rt-thread/bsp/imx6ul/platform/include/mx6ul/registers/regsuart.h

/*
 * Copyright (c) 2012, Freescale Semiconductor, Inc.
 * All rights reserved.
 *
 * THIS SOFTWARE IS PROVIDED BY FREESCALE "AS IS" AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
 * SHALL FREESCALE BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
 * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
 * OF SUCH DAMAGE.
 */
/*
 * WARNING! DO NOT EDIT THIS FILE DIRECTLY!
 *
 * This file was generated automatically and any changes may be lost.
 */
#ifndef __HW_UART_REGISTERS_H__
#define __HW_UART_REGISTERS_H__

#include "regs.h"

/*
 * i.MX6UL UART
 *
 * UARTv2
 *
 * Registers defined in this header file:
 * - HW_UART_URXD - UART Receiver Register
 * - HW_UART_UTXD - UART Transmitter Register
 * - HW_UART_UCR1 - UART Control Register 1
 * - HW_UART_UCR2 - UART Control Register 2
 * - HW_UART_UCR3 - UART Control Register 3
 * - HW_UART_UCR4 - UART Control Register 4
 * - HW_UART_UFCR - UART FIFO Control Register
 * - HW_UART_USR1 - UART Status Register 1
 * - HW_UART_USR2 - UART Status Register 2
 * - HW_UART_UESC - UART Escape Character Register
 * - HW_UART_UTIM - UART Escape Timer Register
 * - HW_UART_UBIR - UART BRM Incremental Register
 * - HW_UART_UBMR - UART BRM Modulator Register
 * - HW_UART_UBRC - UART Baud Rate Count Register
 * - HW_UART_ONEMS - UART One Millisecond Register
 * - HW_UART_UTS - UART Test Register
 * - HW_UART_UMCR - UART RS-485 Mode Control Register
 *
 * - hw_uart_t - Struct containing all module registers.
 */

//! @name Module base addresses
//@{
#ifndef REGS_UART_BASE
#define HW_UART_INSTANCE_COUNT (8) //!< Number of instances of the UART module.
#define HW_UART1 (1) //!< Instance number for UART1.
#define HW_UART2 (2) //!< Instance number for UART2.
#define HW_UART3 (3) //!< Instance number for UART3.
#define HW_UART4 (4) //!< Instance number for UART4.
#define HW_UART5 (5) /*!< Instance number for UART5. */
#define HW_UART6 (6) /*!< Instance number for UART6. */
#define HW_UART7 (7) /*!< Instance number for UART7. */
#define HW_UART8 (8) /*!< Instance number for UART8. */

#define REGS_UART1_BASE (0x02020000) //!< Base address for UART instance number 1.
#define REGS_UART2_BASE (0x021e8000) //!< Base address for UART instance number 2.
#define REGS_UART3_BASE (0x021ec000) //!< Base address for UART instance number 3.
#define REGS_UART4_BASE (0x021f0000) //!< Base address for UART instance number 4.
#define REGS_UART5_BASE (0x021f4000) //!< Base address for UART instance number 5.
#define REGS_UART6_BASE (0x21FC000U) //!< Base address for UART instance number 6.
#define REGS_UART7_BASE (0x2018000U) //!< Base address for UART instance number 7.
#define REGS_UART8_BASE (0x2024000U) //!< Base address for UART instance number 8.

//! @brief Get the base address of UART by instance number.
//! @param x UART instance number, from 1 through 5.
#define REGS_UART_BASE(x) ( (x) == HW_UART1 ? REGS_UART1_BASE : (x) == HW_UART2 ? REGS_UART2_BASE : (x) == HW_UART3 ? REGS_UART3_BASE : (x) == HW_UART4 ? REGS_UART4_BASE : (x) == HW_UART5 ? REGS_UART5_BASE : (x) == HW_UART6 ? REGS_UART6_BASE : (x) == HW_UART7 ? REGS_UART7_BASE : REGS_UART8_BASE)

//! @brief Get the instance number given a base address.
//! @param b Base address for an instance of UART.
#define REGS_UART_INSTANCE(b) ( (b) == REGS_UART1_BASE ? HW_UART1 : (b) == REGS_UART2_BASE ? HW_UART2 : (b) == REGS_UART3_BASE ? HW_UART3 : (b) == REGS_UART4_BASE ? HW_UART4 : (b) == REGS_UART5_BASE ? HW_UART5 : (b) == REGS_UART6_BASE ? HW_UART6 : (b) == REGS_UART7_BASE ? HW_UART7 : (b) == REGS_UART8_BASE ? HW_UART8 : 0)
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_URXD - UART Receiver Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_URXD - UART Receiver Register (RO)
 *
 * Reset value: 0x00000000
 *
 * The UART will yield a transfer error on the peripheral bus when core is reading URXD register
 * with receive interface disabled (RXEN=0 or UARTEN=0).
 */
typedef union _hw_uart_urxd
{
    reg32_t U;
    struct _hw_uart_urxd_bitfields
    {
        unsigned RX_DATA : 8; //!< [7:0] Received Data .
        unsigned RESERVED0 : 2; //!< [9:8] Reserved
        unsigned PRERR : 1; //!< [10] In RS-485 mode, it holds the ninth data bit (bit [8]) of received 9-bit RS-485 data
        unsigned BRK : 1; //!< [11] BREAK Detect.
        unsigned FRMERR : 1; //!< [12] Frame Error.
        unsigned OVRRUN : 1; //!< [13] Receiver Overrun.
        unsigned ERR : 1; //!< [14] Error Detect.
        unsigned CHARRDY : 1; //!< [15] Character Ready.
        unsigned RESERVED1 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_urxd_t;
#endif

/*!
 * @name Constants and macros for entire UART_URXD register
 */
//@{
#define HW_UART_URXD_ADDR(x)      (REGS_UART_BASE(x) + 0x0)

#ifndef __LANGUAGE_ASM__
#define HW_UART_URXD(x)           (*(volatile hw_uart_urxd_t *) HW_UART_URXD_ADDR(x))
#define HW_UART_URXD_RD(x)        (HW_UART_URXD(x).U)
#endif
//@}

/*
 * constants & macros for individual UART_URXD bitfields
 */

/*! @name Register UART_URXD, field RX_DATA[7:0] (RO)
 *
 * Received Data . Holds the received character. In 7-bit mode, the most significant bit (MSB) is
 * forced to 0. In 8-bit mode, all bits are active.
 */
//@{
#define BP_UART_URXD_RX_DATA      (0)      //!< Bit position for UART_URXD_RX_DATA.
#define BM_UART_URXD_RX_DATA      (0x000000ff)  //!< Bit mask for UART_URXD_RX_DATA.

//! @brief Get value of UART_URXD_RX_DATA from a register value.
#define BG_UART_URXD_RX_DATA(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_URXD_RX_DATA) >> BP_UART_URXD_RX_DATA)
//@}

/*! @name Register UART_URXD, field PRERR[10] (RO)
 *
 * In RS-485 mode, it holds the ninth data bit (bit [8]) of received 9-bit RS-485 data In RS232/IrDA
 * mode, it is the Parity Error flag . Indicates whether the current character was detected with a
 * parity error and is possibly corrupted. PRERR is updated for each character read from the RxFIFO.
 * When parity is disabled, PRERR always reads as 0.
 *
 * Values:
 * - 0 - = No parity error was detected for data in the RX_DATA field
 * - 1 - = A parity error was detected for data in the RX_DATA field
 */
//@{
#define BP_UART_URXD_PRERR      (10)      //!< Bit position for UART_URXD_PRERR.
#define BM_UART_URXD_PRERR      (0x00000400)  //!< Bit mask for UART_URXD_PRERR.

//! @brief Get value of UART_URXD_PRERR from a register value.
#define BG_UART_URXD_PRERR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_URXD_PRERR) >> BP_UART_URXD_PRERR)
//@}

/*! @name Register UART_URXD, field BRK[11] (RO)
 *
 * BREAK Detect. Indicates whether the current character was detected as a BREAK character. The data
 * bits and the stop bit are all 0. The FRMERR bit is set when BRK is set. When odd parity is
 * selected, PRERR is also set when BRK is set. BRK is valid for each character read from the
 * RxFIFO.
 *
 * Values:
 * - 0 - The current character is not a BREAK character
 * - 1 - The current character is a BREAK character
 */
//@{
#define BP_UART_URXD_BRK      (11)      //!< Bit position for UART_URXD_BRK.
#define BM_UART_URXD_BRK      (0x00000800)  //!< Bit mask for UART_URXD_BRK.

//! @brief Get value of UART_URXD_BRK from a register value.
#define BG_UART_URXD_BRK(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_URXD_BRK) >> BP_UART_URXD_BRK)
//@}

/*! @name Register UART_URXD, field FRMERR[12] (RO)
 *
 * Frame Error. Indicates whether the current character had a framing error (a missing stop bit) and
 * is possibly corrupted. FRMERR is updated for each character read from the RxFIFO.
 *
 * Values:
 * - 0 - The current character has no framing error
 * - 1 - The current character has a framing error
 */
//@{
#define BP_UART_URXD_FRMERR      (12)      //!< Bit position for UART_URXD_FRMERR.
#define BM_UART_URXD_FRMERR      (0x00001000)  //!< Bit mask for UART_URXD_FRMERR.

//! @brief Get value of UART_URXD_FRMERR from a register value.
#define BG_UART_URXD_FRMERR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_URXD_FRMERR) >> BP_UART_URXD_FRMERR)
//@}

/*! @name Register UART_URXD, field OVRRUN[13] (RO)
 *
 * Receiver Overrun. This read-only bit, when HIGH, indicates that the corresponding character was
 * stored in the last position (32nd) of the Rx FIFO. Even if a 33rd character has not been
 * detected, this bit will be set to '1' for the 32nd character.
 *
 * Values:
 * - 0 - No RxFIFO overrun was detected
 * - 1 - A RxFIFO overrun was detected
 */
//@{
#define BP_UART_URXD_OVRRUN      (13)      //!< Bit position for UART_URXD_OVRRUN.
#define BM_UART_URXD_OVRRUN      (0x00002000)  //!< Bit mask for UART_URXD_OVRRUN.

//! @brief Get value of UART_URXD_OVRRUN from a register value.
#define BG_UART_URXD_OVRRUN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_URXD_OVRRUN) >> BP_UART_URXD_OVRRUN)
//@}

/*! @name Register UART_URXD, field ERR[14] (RO)
 *
 * Error Detect. Indicates whether the character present in the RX_DATA field has an error (OVRRUN,
 * FRMERR, BRK or PRERR) status. The ERR bit is updated and valid for each received character.
 *
 * Values:
 * - 0 - No error status was detected
 * - 1 - An error status was detected
 */
//@{
#define BP_UART_URXD_ERR      (14)      //!< Bit position for UART_URXD_ERR.
#define BM_UART_URXD_ERR      (0x00004000)  //!< Bit mask for UART_URXD_ERR.

//! @brief Get value of UART_URXD_ERR from a register value.
#define BG_UART_URXD_ERR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_URXD_ERR) >> BP_UART_URXD_ERR)
//@}

/*! @name Register UART_URXD, field CHARRDY[15] (RO)
 *
 * Character Ready. This read-only bit indicates an invalid read when the FIFO becomes empty and
 * software tries to read the same old data. This bit should not be used for polling for data
 * written to the RX FIFO.
 *
 * Values:
 * - 0 - Character in RX_DATA field and associated flags are invalid.
 * - 1 - Character in RX_DATA field and associated flags valid and ready for reading.
 */
//@{
#define BP_UART_URXD_CHARRDY      (15)      //!< Bit position for UART_URXD_CHARRDY.
#define BM_UART_URXD_CHARRDY      (0x00008000)  //!< Bit mask for UART_URXD_CHARRDY.

//! @brief Get value of UART_URXD_CHARRDY from a register value.
#define BG_UART_URXD_CHARRDY(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_URXD_CHARRDY) >> BP_UART_URXD_CHARRDY)
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UTXD - UART Transmitter Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UTXD - UART Transmitter Register (WO)
 *
 * Reset value: 0x00000000
 *
 * The UART will yield a transfer error on the peripheral bus when core is writing into UART_URXD
 * register with transmit interface disabled (TXEN=0 or UARTEN=0). Memory space between UART_URXD
 * and UART_UTXD registers is reserved. Any read or write access to this space will be considered as
 * an invalid access and yield a transfer error .
 */
typedef union _hw_uart_utxd
{
    reg32_t U;
    struct _hw_uart_utxd_bitfields
    {
        unsigned TX_DATA : 8; //!< [7:0] Transmit Data .
        unsigned RESERVED0 : 24; //!< [31:8] Reserved.
    } B;
} hw_uart_utxd_t;
#endif

/*!
 * @name Constants and macros for entire UART_UTXD register
 */
//@{
#define HW_UART_UTXD_ADDR(x)      (REGS_UART_BASE(x) + 0x40)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UTXD(x)           (*(volatile hw_uart_utxd_t *) HW_UART_UTXD_ADDR(x))
#define HW_UART_UTXD_WR(x, v)     (HW_UART_UTXD(x).U = (v))
#endif
//@}

/*
 * constants & macros for individual UART_UTXD bitfields
 */

/*! @name Register UART_UTXD, field TX_DATA[7:0] (WO)
 *
 * Transmit Data . Holds the parallel transmit data inputs. In 7-bit mode, D7 is ignored. In 8-bit
 * mode, all bits are used. Data is transmitted least significant bit (LSB) first. A new character
 * is transmitted when the TX_DATA field is written. The TX_DATA field must be written only when the
 * TRDY bit is high to ensure that corrupted data is not sent.
 */
//@{
#define BP_UART_UTXD_TX_DATA      (0)      //!< Bit position for UART_UTXD_TX_DATA.
#define BM_UART_UTXD_TX_DATA      (0x000000ff)  //!< Bit mask for UART_UTXD_TX_DATA.

//! @brief Get value of UART_UTXD_TX_DATA from a register value.
#define BG_UART_UTXD_TX_DATA(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTXD_TX_DATA) >> BP_UART_UTXD_TX_DATA)

//! @brief Format value for bitfield UART_UTXD_TX_DATA.
#define BF_UART_UTXD_TX_DATA(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTXD_TX_DATA) & BM_UART_UTXD_TX_DATA)
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UCR1 - UART Control Register 1
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UCR1 - UART Control Register 1 (RW)
 *
 * Reset value: 0x00000000
 */
typedef union _hw_uart_ucr1
{
    reg32_t U;
    struct _hw_uart_ucr1_bitfields
    {
        unsigned UARTEN : 1; //!< [0] UART Enable .
        unsigned DOZE : 1; //!< [1] DOZE .
        unsigned ATDMAEN : 1; //!< [2] Aging DMA Timer Enable .
        unsigned TXDMAEN : 1; //!< [3] Transmitter Ready DMA Enable .
        unsigned SNDBRK : 1; //!< [4] Send BREAK .
        unsigned RTSDEN : 1; //!< [5] RTS Delta Interrupt Enable .
        unsigned TXMPTYEN : 1; //!< [6] Transmitter Empty Interrupt Enable .
        unsigned IREN : 1; //!< [7] Infrared Interface Enable .
        unsigned RXDMAEN : 1; //!< [8] Receive Ready DMA Enable .
        unsigned RRDYEN : 1; //!< [9] Receiver Ready Interrupt Enable .
        unsigned ICD : 2; //!< [11:10] Idle Condition Detect .
        unsigned IDEN : 1; //!< [12] Idle Condition Detected Interrupt Enable .
        unsigned TRDYEN : 1; //!< [13] Transmitter Ready Interrupt Enable .
        unsigned ADBR : 1; //!< [14] Automatic Detection of Baud Rate .
        unsigned ADEN : 1; //!< [15] Automatic Baud Rate Detection Interrupt Enable .
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ucr1_t;
#endif

/*!
 * @name Constants and macros for entire UART_UCR1 register
 */
//@{
#define HW_UART_UCR1_ADDR(x)      (REGS_UART_BASE(x) + 0x80)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UCR1(x)           (*(volatile hw_uart_ucr1_t *) HW_UART_UCR1_ADDR(x))
#define HW_UART_UCR1_RD(x)        (HW_UART_UCR1(x).U)
#define HW_UART_UCR1_WR(x, v)     (HW_UART_UCR1(x).U = (v))
#define HW_UART_UCR1_SET(x, v)    (HW_UART_UCR1_WR(x, HW_UART_UCR1_RD(x) |  (v)))
#define HW_UART_UCR1_CLR(x, v)    (HW_UART_UCR1_WR(x, HW_UART_UCR1_RD(x) & ~(v)))
#define HW_UART_UCR1_TOG(x, v)    (HW_UART_UCR1_WR(x, HW_UART_UCR1_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UCR1 bitfields
 */

/*! @name Register UART_UCR1, field UARTEN[0] (RW)
 *
 * UART Enable . Enables/Disables the UART. If UARTEN is negated in the middle of a transmission,
 * the transmitter stops and pulls the TXD line to a logic 1. UARTEN must be set to 1 before any
 * access to UTXD and URXD registers, otherwise a transfer error is returned. This bit can be set to
 * 1 along with other bits in this register. There is no restriction to the sequence of programing
 * this bit and other control registers.
 *
 * Values:
 * - 0 - Disable the UART
 * - 1 - Enable the UART
 */
//@{
#define BP_UART_UCR1_UARTEN      (0)      //!< Bit position for UART_UCR1_UARTEN.
#define BM_UART_UCR1_UARTEN      (0x00000001)  //!< Bit mask for UART_UCR1_UARTEN.

//! @brief Get value of UART_UCR1_UARTEN from a register value.
#define BG_UART_UCR1_UARTEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_UARTEN) >> BP_UART_UCR1_UARTEN)

//! @brief Format value for bitfield UART_UCR1_UARTEN.
#define BF_UART_UCR1_UARTEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_UARTEN) & BM_UART_UCR1_UARTEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the UARTEN field to a new value.
#define BW_UART_UCR1_UARTEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_UARTEN) | BF_UART_UCR1_UARTEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field DOZE[1] (RW)
 *
 * DOZE . Determines the UART enable condition in the DOZE state. When doze_req input pin is at '1',
 * (the ARM Platform executes a doze instruction and the system is placed in the Doze State), the
 * DOZE bit affects operation of the UART. While in the Doze State, if this bit is asserted, the
 * UART is disabled. See the description in .
 *
 * Values:
 * - 0 - The UART is enabled when in DOZE state
 * - 1 - The UART is disabled when in DOZE state
 */
//@{
#define BP_UART_UCR1_DOZE      (1)      //!< Bit position for UART_UCR1_DOZE.
#define BM_UART_UCR1_DOZE      (0x00000002)  //!< Bit mask for UART_UCR1_DOZE.

//! @brief Get value of UART_UCR1_DOZE from a register value.
#define BG_UART_UCR1_DOZE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_DOZE) >> BP_UART_UCR1_DOZE)

//! @brief Format value for bitfield UART_UCR1_DOZE.
#define BF_UART_UCR1_DOZE(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_DOZE) & BM_UART_UCR1_DOZE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DOZE field to a new value.
#define BW_UART_UCR1_DOZE(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_DOZE) | BF_UART_UCR1_DOZE(v)))
#endif
//@}

/*! @name Register UART_UCR1, field ATDMAEN[2] (RW)
 *
 * Aging DMA Timer Enable . Enables/Disables the receive DMA request dma_req_rx for the aging timer
 * interrupt (triggered with AGTIM flag in USR1[8]).
 *
 * Values:
 * - 0 - Disable AGTIM DMA request
 * - 1 - Enable AGTIM DMA request
 */
//@{
#define BP_UART_UCR1_ATDMAEN      (2)      //!< Bit position for UART_UCR1_ATDMAEN.
#define BM_UART_UCR1_ATDMAEN      (0x00000004)  //!< Bit mask for UART_UCR1_ATDMAEN.

//! @brief Get value of UART_UCR1_ATDMAEN from a register value.
#define BG_UART_UCR1_ATDMAEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_ATDMAEN) >> BP_UART_UCR1_ATDMAEN)

//! @brief Format value for bitfield UART_UCR1_ATDMAEN.
#define BF_UART_UCR1_ATDMAEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_ATDMAEN) & BM_UART_UCR1_ATDMAEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ATDMAEN field to a new value.
#define BW_UART_UCR1_ATDMAEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_ATDMAEN) | BF_UART_UCR1_ATDMAEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field TXDMAEN[3] (RW)
 *
 * Transmitter Ready DMA Enable . Enables/Disables the transmit DMA request dma_req_tx when the
 * transmitter has one or more slots available in the TxFIFO. The fill level in the TxFIFO that
 * generates the dma_req_tx is controlled by the TXTL bits. A DMA request will be issued as long as
 * TXDMAEN and TRDY are high even if the transmitter is not enabled. In general, user should enable
 * the transmitter before enabling the transmit DMA request.
 *
 * Values:
 * - 0 - Disable transmit DMA request
 * - 1 - Enable transmit DMA request
 */
//@{
#define BP_UART_UCR1_TXDMAEN      (3)      //!< Bit position for UART_UCR1_TXDMAEN.
#define BM_UART_UCR1_TXDMAEN      (0x00000008)  //!< Bit mask for UART_UCR1_TXDMAEN.

//! @brief Get value of UART_UCR1_TXDMAEN from a register value.
#define BG_UART_UCR1_TXDMAEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_TXDMAEN) >> BP_UART_UCR1_TXDMAEN)

//! @brief Format value for bitfield UART_UCR1_TXDMAEN.
#define BF_UART_UCR1_TXDMAEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_TXDMAEN) & BM_UART_UCR1_TXDMAEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TXDMAEN field to a new value.
#define BW_UART_UCR1_TXDMAEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_TXDMAEN) | BF_UART_UCR1_TXDMAEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field SNDBRK[4] (RW)
 *
 * Send BREAK . Forces the transmitter to send a BREAK character. The transmitter finishes sending
 * the character in progress (if any) and sends BREAK characters until SNDBRK is reset. Because the
 * transmitter samples SNDBRK after every bit is transmitted, it is important that SNDBRK is
 * asserted high for a sufficient period of time to generate a valid BREAK. After the BREAK
 * transmission completes, the UART transmits 2 mark bits. The user can continue to fill the TxFIFO
 * and any characters remaining are transmitted when the BREAK is terminated.
 *
 * Values:
 * - 0 - Do not send a BREAK character
 * - 1 - Send a BREAK character (continuous 0s)
 */
//@{
#define BP_UART_UCR1_SNDBRK      (4)      //!< Bit position for UART_UCR1_SNDBRK.
#define BM_UART_UCR1_SNDBRK      (0x00000010)  //!< Bit mask for UART_UCR1_SNDBRK.

//! @brief Get value of UART_UCR1_SNDBRK from a register value.
#define BG_UART_UCR1_SNDBRK(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_SNDBRK) >> BP_UART_UCR1_SNDBRK)

//! @brief Format value for bitfield UART_UCR1_SNDBRK.
#define BF_UART_UCR1_SNDBRK(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_SNDBRK) & BM_UART_UCR1_SNDBRK)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SNDBRK field to a new value.
#define BW_UART_UCR1_SNDBRK(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_SNDBRK) | BF_UART_UCR1_SNDBRK(v)))
#endif
//@}

/*! @name Register UART_UCR1, field RTSDEN[5] (RW)
 *
 * RTS Delta Interrupt Enable . Enables/Disables the RTSD interrupt. The current status of the RTS
 * pin is read in the RTSS bit.
 *
 * Values:
 * - 0 - Disable RTSD interrupt
 * - 1 - Enable RTSD interrupt
 */
//@{
#define BP_UART_UCR1_RTSDEN      (5)      //!< Bit position for UART_UCR1_RTSDEN.
#define BM_UART_UCR1_RTSDEN      (0x00000020)  //!< Bit mask for UART_UCR1_RTSDEN.

//! @brief Get value of UART_UCR1_RTSDEN from a register value.
#define BG_UART_UCR1_RTSDEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_RTSDEN) >> BP_UART_UCR1_RTSDEN)

//! @brief Format value for bitfield UART_UCR1_RTSDEN.
#define BF_UART_UCR1_RTSDEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_RTSDEN) & BM_UART_UCR1_RTSDEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RTSDEN field to a new value.
#define BW_UART_UCR1_RTSDEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_RTSDEN) | BF_UART_UCR1_RTSDEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field TXMPTYEN[6] (RW)
 *
 * Transmitter Empty Interrupt Enable . Enables/Disables the transmitter FIFO empty (TXFE)
 * interrupt. interrupt_uart . When negated, the TXFE interrupt is disabled. An interrupt will be
 * issued as long as TXMPTYEN and TXFE are high even if the transmitter is not enabled. In general,
 * user should enable the transmitter before enabling the TXFE interrupt.
 *
 * Values:
 * - 0 - Disable the transmitter FIFO empty interrupt
 * - 1 - Enable the transmitter FIFO empty interrupt
 */
//@{
#define BP_UART_UCR1_TXMPTYEN      (6)      //!< Bit position for UART_UCR1_TXMPTYEN.
#define BM_UART_UCR1_TXMPTYEN      (0x00000040)  //!< Bit mask for UART_UCR1_TXMPTYEN.

//! @brief Get value of UART_UCR1_TXMPTYEN from a register value.
#define BG_UART_UCR1_TXMPTYEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_TXMPTYEN) >> BP_UART_UCR1_TXMPTYEN)

//! @brief Format value for bitfield UART_UCR1_TXMPTYEN.
#define BF_UART_UCR1_TXMPTYEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_TXMPTYEN) & BM_UART_UCR1_TXMPTYEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TXMPTYEN field to a new value.
#define BW_UART_UCR1_TXMPTYEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_TXMPTYEN) | BF_UART_UCR1_TXMPTYEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field IREN[7] (RW)
 *
 * Infrared Interface Enable . Enables/Disables the IR interface. See the IR interface description
 * in , for more information. Note: MDEN(UMCR[0]) must be cleared to 0 when using IrDA interface.
 * See
 *
 * Values:
 * - 0 - Disable the IR interface
 * - 1 - Enable the IR interface
 */
//@{
#define BP_UART_UCR1_IREN      (7)      //!< Bit position for UART_UCR1_IREN.
#define BM_UART_UCR1_IREN      (0x00000080)  //!< Bit mask for UART_UCR1_IREN.

//! @brief Get value of UART_UCR1_IREN from a register value.
#define BG_UART_UCR1_IREN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_IREN) >> BP_UART_UCR1_IREN)

//! @brief Format value for bitfield UART_UCR1_IREN.
#define BF_UART_UCR1_IREN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_IREN) & BM_UART_UCR1_IREN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IREN field to a new value.
#define BW_UART_UCR1_IREN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_IREN) | BF_UART_UCR1_IREN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field RXDMAEN[8] (RW)
 *
 * Receive Ready DMA Enable . Enables/Disables the receive DMA request dma_req_rx when the receiver
 * has data in the RxFIFO. The fill level in the RxFIFO at which a DMA request is generated is
 * controlled by the RXTL bits. When negated, the receive DMA request is disabled.
 *
 * Values:
 * - 0 - Disable DMA request
 * - 1 - Enable DMA request
 */
//@{
#define BP_UART_UCR1_RXDMAEN      (8)      //!< Bit position for UART_UCR1_RXDMAEN.
#define BM_UART_UCR1_RXDMAEN      (0x00000100)  //!< Bit mask for UART_UCR1_RXDMAEN.

//! @brief Get value of UART_UCR1_RXDMAEN from a register value.
#define BG_UART_UCR1_RXDMAEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_RXDMAEN) >> BP_UART_UCR1_RXDMAEN)

//! @brief Format value for bitfield UART_UCR1_RXDMAEN.
#define BF_UART_UCR1_RXDMAEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_RXDMAEN) & BM_UART_UCR1_RXDMAEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXDMAEN field to a new value.
#define BW_UART_UCR1_RXDMAEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_RXDMAEN) | BF_UART_UCR1_RXDMAEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field RRDYEN[9] (RW)
 *
 * Receiver Ready Interrupt Enable . Enables/Disables the RRDY interrupt when the RxFIFO contains
 * data. The fill level in the RxFIFO at which an interrupt is generated is controlled by the RXTL
 * bits. When RRDYEN is negated, the receiver ready interrupt is disabled.
 *
 * Values:
 * - 0 - Disables the RRDY interrupt
 * - 1 - Enables the RRDY interrupt
 */
//@{
#define BP_UART_UCR1_RRDYEN      (9)      //!< Bit position for UART_UCR1_RRDYEN.
#define BM_UART_UCR1_RRDYEN      (0x00000200)  //!< Bit mask for UART_UCR1_RRDYEN.

//! @brief Get value of UART_UCR1_RRDYEN from a register value.
#define BG_UART_UCR1_RRDYEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_RRDYEN) >> BP_UART_UCR1_RRDYEN)

//! @brief Format value for bitfield UART_UCR1_RRDYEN.
#define BF_UART_UCR1_RRDYEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_RRDYEN) & BM_UART_UCR1_RRDYEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RRDYEN field to a new value.
#define BW_UART_UCR1_RRDYEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_RRDYEN) | BF_UART_UCR1_RRDYEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field ICD[11:10] (RW)
 *
 * Idle Condition Detect . Controls the number of frames RXD is allowed to be idle before an idle
 * condition is reported.
 *
 * Values:
 * - 00 - Idle for more than 4 frames
 * - 01 - Idle for more than 8 frames
 * - 10 - Idle for more than 16 frames
 * - 11 - Idle for more than 32 frames
 */
//@{
#define BP_UART_UCR1_ICD      (10)      //!< Bit position for UART_UCR1_ICD.
#define BM_UART_UCR1_ICD      (0x00000c00)  //!< Bit mask for UART_UCR1_ICD.

//! @brief Get value of UART_UCR1_ICD from a register value.
#define BG_UART_UCR1_ICD(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_ICD) >> BP_UART_UCR1_ICD)

//! @brief Format value for bitfield UART_UCR1_ICD.
#define BF_UART_UCR1_ICD(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_ICD) & BM_UART_UCR1_ICD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ICD field to a new value.
#define BW_UART_UCR1_ICD(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_ICD) | BF_UART_UCR1_ICD(v)))
#endif
//@}

/*! @name Register UART_UCR1, field IDEN[12] (RW)
 *
 * Idle Condition Detected Interrupt Enable . Enables/Disables the IDLE bit to generate an interrupt
 * ( interrupt_uart = 0).
 *
 * Values:
 * - 0 - Disable the IDLE interrupt
 * - 1 - Enable the IDLE interrupt
 */
//@{
#define BP_UART_UCR1_IDEN      (12)      //!< Bit position for UART_UCR1_IDEN.
#define BM_UART_UCR1_IDEN      (0x00001000)  //!< Bit mask for UART_UCR1_IDEN.

//! @brief Get value of UART_UCR1_IDEN from a register value.
#define BG_UART_UCR1_IDEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_IDEN) >> BP_UART_UCR1_IDEN)

//! @brief Format value for bitfield UART_UCR1_IDEN.
#define BF_UART_UCR1_IDEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_IDEN) & BM_UART_UCR1_IDEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IDEN field to a new value.
#define BW_UART_UCR1_IDEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_IDEN) | BF_UART_UCR1_IDEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field TRDYEN[13] (RW)
 *
 * Transmitter Ready Interrupt Enable . Enables/Disables the transmitter Ready Interrupt (TRDY) when
 * the transmitter has one or more slots available in the TxFIFO. The fill level in the TXFIFO at
 * which an interrupt is generated is controlled by TxTL bits. When TRDYEN is negated, the
 * transmitter ready interrupt is disabled. An interrupt will be issued as long as TRDYEN and TRDY
 * are high even if the transmitter is not enabled. In general, user should enable the transmitter
 * before enabling the TRDY interrupt.
 *
 * Values:
 * - 0 - Disable the transmitter ready interrupt
 * - 1 - Enable the transmitter ready interrupt
 */
//@{
#define BP_UART_UCR1_TRDYEN      (13)      //!< Bit position for UART_UCR1_TRDYEN.
#define BM_UART_UCR1_TRDYEN      (0x00002000)  //!< Bit mask for UART_UCR1_TRDYEN.

//! @brief Get value of UART_UCR1_TRDYEN from a register value.
#define BG_UART_UCR1_TRDYEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_TRDYEN) >> BP_UART_UCR1_TRDYEN)

//! @brief Format value for bitfield UART_UCR1_TRDYEN.
#define BF_UART_UCR1_TRDYEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_TRDYEN) & BM_UART_UCR1_TRDYEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TRDYEN field to a new value.
#define BW_UART_UCR1_TRDYEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_TRDYEN) | BF_UART_UCR1_TRDYEN(v)))
#endif
//@}

/*! @name Register UART_UCR1, field ADBR[14] (RW)
 *
 * Automatic Detection of Baud Rate . Enables/Disables automatic baud rate detection. When the ADBR
 * bit is set and the ADET bit is cleared, the receiver detects the incoming baud rate
 * automatically. The ADET flag is set when the receiver verifies that the incoming baud rate is
 * detected properly by detecting an ASCII character "A" or "a" (0x41 or 0x61).
 *
 * Values:
 * - 0 - Disable automatic detection of baud rate
 * - 1 - Enable automatic detection of baud rate
 */
//@{
#define BP_UART_UCR1_ADBR      (14)      //!< Bit position for UART_UCR1_ADBR.
#define BM_UART_UCR1_ADBR      (0x00004000)  //!< Bit mask for UART_UCR1_ADBR.

//! @brief Get value of UART_UCR1_ADBR from a register value.
#define BG_UART_UCR1_ADBR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_ADBR) >> BP_UART_UCR1_ADBR)

//! @brief Format value for bitfield UART_UCR1_ADBR.
#define BF_UART_UCR1_ADBR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_ADBR) & BM_UART_UCR1_ADBR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ADBR field to a new value.
#define BW_UART_UCR1_ADBR(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_ADBR) | BF_UART_UCR1_ADBR(v)))
#endif
//@}

/*! @name Register UART_UCR1, field ADEN[15] (RW)
 *
 * Automatic Baud Rate Detection Interrupt Enable . Enables/Disables the automatic baud rate detect
 * complete (ADET) bit to generate an interrupt ( interrupt_uart = 0).
 *
 * Values:
 * - 0 - Disable the automatic baud rate detection interrupt
 * - 1 - Enable the automatic baud rate detection interrupt
 */
//@{
#define BP_UART_UCR1_ADEN      (15)      //!< Bit position for UART_UCR1_ADEN.
#define BM_UART_UCR1_ADEN      (0x00008000)  //!< Bit mask for UART_UCR1_ADEN.

//! @brief Get value of UART_UCR1_ADEN from a register value.
#define BG_UART_UCR1_ADEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR1_ADEN) >> BP_UART_UCR1_ADEN)

//! @brief Format value for bitfield UART_UCR1_ADEN.
#define BF_UART_UCR1_ADEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR1_ADEN) & BM_UART_UCR1_ADEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ADEN field to a new value.
#define BW_UART_UCR1_ADEN(x, v)   (HW_UART_UCR1_WR(x, (HW_UART_UCR1_RD(x) & ~BM_UART_UCR1_ADEN) | BF_UART_UCR1_ADEN(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UCR2 - UART Control Register 2
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UCR2 - UART Control Register 2 (RW)
 *
 * Reset value: 0x00000001
 */
typedef union _hw_uart_ucr2
{
    reg32_t U;
    struct _hw_uart_ucr2_bitfields
    {
        unsigned SRST : 1; //!< [0] Software Reset .
        unsigned RXEN : 1; //!< [1] Receiver Enable .
        unsigned TXEN : 1; //!< [2] Transmitter Enable .
        unsigned ATEN : 1; //!< [3] Aging Timer Enable .
        unsigned RTSEN : 1; //!< [4] Request to Send Interrupt Enable.
        unsigned WS : 1; //!< [5] Word Size .
        unsigned STPB : 1; //!< [6] Stop .
        unsigned PROE : 1; //!< [7] Parity Odd/Even .
        unsigned PREN : 1; //!< [8] Parity Enable .
        unsigned RTEC : 2; //!< [10:9] Request to Send Edge Control .
        unsigned ESCEN : 1; //!< [11] Escape Enable .
        unsigned CTS : 1; //!< [12] Clear to Send .
        unsigned CTSC : 1; //!< [13] CTS Pin Control .
        unsigned IRTS : 1; //!< [14] Ignore RTS Pin .
        unsigned ESCI : 1; //!< [15] Escape Sequence Interrupt Enable .
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ucr2_t;
#endif

/*!
 * @name Constants and macros for entire UART_UCR2 register
 */
//@{
#define HW_UART_UCR2_ADDR(x)      (REGS_UART_BASE(x) + 0x84)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UCR2(x)           (*(volatile hw_uart_ucr2_t *) HW_UART_UCR2_ADDR(x))
#define HW_UART_UCR2_RD(x)        (HW_UART_UCR2(x).U)
#define HW_UART_UCR2_WR(x, v)     (HW_UART_UCR2(x).U = (v))
#define HW_UART_UCR2_SET(x, v)    (HW_UART_UCR2_WR(x, HW_UART_UCR2_RD(x) |  (v)))
#define HW_UART_UCR2_CLR(x, v)    (HW_UART_UCR2_WR(x, HW_UART_UCR2_RD(x) & ~(v)))
#define HW_UART_UCR2_TOG(x, v)    (HW_UART_UCR2_WR(x, HW_UART_UCR2_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UCR2 bitfields
 */

/*! @name Register UART_UCR2, field SRST[0] (RW)
 *
 * Software Reset . Once the software writes 0 to SRST , the software reset remains active for 4
 * module_clock cycles before the hardware deasserts SRST . The software can only write 0 to SRST .
 * Writing 1 to SRST is ignored.
 *
 * Values:
 * - 0 - Reset the transmit and receive state machines, all FIFOs and register USR1, USR2, UBIR, UBMR, UBRC ,
 *     URXD, UTXD and UTS[6-3].
 * - 1 - No reset
 */
//@{
#define BP_UART_UCR2_SRST      (0)      //!< Bit position for UART_UCR2_SRST.
#define BM_UART_UCR2_SRST      (0x00000001)  //!< Bit mask for UART_UCR2_SRST.

//! @brief Get value of UART_UCR2_SRST from a register value.
#define BG_UART_UCR2_SRST(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_SRST) >> BP_UART_UCR2_SRST)

//! @brief Format value for bitfield UART_UCR2_SRST.
#define BF_UART_UCR2_SRST(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_SRST) & BM_UART_UCR2_SRST)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SRST field to a new value.
#define BW_UART_UCR2_SRST(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_SRST) | BF_UART_UCR2_SRST(v)))
#endif
//@}

/*! @name Register UART_UCR2, field RXEN[1] (RW)
 *
 * Receiver Enable . Enables/Disables the receiver. When the receiver is enabled, if the RXD input
 * is already low, the receiver does not recognize BREAK characters, because it requires a valid
 * 1-to-0 transition before it can accept any character.
 *
 * Values:
 * - 0 - Disable the receiver
 * - 1 - Enable the receiver
 */
//@{
#define BP_UART_UCR2_RXEN      (1)      //!< Bit position for UART_UCR2_RXEN.
#define BM_UART_UCR2_RXEN      (0x00000002)  //!< Bit mask for UART_UCR2_RXEN.

//! @brief Get value of UART_UCR2_RXEN from a register value.
#define BG_UART_UCR2_RXEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_RXEN) >> BP_UART_UCR2_RXEN)

//! @brief Format value for bitfield UART_UCR2_RXEN.
#define BF_UART_UCR2_RXEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_RXEN) & BM_UART_UCR2_RXEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXEN field to a new value.
#define BW_UART_UCR2_RXEN(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_RXEN) | BF_UART_UCR2_RXEN(v)))
#endif
//@}

/*! @name Register UART_UCR2, field TXEN[2] (RW)
 *
 * Transmitter Enable . Enables/Disables the transmitter. When TXEN is negated the transmitter is
 * disabled and idle. When the UARTEN and TXEN bits are set the transmitter is enabled. If TXEN is
 * negated in the middle of a transmission, the UART disables the transmitter immediately, and
 * starts marking 1s. The transmitter FIFO cannot be written when this bit is cleared.
 *
 * Values:
 * - 0 - Disable the transmitter
 * - 1 - Enable the transmitter
 */
//@{
#define BP_UART_UCR2_TXEN      (2)      //!< Bit position for UART_UCR2_TXEN.
#define BM_UART_UCR2_TXEN      (0x00000004)  //!< Bit mask for UART_UCR2_TXEN.

//! @brief Get value of UART_UCR2_TXEN from a register value.
#define BG_UART_UCR2_TXEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_TXEN) >> BP_UART_UCR2_TXEN)

//! @brief Format value for bitfield UART_UCR2_TXEN.
#define BF_UART_UCR2_TXEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_TXEN) & BM_UART_UCR2_TXEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TXEN field to a new value.
#define BW_UART_UCR2_TXEN(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_TXEN) | BF_UART_UCR2_TXEN(v)))
#endif
//@}

/*! @name Register UART_UCR2, field ATEN[3] (RW)
 *
 * Aging Timer Enable . This bit is used to enable the aging timer interrupt (triggered with AGTIM)
 *
 * Values:
 * - 0 - AGTIM interrupt disabled
 * - 1 - AGTIM interrupt enabled
 */
//@{
#define BP_UART_UCR2_ATEN      (3)      //!< Bit position for UART_UCR2_ATEN.
#define BM_UART_UCR2_ATEN      (0x00000008)  //!< Bit mask for UART_UCR2_ATEN.

//! @brief Get value of UART_UCR2_ATEN from a register value.
#define BG_UART_UCR2_ATEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_ATEN) >> BP_UART_UCR2_ATEN)

//! @brief Format value for bitfield UART_UCR2_ATEN.
#define BF_UART_UCR2_ATEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_ATEN) & BM_UART_UCR2_ATEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ATEN field to a new value.
#define BW_UART_UCR2_ATEN(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_ATEN) | BF_UART_UCR2_ATEN(v)))
#endif
//@}

/*! @name Register UART_UCR2, field RTSEN[4] (RW)
 *
 * Request to Send Interrupt Enable. Controls the RTS edge sensitive interrupt. When RTSEN is
 * asserted and the programmed edge is detected on the RTS pin (the RTSF bit is asserted), an
 * interrupt will be generated on the interrupt_uart pin. (See .)
 *
 * Values:
 * - 0 - Disable request to send interrupt
 * - 1 - Enable request to send interrupt
 */
//@{
#define BP_UART_UCR2_RTSEN      (4)      //!< Bit position for UART_UCR2_RTSEN.
#define BM_UART_UCR2_RTSEN      (0x00000010)  //!< Bit mask for UART_UCR2_RTSEN.

//! @brief Get value of UART_UCR2_RTSEN from a register value.
#define BG_UART_UCR2_RTSEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_RTSEN) >> BP_UART_UCR2_RTSEN)

//! @brief Format value for bitfield UART_UCR2_RTSEN.
#define BF_UART_UCR2_RTSEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_RTSEN) & BM_UART_UCR2_RTSEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RTSEN field to a new value.
#define BW_UART_UCR2_RTSEN(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_RTSEN) | BF_UART_UCR2_RTSEN(v)))
#endif
//@}

/*! @name Register UART_UCR2, field WS[5] (RW)
 *
 * Word Size . Controls the character length. When WS is high, the transmitter and receiver are in
 * 8-bit mode. When WS is low, they are in 7-bit mode. The transmitter ignores bit 7 and the
 * receiver sets bit 7 to 0. WS can be changed in-between transmission (reception) of characters,
 * however not when a transmission (reception) is in progress, in which case the length of the
 * current character being transmitted (received) is unpredictable.
 *
 * Values:
 * - 0 - 7-bit transmit and receive character length (not including START, STOP or PARITY bits)
 * - 1 - 8-bit transmit and receive character length (not including START, STOP or PARITY bits)
 */
//@{
#define BP_UART_UCR2_WS      (5)      //!< Bit position for UART_UCR2_WS.
#define BM_UART_UCR2_WS      (0x00000020)  //!< Bit mask for UART_UCR2_WS.

//! @brief Get value of UART_UCR2_WS from a register value.
#define BG_UART_UCR2_WS(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_WS) >> BP_UART_UCR2_WS)

//! @brief Format value for bitfield UART_UCR2_WS.
#define BF_UART_UCR2_WS(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_WS) & BM_UART_UCR2_WS)

#ifndef __LANGUAGE_ASM__
//! @brief Set the WS field to a new value.
#define BW_UART_UCR2_WS(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_WS) | BF_UART_UCR2_WS(v)))
#endif
//@}

/*! @name Register UART_UCR2, field STPB[6] (RW)
 *
 * Stop . Controls the number of stop bits after a character. When STPB is low, 1 stop bit is sent.
 * When STPB is high, 2 stop bits are sent. STPB also affects the receiver.
 *
 * Values:
 * - 0 - The transmitter sends 1 stop bit. The receiver expects 1 or more stop bits.
 * - 1 - The transmitter sends 2 stop bits. The receiver expects 2 or more stop bits.
 */
//@{
#define BP_UART_UCR2_STPB      (6)      //!< Bit position for UART_UCR2_STPB.
#define BM_UART_UCR2_STPB      (0x00000040)  //!< Bit mask for UART_UCR2_STPB.

//! @brief Get value of UART_UCR2_STPB from a register value.
#define BG_UART_UCR2_STPB(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_STPB) >> BP_UART_UCR2_STPB)

//! @brief Format value for bitfield UART_UCR2_STPB.
#define BF_UART_UCR2_STPB(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_STPB) & BM_UART_UCR2_STPB)

#ifndef __LANGUAGE_ASM__
//! @brief Set the STPB field to a new value.
#define BW_UART_UCR2_STPB(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_STPB) | BF_UART_UCR2_STPB(v)))
#endif
//@}

/*! @name Register UART_UCR2, field PROE[7] (RW)
 *
 * Parity Odd/Even . Controls the sense of the parity generator and checker. When PROE is high, odd
 * parity is generated and expected. When PROE is low, even parity is generated and expected. PROE
 * has no function if PREN is low.
 *
 * Values:
 * - 0 - Even parity
 * - 1 - Odd parity
 */
//@{
#define BP_UART_UCR2_PROE      (7)      //!< Bit position for UART_UCR2_PROE.
#define BM_UART_UCR2_PROE      (0x00000080)  //!< Bit mask for UART_UCR2_PROE.

//! @brief Get value of UART_UCR2_PROE from a register value.
#define BG_UART_UCR2_PROE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_PROE) >> BP_UART_UCR2_PROE)

//! @brief Format value for bitfield UART_UCR2_PROE.
#define BF_UART_UCR2_PROE(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_PROE) & BM_UART_UCR2_PROE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the PROE field to a new value.
#define BW_UART_UCR2_PROE(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_PROE) | BF_UART_UCR2_PROE(v)))
#endif
//@}

/*! @name Register UART_UCR2, field PREN[8] (RW)
 *
 * Parity Enable . Enables/Disables the parity generator in the transmitter and parity checker in
 * the receiver. When PREN is asserted, the parity generator and checker are enabled, and disabled
 * when PREN is negated.
 *
 * Values:
 * - 0 - Disable parity generator and checker
 * - 1 - Enable parity generator and checker
 */
//@{
#define BP_UART_UCR2_PREN      (8)      //!< Bit position for UART_UCR2_PREN.
#define BM_UART_UCR2_PREN      (0x00000100)  //!< Bit mask for UART_UCR2_PREN.

//! @brief Get value of UART_UCR2_PREN from a register value.
#define BG_UART_UCR2_PREN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_PREN) >> BP_UART_UCR2_PREN)

//! @brief Format value for bitfield UART_UCR2_PREN.
#define BF_UART_UCR2_PREN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_PREN) & BM_UART_UCR2_PREN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the PREN field to a new value.
#define BW_UART_UCR2_PREN(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_PREN) | BF_UART_UCR2_PREN(v)))
#endif
//@}

/*! @name Register UART_UCR2, field RTEC[10:9] (RW)
 *
 * Request to Send Edge Control . Selects the edge that triggers the RTS interrupt. This has no
 * effect on the RTS delta interrupt. RTEC has an effect only when RTSEN = 1 (see ).
 *
 * Values:
 * - 00 - Trigger interrupt on a rising edge
 * - 01 - Trigger interrupt on a falling edge
 * - 1X - Trigger interrupt on any edge
 */
//@{
#define BP_UART_UCR2_RTEC      (9)      //!< Bit position for UART_UCR2_RTEC.
#define BM_UART_UCR2_RTEC      (0x00000600)  //!< Bit mask for UART_UCR2_RTEC.

//! @brief Get value of UART_UCR2_RTEC from a register value.
#define BG_UART_UCR2_RTEC(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_RTEC) >> BP_UART_UCR2_RTEC)

//! @brief Format value for bitfield UART_UCR2_RTEC.
#define BF_UART_UCR2_RTEC(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_RTEC) & BM_UART_UCR2_RTEC)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RTEC field to a new value.
#define BW_UART_UCR2_RTEC(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_RTEC) | BF_UART_UCR2_RTEC(v)))
#endif
//@}

/*! @name Register UART_UCR2, field ESCEN[11] (RW)
 *
 * Escape Enable . Enables/Disables the escape sequence detection logic.
 *
 * Values:
 * - 0 - Disable escape sequence detection
 * - 1 - Enable escape sequence detection
 */
//@{
#define BP_UART_UCR2_ESCEN      (11)      //!< Bit position for UART_UCR2_ESCEN.
#define BM_UART_UCR2_ESCEN      (0x00000800)  //!< Bit mask for UART_UCR2_ESCEN.

//! @brief Get value of UART_UCR2_ESCEN from a register value.
#define BG_UART_UCR2_ESCEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_ESCEN) >> BP_UART_UCR2_ESCEN)

//! @brief Format value for bitfield UART_UCR2_ESCEN.
#define BF_UART_UCR2_ESCEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_ESCEN) & BM_UART_UCR2_ESCEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ESCEN field to a new value.
#define BW_UART_UCR2_ESCEN(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_ESCEN) | BF_UART_UCR2_ESCEN(v)))
#endif
//@}

/*! @name Register UART_UCR2, field CTS[12] (RW)
 *
 * Clear to Send . Controls the CTS pin when the CTSC bit is negated. CTS has no function when CTSC
 * is asserted.
 *
 * Values:
 * - 0 - The CTS pin is high (inactive)
 * - 1 - The CTS pin is low (active)
 */
//@{
#define BP_UART_UCR2_CTS      (12)      //!< Bit position for UART_UCR2_CTS.
#define BM_UART_UCR2_CTS      (0x00001000)  //!< Bit mask for UART_UCR2_CTS.

//! @brief Get value of UART_UCR2_CTS from a register value.
#define BG_UART_UCR2_CTS(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_CTS) >> BP_UART_UCR2_CTS)

//! @brief Format value for bitfield UART_UCR2_CTS.
#define BF_UART_UCR2_CTS(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_CTS) & BM_UART_UCR2_CTS)

#ifndef __LANGUAGE_ASM__
//! @brief Set the CTS field to a new value.
#define BW_UART_UCR2_CTS(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_CTS) | BF_UART_UCR2_CTS(v)))
#endif
//@}

/*! @name Register UART_UCR2, field CTSC[13] (RW)
 *
 * CTS Pin Control . Controls the operation of the CTS output pin. When CTSC is asserted, the CTS
 * output pin is controlled by the receiver. When the RxFIFO is filled to the level of the
 * programmed trigger level and the start bit of the overflowing character (TRIGGER LEVEL + 1) is
 * validated, the CTS output pin is negated to indicate to the far-end transmitter to stop
 * transmitting. When the trigger level is programmed for less than 32, the receiver continues to
 * receive data until the RxFIFO is full. When the CTSC bit is negated, the CTS output pin is
 * controlled by the CTS bit. On reset, because CTSC is cleared to 0, the CTS pin is controlled by
 * the CTS bit, which again is cleared to 0 on reset. This means that on reset the CTS signal is
 * negated.
 *
 * Values:
 * - 0 - The CTS pin is controlled by the CTS bit
 * - 1 - The CTS pin is controlled by the receiver
 */
//@{
#define BP_UART_UCR2_CTSC      (13)      //!< Bit position for UART_UCR2_CTSC.
#define BM_UART_UCR2_CTSC      (0x00002000)  //!< Bit mask for UART_UCR2_CTSC.

//! @brief Get value of UART_UCR2_CTSC from a register value.
#define BG_UART_UCR2_CTSC(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_CTSC) >> BP_UART_UCR2_CTSC)

//! @brief Format value for bitfield UART_UCR2_CTSC.
#define BF_UART_UCR2_CTSC(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_CTSC) & BM_UART_UCR2_CTSC)

#ifndef __LANGUAGE_ASM__
//! @brief Set the CTSC field to a new value.
#define BW_UART_UCR2_CTSC(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_CTSC) | BF_UART_UCR2_CTSC(v)))
#endif
//@}

/*! @name Register UART_UCR2, field IRTS[14] (RW)
 *
 * Ignore RTS Pin . Forces the RTS input signal presented to the transmitter to always be asserted
 * (set to low), effectively ignoring the external pin. When in this mode, the RTS pin serves as a
 * general purpose input.
 *
 * Values:
 * - 0 - Transmit only when the RTS pin is asserted
 * - 1 - Ignore the RTS pin
 */
//@{
#define BP_UART_UCR2_IRTS      (14)      //!< Bit position for UART_UCR2_IRTS.
#define BM_UART_UCR2_IRTS      (0x00004000)  //!< Bit mask for UART_UCR2_IRTS.

//! @brief Get value of UART_UCR2_IRTS from a register value.
#define BG_UART_UCR2_IRTS(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_IRTS) >> BP_UART_UCR2_IRTS)

//! @brief Format value for bitfield UART_UCR2_IRTS.
#define BF_UART_UCR2_IRTS(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_IRTS) & BM_UART_UCR2_IRTS)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IRTS field to a new value.
#define BW_UART_UCR2_IRTS(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_IRTS) | BF_UART_UCR2_IRTS(v)))
#endif
//@}

/*! @name Register UART_UCR2, field ESCI[15] (RW)
 *
 * Escape Sequence Interrupt Enable . Enables/Disables the ESCF bit to generate an interrupt.
 *
 * Values:
 * - 0 - Disable the escape sequence interrupt
 * - 1 - Enable the escape sequence interrupt
 */
//@{
#define BP_UART_UCR2_ESCI      (15)      //!< Bit position for UART_UCR2_ESCI.
#define BM_UART_UCR2_ESCI      (0x00008000)  //!< Bit mask for UART_UCR2_ESCI.

//! @brief Get value of UART_UCR2_ESCI from a register value.
#define BG_UART_UCR2_ESCI(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR2_ESCI) >> BP_UART_UCR2_ESCI)

//! @brief Format value for bitfield UART_UCR2_ESCI.
#define BF_UART_UCR2_ESCI(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR2_ESCI) & BM_UART_UCR2_ESCI)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ESCI field to a new value.
#define BW_UART_UCR2_ESCI(x, v)   (HW_UART_UCR2_WR(x, (HW_UART_UCR2_RD(x) & ~BM_UART_UCR2_ESCI) | BF_UART_UCR2_ESCI(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UCR3 - UART Control Register 3
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UCR3 - UART Control Register 3 (RW)
 *
 * Reset value: 0x00000700
 */
typedef union _hw_uart_ucr3
{
    reg32_t U;
    struct _hw_uart_ucr3_bitfields
    {
        unsigned ACIEN : 1; //!< [0] Autobaud Counter Interrupt Enable.
        unsigned INVT : 1; //!< [1] Invert TXD output in RS-232/RS-485 mode, set TXD active level in IrDA mode.
        unsigned RXDMUXSEL : 1; //!< [2] RXD Muxed Input Selected.
        unsigned DTRDEN : 1; //!< [3] Data Terminal Ready Delta Enable .
        unsigned AWAKEN : 1; //!< [4] Asynchronous WAKE Interrupt Enable.
        unsigned AIRINTEN : 1; //!< [5] Asynchronous IR WAKE Interrupt Enable.
        unsigned RXDSEN : 1; //!< [6] Receive Status Interrupt Enable.
        unsigned ADNIMP : 1; //!< [7] Autobaud Detection Not Improved-.
        unsigned RI : 1; //!< [8] Ring Indicator .
        unsigned DCD : 1; //!< [9] Data Carrier Detect .
        unsigned DSR : 1; //!< [10] Data Set Ready .
        unsigned FRAERREN : 1; //!< [11] Frame Error Interrupt Enable.
        unsigned PARERREN : 1; //!< [12] Parity Error Interrupt Enable.
        unsigned DTREN : 1; //!< [13] Data Terminal Ready Interrupt Enable .
        unsigned DPEC : 2; //!< [15:14] DTR/DSR Interrupt Edge Control .
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ucr3_t;
#endif

/*!
 * @name Constants and macros for entire UART_UCR3 register
 */
//@{
#define HW_UART_UCR3_ADDR(x)      (REGS_UART_BASE(x) + 0x88)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UCR3(x)           (*(volatile hw_uart_ucr3_t *) HW_UART_UCR3_ADDR(x))
#define HW_UART_UCR3_RD(x)        (HW_UART_UCR3(x).U)
#define HW_UART_UCR3_WR(x, v)     (HW_UART_UCR3(x).U = (v))
#define HW_UART_UCR3_SET(x, v)    (HW_UART_UCR3_WR(x, HW_UART_UCR3_RD(x) |  (v)))
#define HW_UART_UCR3_CLR(x, v)    (HW_UART_UCR3_WR(x, HW_UART_UCR3_RD(x) & ~(v)))
#define HW_UART_UCR3_TOG(x, v)    (HW_UART_UCR3_WR(x, HW_UART_UCR3_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UCR3 bitfields
 */

/*! @name Register UART_UCR3, field ACIEN[0] (RW)
 *
 * Autobaud Counter Interrupt Enable. This bit is used to enable the autobaud counter stopped
 * interrupt (triggered with ACST (USR2[11]).
 *
 * Values:
 * - 0 - ACST interrupt disabled
 * - 1 - ACST interrupt enabled
 */
//@{
#define BP_UART_UCR3_ACIEN      (0)      //!< Bit position for UART_UCR3_ACIEN.
#define BM_UART_UCR3_ACIEN      (0x00000001)  //!< Bit mask for UART_UCR3_ACIEN.

//! @brief Get value of UART_UCR3_ACIEN from a register value.
#define BG_UART_UCR3_ACIEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_ACIEN) >> BP_UART_UCR3_ACIEN)

//! @brief Format value for bitfield UART_UCR3_ACIEN.
#define BF_UART_UCR3_ACIEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_ACIEN) & BM_UART_UCR3_ACIEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ACIEN field to a new value.
#define BW_UART_UCR3_ACIEN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_ACIEN) | BF_UART_UCR3_ACIEN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field INVT[1] (RW)
 *
 * Invert TXD output in RS-232/RS-485 mode, set TXD active level in IrDA mode. In RS232/RS-485
 * mode(UMCR[0] = 1), if this bit is set to 1, the TXD output is inverted before transmitted. In
 * IrDA mode , when INVT is cleared, the infrared logic block transmits a positive IR 3/16 pulse for
 * all 0s and 0s are transmitted for 1s. When INVT is set (INVT = 1), the infrared logic block
 * transmits an active low or negative infrared 3/16 pulse for all 0s and 1s are transmitted for 1s.
 *
 * Values:
 * - 0 - TXD is not inverted
 * - 0 - TXD Active low transmission
 * - 1 - TXD is inverted
 * - 1 - TXD Active high transmission
 */
//@{
#define BP_UART_UCR3_INVT      (1)      //!< Bit position for UART_UCR3_INVT.
#define BM_UART_UCR3_INVT      (0x00000002)  //!< Bit mask for UART_UCR3_INVT.

//! @brief Get value of UART_UCR3_INVT from a register value.
#define BG_UART_UCR3_INVT(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_INVT) >> BP_UART_UCR3_INVT)

//! @brief Format value for bitfield UART_UCR3_INVT.
#define BF_UART_UCR3_INVT(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_INVT) & BM_UART_UCR3_INVT)

#ifndef __LANGUAGE_ASM__
//! @brief Set the INVT field to a new value.
#define BW_UART_UCR3_INVT(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_INVT) | BF_UART_UCR3_INVT(v)))
#endif
//@}

/*! @name Register UART_UCR3, field RXDMUXSEL[2] (RW)
 *
 * RXD Muxed Input Selected. Selects proper input pins for serial and Infrared input signal. In this
 * chip, UARTs are used in MUXED mode, so that this bit should always be set.
 */
//@{
#define BP_UART_UCR3_RXDMUXSEL      (2)      //!< Bit position for UART_UCR3_RXDMUXSEL.
#define BM_UART_UCR3_RXDMUXSEL      (0x00000004)  //!< Bit mask for UART_UCR3_RXDMUXSEL.

//! @brief Get value of UART_UCR3_RXDMUXSEL from a register value.
#define BG_UART_UCR3_RXDMUXSEL(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_RXDMUXSEL) >> BP_UART_UCR3_RXDMUXSEL)

//! @brief Format value for bitfield UART_UCR3_RXDMUXSEL.
#define BF_UART_UCR3_RXDMUXSEL(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_RXDMUXSEL) & BM_UART_UCR3_RXDMUXSEL)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXDMUXSEL field to a new value.
#define BW_UART_UCR3_RXDMUXSEL(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_RXDMUXSEL) | BF_UART_UCR3_RXDMUXSEL(v)))
#endif
//@}

/*! @name Register UART_UCR3, field DTRDEN[3] (RW)
 *
 * Data Terminal Ready Delta Enable . Enables / Disables the asynchronous DTRD interrupt. When
 * DTRDEN is asserted and an edge (rising or falling) is detected on DTR (in DCE mode) or on DSR (in
 * DTE mode), then an interrupt is generated.
 *
 * Values:
 * - 0 - Disable DTRD interrupt
 * - 1 - Enable DTRD interrupt
 */
//@{
#define BP_UART_UCR3_DTRDEN      (3)      //!< Bit position for UART_UCR3_DTRDEN.
#define BM_UART_UCR3_DTRDEN      (0x00000008)  //!< Bit mask for UART_UCR3_DTRDEN.

//! @brief Get value of UART_UCR3_DTRDEN from a register value.
#define BG_UART_UCR3_DTRDEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_DTRDEN) >> BP_UART_UCR3_DTRDEN)

//! @brief Format value for bitfield UART_UCR3_DTRDEN.
#define BF_UART_UCR3_DTRDEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_DTRDEN) & BM_UART_UCR3_DTRDEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DTRDEN field to a new value.
#define BW_UART_UCR3_DTRDEN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_DTRDEN) | BF_UART_UCR3_DTRDEN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field AWAKEN[4] (RW)
 *
 * Asynchronous WAKE Interrupt Enable. Controls the asynchronous WAKE interrupt. An interrupt is
 * generated when AWAKEN is asserted and a falling edge is detected on the RXD pin.
 *
 * Values:
 * - 0 - Disable the AWAKE interrupt
 * - 1 - Enable the AWAKE interrupt
 */
//@{
#define BP_UART_UCR3_AWAKEN      (4)      //!< Bit position for UART_UCR3_AWAKEN.
#define BM_UART_UCR3_AWAKEN      (0x00000010)  //!< Bit mask for UART_UCR3_AWAKEN.

//! @brief Get value of UART_UCR3_AWAKEN from a register value.
#define BG_UART_UCR3_AWAKEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_AWAKEN) >> BP_UART_UCR3_AWAKEN)

//! @brief Format value for bitfield UART_UCR3_AWAKEN.
#define BF_UART_UCR3_AWAKEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_AWAKEN) & BM_UART_UCR3_AWAKEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the AWAKEN field to a new value.
#define BW_UART_UCR3_AWAKEN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_AWAKEN) | BF_UART_UCR3_AWAKEN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field AIRINTEN[5] (RW)
 *
 * Asynchronous IR WAKE Interrupt Enable. Controls the asynchronous IR WAKE interrupt. An interrupt
 * is generated when AIRINTEN is asserted and a pulse is detected on the RXD pin.
 *
 * Values:
 * - 0 - Disable the AIRINT interrupt
 * - 1 - Enable the AIRINT interrupt
 */
//@{
#define BP_UART_UCR3_AIRINTEN      (5)      //!< Bit position for UART_UCR3_AIRINTEN.
#define BM_UART_UCR3_AIRINTEN      (0x00000020)  //!< Bit mask for UART_UCR3_AIRINTEN.

//! @brief Get value of UART_UCR3_AIRINTEN from a register value.
#define BG_UART_UCR3_AIRINTEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_AIRINTEN) >> BP_UART_UCR3_AIRINTEN)

//! @brief Format value for bitfield UART_UCR3_AIRINTEN.
#define BF_UART_UCR3_AIRINTEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_AIRINTEN) & BM_UART_UCR3_AIRINTEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the AIRINTEN field to a new value.
#define BW_UART_UCR3_AIRINTEN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_AIRINTEN) | BF_UART_UCR3_AIRINTEN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field RXDSEN[6] (RW)
 *
 * Receive Status Interrupt Enable. Controls the receive status interrupt ( interrupt_uart ). When
 * this bit is enabled and RXDS status bit is set, the interrupt interrupt_uart will be generated.
 *
 * Values:
 * - 0 - Disable the RXDS interrupt
 * - 1 - Enable the RXDS interrupt
 */
//@{
#define BP_UART_UCR3_RXDSEN      (6)      //!< Bit position for UART_UCR3_RXDSEN.
#define BM_UART_UCR3_RXDSEN      (0x00000040)  //!< Bit mask for UART_UCR3_RXDSEN.

//! @brief Get value of UART_UCR3_RXDSEN from a register value.
#define BG_UART_UCR3_RXDSEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_RXDSEN) >> BP_UART_UCR3_RXDSEN)

//! @brief Format value for bitfield UART_UCR3_RXDSEN.
#define BF_UART_UCR3_RXDSEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_RXDSEN) & BM_UART_UCR3_RXDSEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXDSEN field to a new value.
#define BW_UART_UCR3_RXDSEN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_RXDSEN) | BF_UART_UCR3_RXDSEN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field ADNIMP[7] (RW)
 *
 * Autobaud Detection Not Improved-. Disables new features of autobaud detection (See , for more
 * details).
 *
 * Values:
 * - 0 - Autobaud detection new features selected
 * - 1 - Keep old autobaud detection mechanism
 */
//@{
#define BP_UART_UCR3_ADNIMP      (7)      //!< Bit position for UART_UCR3_ADNIMP.
#define BM_UART_UCR3_ADNIMP      (0x00000080)  //!< Bit mask for UART_UCR3_ADNIMP.

//! @brief Get value of UART_UCR3_ADNIMP from a register value.
#define BG_UART_UCR3_ADNIMP(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_ADNIMP) >> BP_UART_UCR3_ADNIMP)

//! @brief Format value for bitfield UART_UCR3_ADNIMP.
#define BF_UART_UCR3_ADNIMP(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_ADNIMP) & BM_UART_UCR3_ADNIMP)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ADNIMP field to a new value.
#define BW_UART_UCR3_ADNIMP(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_ADNIMP) | BF_UART_UCR3_ADNIMP(v)))
#endif
//@}

/*! @name Register UART_UCR3, field RI[8] (RW)
 *
 * Ring Indicator . In DCE mode this bit is used by software to control the RI output pin for the
 * modem interface. In DTE mode, when this bit is set, it will enable the status bit RIDELT (USR2
 * (10)) to cause an interrupt.
 *
 * Values:
 * - 0 - RI pin is logic zero (DCE mode)
 * - 0 - RIDELT interrupt disabled (DTE mode)
 * - 1 - RI pin is logic one (DCE mode)
 * - 1 - RIDELT interrupt enabled (DTE mode)
 */
//@{
#define BP_UART_UCR3_RI      (8)      //!< Bit position for UART_UCR3_RI.
#define BM_UART_UCR3_RI      (0x00000100)  //!< Bit mask for UART_UCR3_RI.

//! @brief Get value of UART_UCR3_RI from a register value.
#define BG_UART_UCR3_RI(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_RI) >> BP_UART_UCR3_RI)

//! @brief Format value for bitfield UART_UCR3_RI.
#define BF_UART_UCR3_RI(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_RI) & BM_UART_UCR3_RI)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RI field to a new value.
#define BW_UART_UCR3_RI(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_RI) | BF_UART_UCR3_RI(v)))
#endif
//@}

/*! @name Register UART_UCR3, field DCD[9] (RW)
 *
 * Data Carrier Detect . In DCE mode this bit is used by software to control the DCD output pin for
 * the modem interface. In DTE mode, when this bit is set, it will enable the status bit DCDDELT
 * (USR2 (6)) to cause an interrupt.
 *
 * Values:
 * - 0 - DCD pin is logic zero (DCE mode)
 * - 0 - DCDDELT interrupt disabled (DTE mode)
 * - 1 - DCD pin is logic one (DCE mode)
 * - 1 - DCDDELT interrupt enabled (DTE mode)
 */
//@{
#define BP_UART_UCR3_DCD      (9)      //!< Bit position for UART_UCR3_DCD.
#define BM_UART_UCR3_DCD      (0x00000200)  //!< Bit mask for UART_UCR3_DCD.

//! @brief Get value of UART_UCR3_DCD from a register value.
#define BG_UART_UCR3_DCD(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_DCD) >> BP_UART_UCR3_DCD)

//! @brief Format value for bitfield UART_UCR3_DCD.
#define BF_UART_UCR3_DCD(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_DCD) & BM_UART_UCR3_DCD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DCD field to a new value.
#define BW_UART_UCR3_DCD(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_DCD) | BF_UART_UCR3_DCD(v)))
#endif
//@}

/*! @name Register UART_UCR3, field DSR[10] (RW)
 *
 * Data Set Ready . This bit is used by software to control the DSR/DTR output pin for the modem
 * interface. In DCE mode it applies to DSR and in DTE mode it applies to DTR .
 *
 * Values:
 * - 0 - DSR/ DTR pin is logic zero
 * - 1 - DSR/ DTR pin is logic one
 */
//@{
#define BP_UART_UCR3_DSR      (10)      //!< Bit position for UART_UCR3_DSR.
#define BM_UART_UCR3_DSR      (0x00000400)  //!< Bit mask for UART_UCR3_DSR.

//! @brief Get value of UART_UCR3_DSR from a register value.
#define BG_UART_UCR3_DSR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_DSR) >> BP_UART_UCR3_DSR)

//! @brief Format value for bitfield UART_UCR3_DSR.
#define BF_UART_UCR3_DSR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_DSR) & BM_UART_UCR3_DSR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DSR field to a new value.
#define BW_UART_UCR3_DSR(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_DSR) | BF_UART_UCR3_DSR(v)))
#endif
//@}

/*! @name Register UART_UCR3, field FRAERREN[11] (RW)
 *
 * Frame Error Interrupt Enable. Enables/Disables the interrupt. When asserted, FRAERREN causes the
 * FRAMERR bit to generate an interrupt.
 *
 * Values:
 * - 0 - Disable the frame error interrupt
 * - 1 - Enable the frame error interrupt
 */
//@{
#define BP_UART_UCR3_FRAERREN      (11)      //!< Bit position for UART_UCR3_FRAERREN.
#define BM_UART_UCR3_FRAERREN      (0x00000800)  //!< Bit mask for UART_UCR3_FRAERREN.

//! @brief Get value of UART_UCR3_FRAERREN from a register value.
#define BG_UART_UCR3_FRAERREN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_FRAERREN) >> BP_UART_UCR3_FRAERREN)

//! @brief Format value for bitfield UART_UCR3_FRAERREN.
#define BF_UART_UCR3_FRAERREN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_FRAERREN) & BM_UART_UCR3_FRAERREN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FRAERREN field to a new value.
#define BW_UART_UCR3_FRAERREN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_FRAERREN) | BF_UART_UCR3_FRAERREN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field PARERREN[12] (RW)
 *
 * Parity Error Interrupt Enable. Enables/Disables the interrupt. When asserted, PARERREN causes the
 * PARITYERR bit to generate an interrupt.
 *
 * Values:
 * - 0 - Disable the parity error interrupt
 * - 1 - Enable the parity error interrupt
 */
//@{
#define BP_UART_UCR3_PARERREN      (12)      //!< Bit position for UART_UCR3_PARERREN.
#define BM_UART_UCR3_PARERREN      (0x00001000)  //!< Bit mask for UART_UCR3_PARERREN.

//! @brief Get value of UART_UCR3_PARERREN from a register value.
#define BG_UART_UCR3_PARERREN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_PARERREN) >> BP_UART_UCR3_PARERREN)

//! @brief Format value for bitfield UART_UCR3_PARERREN.
#define BF_UART_UCR3_PARERREN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_PARERREN) & BM_UART_UCR3_PARERREN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the PARERREN field to a new value.
#define BW_UART_UCR3_PARERREN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_PARERREN) | BF_UART_UCR3_PARERREN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field DTREN[13] (RW)
 *
 * Data Terminal Ready Interrupt Enable . When this bit is set, it will enable the status bit DTRF
 * (USR2 [13]) (DTR/DSR edge sensitive interrupt) to cause an interrupt.
 *
 * Values:
 * - 0 - Data Terminal Ready Interrupt Disabled
 * - 1 - Data Terminal Ready Interrupt Enabled
 */
//@{
#define BP_UART_UCR3_DTREN      (13)      //!< Bit position for UART_UCR3_DTREN.
#define BM_UART_UCR3_DTREN      (0x00002000)  //!< Bit mask for UART_UCR3_DTREN.

//! @brief Get value of UART_UCR3_DTREN from a register value.
#define BG_UART_UCR3_DTREN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_DTREN) >> BP_UART_UCR3_DTREN)

//! @brief Format value for bitfield UART_UCR3_DTREN.
#define BF_UART_UCR3_DTREN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_DTREN) & BM_UART_UCR3_DTREN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DTREN field to a new value.
#define BW_UART_UCR3_DTREN(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_DTREN) | BF_UART_UCR3_DTREN(v)))
#endif
//@}

/*! @name Register UART_UCR3, field DPEC[15:14] (RW)
 *
 * DTR/DSR Interrupt Edge Control . These bits control the edge of DTR (DCE) or DSR (DTE) on which
 * an interrupt will be generated. An interrupt will only be generated if the DTREN bit is set.
 *
 * Values:
 * - 00 - interrupt generated on rising edge
 * - 01 - interrupt generated on falling edge
 * - 1X - interrupt generated on either edge
 */
//@{
#define BP_UART_UCR3_DPEC      (14)      //!< Bit position for UART_UCR3_DPEC.
#define BM_UART_UCR3_DPEC      (0x0000c000)  //!< Bit mask for UART_UCR3_DPEC.

//! @brief Get value of UART_UCR3_DPEC from a register value.
#define BG_UART_UCR3_DPEC(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR3_DPEC) >> BP_UART_UCR3_DPEC)

//! @brief Format value for bitfield UART_UCR3_DPEC.
#define BF_UART_UCR3_DPEC(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR3_DPEC) & BM_UART_UCR3_DPEC)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DPEC field to a new value.
#define BW_UART_UCR3_DPEC(x, v)   (HW_UART_UCR3_WR(x, (HW_UART_UCR3_RD(x) & ~BM_UART_UCR3_DPEC) | BF_UART_UCR3_DPEC(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UCR4 - UART Control Register 4
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UCR4 - UART Control Register 4 (RW)
 *
 * Reset value: 0x00008000
 */
typedef union _hw_uart_ucr4
{
    reg32_t U;
    struct _hw_uart_ucr4_bitfields
    {
        unsigned DREN : 1; //!< [0] Receive Data Ready Interrupt Enable .
        unsigned OREN : 1; //!< [1] Receiver Overrun Interrupt Enable .
        unsigned BKEN : 1; //!< [2] BREAK Condition Detected Interrupt Enable .
        unsigned TCEN : 1; //!< [3] Transmit Complete Interrupt Enable .
        unsigned LPBYP : 1; //!< [4] Low Power Bypass .
        unsigned IRSC : 1; //!< [5] IR Special Case .
        unsigned IDDMAEN : 1; //!< [6] DMA IDLE Condition Detected Interrupt Enable Enables/Disables the receive DMA request dma_req_rx for the IDLE interrupt (triggered with IDLE flag in USR2[12]).
        unsigned WKEN : 1; //!< [7] WAKE Interrupt Enable .
        unsigned ENIRI : 1; //!< [8] Serial Infrared Interrupt Enable .
        unsigned INVR : 1; //!< [9] Invert RXD input in RS-232/RS-485 Mode, d etermine RXD input logic level being sampled in In IrDA mode.
        unsigned CTSTL : 6; //!< [15:10] CTS Trigger Level .
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ucr4_t;
#endif

/*!
 * @name Constants and macros for entire UART_UCR4 register
 */
//@{
#define HW_UART_UCR4_ADDR(x)      (REGS_UART_BASE(x) + 0x8c)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UCR4(x)           (*(volatile hw_uart_ucr4_t *) HW_UART_UCR4_ADDR(x))
#define HW_UART_UCR4_RD(x)        (HW_UART_UCR4(x).U)
#define HW_UART_UCR4_WR(x, v)     (HW_UART_UCR4(x).U = (v))
#define HW_UART_UCR4_SET(x, v)    (HW_UART_UCR4_WR(x, HW_UART_UCR4_RD(x) |  (v)))
#define HW_UART_UCR4_CLR(x, v)    (HW_UART_UCR4_WR(x, HW_UART_UCR4_RD(x) & ~(v)))
#define HW_UART_UCR4_TOG(x, v)    (HW_UART_UCR4_WR(x, HW_UART_UCR4_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UCR4 bitfields
 */

/*! @name Register UART_UCR4, field DREN[0] (RW)
 *
 * Receive Data Ready Interrupt Enable . Enables/Disables the RDR bit to generate an interrupt.
 *
 * Values:
 * - 0 - Disable RDR interrupt
 * - 1 - Enable RDR interrupt
 */
//@{
#define BP_UART_UCR4_DREN      (0)      //!< Bit position for UART_UCR4_DREN.
#define BM_UART_UCR4_DREN      (0x00000001)  //!< Bit mask for UART_UCR4_DREN.

//! @brief Get value of UART_UCR4_DREN from a register value.
#define BG_UART_UCR4_DREN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_DREN) >> BP_UART_UCR4_DREN)

//! @brief Format value for bitfield UART_UCR4_DREN.
#define BF_UART_UCR4_DREN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_DREN) & BM_UART_UCR4_DREN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DREN field to a new value.
#define BW_UART_UCR4_DREN(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_DREN) | BF_UART_UCR4_DREN(v)))
#endif
//@}

/*! @name Register UART_UCR4, field OREN[1] (RW)
 *
 * Receiver Overrun Interrupt Enable . Enables/Disables the ORE bit to generate an interrupt.
 *
 * Values:
 * - 0 - Disable ORE interrupt
 * - 1 - Enable ORE interrupt
 */
//@{
#define BP_UART_UCR4_OREN      (1)      //!< Bit position for UART_UCR4_OREN.
#define BM_UART_UCR4_OREN      (0x00000002)  //!< Bit mask for UART_UCR4_OREN.

//! @brief Get value of UART_UCR4_OREN from a register value.
#define BG_UART_UCR4_OREN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_OREN) >> BP_UART_UCR4_OREN)

//! @brief Format value for bitfield UART_UCR4_OREN.
#define BF_UART_UCR4_OREN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_OREN) & BM_UART_UCR4_OREN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the OREN field to a new value.
#define BW_UART_UCR4_OREN(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_OREN) | BF_UART_UCR4_OREN(v)))
#endif
//@}

/*! @name Register UART_UCR4, field BKEN[2] (RW)
 *
 * BREAK Condition Detected Interrupt Enable . Enables/Disables the BRCD bit to generate an
 * interrupt.
 *
 * Values:
 * - 0 - Disable the BRCD interrupt
 * - 1 - Enable the BRCD interrupt
 */
//@{
#define BP_UART_UCR4_BKEN      (2)      //!< Bit position for UART_UCR4_BKEN.
#define BM_UART_UCR4_BKEN      (0x00000004)  //!< Bit mask for UART_UCR4_BKEN.

//! @brief Get value of UART_UCR4_BKEN from a register value.
#define BG_UART_UCR4_BKEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_BKEN) >> BP_UART_UCR4_BKEN)

//! @brief Format value for bitfield UART_UCR4_BKEN.
#define BF_UART_UCR4_BKEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_BKEN) & BM_UART_UCR4_BKEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the BKEN field to a new value.
#define BW_UART_UCR4_BKEN(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_BKEN) | BF_UART_UCR4_BKEN(v)))
#endif
//@}

/*! @name Register UART_UCR4, field TCEN[3] (RW)
 *
 * Transmit Complete Interrupt Enable . Enables/Disables the TXDC bit to generate an interrupt (
 * interrupt_uart = 0) An interrupt will be issued as long as TCEN and TXDC are high even if the
 * transmitter is not enabled. In general, user should enable the transmitter before enabling the
 * TXDC interrupt.
 *
 * Values:
 * - 0 - Disable TXDC interrupt
 * - 1 - Enable TXDC interrupt
 */
//@{
#define BP_UART_UCR4_TCEN      (3)      //!< Bit position for UART_UCR4_TCEN.
#define BM_UART_UCR4_TCEN      (0x00000008)  //!< Bit mask for UART_UCR4_TCEN.

//! @brief Get value of UART_UCR4_TCEN from a register value.
#define BG_UART_UCR4_TCEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_TCEN) >> BP_UART_UCR4_TCEN)

//! @brief Format value for bitfield UART_UCR4_TCEN.
#define BF_UART_UCR4_TCEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_TCEN) & BM_UART_UCR4_TCEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TCEN field to a new value.
#define BW_UART_UCR4_TCEN(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_TCEN) | BF_UART_UCR4_TCEN(v)))
#endif
//@}

/*! @name Register UART_UCR4, field LPBYP[4] (RW)
 *
 * Low Power Bypass . Allows to bypass the low power new features in UART. To use during debug
 * phase.
 *
 * Values:
 * - 0 - Low power features enabled
 * - 1 - Low power features disabled
 */
//@{
#define BP_UART_UCR4_LPBYP      (4)      //!< Bit position for UART_UCR4_LPBYP.
#define BM_UART_UCR4_LPBYP      (0x00000010)  //!< Bit mask for UART_UCR4_LPBYP.

//! @brief Get value of UART_UCR4_LPBYP from a register value.
#define BG_UART_UCR4_LPBYP(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_LPBYP) >> BP_UART_UCR4_LPBYP)

//! @brief Format value for bitfield UART_UCR4_LPBYP.
#define BF_UART_UCR4_LPBYP(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_LPBYP) & BM_UART_UCR4_LPBYP)

#ifndef __LANGUAGE_ASM__
//! @brief Set the LPBYP field to a new value.
#define BW_UART_UCR4_LPBYP(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_LPBYP) | BF_UART_UCR4_LPBYP(v)))
#endif
//@}

/*! @name Register UART_UCR4, field IRSC[5] (RW)
 *
 * IR Special Case . Selects the clock for the vote logic. When set, IRSC switches the vote logic
 * clock from the sampling clock to the UART reference clock. The IR pulses are counted a
 * predetermined amount of time depending on the reference frequency. See .
 *
 * Values:
 * - 0 - The vote logic uses the sampling clock (16x baud rate) for normal operation
 * - 1 - The vote logic uses the UART reference clock
 */
//@{
#define BP_UART_UCR4_IRSC      (5)      //!< Bit position for UART_UCR4_IRSC.
#define BM_UART_UCR4_IRSC      (0x00000020)  //!< Bit mask for UART_UCR4_IRSC.

//! @brief Get value of UART_UCR4_IRSC from a register value.
#define BG_UART_UCR4_IRSC(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_IRSC) >> BP_UART_UCR4_IRSC)

//! @brief Format value for bitfield UART_UCR4_IRSC.
#define BF_UART_UCR4_IRSC(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_IRSC) & BM_UART_UCR4_IRSC)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IRSC field to a new value.
#define BW_UART_UCR4_IRSC(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_IRSC) | BF_UART_UCR4_IRSC(v)))
#endif
//@}

/*! @name Register UART_UCR4, field IDDMAEN[6] (RW)
 *
 * DMA IDLE Condition Detected Interrupt Enable Enables/Disables the receive DMA request dma_req_rx
 * for the IDLE interrupt (triggered with IDLE flag in USR2[12]).
 *
 * Values:
 * - 0 - DMA IDLE interrupt disabled
 * - 1 - DMA IDLE interrupt enabled
 */
//@{
#define BP_UART_UCR4_IDDMAEN      (6)      //!< Bit position for UART_UCR4_IDDMAEN.
#define BM_UART_UCR4_IDDMAEN      (0x00000040)  //!< Bit mask for UART_UCR4_IDDMAEN.

//! @brief Get value of UART_UCR4_IDDMAEN from a register value.
#define BG_UART_UCR4_IDDMAEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_IDDMAEN) >> BP_UART_UCR4_IDDMAEN)

//! @brief Format value for bitfield UART_UCR4_IDDMAEN.
#define BF_UART_UCR4_IDDMAEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_IDDMAEN) & BM_UART_UCR4_IDDMAEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IDDMAEN field to a new value.
#define BW_UART_UCR4_IDDMAEN(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_IDDMAEN) | BF_UART_UCR4_IDDMAEN(v)))
#endif
//@}

/*! @name Register UART_UCR4, field WKEN[7] (RW)
 *
 * WAKE Interrupt Enable . Enables/Disables the WAKE bit to generate an interrupt. The WAKE bit is
 * set at the detection of a start bit by the receiver.
 *
 * Values:
 * - 0 - Disable the WAKE interrupt
 * - 1 - Enable the WAKE interrupt
 */
//@{
#define BP_UART_UCR4_WKEN      (7)      //!< Bit position for UART_UCR4_WKEN.
#define BM_UART_UCR4_WKEN      (0x00000080)  //!< Bit mask for UART_UCR4_WKEN.

//! @brief Get value of UART_UCR4_WKEN from a register value.
#define BG_UART_UCR4_WKEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_WKEN) >> BP_UART_UCR4_WKEN)

//! @brief Format value for bitfield UART_UCR4_WKEN.
#define BF_UART_UCR4_WKEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_WKEN) & BM_UART_UCR4_WKEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the WKEN field to a new value.
#define BW_UART_UCR4_WKEN(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_WKEN) | BF_UART_UCR4_WKEN(v)))
#endif
//@}

/*! @name Register UART_UCR4, field ENIRI[8] (RW)
 *
 * Serial Infrared Interrupt Enable . Enables/Disables the serial infrared interrupt.
 *
 * Values:
 * - 0 - Serial infrared Interrupt disabled
 * - 1 - Serial infrared Interrupt enabled
 */
//@{
#define BP_UART_UCR4_ENIRI      (8)      //!< Bit position for UART_UCR4_ENIRI.
#define BM_UART_UCR4_ENIRI      (0x00000100)  //!< Bit mask for UART_UCR4_ENIRI.

//! @brief Get value of UART_UCR4_ENIRI from a register value.
#define BG_UART_UCR4_ENIRI(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_ENIRI) >> BP_UART_UCR4_ENIRI)

//! @brief Format value for bitfield UART_UCR4_ENIRI.
#define BF_UART_UCR4_ENIRI(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_ENIRI) & BM_UART_UCR4_ENIRI)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ENIRI field to a new value.
#define BW_UART_UCR4_ENIRI(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_ENIRI) | BF_UART_UCR4_ENIRI(v)))
#endif
//@}

/*! @name Register UART_UCR4, field INVR[9] (RW)
 *
 * Invert RXD input in RS-232/RS-485 Mode, d etermine RXD input logic level being sampled in In IrDA
 * mode. In RS232/RS-485 Mode(UMCR[0] = 1), if this bit is set to 1, the RXD input is inverted
 * before sampled. In IrDA mode ,when cleared, the infrared logic block expects an active low or
 * negative IR 3/16 pulse for 0s and 1s are expected for 1s. When INVR is set (INVR 1), the infrared
 * logic block expects an active high or positive IR 3/16 pulse for 0s and 0s are expected for 1s.
 *
 * Values:
 * - 0 - RXD input is not inverted
 * - 0 - RXD active low detection
 * - 1 - RXD input is inverted
 * - 1 - RXD active high detection
 */
//@{
#define BP_UART_UCR4_INVR      (9)      //!< Bit position for UART_UCR4_INVR.
#define BM_UART_UCR4_INVR      (0x00000200)  //!< Bit mask for UART_UCR4_INVR.

//! @brief Get value of UART_UCR4_INVR from a register value.
#define BG_UART_UCR4_INVR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_INVR) >> BP_UART_UCR4_INVR)

//! @brief Format value for bitfield UART_UCR4_INVR.
#define BF_UART_UCR4_INVR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_INVR) & BM_UART_UCR4_INVR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the INVR field to a new value.
#define BW_UART_UCR4_INVR(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_INVR) | BF_UART_UCR4_INVR(v)))
#endif
//@}

/*! @name Register UART_UCR4, field CTSTL[15:10] (RW)
 *
 * CTS Trigger Level . Controls the threshold at which the CTS pin is deasserted by the RxFIFO.
 * After the trigger level is reached and the CTS pin is deasserted, the RxFIFO continues to receive
 * data until it is full. The CTSTL bits are encoded as shown in the Settings column. Settings 0 to
 * 32 are in use. All other settings are Reserved.
 *
 * Values:
 * - 000000 - 0 characters received
 * - ... - 
 * - ... - 
 * - 000001 - 1 characters in the RxFIFO
 * - 100000 - 32 characters in the RxFIFO (maximum)
 */
//@{
#define BP_UART_UCR4_CTSTL      (10)      //!< Bit position for UART_UCR4_CTSTL.
#define BM_UART_UCR4_CTSTL      (0x0000fc00)  //!< Bit mask for UART_UCR4_CTSTL.

//! @brief Get value of UART_UCR4_CTSTL from a register value.
#define BG_UART_UCR4_CTSTL(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UCR4_CTSTL) >> BP_UART_UCR4_CTSTL)

//! @brief Format value for bitfield UART_UCR4_CTSTL.
#define BF_UART_UCR4_CTSTL(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UCR4_CTSTL) & BM_UART_UCR4_CTSTL)

#ifndef __LANGUAGE_ASM__
//! @brief Set the CTSTL field to a new value.
#define BW_UART_UCR4_CTSTL(x, v)   (HW_UART_UCR4_WR(x, (HW_UART_UCR4_RD(x) & ~BM_UART_UCR4_CTSTL) | BF_UART_UCR4_CTSTL(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UFCR - UART FIFO Control Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UFCR - UART FIFO Control Register (RW)
 *
 * Reset value: 0x00000801
 */
typedef union _hw_uart_ufcr
{
    reg32_t U;
    struct _hw_uart_ufcr_bitfields
    {
        unsigned RXTL : 6; //!< [5:0] Receiver Trigger Level .
        unsigned DCEDTE : 1; //!< [6] DCE/DTE mode select .
        unsigned RFDIV : 3; //!< [9:7] Reference Frequency Divider.
        unsigned TXTL : 6; //!< [15:10] Transmitter Trigger Level .
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ufcr_t;
#endif

/*!
 * @name Constants and macros for entire UART_UFCR register
 */
//@{
#define HW_UART_UFCR_ADDR(x)      (REGS_UART_BASE(x) + 0x90)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UFCR(x)           (*(volatile hw_uart_ufcr_t *) HW_UART_UFCR_ADDR(x))
#define HW_UART_UFCR_RD(x)        (HW_UART_UFCR(x).U)
#define HW_UART_UFCR_WR(x, v)     (HW_UART_UFCR(x).U = (v))
#define HW_UART_UFCR_SET(x, v)    (HW_UART_UFCR_WR(x, HW_UART_UFCR_RD(x) |  (v)))
#define HW_UART_UFCR_CLR(x, v)    (HW_UART_UFCR_WR(x, HW_UART_UFCR_RD(x) & ~(v)))
#define HW_UART_UFCR_TOG(x, v)    (HW_UART_UFCR_WR(x, HW_UART_UFCR_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UFCR bitfields
 */

/*! @name Register UART_UFCR, field RXTL[5:0] (RW)
 *
 * Receiver Trigger Level . Controls the threshold at which a maskable interrupt is generated by the
 * RxFIFO. A maskable interrupt is generated whenever the data level in the RxFIFO reaches the
 * selected threshold. The RXTL bits are encoded as shown in the Settings column. Setting 0 to 32
 * are in use. All other settings are Reserved.
 *
 * Values:
 * - 000000 - 0 characters received
 * - ... - 
 * - ... - 
 * - 000001 - RxFIFO has 1 character
 * - 011111 - RxFIFO has 31 characters
 * - 100000 - RxFIFO has 32 characters (maximum)
 */
//@{
#define BP_UART_UFCR_RXTL      (0)      //!< Bit position for UART_UFCR_RXTL.
#define BM_UART_UFCR_RXTL      (0x0000003f)  //!< Bit mask for UART_UFCR_RXTL.

//! @brief Get value of UART_UFCR_RXTL from a register value.
#define BG_UART_UFCR_RXTL(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UFCR_RXTL) >> BP_UART_UFCR_RXTL)

//! @brief Format value for bitfield UART_UFCR_RXTL.
#define BF_UART_UFCR_RXTL(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UFCR_RXTL) & BM_UART_UFCR_RXTL)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXTL field to a new value.
#define BW_UART_UFCR_RXTL(x, v)   (HW_UART_UFCR_WR(x, (HW_UART_UFCR_RD(x) & ~BM_UART_UFCR_RXTL) | BF_UART_UFCR_RXTL(v)))
#endif
//@}

/*! @name Register UART_UFCR, field DCEDTE[6] (RW)
 *
 * DCE/DTE mode select . Select UART as data communication equipment (DCE mode) or as data terminal
 * equipment (DTE mode).
 *
 * Values:
 * - 0 - DCE mode selected
 * - 1 - DTE mode selected
 */
//@{
#define BP_UART_UFCR_DCEDTE      (6)      //!< Bit position for UART_UFCR_DCEDTE.
#define BM_UART_UFCR_DCEDTE      (0x00000040)  //!< Bit mask for UART_UFCR_DCEDTE.

//! @brief Get value of UART_UFCR_DCEDTE from a register value.
#define BG_UART_UFCR_DCEDTE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UFCR_DCEDTE) >> BP_UART_UFCR_DCEDTE)

//! @brief Format value for bitfield UART_UFCR_DCEDTE.
#define BF_UART_UFCR_DCEDTE(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UFCR_DCEDTE) & BM_UART_UFCR_DCEDTE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DCEDTE field to a new value.
#define BW_UART_UFCR_DCEDTE(x, v)   (HW_UART_UFCR_WR(x, (HW_UART_UFCR_RD(x) & ~BM_UART_UFCR_DCEDTE) | BF_UART_UFCR_DCEDTE(v)))
#endif
//@}

/*! @name Register UART_UFCR, field RFDIV[9:7] (RW)
 *
 * Reference Frequency Divider. Controls the divide ratio for the reference clock. The input clock
 * is module_clock . The output from the divider is ref_clk which is used by BRM to create the 16x
 * baud rate oversampling clock ( brm_clk ).
 *
 * Values:
 * - 000 - Divide input clock by 6
 * - 001 - Divide input clock by 5
 * - 010 - Divide input clock by 4
 * - 011 - Divide input clock by 3
 * - 100 - Divide input clock by 2
 * - 101 - Divide input clock by 1
 * - 110 - Divide input clock by 7
 * - 111 - Reserved
 */
//@{
#define BP_UART_UFCR_RFDIV      (7)      //!< Bit position for UART_UFCR_RFDIV.
#define BM_UART_UFCR_RFDIV      (0x00000380)  //!< Bit mask for UART_UFCR_RFDIV.

//! @brief Get value of UART_UFCR_RFDIV from a register value.
#define BG_UART_UFCR_RFDIV(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UFCR_RFDIV) >> BP_UART_UFCR_RFDIV)

//! @brief Format value for bitfield UART_UFCR_RFDIV.
#define BF_UART_UFCR_RFDIV(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UFCR_RFDIV) & BM_UART_UFCR_RFDIV)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RFDIV field to a new value.
#define BW_UART_UFCR_RFDIV(x, v)   (HW_UART_UFCR_WR(x, (HW_UART_UFCR_RD(x) & ~BM_UART_UFCR_RFDIV) | BF_UART_UFCR_RFDIV(v)))
#endif
//@}

/*! @name Register UART_UFCR, field TXTL[15:10] (RW)
 *
 * Transmitter Trigger Level . Controls the threshold at which a maskable interrupt is generated by
 * the TxFIFO. A maskable interrupt is generated whenever the data level in the TxFIFO falls below
 * the selected threshold. The bits are encoded as shown in the Settings column. Settings 0 to 32
 * are in use. All other settings are Reserved.
 *
 * Values:
 * - 000000 - Reserved
 * - ... - 
 * - ... - 
 * - 000001 - Reserved
 * - 000010 - TxFIFO has 2 or fewer characters
 * - 011111 - TxFIFO has 31 or fewer characters
 * - 100000 - TxFIFO has 32 characters (maximum)
 */
//@{
#define BP_UART_UFCR_TXTL      (10)      //!< Bit position for UART_UFCR_TXTL.
#define BM_UART_UFCR_TXTL      (0x0000fc00)  //!< Bit mask for UART_UFCR_TXTL.

//! @brief Get value of UART_UFCR_TXTL from a register value.
#define BG_UART_UFCR_TXTL(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UFCR_TXTL) >> BP_UART_UFCR_TXTL)

//! @brief Format value for bitfield UART_UFCR_TXTL.
#define BF_UART_UFCR_TXTL(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UFCR_TXTL) & BM_UART_UFCR_TXTL)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TXTL field to a new value.
#define BW_UART_UFCR_TXTL(x, v)   (HW_UART_UFCR_WR(x, (HW_UART_UFCR_RD(x) & ~BM_UART_UFCR_TXTL) | BF_UART_UFCR_TXTL(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_USR1 - UART Status Register 1
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_USR1 - UART Status Register 1 (RW)
 *
 * Reset value: 0x00002040
 */
typedef union _hw_uart_usr1
{
    reg32_t U;
    struct _hw_uart_usr1_bitfields
    {
        unsigned RESERVED0 : 3; //!< [2:0] Reserved
        unsigned SAD : 1; //!< [3] RS-485 Slave Address Detected Interrupt Flag.
        unsigned AWAKE : 1; //!< [4] Asynchronous WAKE Interrupt Flag.
        unsigned AIRINT : 1; //!< [5] Asynchronous IR WAKE Interrupt Flag.
        unsigned RXDS : 1; //!< [6] Receiver IDLE Interrupt Flag.
        unsigned DTRD : 1; //!< [7] DTR Delta.
        unsigned AGTIM : 1; //!< [8] Ageing Timer Interrupt Flag.
        unsigned RRDY : 1; //!< [9] Receiver Ready Interrupt / DMA Flag .
        unsigned FRAMERR : 1; //!< [10] Frame Error Interrupt Flag .
        unsigned ESCF : 1; //!< [11] Escape Sequence Interrupt Flag .
        unsigned RTSD : 1; //!< [12] RTS Delta.
        unsigned TRDY : 1; //!< [13] Transmitter Ready Interrupt / DMA Flag .
        unsigned RTSS : 1; //!< [14] RTS Pin Status .
        unsigned PARITYERR : 1; //!< [15] Parity Error Interrupt Flag .
        unsigned RESERVED1 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_usr1_t;
#endif

/*!
 * @name Constants and macros for entire UART_USR1 register
 */
//@{
#define HW_UART_USR1_ADDR(x)      (REGS_UART_BASE(x) + 0x94)

#ifndef __LANGUAGE_ASM__
#define HW_UART_USR1(x)           (*(volatile hw_uart_usr1_t *) HW_UART_USR1_ADDR(x))
#define HW_UART_USR1_RD(x)        (HW_UART_USR1(x).U)
#define HW_UART_USR1_WR(x, v)     (HW_UART_USR1(x).U = (v))
#define HW_UART_USR1_SET(x, v)    (HW_UART_USR1_WR(x, HW_UART_USR1_RD(x) |  (v)))
#define HW_UART_USR1_CLR(x, v)    (HW_UART_USR1_WR(x, HW_UART_USR1_RD(x) & ~(v)))
#define HW_UART_USR1_TOG(x, v)    (HW_UART_USR1_WR(x, HW_UART_USR1_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_USR1 bitfields
 */

/*! @name Register UART_USR1, field SAD[3] (W1C)
 *
 * RS-485 Slave Address Detected Interrupt Flag. Indicates if RS-485 Slave Address was detected .
 * SAD was asserted in RS-485 mode when the SADEN bit is set and Slave Address is detected in RxFIFO
 * (in Nomal Address Detect Mode, the 9 th data bit = 1; in Automatic Address Detect Mode, the
 * received charater matches the programmed SLADDR).
 *
 * Values:
 * - 0 - No slave address detected
 * - 1 - Slave address detected
 */
//@{
#define BP_UART_USR1_SAD      (3)      //!< Bit position for UART_USR1_SAD.
#define BM_UART_USR1_SAD      (0x00000008)  //!< Bit mask for UART_USR1_SAD.

//! @brief Get value of UART_USR1_SAD from a register value.
#define BG_UART_USR1_SAD(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_SAD) >> BP_UART_USR1_SAD)

//! @brief Format value for bitfield UART_USR1_SAD.
#define BF_UART_USR1_SAD(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_SAD) & BM_UART_USR1_SAD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SAD field to a new value.
#define BW_UART_USR1_SAD(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_SAD) | BF_UART_USR1_SAD(v)))
#endif
//@}

/*! @name Register UART_USR1, field AWAKE[4] (W1C)
 *
 * Asynchronous WAKE Interrupt Flag. Indicates that a falling edge was detected on the RXD pin.
 * Clear AWAKE by writing 1 to it. Writing 0 to AWAKE has no effect.
 *
 * Values:
 * - 0 - No falling edge was detected on the RXD Serial pin
 * - 1 - A falling edge was detected on the RXD Serial pin
 */
//@{
#define BP_UART_USR1_AWAKE      (4)      //!< Bit position for UART_USR1_AWAKE.
#define BM_UART_USR1_AWAKE      (0x00000010)  //!< Bit mask for UART_USR1_AWAKE.

//! @brief Get value of UART_USR1_AWAKE from a register value.
#define BG_UART_USR1_AWAKE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_AWAKE) >> BP_UART_USR1_AWAKE)

//! @brief Format value for bitfield UART_USR1_AWAKE.
#define BF_UART_USR1_AWAKE(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_AWAKE) & BM_UART_USR1_AWAKE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the AWAKE field to a new value.
#define BW_UART_USR1_AWAKE(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_AWAKE) | BF_UART_USR1_AWAKE(v)))
#endif
//@}

/*! @name Register UART_USR1, field AIRINT[5] (W1C)
 *
 * Asynchronous IR WAKE Interrupt Flag. Indicates that the IR WAKE pulse was detected on the RXD
 * pin. Clear AIRINT by writing 1 to it. Writing 0 to AIRINT has no effect.
 *
 * Values:
 * - 0 - No pulse was detected on the RXD IrDA pin
 * - 1 - A pulse was detected on the RXD IrDA pin
 */
//@{
#define BP_UART_USR1_AIRINT      (5)      //!< Bit position for UART_USR1_AIRINT.
#define BM_UART_USR1_AIRINT      (0x00000020)  //!< Bit mask for UART_USR1_AIRINT.

//! @brief Get value of UART_USR1_AIRINT from a register value.
#define BG_UART_USR1_AIRINT(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_AIRINT) >> BP_UART_USR1_AIRINT)

//! @brief Format value for bitfield UART_USR1_AIRINT.
#define BF_UART_USR1_AIRINT(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_AIRINT) & BM_UART_USR1_AIRINT)

#ifndef __LANGUAGE_ASM__
//! @brief Set the AIRINT field to a new value.
#define BW_UART_USR1_AIRINT(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_AIRINT) | BF_UART_USR1_AIRINT(v)))
#endif
//@}

/*! @name Register UART_USR1, field RXDS[6] (RO)
 *
 * Receiver IDLE Interrupt Flag. Indicates that the receiver state machine is in an IDLE state, the
 * next state is IDLE, and the receive pin is high. RXDS is automatically cleared when a character
 * is received. RXDS is active only when the receiver is enabled.
 *
 * Values:
 * - 0 - Receive in progress
 * - 1 - Receiver is IDLE
 */
//@{
#define BP_UART_USR1_RXDS      (6)      //!< Bit position for UART_USR1_RXDS.
#define BM_UART_USR1_RXDS      (0x00000040)  //!< Bit mask for UART_USR1_RXDS.

//! @brief Get value of UART_USR1_RXDS from a register value.
#define BG_UART_USR1_RXDS(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_RXDS) >> BP_UART_USR1_RXDS)
//@}

/*! @name Register UART_USR1, field DTRD[7] (W1C)
 *
 * DTR Delta. Indicates whether DTR (in DCE mode) or DSR (in DTE mode) pins changed state. DTRD
 * generates a maskable interrupt if DTRDEN (UCR3[3]) is set. Clear DTRD by writing 1 to it. Writing
 * 0 to DTRD has no effect.
 *
 * Values:
 * - 0 - DTR (DCE) or DSR (DTE) pin did not change state since last cleared
 * - 1 - DTR (DCE) or DSR (DTE) pin changed state (write 1 to clear)
 */
//@{
#define BP_UART_USR1_DTRD      (7)      //!< Bit position for UART_USR1_DTRD.
#define BM_UART_USR1_DTRD      (0x00000080)  //!< Bit mask for UART_USR1_DTRD.

//! @brief Get value of UART_USR1_DTRD from a register value.
#define BG_UART_USR1_DTRD(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_DTRD) >> BP_UART_USR1_DTRD)

//! @brief Format value for bitfield UART_USR1_DTRD.
#define BF_UART_USR1_DTRD(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_DTRD) & BM_UART_USR1_DTRD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DTRD field to a new value.
#define BW_UART_USR1_DTRD(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_DTRD) | BF_UART_USR1_DTRD(v)))
#endif
//@}

/*! @name Register UART_USR1, field AGTIM[8] (W1C)
 *
 * Ageing Timer Interrupt Flag. Indicates that data in the RxFIFO has been idle for a time of 8
 * character lengths (where a character length consists of 7 or 8 bits, depending on the setting of
 * the WS bit in UCR2, with the bit time corresponding to the baud rate setting) and FIFO data level
 * is less than RxFIFO threshold level (RXTL in the UFCR). Clear by writing a 1 to it.
 *
 * Values:
 * - 0 - AGTIM is not active
 * - 1 - AGTIM is active (write 1 to clear)
 */
//@{
#define BP_UART_USR1_AGTIM      (8)      //!< Bit position for UART_USR1_AGTIM.
#define BM_UART_USR1_AGTIM      (0x00000100)  //!< Bit mask for UART_USR1_AGTIM.

//! @brief Get value of UART_USR1_AGTIM from a register value.
#define BG_UART_USR1_AGTIM(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_AGTIM) >> BP_UART_USR1_AGTIM)

//! @brief Format value for bitfield UART_USR1_AGTIM.
#define BF_UART_USR1_AGTIM(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_AGTIM) & BM_UART_USR1_AGTIM)

#ifndef __LANGUAGE_ASM__
//! @brief Set the AGTIM field to a new value.
#define BW_UART_USR1_AGTIM(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_AGTIM) | BF_UART_USR1_AGTIM(v)))
#endif
//@}

/*! @name Register UART_USR1, field RRDY[9] (RO)
 *
 * Receiver Ready Interrupt / DMA Flag . Indicates that the RxFIFO data level is above the threshold
 * set by the RXTL bits. (See the RXTL bits description in for setting the interrupt threshold.)
 * When asserted, RRDY generates a maskable interrupt or DMA request. RRDY is automatically cleared
 * when data level in the RxFIFO goes below the set threshold level. At reset, RRDY is set to 0.
 *
 * Values:
 * - 0 - No character ready
 * - 1 - Character(s) ready (interrupt posted)
 */
//@{
#define BP_UART_USR1_RRDY      (9)      //!< Bit position for UART_USR1_RRDY.
#define BM_UART_USR1_RRDY      (0x00000200)  //!< Bit mask for UART_USR1_RRDY.

//! @brief Get value of UART_USR1_RRDY from a register value.
#define BG_UART_USR1_RRDY(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_RRDY) >> BP_UART_USR1_RRDY)
//@}

/*! @name Register UART_USR1, field FRAMERR[10] (W1C)
 *
 * Frame Error Interrupt Flag . Indicates that a frame error is detected. The interrupt_uart
 * interrupt will be generated if a frame error is detected and the interrupt is enabled. Clear
 * FRAMERR by writing 1 to it. Writing 0 to FRAMERR has no effect.
 *
 * Values:
 * - 0 - No frame error detected
 * - 1 - Frame error detected (write 1 to clear)
 */
//@{
#define BP_UART_USR1_FRAMERR      (10)      //!< Bit position for UART_USR1_FRAMERR.
#define BM_UART_USR1_FRAMERR      (0x00000400)  //!< Bit mask for UART_USR1_FRAMERR.

//! @brief Get value of UART_USR1_FRAMERR from a register value.
#define BG_UART_USR1_FRAMERR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_FRAMERR) >> BP_UART_USR1_FRAMERR)

//! @brief Format value for bitfield UART_USR1_FRAMERR.
#define BF_UART_USR1_FRAMERR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_FRAMERR) & BM_UART_USR1_FRAMERR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FRAMERR field to a new value.
#define BW_UART_USR1_FRAMERR(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_FRAMERR) | BF_UART_USR1_FRAMERR(v)))
#endif
//@}

/*! @name Register UART_USR1, field ESCF[11] (W1C)
 *
 * Escape Sequence Interrupt Flag . Indicates if an escape sequence was detected. ESCF is asserted
 * when the ESCEN bit is set and an escape sequence is detected in the RxFIFO. Clear ESCF by writing
 * 1 to it. Writing 0 to ESCF has no effect.
 *
 * Values:
 * - 0 - No escape sequence detected
 * - 1 - Escape sequence detected (write 1 to clear).
 */
//@{
#define BP_UART_USR1_ESCF      (11)      //!< Bit position for UART_USR1_ESCF.
#define BM_UART_USR1_ESCF      (0x00000800)  //!< Bit mask for UART_USR1_ESCF.

//! @brief Get value of UART_USR1_ESCF from a register value.
#define BG_UART_USR1_ESCF(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_ESCF) >> BP_UART_USR1_ESCF)

//! @brief Format value for bitfield UART_USR1_ESCF.
#define BF_UART_USR1_ESCF(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_ESCF) & BM_UART_USR1_ESCF)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ESCF field to a new value.
#define BW_UART_USR1_ESCF(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_ESCF) | BF_UART_USR1_ESCF(v)))
#endif
//@}

/*! @name Register UART_USR1, field RTSD[12] (W1C)
 *
 * RTS Delta. Indicates whether the RTS pin changed state. It (RTSD) generates a maskable interrupt.
 * When in STOP mode, RTS assertion sets RTSD and can be used to wake the processor. The current
 * state of the RTS pin is available on the RTSS bit. Clear RTSD by writing 1 to it. Writing 0 to
 * RTSD has no effect. At reset, RTSD is set to 0.
 *
 * Values:
 * - 0 - RTS pin did not change state since last cleared
 * - 1 - RTS pin changed state (write 1 to clear)
 */
//@{
#define BP_UART_USR1_RTSD      (12)      //!< Bit position for UART_USR1_RTSD.
#define BM_UART_USR1_RTSD      (0x00001000)  //!< Bit mask for UART_USR1_RTSD.

//! @brief Get value of UART_USR1_RTSD from a register value.
#define BG_UART_USR1_RTSD(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_RTSD) >> BP_UART_USR1_RTSD)

//! @brief Format value for bitfield UART_USR1_RTSD.
#define BF_UART_USR1_RTSD(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_RTSD) & BM_UART_USR1_RTSD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RTSD field to a new value.
#define BW_UART_USR1_RTSD(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_RTSD) | BF_UART_USR1_RTSD(v)))
#endif
//@}

/*! @name Register UART_USR1, field TRDY[13] (RO)
 *
 * Transmitter Ready Interrupt / DMA Flag . Indicates that the TxFIFO emptied below its target
 * threshold and requires data. TRDY is automatically cleared when the data level in the TxFIFO
 * exceeds the threshold set by TXTL bits. At reset, TRDY is set to 1.
 *
 * Values:
 * - 0 - The transmitter does not require data
 * - 1 - The transmitter requires data (interrupt posted)
 */
//@{
#define BP_UART_USR1_TRDY      (13)      //!< Bit position for UART_USR1_TRDY.
#define BM_UART_USR1_TRDY      (0x00002000)  //!< Bit mask for UART_USR1_TRDY.

//! @brief Get value of UART_USR1_TRDY from a register value.
#define BG_UART_USR1_TRDY(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_TRDY) >> BP_UART_USR1_TRDY)
//@}

/*! @name Register UART_USR1, field RTSS[14] (RO)
 *
 * RTS Pin Status . Indicates the current status of the RTS pin. A "snapshot" of the pin is taken
 * immediately before RTSS is presented to the data bus. RTSS cannot be cleared because all writes
 * to RTSS are ignored. At reset, RTSS is set to 0.
 *
 * Values:
 * - 0 - The RTS pin is high (inactive)
 * - 1 - The RTS pin is low (active)
 */
//@{
#define BP_UART_USR1_RTSS      (14)      //!< Bit position for UART_USR1_RTSS.
#define BM_UART_USR1_RTSS      (0x00004000)  //!< Bit mask for UART_USR1_RTSS.

//! @brief Get value of UART_USR1_RTSS from a register value.
#define BG_UART_USR1_RTSS(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_RTSS) >> BP_UART_USR1_RTSS)
//@}

/*! @name Register UART_USR1, field PARITYERR[15] (W1C)
 *
 * Parity Error Interrupt Flag . Indicates a parity error is detected. PARITYERR is cleared by
 * writing 1 to it. Writing 0 to PARITYERR has no effect. When parity is disabled, PARITYERR always
 * reads 0. At reset, PARITYERR is set to 0.
 *
 * Values:
 * - 0 - No parity error detected
 * - 1 - Parity error detected (write 1 to clear)
 */
//@{
#define BP_UART_USR1_PARITYERR      (15)      //!< Bit position for UART_USR1_PARITYERR.
#define BM_UART_USR1_PARITYERR      (0x00008000)  //!< Bit mask for UART_USR1_PARITYERR.

//! @brief Get value of UART_USR1_PARITYERR from a register value.
#define BG_UART_USR1_PARITYERR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR1_PARITYERR) >> BP_UART_USR1_PARITYERR)

//! @brief Format value for bitfield UART_USR1_PARITYERR.
#define BF_UART_USR1_PARITYERR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR1_PARITYERR) & BM_UART_USR1_PARITYERR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the PARITYERR field to a new value.
#define BW_UART_USR1_PARITYERR(x, v)   (HW_UART_USR1_WR(x, (HW_UART_USR1_RD(x) & ~BM_UART_USR1_PARITYERR) | BF_UART_USR1_PARITYERR(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_USR2 - UART Status Register 2
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_USR2 - UART Status Register 2 (RW)
 *
 * Reset value: 0x00004028
 */
typedef union _hw_uart_usr2
{
    reg32_t U;
    struct _hw_uart_usr2_bitfields
    {
        unsigned RDR : 1; //!< [0] Receive Data Ready -Indicates that at least 1 character is received and written to the RxFIFO.
        unsigned ORE : 1; //!< [1] Overrun Error .
        unsigned BRCD : 1; //!< [2] BREAK Condition Detected .
        unsigned TXDC : 1; //!< [3] Transmitter Complete .
        unsigned RTSF : 1; //!< [4] RTS Edge Triggered Interrupt Flag.
        unsigned DCDIN : 1; //!< [5] Data Carrier Detect Input .
        unsigned DCDDELT : 1; //!< [6] Data Carrier Detect Delta .
        unsigned WAKE : 1; //!< [7] Wake .
        unsigned IRINT : 1; //!< [8] Serial Infrared Interrupt Flag.
        unsigned RIIN : 1; //!< [9] Ring Indicator Input .
        unsigned RIDELT : 1; //!< [10] Ring Indicator Delta .
        unsigned ACST : 1; //!< [11] Autobaud Counter Stopped .
        unsigned IDLE : 1; //!< [12] Idle Condition .
        unsigned DTRF : 1; //!< [13] DTR edge triggered interrupt flag .
        unsigned TXFE : 1; //!< [14] Transmit Buffer FIFO Empty .
        unsigned ADET : 1; //!< [15] Automatic Baud Rate Detect Complete .
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_usr2_t;
#endif

/*!
 * @name Constants and macros for entire UART_USR2 register
 */
//@{
#define HW_UART_USR2_ADDR(x)      (REGS_UART_BASE(x) + 0x98)

#ifndef __LANGUAGE_ASM__
#define HW_UART_USR2(x)           (*(volatile hw_uart_usr2_t *) HW_UART_USR2_ADDR(x))
#define HW_UART_USR2_RD(x)        (HW_UART_USR2(x).U)
#define HW_UART_USR2_WR(x, v)     (HW_UART_USR2(x).U = (v))
#define HW_UART_USR2_SET(x, v)    (HW_UART_USR2_WR(x, HW_UART_USR2_RD(x) |  (v)))
#define HW_UART_USR2_CLR(x, v)    (HW_UART_USR2_WR(x, HW_UART_USR2_RD(x) & ~(v)))
#define HW_UART_USR2_TOG(x, v)    (HW_UART_USR2_WR(x, HW_UART_USR2_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_USR2 bitfields
 */

/*! @name Register UART_USR2, field RDR[0] (RO)
 *
 * Receive Data Ready -Indicates that at least 1 character is received and written to the RxFIFO. If
 * the URXD register is read and there is only 1 character in the RxFIFO, RDR is automatically
 * cleared.
 *
 * Values:
 * - 0 - No receive data ready
 * - 1 - Receive data ready
 */
//@{
#define BP_UART_USR2_RDR      (0)      //!< Bit position for UART_USR2_RDR.
#define BM_UART_USR2_RDR      (0x00000001)  //!< Bit mask for UART_USR2_RDR.

//! @brief Get value of UART_USR2_RDR from a register value.
#define BG_UART_USR2_RDR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_RDR) >> BP_UART_USR2_RDR)
//@}

/*! @name Register UART_USR2, field ORE[1] (W1C)
 *
 * Overrun Error . When set to 1, ORE indicates that the receive buffer (RxFIFO) was full (32 chars
 * inside), and a 33rd character has been fully received. This 33rd character has been discarded.
 * Clear ORE by writing 1 to it. Writing 0 to ORE has no effect.
 *
 * Values:
 * - 0 - No overrun error
 * - 1 - Overrun error (write 1 to clear)
 */
//@{
#define BP_UART_USR2_ORE      (1)      //!< Bit position for UART_USR2_ORE.
#define BM_UART_USR2_ORE      (0x00000002)  //!< Bit mask for UART_USR2_ORE.

//! @brief Get value of UART_USR2_ORE from a register value.
#define BG_UART_USR2_ORE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_ORE) >> BP_UART_USR2_ORE)

//! @brief Format value for bitfield UART_USR2_ORE.
#define BF_UART_USR2_ORE(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_ORE) & BM_UART_USR2_ORE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ORE field to a new value.
#define BW_UART_USR2_ORE(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_ORE) | BF_UART_USR2_ORE(v)))
#endif
//@}

/*! @name Register UART_USR2, field BRCD[2] (W1C)
 *
 * BREAK Condition Detected . Indicates that a BREAK condition was detected by the receiver. Clear
 * BRCD by writing 1 to it. Writing 0 to BRCD has no effect.
 *
 * Values:
 * - 0 - No BREAK condition was detected
 * - 1 - A BREAK condition was detected (write 1 to clear)
 */
//@{
#define BP_UART_USR2_BRCD      (2)      //!< Bit position for UART_USR2_BRCD.
#define BM_UART_USR2_BRCD      (0x00000004)  //!< Bit mask for UART_USR2_BRCD.

//! @brief Get value of UART_USR2_BRCD from a register value.
#define BG_UART_USR2_BRCD(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_BRCD) >> BP_UART_USR2_BRCD)

//! @brief Format value for bitfield UART_USR2_BRCD.
#define BF_UART_USR2_BRCD(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_BRCD) & BM_UART_USR2_BRCD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the BRCD field to a new value.
#define BW_UART_USR2_BRCD(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_BRCD) | BF_UART_USR2_BRCD(v)))
#endif
//@}

/*! @name Register UART_USR2, field TXDC[3] (RO)
 *
 * Transmitter Complete . Indicates that the transmit buffer (TxFIFO) and Shift Register is empty;
 * therefore the transmission is complete. TXDC is cleared automatically when data is written to the
 * TxFIFO.
 *
 * Values:
 * - 0 - Transmit is incomplete
 * - 1 - Transmit is complete
 */
//@{
#define BP_UART_USR2_TXDC      (3)      //!< Bit position for UART_USR2_TXDC.
#define BM_UART_USR2_TXDC      (0x00000008)  //!< Bit mask for UART_USR2_TXDC.

//! @brief Get value of UART_USR2_TXDC from a register value.
#define BG_UART_USR2_TXDC(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_TXDC) >> BP_UART_USR2_TXDC)
//@}

/*! @name Register UART_USR2, field RTSF[4] (W1C)
 *
 * RTS Edge Triggered Interrupt Flag. Indicates if a programmed edge is detected on the RTS pin. The
 * RTEC bits select the edge that generates an interrupt (see ). RTSF can generate an interrupt that
 * can be masked using the RTSEN bit. Clear RTSF by writing 1 to it. Writing 0 to RTSF has no
 * effect.
 *
 * Values:
 * - 0 - Programmed edge not detected on RTS
 * - 1 - Programmed edge detected on RTS (write 1 to clear)
 */
//@{
#define BP_UART_USR2_RTSF      (4)      //!< Bit position for UART_USR2_RTSF.
#define BM_UART_USR2_RTSF      (0x00000010)  //!< Bit mask for UART_USR2_RTSF.

//! @brief Get value of UART_USR2_RTSF from a register value.
#define BG_UART_USR2_RTSF(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_RTSF) >> BP_UART_USR2_RTSF)

//! @brief Format value for bitfield UART_USR2_RTSF.
#define BF_UART_USR2_RTSF(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_RTSF) & BM_UART_USR2_RTSF)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RTSF field to a new value.
#define BW_UART_USR2_RTSF(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_RTSF) | BF_UART_USR2_RTSF(v)))
#endif
//@}

/*! @name Register UART_USR2, field DCDIN[5] (RO)
 *
 * Data Carrier Detect Input . This bit is used in DTE mode reflect the status of the Data Carrier
 * Detect input ( DCD ). The Data Carrier Detect input is used to indicate that a carrier signal has
 * been detected. In DCE mode this bit is always zero.
 *
 * Values:
 * - 0 - Carrier signal Detected
 * - 1 - No Carrier signal Detected
 */
//@{
#define BP_UART_USR2_DCDIN      (5)      //!< Bit position for UART_USR2_DCDIN.
#define BM_UART_USR2_DCDIN      (0x00000020)  //!< Bit mask for UART_USR2_DCDIN.

//! @brief Get value of UART_USR2_DCDIN from a register value.
#define BG_UART_USR2_DCDIN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_DCDIN) >> BP_UART_USR2_DCDIN)
//@}

/*! @name Register UART_USR2, field DCDDELT[6] (W1C)
 *
 * Data Carrier Detect Delta . This bit is used in DTE mode to indicate that the Data Carrier Detect
 * input ( DCD ) has changed state. This flag can cause an interrupt if DCD (UCR3[9]) is enabled.
 * When in STOP mode, this bit can be used to wake the processor. In DCE mode this bit is always
 * zero.
 *
 * Values:
 * - 0 - Data Carrier Detect input has not changed state
 * - 1 - Data Carrier Detect input has changed state (write 1 to clear)
 */
//@{
#define BP_UART_USR2_DCDDELT      (6)      //!< Bit position for UART_USR2_DCDDELT.
#define BM_UART_USR2_DCDDELT      (0x00000040)  //!< Bit mask for UART_USR2_DCDDELT.

//! @brief Get value of UART_USR2_DCDDELT from a register value.
#define BG_UART_USR2_DCDDELT(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_DCDDELT) >> BP_UART_USR2_DCDDELT)

//! @brief Format value for bitfield UART_USR2_DCDDELT.
#define BF_UART_USR2_DCDDELT(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_DCDDELT) & BM_UART_USR2_DCDDELT)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DCDDELT field to a new value.
#define BW_UART_USR2_DCDDELT(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_DCDDELT) | BF_UART_USR2_DCDDELT(v)))
#endif
//@}

/*! @name Register UART_USR2, field WAKE[7] (W1C)
 *
 * Wake . Indicates the start bit is detected. WAKE can generate an interrupt that can be masked
 * using the WKEN bit. Clear WAKE by writing 1 to it. Writing 0 to WAKE has no effect.
 *
 * Values:
 * - 0 - start bit not detected
 * - 1 - start bit detected (write 1 to clear)
 */
//@{
#define BP_UART_USR2_WAKE      (7)      //!< Bit position for UART_USR2_WAKE.
#define BM_UART_USR2_WAKE      (0x00000080)  //!< Bit mask for UART_USR2_WAKE.

//! @brief Get value of UART_USR2_WAKE from a register value.
#define BG_UART_USR2_WAKE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_WAKE) >> BP_UART_USR2_WAKE)

//! @brief Format value for bitfield UART_USR2_WAKE.
#define BF_UART_USR2_WAKE(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_WAKE) & BM_UART_USR2_WAKE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the WAKE field to a new value.
#define BW_UART_USR2_WAKE(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_WAKE) | BF_UART_USR2_WAKE(v)))
#endif
//@}

/*! @name Register UART_USR2, field IRINT[8] (W1C)
 *
 * Serial Infrared Interrupt Flag. When an edge is detected on the RXD pin during SIR Mode, this
 * flag will be asserted. This flag can cause an interrupt which can be masked using the control bit
 * ENIRI: UCR4 [8].
 *
 * Values:
 * - 0 - no edge detected
 * - 1 - valid edge detected (write 1 to clear)
 */
//@{
#define BP_UART_USR2_IRINT      (8)      //!< Bit position for UART_USR2_IRINT.
#define BM_UART_USR2_IRINT      (0x00000100)  //!< Bit mask for UART_USR2_IRINT.

//! @brief Get value of UART_USR2_IRINT from a register value.
#define BG_UART_USR2_IRINT(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_IRINT) >> BP_UART_USR2_IRINT)

//! @brief Format value for bitfield UART_USR2_IRINT.
#define BF_UART_USR2_IRINT(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_IRINT) & BM_UART_USR2_IRINT)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IRINT field to a new value.
#define BW_UART_USR2_IRINT(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_IRINT) | BF_UART_USR2_IRINT(v)))
#endif
//@}

/*! @name Register UART_USR2, field RIIN[9] (RO)
 *
 * Ring Indicator Input . This bit is used in DTE mode to reflect the status if the Ring Indicator
 * input ( RI ). The Ring Indicator input is used to indicate that a ring has occurred. In DCE mode
 * this bit is always zero.
 *
 * Values:
 * - 0 - Ring Detected
 * - 1 - No Ring Detected
 */
//@{
#define BP_UART_USR2_RIIN      (9)      //!< Bit position for UART_USR2_RIIN.
#define BM_UART_USR2_RIIN      (0x00000200)  //!< Bit mask for UART_USR2_RIIN.

//! @brief Get value of UART_USR2_RIIN from a register value.
#define BG_UART_USR2_RIIN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_RIIN) >> BP_UART_USR2_RIIN)
//@}

/*! @name Register UART_USR2, field RIDELT[10] (W1C)
 *
 * Ring Indicator Delta . This bit is used in DTE mode to indicate that the Ring Indicator input (
 * RI ) has changed state. This flag can generate an interrupt if RI (UCR3[8]) is enabled. RIDELT is
 * cleared by writing 1 to it. Writing 0 to RIDELT has no effect.
 *
 * Values:
 * - 0 - Ring Indicator input has not changed state
 * - 1 - Ring Indicator input has changed state (write 1 to clear)
 */
//@{
#define BP_UART_USR2_RIDELT      (10)      //!< Bit position for UART_USR2_RIDELT.
#define BM_UART_USR2_RIDELT      (0x00000400)  //!< Bit mask for UART_USR2_RIDELT.

//! @brief Get value of UART_USR2_RIDELT from a register value.
#define BG_UART_USR2_RIDELT(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_RIDELT) >> BP_UART_USR2_RIDELT)

//! @brief Format value for bitfield UART_USR2_RIDELT.
#define BF_UART_USR2_RIDELT(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_RIDELT) & BM_UART_USR2_RIDELT)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RIDELT field to a new value.
#define BW_UART_USR2_RIDELT(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_RIDELT) | BF_UART_USR2_RIDELT(v)))
#endif
//@}

/*! @name Register UART_USR2, field ACST[11] (W1C)
 *
 * Autobaud Counter Stopped . In autobaud detection (ADBR=1), indicates the counter which determines
 * the baud rate was running and is now stopped. This means either START bit is finished (if
 * ADNIMP=1), or Bit 0 is finished (if ADNIMP=0). See , for more details. An interrupt can be
 * flagged on interrupt_uart if ACIEN=1.
 *
 * Values:
 * - 0 - Measurement of bit length not finished (in autobaud)
 * - 1 - Measurement of bit length finished (in autobaud). (write 1 to clear)
 */
//@{
#define BP_UART_USR2_ACST      (11)      //!< Bit position for UART_USR2_ACST.
#define BM_UART_USR2_ACST      (0x00000800)  //!< Bit mask for UART_USR2_ACST.

//! @brief Get value of UART_USR2_ACST from a register value.
#define BG_UART_USR2_ACST(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_ACST) >> BP_UART_USR2_ACST)

//! @brief Format value for bitfield UART_USR2_ACST.
#define BF_UART_USR2_ACST(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_ACST) & BM_UART_USR2_ACST)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ACST field to a new value.
#define BW_UART_USR2_ACST(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_ACST) | BF_UART_USR2_ACST(v)))
#endif
//@}

/*! @name Register UART_USR2, field IDLE[12] (W1C)
 *
 * Idle Condition . Indicates that an idle condition has existed for more than a programmed amount
 * frame (see . An interrupt can be generated by this IDLE bit if IDEN (UCR1[12]) is enabled. IDLE
 * is cleared by writing 1 to it. Writing 0 to IDLE has no effect.
 *
 * Values:
 * - 0 - No idle condition detected
 * - 1 - Idle condition detected (write 1 to clear)
 */
//@{
#define BP_UART_USR2_IDLE      (12)      //!< Bit position for UART_USR2_IDLE.
#define BM_UART_USR2_IDLE      (0x00001000)  //!< Bit mask for UART_USR2_IDLE.

//! @brief Get value of UART_USR2_IDLE from a register value.
#define BG_UART_USR2_IDLE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_IDLE) >> BP_UART_USR2_IDLE)

//! @brief Format value for bitfield UART_USR2_IDLE.
#define BF_UART_USR2_IDLE(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_IDLE) & BM_UART_USR2_IDLE)

#ifndef __LANGUAGE_ASM__
//! @brief Set the IDLE field to a new value.
#define BW_UART_USR2_IDLE(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_IDLE) | BF_UART_USR2_IDLE(v)))
#endif
//@}

/*! @name Register UART_USR2, field DTRF[13] (W1C)
 *
 * DTR edge triggered interrupt flag . This bit is asserted, when the programmed edge is detected on
 * the DTR pin (DCE mode) or on DSR (DTE mode). This flag can cause an interrupt if DTREN (UCR3[13])
 * is enabled.
 *
 * Values:
 * - 0 - Programmed edge not detected on DTR/DSR
 * - 1 - Programmed edge detected on DTR/DSR (write 1 to clear)
 */
//@{
#define BP_UART_USR2_DTRF      (13)      //!< Bit position for UART_USR2_DTRF.
#define BM_UART_USR2_DTRF      (0x00002000)  //!< Bit mask for UART_USR2_DTRF.

//! @brief Get value of UART_USR2_DTRF from a register value.
#define BG_UART_USR2_DTRF(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_DTRF) >> BP_UART_USR2_DTRF)

//! @brief Format value for bitfield UART_USR2_DTRF.
#define BF_UART_USR2_DTRF(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_DTRF) & BM_UART_USR2_DTRF)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DTRF field to a new value.
#define BW_UART_USR2_DTRF(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_DTRF) | BF_UART_USR2_DTRF(v)))
#endif
//@}

/*! @name Register UART_USR2, field TXFE[14] (RO)
 *
 * Transmit Buffer FIFO Empty . Indicates that the transmit buffer (TxFIFO) is empty. TXFE is
 * cleared automatically when data is written to the TxFIFO. Even though TXFE is high, the
 * transmission might still be in progress.
 *
 * Values:
 * - 0 - The transmit buffer (TxFIFO) is not empty
 * - 1 - The transmit buffer (TxFIFO) is empty
 */
//@{
#define BP_UART_USR2_TXFE      (14)      //!< Bit position for UART_USR2_TXFE.
#define BM_UART_USR2_TXFE      (0x00004000)  //!< Bit mask for UART_USR2_TXFE.

//! @brief Get value of UART_USR2_TXFE from a register value.
#define BG_UART_USR2_TXFE(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_TXFE) >> BP_UART_USR2_TXFE)
//@}

/*! @name Register UART_USR2, field ADET[15] (W1C)
 *
 * Automatic Baud Rate Detect Complete . Indicates that an "A" or "a" was received and that the
 * receiver detected and verified the incoming baud rate. Clear ADET by writing 1 to it. Writing 0
 * to ADET has no effect.
 *
 * Values:
 * - 0 - ASCII "A" or "a" was not received
 * - 1 - ASCII "A" or "a" was received (write 1 to clear)
 */
//@{
#define BP_UART_USR2_ADET      (15)      //!< Bit position for UART_USR2_ADET.
#define BM_UART_USR2_ADET      (0x00008000)  //!< Bit mask for UART_USR2_ADET.

//! @brief Get value of UART_USR2_ADET from a register value.
#define BG_UART_USR2_ADET(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_USR2_ADET) >> BP_UART_USR2_ADET)

//! @brief Format value for bitfield UART_USR2_ADET.
#define BF_UART_USR2_ADET(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_USR2_ADET) & BM_UART_USR2_ADET)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ADET field to a new value.
#define BW_UART_USR2_ADET(x, v)   (HW_UART_USR2_WR(x, (HW_UART_USR2_RD(x) & ~BM_UART_USR2_ADET) | BF_UART_USR2_ADET(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UESC - UART Escape Character Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UESC - UART Escape Character Register (RW)
 *
 * Reset value: 0x0000002b
 */
typedef union _hw_uart_uesc
{
    reg32_t U;
    struct _hw_uart_uesc_bitfields
    {
        unsigned ESC_CHAR : 8; //!< [7:0] UART Escape Character .
        unsigned RESERVED0 : 24; //!< [31:8] Reserved
    } B;
} hw_uart_uesc_t;
#endif

/*!
 * @name Constants and macros for entire UART_UESC register
 */
//@{
#define HW_UART_UESC_ADDR(x)      (REGS_UART_BASE(x) + 0x9c)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UESC(x)           (*(volatile hw_uart_uesc_t *) HW_UART_UESC_ADDR(x))
#define HW_UART_UESC_RD(x)        (HW_UART_UESC(x).U)
#define HW_UART_UESC_WR(x, v)     (HW_UART_UESC(x).U = (v))
#define HW_UART_UESC_SET(x, v)    (HW_UART_UESC_WR(x, HW_UART_UESC_RD(x) |  (v)))
#define HW_UART_UESC_CLR(x, v)    (HW_UART_UESC_WR(x, HW_UART_UESC_RD(x) & ~(v)))
#define HW_UART_UESC_TOG(x, v)    (HW_UART_UESC_WR(x, HW_UART_UESC_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UESC bitfields
 */

/*! @name Register UART_UESC, field ESC_CHAR[7:0] (RW)
 *
 * UART Escape Character . Holds the selected escape character that all received characters are
 * compared against to detect an escape sequence.
 */
//@{
#define BP_UART_UESC_ESC_CHAR      (0)      //!< Bit position for UART_UESC_ESC_CHAR.
#define BM_UART_UESC_ESC_CHAR      (0x000000ff)  //!< Bit mask for UART_UESC_ESC_CHAR.

//! @brief Get value of UART_UESC_ESC_CHAR from a register value.
#define BG_UART_UESC_ESC_CHAR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UESC_ESC_CHAR) >> BP_UART_UESC_ESC_CHAR)

//! @brief Format value for bitfield UART_UESC_ESC_CHAR.
#define BF_UART_UESC_ESC_CHAR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UESC_ESC_CHAR) & BM_UART_UESC_ESC_CHAR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ESC_CHAR field to a new value.
#define BW_UART_UESC_ESC_CHAR(x, v)   (HW_UART_UESC_WR(x, (HW_UART_UESC_RD(x) & ~BM_UART_UESC_ESC_CHAR) | BF_UART_UESC_ESC_CHAR(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UTIM - UART Escape Timer Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UTIM - UART Escape Timer Register (RW)
 *
 * Reset value: 0x00000000
 */
typedef union _hw_uart_utim
{
    reg32_t U;
    struct _hw_uart_utim_bitfields
    {
        unsigned TIM : 12; //!< [11:0] UART Escape Timer.
        unsigned RESERVED0 : 20; //!< [31:12] Reserved
    } B;
} hw_uart_utim_t;
#endif

/*!
 * @name Constants and macros for entire UART_UTIM register
 */
//@{
#define HW_UART_UTIM_ADDR(x)      (REGS_UART_BASE(x) + 0xa0)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UTIM(x)           (*(volatile hw_uart_utim_t *) HW_UART_UTIM_ADDR(x))
#define HW_UART_UTIM_RD(x)        (HW_UART_UTIM(x).U)
#define HW_UART_UTIM_WR(x, v)     (HW_UART_UTIM(x).U = (v))
#define HW_UART_UTIM_SET(x, v)    (HW_UART_UTIM_WR(x, HW_UART_UTIM_RD(x) |  (v)))
#define HW_UART_UTIM_CLR(x, v)    (HW_UART_UTIM_WR(x, HW_UART_UTIM_RD(x) & ~(v)))
#define HW_UART_UTIM_TOG(x, v)    (HW_UART_UTIM_WR(x, HW_UART_UTIM_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UTIM bitfields
 */

/*! @name Register UART_UTIM, field TIM[11:0] (RW)
 *
 * UART Escape Timer. Holds the maximum time interval (in ms) allowed between escape characters. The
 * escape timer register is programmable in intervals of 2 ms. See and for more information on the
 * UART escape sequence detection. Reset value 0x000 = 2 ms up to 0xFFF = 8.192 s.
 */
//@{
#define BP_UART_UTIM_TIM      (0)      //!< Bit position for UART_UTIM_TIM.
#define BM_UART_UTIM_TIM      (0x00000fff)  //!< Bit mask for UART_UTIM_TIM.

//! @brief Get value of UART_UTIM_TIM from a register value.
#define BG_UART_UTIM_TIM(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTIM_TIM) >> BP_UART_UTIM_TIM)

//! @brief Format value for bitfield UART_UTIM_TIM.
#define BF_UART_UTIM_TIM(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTIM_TIM) & BM_UART_UTIM_TIM)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TIM field to a new value.
#define BW_UART_UTIM_TIM(x, v)   (HW_UART_UTIM_WR(x, (HW_UART_UTIM_RD(x) & ~BM_UART_UTIM_TIM) | BF_UART_UTIM_TIM(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UBIR - UART BRM Incremental Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UBIR - UART BRM Incremental Register (RW)
 *
 * Reset value: 0x00000000
 *
 * This register can be written by both software and hardware. When enabling the automatic baud rate
 * detection feature hardware can write 0x000F value into the UBIR after finishing detecting baud
 * rate. Hardware has higher priority when both software and hardware try to write it at the same
 * cycle Note: The write priority in the new design is not same as the original UART. In the orginal
 * design, software has higher priotiry than hardware when writing this register at the same time. .
 * Please note software reset will reset the register to its reset value.
 */
typedef union _hw_uart_ubir
{
    reg32_t U;
    struct _hw_uart_ubir_bitfields
    {
        unsigned INC : 16; //!< [15:0] Incremental Numerator.
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ubir_t;
#endif

/*!
 * @name Constants and macros for entire UART_UBIR register
 */
//@{
#define HW_UART_UBIR_ADDR(x)      (REGS_UART_BASE(x) + 0xa4)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UBIR(x)           (*(volatile hw_uart_ubir_t *) HW_UART_UBIR_ADDR(x))
#define HW_UART_UBIR_RD(x)        (HW_UART_UBIR(x).U)
#define HW_UART_UBIR_WR(x, v)     (HW_UART_UBIR(x).U = (v))
#define HW_UART_UBIR_SET(x, v)    (HW_UART_UBIR_WR(x, HW_UART_UBIR_RD(x) |  (v)))
#define HW_UART_UBIR_CLR(x, v)    (HW_UART_UBIR_WR(x, HW_UART_UBIR_RD(x) & ~(v)))
#define HW_UART_UBIR_TOG(x, v)    (HW_UART_UBIR_WR(x, HW_UART_UBIR_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UBIR bitfields
 */

/*! @name Register UART_UBIR, field INC[15:0] (RW)
 *
 * Incremental Numerator. Holds the numerator value minus one of the BRM ratio (see ). The UBIR
 * register MUST be updated before the UBMR register for the baud rate to be updated correctly. If
 * only one register is written to by software, the BRM will ignore this data until the other
 * register is written to by software. Updating this field using byte accesses is not recommended
 * and is undefined.
 */
//@{
#define BP_UART_UBIR_INC      (0)      //!< Bit position for UART_UBIR_INC.
#define BM_UART_UBIR_INC      (0x0000ffff)  //!< Bit mask for UART_UBIR_INC.

//! @brief Get value of UART_UBIR_INC from a register value.
#define BG_UART_UBIR_INC(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UBIR_INC) >> BP_UART_UBIR_INC)

//! @brief Format value for bitfield UART_UBIR_INC.
#define BF_UART_UBIR_INC(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UBIR_INC) & BM_UART_UBIR_INC)

#ifndef __LANGUAGE_ASM__
//! @brief Set the INC field to a new value.
#define BW_UART_UBIR_INC(x, v)   (HW_UART_UBIR_WR(x, (HW_UART_UBIR_RD(x) & ~BM_UART_UBIR_INC) | BF_UART_UBIR_INC(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UBMR - UART BRM Modulator Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UBMR - UART BRM Modulator Register (RW)
 *
 * Reset value: 0x00000000
 *
 * This register can be written by both software and hardware. When enabling the automatic baud rate
 * detection feature hardware can write a proper value into the UBMR based on detected baud rate.
 * Hardware has higher priority when both software and hardware try to write it at the same cycle
 * Note: The write priority in the new design is not same as the original UART. In the orginal
 * design, software has higher priotiry than hardware when writing this register at the same time. .
 * Please note software reset will reset the register to its reset value.
 */
typedef union _hw_uart_ubmr
{
    reg32_t U;
    struct _hw_uart_ubmr_bitfields
    {
        unsigned MOD : 16; //!< [15:0] Modulator Denominator.
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ubmr_t;
#endif

/*!
 * @name Constants and macros for entire UART_UBMR register
 */
//@{
#define HW_UART_UBMR_ADDR(x)      (REGS_UART_BASE(x) + 0xa8)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UBMR(x)           (*(volatile hw_uart_ubmr_t *) HW_UART_UBMR_ADDR(x))
#define HW_UART_UBMR_RD(x)        (HW_UART_UBMR(x).U)
#define HW_UART_UBMR_WR(x, v)     (HW_UART_UBMR(x).U = (v))
#define HW_UART_UBMR_SET(x, v)    (HW_UART_UBMR_WR(x, HW_UART_UBMR_RD(x) |  (v)))
#define HW_UART_UBMR_CLR(x, v)    (HW_UART_UBMR_WR(x, HW_UART_UBMR_RD(x) & ~(v)))
#define HW_UART_UBMR_TOG(x, v)    (HW_UART_UBMR_WR(x, HW_UART_UBMR_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UBMR bitfields
 */

/*! @name Register UART_UBMR, field MOD[15:0] (RW)
 *
 * Modulator Denominator. Holds the value of the denominator minus one of the BRM ratio (see ). The
 * UBIR register MUST be updated before the UBMR register for the baud rate to be updated correctly.
 * If only one register is written to by software, the BRM will ignore this data until the other
 * register is written to by software. Updating this register using byte accesses is not recommended
 * and undefined.
 */
//@{
#define BP_UART_UBMR_MOD      (0)      //!< Bit position for UART_UBMR_MOD.
#define BM_UART_UBMR_MOD      (0x0000ffff)  //!< Bit mask for UART_UBMR_MOD.

//! @brief Get value of UART_UBMR_MOD from a register value.
#define BG_UART_UBMR_MOD(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UBMR_MOD) >> BP_UART_UBMR_MOD)

//! @brief Format value for bitfield UART_UBMR_MOD.
#define BF_UART_UBMR_MOD(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UBMR_MOD) & BM_UART_UBMR_MOD)

#ifndef __LANGUAGE_ASM__
//! @brief Set the MOD field to a new value.
#define BW_UART_UBMR_MOD(x, v)   (HW_UART_UBMR_WR(x, (HW_UART_UBMR_RD(x) & ~BM_UART_UBMR_MOD) | BF_UART_UBMR_MOD(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UBRC - UART Baud Rate Count Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UBRC - UART Baud Rate Count Register (RO)
 *
 * Reset value: 0x00000004
 */
typedef union _hw_uart_ubrc
{
    reg32_t U;
    struct _hw_uart_ubrc_bitfields
    {
        unsigned BCNT : 16; //!< [15:0] Baud Rate Count Register.
        unsigned RESERVED0 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_ubrc_t;
#endif

/*!
 * @name Constants and macros for entire UART_UBRC register
 */
//@{
#define HW_UART_UBRC_ADDR(x)      (REGS_UART_BASE(x) + 0xac)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UBRC(x)           (*(volatile hw_uart_ubrc_t *) HW_UART_UBRC_ADDR(x))
#define HW_UART_UBRC_RD(x)        (HW_UART_UBRC(x).U)
#endif
//@}

/*
 * constants & macros for individual UART_UBRC bitfields
 */

/*! @name Register UART_UBRC, field BCNT[15:0] (RO)
 *
 * Baud Rate Count Register. This read only register is used to count the start bit of the incoming
 * baud rate (if ADNIMP=1), or start bit + bit0 (if ADNIMP=0). When the measurement is done, the
 * Baud Rate Count Register contains the number of UART internal clock cycles (clock after divider)
 * present in an incoming bit. BCNT retains its value until the next Automatic Baud Rate Detection
 * sequence has been initiated. The 16 bit Baud Rate Count register is reset to 4 and stays at hex
 * FFFF in the case of an overflow.
 */
//@{
#define BP_UART_UBRC_BCNT      (0)      //!< Bit position for UART_UBRC_BCNT.
#define BM_UART_UBRC_BCNT      (0x0000ffff)  //!< Bit mask for UART_UBRC_BCNT.

//! @brief Get value of UART_UBRC_BCNT from a register value.
#define BG_UART_UBRC_BCNT(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UBRC_BCNT) >> BP_UART_UBRC_BCNT)
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_ONEMS - UART One Millisecond Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_ONEMS - UART One Millisecond Register (RW)
 *
 * Reset value: 0x00000000
 *
 * This register has been expanded from 16 bits to 24 bits. In previous versions, the 16-bit ONEMS
 * can only support the maximum 65.535MHz (0xFFFFx1000) ref_clk . To support 4Mbps Bluetooth
 * application with 66.5MHz module_clock , the value 0x103C4 (66.5M/1000) should be written into
 * this register. In this case, the 16 bits are not enough to contain the 0x103C4. So this register
 * was expanded to 24 bits to support high frequency of the ref_clk .
 */
typedef union _hw_uart_onems
{
    reg32_t U;
    struct _hw_uart_onems_bitfields
    {
        unsigned ONEMS : 24; //!< [23:0] One Millisecond Register.
        unsigned RESERVED0 : 8; //!< [31:24] Reserved
    } B;
} hw_uart_onems_t;
#endif

/*!
 * @name Constants and macros for entire UART_ONEMS register
 */
//@{
#define HW_UART_ONEMS_ADDR(x)      (REGS_UART_BASE(x) + 0xb0)

#ifndef __LANGUAGE_ASM__
#define HW_UART_ONEMS(x)           (*(volatile hw_uart_onems_t *) HW_UART_ONEMS_ADDR(x))
#define HW_UART_ONEMS_RD(x)        (HW_UART_ONEMS(x).U)
#define HW_UART_ONEMS_WR(x, v)     (HW_UART_ONEMS(x).U = (v))
#define HW_UART_ONEMS_SET(x, v)    (HW_UART_ONEMS_WR(x, HW_UART_ONEMS_RD(x) |  (v)))
#define HW_UART_ONEMS_CLR(x, v)    (HW_UART_ONEMS_WR(x, HW_UART_ONEMS_RD(x) & ~(v)))
#define HW_UART_ONEMS_TOG(x, v)    (HW_UART_ONEMS_WR(x, HW_UART_ONEMS_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_ONEMS bitfields
 */

/*! @name Register UART_ONEMS, field ONEMS[23:0] (RW)
 *
 * One Millisecond Register. This 24-bit register must contain the value of the UART internal
 * frequency ( ref_clk in ) divided by 1000. The internal frequency is obtained after the UART BRM
 * internal divider (F ( ref_clk ) = F( module_clock ) / RFDIV). In fact this register contains the
 * value corresponding to the number of UART BRM internal clock cycles present in one millisecond.
 * The ONEMS (and UTIM) registers value are used in the escape character detection feature ( ) to
 * count the number of clock cycles left between two escape characters. The ONEMS register is also
 * used in infrared special case mode (IRSC = UCR4[5] = 1'b1), see .
 */
//@{
#define BP_UART_ONEMS_ONEMS      (0)      //!< Bit position for UART_ONEMS_ONEMS.
#define BM_UART_ONEMS_ONEMS      (0x00ffffff)  //!< Bit mask for UART_ONEMS_ONEMS.

//! @brief Get value of UART_ONEMS_ONEMS from a register value.
#define BG_UART_ONEMS_ONEMS(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_ONEMS_ONEMS) >> BP_UART_ONEMS_ONEMS)

//! @brief Format value for bitfield UART_ONEMS_ONEMS.
#define BF_UART_ONEMS_ONEMS(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_ONEMS_ONEMS) & BM_UART_ONEMS_ONEMS)

#ifndef __LANGUAGE_ASM__
//! @brief Set the ONEMS field to a new value.
#define BW_UART_ONEMS_ONEMS(x, v)   (HW_UART_ONEMS_WR(x, (HW_UART_ONEMS_RD(x) & ~BM_UART_ONEMS_ONEMS) | BF_UART_ONEMS_ONEMS(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UTS - UART Test Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UTS - UART Test Register (RW)
 *
 * Reset value: 0x00000060
 */
typedef union _hw_uart_uts
{
    reg32_t U;
    struct _hw_uart_uts_bitfields
    {
        unsigned SOFTRST : 1; //!< [0] Software Reset.
        unsigned RESERVED0 : 2; //!< [2:1] Reserved
        unsigned RXFULL : 1; //!< [3] RxFIFO FULL.
        unsigned TXFULL : 1; //!< [4] TxFIFO FULL.
        unsigned RXEMPTY : 1; //!< [5] RxFIFO Empty.
        unsigned TXEMPTY : 1; //!< [6] TxFIFO Empty.
        unsigned RESERVED1 : 2; //!< [8:7] Reserved
        unsigned RXDBG : 1; //!< [9] 
        unsigned LOOPIR : 1; //!< [10] Loop TX and RX for IR Test (LOOPIR) .
        unsigned DBGEN : 1; //!< [11] 
        unsigned LOOP : 1; //!< [12] Loop TX and RX for Test.
        unsigned FRCPERR : 1; //!< [13] Force Parity Error.
        unsigned RESERVED2 : 18; //!< [31:14] Reserved
    } B;
} hw_uart_uts_t;
#endif

/*!
 * @name Constants and macros for entire UART_UTS register
 */
//@{
#define HW_UART_UTS_ADDR(x)      (REGS_UART_BASE(x) + 0xb4)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UTS(x)           (*(volatile hw_uart_uts_t *) HW_UART_UTS_ADDR(x))
#define HW_UART_UTS_RD(x)        (HW_UART_UTS(x).U)
#define HW_UART_UTS_WR(x, v)     (HW_UART_UTS(x).U = (v))
#define HW_UART_UTS_SET(x, v)    (HW_UART_UTS_WR(x, HW_UART_UTS_RD(x) |  (v)))
#define HW_UART_UTS_CLR(x, v)    (HW_UART_UTS_WR(x, HW_UART_UTS_RD(x) & ~(v)))
#define HW_UART_UTS_TOG(x, v)    (HW_UART_UTS_WR(x, HW_UART_UTS_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UTS bitfields
 */

/*! @name Register UART_UTS, field SOFTRST[0] (RW)
 *
 * Software Reset. Indicates the status of the software reset ( SRST bit of UCR2).
 *
 * Values:
 * - 0 - Software reset inactive
 * - 1 - Software reset active
 */
//@{
#define BP_UART_UTS_SOFTRST      (0)      //!< Bit position for UART_UTS_SOFTRST.
#define BM_UART_UTS_SOFTRST      (0x00000001)  //!< Bit mask for UART_UTS_SOFTRST.

//! @brief Get value of UART_UTS_SOFTRST from a register value.
#define BG_UART_UTS_SOFTRST(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_SOFTRST) >> BP_UART_UTS_SOFTRST)

//! @brief Format value for bitfield UART_UTS_SOFTRST.
#define BF_UART_UTS_SOFTRST(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_SOFTRST) & BM_UART_UTS_SOFTRST)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SOFTRST field to a new value.
#define BW_UART_UTS_SOFTRST(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_SOFTRST) | BF_UART_UTS_SOFTRST(v)))
#endif
//@}

/*! @name Register UART_UTS, field RXFULL[3] (RW)
 *
 * RxFIFO FULL. Indicates the RxFIFO is full.
 *
 * Values:
 * - 0 - The RxFIFO is not full
 * - 1 - The RxFIFO is full
 */
//@{
#define BP_UART_UTS_RXFULL      (3)      //!< Bit position for UART_UTS_RXFULL.
#define BM_UART_UTS_RXFULL      (0x00000008)  //!< Bit mask for UART_UTS_RXFULL.

//! @brief Get value of UART_UTS_RXFULL from a register value.
#define BG_UART_UTS_RXFULL(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_RXFULL) >> BP_UART_UTS_RXFULL)

//! @brief Format value for bitfield UART_UTS_RXFULL.
#define BF_UART_UTS_RXFULL(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_RXFULL) & BM_UART_UTS_RXFULL)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXFULL field to a new value.
#define BW_UART_UTS_RXFULL(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_RXFULL) | BF_UART_UTS_RXFULL(v)))
#endif
//@}

/*! @name Register UART_UTS, field TXFULL[4] (RW)
 *
 * TxFIFO FULL. Indicates the TxFIFO is full.
 *
 * Values:
 * - 0 - The TxFIFO is not full
 * - 1 - The TxFIFO is full
 */
//@{
#define BP_UART_UTS_TXFULL      (4)      //!< Bit position for UART_UTS_TXFULL.
#define BM_UART_UTS_TXFULL      (0x00000010)  //!< Bit mask for UART_UTS_TXFULL.

//! @brief Get value of UART_UTS_TXFULL from a register value.
#define BG_UART_UTS_TXFULL(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_TXFULL) >> BP_UART_UTS_TXFULL)

//! @brief Format value for bitfield UART_UTS_TXFULL.
#define BF_UART_UTS_TXFULL(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_TXFULL) & BM_UART_UTS_TXFULL)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TXFULL field to a new value.
#define BW_UART_UTS_TXFULL(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_TXFULL) | BF_UART_UTS_TXFULL(v)))
#endif
//@}

/*! @name Register UART_UTS, field RXEMPTY[5] (RW)
 *
 * RxFIFO Empty. Indicates the RxFIFO is empty.
 *
 * Values:
 * - 0 - The RxFIFO is not empty
 * - 1 - The RxFIFO is empty
 */
//@{
#define BP_UART_UTS_RXEMPTY      (5)      //!< Bit position for UART_UTS_RXEMPTY.
#define BM_UART_UTS_RXEMPTY      (0x00000020)  //!< Bit mask for UART_UTS_RXEMPTY.

//! @brief Get value of UART_UTS_RXEMPTY from a register value.
#define BG_UART_UTS_RXEMPTY(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_RXEMPTY) >> BP_UART_UTS_RXEMPTY)

//! @brief Format value for bitfield UART_UTS_RXEMPTY.
#define BF_UART_UTS_RXEMPTY(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_RXEMPTY) & BM_UART_UTS_RXEMPTY)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXEMPTY field to a new value.
#define BW_UART_UTS_RXEMPTY(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_RXEMPTY) | BF_UART_UTS_RXEMPTY(v)))
#endif
//@}

/*! @name Register UART_UTS, field TXEMPTY[6] (RW)
 *
 * TxFIFO Empty. Indicates that the TxFIFO is empty.
 *
 * Values:
 * - 0 - The TxFIFO is not empty
 * - 1 - The TxFIFO is empty
 */
//@{
#define BP_UART_UTS_TXEMPTY      (6)      //!< Bit position for UART_UTS_TXEMPTY.
#define BM_UART_UTS_TXEMPTY      (0x00000040)  //!< Bit mask for UART_UTS_TXEMPTY.

//! @brief Get value of UART_UTS_TXEMPTY from a register value.
#define BG_UART_UTS_TXEMPTY(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_TXEMPTY) >> BP_UART_UTS_TXEMPTY)

//! @brief Format value for bitfield UART_UTS_TXEMPTY.
#define BF_UART_UTS_TXEMPTY(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_TXEMPTY) & BM_UART_UTS_TXEMPTY)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TXEMPTY field to a new value.
#define BW_UART_UTS_TXEMPTY(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_TXEMPTY) | BF_UART_UTS_TXEMPTY(v)))
#endif
//@}

/*! @name Register UART_UTS, field RXDBG[9] (RW)
 *
 * RX_fifo_debug_mode. This bit controls the operation of the RX fifo read counter when in debug
 * mode.
 *
 * Values:
 * - 0 - rx fifo read pointer does not increment
 * - 1 - rx_fifo read pointer increments as normal
 */
//@{
#define BP_UART_UTS_RXDBG      (9)      //!< Bit position for UART_UTS_RXDBG.
#define BM_UART_UTS_RXDBG      (0x00000200)  //!< Bit mask for UART_UTS_RXDBG.

//! @brief Get value of UART_UTS_RXDBG from a register value.
#define BG_UART_UTS_RXDBG(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_RXDBG) >> BP_UART_UTS_RXDBG)

//! @brief Format value for bitfield UART_UTS_RXDBG.
#define BF_UART_UTS_RXDBG(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_RXDBG) & BM_UART_UTS_RXDBG)

#ifndef __LANGUAGE_ASM__
//! @brief Set the RXDBG field to a new value.
#define BW_UART_UTS_RXDBG(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_RXDBG) | BF_UART_UTS_RXDBG(v)))
#endif
//@}

/*! @name Register UART_UTS, field LOOPIR[10] (RW)
 *
 * Loop TX and RX for IR Test (LOOPIR) . This bit controls loopback from transmitter to receiver in
 * the InfraRed interface.
 *
 * Values:
 * - 0 - No IR loop
 * - 1 - Connect IR transmitter to IR receiver
 */
//@{
#define BP_UART_UTS_LOOPIR      (10)      //!< Bit position for UART_UTS_LOOPIR.
#define BM_UART_UTS_LOOPIR      (0x00000400)  //!< Bit mask for UART_UTS_LOOPIR.

//! @brief Get value of UART_UTS_LOOPIR from a register value.
#define BG_UART_UTS_LOOPIR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_LOOPIR) >> BP_UART_UTS_LOOPIR)

//! @brief Format value for bitfield UART_UTS_LOOPIR.
#define BF_UART_UTS_LOOPIR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_LOOPIR) & BM_UART_UTS_LOOPIR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the LOOPIR field to a new value.
#define BW_UART_UTS_LOOPIR(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_LOOPIR) | BF_UART_UTS_LOOPIR(v)))
#endif
//@}

/*! @name Register UART_UTS, field DBGEN[11] (RW)
 *
 * debug_enable . This bit controls whether to respond to the debug_req input signal.
 *
 * Values:
 * - 0 - UART will go into debug mode when debug_req is HIGH
 * - 1 - UART will not go into debug mode even if debug_req is HIGH
 */
//@{
#define BP_UART_UTS_DBGEN      (11)      //!< Bit position for UART_UTS_DBGEN.
#define BM_UART_UTS_DBGEN      (0x00000800)  //!< Bit mask for UART_UTS_DBGEN.

//! @brief Get value of UART_UTS_DBGEN from a register value.
#define BG_UART_UTS_DBGEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_DBGEN) >> BP_UART_UTS_DBGEN)

//! @brief Format value for bitfield UART_UTS_DBGEN.
#define BF_UART_UTS_DBGEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_DBGEN) & BM_UART_UTS_DBGEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the DBGEN field to a new value.
#define BW_UART_UTS_DBGEN(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_DBGEN) | BF_UART_UTS_DBGEN(v)))
#endif
//@}

/*! @name Register UART_UTS, field LOOP[12] (RW)
 *
 * Loop TX and RX for Test. Controls loopback for test purposes. When LOOP is high, the receiver
 * input is internally connected to the transmitter and ignores the RXD pin. The transmitter is
 * unaffected by LOOP. If RXDMUXSEL (UCR3[2]) is set to 1, the loopback is applied on serial and
 * IrDA signals. If RXDMUXSEL is set to 0, the loopback is only applied on serial signals.
 *
 * Values:
 * - 0 - Normal receiver operation
 * - 1 - Internally connect the transmitter output to the receiver input
 */
//@{
#define BP_UART_UTS_LOOP      (12)      //!< Bit position for UART_UTS_LOOP.
#define BM_UART_UTS_LOOP      (0x00001000)  //!< Bit mask for UART_UTS_LOOP.

//! @brief Get value of UART_UTS_LOOP from a register value.
#define BG_UART_UTS_LOOP(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_LOOP) >> BP_UART_UTS_LOOP)

//! @brief Format value for bitfield UART_UTS_LOOP.
#define BF_UART_UTS_LOOP(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_LOOP) & BM_UART_UTS_LOOP)

#ifndef __LANGUAGE_ASM__
//! @brief Set the LOOP field to a new value.
#define BW_UART_UTS_LOOP(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_LOOP) | BF_UART_UTS_LOOP(v)))
#endif
//@}

/*! @name Register UART_UTS, field FRCPERR[13] (RW)
 *
 * Force Parity Error. Forces the transmitter to generate a parity error if parity is enabled.
 * FRCPERR is provided for system debugging.
 *
 * Values:
 * - 0 - Generate normal parity
 * - 1 - Generate inverted parity (error)
 */
//@{
#define BP_UART_UTS_FRCPERR      (13)      //!< Bit position for UART_UTS_FRCPERR.
#define BM_UART_UTS_FRCPERR      (0x00002000)  //!< Bit mask for UART_UTS_FRCPERR.

//! @brief Get value of UART_UTS_FRCPERR from a register value.
#define BG_UART_UTS_FRCPERR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UTS_FRCPERR) >> BP_UART_UTS_FRCPERR)

//! @brief Format value for bitfield UART_UTS_FRCPERR.
#define BF_UART_UTS_FRCPERR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UTS_FRCPERR) & BM_UART_UTS_FRCPERR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the FRCPERR field to a new value.
#define BW_UART_UTS_FRCPERR(x, v)   (HW_UART_UTS_WR(x, (HW_UART_UTS_RD(x) & ~BM_UART_UTS_FRCPERR) | BF_UART_UTS_FRCPERR(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// HW_UART_UMCR - UART RS-485 Mode Control Register
//-------------------------------------------------------------------------------------------

#ifndef __LANGUAGE_ASM__
/*!
 * @brief HW_UART_UMCR - UART RS-485 Mode Control Register (RW)
 *
 * Reset value: 0x00000000
 */
typedef union _hw_uart_umcr
{
    reg32_t U;
    struct _hw_uart_umcr_bitfields
    {
        unsigned MDEN : 1; //!< [0] 9-bit data or Multidrop Mode (RS-485) Enable.
        unsigned SLAM : 1; //!< [1] RS-485 Slave Address Detect Mode Selection.
        unsigned TXB8 : 1; //!< [2] Transmit RS-485 bit 8 (the ninth bit or 9 th bit).
        unsigned SADEN : 1; //!< [3] RS-485 Slave Address Detected Interrupt Enable.
        unsigned RESERVED0 : 4; //!< [7:4] Reserved
        unsigned SLADDR : 8; //!< [15:8] RS-485 Slave Address Character.
        unsigned RESERVED1 : 16; //!< [31:16] Reserved
    } B;
} hw_uart_umcr_t;
#endif

/*!
 * @name Constants and macros for entire UART_UMCR register
 */
//@{
#define HW_UART_UMCR_ADDR(x)      (REGS_UART_BASE(x) + 0xb8)

#ifndef __LANGUAGE_ASM__
#define HW_UART_UMCR(x)           (*(volatile hw_uart_umcr_t *) HW_UART_UMCR_ADDR(x))
#define HW_UART_UMCR_RD(x)        (HW_UART_UMCR(x).U)
#define HW_UART_UMCR_WR(x, v)     (HW_UART_UMCR(x).U = (v))
#define HW_UART_UMCR_SET(x, v)    (HW_UART_UMCR_WR(x, HW_UART_UMCR_RD(x) |  (v)))
#define HW_UART_UMCR_CLR(x, v)    (HW_UART_UMCR_WR(x, HW_UART_UMCR_RD(x) & ~(v)))
#define HW_UART_UMCR_TOG(x, v)    (HW_UART_UMCR_WR(x, HW_UART_UMCR_RD(x) ^  (v)))
#endif
//@}

/*
 * constants & macros for individual UART_UMCR bitfields
 */

/*! @name Register UART_UMCR, field MDEN[0] (RW)
 *
 * 9-bit data or Multidrop Mode (RS-485) Enable.
 *
 * Values:
 * - 0 - Normal RS-232 or IrDA mode, see for detail.
 * - 1 - Enable RS-485 mode, see for detail
 */
//@{
#define BP_UART_UMCR_MDEN      (0)      //!< Bit position for UART_UMCR_MDEN.
#define BM_UART_UMCR_MDEN      (0x00000001)  //!< Bit mask for UART_UMCR_MDEN.

//! @brief Get value of UART_UMCR_MDEN from a register value.
#define BG_UART_UMCR_MDEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UMCR_MDEN) >> BP_UART_UMCR_MDEN)

//! @brief Format value for bitfield UART_UMCR_MDEN.
#define BF_UART_UMCR_MDEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UMCR_MDEN) & BM_UART_UMCR_MDEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the MDEN field to a new value.
#define BW_UART_UMCR_MDEN(x, v)   (HW_UART_UMCR_WR(x, (HW_UART_UMCR_RD(x) & ~BM_UART_UMCR_MDEN) | BF_UART_UMCR_MDEN(v)))
#endif
//@}

/*! @name Register UART_UMCR, field SLAM[1] (RW)
 *
 * RS-485 Slave Address Detect Mode Selection.
 *
 * Values:
 * - 0 - Select Normal Address Detect mode
 * - 1 - Select Automatic Address Detect mode
 */
//@{
#define BP_UART_UMCR_SLAM      (1)      //!< Bit position for UART_UMCR_SLAM.
#define BM_UART_UMCR_SLAM      (0x00000002)  //!< Bit mask for UART_UMCR_SLAM.

//! @brief Get value of UART_UMCR_SLAM from a register value.
#define BG_UART_UMCR_SLAM(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UMCR_SLAM) >> BP_UART_UMCR_SLAM)

//! @brief Format value for bitfield UART_UMCR_SLAM.
#define BF_UART_UMCR_SLAM(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UMCR_SLAM) & BM_UART_UMCR_SLAM)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SLAM field to a new value.
#define BW_UART_UMCR_SLAM(x, v)   (HW_UART_UMCR_WR(x, (HW_UART_UMCR_RD(x) & ~BM_UART_UMCR_SLAM) | BF_UART_UMCR_SLAM(v)))
#endif
//@}

/*! @name Register UART_UMCR, field TXB8[2] (RW)
 *
 * Transmit RS-485 bit 8 (the ninth bit or 9 th bit). In RS-485 mode, software writes TXB8 bit as
 * the 9 th data bit to be transmitted.
 *
 * Values:
 * - 0 - 0 will be transmitted as the RS485 9 th data bit
 * - 1 - 1 will be transmitted as the RS485 9 th data bit
 */
//@{
#define BP_UART_UMCR_TXB8      (2)      //!< Bit position for UART_UMCR_TXB8.
#define BM_UART_UMCR_TXB8      (0x00000004)  //!< Bit mask for UART_UMCR_TXB8.

//! @brief Get value of UART_UMCR_TXB8 from a register value.
#define BG_UART_UMCR_TXB8(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UMCR_TXB8) >> BP_UART_UMCR_TXB8)

//! @brief Format value for bitfield UART_UMCR_TXB8.
#define BF_UART_UMCR_TXB8(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UMCR_TXB8) & BM_UART_UMCR_TXB8)

#ifndef __LANGUAGE_ASM__
//! @brief Set the TXB8 field to a new value.
#define BW_UART_UMCR_TXB8(x, v)   (HW_UART_UMCR_WR(x, (HW_UART_UMCR_RD(x) & ~BM_UART_UMCR_TXB8) | BF_UART_UMCR_TXB8(v)))
#endif
//@}

/*! @name Register UART_UMCR, field SADEN[3] (RW)
 *
 * RS-485 Slave Address Detected Interrupt Enable.
 *
 * Values:
 * - 0 - Disable RS-485 Slave Address Detected Interrupt
 * - 1 - Enable RS-485 Slave Address Detected Interrupt
 */
//@{
#define BP_UART_UMCR_SADEN      (3)      //!< Bit position for UART_UMCR_SADEN.
#define BM_UART_UMCR_SADEN      (0x00000008)  //!< Bit mask for UART_UMCR_SADEN.

//! @brief Get value of UART_UMCR_SADEN from a register value.
#define BG_UART_UMCR_SADEN(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UMCR_SADEN) >> BP_UART_UMCR_SADEN)

//! @brief Format value for bitfield UART_UMCR_SADEN.
#define BF_UART_UMCR_SADEN(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UMCR_SADEN) & BM_UART_UMCR_SADEN)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SADEN field to a new value.
#define BW_UART_UMCR_SADEN(x, v)   (HW_UART_UMCR_WR(x, (HW_UART_UMCR_RD(x) & ~BM_UART_UMCR_SADEN) | BF_UART_UMCR_SADEN(v)))
#endif
//@}

/*! @name Register UART_UMCR, field SLADDR[15:8] (RW)
 *
 * RS-485 Slave Address Character. Holds the selected slave adress character that the receiver wil
 * try to detect.
 */
//@{
#define BP_UART_UMCR_SLADDR      (8)      //!< Bit position for UART_UMCR_SLADDR.
#define BM_UART_UMCR_SLADDR      (0x0000ff00)  //!< Bit mask for UART_UMCR_SLADDR.

//! @brief Get value of UART_UMCR_SLADDR from a register value.
#define BG_UART_UMCR_SLADDR(r)   ((__REG_VALUE_TYPE((r), reg32_t) & BM_UART_UMCR_SLADDR) >> BP_UART_UMCR_SLADDR)

//! @brief Format value for bitfield UART_UMCR_SLADDR.
#define BF_UART_UMCR_SLADDR(v)   ((__REG_VALUE_TYPE((v), reg32_t) << BP_UART_UMCR_SLADDR) & BM_UART_UMCR_SLADDR)

#ifndef __LANGUAGE_ASM__
//! @brief Set the SLADDR field to a new value.
#define BW_UART_UMCR_SLADDR(x, v)   (HW_UART_UMCR_WR(x, (HW_UART_UMCR_RD(x) & ~BM_UART_UMCR_SLADDR) | BF_UART_UMCR_SLADDR(v)))
#endif
//@}

//-------------------------------------------------------------------------------------------
// hw_uart_t - module struct
//-------------------------------------------------------------------------------------------
/*!
 * @brief All UART module registers.
 */
#ifndef __LANGUAGE_ASM__
#pragma pack(1)
typedef struct _hw_uart
{
    volatile hw_uart_urxd_t URXD; //!< UART Receiver Register
    reg32_t _reserved0[15];
    volatile hw_uart_utxd_t UTXD; //!< UART Transmitter Register
    reg32_t _reserved1[15];
    volatile hw_uart_ucr1_t UCR1; //!< UART Control Register 1
    volatile hw_uart_ucr2_t UCR2; //!< UART Control Register 2
    volatile hw_uart_ucr3_t UCR3; //!< UART Control Register 3
    volatile hw_uart_ucr4_t UCR4; //!< UART Control Register 4
    volatile hw_uart_ufcr_t UFCR; //!< UART FIFO Control Register
    volatile hw_uart_usr1_t USR1; //!< UART Status Register 1
    volatile hw_uart_usr2_t USR2; //!< UART Status Register 2
    volatile hw_uart_uesc_t UESC; //!< UART Escape Character Register
    volatile hw_uart_utim_t UTIM; //!< UART Escape Timer Register
    volatile hw_uart_ubir_t UBIR; //!< UART BRM Incremental Register
    volatile hw_uart_ubmr_t UBMR; //!< UART BRM Modulator Register
    volatile hw_uart_ubrc_t UBRC; //!< UART Baud Rate Count Register
    volatile hw_uart_onems_t ONEMS; //!< UART One Millisecond Register
    volatile hw_uart_uts_t UTS; //!< UART Test Register
    volatile hw_uart_umcr_t UMCR; //!< UART RS-485 Mode Control Register
} hw_uart_t;
#pragma pack()

//! @brief Macro to access all UART registers.
//! @param x UART instance number.
//! @return Reference (not a pointer) to the registers struct. To get a pointer to the struct,
//!     use the '&' operator, like <code>&HW_UART(0)</code>.
#define HW_UART(x)     (*(hw_uart_t *) REGS_UART_BASE(x))
#endif

#endif // __HW_UART_REGISTERS_H__
// v18/121106/1.2.2
// EOF