rt-thread/bsp/renesas/ra6e2-fpb/script/fsp.scat

#! armclang -mcpu=cortex-m4 --target=arm-arm-none-eabi -E -x c -I.
#include "memory_regions.scat"

; This scatter-file places the vector table, application code, data, stacks and heap at suitable addresses in the memory map.

#define ROM_REGISTERS_START 0x400
; Uncomment and set XIP_SECONDARY_SLOT_IMAGE to 1 below for the secondary XIP application image.
; #define XIP_SECONDARY_SLOT_IMAGE 1

#ifdef FLASH_BOOTLOADER_LENGTH

#define BL_FLASH_IMAGE_START        (FLASH_APPLICATION_IMAGE_NUMBER == 1 ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : \
                                    (defined(BOOTLOADER_SECONDARY_USE_QSPI)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : \
                                    (defined(BOOTLOADER_SECONDARY_USE_OSPI_B)) ? FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH : \
                                    FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_BOOTLOADER_SCRATCH_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH)
#define BL_FLASH_IMAGE_END          (BL_FLASH_IMAGE_START + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH)
#define BL_XIP_SECONDARY_FLASH_IMAGE_START    (FLASH_START + FLASH_BOOTLOADER_LENGTH + FLASH_APPLICATION_S_LENGTH + FLASH_BOOTLOADER_HEADER_LENGTH)
#define BL_XIP_SECONDARY_FLASH_IMAGE_END      (BL_XIP_SECONDARY_FLASH_IMAGE_START + FLASH_APPLICATION_S_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH)
#define BL_FLASH_NS_START           (FLASH_APPLICATION_NS_LENGTH == 0 ? BL_FLASH_IMAGE_END : \
                                    BL_FLASH_IMAGE_START - FLASH_BOOTLOADER_HEADER_LENGTH + FLASH_APPLICATION_S_LENGTH)
#define BL_FLASH_NSC_START          (FLASH_APPLICATION_NS_LENGTH == 0 ? BL_FLASH_IMAGE_END : \
                                    BL_FLASH_NS_START - FLASH_APPLICATION_NSC_LENGTH)
#define BL_FLASH_NS_IMAGE_START     (FLASH_APPLICATION_NS_LENGTH == 0 ? BL_FLASH_IMAGE_END : \
                                    BL_FLASH_NS_START + FLASH_BOOTLOADER_HEADER_LENGTH_2)
#define BL_RAM_NS_START             (FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : \
                                    RAM_START + RAM_LENGTH - RAM_APPLICATION_NS_LENGTH)
#define BL_RAM_NSC_START            (FLASH_APPLICATION_NS_LENGTH == 0 ? RAM_START + RAM_LENGTH : \
                                    BL_RAM_NS_START - RAM_APPLICATION_NSC_LENGTH)
#define BLN_FLASH_IMAGE_START       (BL_FLASH_NS_IMAGE_START)
#define BLN_FLASH_IMAGE_END         (FLASH_APPLICATION_NS_LENGTH == 0 ? BL_FLASH_IMAGE_END : \
                                    BL_FLASH_NS_IMAGE_START + FLASH_APPLICATION_NS_LENGTH - FLASH_BOOTLOADER_HEADER_LENGTH_2)

#define FLASH_ORIGIN                FLASH_START
#define LIMITED_FLASH_LENGTH        FLASH_BOOTLOADER_LENGTH

#elif defined FLASH_IMAGE_START

#if defined XIP_SECONDARY_SLOT_IMAGE
#define FLASH_ORIGIN                (XIP_SECONDARY_SLOT_IMAGE == 1 ? XIP_SECONDARY_FLASH_IMAGE_START : FLASH_IMAGE_START)
#else
#define FLASH_ORIGIN                FLASH_IMAGE_START
#endif


#ifdef FLASH_NS_START
#define LIMITED_FLASH_LENGTH        FLASH_NS_START - FLASH_IMAGE_START
#else
#define LIMITED_FLASH_LENGTH        FLASH_IMAGE_END - FLASH_IMAGE_START
#endif

#else

#define FLASH_ORIGIN                FLASH_START
#define LIMITED_FLASH_LENGTH        FLASH_LENGTH

#endif

; If a flat project has defined RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM.
#if !defined(PROJECT_NONSECURE) && defined(RAM_NS_BUFFER_LENGTH) && (OPTION_SETTING_S_LENGTH != 0)
#define __RESERVE_NS_RAM (1)
; Allocate required RAM and align to 32K boundary
#define RAM_NS_BUFFER_START     ((RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH) AND 0xFFFFFFE0)
#else
#define __RESERVE_NS_RAM (0)
#endif

#ifndef FLASH_S_START
#define FLASH_S_START      0
#endif

#ifndef RAM_S_START
#define RAM_S_START        RAM_START
#endif

#ifndef DATA_FLASH_S_START
#define DATA_FLASH_S_START DATA_FLASH_START
#endif

#if __RESERVE_NS_RAM

#ifndef RAM_NSC_START
#define RAM_NSC_START       RAM_NS_BUFFER_START AND 0xFFFFE000
#endif

#ifndef RAM_NS_START
#define RAM_NS_START        RAM_NS_BUFFER_START AND 0xFFFFE000
#endif

#ifndef DATA_FLASH_NS_START
#define DATA_FLASH_NS_START DATA_FLASH_START + DATA_FLASH_LENGTH
#endif

#ifndef FLASH_NSC_START
#define FLASH_NSC_START     FLASH_ORIGIN + LIMITED_FLASH_LENGTH
#endif

#ifndef FLASH_NS_START
#define FLASH_NS_START      FLASH_ORIGIN + LIMITED_FLASH_LENGTH
#endif

#else

#ifndef RAM_NSC_START
#ifdef PROJECT_SECURE
#define RAM_NSC_START       +0 ALIGN 1024
#else
#define RAM_NSC_START       RAM_START + RAM_LENGTH
#endif
#endif

#ifndef RAM_NS_START
#ifdef PROJECT_SECURE
#define RAM_NS_START        +0 ALIGN 8192
#else
#define RAM_NS_START        RAM_START + RAM_LENGTH
#endif
#endif

#ifndef DATA_FLASH_NS_START
#define DATA_FLASH_NS_START +0 ALIGN 1024
#endif

#ifndef FLASH_NSC_START
#define FLASH_NSC_START     (AlignExpr(ImageLength(LOAD_REGION_FLASH) + ImageBase(LOAD_REGION_FLASH), 1024))
#endif

#ifndef FLASH_NS_START
#define FLASH_NS_START       AlignExpr(+0, 32768)
#endif

#endif

#ifndef QSPI_FLASH_S_START
#define QSPI_FLASH_S_START QSPI_FLASH_START
#endif

#ifndef QSPI_FLASH_NS_START
#define QSPI_FLASH_NS_START +0
#endif

#ifndef OSPI_DEVICE_0_S_START
#define OSPI_DEVICE_0_S_START OSPI_DEVICE_0_START
#endif

#ifndef OSPI_DEVICE_0_NS_START
#define OSPI_DEVICE_0_NS_START +0
#endif

#ifndef OSPI_DEVICE_1_S_START
#define OSPI_DEVICE_1_S_START OSPI_DEVICE_1_START
#endif

#ifndef OSPI_DEVICE_1_NS_START
#define OSPI_DEVICE_1_NS_START +0
#endif

#ifndef SDRAM_S_START
#define SDRAM_S_START SDRAM_START
#endif

#ifndef SDRAM_NS_START
#define SDRAM_NS_START +0
#endif

#ifdef QSPI_FLASH_SIZE
#define QSPI_FLASH_PRV_LENGTH QSPI_FLASH_SIZE
#else
#define QSPI_FLASH_PRV_LENGTH QSPI_FLASH_LENGTH
#endif

#ifdef OSPI_DEVICE_0_SIZE
#define OSPI_DEVICE_0_PRV_LENGTH OSPI_DEVICE_0_SIZE
#else
#define OSPI_DEVICE_0_PRV_LENGTH OSPI_DEVICE_0_LENGTH
#endif

#ifdef OSPI_DEVICE_1_SIZE
#define OSPI_DEVICE_1_PRV_LENGTH OSPI_DEVICE_1_SIZE
#else
#define OSPI_DEVICE_1_PRV_LENGTH OSPI_DEVICE_1_LENGTH
#endif

#ifdef PROJECT_NONSECURE
#define OPTION_SETTING_START_NS (OPTION_SETTING_START)
#else
#define OPTION_SETTING_START_NS (OPTION_SETTING_START + 0x80)
#endif

#define ID_CODE_OVERLAP   ((ID_CODE_START > OPTION_SETTING_START) && (ID_CODE_START < OPTION_SETTING_START + OPTION_SETTING_LENGTH))

LOAD_REGION_FLASH FLASH_ORIGIN ALIGN 0x80 LIMITED_FLASH_LENGTH
{
  __tz_FLASH_S +0 EMPTY 0
  {
  }

  VECTORS +0 FIXED PADVALUE 0xFFFFFFFF   ; maximum of 256 exceptions (256*4 bytes == 0x400)
  {
    *(.fixed_vectors, +FIRST)
    *(.application_vectors)
  }

  ; MCUs with the OPTION_SETTING region do not use the ROM registers at 0x400.
#if (OPTION_SETTING_LENGTH == 0) && (FLASH_ORIGIN == FLASH_START)

  ; Some devices have a gap of code flash between the vector table and ROM Registers.
  ; The flash gap section allows applications to place code and data in this section.
  ROMGAP +0 FIXED
  {
    *(.flash_gap)
  }

  ROMGAP_FILL +0 FIXED FILL 0xFFFFFFFF (0x400 - ImageLength(VECTORS) - ImageLength(ROMGAP))
  {
  }

  ROM_REGISTERS FLASH_START+0x400 FIXED PADVALUE 0xFFFFFFFF
  {
    bsp_rom_registers.o (.rom_registers)
  }

#endif

  MCUBOOT_SCE9_KEY +0 FIXED
  {
    *(.mcuboot_sce9_key)
  }


  INIT_ARRAY +0 FIXED
  {
    *(.init_array)
  }

  USB_DESC_FS +0 FIXED
  {
    *(.usb_device_desc_fs*)
    *(.usb_config_desc_fs*)
    *(.usb_interface_desc_fs*)
  }

  RO_CODE_DATA +0 FIXED
  {
    *(.text*,.rodata*,.constdata*)
    .ANY(+RO)
  }

  __tz_RAM_S RAM_S_START EMPTY 0
  {
  }

  DTC_VECTOR_TABLE RAM_START UNINIT NOCOMPRESS RAM_LENGTH
  {
    ; If DTC is used, put the DTC vector table at the start of SRAM.
    ; This avoids memory holes due to 1K alignment required by it.
    *(.bss.fsp_dtc_vector_table)
  }

  DATA +0 NOCOMPRESS
  {
    ; Do not use *(.data*) because it will place data meant for .data_flash in this section.
    *(.data.*)
    *(.data)
    *(.code_in_ram)

#if !__RESERVE_NS_RAM
    *(.ns_buffer*)
#endif

    .ANY(+RW)
  }

  BSS +0 NOCOMPRESS
  {
    *(+ZI)
  }

  NOINIT +0 UNINIT NOCOMPRESS
  {
    *(.bss.noinit)
  }

  ARM_LIB_HEAP +0 ALIGN 8 UNINIT NOCOMPRESS
  {
    *(.bss.heap)
  }

  ; ARM_LIB_STACK is not used in FSP, but it must be in the scatter file to avoid a linker error
  ARM_LIB_STACK +0 ALIGN 8 UNINIT NOCOMPRESS EMPTY 0
  {
  }

  STACK +0 ALIGN 8 UNINIT NOCOMPRESS
  {
    *(.bss.stack)
    *(.bss.stack.thread)
  }

  /* This is the end of RAM used in the application. */
  RAM_END +0 EMPTY 4
  {
  }
  __tz_RAM_C RAM_NSC_START EMPTY 0
  {
  }

  __tz_RAM_N RAM_NS_START EMPTY 0
  {
  }

  ; Support for OctaRAM
  OSPI_DEVICE_0_NO_LOAD OSPI_DEVICE_0_START UNINIT NOCOMPRESS
  {
    *(.ospi_device_0_no_load*)
  }

  ; Support for OctaRAM
  OSPI_DEVICE_1_NO_LOAD OSPI_DEVICE_1_START UNINIT NOCOMPRESS
  {
    *(.ospi_device_1_no_load*)
  }

#ifdef FLASH_BOOTLOADER_LENGTH

  __bl_FLASH_IMAGE_START BL_FLASH_IMAGE_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_flash_image_start)
  }

  __bl_XIP_SECONDARY_FLASH_IMAGE_START BL_XIP_SECONDARY_FLASH_IMAGE_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_xip_secondary_flash_image_start)
  }


#if FLASH_APPLICATION_NS_LENGTH == 0

  __bl_FLASH_IMAGE_END BL_FLASH_IMAGE_END OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_flash_image_end)
  }

  __bl_XIP_SECONDARY_FLASH_IMAGE_END BL_XIP_SECONDARY_FLASH_IMAGE_END OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_xip_secondary_flash_image_end)
  }

#else

  __bl_FLASH_NS_START BL_FLASH_NS_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_flash_ns_start)
  }

  __bl_FLASH_NSC_START BL_FLASH_NSC_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_flash_nsc_start)
  }

  __bl_FLASH_NS_IMAGE_START BL_FLASH_NS_IMAGE_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_flash_ns_image_start)
  }

  __bln_FLASH_IMAGE_START BLN_FLASH_IMAGE_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bln_flash_image_start)
  }

  __bln_FLASH_IMAGE_END BLN_FLASH_IMAGE_END OVERLAY UNINIT 4
  {
    *(.bl_boundary.bln_flash_image_end)
  }

  __bl_RAM_NS_START BL_RAM_NS_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_ram_ns_start)
  }

  __bl_RAM_NSC_START BL_RAM_NSC_START OVERLAY UNINIT 4
  {
    *(.bl_boundary.bl_ram_nsc_start)
  }

#endif

#endif

#if __RESERVE_NS_RAM
  RAM_NS_BUFFER RAM_NS_BUFFER_START
  {
    *(.ns_buffer*)
  }
#endif

  RAM_LIMIT RAM_START + RAM_LENGTH EMPTY 4
  {
  }

#if ITCM_LENGTH > 0
  ; ALIGN will align both the load address and execution address.
  ; The required minimum execution address alignment is an 8 byte boundary for ECC compatibility.
  ; Aligning instead to a 16 byte boundary meets the above requirement and also aligns the load address to FCACHE2 for RA8 to optimize copying.
  __tz_ITCM_S ITCM_START ALIGN 16 EMPTY 0
  {
  }

  ITCM_DATA +0 NOCOMPRESS ITCM_LENGTH
  {
    *(.itcm_data*)
  }

  ; The required minimum ending alignment is an 8 byte boundary for ECC compatibility.
  ; There is no way to control the ending alignment of ITCM_DATA, so this dedicated section acts as padding and as the true load and execution section limit of ITCM_DATA.
  ; "Load Addr" will show "-" in the map file making it seem as if no padding is actually in the binary, but "Load base:" will show otherwise.
  ITCM_PAD (ImageLimit(ITCM_DATA)) FILL 0 NOCOMPRESS (AlignExpr(ImageLength(ITCM_DATA), 8) - ImageLength(ITCM_DATA))
  {
  }

#ifndef ITCM_NS_START
#define ITCM_NS_START AlignExpr(+0, 8192)
#endif
  __tz_ITCM_N ITCM_NS_START ALIGN 8 EMPTY 0
  {
  }

  ScatterAssert((ITCM_START AND 0xF) == 0)
  ScatterAssert((ITCM_LENGTH AND 0x7) == 0)
  ScatterAssert(((LoadLength(ITCM_DATA) + LoadLength(ITCM_PAD)) AND 0x7) == 0)
  ScatterAssert(LoadLimit(ITCM_DATA) == LoadBase(ITCM_PAD))
  ScatterAssert(ImageLimit(ITCM_DATA) == ImageBase(ITCM_PAD))

#endif



#if DTCM_LENGTH > 0
  ; ALIGN will align both the load address and execution address.
  ; The required minimum execution address alignment is an 8 byte boundary for ECC compatibility.
  ; Aligning instead to a 16 byte boundary meets the above requirement and also aligns the load address to FCACHE2 for RA8 to optimize copying.
  __tz_DTCM_S DTCM_START ALIGN 16 EMPTY 0
  {
  }

  DTCM_DATA +0 NOCOMPRESS DTCM_LENGTH
  {
    *(.dtcm_data*)
  }

  ; The required minimum ending alignment is an 8 byte boundary for ECC compatibility.
  ; There is no way to control the ending alignment of DTCM_DATA, so this dedicated section acts as padding and as the true load and execution section limit of DTCM_DATA.
  ; "Load Addr" will show "-" in the map file making it seem as if no padding is actually in the binary, but "Load base:" will show otherwise.
  DTCM_PAD (ImageLimit(DTCM_DATA)) FILL 0 NOCOMPRESS (AlignExpr(ImageLength(DTCM_DATA), 8) - ImageLength(DTCM_DATA))
  {
  }

  DTCM_BSS (ImageLimit(DTCM_PAD)) UNINIT NOCOMPRESS (DTCM_LENGTH - ImageLength(DTCM_DATA) - ImageLength(DTCM_PAD))
  {
    ; .bss prefix is required for AC6 to not create a load image data for this section.
    ; Only .bss prefixed sections can be ZI.
    ; Only ZI sections with UNINIT can be uninitialized.
    *(.bss.dtcm_bss)
  }

  ; The required minimum ending alignment is an 8 byte boundary for ECC compatibility.
  ; There is no way to control the ending alignment of DTCM_BSS, so this dedicated section acts as padding and as the true execution section limit of DTCM_BSS.
  DTCM_BSS_PAD (ImageLimit(DTCM_BSS)) EMPTY NOCOMPRESS (AlignExpr(ImageLength(DTCM_BSS), 8) - ImageLength(DTCM_BSS))
  {
  }

#ifndef DTCM_NS_START
#define DTCM_NS_START AlignExpr(+0, 8192)
#endif
  __tz_DTCM_N DTCM_NS_START ALIGN 8 EMPTY 0
  {
  }

  ScatterAssert((DTCM_START AND 0xF) == 0)
  ScatterAssert((DTCM_LENGTH AND 0x7) == 0)
  ScatterAssert(((LoadLength(DTCM_DATA) + LoadLength(DTCM_PAD)) AND 0x7) == 0)
  ScatterAssert(((ImageLength(DTCM_BSS) + ImageLength(DTCM_BSS_PAD)) AND 0x7) == 0)
  ScatterAssert(LoadLimit(DTCM_DATA) == LoadBase(DTCM_PAD))
  ScatterAssert(LoadLimit(DTCM_PAD) == LoadBase(DTCM_BSS))
  ScatterAssert(LoadLimit(DTCM_BSS) == LoadBase(DTCM_BSS_PAD))
  ScatterAssert(ImageLimit(DTCM_DATA) == ImageBase(DTCM_PAD))
  ScatterAssert(ImageLimit(DTCM_PAD) == ImageBase(DTCM_BSS))
  ScatterAssert(ImageLimit(DTCM_BSS) == ImageBase(DTCM_BSS_PAD))

#endif
}

LOAD_REGION_NSC_FLASH FLASH_NSC_START
{
  __tz_FLASH_C FLASH_NSC_START EMPTY 0
  {
  }

  EXEC_NSCR FLASH_NSC_START FIXED
  {
    *(Veneer$$CMSE)
  }

  __tz_FLASH_N FLASH_NS_START EMPTY 0
  {
  }
}

#if ID_CODE_OVERLAP == 0

#if ID_CODE_LENGTH != 0
LOAD_REGION_ID_CODE ID_CODE_START ID_CODE_LENGTH
{
  __tz_ID_CODE_S ID_CODE_START EMPTY 0
  {
  }

  ; Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE
  ; memory region between TrustZone projects.
  __tz_ID_CODE_N +0 EMPTY 0
  {
  }

  ID_CODE +0 FIXED
  {
    *(.id_code*)
  }
}
#else
LOAD_REGION_ID_CODE ID_CODE_START 4
{
  __tz_ID_CODE_S ID_CODE_START EMPTY 0
  {
  }

  __tz_ID_CODE_N +0 EMPTY 0
  {
  }
}
#endif

#endif

#if OPTION_SETTING_LENGTH != 0
LOAD_REGION_OPTION_SETTING OPTION_SETTING_START OPTION_SETTING_LENGTH
{
  __tz_OPTION_SETTING_S OPTION_SETTING_START EMPTY 0
  {
  }

#ifndef PROJECT_NONSECURE
  OFS0 OPTION_SETTING_START + 0 FIXED
  {
    *(.option_setting_ofs0)
  }

  UNUSED_0 (ImageBase(OFS0)+ImageLength(OFS0)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS0) + 0x04 - (ImageBase(OFS0)+ImageLength(OFS0)))
  {

  }

  OFS2 OPTION_SETTING_START + 0x04 FIXED
  {
    *(.option_setting_ofs2)
  }

  UNUSED_1 (ImageBase(OFS2)+ImageLength(OFS2)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS0) + 0x10 - (ImageBase(OFS2)+ImageLength(OFS2)))
  {

  }

  DUALSEL OPTION_SETTING_START + 0x10 FIXED
  {
    *(.option_setting_dualsel)
  }

#if ID_CODE_OVERLAP == 0

  UNUSED_2 (ImageBase(DUALSEL)+ImageLength(DUALSEL)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS0) + 0x34 - (ImageBase(DUALSEL)+ImageLength(DUALSEL)))
  {

  }

#else

  UNUSED_BEFORE_ID_CODE (ImageBase(DUALSEL)+ImageLength(DUALSEL)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS0) + 0x20 - (ImageBase(DUALSEL)+ImageLength(DUALSEL)))
  {

  }

  __tz_ID_CODE_S ID_CODE_START EMPTY 0
  {
  }

  ; Set this symbol to the same value as __tz_ID_CODE_S so the RA configuration tool does not split the ID_CODE
  ; memory region between TrustZone projects.
  __tz_ID_CODE_N +0 EMPTY 0
  {
  }

  ID_CODE ID_CODE_START FIXED
  {
    *(.id_code*)
  }

  UNUSED_AFTER_ID_CODE (ID_CODE_START + ID_CODE_LENGTH) FIXED FILL 0xFFFFFFFF (ImageBase(OFS0) + 0x34 - (ID_CODE_START + ID_CODE_LENGTH) )
  {

  }

#endif

  SAS OPTION_SETTING_START + 0x34 FIXED
  {
    *(.option_setting_sas)
  }

  UNUSED_3 (ImageBase(SAS)+ImageLength(SAS)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS0) + 0x80 - (ImageBase(SAS)+ImageLength(SAS)))
  {

  }

  __tz_OPTION_SETTING_N OPTION_SETTING_START_NS EMPTY 0
  {
  }

#else

  __tz_OPTION_SETTING_N OPTION_SETTING_START EMPTY 0
  {
  }

  OFS1 OPTION_SETTING_START FIXED
  {
    *(.option_setting_ofs1)
  }

  UNUSED_4 (ImageBase(OFS1)+ImageLength(OFS1)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1) + 0x04 - (ImageBase(OFS1)+ImageLength(OFS1)))
  {

  }

  OFS3 OPTION_SETTING_START + 0x04 FIXED
  {
    *(.option_setting_ofs3)
  }

  UNUSED_5 (ImageBase(OFS3)+ImageLength(OFS3)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1) + 0x10 - (ImageBase(OFS3)+ImageLength(OFS3)))
  {

  }

  BANKSEL OPTION_SETTING_START + 0x10 FIXED
  {
    *(.option_setting_banksel)
  }

  UNUSED_6 (ImageBase(BANKSEL)+ImageLength(BANKSEL)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1) + 0x40 - (ImageBase(BANKSEL)+ImageLength(BANKSEL)))
  {

  }

  BPS OPTION_SETTING_START + 0x40 FIXED
  {
    *(.option_setting_bps0)
    *(.option_setting_bps1)
    *(.option_setting_bps2)
    *(.option_setting_bps3)
  }

  UNUSED_7 (ImageBase(BPS)+ImageLength(BPS)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1) + 0x60 - (ImageBase(BPS)+ImageLength(BPS)))
  {

  }

  PBPS OPTION_SETTING_START + 0x60 FIXED
  {
    *(.option_setting_pbps0)
    *(.option_setting_pbps1)
    *(.option_setting_pbps2)
    *(.option_setting_pbps3)
  }

  UNUSED_8 (ImageBase(PBPS)+ImageLength(PBPS)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1) + 0x80 - (ImageBase(PBPS)+ImageLength(PBPS)))
  {

  }
#endif

}

#if OPTION_SETTING_S_LENGTH != 0
LOAD_REGION_OPTION_SETTING_S OPTION_SETTING_S_START OPTION_SETTING_S_LENGTH
{
  __tz_OPTION_SETTING_S_S OPTION_SETTING_S_START EMPTY 0
  {
  }

#ifndef PROJECT_NONSECURE

  OFS1_SEC OPTION_SETTING_S_START + 0 FIXED
  {
    *(.option_setting_ofs1_sec)
  }

  UNUSED_7 (ImageBase(OFS1_SEC)+ImageLength(OFS1_SEC)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x04 - (ImageBase(OFS1_SEC)+ImageLength(OFS1_SEC)))
  {

  }

  OFS3_SEC OPTION_SETTING_S_START + 0x04 FIXED
  {
    *(.option_setting_ofs3_sec)
  }

  UNUSED_8 (ImageBase(OFS3_SEC)+ImageLength(OFS3_SEC)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x10 - (ImageBase(OFS3_SEC)+ImageLength(OFS3_SEC)))
  {

  }

  BANKSEL_SEC OPTION_SETTING_S_START + 0x10 FIXED
  {
    *(.option_setting_banksel_sec)
  }

  UNUSED_9 (ImageBase(BANKSEL_SEC)+ImageLength(BANKSEL_SEC)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x40 - (ImageBase(BANKSEL_SEC)+ImageLength(BANKSEL_SEC)))
  {

  }

  BPS_SEC OPTION_SETTING_S_START + 0x40 FIXED
  {
    *(.option_setting_bps_sec0)
    *(.option_setting_bps_sec1)
    *(.option_setting_bps_sec2)
    *(.option_setting_bps_sec3)
  }

  UNUSED_10 (ImageBase(BPS_SEC)+ImageLength(BPS_SEC)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x60 - (ImageBase(BPS_SEC)+ImageLength(BPS_SEC)))
  {

  }

  PBPS_SEC OPTION_SETTING_S_START + 0x60 FIXED
  {
    *(.option_setting_pbps_sec0)
    *(.option_setting_pbps_sec1)
    *(.option_setting_pbps_sec2)
    *(.option_setting_pbps_sec3)
  }

  UNUSED_11 (ImageBase(PBPS_SEC)+ImageLength(PBPS_SEC)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x80 - (ImageBase(PBPS_SEC)+ImageLength(PBPS_SEC)))
  {

  }

  OFS1_SEL OPTION_SETTING_S_START + 0x80 FIXED
  {
    *(.option_setting_ofs1_sel)
  }

  UNUSED_12 (ImageBase(OFS1_SEL)+ImageLength(OFS1_SEL)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x84 - (ImageBase(OFS1_SEL)+ImageLength(OFS1_SEL)))
  {

  }

  OFS3_SEL OPTION_SETTING_S_START + 0x84 FIXED
  {
    *(.option_setting_ofs3_sel)
  }

  UNUSED_13 (ImageBase(OFS3_SEL)+ImageLength(OFS3_SEL)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x90 - (ImageBase(OFS3_SEL)+ImageLength(OFS3_SEL)))
  {

  }

  BANKSEL_SEL OPTION_SETTING_S_START + 0x90 FIXED
  {
    *(.option_setting_banksel_sel)
  }

  UNUSED_14 (ImageBase(BANKSEL_SEL)+ImageLength(BANKSEL_SEL)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0xC0 - (ImageBase(BANKSEL_SEL)+ImageLength(BANKSEL_SEL)))
  {

  }

  BPS_SEL OPTION_SETTING_S_START + 0xC0 FIXED
  {
    *(.option_setting_bps_sel0)
    *(.option_setting_bps_sel1)
    *(.option_setting_bps_sel2)
    *(.option_setting_bps_sel3)
  }

  UNUSED_15 (ImageBase(BPS_SEL)+ImageLength(BPS_SEL)) FIXED FILL 0xFFFFFFFF (ImageBase(OFS1_SEC) + 0x100 - (ImageBase(BPS_SEL)+ImageLength(BPS_SEL)))
  {

  }

#endif

  __tz_OPTION_SETTING_S_N +0 EMPTY 0
  {
  }
}
#endif
#endif

LOAD_REGION_DATA_FLASH DATA_FLASH_START DATA_FLASH_LENGTH
{
  __tz_DATA_FLASH_S DATA_FLASH_S_START EMPTY 0
  {
  }
  DATA_FLASH +0
  {
    *(.data_flash*)
  }
  __tz_DATA_FLASH_N DATA_FLASH_NS_START EMPTY 0
  {
  }
}

LOAD_REGION_QSPI_FLASH QSPI_FLASH_START QSPI_FLASH_PRV_LENGTH
{
  __tz_QSPI_FLASH_S QSPI_FLASH_S_START EMPTY 0
  {
  }
  QSPI_FLASH +0 FIXED
  {
    *(.qspi_flash*)
    *(.code_in_qspi*)
  }
  __tz_QSPI_FLASH_N QSPI_FLASH_NS_START EMPTY 0
  {
  }
}

LOAD_REGION_OSPI_DEVICE_0 OSPI_DEVICE_0_START OSPI_DEVICE_0_PRV_LENGTH
{
  __tz_OSPI_DEVICE_0_S OSPI_DEVICE_0_S_START EMPTY 0
  {
  }
  OSPI_DEVICE_0 +0 FIXED
  {
    *(.ospi_device_0*)
    *(.code_in_ospi_device_0*)
  }
  __tz_OSPI_DEVICE_0_N OSPI_DEVICE_0_NS_START EMPTY 0
  {
  }
}

LOAD_REGION_OSPI_DEVICE_1 OSPI_DEVICE_1_START OSPI_DEVICE_1_PRV_LENGTH
{
  __tz_OSPI_DEVICE_1_S OSPI_DEVICE_1_S_START EMPTY 0
  {
  }
  OSPI_DEVICE_1 +0 FIXED
  {
    *(.ospi_device_1*)
    *(.code_in_ospi_device_1*)
  }
  __tz_OSPI_DEVICE_1_N OSPI_DEVICE_1_NS_START EMPTY 0
  {
  }
}

LOAD_REGION_SDRAM SDRAM_START SDRAM_LENGTH
{
  __tz_SDRAM_S SDRAM_S_START EMPTY 0
  {
  }

  SDRAM +0 FIXED
  {
    *(.sdram*)
    *(.frame*)
  }

  __tz_SDRAM_N SDRAM_NS_START EMPTY 0
  {
  }
}