Build WAMR vmcore

WAMR vmcore is a set of runtime libraries for loading and running Wasm modules. This document introduces how to build the WAMR vmcore.

References:

how to build iwasm: building different target platforms such as Linux, Windows, Mac etc
Blog: Introduction to WAMR running modes

WAMR vmcore cmake building configurations

By including the script runtime_lib.cmake under folder build-scripts in CMakeList.txt, it is easy to use vmcore to build host software with cmake.

# add this into your CMakeList.txt
include (${WAMR_ROOT_DIR}/build-scripts/runtime_lib.cmake)
add_library(vmlib ${WAMR_RUNTIME_LIB_SOURCE})

The script runtime_lib.cmake defines a number of variables for configuring the WAMR runtime features. You can set these variables in your CMakeList.txt or pass the configurations from cmake command line.

Configure platform and architecture

WAMR_BUILD_PLATFORM: set the target platform. It can be set to any platform name (folder name) under folder core/shared/platform.
WAMR_BUILD_TARGET: set the target CPU architecture. Current supported targets are: X86_64, X86_32, AARCH64, ARM, THUMB, XTENSA, ARC, RISCV32, RISCV64 and MIPS.
- For ARM and THUMB, the format is <arch>[<sub-arch>][_VFP], where <sub-arch> is the ARM sub-architecture and the "_VFP" suffix means using VFP coprocessor registers s0-s15 (d0-d7) for passing arguments or returning results in standard procedure-call. Both <sub-arch> and "_VFP" are optional, e.g. ARMV7, ARMV7_VFP, THUMBV7, THUMBV7_VFP and so on.
- For AARCH64, the format is<arch>[<sub-arch>], VFP is enabled by default. <sub-arch> is optional, e.g. AARCH64, AARCH64V8, AARCH64V8.1 and so on.
- For RISCV64, the format is <arch>[_abi], where "_abi" is optional, currently the supported formats are RISCV64, RISCV64_LP64D and RISCV64_LP64: RISCV64 and RISCV64_LP64D are identical, using LP64D as abi (LP64 with hardware floating-point calling convention for FLEN=64). And RISCV64_LP64 uses LP64 as abi (Integer calling-convention only, and hardware floating-point calling convention is not used).
- For RISCV32, the format is <arch>[_abi], where "_abi" is optional, currently the supported formats are RISCV32, RISCV32_ILP32D and RISCV32_ILP32: RISCV32 and RISCV32_ILP32D are identical, using ILP32D as abi (ILP32 with hardware floating-point calling convention for FLEN=64). And RISCV32_ILP32 uses ILP32 as abi (Integer calling-convention only, and hardware floating-point calling convention is not used).
```
cmake -DWAMR_BUILD_PLATFORM=linux -DWAMR_BUILD_TARGET=ARM
```

Configure interpreters

WAMR_BUILD_INTERP=1/0: enable or disable WASM interpreter
WAMR_BUILD_FAST_INTERP=1/0: build fast (default) or classic WASM interpreter.

NOTE: the fast interpreter runs ~2X faster than classic interpreter, but consumes about 2X memory to hold the pre-compiled code.

Configure AOT and JITs

WAMR_BUILD_AOT=1/0, enable AOT or not, default to enable if not set
WAMR_BUILD_JIT=1/0, enable LLVM JIT or not, default to disable if not set
WAMR_BUILD_FAST_JIT=1/0, enable Fast JIT or not, default to disable if not set
WAMR_BUILD_FAST_JIT=1 and WAMR_BUILD_JIT=1, enable Multi-tier JIT, default to disable if not set

Configure LIBC

WAMR_BUILD_LIBC_BUILTIN=1/0, build the built-in libc subset for WASM app, default to enable if not set
WAMR_BUILD_LIBC_WASI=1/0, build the WASI libc subset for WASM app, default to enable if not set
WAMR_BUILD_LIBC_UVWASI=1/0 (Experiment), build the WASI libc subset for WASM app based on uvwasi implementation, default to disable if not set

Note: for platform which doesn't support WAMR_BUILD_LIBC_WASI, e.g. Windows, developer can try using WAMR_BUILD_LIBC_UVWASI.

Enable Multi-Module feature

WAMR_BUILD_MULTI_MODULE=1/0, default to disable if not set

Enable WASM mini loader

WAMR_BUILD_MINI_LOADER=1/0, default to disable if not set

Note: the mini loader doesn't check the integrity of the WASM binary file, developer must ensure that the WASM file is well-formed.

Enable shared memory feature

WAMR_BUILD_SHARED_MEMORY=1/0, default to disable if not set

Enable bulk memory feature

WAMR_BUILD_BULK_MEMORY=1/0, default to disable if not set

Enable thread manager

WAMR_BUILD_THREAD_MGR=1/0, default to disable if not set

Enable lib-pthread

WAMR_BUILD_LIB_PTHREAD=1/0, default to disable if not set > Note: The dependent feature of lib pthread such as the shared memory and thread manager will be enabled automatically.

Enable lib-pthread-semaphore

WAMR_BUILD_LIB_PTHREAD_SEMAPHORE=1/0, default to disable if not set > Note: This feature depends on lib-pthread, it will be enabled automatically if this feature is enabled.

Enable lib wasi-threads

WAMR_BUILD_LIB_WASI_THREADS=1/0, default to disable if not set > Note: The dependent feature of lib wasi-threads such as the shared memory and thread manager will be enabled automatically.

Enable lib wasi-nn

WAMR_BUILD_WASI_NN=1/0, default to disable if not set

Enable lib wasi-nn GPU mode

WAMR_BUILD_WASI_NN_ENABLE_GPU=1/0, default to disable if not set

Enable lib wasi-nn external delegate mode

WAMR_BUILD_WASI_NN_ENABLE_EXTERNAL_DELEGATE=1/0, default to disable if not set
WAMR_BUILD_WASI_NN_EXTERNAL_DELEGATE_PATH=Path to the external delegate shared library (e.g. libedgetpu.so.1.0 for Coral USB)

Disable boundary check with hardware trap

WAMR_DISABLE_HW_BOUND_CHECK=1/0, default to enable if not set and supported by platform > Note: by default only platform linux/darwin/android/windows/vxworks 64-bit will enable the boundary check with hardware trap feature, for 32-bit platforms it's automatically disabled even when the flag is set to 0, and the wamrc tool will generate AOT code without boundary check instructions in all 64-bit targets except SGX to improve performance. The boundary check includes linear memory access boundary and native stack access boundary, if WAMR_DISABLE_STACK_HW_BOUND_CHECK below isn't set.

Disable native stack boundary check with hardware trap

WAMR_DISABLE_STACK_HW_BOUND_CHECK=1/0, default to enable if not set and supported by platform, same as WAMR_DISABLE_HW_BOUND_CHECK. > Note: When boundary check with hardware trap is disabled, or WAMR_DISABLE_HW_BOUND_CHECK is set to 1, the native stack boundary check with hardware trap will be disabled too, no matter what value is set to WAMR_DISABLE_STACK_HW_BOUND_CHECK. And when boundary check with hardware trap is enabled, the status of this feature is set according to the value of WAMR_DISABLE_STACK_HW_BOUND_CHECK.

Enable tail call feature

WAMR_BUILD_TAIL_CALL=1/0, default to disable if not set

Enable 128-bit SIMD feature

WAMR_BUILD_SIMD=1/0, default to enable if not set > Note: only supported in AOT mode x86-64 target.

Configure Debug

WAMR_BUILD_CUSTOM_NAME_SECTION=1/0, load the function name from custom name section, default to disable if not set

Enable dump call stack feature

WAMR_BUILD_DUMP_CALL_STACK=1/0, default to disable if not set

Note: if it is enabled, the call stack will be dumped when exception occurs.

For interpreter mode, the function names are firstly extracted from custom name section, if this section doesn't exist or the feature is not enabled, then the name will be extracted from the import/export sections

For AOT/JIT mode, the function names are extracted from import/export section, please export as many functions as possible (for wasi-sdk you can use -Wl,--export-all) when compiling wasm module, and add --enable-dump-call-stack option to wamrc during compiling AOT module.

Enable memory profiling (Experiment)

WAMR_BUILD_MEMORY_PROFILING=1/0, default to disable if not set > Note: if it is enabled, developer can use API void wasm_runtime_dump_mem_consumption(wasm_exec_env_t exec_env) to dump the memory consumption info. Currently we only profile the memory consumption of module, module_instance and exec_env, the memory consumed by other components such as wasi-ctx, multi-module and thread-manager are not included.

Enable performance profiling (Experiment)

WAMR_BUILD_PERF_PROFILING=1/0, default to disable if not set > Note: if it is enabled, developer can use API void wasm_runtime_dump_perf_profiling(wasm_module_inst_t module_inst) to dump the performance consumption info. Currently we only profile the performance consumption of each WASM function.

The function name searching sequence is the same with dump call stack feature.

Enable the global heap

WAMR_BUILD_GLOBAL_HEAP_POOL=1/0, default to disable if not set for all iwasm applications, except for the platforms Alios and Zephyr.

WAMR_BUILD_GLOBAL_HEAP_POOL is used in the iwasm applications provided in the directory product-mini. When writing your own host application using WAMR, if you want to use a global heap and allocate memory from it, you must set the initialization argument mem_alloc_type to Alloc_With_Pool. The global heap is defined in the documentation Memory model and memory usage tunning.

Set the global heap size

WAMR_BUILD_GLOBAL_HEAP_SIZE=n, default to 10 MB (10485760) if not set for all iwasm applications, except for the platforms Alios (256 kB), Riot (256 kB) and Zephyr (128 kB).

WAMR_BUILD_GLOBAL_HEAP_SIZE is used in the iwasm applications provided in the directory product-mini. When writing your own host application using WAMR, if you want to set the amount of memory dedicated to the global heap pool, you must set the initialization argument mem_alloc_option.pool with the appropriate values. The global heap is defined in the documentation Memory model and memory usage tunning. Note: if WAMR_BUILD_GLOBAL_HEAP_SIZE is not set and the flag WAMR_BUILD_SPEC_TEST is set, the global heap size is equal to 300 MB (314572800), or 100 MB (104857600) when compiled for Intel SGX (Linux).

Set maximum app thread stack size

WAMR_APP_THREAD_STACK_SIZE_MAX=n, default to 8 MB (8388608) if not set > Note: the AOT boundary check with hardware trap mechanism might consume large stack since the OS may lazily grow the stack mapping as a guard page is hit, we may use this configuration to reduce the total stack usage, e.g. -DWAMR_APP_THREAD_STACK_SIZE_MAX=131072 (128 KB).

WAMR_BH_VPRINTF=, default to disable if not set

Note: if the vprintf_callback function is provided by developer, the os_printf() and os_vprintf() in Linux, Darwin, Windows and VxWorks platforms, besides WASI Libc output will call the callback function instead of libc vprintf() function to redirect the stdout output. For example, developer can define the callback function like below outside runtime lib:

> int my_vprintf(const char *format, va_list ap)
> {
>     /* output to pre-opened file stream */
>     FILE *my_file = ...;
>     return vfprintf(my_file, format, ap);
>     /* or output to pre-opened file descriptor */
>     int my_fd = ...;
>     return vdprintf(my_fd, format, ap);
>     /* or output to string buffer and print the string */
>     char buf[128];
>     vsnprintf(buf, sizeof(buf), format, ap);
>     return my_printf("%s", buf);
> }
> ```
>
> and then use `cmake -DWAMR_BH_VPRINTF=my_vprintf ..` to pass the callback function, or add `BH_VPRINTF=my_vprintf` macro for the compiler, e.g. add line `add_defintions(-DBH_VPRINTF=my_vprintf)` in CMakeListst.txt.

#### **Enable reference types feature**
- **WAMR_BUILD_REF_TYPES**=1/0, default to disable if not set

#### **Exclude WAMR application entry functions**
- **WAMR_DISABLE_APP_ENTRY**=1/0, default to disable if not set

> Note: The WAMR application entry (`core/iwasm/common/wasm_application.c`) encapsulate some common process to instantiate, execute the wasm functions and print the results. Some platform related APIs are used in these functions, so you can enable this flag to exclude this file if your platform doesn't support those APIs.
> *Don't enable this flag if you are building `product-mini`*

#### **Enable source debugging features**
- **WAMR_BUILD_DEBUG_INTERP**=1/0, default to 0 if not set
> Note: There are some other setup required by source debugging, please refer to [source_debugging.md](./source_debugging.md) for more details.

#### **Enable load wasm custom sections**
- **WAMR_BUILD_LOAD_CUSTOM_SECTION**=1/0, default to disable if not set

> Note: By default, the custom sections are ignored. If the embedder wants to get custom sections from `wasm_module_t`, then `WAMR_BUILD_LOAD_CUSTOM_SECTION` should be enabled, and then `wasm_runtime_get_custom_section` can be used to get a custom section by name.

> Note: If `WAMR_BUILD_CUSTOM_NAME_SECTION` is enabled, then the `custom name section` will be treated as a special section and consumed by the runtime, not available to the embedder.

> For AoT file, must use `--emit-custom-sections` to specify which sections need to be emitted into AoT file, otherwise all custom sections (except custom name section) will be ignored.

### **Stack guard size**
- **WAMR_BUILD_STACK_GUARD_SIZE**=n, default to N/A if not set.
> Note: By default, the stack guard size is 1K (1024) or 24K (if uvwasi enabled).

### **Disable the writing linear memory base address to x86 GS segment register
- **WAMR_DISABLE_WRITE_GS_BASE**=1/0, default to enable if not set and supported by platform
> Note: by default only platform [linux x86-64](https://github.com/bytecodealliance/wasm-micro-runtime/blob/5fb5119239220b0803e7045ca49b0a29fe65e70e/core/shared/platform/linux/platform_internal.h#L67) will enable this feature, for 32-bit platforms it's automatically disabled even when the flag is set to 0. In linux x86-64, writing the linear memory base address to x86 GS segment register may be used to speedup the linear memory access for LLVM AOT/JIT, when `--enable-segue=[<flags>]` option is added for `wamrc` or `iwasm`.

### **Enable running PGO(Profile-Guided Optimization) instrumented AOT file**
- **WAMR_BUILD_STATIC_PGO**=1/0, default to disable if not set

**Combination of configurations:**

We can combine the configurations. For example, if we want to disable interpreter, enable AOT and WASI, we can run command:

Bash cmake .. -DWAMR_BUILD_INTERP=0 -DWAMR_BUILD_AOT=1 -DWAMR_BUILD_LIBC_WASI=0 -DWAMR_BUILD_PLATFORM=linux


Or if we want to enable interpreter, disable AOT and WASI, and build as X86_32, we can run command:

Bash cmake .. -DWAMR_BUILD_INTERP=1 -DWAMR_BUILD_AOT=0 -DWAMR_BUILD_LIBC_WASI=0 -DWAMR_BUILD_TARGET=X86_32 ```

build_wamr.md 15 KB 히스토리 Raw