2.33.14

README.md

@@ -8,5 +8,5 @@ Description: https://github.com/olikraus/u8g2/wiki
 
 Issue Tracker: https://github.com/olikraus/u8g2/issues
 
-Download (2.33.13): https://github.com/olikraus/U8g2_Arduino/archive/master.zip
+Download (2.33.14): https://github.com/olikraus/U8g2_Arduino/archive/master.zip
 

examples/page_buffer/SelectionList/SelectionList.ino

@@ -68,7 +68,7 @@
 //U8G2_SSD1312_128X64_NONAME_1_SW_I2C u8g2(U8G2_R0, /* clock=*/ SCL, /* data=*/ SDA, /* reset=*/ 8);
 //U8G2_SSD1312_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ 8);
 //U8G2_SH1106_128X64_NONAME_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);
-//U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
+U8G2_SH1106_128X64_NONAME_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
 //U8G2_SH1106_128X64_VCOMH0_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// same as the NONAME variant, but maximizes setContrast() range
 //U8G2_SH1106_128X64_WINSTAR_1_4W_HW_SPI u8g2(U8G2_R0, /* cs=*/ 10, /* dc=*/ 9, /* reset=*/ 8);		// same as the NONAME variant, but uses updated SH1106 init sequence
 //U8G2_SH1106_128X32_VISIONOX_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE); 
@@ -328,9 +328,12 @@ void setup(void) {
 
   // U8g2 SH1106 Proto-Shield
   //u8g2.begin(/* menu_select_pin= */ 2, /* menu_next_pin= */ 4, /* menu_prev_pin= */ 7, /* menu_up_pin= */ 6, /* menu_down_pin= */ 5, /* menu_home_pin= */ 3);
+  
+  // U8g2 SH1106 MUI Test Shield
+  u8g2.begin(/* menu_select_pin= */ 6, /* menu_next_pin= */ 7, /* menu_prev_pin= */ 5, /* menu_up_pin= */ U8X8_PIN_NONE, /* menu_down_pin= */ U8X8_PIN_NONE, /* menu_home_pin= */ U8X8_PIN_NONE);
 
   // DOGS102 Shield (http://shieldlist.org/controlconnection/dogs102)
-  u8g2.begin(/* menu_select_pin= */ 5, /* menu_next_pin= */ 4, /* menu_prev_pin= */ 2, /* menu_up_pin= */ U8X8_PIN_NONE, /* menu_down_pin= */ U8X8_PIN_NONE, /* menu_home_pin= */ 3);
+  //u8g2.begin(/* menu_select_pin= */ 5, /* menu_next_pin= */ 4, /* menu_prev_pin= */ 2, /* menu_up_pin= */ U8X8_PIN_NONE, /* menu_down_pin= */ U8X8_PIN_NONE, /* menu_home_pin= */ 3);
   
   // DOGM128 Shield (http://shieldlist.org/schmelle2/dogm128) + DOGXL160 Shield
   //u8g2.begin(/* menu_select_pin= */ 2, /* menu_next_pin= */ 3, /* menu_prev_pin= */ 7, /* menu_up_pin= */ U8X8_PIN_NONE, /* menu_down_pin= */ U8X8_PIN_NONE, /* menu_home_pin= */ 8);

extras/ChangeLog

@@ -292,8 +292,11 @@ https://github.com/olikraus/u8g2 ChangeLog
   * ST7586 JLX384160 (issue 1932)
   * LC7981 128X128, NOT TESTED (issue 1913)
   * SSD1316 96x32 (issue 1938)
+  * GP1287AI 256X50, GP1247AI 253X63 contributed (issue 1907)
   * Added support for IST3088 (issue 1887) 
-  * Added support for GP1287AI (issue 1907)
   * Double size font functions: drawGlyphX2, drawStrX2, drawUTF8X2 (issue 1919)
   * Experimental support for ST75160, TESTING REQUIRED (issue 1642)
-  * Bugfix font compression: Reduced fontsize by up to 4% (issue 1941)
+  * Bugfix font compression: Reduced fontsize by up to 4% (issue 1941)
+  * Changed SPI mode for SH1106 from 3 to 0 (issue 1901)
+  
+  

library.properties

@@ -1,5 +1,5 @@
 name=U8g2
-version=2.33.13
+version=2.33.14
 author=oliver <olikraus@gmail.com>
 maintainer=oliver <olikraus@gmail.com>
 sentence=Monochrome LCD, OLED and eInk Library. Display controller: SSD1305, SSD1306, SSD1309, SSD1312, SSD1316, SSD1320, SSD1322, SSD1325, SSD1327, SSD1329, SSD1606, SSD1607, SH1106, SH1107, SH1108, SH1122, T6963, RA8835, LC7981, PCD8544, PCF8812, HX1230, UC1601, UC1604, UC1608, UC1610, UC1611, UC1617, UC1638, UC1701, ST7511, ST7528, ST7565, ST7567, ST7571, ST7586, ST7588, ST75256, ST75320, NT7534, ST7920, IST3020, IST7920, LD7032, KS0108, KS0713, HD44102, T7932, SED1520, SBN1661, IL3820, MAX7219. Interfaces: I2C, SPI, Parallel.

src/clib/mui.c

@@ -906,6 +906,10 @@ void mui_SendSelect(mui_t *ui)
 /*
   Same as mui_SendSelect(), but will try to find a field, which is marked as "execute on select" (MUIF_EXECUTE_ON_SELECT_BUTTON).
   If such a field exists, then this field is executed, otherwise the current field will receive the select message.
+
+  MUIF_EXECUTE_ON_SELECT_BUTTON is set by muif macro MUIF_EXECUTE_ON_SELECT_BUTTON
+  
+  used by MUIInputVersatileRotaryEncoder.ino example
 */
 void mui_SendSelectWithExecuteOnSelectFieldSearch(mui_t *ui)
 {

src/clib/mui_u8g2.c

@@ -616,6 +616,7 @@ uint8_t mui_u8g2_btn_exit_wm_fi(mui_t *ui, uint8_t msg)
         if ( value != NULL )
           *value = ui->arg;
       }
+      mui_SaveForm(ui);          // store the current form and position so that the child can jump back
       mui_LeaveForm(ui);
       return 1;
     case MUIF_MSG_CURSOR_LEAVE:

src/clib/mui_u8g2.h

@@ -128,9 +128,15 @@ u8g2_uint_t mui_get_x(mui_t *ui);
 u8g2_uint_t mui_get_y(mui_t *ui);
 u8g2_t *mui_get_U8g2(mui_t *ui);
 
-u8g2_uint_t mui_u8g2_get_draw_button_pi_flags(mui_t *ui) MUI_NOINLINE;
-void mui_u8g2_draw_button_utf(mui_t *ui, u8g2_uint_t flags, u8g2_uint_t width, u8g2_uint_t padding_h, u8g2_uint_t padding_v, const char *text) MUI_NOINLINE;
-void mui_u8g2_draw_button_utf_pi(mui_t *ui, u8g2_uint_t width, u8g2_uint_t padding_h, const char *text);
+void mui_u8g2_draw_button_utf(mui_t *ui, u8g2_uint_t flags, u8g2_uint_t width, u8g2_uint_t padding_h, u8g2_uint_t padding_v, const char *text);
+u8g2_uint_t mui_u8g2_get_pi_flags(mui_t *ui);
+void mui_u8g2_draw_button_pi(mui_t *ui, u8g2_uint_t width, u8g2_uint_t padding_h, const char *text);
+u8g2_uint_t mui_u8g2_get_fi_flags(mui_t *ui);
+void mui_u8g2_draw_button_fi(mui_t *ui, u8g2_uint_t width, u8g2_uint_t padding_h, const char *text);
+u8g2_uint_t mui_u8g2_get_pf_flags(mui_t *ui);
+void mui_u8g2_draw_button_pf(mui_t *ui, u8g2_uint_t width, u8g2_uint_t padding_h, const char *text);
+u8g2_uint_t mui_u8g2_get_if_flags(mui_t *ui);
+void mui_u8g2_draw_button_if(mui_t *ui, u8g2_uint_t width, u8g2_uint_t padding_h, const char *text);
 
 
 

src/clib/u8x8_d_gp1247ai.c

@@ -1,35 +1,38 @@
 /*
 
-u8x8_d_gp1247ai.c
-
-Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
-
-Copyright (c) 2016, olikraus@gmail.com
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this list
-of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright notice, this
-list of conditions and the following disclaimer in the documentation and/or other
-materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  u8x8_d_gp1247ai.c
+  
+  https://github.com/olikraus/u8g2/issues/1907
+  https://github.com/olikraus/u8g2/pull/1892  
+
+  Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+  Copyright (c) 2022, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification,
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list
+  of conditions and the following disclaimer.
+
+  * Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or other
+  materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 */
 

src/clib/u8x8_d_gp1287ai.c

@@ -1,35 +1,38 @@
 /*
 
-u8x8_d_gp1287ai.c
-
-Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
-
-Copyright (c) 2016, olikraus@gmail.com
-All rights reserved.
-
-Redistribution and use in source and binary forms, with or without modification,
-are permitted provided that the following conditions are met:
-
-* Redistributions of source code must retain the above copyright notice, this list
-of conditions and the following disclaimer.
-
-* Redistributions in binary form must reproduce the above copyright notice, this
-list of conditions and the following disclaimer in the documentation and/or other
-materials provided with the distribution.
-
-THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
-CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
-INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
-CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
-STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
-ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  u8x8_d_gp1287ai.c
+  
+  https://github.com/olikraus/u8g2/issues/1907
+  https://github.com/olikraus/u8g2/pull/1892  
+
+  Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+  Copyright (c) 2022, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification,
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list
+  of conditions and the following disclaimer.
+
+  * Redistributions in binary form must reproduce the above copyright notice, this
+  list of conditions and the following disclaimer in the documentation and/or other
+  materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
 */
 

src/clib/u8x8_d_ssd1306_128x64_noname.c

@@ -464,7 +464,7 @@ static const u8x8_display_info_t u8x8_sh1106_128x64_noname_display_info =
   /* sda_setup_time_ns = */ 50,		/* SSD1306: 15ns, but cycle time is 100ns, so use 100/2 */
   /* sck_pulse_width_ns = */ 50,	/* SSD1306: 20ns, but cycle time is 100ns, so use 100/2, AVR: below 70: 8 MHz, >= 70 --> 4MHz clock */
   /* sck_clock_hz = */ 4000000UL,	/* since Arduino 1.6.0, the SPI bus speed in Hz. Should be  1000000000/sck_pulse_width_ns, increased to 8MHz (issue 215) */
-  /* spi_mode = */ 3,		/* active low (clock is high by default), rising edge, this seems to be a difference to the ssd1306 */
+  /* spi_mode = */ 0,		/* issue 1901: changed mode from 3 to 0 */
   /* i2c_bus_clock_100kHz = */ 4,
   /* data_setup_time_ns = */ 40,
   /* write_pulse_width_ns = */ 150,	/* SSD1306: cycle time is 300ns, so use 300/2 = 150 */

src/clib/u8x8_debounce.c

@@ -102,7 +102,7 @@ static uint8_t u8x8_find_first_diff(uint8_t a, uint8_t b)
 
 */
 
-#ifndef __unix__
+#ifdef __unix__xxxxxx_THIS_IS_DISABLED
 
 #include <stdio.h>
 #include <stdlib.h>