rt-thread/bsp/Infineon/xmc7200-kit_xmc7200_evk/board/linker_scripts/link.ld

/***************************************************************************//**
* \file xmc7200_x8384_cm7.ld
* \version 1.0.0
*
* Linker file for the GNU C compiler.
*
* The main purpose of the linker script is to describe how the sections in the
* input files should be mapped into the output file, and to control the memory
* layout of the output file.
*
* \note The entry point location is fixed and starts at 0x10000000. The valid
* application image should be placed there.
*
* \note The linker files included with the PDL template projects must be generic
* and handle all common use cases. Your project may not use every section
* defined in the linker files. In that case you may see warnings during the
* build process. In your project, you can simply comment out or remove the
* relevant code in the linker file.
*
********************************************************************************
* \copyright
* Copyright 2021 Cypress Semiconductor Corporation
* SPDX-License-Identifier: Apache-2.0
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
*     http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*******************************************************************************/

OUTPUT_FORMAT ("elf32-littlearm", "elf32-bigarm", "elf32-littlearm")
GROUP(-lgcc -lc -lnosys )
SEARCH_DIR(.)
GROUP(libgcc.a libc.a libm.a libnosys.a)
ENTRY(Reset_Handler)

/* The size of the stack section at the end of CM7 SRAM */
STACK_SIZE = 0x1000;
RAMVECTORS_ALIGNMENT                = 128;

sram_start_reserve                  = 0;

sram_total_size                     = 0x00100000; /* SRAM0 + SRAM1 */
sram_private_for_srom               = 0x00000800; /* Private SRAM for SROM (e.g. API processing) */
sram_used_by_boot                   = 0x0; /* Used during boot by Cypress firmware (content will be overwritten on reset, so it should not be used for loadable sections in case of RAM build configurations) */

cm0plus_sram_reserve                = 0x00004000; /* 16K   : cm0 sram size */
cm7_0_sram_reserve                  = 0x000FC000; /* 1008K : cm7_0 sram size */

code_flash_total_size               = 0x00830000; /* 8384K: total flash size */
cm0plus_code_flash_reserve          = 0x00080000; /* 512K : cm0 flash size */
cm7_0_code_flash_reserve            = 0x007B0000; /* 7872K: cm7_0 flash size */

code_flash_base_address             = 0x10000000;
sram_base_address                   = 0x28000000;

/* SRAM reservations */
_base_SRAM_CM7_0                    = sram_base_address + cm0plus_sram_reserve;
_size_SRAM_CM7_0                    = cm7_0_sram_reserve;

/* Code flash reservations */
_base_CODE_FLASH_CM0P               = code_flash_base_address;
_size_CODE_FLASH_CM0P               = cm0plus_code_flash_reserve;
_base_CODE_FLASH_CM7_0              = code_flash_base_address + cm0plus_code_flash_reserve;
_size_CODE_FLASH_CM7_0              = cm7_0_code_flash_reserve;

/* Fixed Addresses */
_base_WORK_FLASH                    = 0x14000000;
_size_WORK_FLASH                    = 0x00040000;   /* 256K Work flash */
_base_CM7_0_ITCM                    = 0x00000000;
_size_CM7_0_ITCM                    = 0x00004000;
_base_CM7_0_DTCM                    = 0x20000000;
_size_CM7_0_DTCM                    = 0x00004000;

/* For the non-dual cm7 device, _CORE_CM7_0_ should be defined and _CORE_CM7_1_ should not be defined */
_base_SRAM                          = _base_SRAM_CM7_0;
_size_SRAM                          = _size_SRAM_CM7_0;
_base_CODE_FLASH                    = _base_CODE_FLASH_CM7_0;
_size_CODE_FLASH                    = _size_CODE_FLASH_CM7_0;
_base_SFLASH_USER_DATA              = 0x17000800;
_size_SFLASH_USER_DATA              = 0x00000800;
_base_SFLASH_NAR                    = 0x17001A00;
_size_SFLASH_NAR                    = 0x00000200;
_base_SFLASH_PUB_KEY                = 0x17006400;
_size_SFLASH_PUB_KEY                = 0x00000C00;
_base_SFLASH_APP_PROT               = 0x17007600;
_size_SFLASH_APP_PROT               = 0x00000200;
_base_SFLASH_TOC2                   = 0x17007C00;
_size_SFLASH_TOC2                   = 0x00000200;
_base_XIP                           = 0x60000000;
_size_XIP                           = 0x08000000;
_base_EFUSE                         = 0x90700000;
_size_EFUSE                         = 0x00100000;
_base_ITCM                          = _base_CM7_0_ITCM;
_size_ITCM                          = _size_CM7_0_ITCM;
_base_DTCM                          = _base_CM7_0_DTCM;
_size_DTCM                          = _size_CM7_0_DTCM;


/* Force symbol to be entered in the output file as an undefined symbol. Doing
* this may, for example, trigger linking of additional modules from standard
* libraries. You may list several symbols for each EXTERN, and you may use
* EXTERN multiple times. This command has the same effect as the -u command-line
* option.
*/
EXTERN(Reset_Handler)

/* The MEMORY section below describes the location and size of blocks of memory in the target.
* Use this section to specify the memory regions available for allocation.
*/
MEMORY
{
    /* The ram and flash regions control RAM and flash memory allocation for the CM7_0/CM7_1 core. */
    ram                 (rxw)       : ORIGIN = _base_SRAM,                  LENGTH = _size_SRAM                 /* SRAM */
    flash_cm0p          (rx)        : ORIGIN = _base_CODE_FLASH_CM0P,       LENGTH = _size_CODE_FLASH_CM0P      /* CODE flash CM0+ */
    flash               (rx)        : ORIGIN = _base_CODE_FLASH,            LENGTH = _size_CODE_FLASH           /* CODE flash CM7_0/1 */

    /* This is a 256K flash region used for EEPROM emulation. This region can also be used as the general purpose flash.
     * You can assign sections to this memory region for only one of the cores.
     */
    em_eeprom           (rw)        : ORIGIN = _base_WORK_FLASH,            LENGTH = _size_WORK_FLASH           /* WORK flash */

    /* The following regions define device specific memory regions and must not be changed. */
    sflash_user_data    (rx)        : ORIGIN = _base_SFLASH_USER_DATA,      LENGTH = _size_SFLASH_USER_DATA     /* Supervisory flash: User data */
    sflash_nar          (rx)        : ORIGIN = _base_SFLASH_NAR,            LENGTH = _size_SFLASH_NAR            /* Supervisory flash: Normal Access Restrictions (NAR) */
    sflash_public_key   (rx)        : ORIGIN = _base_SFLASH_PUB_KEY,        LENGTH = _size_SFLASH_PUB_KEY       /* Supervisory flash: Public Key */
    sflash_app_prot     (rx)        : ORIGIN = _base_SFLASH_APP_PROT,       LENGTH = _size_SFLASH_APP_PROT
    sflash_toc_2        (rx)        : ORIGIN = _base_SFLASH_TOC2,           LENGTH = _size_SFLASH_TOC2          /* Supervisory flash: Table of Content # 2 */
    xip                 (rx)        : ORIGIN = _base_XIP,                   LENGTH = _size_XIP                  /* XIP: 128 MB */
    efuse               (rx)        : ORIGIN = _base_EFUSE,                 LENGTH = _size_EFUSE                /* 1MB */
    itcm                (rx)        : ORIGIN = _base_ITCM,                  LENGTH = _size_ITCM                 /* ITCM */
    dtcm                (rx)        : ORIGIN = _base_DTCM,                  LENGTH = _base_DTCM                 /* DTCM */
}

/* Library configurations */
GROUP(libgcc.a libc.a libm.a libnosys.a)

SECTIONS
{
    /* Cortex-M0+ application flash image area. Comment this section if you don't want to include CM0+ image */
    .cy_cm0p_image  ORIGIN(flash_cm0p):
    {
        . = ALIGN(4);
        __cy_m0p_code_start = . ;
        KEEP(*(.cy_m0p_image))
        __cy_m0p_code_end = . ;
    } > flash_cm0p

    /* Check if .cy_m0p_image size exceeds cm0plus_code_flash_reserve */
    ASSERT(__cy_m0p_code_end < ORIGIN(flash), "CM0+ flash image overflows with CM7, increase CM7 base address ")

    /* Cortex-M7 application flash area */
    .text ORIGIN(flash) :
    {
        /* Cortex-M7 flash vector table */
        . = ALIGN(4);
        __Vectors = . ;
        KEEP(*(.vectors))
        . = ALIGN(4);
        __Vectors_End = .;
        __Vectors_Size = __Vectors_End - __Vectors;
        __end__ = .;

        . = ALIGN(4);
        *(.text*)

        KEEP(*(.init))
        KEEP(*(.fini))

        /* .ctors */
        *crtbegin.o(.ctors)
        *crtbegin?.o(.ctors)
        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
        *(SORT(.ctors.*))
        *(.ctors)

        /* .dtors */
        *crtbegin.o(.dtors)
        *crtbegin?.o(.dtors)
        *(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
        *(SORT(.dtors.*))
        *(.dtors)

        /* Read-only code (constants). */
        *(.rodata .rodata.* .constdata .constdata.* .conststring .conststring.*)

        KEEP(*(.eh_frame*))
    } > flash


    .ARM.extab :
    {
        *(.ARM.extab* .gnu.linkonce.armextab.*)
    } > flash

    __exidx_start = .;

    .ARM.exidx :
    {
        *(.ARM.exidx* .gnu.linkonce.armexidx.*)
    } > flash
    __exidx_end = .;

    .copy.table :
    {
        . = ALIGN(4);
        __copy_table_start__ = .;

        /* Copy data section to RAM */
        LONG (__etext)                                      /* From */
        LONG (__data_start__)                               /* To   */
        LONG ((__data_end__ - __data_start__)/4)            /* Size */

        /* Copy code to ITCM */
        LONG (__zero_table_end__)                           /* From */
        LONG (__itcm_start__)                                     /* To   */
        LONG ((__itcm_end__ - __itcm_start__)/4)  /* Size */

        /* Copy data to DTCM */
        LONG (__itcm_flash_end__)                            /* From */
        LONG (__dtcm_start__)                                      /* To   */
        LONG ((__dtcm_end__ - __dtcm_start__)/4)   /* Size */

        __copy_table_end__ = .;
    } > flash


    .zero.table :
    {
        . = ALIGN(4);
        __zero_table_start__ = .;
        LONG (__bss_start__)
        LONG ((__bss_end__ - __bss_start__)/4)
        __zero_table_end__ = .;
    } > flash

    /* itcm */
    .cy_itcm ORIGIN(itcm):
    {
        __itcm_start__ = .;
        KEEP(*(.cy_itcm))
        __itcm_end__ = .;
    } > itcm AT>flash

    __itcm_flash_end__ = __zero_table_end__ + (__itcm_end__ - __itcm_start__);

    /* dtcm */
    .cy_dtcm ORIGIN(dtcm):
    {
        __dtcm_start__ = .;
        KEEP(*(.cy_dtcm))
        __dtcm_end__ = .;
    } > dtcm AT>flash

    __etext =  __itcm_flash_end__ + (__dtcm_end__ - __dtcm_start__) ;


    .ramVectors (NOLOAD) :
    {
        . = ALIGN(RAMVECTORS_ALIGNMENT);
        __ram_vectors_start__ = .;
        KEEP(*(.ram_vectors))
        __ram_vectors_end__   = .;
    } > ram


    .data __ram_vectors_end__ :
    {
        . = ALIGN(4);
        __data_start__ = .;

        *(vtable)
        *(.data*)

        . = ALIGN(4);
        /* preinit data */
        PROVIDE_HIDDEN (__preinit_array_start = .);
        KEEP(*(.preinit_array))
        PROVIDE_HIDDEN (__preinit_array_end = .);

        . = ALIGN(4);
        /* init data */
        PROVIDE_HIDDEN (__init_array_start = .);
        KEEP(*(SORT(.init_array.*)))
        KEEP(*(.init_array))
        PROVIDE_HIDDEN (__init_array_end = .);

        . = ALIGN(4);
        /* finit data */
        PROVIDE_HIDDEN (__fini_array_start = .);
        KEEP(*(SORT(.fini_array.*)))
        KEEP(*(.fini_array))
        PROVIDE_HIDDEN (__fini_array_end = .);

        KEEP(*(.jcr*))
        . = ALIGN(4);

        KEEP(*(.cy_ramfunc*))
        . = ALIGN(32);

        KEEP(*(cy_sharedmem*))
        . = ALIGN(4);

        __data_end__ = .;

    } > ram AT>flash


    /* Place variables in the section that should not be initialized during the
    *  device startup.
    */
    .noinit (NOLOAD) : ALIGN(8)
    {
      KEEP(*(.noinit))
    } > ram


    /* The uninitialized global or static variables are placed in this section.
    *
    * The NOLOAD attribute tells linker that .bss section does not consume
    * any space in the image. The NOLOAD attribute changes the .bss type to
    * NOBITS, and that  makes linker to A) not allocate section in memory, and
    * A) put information to clear the section with all zeros during application
    * loading.
    *
    * Without the NOLOAD attribute, the .bss section might get PROGBITS type.
    * This  makes linker to A) allocate zeroed section in memory, and B) copy
    * this section to RAM during application loading.
    */
    .bss (NOLOAD):
    {
        . = ALIGN(4);
        __bss_start__ = .;
        *(.bss*)
        *(COMMON)
        . = ALIGN(4);
        __bss_end__ = .;
    } > ram


    .heap (NOLOAD):
    {
        __HeapBase = .;
        __end__ = .;
        end = __end__;
        KEEP(*(.heap*))
        . = ORIGIN(ram) + LENGTH(ram) - STACK_SIZE;
        __HeapLimit = .;
    } > ram


    /* .stack_dummy section doesn't contains any symbols. It is only
     * used for linker to calculate size of stack sections, and assign
     * values to stack symbols later */
    .stack_dummy (NOLOAD):
    {
        KEEP(*(.stack*))
    } > ram


    /* Set stack top to end of RAM, and stack limit move down by
     * size of stack_dummy section */
    __StackTop = ORIGIN(ram) + LENGTH(ram);
    __StackLimit = __StackTop - STACK_SIZE;
    PROVIDE(__stack = __StackTop);

    /* Check if data + heap + stack exceeds RAM limit */
    ASSERT(__StackLimit >= __HeapLimit, "region RAM overflowed with stack")


    /* Emulated EEPROM Flash area */
    .cy_em_eeprom :
    {
        KEEP(*(.cy_em_eeprom))
    } > em_eeprom


    /* Supervisory Flash: User data */
    .cy_sflash_user_data :
    {
        KEEP(*(.cy_sflash_user_data))
    } > sflash_user_data


    /* Supervisory Flash: Normal Access Restrictions (NAR) */
    .cy_sflash_nar :
    {
        KEEP(*(.cy_sflash_nar))
    } > sflash_nar


    /* Supervisory Flash: Public Key */
    .cy_sflash_public_key :
    {
        KEEP(*(.cy_sflash_public_key))
    } > sflash_public_key


    /* Supervisory Flash: Table of Content # 2 */
    .cy_toc_part2 :
    {
        KEEP(*(.cy_toc_part2))
    } > sflash_toc_2

    /* Places the code in the Execute in Place (XIP) section. See the smif driver
    *  documentation for details.
    */
    cy_xip :
    {
        __cy_xip_start = .;
        KEEP(*(.cy_xip))
        __cy_xip_end = .;
    } > xip


    /* eFuse */
    .cy_efuse :
    {
        KEEP(*(.cy_efuse))
    } > efuse

}


/*============================================================
 * Symbols for use by application
 *============================================================
 */

__ecc_init_sram_start_address = ORIGIN(ram);
__ecc_init_sram_end_address   = ORIGIN(ram) + LENGTH(ram);

/* EOF */