PORTN_DRIVS_PIN8_Pos 8
#define PORT_PORTN_DRIVS_PIN8_Msk (0x01 << PORT_PORTN_DRIVS_PIN8_Pos)
#define PORT_PORTN_DRIVS_PIN9_Pos 9
#define PORT_PORTN_DRIVS_PIN9_Msk (0x01 << PORT_PORTN_DRIVS_PIN9_Pos)
#define PORT_PORTN_DRIVS_PIN10_Pos 10
#define PORT_PORTN_DRIVS_PIN10_Msk (0x01 << PORT_PORTN_DRIVS_PIN10_Pos)
#define PORT_PORTN_DRIVS_PIN11_Pos 11
#define PORT_PORTN_DRIVS_PIN11_Msk (0x01 << PORT_PORTN_DRIVS_PIN11_Pos)
#define PORT_PORTN_DRIVS_PIN12_Pos 12
#define PORT_PORTN_DRIVS_PIN12_Msk (0x01 << PORT_PORTN_DRIVS_PIN12_Pos)
#define PORT_PORTN_DRIVS_PIN13_Pos 13
#define PORT_PORTN_DRIVS_PIN13_Msk (0x01 << PORT_PORTN_DRIVS_PIN13_Pos)
#define PORT_PORTN_DRIVS_PIN14_Pos 14
#define PORT_PORTN_DRIVS_PIN14_Msk (0x01 << PORT_PORTN_DRIVS_PIN14_Pos)
#define PORT_PORTN_DRIVS_PIN15_Pos 15
#define PORT_PORTN_DRIVS_PIN15_Msk (0x01 << PORT_PORTN_DRIVS_PIN15_Pos)
#define PORT_PORTN_DRIVS_PIN16_Pos 16
#define PORT_PORTN_DRIVS_PIN16_Msk (0x01 << PORT_PORTN_DRIVS_PIN16_Pos)
#define PORT_PORTN_DRIVS_PIN17_Pos 17
#define PORT_PORTN_DRIVS_PIN17_Msk (0x01 << PORT_PORTN_DRIVS_PIN17_Pos)
#define PORT_PORTN_DRIVS_PIN18_Pos 18
#define PORT_PORTN_DRIVS_PIN18_Msk (0x01 << PORT_PORTN_DRIVS_PIN18_Pos)
#define PORT_PORTN_DRIVS_PIN19_Pos 19
#define PORT_PORTN_DRIVS_PIN19_Msk (0x01 << PORT_PORTN_DRIVS_PIN19_Pos)
#define PORT_PORTN_DRIVS_PIN20_Pos 20
#define PORT_PORTN_DRIVS_PIN20_Msk (0x01 << PORT_PORTN_DRIVS_PIN20_Pos)
#define PORT_PORTN_DRIVS_PIN21_Pos 21
#define PORT_PORTN_DRIVS_PIN21_Msk (0x01 << PORT_PORTN_DRIVS_PIN21_Pos)
#define PORT_PORTN_DRIVS_PIN22_Pos 22
#define PORT_PORTN_DRIVS_PIN22_Msk (0x01 << PORT_PORTN_DRIVS_PIN22_Pos)
#define PORT_PORTN_DRIVS_PIN23_Pos 23
#define PORT_PORTN_DRIVS_PIN23_Msk (0x01 << PORT_PORTN_DRIVS_PIN23_Pos)

#define PORT_PORTP_DRIVS_PIN0_Pos 0
#define PORT_PORTP_DRIVS_PIN0_Msk (0x01 << PORT_PORTP_DRIVS_PIN0_Pos)
#define PORT_PORTP_DRIVS_PIN1_Pos 1
#define PORT_PORTP_DRIVS_PIN1_Msk (0x01 << PORT_PORTP_DRIVS_PIN1_Pos)
#define PORT_PORTP_DRIVS_PIN2_Pos 2
#define PORT_PORTP_DRIVS_PIN2_Msk (0x01 << PORT_PORTP_DRIVS_PIN2_Pos)
#define PORT_PORTP_DRIVS_PIN3_Pos 3
#define PORT_PORTP_DRIVS_PIN3_Msk (0x01 << PORT_PORTP_DRIVS_PIN3_Pos)
#define PORT_PORTP_DRIVS_PIN4_Pos 4
#define PORT_PORTP_DRIVS_PIN4_Msk (0x01 << PORT_PORTP_DRIVS_PIN4_Pos)
#define PORT_PORTP_DRIVS_PIN5_Pos 5
#define PORT_PORTP_DRIVS_PIN5_Msk (0x01 << PORT_PORTP_DRIVS_PIN5_Pos)
#define PORT_PORTP_DRIVS_PIN6_Pos 6
#define PORT_PORTP_DRIVS_PIN6_Msk (0x01 << PORT_PORTP_DRIVS_PIN6_Pos)
#define PORT_PORTP_DRIVS_PIN7_Pos 7
#define PORT_PORTP_DRIVS_PIN7_Msk (0x01 << PORT_PORTP_DRIVS_PIN7_Pos)
#define PORT_PORTP_DRIVS_PIN8_Pos 8
#define PORT_PORTP_DRIVS_PIN8_Msk (0x01 << PORT_PORTP_DRIVS_PIN8_Pos)
#define PORT_PORTP_DRIVS_PIN9_Pos 9
#define PORT_PORTP_DRIVS_PIN9_Msk (0x01 << PORT_PORTP_DRIVS_PIN9_Pos)
#define PORT_PORTP_DRIVS_PIN10_Pos 10
#define PORT_PORTP_DRIVS_PIN10_Msk (0x01 << PORT_PORTP_DRIVS_PIN10_Pos)
#define PORT_PORTP_DRIVS_PIN11_Pos 11
#define PORT_PORTP_DRIVS_PIN11_Msk (0x01 << PORT_PORTP_DRIVS_PIN11_Pos)
#define PORT_PORTP_DRIVS_PIN12_Pos 12
#define PORT_PORTP_DRIVS_PIN12_Msk (0x01 << PORT_PORTP_DRIVS_PIN12_Pos)
#define PORT_PORTP_DRIVS_PIN13_Pos 13
#define PORT_PORTP_DRIVS_PIN13_Msk (0x01 << PORT_PORTP_DRIVS_PIN13_Pos)
#define PORT_PORTP_DRIVS_PIN14_Pos 14
#define PORT_PORTP_DRIVS_PIN14_Msk (0x01 << PORT_PORTP_DRIVS_PIN14_Pos)
#define PORT_PORTP_DRIVS_PIN15_Pos 15
#define PORT_PORTP_DRIVS_PIN15_Msk (0x01 << PORT_PORTP_DRIVS_PIN15_Pos)
#define PORT_PORTP_DRIVS_PIN16_Pos 16
#define PORT_PORTP_DRIVS_PIN16_Msk (0x01 << PORT_PORTP_DRIVS_PIN16_Pos)
#define PORT_PORTP_DRIVS_PIN17_Pos 17
#define PORT_PORTP_DRIVS_PIN17_Msk (0x01 << PORT_PORTP_DRIVS_PIN17_Pos)
#define PORT_PORTP_DRIVS_PIN18_Pos 18
#define PORT_PORTP_DRIVS_PIN18_Msk (0x01 << PORT_PORTP_DRIVS_PIN18_Pos)
#define PORT_PORTP_DRIVS_PIN19_Pos 19
#define PORT_PORTP_DRIVS_PIN19_Msk (0x01 << PORT_PORTP_DRIVS_PIN19_Pos)
#define PORT_PORTP_DRIVS_PIN20_Pos 20
#define PORT_PORTP_DRIVS_PIN20_Msk (0x01 << PORT_PORTP_DRIVS_PIN20_Pos)
#define PORT_PORTP_DRIVS_PIN21_Pos 21
#define PORT_PORTP_DRIVS_PIN21_Msk (0x01 << PORT_PORTP_DRIVS_PIN21_Pos)
#define PORT_PORTP_DRIVS_PIN22_Pos 22
#define PORT_PORTP_DRIVS_PIN22_Msk (0x01 << PORT_PORTP_DRIVS_PIN22_Pos)
#define PORT_PORTP_DRIVS_PIN23_Pos 23
#define PORT_PORTP_DRIVS_PIN23_Msk (0x01 << PORT_PORTP_DRIVS_PIN23_Pos)

#define PORT_PORTA_INEN_PIN0_Pos 0
#define PORT_PORTA_INEN_PIN0_Msk (0x01 << PORT_PORTA_INEN_PIN0_Pos)
#define PORT_PORTA_INEN_PIN1_Pos 1
#define PORT_PORTA_INEN_PIN1_Msk (0x01 << PORT_PORTA_INEN_PIN1_Pos)
#define PORT_PORTA_INEN_PIN2_Pos 2
#define PORT_PORTA_INEN_PIN2_Msk (0x01 << PORT_PORTA_INEN_PIN2_Pos)
#define PORT_PORTA_INEN_PIN3_Pos 3
#define PORT_PORTA_INEN_PIN3_Msk (0x01 << PORT_PORTA_INEN_PIN3_Pos)
#define PORT_PORTA_INEN_PIN4_Pos 4
#define PORT_PORTA_INEN_PIN4_Msk (0x01 << PORT_PORTA_INEN_PIN4_Pos)
#define PORT_PORTA_INEN_PIN5_Pos 5
#define PORT_PORTA_INEN_PIN5_Msk (0x01 << PORT_PORTA_INEN_PIN5_Pos)
#define PORT_PORTA_INEN_PIN6_Pos 6
#define PORT_PORTA_INEN_PIN6_Msk (0x01 << PORT_PORTA_INEN_PIN6_Pos)
#define PORT_PORTA_INEN_PIN7_Pos 7
#define PORT_PORTA_INEN_PIN7_Msk (0x01 << PORT_PORTA_INEN_PIN7_Pos)
#define PORT_PORTA_INEN_PIN8_Pos 8
#define PORT_PORTA_INEN_PIN8_Msk (0x01 << PORT_PORTA_INEN_PIN8_Pos)
#define PORT_PORTA_INEN_PIN9_Pos 9
#define PORT_PORTA_INEN_PIN9_Msk (0x01 << PORT_PORTA_INEN_PIN9_Pos)
#define PORT_PORTA_INEN_PIN10_Pos 10
#define PORT_PORTA_INEN_PIN10_Msk (0x01 << PORT_PORTA_INEN_PIN10_Pos)
#define PORT_PORTA_INEN_PIN11_Pos 11
#define PORT_PORTA_INEN_PIN11_Msk (0x01 << PORT_PORTA_INEN_PIN11_Pos)
#define PORT_PORTA_INEN_PIN12_Pos 12
#define PORT_PORTA_INEN_PIN12_Msk (0x01 << PORT_PORTA_INEN_PIN12_Pos)
#define PORT_PORTA_INEN_PIN13_Pos 13
#define PORT_PORTA_INEN_PIN13_Msk (0x01 << PORT_PORTA_INEN_PIN13_Pos)
#define PORT_PORTA_INEN_PIN14_Pos 14
#define PORT_PORTA_INEN_PIN14_Msk (0x01 << PORT_PORTA_INEN_PIN14_Pos)
#define PORT_PORTA_INEN_PIN15_Pos 15
#define PORT_PORTA_INEN_PIN15_Msk (0x01 << PORT_PORTA_INEN_PIN15_Pos)

#define PORT_PORTB_INEN_PIN0_Pos 0
#define PORT_PORTB_INEN_PIN0_Msk (0x01 << PORT_PORTB_INEN_PIN0_Pos)
#define PORT_PORTB_INEN_PIN1_Pos 1
#define PORT_PORTB_INEN_PIN1_Msk (0x01 << PORT_PORTB_INEN_PIN1_Pos)
#define PORT_PORTB_INEN_PIN2_Pos 2
#define PORT_PORTB_INEN_PIN2_Msk (0x01 << PORT_PORTB_INEN_PIN2_Pos)
#define PORT_PORTB_INEN_PIN3_Pos 3
#define PORT_PORTB_INEN_PIN3_Msk (0x01 << PORT_PORTB_INEN_PIN3_Pos)
#define PORT_PORTB_INEN_PIN4_Pos 4
#define PORT_PORTB_INEN_PIN4_Msk (0x01 << PORT_PORTB_INEN_PIN4_Pos)
#define PORT_PORTB_INEN_PIN5_Pos 5
#define PORT_PORTB_INEN_PIN5_Msk (0x01 << PORT_PORTB_INEN_PIN5_Pos)
#define PORT_PORTB_INEN_PIN6_Pos 6
#define PORT_PORTB_INEN_PIN6_Msk (0x01 << PORT_PORTB_INEN_PIN6_Pos)
#define PORT_PORTB_INEN_PIN7_Pos 7
#define PORT_PORTB_INEN_PIN7_Msk (0x01 << PORT_PORTB_INEN_PIN7_Pos)
#define PORT_PORTB_INEN_PIN8_Pos 8
#define PORT_PORTB_INEN_PIN8_Msk (0x01 << PORT_PORTB_INEN_PIN8_Pos)
#define PORT_PORTB_INEN_PIN9_Pos 9
#define PORT_PORTB_INEN_PIN9_Msk (0x01 << PORT_PORTB_INEN_PIN9_Pos)
#define PORT_PORTB_INEN_PIN10_Pos 10
#define PORT_PORTB_INEN_PIN10_Msk (0x01 << PORT_PORTB_INEN_PIN10_Pos)
#define PORT_PORTB_INEN_PIN11_Pos 11
#define PORT_PORTB_INEN_PIN11_Msk (0x01 << PORT_PORTB_INEN_PIN11_Pos)
#define PORT_PORTB_INEN_PIN12_Pos 12
#define PORT_PORTB_INEN_PIN12_Msk (0x01 << PORT_PORTB_INEN_PIN12_Pos)
#define PORT_PORTB_INEN_PIN13_Pos 13
#define PORT_PORTB_INEN_PIN13_Msk (0x01 << PORT_PORTB_INEN_PIN13_Pos)
#define PORT_PORTB_INEN_PIN14_Pos 14
#define PORT_PORTB_INEN_PIN14_Msk (0x01 << PORT_PORTB_INEN_PIN14_Pos)
#define PORT_PORTB_INEN_PIN15_Pos 15
#define PORT_PORTB_INEN_PIN15_Msk (0x01 << PORT_PORTB_INEN_PIN15_Pos)

#define PORT_PORTC_INEN_PIN0_Pos 0
#define PORT_PORTC_INEN_PIN0_Msk (0x01 << PORT_PORTC_INEN_PIN0_Pos)
#define PORT_PORTC_INEN_PIN1_Pos 1
#define PORT_PORTC_INEN_PIN1_Msk (0x01 << PORT_PORTC_INEN_PIN1_Pos)
#define PORT_PORTC_INEN_PIN2_Pos 2
#define PORT_PORTC_INEN_PIN2_Msk (0x01 << PORT_PORTC_INEN_PIN2_Pos)
#define PORT_PORTC_INEN_PIN3_Pos 3
#define PORT_PORTC_INEN_PIN3_Msk (0x01 << PORT_PORTC_INEN_PIN3_Pos)
#define PORT_PORTC_INEN_PIN4_Pos 4
#define PORT_PORTC_INEN_PIN4_Msk (0x01 << PORT_PORTC_INEN_PIN4_Pos)
#define PORT_PORTC_INEN_PIN5_Pos 5
#define PORT_PORTC_INEN_PIN5_Msk (0x01 << PORT_PORTC_INEN_PIN5_Pos)
#define PORT_PORTC_INEN_PIN6_Pos 6
#define PORT_PORTC_INEN_PIN6_Msk (0x01 << PORT_PORTC_INEN_PIN6_Pos)
#define PORT_PORTC_INEN_PIN7_Pos 7
#define PORT_PORTC_INEN_PIN7_Msk (0x01 << PORT_PORTC_INEN_PIN7_Pos)
#define PORT_PORTC_INEN_PIN8_Pos 8
#define PORT_PORTC_INEN_PIN8_Msk (0x01 << PORT_PORTC_INEN_PIN8_Pos)
#define PORT_PORTC_INEN_PIN9_Pos 9
#define PORT_PORTC_INEN_PIN9_Msk (0x01 << PORT_PORTC_INEN_PIN9_Pos)
#define PORT_PORTC_INEN_PIN10_Pos 10
#define PORT_PORTC_INEN_PIN10_Msk (0x01 << PORT_PORTC_INEN_PIN10_Pos)
#define PORT_PORTC_INEN_PIN11_Pos 11
#define PORT_PORTC_INEN_PIN11_Msk (0x01 << PORT_PORTC_INEN_PIN11_Pos)
#define PORT_PORTC_INEN_PIN12_Pos 12
#define PORT_PORTC_INEN_PIN12_Msk (0x01 << PORT_PORTC_INEN_PIN12_Pos)
#define PORT_PORTC_INEN_PIN13_Pos 13
#define PORT_PORTC_INEN_PIN13_Msk (0x01 << PORT_PORTC_INEN_PIN13_Pos)
#define PORT_PORTC_INEN_PIN14_Pos 14
#define PORT_PORTC_INEN_PIN14_Msk (0x01 << PORT_PORTC_INEN_PIN14_Pos)
#define PORT_PORTC_INEN_PIN15_Pos 15
#define PORT_PORTC_INEN_PIN15_Msk (0x01 << PORT_PORTC_INEN_PIN15_Pos)

#define PORT_PORTM_INEN_PIN0_Pos 0
#define PORT_PORTM_INEN_PIN0_Msk (0x01 << PORT_PORTM_INEN_PIN0_Pos)
#define PORT_PORTM_INEN_PIN1_Pos 1
#define PORT_PORTM_INEN_PIN1_Msk (0x01 << PORT_PORTM_INEN_PIN1_Pos)
#define PORT_PORTM_INEN_PIN2_Pos 2
#define PORT_PORTM_INEN_PIN2_Msk (0x01 << PORT_PORTM_INEN_PIN2_Pos)
#define PORT_PORTM_INEN_PIN3_Pos 3
#define PORT_PORTM_INEN_PIN3_Msk (0x01 << PORT_PORTM_INEN_PIN3_Pos)
#define PORT_PORTM_INEN_PIN4_Pos 4
#define PORT_PORTM_INEN_PIN4_Msk (0x01 << PORT_PORTM_INEN_PIN4_Pos)
#define PORT_PORTM_INEN_PIN5_Pos 5
#define PORT_PORTM_INEN_PIN5_Msk (0x01 << PORT_PORTM_INEN_PIN5_Pos)
#define PORT_PORTM_INEN_PIN6_Pos 6
#define PORT_PORTM_INEN_PIN6_Msk (0x01 << PORT_PORTM_INEN_PIN6_Pos)
#define PORT_PORTM_INEN_PIN7_Pos 7
#define PORT_PORTM_INEN_PIN7_Msk (0x01 << PORT_PORTM_INEN_PIN7_Pos)
#define PORT_PORTM_INEN_PIN8_Pos 8
#define PORT_PORTM_INEN_PIN8_Msk (0x01 << PORT_PORTM_INEN_PIN8_Pos)
#define PORT_PORTM_INEN_PIN9_Pos 9
#define PORT_PORTM_INEN_PIN9_Msk (0x01 << PORT_PORTM_INEN_PIN9_Pos)
#define PORT_PORTM_INEN_PIN10_Pos 10
#define PORT_PORTM_INEN_PIN10_Msk (0x01 << PORT_PORTM_INEN_PIN10_Pos)
#define PORT_PORTM_INEN_PIN11_Pos 11
#define PORT_PORTM_INEN_PIN11_Msk (0x01 << PORT_PORTM_INEN_PIN11_Pos)
#define PORT_PORTM_INEN_PIN12_Pos 12
#define PORT_PORTM_INEN_PIN12_Msk (0x01 << PORT_PORTM_INEN_PIN12_Pos)
#define PORT_PORTM_INEN_PIN13_Pos 13
#define PORT_PORTM_INEN_PIN13_Msk (0x01 << PORT_PORTM_INEN_PIN13_Pos)
#define PORT_PORTM_INEN_PIN14_Pos 14
#define PORT_PORTM_INEN_PIN14_Msk (0x01 << PORT_PORTM_INEN_PIN14_Pos)
#define PORT_PORTM_INEN_PIN15_Pos 15
#define PORT_PORTM_INEN_PIN15_Msk (0x01 << PORT_PORTM_INEN_PIN15_Pos)
#define PORT_PORTM_INEN_PIN16_Pos 16
#define PORT_PORTM_INEN_PIN16_Msk (0x01 << PORT_PORTM_INEN_PIN16_Pos)
#define PORT_PORTM_INEN_PIN17_Pos 17
#define PORT_PORTM_INEN_PIN17_Msk (0x01 << PORT_PORTM_INEN_PIN17_Pos)
#define PORT_PORTM_INEN_PIN18_Pos 18
#define PORT_PORTM_INEN_PIN18_Msk (0x01 << PORT_PORTM_INEN_PIN18_Pos)
#define PORT_PORTM_INEN_PIN19_Pos 19
#define PORT_PORTM_INEN_PIN19_Msk (0x01 << PORT_PORTM_INEN_PIN19_Pos)
#define PORT_PORTM_INEN_PIN20_Pos 20
#define PORT_PORTM_INEN_PIN20_Msk (0x01 << PORT_PORTM_INEN_PIN20_Pos)
#define PORT_PORTM_INEN_PIN21_Pos 21
#define PORT_PORTM_INEN_PIN21_Msk (0x01 << PORT_PORTM_INEN_PIN21_Pos)
#define PORT_PORTM_INEN_PIN22_Pos 22
#define PORT_PORTM_INEN_PIN22_Msk (0x01 << PORT_PORTM_INEN_PIN22_Pos)
#define PORT_PORTM_INEN_PIN23_Pos 23
#define PORT_PORTM_INEN_PIN23_Msk (0x01 << PORT_PORTM_INEN_PIN23_Pos)

#define PORT_PORTN_INEN_PIN0_Pos 0
#define PORT_PORTN_INEN_PIN0_Msk (0x01 << PORT_PORTN_INEN_PIN0_Pos)
#define PORT_PORTN_INEN_PIN1_Pos 1
#define PORT_PORTN_INEN_PIN1_Msk (0x01 << PORT_PORTN_INEN_PIN1_Pos)
#define PORT_PORTN_INEN_PIN2_Pos 2
#define PORT_PORTN_INEN_PIN2_Msk (0x01 << PORT_PORTN_INEN_PIN2_Pos)
#define PORT_PORTN_INEN_PIN3_Pos 3
#define PORT_PORTN_INEN_PIN3_Msk (0x01 << PORT_PORTN_INEN_PIN3_Pos)
#define PORT_PORTN_INEN_PIN4_Pos 4
#define PORT_PORTN_INEN_PIN4_Msk (0x01 << PORT_PORTN_INEN_PIN4_Pos)
#define PORT_PORTN_INEN_PIN5_Pos 5
#define PORT_PORTN_INEN_PIN5_Msk (0x01 << PORT_PORTN_INEN_PIN5_Pos)
#define PORT_PORTN_INEN_PIN6_Pos 6
#define PORT_PORTN_INEN_PIN6_Msk (0x01 << PORT_PORTN_INEN_PIN6_Pos)
#define PORT_PORTN_INEN_PIN7_Pos 7
#define PORT_PORTN_INEN_PIN7_Msk (0x01 << PORT_PORTN_INEN_PIN7_Pos)
#define PORT_PORTN_INEN_PIN8_Pos 8
#define PORT_PORTN_INEN_PIN8_Msk (0x01 << PORT_PORTN_INEN_PIN8_Pos)
#define PORT_PORTN_INEN_PIN9_Pos 9
#define PORT_PORTN_INEN_PIN9_Msk (0x01 << PORT_PORTN_INEN_PIN9_Pos)
#define PORT_PORTN_INEN_PIN10_Pos 10
#define PORT_PORTN_INEN_PIN10_Msk (0x01 << PORT_PORTN_INEN_PIN10_Pos)
#define PORT_PORTN_INEN_PIN11_Pos 11
#define PORT_PORTN_INEN_PIN11_Msk (0x01 << PORT_PORTN_INEN_PIN11_Pos)
#define PORT_PORTN_INEN_PIN12_Pos 12
#define PORT_PORTN_INEN_PIN12_Msk (0x01 << PORT_PORTN_INEN_PIN12_Pos)
#define PORT_PORTN_INEN_PIN13_Pos 13
#define PORT_PORTN_INEN_PIN13_Msk (0x01 << PORT_PORTN_INEN_PIN13_Pos)
#define PORT_PORTN_INEN_PIN14_Pos 14
#define PORT_PORTN_INEN_PIN14_Msk (0x01 << PORT_PORTN_INEN_PIN14_Pos)
#define PORT_PORTN_INEN_PIN15_Pos 15
#define PORT_PORTN_INEN_PIN15_Msk (0x01 << PORT_PORTN_INEN_PIN15_Pos)
#define PORT_PORTN_INEN_PIN16_Pos 16
#define PORT_PORTN_INEN_PIN16_Msk (0x01 << PORT_PORTN_INEN_PIN16_Pos)
#define PORT_PORTN_INEN_PIN17_Pos 17
#define PORT_PORTN_INEN_PIN17_Msk (0x01 << PORT_PORTN_INEN_PIN17_Pos)
#define PORT_PORTN_INEN_PIN18_Pos 18
#define PORT_PORTN_INEN_PIN18_Msk (0x01 << PORT_PORTN_INEN_PIN18_Pos)
#define PORT_PORTN_INEN_PIN19_Pos 19
#define PORT_PORTN_INEN_PIN19_Msk (0x01 << PORT_PORTN_INEN_PIN19_Pos)
#define PORT_PORTN_INEN_PIN20_Pos 20
#define PORT_PORTN_INEN_PIN20_Msk (0x01 << PORT_PORTN_INEN_PIN20_Pos)
#define PORT_PORTN_INEN_PIN21_Pos 21
#define PORT_PORTN_INEN_PIN21_Msk (0x01 << PORT_PORTN_INEN_PIN21_Pos)
#define PORT_PORTN_INEN_PIN22_Pos 22
#define PORT_PORTN_INEN_PIN22_Msk (0x01 << PORT_PORTN_INEN_PIN22_Pos)
#define PORT_PORTN_INEN_PIN23_Pos 23
#define PORT_PORTN_INEN_PIN23_Msk (0x01 << PORT_PORTN_INEN_PIN23_Pos)

#define PORT_PORTP_INEN_PIN0_Pos 0
#define PORT_PORTP_INEN_PIN0_Msk (0x01 << PORT_PORTP_INEN_PIN0_Pos)
#define PORT_PORTP_INEN_PIN1_Pos 1
#define PORT_PORTP_INEN_PIN1_Msk (0x01 << PORT_PORTP_INEN_PIN1_Pos)
#define PORT_PORTP_INEN_PIN2_Pos 2
#define PORT_PORTP_INEN_PIN2_Msk (0x01 << PORT_PORTP_INEN_PIN2_Pos)
#define PORT_PORTP_INEN_PIN3_Pos 3
#define PORT_PORTP_INEN_PIN3_Msk (0x01 << PORT_PORTP_INEN_PIN3_Pos)
#define PORT_PORTP_INEN_PIN4_Pos 4
#define PORT_PORTP_INEN_PIN4_Msk (0x01 << PORT_PORTP_INEN_PIN4_Pos)
#define PORT_PORTP_INEN_PIN5_Pos 5
#define PORT_PORTP_INEN_PIN5_Msk (0x01 << PORT_PORTP_INEN_PIN5_Pos)
#define PORT_PORTP_INEN_PIN6_Pos 6
#define PORT_PORTP_INEN_PIN6_Msk (0x01 << PORT_PORTP_INEN_PIN6_Pos)
#define PORT_PORTP_INEN_PIN7_Pos 7
#define PORT_PORTP_INEN_PIN7_Msk (0x01 << PORT_PORTP_INEN_PIN7_Pos)
#define PORT_PORTP_INEN_PIN8_Pos 8
#define PORT_PORTP_INEN_PIN8_Msk (0x01 << PORT_PORTP_INEN_PIN8_Pos)
#define PORT_PORTP_INEN_PIN9_Pos 9
#define PORT_PORTP_INEN_PIN9_Msk (0x01 << PORT_PORTP_INEN_PIN9_Pos)
#define PORT_PORTP_INEN_PIN10_Pos 10
#define PORT_PORTP_INEN_PIN10_Msk (0x01 << PORT_PORTP_INEN_PIN10_Pos)
#define PORT_PORTP_INEN_PIN11_Pos 11
#define PORT_PORTP_INEN_PIN11_Msk (0x01 << PORT_PORTP_INEN_PIN11_Pos)
#define PORT_PORTP_INEN_PIN12_Pos 12
#define PORT_PORTP_INEN_PIN12_Msk (0x01 << PORT_PORTP_INEN_PIN12_Pos)
#define PORT_PORTP_INEN_PIN13_Pos 13
#define PORT_PORTP_INEN_PIN13_Msk (0x01 << PORT_PORTP_INEN_PIN13_Pos)
#define PORT_PORTP_INEN_PIN14_Pos 14
#define PORT_PORTP_INEN_PIN14_Msk (0x01 << PORT_PORTP_INEN_PIN14_Pos)
#define PORT_PORTP_INEN_PIN15_Pos 15
#define PORT_PORTP_INEN_PIN15_Msk (0x01 << PORT_PORTP_INEN_PIN15_Pos)
#define PORT_PORTP_INEN_PIN16_Pos 16
#define PORT_PORTP_INEN_PIN16_Msk (0x01 << PORT_PORTP_INEN_PIN16_Pos)
#define PORT_PORTP_INEN_PIN17_Pos 17
#define PORT_PORTP_INEN_PIN17_Msk (0x01 << PORT_PORTP_INEN_PIN17_Pos)
#define PORT_PORTP_INEN_PIN18_Pos 18
#define PORT_PORTP_INEN_PIN18_Msk (0x01 << PORT_PORTP_INEN_PIN18_Pos)
#define PORT_PORTP_INEN_PIN19_Pos 19
#define PORT_PORTP_INEN_PIN19_Msk (0x01 << PORT_PORTP_INEN_PIN19_Pos)
#define PORT_PORTP_INEN_PIN20_Pos 20
#define PORT_PORTP_INEN_PIN20_Msk (0x01 << PORT_PORTP_INEN_PIN20_Pos)
#define PORT_PORTP_INEN_PIN21_Pos 21
#define PORT_PORTP_INEN_PIN21_Msk (0x01 << PORT_PORTP_INEN_PIN21_Pos)
#define PORT_PORTP_INEN_PIN22_Pos 22
#define PORT_PORTP_INEN_PIN22_Msk (0x01 << PORT_PORTP_INEN_PIN22_Pos)
#define PORT_PORTP_INEN_PIN23_Pos 23
#define PORT_PORTP_INEN_PIN23_Msk (0x01 << PORT_PORTP_INEN_PIN23_Pos)

typedef struct
{
    __IO uint32_t DATA;
#define PIN0 0
#define PIN1 1
#define PIN2 2
#define PIN3 3
#define PIN4 4
#define PIN5 5
#define PIN6 6
#define PIN7 7
#define PIN8 8
#define PIN9 9
#define PIN10 10
#define PIN11 11
#define PIN12 12
#define PIN13 13
#define PIN14 14
#define PIN15 15
#define PIN16 16
#define PIN17 17
#define PIN18 18
#define PIN19 19
#define PIN20 20
#define PIN21 21
#define PIN22 22
#define PIN23 23
#define PIN24 24

    __IO uint32_t DIR; //0 输入	1 输出

    __IO uint32_t INTLVLTRG; //Interrupt Level Trigger  1 电平触发中断	0 边沿触发中断

    __IO uint32_t INTBE; //Both Edge，当INTLVLTRG设为边沿触发中断时，此位置1表示上升沿和下降沿都触发中断，置0时触发边沿由INTRISEEN选择

    __IO uint32_t INTRISEEN; //Interrupt Rise Edge Enable   1 上升沿/高电平触发中断	0 下降沿/低电平触发中断

    __IO uint32_t INTEN; //1 中断使能	0 中断禁止

    __IO uint32_t INTRAWSTAT; //中断检测单元是否检测到了触发中断的条件 1 检测到了中断触发条件	0 没有检测到中断触发条件

    __IO uint32_t INTSTAT; //INTSTAT.PIN0 = INTRAWSTAT.PIN0 & INTEN.PIN0

    __IO uint32_t INTCLR; //写1清除中断标志，只对边沿触发中断有用
} GPIO_TypeDef;

#define GPIO_DATA_PIN0_Pos 0
#define GPIO_DATA_PIN0_Msk (0x01 << GPIO_DATA_PIN0_Pos)
#define GPIO_DATA_PIN1_Pos 1
#define GPIO_DATA_PIN1_Msk (0x01 << GPIO_DATA_PIN1_Pos)
#define GPIO_DATA_PIN2_Pos 2
#define GPIO_DATA_PIN2_Msk (0x01 << GPIO_DATA_PIN2_Pos)
#define GPIO_DATA_PIN3_Pos 3
#define GPIO_DATA_PIN3_Msk (0x01 << GPIO_DATA_PIN3_Pos)
#define GPIO_DATA_PIN4_Pos 4
#define GPIO_DATA_PIN4_Msk (0x01 << GPIO_DATA_PIN4_Pos)
#define GPIO_DATA_PIN5_Pos 5
#define GPIO_DATA_PIN5_Msk (0x01 << GPIO_DATA_PIN5_Pos)
#define GPIO_DATA_PIN6_Pos 6
#define GPIO_DATA_PIN6_Msk (0x01 << GPIO_DATA_PIN6_Pos)
#define GPIO_DATA_PIN7_Pos 7
#define GPIO_DATA_PIN7_Msk (0x01 << GPIO_DATA_PIN7_Pos)
#define GPIO_DATA_PIN8_Pos 8
#define GPIO_DATA_PIN8_Msk (0x01 << GPIO_DATA_PIN8_Pos)
#define GPIO_DATA_PIN9_Pos 9
#define GPIO_DATA_PIN9_Msk (0x01 << GPIO_DATA_PIN9_Pos)
#define GPIO_DATA_PIN10_Pos 10
#define GPIO_DATA_PIN10_Msk (0x01 << GPIO_DATA_PIN10_Pos)
#define GPIO_DATA_PIN11_Pos 11
#define GPIO_DATA_PIN11_Msk (0x01 << GPIO_DATA_PIN11_Pos)
#define GPIO_DATA_PIN12_Pos 12
#define GPIO_DATA_PIN12_Msk (0x01 << GPIO_DATA_PIN12_Pos)
#define GPIO_DATA_PIN13_Pos 13
#define GPIO_DATA_PIN13_Msk (0x01 << GPIO_DATA_PIN13_Pos)
#define GPIO_DATA_PIN14_Pos 14
#define GPIO_DATA_PIN14_Msk (0x01 << GPIO_DATA_PIN14_Pos)
#define GPIO_DATA_PIN15_Pos 15
#define GPIO_DATA_PIN15_Msk (0x01 << GPIO_DATA_PIN15_Pos)
#define GPIO_DATA_PIN16_Pos 16
#define GPIO_DATA_PIN16_Msk (0x01 << GPIO_DATA_PIN16_Pos)
#define GPIO_DATA_PIN17_Pos 17
#define GPIO_DATA_PIN17_Msk (0x01 << GPIO_DATA_PIN17_Pos)
#define GPIO_DATA_PIN18_Pos 18
#define GPIO_DATA_PIN18_Msk (0x01 << GPIO_DATA_PIN18_Pos)
#define GPIO_DATA_PIN19_Pos 19
#define GPIO_DATA_PIN19_Msk (0x01 << GPIO_DATA_PIN19_Pos)
#define GPIO_DATA_PIN20_Pos 20
#define GPIO_DATA_PIN20_Msk (0x01 << GPIO_DATA_PIN20_Pos)
#define GPIO_DATA_PIN21_Pos 21
#define GPIO_DATA_PIN21_Msk (0x01 << GPIO_DATA_PIN21_Pos)
#define GPIO_DATA_PIN22_Pos 22
#define GPIO_DATA_PIN22_Msk (0x01 << GPIO_DATA_PIN22_Pos)
#define GPIO_DATA_PIN23_Pos 23
#define GPIO_DATA_PIN23_Msk (0x01 << GPIO_DATA_PIN23_Pos)

#define GPIO_DIR_PIN0_Pos 0
#define GPIO_DIR_PIN0_Msk (0x01 << GPIO_DIR_PIN0_Pos)
#define GPIO_DIR_PIN1_Pos 1
#define GPIO_DIR_PIN1_Msk (0x01 << GPIO_DIR_PIN1_Pos)
#define GPIO_DIR_PIN2_Pos 2
#define GPIO_DIR_PIN2_Msk (0x01 << GPIO_DIR_PIN2_Pos)
#define GPIO_DIR_PIN3_Pos 3
#define GPIO_DIR_PIN3_Msk (0x01 << GPIO_DIR_PIN3_Pos)
#define GPIO_DIR_PIN4_Pos 4
#define GPIO_DIR_PIN4_Msk (0x01 << GPIO_DIR_PIN4_Pos)
#define GPIO_DIR_PIN5_Pos 5
#define GPIO_DIR_PIN5_Msk (0x01 << GPIO_DIR_PIN5_Pos)
#define GPIO_DIR_PIN6_Pos 6
#define GPIO_DIR_PIN6_Msk (0x01 << GPIO_DIR_PIN6_Pos)
#define GPIO_DIR_PIN7_Pos 7
#define GPIO_DIR_PIN7_Msk (0x01 << GPIO_DIR_PIN7_Pos)
#define GPIO_DIR_PIN8_Pos 8
#define GPIO_DIR_PIN8_Msk (0x01 << GPIO_DIR_PIN8_Pos)
#define GPIO_DIR_PIN9_Pos 9
#define GPIO_DIR_PIN9_Msk (0x01 << GPIO_DIR_PIN9_Pos)
#define GPIO_DIR_PIN10_Pos 10
#define GPIO_DIR_PIN10_Msk (0x01 << GPIO_DIR_PIN10_Pos)
#define GPIO_DIR_PIN11_Pos 11
#define GPIO_DIR_PIN11_Msk (0x01 << GPIO_DIR_PIN11_Pos)
#define GPIO_DIR_PIN12_Pos 12
#define GPIO_DIR_PIN12_Msk (0x01 << GPIO_DIR_PIN12_Pos)
#define GPIO_DIR_PIN13_Pos 13
#define GPIO_DIR_PIN13_Msk (0x01 << GPIO_DIR_PIN13_Pos)
#define GPIO_DIR_PIN14_Pos 14
#define GPIO_DIR_PIN14_Msk (0x01 << GPIO_DIR_PIN14_Pos)
#define GPIO_DIR_PIN15_Pos 15
#define GPIO_DIR_PIN15_Msk (0x01 << GPIO_DIR_PIN15_Pos)
#define GPIO_DIR_PIN16_Pos 16
#define GPIO_DIR_PIN16_Msk (0x01 << GPIO_DIR_PIN16_Pos)
#define GPIO_DIR_PIN17_Pos 17
#define GPIO_DIR_PIN17_Msk (0x01 << GPIO_DIR_PIN17_Pos)
#define GPIO_DIR_PIN18_Pos 18
#define GPIO_DIR_PIN18_Msk (0x01 << GPIO_DIR_PIN18_Pos)
#define GPIO_DIR_PIN19_Pos 19
#define GPIO_DIR_PIN19_Msk (0x01 << GPIO_DIR_PIN19_Pos)
#define GPIO_DIR_PIN20_Pos 20
#define GPIO_DIR_PIN20_Msk (0x01 << GPIO_DIR_PIN20_Pos)
#define GPIO_DIR_PIN21_Pos 21
#define GPIO_DIR_PIN21_Msk (0x01 << GPIO_DIR_PIN21_Pos)
#define GPIO_DIR_PIN22_Pos 22
#define GPIO_DIR_PIN22_Msk (0x01 << GPIO_DIR_PIN22_Pos)
#define GPIO_DIR_PIN23_Pos 23
#define GPIO_DIR_PIN23_Msk (0x01 << GPIO_DIR_PIN23_Pos)

#define GPIO_INTLVLTRG_PIN0_Pos 0
#define GPIO_INTLVLTRG_PIN0_Msk (0x01 << GPIO_INTLVLTRG_PIN0_Pos)
#define GPIO_INTLVLTRG_PIN1_Pos 1
#define GPIO_INTLVLTRG_PIN1_Msk (0x01 << GPIO_INTLVLTRG_PIN1_Pos)
#define GPIO_INTLVLTRG_PIN2_Pos 2
#define GPIO_INTLVLTRG_PIN2_Msk (0x01 << GPIO_INTLVLTRG_PIN2_Pos)
#define GPIO_INTLVLTRG_PIN3_Pos 3
#define GPIO_INTLVLTRG_PIN3_Msk (0x01 << GPIO_INTLVLTRG_PIN3_Pos)
#define GPIO_INTLVLTRG_PIN4_Pos 4
#define GPIO_INTLVLTRG_PIN4_Msk (0x01 << GPIO_INTLVLTRG_PIN4_Pos)
#define GPIO_INTLVLTRG_PIN5_Pos 5
#define GPIO_INTLVLTRG_PIN5_Msk (0x01 << GPIO_INTLVLTRG_PIN5_Pos)
#define GPIO_INTLVLTRG_PIN6_Pos 6
#define GPIO_INTLVLTRG_PIN6_Msk (0x01 << GPIO_INTLVLTRG_PIN6_Pos)
#define GPIO_INTLVLTRG_PIN7_Pos 7
#define GPIO_INTLVLTRG_PIN7_Msk (0x01 << GPIO_INTLVLTRG_PIN7_Pos)
#define GPIO_INTLVLTRG_PIN8_Pos 8
#define GPIO_INTLVLTRG_PIN8_Msk (0x01 << GPIO_INTLVLTRG_PIN8_Pos)
#define GPIO_INTLVLTRG_PIN9_Pos 9
#define GPIO_INTLVLTRG_PIN9_Msk (0x01 << GPIO_INTLVLTRG_PIN9_Pos)
#define GPIO_INTLVLTRG_PIN10_Pos 10
#define GPIO_INTLVLTRG_PIN10_Msk (0x01 << GPIO_INTLVLTRG_PIN10_Pos)
#define GPIO_INTLVLTRG_PIN11_Pos 11
#define GPIO_INTLVLTRG_PIN11_Msk (0x01 << GPIO_INTLVLTRG_PIN11_Pos)
#define GPIO_INTLVLTRG_PIN12_Pos 12
#define GPIO_INTLVLTRG_PIN12_Msk (0x01 << GPIO_INTLVLTRG_PIN12_Pos)
#define GPIO_INTLVLTRG_PIN13_Pos 13
#define GPIO_INTLVLTRG_PIN13_Msk (0x01 << GPIO_INTLVLTRG_PIN13_Pos)
#define GPIO_INTLVLTRG_PIN14_Pos 14
#define GPIO_INTLVLTRG_PIN14_Msk (0x01 << GPIO_INTLVLTRG_PIN14_Pos)
#define GPIO_INTLVLTRG_PIN15_Pos 15
#define GPIO_INTLVLTRG_PIN15_Msk (0x01 << GPIO_INTLVLTRG_PIN15_Pos)
#define GPIO_INTLVLTRG_PIN16_Pos 16
#define GPIO_INTLVLTRG_PIN16_Msk (0x01 << GPIO_INTLVLTRG_PIN16_Pos)
#define GPIO_INTLVLTRG_PIN17_Pos 17
#define GPIO_INTLVLTRG_PIN17_Msk (0x01 << GPIO_INTLVLTRG_PIN17_Pos)
#define GPIO_INTLVLTRG_PIN18_Pos 18
#define GPIO_INTLVLTRG_PIN18_Msk (0x01 << GPIO_INTLVLTRG_PIN18_Pos)
#define GPIO_INTLVLTRG_PIN19_Pos 19
#define GPIO_INTLVLTRG_PIN19_Msk (0x01 << GPIO_INTLVLTRG_PIN19_Pos)
#define GPIO_INTLVLTRG_PIN20_Pos 20
#define GPIO_INTLVLTRG_PIN20_Msk (0x01 << GPIO_INTLVLTRG_PIN20_Pos)
#define GPIO_INTLVLTRG_PIN21_Pos 21
#define GPIO_INTLVLTRG_PIN21_Msk (0x01 << GPIO_INTLVLTRG_PIN21_Pos)
#define GPIO_INTLVLTRG_PIN22_Pos 22
#define GPIO_INTLVLTRG_PIN22_Msk (0x01 << GPIO_INTLVLTRG_PIN22_Pos)
#define GPIO_INTLVLTRG_PIN23_Pos 23
#define GPIO_INTLVLTRG_PIN23_Msk (0x01 << GPIO_INTLVLTRG_PIN23_Pos)

#define GPIO_INTBE_PIN0_Pos 0
#define GPIO_INTBE_PIN0_Msk (0x01 << GPIO_INTBE_PIN0_Pos)
#define GPIO_INTBE_PIN1_Pos 1
#define GPIO_INTBE_PIN1_Msk (0x01 << GPIO_INTBE_PIN1_Pos)
#define GPIO_INTBE_PIN2_Pos 2
#define GPIO_INTBE_PIN2_Msk (0x01 << GPIO_INTBE_PIN2_Pos)
#define GPIO_INTBE_PIN3_Pos 3
#define GPIO_INTBE_PIN3_Msk (0x01 << GPIO_INTBE_PIN3_Pos)
#define GPIO_INTBE_PIN4_Pos 4
#define GPIO_INTBE_PIN4_Msk (0x01 << GPIO_INTBE_PIN4_Pos)
#define GPIO_INTBE_PIN5_Pos 5
#define GPIO_INTBE_PIN5_Msk (0x01 << GPIO_INTBE_PIN5_Pos)
#define GPIO_INTBE_PIN6_Pos 6
#define GPIO_INTBE_PIN6_Msk (0x01 << GPIO_INTBE_PIN6_Pos)
#define GPIO_INTBE_PIN7_Pos 7
#define GPIO_INTBE_PIN7_Msk (0x01 << GPIO_INTBE_PIN7_Pos)
#define GPIO_INTBE_PIN8_Pos 8
#define GPIO_INTBE_PIN8_Msk (0x01 << GPIO_INTBE_PIN8_Pos)
#define GPIO_INTBE_PIN9_Pos 9
#define GPIO_INTBE_PIN9_Msk (0x01 << GPIO_INTBE_PIN9_Pos)
#define GPIO_INTBE_PIN10_Pos 10
#define GPIO_INTBE_PIN10_Msk (0x01 << GPIO_INTBE_PIN10_Pos)
#define GPIO_INTBE_PIN11_Pos 11
#define GPIO_INTBE_PIN11_Msk (0x01 << GPIO_INTBE_PIN11_Pos)
#define GPIO_INTBE_PIN12_Pos 12
#define GPIO_INTBE_PIN12_Msk (0x01 << GPIO_INTBE_PIN12_Pos)
#define GPIO_INTBE_PIN13_Pos 13
#define GPIO_INTBE_PIN13_Msk (0x01 << GPIO_INTBE_PIN13_Pos)
#define GPIO_INTBE_PIN14_Pos 14
#define GPIO_INTBE_PIN14_Msk (0x01 << GPIO_INTBE_PIN14_Pos)
#define GPIO_INTBE_PIN15_Pos 15
#define GPIO_INTBE_PIN15_Msk (0x01 << GPIO_INTBE_PIN15_Pos)
#define GPIO_INTBE_PIN16_Pos 16
#define GPIO_INTBE_PIN16_Msk (0x01 << GPIO_INTBE_PIN16_Pos)
#define GPIO_INTBE_PIN17_Pos 17
#define GPIO_INTBE_PIN17_Msk (0x01 << GPIO_INTBE_PIN17_Pos)
#define GPIO_INTBE_PIN18_Pos 18
#define GPIO_INTBE_PIN18_Msk (0x01 << GPIO_INTBE_PIN18_Pos)
#define GPIO_INTBE_PIN19_Pos 19
#define GPIO_INTBE_PIN19_Msk (0x01 << GPIO_INTBE_PIN19_Pos)
#define GPIO_INTBE_PIN20_Pos 20
#define GPIO_INTBE_PIN20_Msk (0x01 << GPIO_INTBE_PIN20_Pos)
#define GPIO_INTBE_PIN21_Pos 21
#define GPIO_INTBE_PIN21_Msk (0x01 << GPIO_INTBE_PIN21_Pos)
#define GPIO_INTBE_PIN22_Pos 22
#define GPIO_INTBE_PIN22_Msk (0x01 << GPIO_INTBE_PIN22_Pos)
#define GPIO_INTBE_PIN23_Pos 23
#define GPIO_INTBE_PIN23_Msk (0x01 << GPIO_INTBE_PIN23_Pos)

#define GPIO_INTRISEEN_PIN0_Pos 0
#define GPIO_INTRISEEN_PIN0_Msk (0x01 << GPIO_INTRISEEN_PIN0_Pos)
#define GPIO_INTRISEEN_PIN1_Pos 1
#define GPIO_INTRISEEN_PIN1_Msk (0x01 << GPIO_INTRISEEN_PIN1_Pos)
#define GPIO_INTRISEEN_PIN2_Pos 2
#define GPIO_INTRISEEN_PIN2_Msk (0x01 << GPIO_INTRISEEN_PIN2_Pos)
#define GPIO_INTRISEEN_PIN3_Pos 3
#define GPIO_INTRISEEN_PIN3_Msk (0x01 << GPIO_INTRISEEN_PIN3_Pos)
#define GPIO_INTRISEEN_PIN4_Pos 4
#define GPIO_INTRISEEN_PIN4_Msk (0x01 << GPIO_INTRISEEN_PIN4_Pos)
#define GPIO_INTRISEEN_PIN5_Pos 5
#define GPIO_INTRISEEN_PIN5_Msk (0x01 << GPIO_INTRISEEN_PIN5_Pos)
#define GPIO_INTRISEEN_PIN6_Pos 6
#define GPIO_INTRISEEN_PIN6_Msk (0x01 << GPIO_INTRISEEN_PIN6_Pos)
#define GPIO_INTRISEEN_PIN7_Pos 7
#define GPIO_INTRISEEN_PIN7_Msk (0x01 << GPIO_INTRISEEN_PIN7_Pos)
#define GPIO_INTRISEEN_PIN8_Pos 8
#define GPIO_INTRISEEN_PIN8_Msk (0x01 << GPIO_INTRISEEN_PIN8_Pos)
#define GPIO_INTRISEEN_PIN9_Pos 9
#define GPIO_INTRISEEN_PIN9_Msk (0x01 << GPIO_INTRISEEN_PIN9_Pos)
#define GPIO_INTRISEEN_PIN10_Pos 10
#define GPIO_INTRISEEN_PIN10_Msk (0x01 << GPIO_INTRISEEN_PIN10_Pos)
#define GPIO_INTRISEEN_PIN11_Pos 11
#define GPIO_INTRISEEN_PIN11_Msk (0x01 << GPIO_INTRISEEN_PIN11_Pos)
#define GPIO_INTRISEEN_PIN12_Pos 12
#define GPIO_INTRISEEN_PIN12_Msk (0x01 << GPIO_INTRISEEN_PIN12_Pos)
#define GPIO_INTRISEEN_PIN13_Pos 13
#define GPIO_INTRISEEN_PIN13_Msk (0x01 << GPIO_INTRISEEN_PIN13_Pos)
#define GPIO_INTRISEEN_PIN14_Pos 14
#define GPIO_INTRISEEN_PIN14_Msk (0x01 << GPIO_INTRISEEN_PIN14_Pos)
#define GPIO_INTRISEEN_PIN15_Pos 15
#define GPIO_INTRISEEN_PIN15_Msk (0x01 << GPIO_INTRISEEN_PIN15_Pos)
#define GPIO_INTRISEEN_PIN16_Pos 16
#define GPIO_INTRISEEN_PIN16_Msk (0x01 << GPIO_INTRISEEN_PIN16_Pos)
#define GPIO_INTRISEEN_PIN17_Pos 17
#define GPIO_INTRISEEN_PIN17_Msk (0x01 << GPIO_INTRISEEN_PIN17_Pos)
#define GPIO_INTRISEEN_PIN18_Pos 18
#define GPIO_INTRISEEN_PIN18_Msk (0x01 << GPIO_INTRISEEN_PIN18_Pos)
#define GPIO_INTRISEEN_PIN19_Pos 19
#define GPIO_INTRISEEN_PIN19_Msk (0x01 << GPIO_INTRISEEN_PIN19_Pos)
#define GPIO_INTRISEEN_PIN20_Pos 20
#define GPIO_INTRISEEN_PIN20_Msk (0x01 << GPIO_INTRISEEN_PIN20_Pos)
#define GPIO_INTRISEEN_PIN21_Pos 21
#define GPIO_INTRISEEN_PIN21_Msk (0x01 << GPIO_INTRISEEN_PIN21_Pos)
#define GPIO_INTRISEEN_PIN22_Pos 22
#define GPIO_INTRISEEN_PIN22_Msk (0x01 << GPIO_INTRISEEN_PIN22_Pos)
#define GPIO_INTRISEEN_PIN23_Pos 23
#define GPIO_INTRISEEN_PIN23_Msk (0x01 << GPIO_INTRISEEN_PIN23_Pos)

#define GPIO_INTEN_PIN0_Pos 0
#define GPIO_INTEN_PIN0_Msk (0x01 << GPIO_INTEN_PIN0_Pos)
#define GPIO_INTEN_PIN1_Pos 1
#define GPIO_INTEN_PIN1_Msk (0x01 << GPIO_INTEN_PIN1_Pos)
#define GPIO_INTEN_PIN2_Pos 2
#define GPIO_INTEN_PIN2_Msk (0x01 << GPIO_INTEN_PIN2_Pos)
#define GPIO_INTEN_PIN3_Pos 3
#define GPIO_INTEN_PIN3_Msk (0x01 << GPIO_INTEN_PIN3_Pos)
#define GPIO_INTEN_PIN4_Pos 4
#define GPIO_INTEN_PIN4_Msk (0x01 << GPIO_INTEN_PIN4_Pos)
#define GPIO_INTEN_PIN5_Pos 5
#define GPIO_INTEN_PIN5_Msk (0x01 << GPIO_INTEN_PIN5_Pos)
#define GPIO_INTEN_PIN6_Pos 6
#define GPIO_INTEN_PIN6_Msk (0x01 << GPIO_INTEN_PIN6_Pos)
#define GPIO_INTEN_PIN7_Pos 7
#define GPIO_INTEN_PIN7_Msk (0x01 << GPIO_INTEN_PIN7_Pos)
#define GPIO_INTEN_PIN8_Pos 8
#define GPIO_INTEN_PIN8_Msk (0x01 << GPIO_INTEN_PIN8_Pos)
#define GPIO_INTEN_PIN9_Pos 9
#define GPIO_INTEN_PIN9_Msk (0x01 << GPIO_INTEN_PIN9_Pos)
#define GPIO_INTEN_PIN10_Pos 10
#define GPIO_INTEN_PIN10_Msk (0x01 << GPIO_INTEN_PIN10_Pos)
#define GPIO_INTEN_PIN11_Pos 11
#define GPIO_INTEN_PIN11_Msk (0x01 << GPIO_INTEN_PIN11_Pos)
#define GPIO_INTEN_PIN12_Pos 12
#define GPIO_INTEN_PIN12_Msk (0x01 << GPIO_INTEN_PIN12_Pos)
#define GPIO_INTEN_PIN13_Pos 13
#define GPIO_INTEN_PIN13_Msk (0x01 << GPIO_INTEN_PIN13_Pos)
#define GPIO_INTEN_PIN14_Pos 14
#define GPIO_INTEN_PIN14_Msk (0x01 << GPIO_INTEN_PIN14_Pos)
#define GPIO_INTEN_PIN15_Pos 15
#define GPIO_INTEN_PIN15_Msk (0x01 << GPIO_INTEN_PIN15_Pos)
#define GPIO_INTEN_PIN16_Pos 16
#define GPIO_INTEN_PIN16_Msk (0x01 << GPIO_INTEN_PIN16_Pos)
#define GPIO_INTEN_PIN17_Pos 17
#define GPIO_INTEN_PIN17_Msk (0x01 << GPIO_INTEN_PIN17_Pos)
#define GPIO_INTEN_PIN18_Pos 18
#define GPIO_INTEN_PIN18_Msk (0x01 << GPIO_INTEN_PIN18_Pos)
#define GPIO_INTEN_PIN19_Pos 19
#define GPIO_INTEN_PIN19_Msk (0x01 << GPIO_INTEN_PIN19_Pos)
#define GPIO_INTEN_PIN20_Pos 20
#define GPIO_INTEN_PIN20_Msk (0x01 << GPIO_INTEN_PIN20_Pos)
#define GPIO_INTEN_PIN21_Pos 21
#define GPIO_INTEN_PIN21_Msk (0x01 << GPIO_INTEN_PIN21_Pos)
#define GPIO_INTEN_PIN22_Pos 22
#define GPIO_INTEN_PIN22_Msk (0x01 << GPIO_INTEN_PIN22_Pos)
#define GPIO_INTEN_PIN23_Pos 23
#define GPIO_INTEN_PIN23_Msk (0x01 << GPIO_INTEN_PIN23_Pos)

#define GPIO_INTRAWSTAT_PIN0_Pos 0
#define GPIO_INTRAWSTAT_PIN0_Msk (0x01 << GPIO_INTRAWSTAT_PIN0_Pos)
#define GPIO_INTRAWSTAT_PIN1_Pos 1
#define GPIO_INTRAWSTAT_PIN1_Msk (0x01 << GPIO_INTRAWSTAT_PIN1_Pos)
#define GPIO_INTRAWSTAT_PIN2_Pos 2
#define GPIO_INTRAWSTAT_PIN2_Msk (0x01 << GPIO_INTRAWSTAT_PIN2_Pos)
#define GPIO_INTRAWSTAT_PIN3_Pos 3
#define GPIO_INTRAWSTAT_PIN3_Msk (0x01 << GPIO_INTRAWSTAT_PIN3_Pos)
#define GPIO_INTRAWSTAT_PIN4_Pos 4
#define GPIO_INTRAWSTAT_PIN4_Msk (0x01 << GPIO_INTRAWSTAT_PIN4_Pos)
#define GPIO_INTRAWSTAT_PIN5_Pos 5
#define GPIO_INTRAWSTAT_PIN5_Msk (0x01 << GPIO_INTRAWSTAT_PIN5_Pos)
#define GPIO_INTRAWSTAT_PIN6_Pos 6
#define GPIO_INTRAWSTAT_PIN6_Msk (0x01 << GPIO_INTRAWSTAT_PIN6_Pos)
#define GPIO_INTRAWSTAT_PIN7_Pos 7
#define GPIO_INTRAWSTAT_PIN7_Msk (0x01 << GPIO_INTRAWSTAT_PIN7_Pos)
#define GPIO_INTRAWSTAT_PIN8_Pos 8
#define GPIO_INTRAWSTAT_PIN8_Msk (0x01 << GPIO_INTRAWSTAT_PIN8_Pos)
#define GPIO_INTRAWSTAT_PIN9_Pos 9
#define GPIO_INTRAWSTAT_PIN9_Msk (0x01 << GPIO_INTRAWSTAT_PIN9_Pos)
#define GPIO_INTRAWSTAT_PIN10_Pos 10
#define GPIO_INTRAWSTAT_PIN10_Msk (0x01 << GPIO_INTRAWSTAT_PIN10_Pos)
#define GPIO_INTRAWSTAT_PIN11_Pos 11
#define GPIO_INTRAWSTAT_PIN11_Msk (0x01 << GPIO_INTRAWSTAT_PIN11_Pos)
#define GPIO_INTRAWSTAT_PIN12_Pos 12
#define GPIO_INTRAWSTAT_PIN12_Msk (0x01 << GPIO_INTRAWSTAT_PIN12_Pos)
#define GPIO_INTRAWSTAT_PIN13_Pos 13
#define GPIO_INTRAWSTAT_PIN13_Msk (0x01 << GPIO_INTRAWSTAT_PIN13_Pos)
#define GPIO_INTRAWSTAT_PIN14_Pos 14
#define GPIO_INTRAWSTAT_PIN14_Msk (0x01 << GPIO_INTRAWSTAT_PIN14_Pos)
#define GPIO_INTRAWSTAT_PIN15_Pos 15
#define GPIO_INTRAWSTAT_PIN15_Msk (0x01 << GPIO_INTRAWSTAT_PIN15_Pos)
#define GPIO_INTRAWSTAT_PIN16_Pos 16
#define GPIO_INTRAWSTAT_PIN16_Msk (0x01 << GPIO_INTRAWSTAT_PIN16_Pos)
#define GPIO_INTRAWSTAT_PIN17_Pos 17
#define GPIO_INTRAWSTAT_PIN17_Msk (0x01 << GPIO_INTRAWSTAT_PIN17_Pos)
#define GPIO_INTRAWSTAT_PIN18_Pos 18
#define GPIO_INTRAWSTAT_PIN18_Msk (0x01 << GPIO_INTRAWSTAT_PIN18_Pos)
#define GPIO_INTRAWSTAT_PIN19_Pos 19
#define GPIO_INTRAWSTAT_PIN19_Msk (0x01 << GPIO_INTRAWSTAT_PIN19_Pos)
#define GPIO_INTRAWSTAT_PIN20_Pos 20
#define GPIO_INTRAWSTAT_PIN20_Msk (0x01 << GPIO_INTRAWSTAT_PIN20_Pos)
#define GPIO_INTRAWSTAT_PIN21_Pos 21
#define GPIO_INTRAWSTAT_PIN21_Msk (0x01 << GPIO_INTRAWSTAT_PIN21_Pos)
#define GPIO_INTRAWSTAT_PIN22_Pos 22
#define GPIO_INTRAWSTAT_PIN22_Msk (0x01 << GPIO_INTRAWSTAT_PIN22_Pos)
#define GPIO_INTRAWSTAT_PIN23_Pos 23
#define GPIO_INTRAWSTAT_PIN23_Msk (0x01 << GPIO_INTRAWSTAT_PIN23_Pos)

#define GPIO_INTSTAT_PIN0_Pos 0
#define GPIO_INTSTAT_PIN0_Msk (0x01 << GPIO_INTSTAT_PIN0_Pos)
#define GPIO_INTSTAT_PIN1_Pos 1
#define GPIO_INTSTAT_PIN1_Msk (0x01 << GPIO_INTSTAT_PIN1_Pos)
#define GPIO_INTSTAT_PIN2_Pos 2
#define GPIO_INTSTAT_PIN2_Msk (0x01 << GPIO_INTSTAT_PIN2_Pos)
#define GPIO_INTSTAT_PIN3_Pos 3
#define GPIO_INTSTAT_PIN3_Msk (0x01 << GPIO_INTSTAT_PIN3_Pos)
#define GPIO_INTSTAT_PIN4_Pos 4
#define GPIO_INTSTAT_PIN4_Msk (0x01 << GPIO_INTSTAT_PIN4_Pos)
#define GPIO_INTSTAT_PIN5_Pos 5
#define GPIO_INTSTAT_PIN5_Msk (0x01 << GPIO_INTSTAT_PIN5_Pos)
#define GPIO_INTSTAT_PIN6_Pos 6
#define GPIO_INTSTAT_PIN6_Msk (0x01 << GPIO_INTSTAT_PIN6_Pos)
#define GPIO_INTSTAT_PIN7_Pos 7
#define GPIO_INTSTAT_PIN7_Msk (0x01 << GPIO_INTSTAT_PIN7_Pos)
#define GPIO_INTSTAT_PIN8_Pos 8
#define GPIO_INTSTAT_PIN8_Msk (0x01 << GPIO_INTSTAT_PIN8_Pos)
#define GPIO_INTSTAT_PIN9_Pos 9
#define GPIO_INTSTAT_PIN9_Msk (0x01 << GPIO_INTSTAT_PIN9_Pos)
#define GPIO_INTSTAT_PIN10_Pos 10
#define GPIO_INTSTAT_PIN10_Msk (0x01 << GPIO_INTSTAT_PIN10_Pos)
#define GPIO_INTSTAT_PIN11_Pos 11
#define GPIO_INTSTAT_PIN11_Msk (0x01 << GPIO_INTSTAT_PIN11_Pos)
#define GPIO_INTSTAT_PIN12_Pos 12
#define GPIO_INTSTAT_PIN12_Msk (0x01 << GPIO_INTSTAT_PIN12_Pos)
#define GPIO_INTSTAT_PIN13_Pos 13
#define GPIO_INTSTAT_PIN13_Msk (0x01 << GPIO_INTSTAT_PIN13_Pos)
#define GPIO_INTSTAT_PIN14_Pos 14
#define GPIO_INTSTAT_PIN14_Msk (0x01 << GPIO_INTSTAT_PIN14_Pos)
#define GPIO_INTSTAT_PIN15_Pos 15
#define GPIO_INTSTAT_PIN15_Msk (0x01 << GPIO_INTSTAT_PIN15_Pos)
#define GPIO_INTSTAT_PIN16_Pos 16
#define GPIO_INTSTAT_PIN16_Msk (0x01 << GPIO_INTSTAT_PIN16_Pos)
#define GPIO_INTSTAT_PIN17_Pos 17
#define GPIO_INTSTAT_PIN17_Msk (0x01 << GPIO_INTSTAT_PIN17_Pos)
#define GPIO_INTSTAT_PIN18_Pos 18
#define GPIO_INTSTAT_PIN18_Msk (0x01 << GPIO_INTSTAT_PIN18_Pos)
#define GPIO_INTSTAT_PIN19_Pos 19
#define GPIO_INTSTAT_PIN19_Msk (0x01 << GPIO_INTSTAT_PIN19_Pos)
#define GPIO_INTSTAT_PIN20_Pos 20
#define GPIO_INTSTAT_PIN20_Msk (0x01 << GPIO_INTSTAT_PIN20_Pos)
#define GPIO_INTSTAT_PIN21_Pos 21
#define GPIO_INTSTAT_PIN21_Msk (0x01 << GPIO_INTSTAT_PIN21_Pos)
#define GPIO_INTSTAT_PIN22_Pos 22
#define GPIO_INTSTAT_PIN22_Msk (0x01 << GPIO_INTSTAT_PIN22_Pos)
#define GPIO_INTSTAT_PIN23_Pos 23
#define GPIO_INTSTAT_PIN23_Msk (0x01 << GPIO_INTSTAT_PIN23_Pos)

#define GPIO_INTCLR_PIN0_Pos 0
#define GPIO_INTCLR_PIN0_Msk (0x01 << GPIO_INTCLR_PIN0_Pos)
#define GPIO_INTCLR_PIN1_Pos 1
#define GPIO_INTCLR_PIN1_Msk (0x01 << GPIO_INTCLR_PIN1_Pos)
#define GPIO_INTCLR_PIN2_Pos 2
#define GPIO_INTCLR_PIN2_Msk (0x01 << GPIO_INTCLR_PIN2_Pos)
#define GPIO_INTCLR_PIN3_Pos 3
#define GPIO_INTCLR_PIN3_Msk (0x01 << GPIO_INTCLR_PIN3_Pos)
#define GPIO_INTCLR_PIN4_Pos 4
#define GPIO_INTCLR_PIN4_Msk (0x01 << GPIO_INTCLR_PIN4_Pos)
#define GPIO_INTCLR_PIN5_Pos 5
#define GPIO_INTCLR_PIN5_Msk (0x01 << GPIO_INTCLR_PIN5_Pos)
#define GPIO_INTCLR_PIN6_Pos 6
#define GPIO_INTCLR_PIN6_Msk (0x01 << GPIO_INTCLR_PIN6_Pos)
#define GPIO_INTCLR_PIN7_Pos 7
#define GPIO_INTCLR_PIN7_Msk (0x01 << GPIO_INTCLR_PIN7_Pos)
#define GPIO_INTCLR_PIN8_Pos 8
#define GPIO_INTCLR_PIN8_Msk (0x01 << GPIO_INTCLR_PIN8_Pos)
#define GPIO_INTCLR_PIN9_Pos 9
#define GPIO_INTCLR_PIN9_Msk (0x01 << GPIO_INTCLR_PIN9_Pos)
#define GPIO_INTCLR_PIN10_Pos 10
#define GPIO_INTCLR_PIN10_Msk (0x01 << GPIO_INTCLR_PIN10_Pos)
#define GPIO_INTCLR_PIN11_Pos 11
#define GPIO_INTCLR_PIN11_Msk (0x01 << GPIO_INTCLR_PIN11_Pos)
#define GPIO_INTCLR_PIN12_Pos 12
#define GPIO_INTCLR_PIN12_Msk (0x01 << GPIO_INTCLR_PIN12_Pos)
#define GPIO_INTCLR_PIN13_Pos 13
#define GPIO_INTCLR_PIN13_Msk (0x01 << GPIO_INTCLR_PIN13_Pos)
#define GPIO_INTCLR_PIN14_Pos 14
#define GPIO_INTCLR_PIN14_Msk (0x01 << GPIO_INTCLR_PIN14_Pos)
#define GPIO_INTCLR_PIN15_Pos 15
#define GPIO_INTCLR_PIN15_Msk (0x01 << GPIO_INTCLR_PIN15_Pos)
#define GPIO_INTCLR_PIN16_Pos 16
#define GPIO_INTCLR_PIN16_Msk (0x01 << GPIO_INTCLR_PIN16_Pos)
#define GPIO_INTCLR_PIN17_Pos 17
#define GPIO_INTCLR_PIN17_Msk (0x01 << GPIO_INTCLR_PIN17_Pos)
#define GPIO_INTCLR_PIN18_Pos 18
#define GPIO_INTCLR_PIN18_Msk (0x01 << GPIO_INTCLR_PIN18_Pos)
#define GPIO_INTCLR_PIN19_Pos 19
#define GPIO_INTCLR_PIN19_Msk (0x01 << GPIO_INTCLR_PIN19_Pos)
#define GPIO_INTCLR_PIN20_Pos 20
#define GPIO_INTCLR_PIN20_Msk (0x01 << GPIO_INTCLR_PIN20_Pos)
#define GPIO_INTCLR_PIN21_Pos 21
#define GPIO_INTCLR_PIN21_Msk (0x01 << GPIO_INTCLR_PIN21_Pos)
#define GPIO_INTCLR_PIN22_Pos 22
#define GPIO_INTCLR_PIN22_Msk (0x01 << GPIO_INTCLR_PIN22_Pos)
#define GPIO_INTCLR_PIN23_Pos 23
#define GPIO_INTCLR_PIN23_Msk (0x01 << GPIO_INTCLR_PIN23_Pos)

typedef struct
{
    __IO uint32_t LDVAL; //定时器加载值，使能后定时器从此数值开始向下递减计数

    __I uint32_t CVAL; //定时器当前值，LDVAL-CVAL 可计算出计时时长

    __IO uint32_t CTRL;
} TIMR_TypeDef;

#define TIMR_CTRL_EN_Pos 0 //此位赋1导致TIMR从LDVAL开始向下递减计数
#define TIMR_CTRL_EN_Msk (0x01 << TIMR_CTRL_EN_Pos)
#define TIMR_CTRL_CLKSRC_Pos 1 //时钟源：0 内部系统时钟	1 外部引脚脉冲计数
#define TIMR_CTRL_CLKSRC_Msk (0x01 << TIMR_CTRL_CLKSRC_Pos)
#define TIMR_CTRL_CASCADE_Pos 2 //1 TIMRx的计数时钟为TIMRx-1的溢出信号
#define TIMR_CTRL_CASCADE_Msk (0x01 << TIMR_CTRL_CASCADE_Pos)

typedef struct
{
    __IO uint32_t PCTRL; //Pulse Control，脉宽测量模块控制寄存器

    __I uint32_t PCVAL; //脉宽测量定时器当前值

    uint32_t RESERVED[2];

    __IO uint32_t IE;

    __IO uint32_t IF;

    __IO uint32_t HALT;
} TIMRG_TypeDef;

#define TIMRG_PCTRL_EN_Pos 0 //开始测量脉宽，脉宽内32位计数器从0开始向上计数
#define TIMRG_PCTRL_EN_Msk (0x01 << TIMRG_PCTRL_EN_Pos)
#define TIMRG_PCTRL_HIGH_Pos 1 //0 测量低电平长度	1 测量高电平长度
#define TIMRG_PCTRL_HIGH_Msk (0x01 << TIMRG_PCTRL_HIGH_Pos)
#define TIMRG_PCTRL_CLKSRC_Pos 2 //时钟源：0 内部系统时钟	1 脉宽测量模块变成一个计数器，不再具有脉宽测量功能
#define TIMRG_PCTRL_CLKSRC_Msk (0x01 << TIMRG_PCTRL_CLKSRC_Pos)

#define TIMRG_IE_TIMR0_Pos 0
#define TIMRG_IE_TIMR0_Msk (0x01 << TIMRG_IE_TIMR0_Pos)
#define TIMRG_IE_TIMR1_Pos 1
#define TIMRG_IE_TIMR1_Msk (0x01 << TIMRG_IE_TIMR1_Pos)
#define TIMRG_IE_TIMR2_Pos 2
#define TIMRG_IE_TIMR2_Msk (0x01 << TIMRG_IE_TIMR2_Pos)
#define TIMRG_IE_TIMR3_Pos 3
#define TIMRG_IE_TIMR3_Msk (0x01 << TIMRG_IE_TIMR3_Pos)
#define TIMRG_IE_TIMR4_Pos 4
#define TIMRG_IE_TIMR4_Msk (0x01 << TIMRG_IE_TIMR4_Pos)
#define TIMRG_IE_TIMR5_Pos 5
#define TIMRG_IE_TIMR5_Msk (0x01 << TIMRG_IE_TIMR5_Pos)
#define TIMRG_IE_PULSE_Pos 16
#define TIMRG_IE_PULSE_Msk (0x01 << TIMRG_IE_PULSE_Pos)

#define TIMRG_IF_TIMR0_Pos 0 //写1清零
#define TIMRG_IF_TIMR0_Msk (0x01 << TIMRG_IF_TIMR0_Pos)
#define TIMRG_IF_TIMR1_Pos 1
#define TIMRG_IF_TIMR1_Msk (0x01 << TIMRG_IF_TIMR1_Pos)
#define TIMRG_IF_TIMR2_Pos 2
#define TIMRG_IF_TIMR2_Msk (0x01 << TIMRG_IF_TIMR2_Pos)
#define TIMRG_IF_TIMR3_Pos 3
#define TIMRG_IF_TIMR3_Msk (0x01 << TIMRG_IF_TIMR3_Pos)
#define TIMRG_IF_TIMR4_Pos 4
#define TIMRG_IF_TIMR4_Msk (0x01 << TIMRG_IF_TIMR4_Pos)
#define TIMRG_IF_TIMR5_Pos 5
#define TIMRG_IF_TIMR5_Msk (0x01 << TIMRG_IF_TIMR5_Pos)
#define TIMRG_IF_PULSE_Pos 16
#define TIMRG_IF_PULSE_Msk (0x01 << TIMRG_IF_PULSE_Pos)

#define TIMRG_HALT_TIMR0_Pos 0 //1 暂停计数
#define TIMRG_HALT_TIMR0_Msk (0x01 << TIMRG_HALT_TIMR0_Pos)
#define TIMRG_HALT_TIMR1_Pos 1
#define TIMRG_HALT_TIMR1_Msk (0x01 << TIMRG_HALT_TIMR1_Pos)
#define TIMRG_HALT_TIMR2_Pos 2
#define TIMRG_HALT_TIMR2_Msk (0x01 << TIMRG_HALT_TIMR2_Pos)
#define TIMRG_HALT_TIMR3_Pos 3
#define TIMRG_HALT_TIMR3_Msk (0x01 << TIMRG_HALT_TIMR3_Pos)
#define TIMRG_HALT_TIMR4_Pos 4
#define TIMRG_HALT_TIMR4_Msk (0x01 << TIMRG_HALT_TIMR4_Pos)
#define TIMRG_HALT_TIMR5_Pos 5
#define TIMRG_HALT_TIMR5_Msk (0x01 << TIMRG_HALT_TIMR5_Pos)

typedef struct
{
    __IO uint32_t DATA;

    __IO uint32_t CTRL;

    __IO uint32_t BAUD;

    __IO uint32_t FIFO;

    __IO uint32_t LINCR;

    union {
        __IO uint32_t CTSCR;

        __IO uint32_t RTSCR;
    };
} UART_TypeDef;

#define UART_DATA_DATA_Pos 0
#define UART_DATA_DATA_Msk (0x1FF << UART_DATA_DATA_Pos)
#define UART_DATA_VALID_Pos 9 //当DATA字段有有效的接收数据时，该位硬件置1，读取数据后自动清零
#define UART_DATA_VALID_Msk (0x01 << UART_DATA_VALID_Pos)
#define UART_DATA_PAERR_Pos 10 //Parity Error
#define UART_DATA_PAERR_Msk (0x01 << UART_DATA_PAERR_Pos)

#define UART_CTRL_TXIDLE_Pos 0 //TX IDLE: 0 正在发送数据	1 空闲状态，没有数据发送
#define UART_CTRL_TXIDLE_Msk (0x01 << UART_CTRL_TXIDLE_Pos)
#define UART_CTRL_TXFF_Pos 1 //TX FIFO Full
#define UART_CTRL_TXFF_Msk (0x01 << UART_CTRL_TXFF_Pos)
#define UART_CTRL_TXIE_Pos 2 //TX 中断使能: 1 TX FF 中数据少于设定个数时产生中断
#define UART_CTRL_TXIE_Msk (0x01 << UART_CTRL_TXIE_Pos)
#define UART_CTRL_RXNE_Pos 3 //RX FIFO Not Empty
#define UART_CTRL_RXNE_Msk (0x01 << UART_CTRL_RXNE_Pos)
#define UART_CTRL_RXIE_Pos 4 //RX 中断使能: 1 RX FF 中数据达到设定个数时产生中断
#define UART_CTRL_RXIE_Msk (0x01 << UART_CTRL_RXIE_Pos)
#define UART_CTRL_RXOV_Pos 5 //RX FIFO Overflow，写1清零
#define UART_CTRL_RXOV_Msk (0x01 << UART_CTRL_RXOV_Pos)
#define UART_CTRL_TXDOIE_Pos 6 //TX Done 中断使能，发送FIFO空且发送发送移位寄存器已将最后一位发送出去
#define UART_CTRL_TXDOIE_Msk (0x01 << UART_CTRL_TXDOIE_Pos)
#define UART_CTRL_EN_Pos 9
#define UART_CTRL_EN_Msk (0x01 << UART_CTRL_EN_Pos)
#define UART_CTRL_LOOP_Pos 10
#define UART_CTRL_LOOP_Msk (0x01 << UART_CTRL_LOOP_Pos)
#define UART_CTRL_BAUDEN_Pos 13 //必须写1
#define UART_CTRL_BAUDEN_Msk (0x01 << UART_CTRL_BAUDEN_Pos)
#define UART_CTRL_TOIE_Pos 14 //TimeOut 中断使能，接收到上个字符后，超过 TOTIME/BAUDRAUD 秒没有接收到新的数据
#define UART_CTRL_TOIE_Msk (0x01 << UART_CTRL_TOIE_Pos)
#define UART_CTRL_BRKDET_Pos 15 //LIN Break Detect，检测到LIN Break，即RX线上检测到连续11位低电平
#define UART_CTRL_BRKDET_Msk (0x01 << UART_CTRL_BRKDET_Pos)
#define UART_CTRL_BRKIE_Pos 16 //LIN Break Detect 中断使能
#define UART_CTRL_BRKIE_Msk (0x01 << UART_CTRL_BRKIE_Pos)
#define UART_CTRL_GENBRK_Pos 17 //Generate LIN Break，发送LIN Break
#define UART_CTRL_GENBRK_Msk (0x01 << UART_CTRL_GENBRK_Pos)
#define UART_CTRL_DATA9b_Pos 18 //1 9位数据位    0 8位数据位
#define UART_CTRL_DATA9b_Msk (0x01 << UART_CTRL_DATA9b_Pos)
#define UART_CTRL_PARITY_Pos 19 //000 无校验    001 奇校验   011 偶校验   101 固定为1    111 固定为0
#define UART_CTRL_PARITY_Msk (0x07 << UART_CTRL_PARITY_Pos)
#define UART_CTRL_STOP2b_Pos 22 //1 2位停止位    0 1位停止位
#define UART_CTRL_STOP2b_Msk (0x03 << UART_CTRL_STOP2b_Pos)
#define UART_CTRL_TOTIME_Pos 24 //TimeOut 时长 = TOTIME/(BAUDRAUD/10) 秒
#define UART_CTRL_TOTIME_Msk (0xFFu << UART_CTRL_TOTIME_Pos)

#define UART_BAUD_BAUD_Pos 0 //串口波特率 = SYS_Freq/16/BAUD - 1
#define UART_BAUD_BAUD_Msk (0x3FFF << UART_BAUD_BAUD_Pos)
#define UART_BAUD_TXD_Pos 14 //通过此位可直接读取串口TXD引脚上的电平
#define UART_BAUD_TXD_Msk (0x01 << UART_BAUD_TXD_Pos)
#define UART_BAUD_RXD_Pos 15 //通过此位可直接读取串口RXD引脚上的电平
#define UART_BAUD_RXD_Msk (0x01 << UART_BAUD_RXD_Pos)
#define UART_BAUD_RXTOIF_Pos 16 //接收&超时的中断标志 = RXIF | TOIF
#define UART_BAUD_RXTOIF_Msk (0x01 << UART_BAUD_RXTOIF_Pos)
#define UART_BAUD_TXIF_Pos 17 //发送中断标志 = TXTHRF & TXIE
#define UART_BAUD_TXIF_Msk (0x01 << UART_BAUD_TXIF_Pos)
#define UART_BAUD_BRKIF_Pos 18 //LIN Break Detect 中断标志，检测到LIN Break时若BRKIE=1，此位由硬件置位
#define UART_BAUD_BRKIF_Msk (0x01 << UART_BAUD_BRKIF_Pos)
#define UART_BAUD_RXTHRF_Pos 19 //RX FIFO Threshold Flag，RX FIFO中数据达到设定个数（RXLVL >= RXTHR）时硬件置1
#define UART_BAUD_RXTHRF_Msk (0x01 << UART_BAUD_RXTHRF_Pos)
#define UART_BAUD_TXTHRF_Pos 20 //TX FIFO Threshold Flag，TX FIFO中数据少于设定个数（TXLVL <= TXTHR）时硬件置1
#define UART_BAUD_TXTHRF_Msk (0x01 << UART_BAUD_TXTHRF_Pos)
#define UART_BAUD_TOIF_Pos 21 //TimeOut 中断标志，超过 TOTIME/BAUDRAUD 秒没有接收到新的数据时若TOIE=1，此位由硬件置位
#define UART_BAUD_TOIF_Msk (0x01 << UART_BAUD_TOIF_Pos)
#define UART_BAUD_RXIF_Pos 22 //接收中断标志 = RXTHRF & RXIE
#define UART_BAUD_RXIF_Msk (0x01 << UART_BAUD_RXIF_Pos)
#define UART_BAUD_ABREN_Pos 23 //Auto Baudrate Enable，写1启动自动波特率校准，完成后自动清零
#define UART_BAUD_ABREN_Msk (0x01 << UART_BAUD_ABREN_Pos)
#define UART_BAUD_ABRBIT_Pos 24 //Auto Baudrate Bit，用于计算波特率的检测位长，0 1位，通过测起始位           脉宽计算波特率，要求发送端发送0xFF \
                                //                                             1 2位，通过测起始位加1位数据位脉宽计算波特率，要求发送端发送0xFE          \
                                //                                             1 4位，通过测起始位加3位数据位脉宽计算波特率，要求发送端发送0xF8          \
                                //                                             1 8位，通过测起始位加7位数据位脉宽计算波特率，要求发送端发送0x80
#define UART_BAUD_ABRBIT_Msk (0x03 << UART_BAUD_ABRBIT_Pos)
#define UART_BAUD_ABRERR_Pos 26 //Auto Baudrate Error，0 自动波特率校准成功     1 自动波特率校准失败
#define UART_BAUD_ABRERR_Msk (0x01 << UART_BAUD_ABRERR_Pos)
#define UART_BAUD_TXDOIF_Pos 27 //TX Done 中断标志，发送FIFO空且发送发送移位寄存器已将最后一位发送出去
#define UART_BAUD_TXDOIF_Msk (0x01 << UART_BAUD_TXDOIF_Pos)

#define UART_FIFO_RXLVL_Pos 0 //RX FIFO Level，RX FIFO 中字符个数
#define UART_FIFO_RXLVL_Msk (0xFF << UART_FIFO_RXLVL_Pos)
#define UART_FIFO_TXLVL_Pos 8 //TX FIFO Level，TX FIFO 中字符个数
#define UART_FIFO_TXLVL_Msk (0xFF << UART_FIFO_TXLVL_Pos)
#define UART_FIFO_RXTHR_Pos 16 //RX FIFO Threshold，RX中断触发门限，中断使能时 RXLVL >= RXTHR 触发RX中断
#define UART_FIFO_RXTHR_Msk (0xFF << UART_FIFO_RXTHR_Pos)
#define UART_FIFO_TXTHR_Pos 24 //TX FIFO Threshold，TX中断触发门限，中断使能时 TXLVL <= TXTHR 触发TX中断
#define UART_FIFO_TXTHR_Msk (0xFFu << UART_FIFO_TXTHR_Pos)

#define UART_LINCR_BRKDETIE_Pos 0 //检测到LIN Break中断使能
#define UART_LINCR_BRKDETIE_Msk (0x01 << UART_LINCR_BRKDETIE_Pos)
#define UART_LINCR_BRKDETIF_Pos 1 //检测到LIN Break中断状态
#define UART_LINCR_BRKDETIF_Msk (0x01 << UART_LINCR_BRKDETIF_Pos)
#define UART_LINCR_GENBRKIE_Pos 2 //发送LIN Break完成中断使能
#define UART_LINCR_GENBRKIE_Msk (0x01 << UART_LINCR_GENBRKIE_Pos)
#define UART_LINCR_GENBRKIF_Pos 3 //发送LIN Break完成中断状态
#define UART_LINCR_GENBRKIF_Msk (0x01 << UART_LINCR_GENBRKIF_Pos)
#define UART_LINCR_GENBRK_Pos 4 //发送LIN Break，发送完成自动清零
#define UART_LINCR_GENBRK_Msk (0x01 << UART_LINCR_GENBRK_Pos)

#define UART_CTSCR_EN_Pos 0 //CTS流控使能
#define UART_CTSCR_EN_Msk (0x01 << UART_CTSCR_EN_Pos)
#define UART_CTSCR_POL_Pos 2 //CTS信号极性，0 低有效，CTS输入为低表示可以发送数据
#define UART_CTSCR_POL_Msk (0x01 << UART_CTSCR_POL_Pos)
#define UART_CTSCR_STAT_Pos 7 //CTS信号的当前状态
#define UART_CTSCR_STAT_Msk (0x01 << UART_CTSCR_STAT_Pos)

#define UART_RTSCR_EN_Pos 1 //RTS流控使能
#define UART_RTSCR_EN_Msk (0x01 << UART_RTSCR_EN_Pos)
#define UART_RTSCR_POL_Pos 3 //RTS信号极性    0 低有效，RTS输入为低表示可以接收数据
#define UART_RTSCR_POL_Msk (0x01 << UART_RTSCR_POL_Pos)
#define UART_RTSCR_THR_Pos 4 //RTS流控的触发阈值    0 1字节    1 2字节    2 4字节    3 6字节
#define UART_RTSCR_THR_Msk (0x07 << UART_RTSCR_THR_Pos)
#define UART_RTSCR_STAT_Pos 8 //RTS信号的当前状态
#define UART_RTSCR_STAT_Msk (0x01 << UART_RTSCR_STAT_Pos)

typedef struct
{
    __IO uint32_t CTRL;

    __IO uint32_t DATA;

    __IO uint32_t STAT;

    __IO uint32_t IE;

    __IO uint32_t IF;
} SPI_TypeDef;

#define SPI_CTRL_CLKDIV_Pos 0 //Clock Divider, SPI工作时钟 = SYS_Freq/pow(2, CLKDIV+2)
#define SPI_CTRL_CLKDIV_Msk (0x07 << SPI_CTRL_CLKDIV_Pos)
#define SPI_CTRL_EN_Pos 3
#define SPI_CTRL_EN_Msk (0x01 << SPI_CTRL_EN_Pos)
#define SPI_CTRL_SIZE_Pos 4 //Data Size Select, 取值3--15，表示4--16位
#define SPI_CTRL_SIZE_Msk (0x0F << SPI_CTRL_SIZE_Pos)
#define SPI_CTRL_CPHA_Pos 8 //0 在SCLK的第一个跳变沿采样数据	1 在SCLK的第二个跳变沿采样数据
#define SPI_CTRL_CPHA_Msk (0x01 << SPI_CTRL_CPHA_Pos)
#define SPI_CTRL_CPOL_Pos 9 //0 空闲状态下SCLK为低电平		  1 空闲状态下SCLK为高电平
#define SPI_CTRL_CPOL_Msk (0x01 << SPI_CTRL_CPOL_Pos)
#define SPI_CTRL_FFS_Pos 10 //Frame Format Select, 0 SPI	1 TI SSI	2 SPI	3 SPI
#define SPI_CTRL_FFS_Msk (0x03 << SPI_CTRL_FFS_Pos)
#define SPI_CTRL_MSTR_Pos 12 //Master, 1 主模式	0 从模式
#define SPI_CTRL_MSTR_Msk (0x01 << SPI_CTRL_MSTR_Pos)
#define SPI_CTRL_FAST_Pos 13 //1 SPI工作时钟 = SYS_Freq/2    0 SPI工作时钟由SPI->CTRL.CLKDIV设置
#define SPI_CTRL_FAST_Msk (0x01 << SPI_CTRL_FAST_Pos)
#define SPI_CTRL_FILTE_Pos 16 //1 对SPI输入信号进行去抖操作    0 对SPI输入信号不进行去抖操作
#define SPI_CTRL_FILTE_Msk (0x01 << SPI_CTRL_FILTE_Pos)
#define SPI_CTRL_SSN_H_Pos 17 //0 传输过程中SSN始终为0    	 1 传输过程中每字符之间会将SSN拉高半个SCLK周期
#define SPI_CTRL_SSN_H_Msk (0x01 << SPI_CTRL_SSN_H_Pos)
#define SPI_CTRL_TFCLR_Pos 24 //TX FIFO Clear
#define SPI_CTRL_TFCLR_Msk (0x01 << SPI_CTRL_TFCLR_Pos)
#define SPI_CTRL_RFCLR_Pos 25 //RX FIFO Clear
#define SPI_CTRL_RFCLR_Msk (0x01 << SPI_CTRL_RFCLR_Pos)

#define SPI_STAT_WTC_Pos 0 //Word Transmit Complete，每传输完成一个数据字由硬件置1，软件写1清零
#define SPI_STAT_WTC_Msk (0x01 << SPI_STAT_WTC_Pos)
#define SPI_STAT_TFE_Pos 1 //发送FIFO Empty
#define SPI_STAT_TFE_Msk (0x01 << SPI_STAT_TFE_Pos)
#define SPI_STAT_TFNF_Pos 2 //发送FIFO Not Full
#define SPI_STAT_TFNF_Msk (0x01 << SPI_STAT_TFNF_Pos)
#define SPI_STAT_RFNE_Pos 3 //接收FIFO Not Empty
#define SPI_STAT_RFNE_Msk (0x01 << SPI_STAT_RFNE_Pos)
#define SPI_STAT_RFF_Pos 4 //接收FIFO Full
#define SPI_STAT_RFF_Msk (0x01 << SPI_STAT_RFF_Pos)
#define SPI_STAT_RFOVF_Pos 5 //接收FIFO Overflow
#define SPI_STAT_RFOVF_Msk (0x01 << SPI_STAT_RFOVF_Pos)
#define SPI_STAT_TFLVL_Pos 6 //发送FIFO中数据个数， 0 TFNF=0时表示FIFO内有8个数据，TFNF=1时表示FIFO内有0个数据	1--7 FIFO内有1--7个数据
#define SPI_STAT_TFLVL_Msk (0x07 << SPI_STAT_TFLVL_Pos)
#define SPI_STAT_RFLVL_Pos 9 //接收FIFO中数据个数， 0 RFF=1时表示FIFO内有8个数据， RFF=0时表示FIFO内有0个数据	1--7 FIFO内有1--7个数据
#define SPI_STAT_RFLVL_Msk (0x07 << SPI_STAT_RFLVL_Pos)
#define SPI_STAT_BUSY_Pos 15
#define SPI_STAT_BUSY_Msk (0x01 << SPI_STAT_BUSY_Pos)

#define SPI_IE_RFOVF_Pos 0
#define SPI_IE_RFOVF_Msk (0x01 << SPI_IE_RFOVF_Pos)
#define SPI_IE_RFF_Pos 1
#define SPI_IE_RFF_Msk (0x01 << SPI_IE_RFF_Pos)
#define SPI_IE_RFHF_Pos 2
#define SPI_IE_RFHF_Msk (0x01 << SPI_IE_RFHF_Pos)
#define SPI_IE_TFE_Pos 3
#define SPI_IE_TFE_Msk (0x01 << SPI_IE_TFE_Pos)
#define SPI_IE_TFHF_Pos 4
#define SPI_IE_TFHF_Msk (0x01 << SPI_IE_TFHF_Pos)
#define SPI_IE_WTC_Pos 8 //Word Transmit Complete
#define SPI_IE_WTC_Msk (0x01 << SPI_IE_WTC_Pos)
#define SPI_IE_FTC_Pos 9 //Frame Transmit Complete
#define SPI_IE_FTC_Msk (0x01 << SPI_IE_FTC_Pos)

#define SPI_IF_RFOVF_Pos 0 //写1清零
#define SPI_IF_RFOVF_Msk (0x01 << SPI_IF_RFOVF_Pos)
#define SPI_IF_RFF_Pos 1
#define SPI_IF_RFF_Msk (0x01 << SPI_IF_RFF_Pos)
#define SPI_IF_RFHF_Pos 2
#define SPI_IF_RFHF_Msk (0x01 << SPI_IF_RFHF_Pos)
#define SPI_IF_TFE_Pos 3
#define SPI_IF_TFE_Msk (0x01 << SPI_IF_TFE_Pos)
#define SPI_IF_TFHF_Pos 4
#define SPI_IF_TFHF_Msk (0x01 << SPI_IF_TFHF_Pos)
#define SPI_IF_WTC_Pos 8 //Word Transmit Complete，每传输完成一个数据字由硬件置1
#define SPI_IF_WTC_Msk (0x01 << SPI_IF_WTC_Pos)
#define SPI_IF_FTC_Pos 9 //Frame Transmit Complete，WTC置位时若TX FIFO是空的，则FTC置位
#define SPI_IF_FTC_Msk (0x01 << SPI_IF_FTC_Pos)

typedef struct
{
    __IO uint32_t CLKDIV; //[15:0] 须将内部工作频率分到SCL频率的5倍，即CLKDIV = SYS_Freq/5/SCL_Freq - 1

    __IO uint32_t CTRL;

    __IO uint32_t MSTDAT;

    __IO uint32_t MSTCMD;

    __IO uint32_t SLVCR;

    __IO uint32_t SLVIF;

    __IO uint32_t SLVTX;

    __IO uint32_t SLVRX;
} I2C_TypeDef;

#define I2C_CTRL_MSTIE_Pos 6
#define I2C_CTRL_MSTIE_Msk (0x01 << I2C_CTRL_MSTIE_Pos)
#define I2C_CTRL_EN_Pos 7
#define I2C_CTRL_EN_Msk (0x01 << I2C_CTRL_EN_Pos)

#define I2C_MSTCMD_IF_Pos 0 //1 有等待处理的中断，写1清零	有两种情况下此位硬件置位：1、一个字节传输完成  2、总线访问权丢失
#define I2C_MSTCMD_IF_Msk (0x01 << I2C_MSTCMD_IF_Pos)
#define I2C_MSTCMD_TIP_Pos 1 //Transmission In Process
#define I2C_MSTCMD_TIP_Msk (0x01 << I2C_MSTCMD_TIP_Pos)
#define I2C_MSTCMD_ACK_Pos 3 //接收模式下，0 向发送端反馈ACK	1 向发送端反馈NACK
#define I2C_MSTCMD_ACK_Msk (0x01 << I2C_MSTCMD_ACK_Pos)
#define I2C_MSTCMD_WR_Pos 4 //	  向Slave写数据时，把这一位写1，自动清零
#define I2C_MSTCMD_WR_Msk (0x01 << I2C_MSTCMD_WR_Pos)
#define I2C_MSTCMD_RD_Pos 5 //写：从Slave读数据时，把这一位写1，自动清零	读：当I2C模块失去总线的访问权时硬件置1
#define I2C_MSTCMD_RD_Msk (0x01 << I2C_MSTCMD_RD_Pos)
#define I2C_MSTCMD_BUSY_Pos 6 //读：当检测到START之后，这一位变1；当检测到STOP之后，这一位变0
#define I2C_MSTCMD_BUSY_Msk (0x01 << I2C_MSTCMD_BUSY_Pos)
#define I2C_MSTCMD_STO_Pos 6 //写：产生STOP，自动清零
#define I2C_MSTCMD_STO_Msk (0x01 << I2C_MSTCMD_STO_Pos)
#define I2C_MSTCMD_RXACK_Pos 7 //读：接收到的Slave的ACK位，0 收到ACK	1 收到NACK
#define I2C_MSTCMD_RXACK_Msk (0x01 << I2C_MSTCMD_RXACK_Pos)
#define I2C_MSTCMD_STA_Pos 7 //写：产生START，自动清零
#define I2C_MSTCMD_STA_Msk (0x01 << I2C_MSTCMD_STA_Pos)

#define I2C_SLVCR_IM_RXEND_Pos 0 //接收完成中断禁止
#define I2C_SLVCR_IM_RXEND_Msk (0x01 << I2C_SLVCR_IM_RXEND_Pos)
#define I2C_SLVCR_IM_TXEND_Pos 1 //发送完成中断禁止
#define I2C_SLVCR_IM_TXEND_Msk (0x01 << I2C_SLVCR_IM_TXEND_Pos)
#define I2C_SLVCR_IM_STADET_Pos 2 //检测到起始中断禁止
#define I2C_SLVCR_IM_STADET_Msk (0x01 << I2C_SLVCR_IM_STADET_Pos)
#define I2C_SLVCR_IM_STODET_Pos 3 //检测到停止中断禁止
#define I2C_SLVCR_IM_STODET_Msk (0x01 << I2C_SLVCR_IM_STODET_Pos)
#define I2C_SLVCR_IM_RDREQ_Pos 4 //接收到读请求中断禁止
#define I2C_SLVCR_IM_RDREQ_Msk (0x01 << I2C_SLVCR_IM_RDREQ_Pos)
#define I2C_SLVCR_IM_WRREQ_Pos 5 //接收到写请求中断禁止
#define I2C_SLVCR_IM_WRREQ_Msk (0x01 << I2C_SLVCR_IM_WRREQ_Pos)
#define I2C_SLVCR_ADDR7b_Pos 16 //1 7位地址模式    0 10位地址模式
#define I2C_SLVCR_ADDR7b_Msk (0x01 << I2C_SLVCR_ADDR7b_Pos)
#define I2C_SLVCR_ACK_Pos 17 //1 应答ACK    0 应答NACK
#define I2C_SLVCR_ACK_Msk (0x01 << I2C_SLVCR_ACK_Pos)
#define I2C_SLVCR_SLAVE_Pos 18 //1 从机模式   0 主机模式
#define I2C_SLVCR_SLAVE_Msk (0x01 << I2C_SLVCR_SLAVE_Pos)
#define I2C_SLVCR_DEBOUNCE_Pos 19 //去抖动使能
#define I2C_SLVCR_DEBOUNCE_Msk (0x01 << I2C_SLVCR_DEBOUNCE_Pos)
#define I2C_SLVCR_ADDR_Pos 20 //从机地址
#define I2C_SLVCR_ADDR_Msk (0x3FF << I2C_SLVCR_ADDR_Pos)

#define I2C_SLVIF_RXEND_Pos 0 //接收完成中断标志，写1清零
#define I2C_SLVIF_RXEND_Msk (0x01 << I2C_SLVIF_RXEND_Pos)
#define I2C_SLVIF_TXEND_Pos 1 //发送完成中断标志，写1清零
#define I2C_SLVIF_TXEND_Msk (0x01 << I2C_SLVIF_TXEND_Pos)
#define I2C_SLVIF_STADET_Pos 2 //检测到起始中断标志，写1清零
#define I2C_SLVIF_STADET_Msk (0x01 << I2C_SLVIF_STADET_Pos)
#define I2C_SLVIF_STODET_Pos 3 //检测到停止中断标志，写1清零
#define I2C_SLVIF_STODET_Msk (0x01 << I2C_SLVIF_STODET_Pos)
#define I2C_SLVIF_RDREQ_Pos 4 //接收到读请求中断标志
#define I2C_SLVIF_RDREQ_Msk (0x01 << I2C_SLVIF_RDREQ_Pos)
#define I2C_SLVIF_WRREQ_Pos 5 //接收到写请求中断标志
#define I2C_SLVIF_WRREQ_Msk (0x01 << I2C_SLVIF_WRREQ_Pos)
#define I2C_SLVIF_ACTIVE_Pos 6 //slave 有效
#define I2C_SLVIF_ACTIVE_Msk (0x01 << I2C_SLVIF_ACTIVE_Pos)

typedef struct
{
    __IO uint32_t CTRL;

    __IO uint32_t START;

    __IO uint32_t IE;

    __IO uint32_t IF;

    struct
    {
        __IO uint32_t STAT;

        __IO uint32_t DATA;

        uint32_t RESERVED[2];
    } CH[8];

    __IO uint32_t CTRL1;

    __IO uint32_t CTRL2;

    uint32_t RESERVED[2];

    __IO uint32_t CALIBSET;

    __IO uint32_t CALIBEN;
} ADC_TypeDef;

#define ADC_CTRL_CH0_Pos 0 //通道选中
#define ADC_CTRL_CH0_Msk (0x01 << ADC_CTRL_CH0_Pos)
#define ADC_CTRL_CH1_Pos 1
#define ADC_CTRL_CH1_Msk (0x01 << ADC_CTRL_CH1_Pos)
#define ADC_CTRL_CH2_Pos 2
#define ADC_CTRL_CH2_Msk (0x01 << ADC_CTRL_CH2_Pos)
#define ADC_CTRL_CH3_Pos 3
#define ADC_CTRL_CH3_Msk (0x01 << ADC_CTRL_CH3_Pos)
#define ADC_CTRL_CH4_Pos 4
#define ADC_CTRL_CH4_Msk (0x01 << ADC_CTRL_CH4_Pos)
#define ADC_CTRL_CH5_Pos 5
#define ADC_CTRL_CH5_Msk (0x01 << ADC_CTRL_CH5_Pos)
#define ADC_CTRL_CH6_Pos 6
#define ADC_CTRL_CH6_Msk (0x01 << ADC_CTRL_CH6_Pos)
#define ADC_CTRL_CH7_Pos 7
#define ADC_CTRL_CH7_Msk (0x01 << ADC_CTRL_CH7_Pos)
#define ADC_CTRL_AVG_Pos 8 //0 1次采样	  1 2次采样取平均值	  3 4次采样取平均值	  7 8次采样取平均值	  15 16次采样取平均值
#define ADC_CTRL_AVG_Msk (0x0F << ADC_CTRL_AVG_Pos)
#define ADC_CTRL_EN_Pos 12
#define ADC_CTRL_EN_Msk (0x01 << ADC_CTRL_EN_Pos)
#define ADC_CTRL_CONT_Pos 13                          //Continuous conversion，只在软件启动模式下有效，0 单次转换，转换完成后START位自动清除停止转换
#define ADC_CTRL_CONT_Msk (0x01 << ADC_CTRL_CONT_Pos) //   1 连续转换，启动后一直采样、转换，直到软件清除START位
#define ADC_CTRL_TRIG_Pos 14                          //转换触发方式：0 软件启动转换	  1 PWM触发
#define ADC_CTRL_TRIG_Msk (0x01 << ADC_CTRL_TRIG_Pos)
#define ADC_CTRL_CLKSRC_Pos 15 //0 VCO    1 HRC
#define ADC_CTRL_CLKSRC_Msk (0x01 << ADC_CTRL_CLKSRC_Pos)
#define ADC_CTRL_FIFOCLR_Pos 24 //[24] CH0_FIFO_CLR   [25] CH1_FIFO_CLR    ...    [31] CH7_FIFO_CLR
#define ADC_CTRL_FIFOCLR_Msk (0xFFu << ADC_CTRL_FIFOCLR_Pos)

#define ADC_START_GO_Pos 0 //软件触发模式下，写1启动ADC采样和转换，在单次模式下转换完成后硬件自动清零，在扫描模式下必须软件写0停止ADC转换
#define ADC_START_GO_Msk (0x01 << ADC_START_GO_Pos)
#define ADC_START_BUSY_Pos 4
#define ADC_START_BUSY_Msk (0x01 << ADC_START_BUSY_Pos)

#define ADC_IE_CH0EOC_Pos 0 //End Of Convertion
#define ADC_IE_CH0EOC_Msk (0x01 << ADC_IE_CH0EOC_Pos)
#define ADC_IE_CH0OVF_Pos 1 //Overflow
#define ADC_IE_CH0OVF_Msk (0x01 << ADC_IE_CH0OVF_Pos)
#define ADC_IE_CH0HFULL_Pos 2 //FIFO Half Full
#define ADC_IE_CH0HFULL_Msk (0x01 << ADC_IE_CH0HFULL_Pos)
#define ADC_IE_CH0FULL_Pos 3 //FIFO Full
#define ADC_IE_CH0FULL_Msk (0x01 << ADC_IE_CH0FULL_Pos)
#define ADC_IE_CH1EOC_Pos 4
#define ADC_IE_CH1EOC_Msk (0x01 << ADC_IE_CH1EOC_Pos)
#define ADC_IE_CH1OVF_Pos 5
#define ADC_IE_CH1OVF_Msk (0x01 << ADC_IE_CH1OVF_Pos)
#define ADC_IE_CH1HFULL_Pos 6
#define ADC_IE_CH1HFULL_Msk (0x01 << ADC_IE_CH1HFULL_Pos)
#define ADC_IE_CH1FULL_Pos 7
#define ADC_IE_CH1FULL_Msk (0x01 << ADC_IE_CH1FULL_Pos)
#define ADC_IE_CH2EOC_Pos 8
#define ADC_IE_CH2EOC_Msk (0x01 << ADC_IE_CH2EOC_Pos)
#define ADC_IE_CH2OVF_Pos 9
#define ADC_IE_CH2OVF_Msk (0x01 << ADC_IE_CH2OVF_Pos)
#define ADC_IE_CH2HFULL_Pos 10
#define ADC_IE_CH2HFULL_Msk (0x01 << ADC_IE_CH2HFULL_Pos)
#define ADC_IE_CH2FULL_Pos 11
#define ADC_IE_CH2FULL_Msk (0x01 << ADC_IE_CH2FULL_Pos)
#define ADC_IE_CH3EOC_Pos 12
#define ADC_IE_CH3EOC_Msk (0x01 << ADC_IE_CH3EOC_Pos)
#define ADC_IE_CH3OVF_Pos 13
#define ADC_IE_CH3OVF_Msk (0x01 << ADC_IE_CH3OVF_Pos)
#define ADC_IE_CH3HFULL_Pos 14
#define ADC_IE_CH3HFULL_Msk (0x01 << ADC_IE_CH3HFULL_Pos)
#define ADC_IE_CH3FULL_Pos 15
#define ADC_IE_CH3FULL_Msk (0x01 << ADC_IE_CH3FULL_Pos)
#define ADC_IE_CH4EOC_Pos 16
#define ADC_IE_CH4EOC_Msk (0x01 << ADC_IE_CH4EOC_Pos)
#define ADC_IE_CH4OVF_Pos 17
#define ADC_IE_CH4OVF_Msk (0x01 << ADC_IE_CH4OVF_Pos)
#define ADC_IE_CH4HFULL_Pos 18
#define ADC_IE_CH4HFULL_Msk (0x01 << ADC_IE_CH4HFULL_Pos)
#define ADC_IE_CH4FULL_Pos 19
#define ADC_IE_CH4FULL_Msk (0x01 << ADC_IE_CH4FULL_Pos)
#define ADC_IE_CH5EOC_Pos 20
#define ADC_IE_CH5EOC_Msk (0x01 << ADC_IE_CH5EOC_Pos)
#define ADC_IE_CH5OVF_Pos 21
#define ADC_IE_CH5OVF_Msk (0x01 << ADC_IE_CH5OVF_Pos)
#define ADC_IE_CH5HFULL_Pos 22
#define ADC_IE_CH5HFULL_Msk (0x01 << ADC_IE_CH5HFULL_Pos)
#define ADC_IE_CH5FULL_Pos 23
#define ADC_IE_CH5FULL_Msk (0x01 << ADC_IE_CH5FULL_Pos)
#define ADC_IE_CH6EOC_Pos 24
#define ADC_IE_CH6EOC_Msk (0x01 << ADC_IE_CH6EOC_Pos)
#define ADC_IE_CH6OVF_Pos 25
#define ADC_IE_CH6OVF_Msk (0x01 << ADC_IE_CH6OVF_Pos)
#define ADC_IE_CH6HFULL_Pos 26
#define ADC_IE_CH6HFULL_Msk (0x01 << ADC_IE_CH6HFULL_Pos)
#define ADC_IE_CH6FULL_Pos 27
#define ADC_IE_CH6FULL_Msk (0x01 << ADC_IE_CH6FULL_Pos)
#define ADC_IE_CH7EOC_Pos 28
#define ADC_IE_CH7EOC_Msk (0x01 << ADC_IE_CH7EOC_Pos)
#define ADC_IE_CH7OVF_Pos 29
#define ADC_IE_CH7OVF_Msk (0x01 << ADC_IE_CH7OVF_Pos)
#define ADC_IE_CH7HFULL_Pos 30
#define ADC_IE_CH7HFULL_Msk (0x01 << ADC_IE_CH7HFULL_Pos)
#define ADC_IE_CH7FULL_Pos 31
#define ADC_IE_CH7FULL_Msk (0x01u << ADC_IE_CH7FULL_Pos)

#define ADC_IF_CH0EOC_Pos 0 //写1清零
#define ADC_IF_CH0EOC_Msk (0x01 << ADC_IF_CH0EOC_Pos)
#define ADC_IF_CH0OVF_Pos 1 //写1清零
#define ADC_IF_CH0OVF_Msk (0x01 << ADC_IF_CH0OVF_Pos)
#define ADC_IF_CH0HFULL_Pos 2 //写1清零
#define ADC_IF_CH0HFULL_Msk (0x01 << ADC_IF_CH0HFULL_Pos)
#define ADC_IF_CH0FULL_Pos 3 //写1清零
#define ADC_IF_CH0FULL_Msk (0x01 << ADC_IF_CH0FULL_Pos)
#define ADC_IF_CH1EOC_Pos 4
#define ADC_IF_CH1EOC_Msk (0x01 << ADC_IF_CH1EOC_Pos)
#define ADC_IF_CH1OVF_Pos 5
#define ADC_IF_CH1OVF_Msk (0x01 << ADC_IF_CH1OVF_Pos)
#define ADC_IF_CH1HFULL_Pos 6
#define ADC_IF_CH1HFULL_Msk (0x01 << ADC_IF_CH1HFULL_Pos)
#define ADC_IF_CH1FULL_Pos 7
#define ADC_IF_CH1FULL_Msk (0x01 << ADC_IF_CH1FULL_Pos)
#define ADC_IF_CH2EOC_Pos 8
#define ADC_IF_CH2EOC_Msk (0x01 << ADC_IF_CH2EOC_Pos)
#define ADC_IF_CH2OVF_Pos 9
#define ADC_IF_CH2OVF_Msk (0x01 << ADC_IF_CH2OVF_Pos)
#define ADC_IF_CH2HFULL_Pos 10
#define ADC_IF_CH2HFULL_Msk (0x01 << ADC_IF_CH2HFULL_Pos)
#define ADC_IF_CH2FULL_Pos 11
#define ADC_IF_CH2FULL_Msk (0x01 << ADC_IF_CH2FULL_Pos)
#define ADC_IF_CH3EOC_Pos 12
#define ADC_IF_CH3EOC_Msk (0x01 << ADC_IF_CH3EOC_Pos)
#define ADC_IF_CH3OVF_Pos 13
#define ADC_IF_CH3OVF_Msk (0x01 << ADC_IF_CH3OVF_Pos)
#define ADC_IF_CH3HFULL_Pos 14
#define ADC_IF_CH3HFULL_Msk (0x01 << ADC_IF_CH3HFULL_Pos)
#define ADC_IF_CH3FULL_Pos 15
#define ADC_IF_CH3FULL_Msk (0x01 << ADC_IF_CH3FULL_Pos)
#define ADC_IF_CH4EOC_Pos 16
#define ADC_IF_CH4EOC_Msk (0x01 << ADC_IF_CH4EOC_Pos)
#define ADC_IF_CH4OVF_Pos 17
#define ADC_IF_CH4OVF_Msk (0x01 << ADC_IF_CH4OVF_Pos)
#define ADC_IF_CH4HFULL_Pos 18
#define ADC_IF_CH4HFULL_Msk (0x01 << ADC_IF_CH4HFULL_Pos)
#define ADC_IF_CH4FULL_Pos 19
#define ADC_IF_CH4FULL_Msk (0x01 << ADC_IF_CH4FULL_Pos)
#define ADC_IF_CH5EOC_Pos 20
#define ADC_IF_CH5EOC_Msk (0x01 << ADC_IF_CH5EOC_Pos)
#define ADC_IF_CH5OVF_Pos 21
#define ADC_IF_CH5OVF_Msk (0x01 << ADC_IF_CH5OVF_Pos)
#define ADC_IF_CH5HFULL_Pos 22
#define ADC_IF_CH5HFULL_Msk (0x01 << ADC_IF_CH5HFULL_Pos)
#define ADC_IF_CH5FULL_Pos 23
#define ADC_IF_CH5FULL_Msk (0x01 << ADC_IF_CH5FULL_Pos)
#define ADC_IF_CH6EOC_Pos 24
#define ADC_IF_CH6EOC_Msk (0x01 << ADC_IF_CH6EOC_Pos)
#define ADC_IF_CH6OVF_Pos 25
#define ADC_IF_CH6OVF_Msk (0x01 << ADC_IF_CH6OVF_Pos)
#define ADC_IF_CH6HFULL_Pos 26
#define ADC_IF_CH6HFULL_Msk (0x01 << ADC_IF_CH6HFULL_Pos)
#define ADC_IF_CH6FULL_Pos 27
#define ADC_IF_CH6FULL_Msk (0x01 << ADC_IF_CH6FULL_Pos)
#define ADC_IF_CH7EOC_Pos 28
#define ADC_IF_CH7EOC_Msk (0x01 << ADC_IF_CH7EOC_Pos)
#define ADC_IF_CH7OVF_Pos 29
#define ADC_IF_CH7OVF_Msk (0x01 << ADC_IF_CH7OVF_Pos)
#define ADC_IF_CH7HFULL_Pos 30
#define ADC_IF_CH7HFULL_Msk (0x01 << ADC_IF_CH7HFULL_Pos)
#define ADC_IF_CH7FULL_Pos 31
#define ADC_IF_CH7FULL_Msk (0x01 << ADC_IF_CH7FULL_Pos)

#define ADC_STAT_EOC_Pos 0 //写1清零
#define ADC_STAT_EOC_Msk (0x01 << ADC_STAT_EOC_Pos)
#define ADC_STAT_OVF_Pos 1 //读数据寄存器清除
#define ADC_STAT_OVF_Msk (0x01 << ADC_STAT_OVF_Pos)
#define ADC_STAT_HFULL_Pos 2
#define ADC_STAT_HFULL_Msk (0x01 << ADC_STAT_HFULL_Pos)
#define ADC_STAT_FULL_Pos 3
#define ADC_STAT_FULL_Msk (0x01 << ADC_STAT_FULL_Pos)
#define ADC_STAT_EMPTY_Pos 4
#define ADC_STAT_EMPTY_Msk (0x01 << ADC_STAT_EMPTY_Pos)

#define ADC_CTRL1_RIN_Pos 4 //输入阻抗：0 无穷大   1 105K   2 90K   3 75K   4 60K   5 45K   6 30K   7 15K
#define ADC_CTRL1_RIN_Msk (0x07 << ADC_CTRL1_RIN_Pos)

#define ADC_CTRL2_RESET_Pos 0 //数字电路复位
#define ADC_CTRL2_RESET_Msk (0x01 << ADC_CTRL2_RESET_Pos)
#define ADC_CTRL2_ADCEVCM_Pos 1 //ADC External VCM，ADC与PGA输出共模电平选择
#define ADC_CTRL2_ADCEVCM_Msk (0x01 << ADC_CTRL2_ADCEVCM_Pos)
#define ADC_CTRL2_PGAIVCM_Pos 2 //PGA Internal VCM，PGA输入共模电平选择
#define ADC_CTRL2_PGAIVCM_Msk (0x01 << ADC_CTRL2_PGAIVCM_Pos)
#define ADC_CTRL2_PGAGAIN_Pos 3 //0 25.1dB    1 21.6dB    2 11.1dB    3 3.5dB    4 0dB(1.8V)    5 -2.9dB    6 -5.3dB
#define ADC_CTRL2_PGAGAIN_Msk (0x07 << ADC_CTRL2_PGAGAIN_Pos)
#define ADC_CTRL2_REFPOUT_Pos 23 //1 ADC 内部 1.2V REFP电压输出到外部REFP引脚，用于测量，或在需要1.2V外部REFP时节省成本
#define ADC_CTRL2_REFPOUT_Msk		(0x01 << ADC_CTRL2_REFPOUT_Pos
#define ADC_CTRL2_CLKDIV_Pos 24 //时钟分频，只在时钟源为HRC时有效
#define ADC_CTRL2_CLKDIV_Msk (0x1F << ADC_CTRL2_CLKDIV_Pos)
#define ADC_CTRL2_PGAVCM_Pos 29
#define ADC_CTRL2_PGAVCM_Msk (0x07u << ADC_CTRL2_PGAVCM_Pos)

#define ADC_CALIBSET_OFFSET_Pos 0
#define ADC_CALIBSET_OFFSET_Msk (0x1FF << ADC_CALIBSET_OFFSET_Pos)
#define ADC_CALIBSET_K_Pos 16
#define ADC_CALIBSET_K_Msk (0x1FF << ADC_CALIBSET_K_Pos)

#define ADC_CALIBEN_OFFSET_Pos 0
#define ADC_CALIBEN_OFFSET_Msk (0x01 << ADC_CALIBEN_OFFSET_Pos)
#define ADC_CALIBEN_K_Pos 1
#define ADC_CALIBEN_K_Msk (0x01 << ADC_CALIBEN_K_Pos)

typedef struct
{
    __IO uint32_t MODE; //0 普通模式，A、B两路输出互相独立
                        //1 互补模式，A、B两路输出都由PERA、HIGHA控制，B路输出与A路输出极性相反，且DZA、DZB控制A、B路输出上升沿推迟时间
                        //2 单次模式，同普通模式，但一个周期后自动停止
                        //3 对称模式，A、B两路输出互相独立，以两个计数周期产生一个波形输出周期，分辨率提升一倍、频率降低一倍
                        //4 对称互补模式，对称模式和互补模式的综合

    __IO uint32_t PERA; //[15:0] 周期

    __IO uint32_t HIGHA; //[15:0] 高电平持续时长

    __IO uint32_t DZA; //[9:0] 死区，即上升沿推迟时长，必须小于HIGHA

    __IO uint32_t PERB;

    __IO uint32_t HIGHB;

    __IO uint32_t DZB;

    __IO uint32_t INIOUT; //Init Output level，初始输出电平
} PWM_TypeDef;

#define PWM_INIOUT_PWMA_Pos 0
#define PWM_INIOUT_PWMA_Msk (0x01 << PWM_INIOUT_PWMA_Pos)
#define PWM_INIOUT_PWMB_Pos 1
#define PWM_INIOUT_PWMB_Msk (0x01 << PWM_INIOUT_PWMB_Pos)

typedef struct
{
    __IO uint32_t FORCEH;

    __IO uint32_t ADTRG0A;
    __IO uint32_t ADTRG0B;

    __IO uint32_t ADTRG1A;
    __IO uint32_t ADTRG1B;

    __IO uint32_t ADTRG2A;
    __IO uint32_t ADTRG2B;

    __IO uint32_t ADTRG3A;
    __IO uint32_t ADTRG3B;

    __IO uint32_t ADTRG4A;
    __IO uint32_t ADTRG4B;

    __IO uint32_t ADTRG5A;
    __IO uint32_t ADTRG5B;

    uint32_t RESERVED[3];

    __IO uint32_t HALT; //刹车控制

    __IO uint32_t CHEN;

    __IO uint32_t IE;

    __IO uint32_t IF;

    __IO uint32_t IM; //Interrupt Mask

    __IO uint32_t IRS; //Interrupt Raw Stat
} PWMG_TypeDef;

#define PWMG_FORCEH_PWM0_Pos 0
#define PWMG_FORCEH_PWM0_Msk (0x01 << PWMG_FORCEH_PWM0_Pos)
#define PWMG_FORCEH_PWM1_Pos 1
#define PWMG_FORCEH_PWM1_Msk (0x01 << PWMG_FORCEH_PWM1_Pos)
#define PWMG_FORCEH_PWM2_Pos 2
#define PWMG_FORCEH_PWM2_Msk (0x01 << PWMG_FORCEH_PWM2_Pos)
#define PWMG_FORCEH_PWM3_Pos 3
#define PWMG_FORCEH_PWM3_Msk (0x01 << PWMG_FORCEH_PWM3_Pos)
#define PWMG_FORCEH_PWM4_Pos 4
#define PWMG_FORCEH_PWM4_Msk (0x01 << PWMG_FORCEH_PWM4_Pos)
#define PWMG_FORCEH_PWM5_Pos 5
#define PWMG_FORCEH_PWM5_Msk (0x01 << PWMG_FORCEH_PWM5_Pos)

#define PWMG_ADTRG_VALUE_Pos 0
#define PWMG_ADTRG_VALUE_Msk (0xFFFF << PWMG_ADTRG0A_VALUE_Pos)
#define PWMG_ADTRG_EVEN_Pos 16 //1 偶数周期生效    0 奇数周期生效
#define PWMG_ADTRG_EVEN_Msk (0x01 << PWMG_ADTRG0A_EVEN_Pos)
#define PWMG_ADTRG_EN_Pos 17
#define PWMG_ADTRG_EN_Msk (0x01 << PWMG_ADTRG0A_EN_Pos)

#define PWMG_HALT_EN_Pos 0
#define PWMG_HALT_EN_Msk (0x01 << PWMG_HALT_EN_Pos)
#define PWMG_HALT_PWM0_Pos 1
#define PWMG_HALT_PWM0_Msk (0x01 << PWMG_HALT_PWM0_Pos)
#define PWMG_HALT_PWM1_Pos 2
#define PWMG_HALT_PWM1_Msk (0x01 << PWMG_HALT_PWM1_Pos)
#define PWMG_HALT_PWM2_Pos 3
#define PWMG_HALT_PWM2_Msk (0x01 << PWMG_HALT_PWM2_Pos)
#define PWMG_HALT_PWM3_Pos 4
#define PWMG_HALT_PWM3_Msk (0x01 << PWMG_HALT_PWM3_Pos)
#define PWMG_HALT_PWM4_Pos 5
#define PWMG_HALT_PWM4_Msk (0x01 << PWMG_HALT_PWM4_Pos)
#define PWMG_HALT_PWM5_Pos 6
#define PWMG_HALT_PWM5_Msk (0x01 << PWMG_HALT_PWM5_Pos)
#define PWMG_HALT_STOPCNT_Pos 7 //1 刹车时将PWM计数器清零，停止计数    0 刹车时，PWM计数器继续计数
#define PWMG_HALT_STOPCNT_Msk (0x01 << PWMG_HALT_STOPCNT_Pos)
#define PWMG_HALT_INLVL_Pos 8 //1 刹车输入高电平有效
#define PWMG_HALT_INLVL_Msk (0x01 << PWMG_HALT_INLVL_Pos)
#define PWMG_HALT_OUTLVL_Pos 9 //1 刹车过程中输出高电平
#define PWMG_HALT_OUTLVL_Msk (0x01 << PWMG_HALT_OUTLVL_Pos)
#define PWMG_HALT_STAT_Pos 10 //1 正在刹车
#define PWMG_HALT_STAT_Msk (0x01 << PWMG_HALT_STAT_Pos)

#define PWMG_CHEN_PWM0A_Pos 0
#define PWMG_CHEN_PWM0A_Msk (0x01 << PWMG_CHEN_PWM0A_Pos)
#define PWMG_CHEN_PWM0B_Pos 1
#define PWMG_CHEN_PWM0B_Msk (0x01 << PWMG_CHEN_PWM0B_Pos)
#define PWMG_CHEN_PWM1A_Pos 2
#define PWMG_CHEN_PWM1A_Msk (0x01 << PWMG_CHEN_PWM1A_Pos)
#define PWMG_CHEN_PWM1B_Pos 3
#define PWMG_CHEN_PWM1B_Msk (0x01 << PWMG_CHEN_PWM1B_Pos)
#define PWMG_CHEN_PWM2A_Pos 4
#define PWMG_CHEN_PWM2A_Msk (0x01 << PWMG_CHEN_PWM2A_Pos)
#define PWMG_CHEN_PWM2B_Pos 5
#define PWMG_CHEN_PWM2B_Msk (0x01 << PWMG_CHEN_PWM2B_Pos)
#define PWMG_CHEN_PWM3A_Pos 6
#define PWMG_CHEN_PWM3A_Msk (0x01 << PWMG_CHEN_PWM3A_Pos)
#define PWMG_CHEN_PWM3B_Pos 7
#define PWMG_CHEN_PWM3B_Msk (0x01 << PWMG_CHEN_PWM3B_Pos)
#define PWMG_CHEN_PWM4A_Pos 8
#define PWMG_CHEN_PWM4A_Msk (0x01 << PWMG_CHEN_PWM4A_Pos)
#define PWMG_CHEN_PWM4B_Pos 9
#define PWMG_CHEN_PWM4B_Msk (0x01 << PWMG_CHEN_PWM4B_Pos)
#define PWMG_CHEN_PWM5A_Pos 10
#define PWMG_CHEN_PWM5A_Msk (0x01 << PWMG_CHEN_PWM5A_Pos)
#define PWMG_CHEN_PWM5B_Pos 11
#define PWMG_CHEN_PWM5B_Msk (0x01 << PWMG_CHEN_PWM5B_Pos)

#define PWMG_IE_NEWP0A_Pos 0
#define PWMG_IE_NEWP0A_Msk (0x01 << PWMG_IE_NEWP0A_Pos)
#define PWMG_IE_NEWP0B_Pos 1
#define PWMG_IE_NEWP0B_Msk (0x01 << PWMG_IE_NEWP0B_Pos)
#define PWMG_IE_NEWP1A_Pos 2
#define PWMG_IE_NEWP1A_Msk (0x01 << PWMG_IE_NEWP1A_Pos)
#define PWMG_IE_NEWP1B_Pos 3
#define PWMG_IE_NEWP1B_Msk (0x01 << PWMG_IE_NEWP1B_Pos)
#define PWMG_IE_NEWP2A_Pos 4
#define PWMG_IE_NEWP2A_Msk (0x01 << PWMG_IE_NEWP2A_Pos)
#define PWMG_IE_NEWP2B_Pos 5
#define PWMG_IE_NEWP2B_Msk (0x01 << PWMG_IE_NEWP2B_Pos)
#define PWMG_IE_NEWP3A_Pos 6
#define PWMG_IE_NEWP3A_Msk (0x01 << PWMG_IE_NEWP3A_Pos)
#define PWMG_IE_NEWP3B_Pos 7
#define PWMG_IE_NEWP3B_Msk (0x01 << PWMG_IE_NEWP3B_Pos)
#define PWMG_IE_NEWP4A_Pos 8
#define PWMG_IE_NEWP4A_Msk (0x01 << PWMG_IE_NEWP4A_Pos)
#define PWMG_IE_NEWP4B_Pos 9
#define PWMG_IE_NEWP4B_Msk (0x01 << PWMG_IE_NEWP4B_Pos)
#define PWMG_IE_NEWP5A_Pos 10
#define PWMG_IE_NEWP5A_Msk (0x01 << PWMG_IE_NEWP5A_Pos)
#define PWMG_IE_NEWP5B_Pos 11
#define PWMG_IE_NEWP5B_Msk (0x01 << PWMG_IE_NEWP5B_Pos)
#define PWMG_IE_HEND0A_Pos 12
#define PWMG_IE_HEND0A_Msk (0x01 << PWMG_IE_HEND0A_Pos)
#define PWMG_IE_HEND0B_Pos 13
#define PWMG_IE_HEND0B_Msk (0x01 << PWMG_IE_HEND0B_Pos)
#define PWMG_IE_HEND1A_Pos 14
#define PWMG_IE_HEND1A_Msk (0x01 << PWMG_IE_HEND1A_Pos)
#define PWMG_IE_HEND1B_Pos 15
#define PWMG_IE_HEND1B_Msk (0x01 << PWMG_IE_HEND1B_Pos)
#define PWMG_IE_HEND2A_Pos 16
#define PWMG_IE_HEND2A_Msk (0x01 << PWMG_IE_HEND2A_Pos)
#define PWMG_IE_HEND2B_Pos 17
#define PWMG_IE_HEND2B_Msk (0x01 << PWMG_IE_HEND2B_Pos)
#define PWMG_IE_HEND3A_Pos 18
#define PWMG_IE_HEND3A_Msk (0x01 << PWMG_IE_HEND3A_Pos)
#define PWMG_IE_HEND3B_Pos 19
#define PWMG_IE_HEND3B_Msk (0x01 << PWMG_IE_HEND3B_Pos)
#define PWMG_IE_HEND4A_Pos 20
#define PWMG_IE_HEND4A_Msk (0x01 << PWMG_IE_HEND4A_Pos)
#define PWMG_IE_HEND4B_Pos 21
#define PWMG_IE_HEND4B_Msk (0x01 << PWMG_IE_HEND4B_Pos)
#define PWMG_IE_HEND5A_Pos 22
#define PWMG_IE_HEND5A_Msk (0x01 << PWMG_IE_HEND5A_Pos)
#define PWMG_IE_HEND5B_Pos 23
#define PWMG_IE_HEND5B_Msk (0x01 << PWMG_IE_HEND5B_Pos)
#define PWMG_IE_HALT_Pos 24
#define PWMG_IE_HALT_Msk (0x01 << PWMG_IE_HALT_Pos)

#define PWMG_IF_NEWP0A_Pos 0
#define PWMG_IF_NEWP0A_Msk (0x01 << PWMG_IF_NEWP0A_Pos)
#define PWMG_IF_NEWP0B_Pos 1
#define PWMG_IF_NEWP0B_Msk (0x01 << PWMG_IF_NEWP0B_Pos)
#define PWMG_IF_NEWP1A_Pos 2
#define PWMG_IF_NEWP1A_Msk (0x01 << PWMG_IF_NEWP1A_Pos)
#define PWMG_IF_NEWP1B_Pos 3
#define PWMG_IF_NEWP1B_Msk (0x01 << PWMG_IF_NEWP1B_Pos)
#define PWMG_IF_NEWP2A_Pos 4
#define PWMG_IF_NEWP2A_Msk (0x01 << PWMG_IF_NEWP2A_Pos)
#define PWMG_IF_NEWP2B_Pos 5
#define PWMG_IF_NEWP2B_Msk (0x01 << PWMG_IF_NEWP2B_Pos)
#define PWMG_IF_NEWP3A_Pos 6
#define PWMG_IF_NEWP3A_Msk (0x01 << PWMG_IF_NEWP3A_Pos)
#define PWMG_IF_NEWP3B_Pos 7
#define PWMG_IF_NEWP3B_Msk (0x01 << PWMG_IF_NEWP3B_Pos)
#define PWMG_IF_NEWP4A_Pos 8
#define PWMG_IF_NEWP4A_Msk (0x01 << PWMG_IF_NEWP4A_Pos)
#define PWMG_IF_NEWP4B_Pos 9
#define PWMG_IF_NEWP4B_Msk (0x01 << PWMG_IF_NEWP4B_Pos)
#define PWMG_IF_NEWP5A_Pos 10
#define PWMG_IF_NEWP5A_Msk (0x01 << PWMG_IF_NEWP5A_Pos)
#define PWMG_IF_NEWP5B_Pos 11
#define PWMG_IF_NEWP5B_Msk (0x01 << PWMG_IF_NEWP5B_Pos)
#define PWMG_IF_HEND0A_Pos 12
#define PWMG_IF_HEND0A_Msk (0x01 << PWMG_IF_HEND0A_Pos)
#define PWMG_IF_HEND0B_Pos 13
#define PWMG_IF_HEND0B_Msk (0x01 << PWMG_IF_HEND0B_Pos)
#define PWMG_IF_HEND1A_Pos 14
#define PWMG_IF_HEND1A_Msk (0x01 << PWMG_IF_HEND1A_Pos)
#define PWMG_IF_HEND1B_Pos 15
#define PWMG_IF_HEND1B_Msk (0x01 << PWMG_IF_HEND1B_Pos)
#define PWMG_IF_HEND2A_Pos 16
#define PWMG_IF_HEND2A_Msk (0x01 << PWMG_IF_HEND2A_Pos)
#define PWMG_IF_HEND2B_Pos 17
#define PWMG_IF_HEND2B_Msk (0x01 << PWMG_IF_HEND2B_Pos)
#define PWMG_IF_HEND3A_Pos 18
#define PWMG_IF_HEND3A_Msk (0x01 << PWMG_IF_HEND3A_Pos)
#define PWMG_IF_HEND3B_Pos 19
#define PWMG_IF_HEND3B_Msk (0x01 << PWMG_IF_HEND3B_Pos)
#define PWMG_IF_HEND4A_Pos 20
#define PWMG_IF_HEND4A_Msk (0x01 << PWMG_IF_HEND4A_Pos)
#define PWMG_IF_HEND4B_Pos 21
#define PWMG_IF_HEND4B_Msk (0x01 << PWMG_IF_HEND4B_Pos)
#define PWMG_IF_HEND5A_Pos 22
#define PWMG_IF_HEND5A_Msk (0x01 << PWMG_IF_HEND5A_Pos)
#define PWMG_IF_HEND5B_Pos 23
#define PWMG_IF_HEND5B_Msk (0x01 << PWMG_IF_HEND5B_Pos)
#define PWMG_IF_HALT_Pos 24
#define PWMG_IF_HALT_Msk (0x01 << PWMG_IF_HALT_Pos)

#define PWMG_IM_NEWP0A_Pos 0 //Interrupt Mask
#define PWMG_IM_NEWP0A_Msk (0x01 << PWMG_IM_NEWP0A_Pos)
#define PWMG_IM_NEWP0B_Pos 1
#define PWMG_IM_NEWP0B_Msk (0x01 << PWMG_IM_NEWP0B_Pos)
#define PWMG_IM_NEWP1A_Pos 2
#define PWMG_IM_NEWP1A_Msk (0x01 << PWMG_IM_NEWP1A_Pos)
#define PWMG_IM_NEWP1B_Pos 3
#define PWMG_IM_NEWP1B_Msk (0x01 << PWMG_IM_NEWP1B_Pos)
#define PWMG_IM_NEWP2A_Pos 4
#define PWMG_IM_NEWP2A_Msk (0x01 << PWMG_IM_NEWP2A_Pos)
#define PWMG_IM_NEWP2B_Pos 5
#define PWMG_IM_NEWP2B_Msk (0x01 << PWMG_IM_NEWP2B_Pos)
#define PWMG_IM_NEWP3A_Pos 6
#define PWMG_IM_NEWP3A_Msk (0x01 << PWMG_IM_NEWP3A_Pos)
#define PWMG_IM_NEWP3B_Pos 7
#define PWMG_IM_NEWP3B_Msk (0x01 << PWMG_IM_NEWP3B_Pos)
#define PWMG_IM_NEWP4A_Pos 8
#define PWMG_IM_NEWP4A_Msk (0x01 << PWMG_IM_NEWP4A_Pos)
#define PWMG_IM_NEWP4B_Pos 9
#define PWMG_IM_NEWP4B_Msk (0x01 << PWMG_IM_NEWP4B_Pos)
#define PWMG_IM_NEWP5A_Pos 10
#define PWMG_IM_NEWP5A_Msk (0x01 << PWMG_IM_NEWP5A_Pos)
#define PWMG_IM_NEWP5B_Pos 11
#define PWMG_IM_NEWP5B_Msk (0x01 << PWMG_IM_NEWP5B_Pos)
#define PWMG_IM_HEND0A_Pos 12
#define PWMG_IM_HEND0A_Msk (0x01 << PWMG_IM_HEND0A_Pos)
#define PWMG_IM_HEND0B_Pos 13
#define PWMG_IM_HEND0B_Msk (0x01 << PWMG_IM_HEND0B_Pos)
#define PWMG_IM_HEND1A_Pos 14
#define PWMG_IM_HEND1A_Msk (0x01 << PWMG_IM_HEND1A_Pos)
#define PWMG_IM_HEND1B_Pos 15
#define PWMG_IM_HEND1B_Msk (0x01 << PWMG_IM_HEND1B_Pos)
#define PWMG_IM_HEND2A_Pos 16
#define PWMG_IM_HEND2A_Msk (0x01 << PWMG_IM_HEND2A_Pos)
#define PWMG_IM_HEND2B_Pos 17
#define PWMG_IM_HEND2B_Msk (0x01 << PWMG_IM_HEND2B_Pos)
#define PWMG_IM_HEND3A_Pos 18
#define PWMG_IM_HEND3A_Msk (0x01 << PWMG_IM_HEND3A_Pos)
#define PWMG_IM_HEND3B_Pos 19
#define PWMG_IM_HEND3B_Msk (0x01 << PWMG_IM_HEND3B_Pos)
#define PWMG_IM_HEND4A_Pos 20
#define PWMG_IM_HEND4A_Msk (0x01 << PWMG_IM_HEND4A_Pos)
#define PWMG_IM_HEND4B_Pos 21
#define PWMG_IM_HEND4B_Msk (0x01 << PWMG_IM_HEND4B_Pos)
#define PWMG_IM_HEND5A_Pos 22
#define PWMG_IM_HEND5A_Msk (0x01 << PWMG_IM_HEND5A_Pos)
#define PWMG_IM_HEND5B_Pos 23
#define PWMG_IM_HEND5B_Msk (0x01 << PWMG_IM_HEND5B_Pos)
#define PWMG_IM_HALT_Pos 24
#define PWMG_IM_HALT_Msk (0x01 << PWMG_IM_HALT_Pos)

#define PWMG_IRS_NEWP0A_Pos 0 //Interrupt Raw State
#define PWMG_IRS_NEWP0A_Msk (0x01 << PWMG_IRS_NEWP0A_Pos)
#define PWMG_IRS_NEWP0B_Pos 1
#define PWMG_IRS_NEWP0B_Msk (0x01 << PWMG_IRS_NEWP0B_Pos)
#define PWMG_IRS_NEWP1A_Pos 2
#define PWMG_IRS_NEWP1A_Msk (0x01 << PWMG_IRS_NEWP1A_Pos)
#define PWMG_IRS_NEWP1B_Pos 3
#define PWMG_IRS_NEWP1B_Msk (0x01 << PWMG_IRS_NEWP1B_Pos)
#define PWMG_IRS_NEWP2A_Pos 4
#define PWMG_IRS_NEWP2A_Msk (0x01 << PWMG_IRS_NEWP2A_Pos)
#define PWMG_IRS_NEWP2B_Pos 5
#define PWMG_IRS_NEWP2B_Msk (0x01 << PWMG_IRS_NEWP2B_Pos)
#define PWMG_IRS_NEWP3A_Pos 6
#define PWMG_IRS_NEWP3A_Msk (0x01 << PWMG_IRS_NEWP3A_Pos)
#define PWMG_IRS_NEWP3B_Pos 7
#define PWMG_IRS_NEWP3B_Msk (0x01 << PWMG_IRS_NEWP3B_Pos)
#define PWMG_IRS_NEWP4A_Pos 8
#define PWMG_IRS_NEWP4A_Msk (0x01 << PWMG_IRS_NEWP4A_Pos)
#define PWMG_IRS_NEWP4B_Pos 9
#define PWMG_IRS_NEWP4B_Msk (0x01 << PWMG_IRS_NEWP4B_Pos)
#define PWMG_IRS_NEWP5A_Pos 10
#define PWMG_IRS_NEWP5A_Msk (0x01 << PWMG_IRS_NEWP5A_Pos)
#define PWMG_IRS_NEWP5B_Pos 11
#define PWMG_IRS_NEWP5B_Msk (0x01 << PWMG_IRS_NEWP5B_Pos)
#define PWMG_IRS_HEND0A_Pos 12
#define PWMG_IRS_HEND0A_Msk (0x01 << PWMG_IRS_HEND0A_Pos)
#define PWMG_IRS_HEND0B_Pos 13
#define PWMG_IRS_HEND0B_Msk (0x01 << PWMG_IRS_HEND0B_Pos)
#define PWMG_IRS_HEND1A_Pos 14
#define PWMG_IRS_HEND1A_Msk (0x01 << PWMG_IRS_HEND1A_Pos)
#define PWMG_IRS_HEND1B_Pos 15
#define PWMG_IRS_HEND1B_Msk (0x01 << PWMG_IRS_HEND1B_Pos)
#define PWMG_IRS_HEND2A_Pos 16
#define PWMG_IRS_HEND2A_Msk (0x01 << PWMG_IRS_HEND2A_Pos)
#define PWMG_IRS_HEND2B_Pos 17
#define PWMG_IRS_HEND2B_Msk (0x01 << PWMG_IRS_HEND2B_Pos)
#define PWMG_IRS_HEND3A_Pos 18
#define PWMG_IRS_HEND3A_Msk (0x01 << PWMG_IRS_HEND3A_Pos)
#define PWMG_IRS_HEND3B_Pos 19
#define PWMG_IRS_HEND3B_Msk (0x01 << PWMG_IRS_HEND3B_Pos)
#define PWMG_IRS_HEND4A_Pos 20
#define PWMG_IRS_HEND4A_Msk (0x01 << PWMG_IRS_HEND4A_Pos)
#define PWMG_IRS_HEND4B_Pos 21
#define PWMG_IRS_HEND4B_Msk (0x01 << PWMG_IRS_HEND4B_Pos)
#define PWMG_IRS_HEND5A_Pos 22
#define PWMG_IRS_HEND5A_Msk (0x01 << PWMG_IRS_HEND5A_Pos)
#define PWMG_IRS_HEND5B_Pos 23
#define PWMG_IRS_HEND5B_Msk (0x01 << PWMG_IRS_HEND5B_Pos)
#define PWMG_IRS_HALT_Pos 24
#define PWMG_IRS_HALT_Msk (0x01 << PWMG_IRS_HALT_Pos)

typedef struct
{
    __IO uint32_t EN; //[0] ENABLE

    __IO uint32_t IE; //只有为1时，IF[CHx]在DMA传输结束时才能变为1，否则将一直保持在0

    __IO uint32_t IM; //当为1时，即使IF[CHx]为1，dma_int也不会因此变1

    __IO uint32_t IF; //写1清零

    uint32_t RESERVED[12];

    struct
    {
        __IO uint32_t CR;

        __IO uint32_t AM; //Adress Mode

        __IO uint32_t SRC;

        __IO uint32_t SRCSGADDR1; //只在Scatter Gather模式下使用

        __IO uint32_t SRCSGADDR2; //只在Scatter Gather模式下使用

        __IO uint32_t SRCSGADDR3; //只在Scatter Gather模式下使用

        __IO uint32_t SRCSGLEN; //只在Scatter Gather模式下使用

        __IO uint32_t DST;

        __IO uint32_t DSTSGADDR1; //只在Scatter Gather模式下使用

        __IO uint32_t DSTSGADDR2; //只在Scatter Gather模式下使用

        __IO uint32_t DSTSGADDR3; //只在Scatter Gather模式下使用

        __IO uint32_t DSTSGLEN; //只在Scatter Gather模式下使用

        uint32_t RESERVED[4];
    } CH[3];
} DMA_TypeDef;

#define DMA_IE_CH0_Pos 0
#define DMA_IE_CH0_Msk (0x01 << DMA_IE_CH0_Pos)
#define DMA_IE_CH1_Pos 1
#define DMA_IE_CH1_Msk (0x01 << DMA_IE_CH1_Pos)
#define DMA_IE_CH2_Pos 2
#define DMA_IE_CH2_Msk (0x01 << DMA_IE_CH2_Pos)
#define DMA_IE_CH3_Pos 3
#define DMA_IE_CH3_Msk (0x01 << DMA_IE_CH3_Pos)
#define DMA_IE_CH4_Pos 4
#define DMA_IE_CH4_Msk (0x01 << DMA_IE_CH4_Pos)
#define DMA_IE_CH5_Pos 5
#define DMA_IE_CH5_Msk (0x01 << DMA_IE_CH5_Pos)
#define DMA_IE_CH6_Pos 6
#define DMA_IE_CH6_Msk (0x01 << DMA_IE_CH6_Pos)
#define DMA_IE_CH7_Pos 7
#define DMA_IE_CH7_Msk (0x01 << DMA_IE_CH7_Pos)

#define DMA_IM_CH0_Pos 0
#define DMA_IM_CH0_Msk (0x01 << DMA_IM_CH0_Pos)
#define DMA_IM_CH1_Pos 1
#define DMA_IM_CH1_Msk (0x01 << DMA_IM_CH1_Pos)
#define DMA_IM_CH2_Pos 2
#define DMA_IM_CH2_Msk (0x01 << DMA_IM_CH2_Pos)
#define DMA_IM_CH3_Pos 3
#define DMA_IM_CH3_Msk (0x01 << DMA_IM_CH3_Pos)
#define DMA_IM_CH4_Pos 4
#define DMA_IM_CH4_Msk (0x01 << DMA_IM_CH4_Pos)
#define DMA_IM_CH5_Pos 5
#define DMA_IM_CH5_Msk (0x01 << DMA_IM_CH5_Pos)
#define DMA_IM_CH6_Pos 6
#define DMA_IM_CH6_Msk (0x01 << DMA_IM_CH6_Pos)
#define DMA_IM_CH7_Pos 7
#define DMA_IM_CH7_Msk (0x01 << DMA_IM_CH7_Pos)

#define DMA_IF_CH0_Pos 0
#define DMA_IF_CH0_Msk (0x01 << DMA_IF_CH0_Pos)
#define DMA_IF_CH1_Pos 1
#define DMA_IF_CH1_Msk (0x01 << DMA_IF_CH1_Pos)
#define DMA_IF_CH2_Pos 2
#define DMA_IF_CH2_Msk (0x01 << DMA_IF_CH2_Pos)
#define DMA_IF_CH3_Pos 3
#define DMA_IF_CH3_Msk (0x01 << DMA_IF_CH3_Pos)
#define DMA_IF_CH4_Pos 4
#define DMA_IF_CH4_Msk (0x01 << DMA_IF_CH4_Pos)
#define DMA_IF_CH5_Pos 5
#define DMA_IF_CH5_Msk (0x01 << DMA_IF_CH5_Pos)
#define DMA_IF_CH6_Pos 6
#define DMA_IF_CH6_Msk (0x01 << DMA_IF_CH6_Pos)
#define DMA_IF_CH7_Pos 7
#define DMA_IF_CH7_Msk (0x01 << DMA_IF_CH7_Pos)

#define DMA_CR_LEN_Pos 0 //此通道传输总长度，0对应1字节，最大4096字节
#define DMA_CR_LEN_Msk (0xFFF << DMA_CR_LEN_Pos)
#define DMA_CR_RXEN_Pos 16
#define DMA_CR_RXEN_Msk (0x01 << DMA_CR_RXEN_Pos)
#define DMA_CR_TXEN_Pos 17
#define DMA_CR_TXEN_Msk (0x01 << DMA_CR_TXEN_Pos)
#define DMA_CR_AUTORE_Pos 18 //Auto Restart, 通道在传输完成后，是否自动重新启动
#define DMA_CR_AUTORE_Msk (0x01 << DMA_CR_AUTORE_Pos)

#define DMA_AM_SRCAM_Pos 0 //Address Mode	0 地址固定    1 地址递增    2 scatter gather模式
#define DMA_AM_SRCAM_Msk (0x03 << DMA_AM_SRCAM_Pos)
#define DMA_AM_DSTAM_Pos 8
#define DMA_AM_DSTAM_Msk (0x03 << DMA_AM_DSTAM_Pos)
#define DMA_AM_BURST_Pos 16
#define DMA_AM_BURST_Msk (0x01 << DMA_AM_BURST_Pos)

typedef struct
{
    __IO uint32_t CR; //Control Register

    __O uint32_t CMD; //Command Register

    __I uint32_t SR; //Status Register

    __I uint32_t IF; //Interrupt Flag

    __IO uint32_t IE; //Interrupt Enable

    uint32_t RESERVED;

    __IO uint32_t BT0; //Bit Time Register 0

    __IO uint32_t BT1; //Bit Time Register 1

    uint32_t RESERVED2[3];

    __I uint32_t ALC; //Arbitration Lost Capture, 仲裁丢失捕捉

    __I uint32_t ECC; //Error code capture, 错误代码捕捉

    __IO uint32_t EWLIM; //Error Warning Limit, 错误报警限制

    __IO uint32_t RXERR; //RX错误计数

    __IO uint32_t TXERR; //TX错误计数

    union {
        struct
        {                         //在复位时可读写，正常工作模式下不可访问
            __IO uint32_t ACR[4]; //Acceptance Check Register, 验收寄存器

            __IO uint32_t AMR[4]; //Acceptance Mask Register, 验收屏蔽寄存器；对应位写0，ID必须和验收寄存器匹配

            uint32_t RESERVED[5];
        } FILTER;

        union { //在正常工作模式下可读写，复位时不可访问
            struct
            {
                __O uint32_t INFO;

                __O uint32_t DATA[12];
            } TXFRAME;

            struct
            {
                __I uint32_t INFO;

                __I uint32_t DATA[12];
            } RXFRAME;
        };
    };

    __I uint32_t RMCNT; //Receive Message Count

    uint32_t RESERVED3[66];

    struct
    { //TXFRAME的读接口
        __I uint32_t INFO;

        __I uint32_t DATA[12];
    } TXFRAME_R;
} CAN_TypeDef;

#define CAN_CR_RST_Pos 0
#define CAN_CR_RST_Msk (0x01 << CAN_CR_RST_Pos)
#define CAN_CR_LOM_Pos 1 //Listen Only Mode
#define CAN_CR_LOM_Msk (0x01 << CAN_CR_LOM_Pos)
#define CAN_CR_STM_Pos 2 //Self Test Mode, 此模式下即使没有应答，CAN控制器也可以成功发送
#define CAN_CR_STM_Msk (0x01 << CAN_CR_STM_Pos)
#define CAN_CR_AFM_Pos 3 //Acceptance Filter Mode, 1 单个验收滤波器（32位）   0 两个验收滤波器（16位）
#define CAN_CR_AFM_Msk (0x01 << CAN_CR_AFM_Pos)
#define CAN_CR_SLEEP_Pos 4 //写1进入睡眠模式，有总线活动或中断时唤醒并自动清零此位
#define CAN_CR_SLEEP_Msk (0x01 << CAN_CR_SLEEP_Pos)

#define CAN_CMD_TXREQ_Pos 0 //Transmission Request
#define CAN_CMD_TXREQ_Msk (0x01 << CAN_CMD_TXREQ_Pos)
#define CAN_CMD_ABTTX_Pos 1 //Abort Transmission
#define CAN_CMD_ABTTX_Msk (0x01 << CAN_CMD_ABTTX_Pos)
#define CAN_CMD_RRB_Pos 2 //Release Receive Buffer
#define CAN_CMD_RRB_Msk (0x01 << CAN_CMD_RRB_Pos)
#define CAN_CMD_CLROV_Pos 3 //Clear Data Overrun
#define CAN_CMD_CLROV_Msk (0x01 << CAN_CMD_CLROV_Pos)
#define CAN_CMD_SRR_Pos 4 //Self Reception Request
#define CAN_CMD_SRR_Msk (0x01 << CAN_CMD_SRR_Pos)

#define CAN_SR_RXDA_Pos 0 //Receive Data Available，接收FIFO中有完整消息可以读取
#define CAN_SR_RXDA_Msk (0x01 << CAN_SR_RXDA_Pos)
#define CAN_SR_RXOV_Pos 1 //Receive FIFO Overrun，新接收的信息由于接收FIFO已满而丢掉
#define CAN_SR_RXOV_Msk (0x01 << CAN_SR_RXOV_Pos)
#define CAN_SR_TXBR_Pos 2 //Transmit Buffer Release，0 正在处理前面的发送，现在不能写新的消息    1 可以写入新的消息发送
#define CAN_SR_TXBR_Msk (0x01 << CAN_SR_TXBR_Pos)
#define CAN_SR_TXOK_Pos 3 //Transmit OK，successfully completed
#define CAN_SR_TXOK_Msk (0x01 << CAN_SR_TXOK_Pos)
#define CAN_SR_RXBUSY_Pos 4 //Receive Busy，正在接收
#define CAN_SR_RXBUSY_Msk (0x01 << CAN_SR_RXBUSY_Pos)
#define CAN_SR_TXBUSY_Pos 5 //Transmit Busy，正在发送
#define CAN_SR_TXBUSY_Msk (0x01 << CAN_SR_TXBUSY_Pos)
#define CAN_SR_ERRWARN_Pos 6 //1 至少一个错误计数器达到 Warning Limit
#define CAN_SR_ERRWARN_Msk (0x01 << CAN_SR_ERRWARN_Pos)
#define CAN_SR_BUSOFF_Pos 7 //1 CAN 控制器处于总线关闭状态，没有参与到总线活动
#define CAN_SR_BUSOFF_Msk (0x01 << CAN_SR_BUSOFF_Pos)

#define CAN_IF_RXDA_Pos 0 //IF.RXDA = SR.RXDA & IE.RXDA
#define CAN_IF_RXDA_Msk (0x01 << CAN_IF_RXDA_Pos)
#define CAN_IF_TXBR_Pos 1 //当IE.TXBR=1时，SR.TXBR由0变成1将置位此位
#define CAN_IF_TXBR_Msk (0x01 << CAN_IF_TXBR_Pos)
#define CAN_IF_ERRWARN_Pos 2 //当IE.ERRWARN=1时，SR.ERRWARN或SR.BUSOFF 0-to-1 或 1-to-0将置位此位
#define CAN_IF_ERRWARN_Msk (0x01 << CAN_IF_ERRWARN_Pos)
#define CAN_IF_RXOV_Pos 3 //IF.RXOV = SR.RXOV & IE.RXOV
#define CAN_IF_RXOV_Msk (0x01 << CAN_IF_RXOV_Pos)
#define CAN_IF_WKUP_Pos 4 //当IE.WKUP=1时，在睡眠模式下的CAN控制器检测到总线活动时硬件置位
#define CAN_IF_WKUP_Msk (0x01 << CAN_IF_WKUP_Pos)
#define CAN_IF_ERRPASS_Pos 5 //
#define CAN_IF_ERRPASS_Msk (0x01 << CAN_IF_ERRPASS_Pos)
#define CAN_IF_ARBLOST_Pos 6 //Arbitration Lost，当IE.ARBLOST=1时，CAN控制器丢失仲裁变成接收方时硬件置位
#define CAN_IF_ARBLOST_Msk (0x01 << CAN_IF_ARBLOST_Pos)
#define CAN_IF_BUSERR_Pos 7 //当IE.BUSERR=1时，CAN控制器检测到总线错误时硬件置位
#define CAN_IF_BUSERR_Msk (0x01 << CAN_IF_BUSERR_Pos)

#define CAN_IE_RXDA_Pos 0
#define CAN_IE_RXDA_Msk (0x01 << CAN_IE_RXDA_Pos)
#define CAN_IE_TXBR_Pos 1
#define CAN_IE_TXBR_Msk (0x01 << CAN_IE_TXBR_Pos)
#define CAN_IE_ERRWARN_Pos 2
#define CAN_IE_ERRWARN_Msk (0x01 << CAN_IE_ERRWARN_Pos)
#define CAN_IE_RXOV_Pos 3
#define CAN_IE_RXOV_Msk (0x01 << CAN_IE_RXOV_Pos)
#define CAN_IE_WKUP_Pos 4
#define CAN_IE_WKUP_Msk (0x01 << CAN_IE_WKUP_Pos)
#define CAN_IE_ERRPASS_Pos 5
#define CAN_IE_ERRPASS_Msk (0x01 << CAN_IE_ERRPASS_Pos)
#define CAN_IE_ARBLOST_Pos 6
#define CAN_IE_ARBLOST_Msk (0x01 << CAN_IE_ARBLOST_Pos)
#define CAN_IE_BUSERR_Pos 7
#define CAN_IE_BUSERR_Msk (0x01 << CAN_IE_BUSERR_Pos)

#define CAN_BT0_BRP_Pos 0 //Baud Rate Prescaler，CAN时间单位=2*Tsysclk*(BRP+1)
#define CAN_BT0_BRP_Msk (0x3F << CAN_BT0_BRP_Pos)
#define CAN_BT0_SJW_Pos 6 //Synchronization Jump Width
#define CAN_BT0_SJW_Msk (0x03 << CAN_BT0_SJW_Pos)

#define CAN_BT1_TSEG1_Pos 0 //t_tseg1 = CAN时间单位 * (TSEG1+1)
#define CAN_BT1_TSEG1_Msk (0x0F << CAN_BT1_TSEG1_Pos)
#define CAN_BT1_TSEG2_Pos 4 //t_tseg2 = CAN时间单位 * (TSEG2+1)
#define CAN_BT1_TSEG2_Msk (0x07 << CAN_BT1_TSEG2_Pos)
#define CAN_BT1_SAM_Pos 7 //采样次数  0: sampled once  1: sampled three times
#define CAN_BT1_SAM_Msk (0x01 << CAN_BT1_SAM_Pos)

#define CAN_ECC_SEGCODE_Pos 0 //Segment Code
#define CAN_ECC_SEGCODE_Msk (0x1F << CAN_ECC_SEGCODE_Pos)
#define CAN_ECC_DIR_Pos 5 //0 error occurred during transmission   1 during reception
#define CAN_ECC_DIR_Msk (0x01 << CAN_ECC_DIR_Pos)
#define CAN_ECC_ERRCODE_Pos 6 //Error Code：0 Bit error   1 Form error   2 Stuff error   3 other error
#define CAN_ECC_ERRCODE_Msk (0x03 << CAN_ECC_ERRCODE_Pos)

#define CAN_INFO_DLC_Pos 0 //Data Length Control
#define CAN_INFO_DLC_Msk (0x0F << CAN_INFO_DLC_Pos)
#define CAN_INFO_RTR_Pos 6 //Remote Frame，1 远程帧    0 数据帧
#define CAN_INFO_RTR_Msk (0x01 << CAN_INFO_RTR_Pos)
#define CAN_INFO_FF_Pos 7 //Frame Format，0 标准帧格式    1 扩展帧格式
#define CAN_INFO_FF_Msk (0x01 << CAN_INFO_FF_Pos)

typedef struct
{
    __IO uint32_t IE; //[0] 为0的时候，IF[0]维持为0

    __IO uint32_t IF; //[0] 当完成指定长度的数据传输时置1，写1清零

    __IO uint32_t IM; //[0] 当该寄存器为1时，LCDC的中断不会输出给系统的中断控制寄存器

    __IO uint32_t START;

    __IO uint32_t SRCADDR; //数据源地址寄存器，必须字对齐（即地址的低2位必须是0）

    __IO uint32_t CR0;

    __IO uint32_t CR1;

    __IO uint32_t PRECMDV; //在MPU接口中，发送数据前，RS拉低的那一拍，数据总线上的值
} LCD_TypeDef;

#define LCD_START_MPUEN_Pos 0 //0 RGB接口    1 MPU接口
#define LCD_START_MPUEN_Msk (0x01 << LCD_START_MPUEN_Pos)
#define LCD_START_GO_Pos 1 //写1开始传输数据，数据传输结束后自动清零
#define LCD_START_GO_Msk (0x01 << LCD_START_GO_Pos)
#define LCD_START_BURST_Pos 2
#define LCD_START_BURST_Msk (0x01 << LCD_START_BURST_Pos)

#define LCD_CR0_VPIX_Pos 0 //当portrait为0时，表示垂直方向的像素个数，0表示1个，最大为767 \
                           //当portrait为1时，表示水平方向的像素个数，0表示1个，最大为767
#define LCD_CR0_VPIX_Msk (0x3FF << LCD_CR0_VPIX_Pos)
#define LCD_CR0_HPIX_Pos 10 //当portrait为0时，表示水平方向的像素个数，0表示1个，最大为1023 \
                            //当portrait为1时，表示垂直方向的像素个数，0表示1个，最大为1023
#define LCD_CR0_HPIX_Msk (0x3FF << LCD_CR0_HPIX_Pos)
#define LCD_CR0_DCLK_Pos 20 //0 DOTCLK一直翻转    1 DOTCLK在空闲时停在1
#define LCD_CR0_DCLK_Msk (0x01 << LCD_CR0_DCLK_Pos)
#define LCD_CR0_HLOW_Pos 21 //输出HSYNC低电平持续多少个DOTCLK周期，0表示1个周期
#define LCD_CR0_HLOW_Msk (0x03 << LCD_CR0_HLOW_Pos)

#define LCD_CR1_VFP_Pos 1
#define LCD_CR1_VFP_Msk (0x07 << LCD_CR1_VFP_Pos)
#define LCD_CR1_VBP_Pos 4
#define LCD_CR1_VBP_Msk (0x1F << LCD_CR1_VBP_Pos)
#define LCD_CR1_HFP_Pos 9
#define LCD_CR1_HFP_Msk (0x1F << LCD_CR1_HFP_Pos)
#define LCD_CR1_HBP_Pos 14
#define LCD_CR1_HBP_Msk (0x7F << LCD_CR1_HBP_Pos)
#define LCD_CR1_DCLKDIV_Pos 21 //DOTCLK相对于模块时钟的分频比，0表示2分频，1表示4分频 ...
#define LCD_CR1_DCLKDIV_Msk (0x1F << LCD_CR1_DCLKDIV_Pos)
#define LCD_CR1_DCLKINV_Pos 26 //1 输出DOTCLK反向，应用于用DOTCLK下降沿采样数据的屏
#define LCD_CR1_DCLKINV_Msk (0x01 << LCD_CR1_DCLKINV_Pos)

typedef struct
{
    __IO uint32_t DMA_MEM_ADDR;

    __IO uint32_t BLK; //Block Size and Count

    __IO uint32_t ARG; //Argument

    __IO uint32_t CMD; //Command

    __IO uint32_t RESP[4]; //Response

    __IO uint32_t DATA;

    __IO uint32_t STAT;

    __IO uint32_t CR1;

    __IO uint32_t CR2;

    __IO uint32_t IF;

    __IO uint32_t IFE; //Interrupt Flag Enable

    __IO uint32_t IE; //Interrupt Enalbe

    __IO uint32_t CMD12ERR;

    __IO uint32_t INFO;

    __IO uint32_t MAXCURR;
} SDIO_TypeDef;

#define SDIO_BLK_SIZE_Pos 0 //0x200 512字节   0x400 1024字节   0x800 2048字节
#define SDIO_BLK_SIZE_Msk (0xFFF << SDIO_BLK_SIZE_Pos)
#define SDIO_BLK_COUNT_Pos 16 //0 Stop Transfer    1 1块    2 2块    ... ...
#define SDIO_BLK_COUNT_Msk (0xFFF << SDIO_BLK_COUNT_Pos)

#define SDIO_CMD_DMAEN_Pos 0
#define SDIO_CMD_DMAEN_Msk (0x01 << SDIO_CMD_DMAEN_Pos)
#define SDIO_CMD_BLKCNTEN_Pos 1
#define SDIO_CMD_BLKCNTEN_Msk (0x01 << SDIO_CMD_BLKCNTEN_Pos)
#define SDIO_CMD_AUTOCMD12_Pos 2
#define SDIO_CMD_AUTOCMD12_Msk (0x01 << SDIO_CMD_AUTOCMD12_Pos)
#define SDIO_CMD_DIRREAD_Pos 4 //0 Write, Host to Card    1 Read, Card to Host
#define SDIO_CMD_DIRREAD_Msk (0x01 << SDIO_CMD_DIRREAD_Pos)
#define SDIO_CMD_MULTBLK_Pos 5 //0 Single Block    1  Multiple Block
#define SDIO_CMD_MULTBLK_Msk (0x01 << SDIO_CMD_MULTBLK_Pos)
#define SDIO_CMD_RESPTYPE_Pos 16 //响应类型，0 无响应    1 136位响应    2 48位响应    3 48位响应，Busy after response
#define SDIO_CMD_RESPTYPE_Msk (0x03 << SDIO_CMD_RESPTYPE_Pos)
#define SDIO_CMD_CRCCHECK_Pos 19 //Command CRC Check Enable
#define SDIO_CMD_CRCCHECK_Msk (0x01 << SDIO_CMD_CRCCHECK_Pos)
#define SDIO_CMD_IDXCHECK_Pos 20 //Command Index Check Enable
#define SDIO_CMD_IDXCHECK_Msk (0x01 << SDIO_CMD_IDXCHECK_Pos)
#define SDIO_CMD_HAVEDATA_Pos 21 //0 No Data Present    1 Data Present
#define SDIO_CMD_HAVEDATA_Msk (0x01 << SDIO_CMD_HAVEDATA_Pos)
#define SDIO_CMD_CMDTYPE_Pos 22 //0 NORMAL   1 SUSPEND    2 RESUME    3 ABORT
#define SDIO_CMD_CMDTYPE_Msk (0x03 << SDIO_CMD_CMDTYPE_Pos)
#define SDIO_CMD_CMDINDX_Pos 24 //Command Index，CMD0-63、ACMD0-63
#define SDIO_CMD_CMDINDX_Msk (0x3F << SDIO_CMD_CMDINDX_Pos)

#define SDIO_CR1_4BIT_Pos 1 //1 4 bit mode    0 1 bit mode
#define SDIO_CR1_4BIT_Msk (0x01 << SDIO_CR1_4BIT_Pos)
#define SDIO_CR1_8BIT_Pos 5 //1 8 bit mode is selected    0 8 bit mode is not selected
#define SDIO_CR1_8BIT_Msk (0x01 << SDIO_CR1_8BIT_Pos)
#define SDIO_CR1_CDBIT_Pos 6 //0 No Card    1 Card Inserted
#define SDIO_CR1_CDBIT_Msk (0x01 << SDIO_CR1_CDBIT_Pos)
#define SDIO_CR1_CDSRC_Pos 7 //Card Detect Source, 1 CR1.CDBIT位    0 SD_Detect引脚
#define SDIO_CR1_CDSRC_Msk (0x01 << SDIO_CR1_CDSRC_Pos)
#define SDIO_CR1_PWRON_Pos 8 //1 Power on    0 Power off
#define SDIO_CR1_PWRON_Msk (0x01 << SDIO_CR1_PWRON_Pos)
#define SDIO_CR1_VOLT_Pos 9 //7 3.3V    6 3.0V    5 1.8V
#define SDIO_CR1_VOLT_Msk (0x07 << SDIO_CR1_VOLT_Pos)

#define SDIO_CR2_CLKEN_Pos 0 //Internal Clock Enable
#define SDIO_CR2_CLKEN_Msk (0x01 << SDIO_CR2_CLKEN_Pos)
#define SDIO_CR2_CLKRDY_Pos 1 //Internal Clock Stable/Ready
#define SDIO_CR2_CLKRDY_Msk (0x01 << SDIO_CR2_CLKRDY_Pos)
#define SDIO_CR2_SDCLKEN_Pos 2 //SDCLK Enable
#define SDIO_CR2_SDCLKEN_Msk (0x01 << SDIO_CR2_SDCLKEN_Pos)
#define SDIO_CR2_SDCLKDIV_Pos 8 //SDCLK Frequency Div, 0x00 不分频    0x01 2分频    0x02 4分频    0x04 8分频    0x08    16分频    ...    0x80 256分频
#define SDIO_CR2_SDCLKDIV_Msk (0xFF << SDIO_CR2_SDCLKDIV_Pos)
#define SDIO_CR2_TIMEOUT_Pos 16 //0 TMCLK*2^13   1 TMCLK*2^14   ...   14 TMCLK*2^27
#define SDIO_CR2_TIMEOUT_Msk (0x0F << SDIO_CR2_TIMEOUT_Pos)
#define SDIO_CR2_RSTALL_Pos 24 //Software Reset for All
#define SDIO_CR2_RSTALL_Msk (0x01 << SDIO_CR2_RSTALL_Pos)
#define SDIO_CR2_RSTCMD_Pos 25 //Software Reset for CMD Line
#define SDIO_CR2_RSTCMD_Msk (0x01 << SDIO_CR2_RSTCMD_Pos)
#define SDIO_CR2_RSTDAT_Pos 26 //Software Reset for DAT Line
#define SDIO_CR2_RSTDAT_Msk (0x01 << SDIO_CR2_RSTDAT_Pos)

#define SDIO_IF_CMDDONE_Pos 0
#define SDIO_IF_CMDDONE_Msk (0x01 << SDIO_IF_CMDDONE_Pos)
#define SDIO_IF_TRXDONE_Pos 1
#define SDIO_IF_TRXDONE_Msk (0x01 << SDIO_IF_TRXDONE_Pos)
#define SDIO_IF_BLKGAP_Pos 2
#define SDIO_IF_BLKGAP_Msk (0x01 << SDIO_IF_BLKGAP_Pos)
#define SDIO_IF_DMADONE_Pos 3
#define SDIO_IF_DMADONE_Msk (0x01 << SDIO_IF_DMADONE_Pos)
#define SDIO_IF_BUFWRRDY_Pos 4
#define SDIO_IF_BUFWRRDY_Msk (0x01 << SDIO_IF_BUFWRRDY_Pos)
#define SDIO_IF_BUFRDRDY_Pos 5
#define SDIO_IF_BUFRDRDY_Msk (0x01 << SDIO_IF_BUFRDRDY_Pos)
#define SDIO_IF_CARDINSR_Pos 6
#define SDIO_IF_CARDINSR_Msk (0x01 << SDIO_IF_CARDINSR_Pos)
#define SDIO_IF_CARDRMOV_Pos 7
#define SDIO_IF_CARDRMOV_Msk (0x01 << SDIO_IF_CARDRMOV_Pos)
#define SDIO_IF_CARD_Pos 8
#define SDIO_IF_CARD_Msk (0x01 << SDIO_IF_CARD_Pos)
#define SDIO_IF_ERROR_Pos 15
#define SDIO_IF_ERROR_Msk (0x01 << SDIO_IF_ERROR_Pos)
#define SDIO_IF_CMDTIMEOUT_Pos 16
#define SDIO_IF_CMDTIMEOUT_Msk (0x01 << SDIO_IF_CMDTIMEOUT_Pos)
#define SDIO_IF_CMDCRCERR_Pos 17
#define SDIO_IF_CMDCRCERR_Msk (0x01 << SDIO_IF_CMDCRCERR_Pos)
#define SDIO_IF_CMDENDERR_Pos 18
#define SDIO_IF_CMDENDERR_Msk (0x01 << SDIO_IF_CMDENDCERR_Pos)
#define SDIO_IF_CMDIDXERR_Pos 19
#define SDIO_IF_CMDIDXERR_Msk (0x01 << SDIO_IF_CMDIDXCERR_Pos)
#define SDIO_IF_DATTIMEOUT_Pos 20
#define SDIO_IF_DATTIMEOUT_Msk (0x01 << SDIO_IF_DATTIMEOUT_Pos)
#define SDIO_IF_DATCRCERR_Pos 21
#define SDIO_IF_DATCRCERR_Msk (0x01 << SDIO_IF_DATCRCERR_Pos)
#define SDIO_IF_DATENDERR_Pos 22
#define SDIO_IF_DATENDERR_Msk (0x01 << SDIO_IF_DATENDCERR_Pos)
#define SDIO_IF_CURLIMERR_Pos 23
#define SDIO_IF_CURLIMERR_Msk (0x01 << SDIO_IF_CURLIMERR_Pos)
#define SDIO_IF_CMD12ERR_Pos 24
#define SDIO_IF_CMD12ERR_Msk (0x01 << SDIO_IF_CMD12ERR_Pos)
#define SDIO_IF_DMAERR_Pos 25
#define SDIO_IF_DMAERR_Msk (0x01 << SDIO_IF_DMAERR_Pos)
#define SDIO_IF_RESPERR_Pos 28
#define SDIO_IF_RESPERR_Msk (0x01 << SDIO_IF_RESPERR_Pos)

#define SDIO_IE_CMDDONE_Pos 0 //Command Complete Status Enable
#define SDIO_IE_CMDDONE_Msk (0x01 << SDIO_IE_CMDDONE_Pos)
#define SDIO_IE_TRXDONE_Pos 1 //Transfer Complete Status Enable
#define SDIO_IE_TRXDONE_Msk (0x01 << SDIO_IE_TRXDONE_Pos)
#define SDIO_IE_BLKGAP_Pos 2 //Block Gap Event Status Enable
#define SDIO_IE_BLKGAP_Msk (0x01 << SDIO_IE_BLKGAP_Pos)
#define SDIO_IE_DMADONE_Pos 3 //DMA Interrupt Status Enable
#define SDIO_IE_DMADONE_Msk (0x01 << SDIO_IE_DMADONE_Pos)
#define SDIO_IE_BUFWRRDY_Pos 4 //Buffer Write Ready Status Enable
#define SDIO_IE_BUFWRRDY_Msk (0x01 << SDIO_IE_BUFWRRDY_Pos)
#define SDIO_IE_BUFRDRDY_Pos 5 //Buffer Read Ready Status Enable
#define SDIO_IE_BUFRDRDY_Msk (0x01 << SDIO_IE_BUFRDRDY_Pos)
#define SDIO_IE_CARDINSR_Pos 6 //Card Insertion Status Enable
#define SDIO_IE_CARDINSR_Msk (0x01 << SDIO_IE_CARDINSR_Pos)
#define SDIO_IE_CARDRMOV_Pos 7 //Card Removal Status Enable
#define SDIO_IE_CARDRMOV_Msk (0x01 << SDIO_IE_CARDRMOV_Pos)
#define SDIO_IE_CARD_Pos 8
#define SDIO_IE_CARD_Msk (0x01 << SDIO_IE_CARD_Pos)
#define SDIO_IE_CMDTIMEOUT_Pos 16 //Command Timeout Error Status Enable
#define SDIO_IE_CMDTIMEOUT_Msk (0x01 << SDIO_IE_CMDTIMEOUT_Pos)
#define SDIO_IE_CMDCRCERR_Pos 17 //Command CRC Error Status Enable
#define SDIO_IE_CMDCRCERR_Msk (0x01 << SDIO_IE_CMDCRCERR_Pos)
#define SDIO_IE_CMDENDERR_Pos 18 //Command End Bit Error Status Enable
#define SDIO_IE_CMDENDERR_Msk (0x01 << SDIO_IE_CMDENDCERR_Pos)
#define SDIO_IE_CMDIDXERR_Pos 19 //Command Index Error Status Enable
#define SDIO_IE_CMDIDXERR_Msk (0x01 << SDIO_IE_CMDIDXCERR_Pos)
#define SDIO_IE_DATTIMEOUT_Pos 20 //Data Timeout Error Status Enable
#define SDIO_IE_DATTIMEOUT_Msk (0x01 << SDIO_IE_DATTIMEOUT_Pos)
#define SDIO_IE_DATCRCERR_Pos 21 //Data CRC Error Status Enable
#define SDIO_IE_DATCRCERR_Msk (0x01 << SDIO_IE_DATCRCERR_Pos)
#define SDIO_IE_DATENDERR_Pos 22 //Data End Bit Error Status Enable
#define SDIO_IE_DATENDERR_Msk (0x01 << SDIO_IE_DATENDCERR_Pos)
#define SDIO_IE_CURLIMERR_Pos 23 //Current Limit Error Status Enable
#define SDIO_IE_CURLIMERR_Msk (0x01 << SDIO_IE_CURLIMERR_Pos)
#define SDIO_IE_CMD12ERR_Pos 24 //Auto CMD12 Error Status Enable
#define SDIO_IE_CMD12ERR_Msk (0x01 << SDIO_IE_CMD12ERR_Pos)
#define SDIO_IE_DMAERR_Pos 25 //ADMA Error Status Enable
#define SDIO_IE_DMAERR_Msk (0x01 << SDIO_IE_DMAERR_Pos)
#define SDIO_IE_RESPERR_Pos 28 //Target Response Error Status Enable
#define SDIO_IE_RESPERR_Msk (0x01 << SDIO_IE_RESPERR_Pos)

#define SDIO_IM_CMDDONE_Pos 0
#define SDIO_IM_CMDDONE_Msk (0x01 << SDIO_IM_CMDDONE_Pos)
#define SDIO_IM_TRXDONE_Pos 1
#define SDIO_IM_TRXDONE_Msk (0x01 << SDIO_IM_TRXDONE_Pos)
#define SDIO_IM_BLKGAP_Pos 2
#define SDIO_IM_BLKGAP_Msk (0x01 << SDIO_IM_BLKGAP_Pos)
#define SDIO_IM_DMADONE_Pos 3
#define SDIO_IM_DMADONE_Msk (0x01 << SDIO_IM_DMADONE_Pos)
#define SDIO_IM_BUFWRRDY_Pos 4
#define SDIO_IM_BUFWRRDY_Msk (0x01 << SDIO_IM_BUFWRRDY_Pos)
#define SDIO_IM_BUFRDRDY_Pos 5
#define SDIO_IM_BUFRDRDY_Msk (0x01 << SDIO_IM_BUFRDRDY_Pos)
#define SDIO_IM_CARDINSR_Pos 6
#define SDIO_IM_CARDINSR_Msk (0x01 << SDIO_IM_CARDINSR_Pos)
#define SDIO_IM_CARDRMOV_Pos 7
#define SDIO_IM_CARDRMOV_Msk (0x01 << SDIO_IM_CARDRMOV_Pos)
#define SDIO_IM_CARD_Pos 8
#define SDIO_IM_CARD_Msk (0x01 << SDIO_IM_CARD_Pos)
#define SDIO_IM_CMDTIMEOUT_Pos 16
#define SDIO_IM_CMDTIMEOUT_Msk (0x01 << SDIO_IM_CMDTIMEOUT_Pos)
#define SDIO_IM_CMDCRCERR_Pos 17
#define SDIO_IM_CMDCRCERR_Msk (0x01 << SDIO_IM_CMDCRCERR_Pos)
#define SDIO_IM_CMDENDERR_Pos 18
#define SDIO_IM_CMDENDERR_Msk (0x01 << SDIO_IM_CMDENDCERR_Pos)
#define SDIO_IM_CMDIDXERR_Pos 19
#define SDIO_IM_CMDIDXERR_Msk (0x01 << SDIO_IM_CMDIDXCERR_Pos)
#define SDIO_IM_DATTIMEOUT_Pos 20
#define SDIO_IM_DATTIMEOUT_Msk (0x01 << SDIO_IM_DATTIMEOUT_Pos)
#define SDIO_IM_DATCRCERR_Pos 21
#define SDIO_IM_DATCRCERR_Msk (0x01 << SDIO_IM_DATCRCERR_Pos)
#define SDIO_IM_DATENDERR_Pos 22
#define SDIO_IM_DATENDERR_Msk (0x01 << SDIO_IM_DATENDCERR_Pos)
#define SDIO_IM_CURLIMERR_Pos 23
#define SDIO_IM_CURLIMERR_Msk (0x01 << SDIO_IM_CURLIMERR_Pos)
#define SDIO_IM_CMD12ERR_Pos 24
#define SDIO_IM_CMD12ERR_Msk (0x01 << SDIO_IM_CMD12ERR_Pos)
#define SDIO_IM_DMAERR_Pos 25
#define SDIO_IM_DMAERR_Msk (0x01 << SDIO_IM_DMAERR_Pos)
#define SDIO_IM_RESPERR_Pos 28
#define SDIO_IM_RESPERR_Msk (0x01 << SDIO_IM_RESPERR_Pos)

typedef struct
{
    __IO uint32_t DATA;
    __IO uint32_t ADDR;
    __IO uint32_t _ERASE; //和mmcsd_cmd.h(59)名字冲突，这里修改为_ERASE
    __IO uint32_t CACHE;
    __IO uint32_t CFG0;
    __IO uint32_t CFG1;
    __IO uint32_t CFG2;
    __IO uint32_t CFG3;
    __IO uint32_t STAT;
} FLASH_Typedef;

#define FLASH_ERASE_REQ_Pos 31
#define FLASH_ERASE_REQ_Msk (0x01u << FLASH_ERASE_REQ_Pos)

#define FLASH_CACHE_PROG_Pos 2
#define FLASH_CACHE_PROG_Msk (0x01 << FLASH_CACHE_PROG_Pos)
#define FLASH_CACHE_CLEAR_Pos 3
#define FLASH_CACHE_CLEAR_Msk (0x01 << FLASH_CACHE_CLEAR_Pos)

#define FLASH_STAT_ERASE_GOING_Pos 0
#define FLASH_STAT_ERASE_GOING_Msk (0X01 << FLASH_STAT_ERASE_GOING_Pos)
#define FLASH_STAT_PROG_GOING_Pos 1
#define FLASH_STAT_PROG_GOING_Msk (0x01 << FLASH_STAT_PROG_GOING_Pos)
#define FALSH_STAT_FIFO_EMPTY_Pos 3
#define FLASH_STAT_FIFO_EMPTY_Msk (0x01 << FALSH_STAT_FIFO_EMPTY_Pos)
#define FALSH_STAT_FIFO_FULL_Pos 4
#define FLASH_STAT_FIFO_FULL_Msk (0x01 << FALSH_STAT_FIFO_FULL_Pos)

typedef struct
{
    __IO uint32_t CR;
} SRAMC_TypeDef;

#define SRAMC_CR_RWTIME_Pos 0 //读写操作持续多少个时钟周期。0表示1个时钟周期。最小设置为4
#define SRAMC_CR_RWTIME_Msk (0x0F << SRAMC_CR_RWTIME_Pos)
#define SRAMC_CR_BYTEIF_Pos 4 //外部SRAM数据宽度，0 16位    1 8位
#define SRAMC_CR_BYTEIF_Msk (0x01 << SRAMC_CR_BYTEIF_Pos)
#define SRAMC_CR_HBLBDIS_Pos 5 //1 ADDR[23:22]为地址线   0 ADDR[23]为高字节使能，ADDR[22]为低字节使能
#define SRAMC_CR_HBLBDIS_Msk (0x01 << SRAMC_CR_HBLBDIS_Pos)

typedef struct
{
    __IO uint32_t CR0;

    __IO uint32_t CR1;

    __IO uint32_t REFRESH;

    __IO uint32_t NOPNUM; //[15:0] 初始化完成后，在正常操作之前，发送多少个NOP命令

    __IO uint32_t LATCH;

    __IO uint32_t REFDONE; //[0] Frefresh Done，上电初始化完成
} SDRAMC_TypeDef;

#define SDRAMC_CR0_BURSTLEN_Pos 0 //必须取2，表示Burst Length为4
#define SDRAMC_CR0_BURSTLEN_Msk (0x07 << SDRAMC_CR0_BURSTLEN_Pos)
#define SDRAMC_CR0_CASDELAY_Pos 4 //CAS Latency， 2 2    3 3
#define SDRAMC_CR0_CASDELAY_Msk (0x07 << SDRAMC_CR0_CASDELAY_Pos)

#define SDRAMC_CR1_TRP_Pos 0
#define SDRAMC_CR1_TRP_Msk (0x07 << SDRAMC_CR1_TRP_Pos)
#define SDRAMC_CR1_TRCD_Pos 3
#define SDRAMC_CR1_TRCD_Msk (0x07 << SDRAMC_CR1_TRCD_Pos)
#define SDRAMC_CR1_TRC_Pos 6
#define SDRAMC_CR1_TRC_Msk (0x0F << SDRAMC_CR1_TRC_Pos)
#define SDRAMC_CR1_TRAS_Pos 10
#define SDRAMC_CR1_TRAS_Msk (0x07 << SDRAMC_CR1_TRAS_Pos)
#define SDRAMC_CR1_TRRD_Pos 13
#define SDRAMC_CR1_TRRD_Msk (0x03 << SDRAMC_CR1_TRRD_Pos)
#define SDRAMC_CR1_TMRD_Pos 15
#define SDRAMC_CR1_TMRD_Msk (0x07 << SDRAMC_CR1_TMRD_Pos)
#define SDRAMC_CR1_32BIT_Pos 18 //SDRAMC的接口数据位宽，1 32bit    0 16bit
#define SDRAMC_CR1_32BIT_Msk (0x01 << SDRAMC_CR1_32BIT_Pos)
#define SDRAMC_CR1_BANK_Pos 19 //SDRAM每个颗粒有几个bank，0 2 banks    1 4 banks
#define SDRAMC_CR1_BANK_Msk (0x01 << SDRAMC_CR1_BANK_Pos)
#define SDRAMC_CR1_CELL32BIT_Pos 20 //SDRAM颗粒的位宽，1 32bit    0 16bit
#define SDRAMC_CR1_CELL32BIT_Msk (0x01 << SDRAMC_CR1_CELL32BIT_Pos)
#define SDRAMC_CR1_CELLSIZE_Pos 21 //SDRAM颗粒的容量，0 64Mb    1 128Mb    2 256Mb    3 16Mb
#define SDRAMC_CR1_CELLSIZE_Msk (0x03 << SDRAMC_CR1_CELLSIZE_Pos)
#define SDRAMC_CR1_HIGHSPEED_Pos 23 //当hclk大于100MHz时，这一位必须配置为1，否则为0
#define SDRAMC_CR1_HIGHSPEED_Msk (0x01 << SDRAMC_CR1_HIGHSPEED_Pos)

#define SDRAMC_REFRESH_RATE_Pos 0
#define SDRAMC_REFRESH_RATE_Msk (0xFFF << SDRAMC_REFRESH_RATE_Pos)
#define SDRAMC_REFRESH_EN_Pos 12
#define SDRAMC_REFRESH_EN_Msk (0x01 << SDRAMC_REFRESH_EN_Pos)

#define SDRAMC_LATCH_INEDGE_Pos 0 //哪个沿来锁存从SDRAM中读回的数据，0 上升沿    1 下降沿
#define SDRAMC_LATCH_INEDGE_Msk (0x01 << SDRAMC_LATCH_INEDGE_Pos)
#define SDRAMC_LATCH_OUTEDGE_Pos 1 //哪个沿去锁存送给SDRAM的数据，1 上升沿    0 下降沿
#define SDRAMC_LATCH_OUTEDGE_Msk (0x01 << SDRAMC_LATCH_OUTEDGE_Pos)
#define SDRAMC_LATCH_WAITST_Pos 2
#define SDRAMC_LATCH_WAITST_Msk (0x01 << SDRAMC_LATCH_WAITST_Pos)

typedef struct
{
    __IO uint32_t IE;

    __IO uint32_t IF; //写1清零

    __IO uint32_t IM;

    __IO uint32_t CR;

    __IO uint32_t ADDR;

    __IO uint32_t CMD;
} NORFLC_TypeDef;

#define NORFLC_IE_FINISH_Pos 0
#define NORFLC_IE_FINISH_Msk (0x01 << NORFLC_IE_FINISH_Pos)
#define NORFLC_IE_TIMEOUT_Pos 1
#define NORFLC_IE_TIMEOUT_Msk (0x01 << NORFLC_IE_TIMEOUT_Pos)

#define NORFLC_IF_FINISH_Pos 0
#define NORFLC_IF_FINISH_Msk (0x01 << NORFLC_IF_FINISH_Pos)
#define NORFLC_IF_TIMEOUT_Pos 1
#define NORFLC_IF_TIMEOUT_Msk (0x01 << NORFLC_IF_TIMEOUT_Pos)

#define NORFLC_IM_FINISH_Pos 0
#define NORFLC_IM_FINISH_Msk (0x01 << NORFLC_IM_FINISH_Pos)
#define NORFLC_IM_TIMEOUT_Pos 1
#define NORFLC_IM_TIMEOUT_Msk (0x01 << NORFLC_IM_TIMEOUT_Pos)

#define NORFLC_CR_RDTIME_Pos 0 //Oen下降沿后多少个时钟周期后采样读回的数据。0表示1个时钟周期
#define NORFLC_CR_RDTIME_Msk (0x1F << NORFLC_CR_RDTIME_Pos)
#define NORFLC_CR_WRTIME_Pos 5 //输出Wen的低电平宽度。0表示1个时钟周期
#define NORFLC_CR_WRTIME_Msk (0x07 << NORFLC_CR_WRTIME_Pos)
#define NORFLC_CR_BYTEIF_Pos 8 //外部NOR FLASH数据宽度，1 8位    0 16位
#define NORFLC_CR_BYTEIF_Msk (0x01 << NORFLC_CR_BYTEIF_Pos)

#define NORFLC_CMD_DATA_Pos 0 //在PROGRAM命令中，DATA是要写入NOR FLASH的数据；在READ命令中，DATA是从NOR FLASH读回的数据
#define NORFLC_CMD_DATA_Msk (0xFFFF << NORFLC_CMD_DATA_Pos)
#define NORFLC_CMD_CMD_Pos 16 //需要执行的命令，0 READ   1 RESET   2 AUTOMATIC SELECT   3 PROGRAM   4 CHIP ERASE   5 SECTOR ERASE
#define NORFLC_CMD_CMD_Msk (0x07 << NORFLC_CMD_CMD_Pos)

typedef struct
{
    __IO uint32_t CR;

    __O uint32_t DATAIN;

    __IO uint32_t INIVAL;

    __I uint32_t RESULT;
} CRC_TypeDef;

#define CRC_CR_EN_Pos 0
#define CRC_CR_EN_Msk (0x01 << CRC_CR_EN_Pos)
#define CRC_CR_OREV_Pos 1 //输出结果是否翻转
#define CRC_CR_OREV_Msk (0x01 << CRC_CR_OREV_Pos)
#define CRC_CR_ONOT_Pos 2 //输出结果是否取反
#define CRC_CR_ONOT_Msk (0x01 << CRC_CR_ONOT_Pos)
#define CRC_CR_CRC16_Pos 3 //1 CRC16    0 CRC32
#define CRC_CR_CRC16_Msk (0x01 << CRC_CR_CRC16_Pos)
#define CRC_CR_IBITS_Pos 4 //输入数据有效位数 0 32位    1 16位    2 8位
#define CRC_CR_IBITS_Msk (0x03 << CRC_CR_IBITS_Pos)

typedef struct
{
    __IO uint32_t MINSEC; //分秒计数

    __IO uint32_t DATHUR; //日时计数

    __IO uint32_t MONDAY; //月周计数

    __IO uint32_t YEAR; //[11:0] 年计数，支持1901-2199

    __IO uint32_t MINSECAL; //分秒闹铃设置

    __IO uint32_t DAYHURAL; //周时闹铃设置

    __IO uint32_t LOAD; //将设置寄存器中的值同步到RTC中，同步完成自动清零

    __IO uint32_t IE;

    __IO uint32_t IF; //写1清零

    __IO uint32_t EN; //[0] 1 RTC使能

    __IO uint32_t CFGABLE; //[0] 1 RTC可配置

    __IO uint32_t TRIM; //时钟调整

    __IO uint32_t TRIMM; //时钟微调整
} RTC_TypeDef;

#define RTC_LOAD_TIME_Pos 0
#define RTC_LOAD_TIME_Msk (0x01 << RTC_LOAD_TIME_Pos)
#define RTC_LOAD_ALARM_Pos 1
#define RTC_LOAD_ALARM_Msk (0x01 << RTC_LOAD_ALARM_Pos)

#define RTC_MINSEC_SEC_Pos 0 //秒计数，取值0--59
#define RTC_MINSEC_SEC_Msk (0x3F << RTC_MINSEC_SEC_Pos)
#define RTC_MINSEC_MIN_Pos 6 //分钟计数，取值0--59
#define RTC_MINSEC_MIN_Msk (0x3F << RTC_MINSEC_MIN_Pos)

#define RTC_DATHUR_HOUR_Pos 0 //小时计数，取值0--23
#define RTC_DATHUR_HOUR_Msk (0x1F << RTC_DATHUR_HOUR_Pos)
#define RTC_DATHUR_DATE_Pos 5 //date of month，取值1--31
#define RTC_DATHUR_DATE_Msk (0x1F << RTC_DATHUR_DATE_Pos)

#define RTC_MONDAY_DAY_Pos 0 //day of week，取值0--6
#define RTC_MONDAY_DAY_Msk (0x07 << RTC_MONDAY_DAY_Pos)
#define RTC_MONDAY_MON_Pos 3 //月份计数，取值1--12
#define RTC_MONDAY_MON_Msk (0x0F << RTC_MONDAY_MON_Pos)

#define RTC_MINSECAL_SEC_Pos 0 //闹钟秒设置
#define RTC_MINSECAL_SEC_Msk (0x3F << RTC_MINSECAL_SEC_Pos)
#define RTC_MINSECAL_MIN_Pos 6 //闹钟分钟设置
#define RTC_MINSECAL_MIN_Msk (0x3F << RTC_MINSECAL_MIN_Pos)

#define RTC_DAYHURAL_HOUR_Pos 0 //闹钟小时设置
#define RTC_DAYHURAL_HOUR_Msk (0x1F << RTC_DAYHURAL_HOUR_Pos)
#define RTC_DAYHURAL_SUN_Pos 5 //周日闹钟有效
#define RTC_DAYHURAL_SUN_Msk (0x01 << RTC_DAYHURAL_SUN_Pos)
#define RTC_DAYHURAL_MON_Pos 6 //周一闹钟有效
#define RTC_DAYHURAL_MON_Msk (0x01 << RTC_DAYHURAL_MON_Pos)
#define RTC_DAYHURAL_TUE_Pos 7 //周二闹钟有效
#define RTC_DAYHURAL_TUE_Msk (0x01 << RTC_DAYHURAL_TUE_Pos)
#define RTC_DAYHURAL_WED_Pos 8 //周三闹钟有效
#define RTC_DAYHURAL_WED_Msk (0x01 << RTC_DAYHURAL_WED_Pos)
#define RTC_DAYHURAL_THU_Pos 9 //周四闹钟有效
#define RTC_DAYHURAL_THU_Msk (0x01 << RTC_DAYHURAL_THU_Pos)
#define RTC_DAYHURAL_FRI_Pos 10 //周五闹钟有效
#define RTC_DAYHURAL_FRI_Msk (0x01 << RTC_DAYHURAL_FRI_Pos)
#define RTC_DAYHURAL_SAT_Pos 11 //周六闹钟有效
#define RTC_DAYHURAL_SAT_Msk (0x01 << RTC_DAYHURAL_SAT_Pos)

#define RTC_IE_SEC_Pos 0 //秒中断使能
#define RTC_IE_SEC_Msk (0x01 << RTC_IE_SEC_Pos)
#define RTC_IE_MIN_Pos 1
#define RTC_IE_MIN_Msk (0x01 << RTC_IE_MIN_Pos)
#define RTC_IE_HOUR_Pos 2
#define RTC_IE_HOUR_Msk (0x01 << RTC_IE_HOUR_Pos)
#define RTC_IE_DATE_Pos 3
#define RTC_IE_DATE_Msk (0x01 << RTC_IE_DATE_Pos)
#define RTC_IE_ALARM_Pos 4
#define RTC_IE_ALARM_Msk (0x01 << RTC_IE_ALARM_Pos)

#define RTC_IF_SEC_Pos 0 //写1清零
#define RTC_IF_SEC_Msk (0x01 << RTC_IF_SEC_Pos)
#define RTC_IF_MIN_Pos 1
#define RTC_IF_MIN_Msk (0x01 << RTC_IF_MIN_Pos)
#define RTC_IF_HOUR_Pos 2
#define RTC_IF_HOUR_Msk (0x01 << RTC_IF_HOUR_Pos)
#define RTC_IF_DATE_Pos 3
#define RTC_IF_DATE_Msk (0x01 << RTC_IF_DATE_Pos)
#define RTC_IF_ALARM_Pos 4
#define RTC_IF_ALARM_Msk (0x01 << RTC_IF_ALARM_Pos)

#define RTC_TRIM_ADJ_Pos 0 //用于调整BASECNT的计数周期，默认为32768，如果DEC为1，则计数周期调整为32768-ADJ，否则调整为32768+ADJ
#define RTC_TRIM_ADJ_Msk (0xFF << RTC_TRIM_ADJ_Pos)
#define RTC_TRIM_DEC_Pos 8
#define RTC_TRIM_DEC_Msk (0x01 << RTC_TRIM_DEC_Pos)

#define RTC_TRIMM_CYCLE_Pos 0 //用于计数周期微调，如果INC为1，则第n个计数周期调整为(32768±ADJ)+1,否则调整为(32768±ADJ)-1 \
                              //cycles=0时，不进行微调整；cycles=1，则n为2；cycles=7，则n为8；以此类推
#define RTC_TRIMM_CYCLE_Msk (0x07 << RTC_TRIMM_CYCLE_Pos)
#define RTC_TRIMM_INC_Pos 3
#define RTC_TRIMM_INC_Msk (0x01 << RTC_TRIMM_INC_Pos)

typedef struct
{
    __IO uint32_t LOAD; //喂狗使计数器装载LOAD值

    __I uint32_t VALUE;

    __IO uint32_t CR;

    __IO uint32_t IF; //计数到0时硬件置位，软件写1清除标志

    __IO uint32_t FEED; //写0x55喂狗
} WDT_TypeDef;

#define WDT_CR_EN_Pos 0
#define WDT_CR_EN_Msk (0x01 << WDT_CR_EN_Pos)
#define WDT_CR_RSTEN_Pos 1
#define WDT_CR_RSTEN_Msk (0x01 << WDT_CR_RSTEN_Pos)

/******************************************************************************/
/*						 Peripheral memory map							  */
/******************************************************************************/
#define RAM_BASE 0x20000000
#define AHB_BASE 0x40000000
#define APB_BASE 0x40010000

#define NORFLC_BASE 0x60000000
#define NORFLM_BASE 0x61000000

#define SRAMC_BASE 0x68000000
#define SRAMM_BASE 0x69000000

#define SDRAMC_BASE 0x78000000
#define SDRAMM_BASE 0x70000000

/* AHB Peripheral memory map */
#define SYS_BASE (AHB_BASE + 0x00000)

#define DMA_BASE (AHB_BASE + 0x01000)

#define LCD_BASE (AHB_BASE + 0x02000)

#define CRC_BASE (AHB_BASE + 0x03000)

#define SDIO_BASE (AHB_BASE + 0x04000)

/* APB Peripheral memory map */
#define PORT_BASE (APB_BASE + 0x00000)

#define GPIOA_BASE (APB_BASE + 0x01000)
#define GPIOB_BASE (APB_BASE + 0x02000)
#define GPIOC_BASE (APB_BASE + 0x03000)
#define GPIOD_BASE (APB_BASE + 0x04000)
#define GPIOM_BASE (APB_BASE + 0x05000)
#define GPION_BASE (APB_BASE + 0x06000)
#define GPIOP_BASE (APB_BASE + 0x08000)

#define TIMR0_BASE (APB_BASE + 0x07000)
#define TIMR1_BASE (APB_BASE + 0x0700C)
#define TIMR2_BASE (APB_BASE + 0x07018)
#define TIMR3_BASE (APB_BASE + 0x07024)
#define TIMR4_BASE (APB_BASE + 0x07030)
#define TIMR5_BASE (APB_BASE + 0x0703C)
#define TIMRG_BASE (APB_BASE + 0x07060)

#define WDT_BASE (APB_BASE + 0x09000)

#define PWM0_BASE (APB_BASE + 0x0A000)
#define PWM1_BASE (APB_BASE + 0x0A020)
#define PWM2_BASE (APB_BASE + 0x0A040)
#define PWM3_BASE (APB_BASE + 0x0A060)
#define PWM4_BASE (APB_BASE + 0x0A080)
#define PWM5_BASE (APB_BASE + 0x0A0A0)
#define PWMG_BASE (APB_BASE + 0x0A180)

#define RTC_BASE (APB_BASE + 0x0B000)

#define ADC0_BASE (APB_BASE + 0x0C000)
#define ADC1_BASE (APB_BASE + 0x0D000)

#define FLASH_BASE (APB_BASE + 0x0F000)

#define UART0_BASE (APB_BASE + 0x10000)
#define UART1_BASE (APB_BASE + 0x11000)
#define UART2_BASE (APB_BASE + 0x12000)
#define UART3_BASE (APB_BASE + 0x13000)

#define I2C0_BASE (APB_BASE + 0x18000)
#define I2C1_BASE (APB_BASE + 0x19000)

#define SPI0_BASE (APB_BASE + 0x1C000)
#define SPI1_BASE (APB_BASE + 0x1D000)

#define CAN_BASE (APB_BASE + 0x20000)

/******************************************************************************/
/*						 Peripheral declaration							 */
/******************************************************************************/
#define SYS ((SYS_TypeDef *)SYS_BASE)

#define PORT ((PORT_TypeDef *)PORT_BASE)

#define GPIOA ((GPIO_TypeDef *)GPIOA_BASE)
#define GPIOB ((GPIO_TypeDef *)GPIOB_BASE)
#define GPIOC ((GPIO_TypeDef *)GPIOC_BASE)
#define GPIOM ((GPIO_TypeDef *)GPIOM_BASE)
#define GPION ((GPIO_TypeDef *)GPION_BASE)
#define GPIOP ((GPIO_TypeDef *)GPIOP_BASE)

#define TIMR0 ((TIMR_TypeDef *)TIMR0_BASE)
#define TIMR1 ((TIMR_TypeDef *)TIMR1_BASE)
#define TIMR2 ((TIMR_TypeDef *)TIMR2_BASE)
#define TIMR3 ((TIMR_TypeDef *)TIMR3_BASE)
#define TIMR4 ((TIMR_TypeDef *)TIMR4_BASE)
#define TIMR5 ((TIMR_TypeDef *)TIMR5_BASE)
#define TIMRG ((TIMRG_TypeDef *)TIMRG_BASE)

#define UART0 ((UART_TypeDef *)UART0_BASE)
#define UART1 ((UART_TypeDef *)UART1_BASE)
#define UART2 ((UART_TypeDef *)UART2_BASE)
#define UART3 ((UART_TypeDef *)UART3_BASE)

#define SPI0 ((SPI_TypeDef *)SPI0_BASE)
#define SPI1 ((SPI_TypeDef *)SPI1_BASE)

#define I2C0 ((I2C_TypeDef *)I2C0_BASE)
#define I2C1 ((I2C_TypeDef *)I2C1_BASE)

#define ADC0 ((ADC_TypeDef *)ADC0_BASE)
#define ADC1 ((ADC_TypeDef *)ADC1_BASE)

#define PWM0 ((PWM_TypeDef *)PWM0_BASE)
#define PWM1 ((PWM_TypeDef *)PWM1_BASE)
#define PWM2 ((PWM_TypeDef *)PWM2_BASE)
#define PWM3 ((PWM_TypeDef *)PWM3_BASE)
#define PWM4 ((PWM_TypeDef *)PWM4_BASE)
#define PWM5 ((PWM_TypeDef *)PWM5_BASE)
#define PWMG ((PWMG_TypeDef *)PWMG_BASE)

#define SDIO ((SDIO_TypeDef *)SDIO_BASE)

#define DMA ((DMA_TypeDef *)DMA_BASE)

#define CAN ((CAN_TypeDef *)CAN_BASE)

#define LCD ((LCD_TypeDef *)LCD_BASE)

#define CRC ((CRC_TypeDef *)CRC_BASE)

#define RTC ((RTC_TypeDef *)RTC_BASE)

#define WDT ((WDT_TypeDef *)WDT_BASE)

#define FLASH ((FLASH_Typedef *)FLASH_BASE)

#define SRAMC ((SRAMC_TypeDef *)SRAMC_BASE)

#define NORFLC ((NORFLC_TypeDef *)NORFLC_BASE)

#define SDRAMC ((SDRAMC_TypeDef *)SDRAMC_BASE)

typedef void (*Func_void_void)(void);

#include "SWM320_port.h"
#include "SWM320_gpio.h"
#include "SWM320_exti.h"
#include "SWM320_timr.h"
#include "SWM320_uart.h"
#include "SWM320_spi.h"
#include "SWM320_i2c.h"
#include "SWM320_pwm.h"
#include "SWM320_adc.h"
#include "SWM320_dma.h"
#include "SWM320_lcd.h"
#include "SWM320_can.h"
#include "SWM320_sdio.h"
#include "SWM320_flash.h"
#include "SWM320_norflash.h"
#include "SWM320_sdram.h"
#include "SWM320_sram.h"
#include "SWM320_crc.h"
#include "SWM320_rtc.h"
#include "SWM320_wdt.h"

#endif //__SWM320_H__