replace speed reconfig with mult

common/usb_hc.h

@@ -85,15 +85,15 @@ uint16_t usbh_get_frame_number(void);
 int usbh_roothub_control(struct usb_setup_packet *setup, uint8_t *buf);
 
 /**
- * @brief reconfig control endpoint pipe.
+ * @brief reconfig endpoint pipe.
  *
  * @param pipe A memory allocated for pipe.
  * @param dev_addr device address.
- * @param ep_mps control endpoint max packet size.
- * @param speed port speed
+ * @param ep_mps endpoint max packet size.
+ * @param mult endpoint additional transcation
  * @return On success will return 0, and others indicate fail.
  */
-int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed);
+int usbh_ep_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t mult);
 
 /**
  * @brief Allocate pipe for endpoint

core/usbh_core.c

@@ -438,7 +438,7 @@ int usbh_enumerate(struct usbh_hubport *hport)
     ep_mps = ((struct usb_device_descriptor *)ep0_request_buffer)->bMaxPacketSize0;
 
     /* Reconfigure EP0 with the correct maximum packet size */
-    usbh_ep0_pipe_reconfigure(hport->ep0, 0, ep_mps, hport->speed);
+    usbh_ep_pipe_reconfigure(hport->ep0, 0, ep_mps, 0);
 
 #ifdef CONFIG_USBHOST_XHCI
     extern int usbh_get_xhci_devaddr(usbh_pipe_t * pipe);
@@ -478,7 +478,7 @@ int usbh_enumerate(struct usbh_hubport *hport)
     hport->dev_addr = dev_addr;
 
     /* And reconfigure EP0 with the correct address */
-    usbh_ep0_pipe_reconfigure(hport->ep0, dev_addr, ep_mps, hport->speed);
+    usbh_ep_pipe_reconfigure(hport->ep0, dev_addr, ep_mps, 0);
 
     /* Read the full device descriptor */
     setup->bmRequestType = USB_REQUEST_DIR_IN | USB_REQUEST_STANDARD | USB_REQUEST_RECIPIENT_DEVICE;

port/ch32/usb_hc_usbfs.c

@@ -607,23 +607,12 @@ int usbh_roothub_control(struct usb_setup_packet *setup, uint8_t *buf)
     return 0;
 }
 
-int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed)
+int usbh_ep_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t mult)
 {
     struct chusb_pipe *ppipe = (struct chusb_pipe *)pipe;
 
     ppipe->dev_addr = dev_addr;
     ppipe->ep_mps = ep_mps;
-    ppipe->speed = speed;
-
-    if (speed == USB_SPEED_HIGH) {
-        USB_LOG_INFO("ep0 reconfigure USB_SPEED_HIGH \r\n");
-    } else if (speed == USB_SPEED_FULL) {
-        USB_LOG_INFO("ep0 reconfigure USB_SPEED_FULL \r\n");
-        chusbh_set_self_speed(USB_SPEED_FULL);
-    } else if (speed == USB_SPEED_LOW) {
-        USB_LOG_INFO("ep0 reconfigure USB_SPEED_LOW \r\n");
-        chusbh_set_self_speed(USB_SPEED_LOW);
-    }
 
     USBFS_HOST->DEV_ADDR = (USBFS_DEV_ADDR_OFFSET & USBFS_UDA_GP_BIT) | (dev_addr & USBFS_USB_ADDR_MASK);
     return 0;
@@ -661,6 +650,15 @@ int usbh_pipe_alloc(usbh_pipe_t *pipe, const struct usbh_endpoint_cfg *ep_cfg)
     ppipe->hport = ep_cfg->hport;
 
     if (ep_cfg->ep_type == USB_ENDPOINT_TYPE_CONTROL) {
+        if (ppipe->speed == USB_SPEED_HIGH) {
+            USB_LOG_INFO("ep0 reconfigure USB_SPEED_HIGH \r\n");
+        } else if (ppipe->speed == USB_SPEED_FULL) {
+            USB_LOG_INFO("ep0 reconfigure USB_SPEED_FULL \r\n");
+            chusbh_set_self_speed(USB_SPEED_FULL);
+        } else if (ppipe->speed == USB_SPEED_LOW) {
+            USB_LOG_INFO("ep0 reconfigure USB_SPEED_LOW \r\n");
+            chusbh_set_self_speed(USB_SPEED_LOW);
+        }
     } else {
         if (ppipe->speed == USB_SPEED_HIGH) {
         } else if (ppipe->speed == USB_SPEED_FULL) {
@@ -842,7 +840,7 @@ static int8_t chusb_outpipe_irq_handler(uint8_t res_state)
             } else {
                 if (g_chusb_hcd.prv_set_zero == true) {
                     /**
-                     * It is unlikely to run here, 
+                     * It is unlikely to run here,
                      * because the device can probably receive 0 length byte packets
                      */
                     urb->errorcode = 0;
@@ -1121,7 +1119,7 @@ static int8_t chusb_inpipe_irq_handler(uint8_t res_state)
                     /*!< Ctrol endpoint */
                     /**
                      * Status stage
-                     * 
+                     *
                      * Setup ---> out data ---> in status stage
                      */
                     if ((g_chusb_hcd.ep0_state == USB_EP0_STATE_IN_STATUS) && (rx_len == 0)) {
@@ -1252,37 +1250,37 @@ void USBH_IRQHandler(void)
         }
     } else if (intflag & USBFS_UIF_DETECT) {
         if (USBFS_HOST->MIS_ST & USBFS_UMS_DEV_ATTACH) {
-                USB_LOG_INFO("Dev connect \r\n");
-                g_chusb_hcd.port_csc = 1;
-                g_chusb_hcd.port_pec = 1;
-                g_chusb_hcd.port_pe = 1;
-                usbh_roothub_thread_wakeup(1);
+            USB_LOG_INFO("Dev connect \r\n");
+            g_chusb_hcd.port_csc = 1;
+            g_chusb_hcd.port_pec = 1;
+            g_chusb_hcd.port_pe = 1;
+            usbh_roothub_thread_wakeup(1);
         } else {
-                USB_LOG_INFO("Dev remove \r\n");
-                /**
+            USB_LOG_INFO("Dev remove \r\n");
+            /**
                  * Device remove
                  * Disable port and stop send sof
                  */
-                USBFS_HOST->HOST_SETUP &= ~USBFS_UH_SOF_EN;
-                USBFS_HOST->HOST_CTRL &= ~USBFS_UH_PORT_EN;
-                if (g_chusb_hcd.main_pipe_using) {
-                    g_chusb_hcd.main_pipe_using = false;
-                }
-                g_chusb_hcd.port_csc = 1;
-                g_chusb_hcd.port_pec = 1;
-                g_chusb_hcd.port_pe = 0;
-                for (uint8_t index = 0; index < CONFIG_USBHOST_PIPE_NUM; index++) {
-                    for (uint8_t j = 0; j < 2; j++) {
-                        struct chusb_pipe *pipe = &g_chusb_hcd.pipe_pool[index][j];
-                        struct usbh_urb *urb = pipe->urb;
-                        if (pipe->waiter) {
-                            pipe->waiter = false;
-                            urb->errorcode = -ESHUTDOWN;
-                            usb_osal_sem_give(pipe->waitsem);
-                        }
+            USBFS_HOST->HOST_SETUP &= ~USBFS_UH_SOF_EN;
+            USBFS_HOST->HOST_CTRL &= ~USBFS_UH_PORT_EN;
+            if (g_chusb_hcd.main_pipe_using) {
+                g_chusb_hcd.main_pipe_using = false;
+            }
+            g_chusb_hcd.port_csc = 1;
+            g_chusb_hcd.port_pec = 1;
+            g_chusb_hcd.port_pe = 0;
+            for (uint8_t index = 0; index < CONFIG_USBHOST_PIPE_NUM; index++) {
+                for (uint8_t j = 0; j < 2; j++) {
+                    struct chusb_pipe *pipe = &g_chusb_hcd.pipe_pool[index][j];
+                    struct usbh_urb *urb = pipe->urb;
+                    if (pipe->waiter) {
+                        pipe->waiter = false;
+                        urb->errorcode = -ESHUTDOWN;
+                        usb_osal_sem_give(pipe->waitsem);
                     }
                 }
-                usbh_roothub_thread_wakeup(1);
+            }
+            usbh_roothub_thread_wakeup(1);
         }
         USBFS_HOST->INT_FG = USBFS_UIF_DETECT;
     } else {
@@ -1293,8 +1291,8 @@ void USBH_IRQHandler(void)
     return;
 pipe_wait:
     /**
-     * enerally, only errors can arrive here. 
-     * After testing, most cases arrive here because of the problem of the DATA PID, 
+     * enerally, only errors can arrive here.
+     * After testing, most cases arrive here because of the problem of the DATA PID,
      * but the transmission will be completed correctly next time.
      */
     chusb_pipe_waitup(g_chusb_hcd.current_pipe, true);

port/ch32/usb_hc_usbhs.c

@@ -669,24 +669,13 @@ int usbh_roothub_control(struct usb_setup_packet *setup, uint8_t *buf)
     return 0;
 }
 
-int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed)
+int usbh_ep_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed)
 {
     struct chusb_pipe *ppipe = (struct chusb_pipe *)pipe;
 
     ppipe->dev_addr = dev_addr;
     ppipe->ep_mps = ep_mps;
-    ppipe->speed = speed;
 
-    if (speed == USB_SPEED_HIGH) {
-        USB_LOG_INFO("ep0 reconfigure USB_SPEED_HIGH \r\n");
-        chusbh_set_self_speed(USB_SPEED_HIGH);
-    } else if (speed == USB_SPEED_FULL) {
-        USB_LOG_INFO("ep0 reconfigure USB_SPEED_FULL \r\n");
-        chusbh_set_self_speed(USB_SPEED_FULL);
-    } else if (speed == USB_SPEED_LOW) {
-        USB_LOG_INFO("ep0 reconfigure USB_SPEED_LOW \r\n");
-        chusbh_set_self_speed(USB_SPEED_LOW);
-    }
     USBHS_HOST->DEV_AD = dev_addr & 0x7f;
     return 0;
 }
@@ -723,6 +712,16 @@ int usbh_pipe_alloc(usbh_pipe_t *pipe, const struct usbh_endpoint_cfg *ep_cfg)
     ppipe->hport = ep_cfg->hport;
 
     if (ep_cfg->ep_type == USB_ENDPOINT_TYPE_CONTROL) {
+        if (ppipe->speed == USB_SPEED_HIGH) {
+            USB_LOG_INFO("ep0 reconfigure USB_SPEED_HIGH \r\n");
+            chusbh_set_self_speed(USB_SPEED_HIGH);
+        } else if (ppipe->speed == USB_SPEED_FULL) {
+            USB_LOG_INFO("ep0 reconfigure USB_SPEED_FULL \r\n");
+            chusbh_set_self_speed(USB_SPEED_FULL);
+        } else if (ppipe->speed == USB_SPEED_LOW) {
+            USB_LOG_INFO("ep0 reconfigure USB_SPEED_LOW \r\n");
+            chusbh_set_self_speed(USB_SPEED_LOW);
+        }
     } else {
         if (ppipe->speed == USB_SPEED_HIGH) {
             if ((ep_cfg->ep_type == USB_ENDPOINT_TYPE_ISOCHRONOUS) ||
@@ -914,7 +913,7 @@ static int8_t chusb_outpipe_irq_handler(uint8_t res_state)
                 urb->errorcode = 0;
                 if (g_chusb_hcd.prv_set_zero == true) {
                     /**
-                     * It is unlikely to run here, 
+                     * It is unlikely to run here,
                      * because the device can probably receive 0 length byte packets
                      */
                     g_chusb_hcd.prv_set_zero = false;
@@ -1172,7 +1171,7 @@ static int8_t chusb_inpipe_irq_handler(uint8_t res_state)
                     /*!< Ctrol endpoint */
                     /**
                      * Status stage
-                     * 
+                     *
                      * Setup ---> out data ---> in status stage
                      */
                     if ((g_chusb_hcd.ep0_state == USB_EP0_STATE_IN_STATUS) && (rx_len == 0)) {

port/dwc2/usb_hc_dwc2.c

@@ -676,7 +676,7 @@ int usbh_roothub_control(struct usb_setup_packet *setup, uint8_t *buf)
     return 0;
 }
 
-int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed)
+int usbh_ep_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t mult)
 {
     struct dwc2_pipe *chan;
 
@@ -684,7 +684,6 @@ int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps
 
     chan->dev_addr = dev_addr;
     chan->ep_mps = ep_mps;
-    chan->speed = speed;
 
     return 0;
 }

port/ehci/usb_hc_ehci.c

@@ -959,13 +959,13 @@ int usbh_roothub_control(struct usb_setup_packet *setup, uint8_t *buf)
     return 0;
 }
 
-int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed)
+int usbh_ep_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t mult)
 {
     struct ehci_pipe *ppipe = (struct ehci_pipe *)pipe;
 
     ppipe->dev_addr = dev_addr;
     ppipe->ep_mps = ep_mps;
-    ppipe->speed = speed;
+    ppipe->mult = mult;
 
     return 0;
 }

port/musb/usb_hc_musb.c

@@ -551,21 +551,13 @@ int usbh_roothub_control(struct usb_setup_packet *setup, uint8_t *buf)
     return 0;
 }
 
-int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed)
+int usbh_ep_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t mult)
 {
     struct musb_pipe *ppipe = (struct musb_pipe *)pipe;
 
     ppipe->dev_addr = dev_addr;
     ppipe->ep_mps = ep_mps;
 
-    if (speed == USB_SPEED_HIGH) {
-        ppipe->speed = USB_TYPE0_SPEED_HIGH;
-    } else if (speed == USB_SPEED_FULL) {
-        ppipe->speed = USB_TYPE0_SPEED_FULL;
-    } else if (speed == USB_SPEED_LOW) {
-        ppipe->speed = USB_TYPE0_SPEED_LOW;
-    }
-
     return 0;
 }
 
@@ -605,6 +597,13 @@ int usbh_pipe_alloc(usbh_pipe_t *pipe, const struct usbh_endpoint_cfg *ep_cfg)
     ppipe->hport = ep_cfg->hport;
 
     if (ep_cfg->ep_type == USB_ENDPOINT_TYPE_CONTROL) {
+        if (ppipe->speed == USB_SPEED_HIGH) {
+            ppipe->speed = USB_TYPE0_SPEED_HIGH;
+        } else if (ppipe->speed == USB_SPEED_FULL) {
+            ppipe->speed = USB_TYPE0_SPEED_FULL;
+        } else if (ppipe->speed == USB_SPEED_LOW) {
+            ppipe->speed = USB_TYPE0_SPEED_LOW;
+        }
     } else {
         if (ppipe->speed == USB_SPEED_HIGH) {
             ppipe->speed = USB_TXTYPE1_SPEED_HIGH;

port/template/usb_hc.c

@@ -185,7 +185,7 @@ int usbh_roothub_control(struct usb_setup_packet *setup, uint8_t *buf)
     return 0;
 }
 
-int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t speed)
+int usbh_ep_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps, uint8_t mult)
 {
     struct dwc2_pipe *chan;
 
@@ -193,7 +193,6 @@ int usbh_ep0_pipe_reconfigure(usbh_pipe_t pipe, uint8_t dev_addr, uint8_t ep_mps
 
     chan->dev_addr = dev_addr;
     chan->ep_mps = ep_mps;
-    chan->speed = speed;
 
     return 0;
 }