2.16.7

examples/full_buffer/FPS/FPS.ino

@@ -249,6 +249,7 @@
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_F u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FG with GND

examples/full_buffer/GraphicsTest/GraphicsTest.ino

@@ -133,6 +133,7 @@
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_F u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FG with GND

examples/full_buffer/HelloWorld/HelloWorld.ino

@@ -132,6 +132,7 @@
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_F u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FG with GND

examples/full_buffer/PrintUTF8/PrintUTF8.ino

@@ -135,6 +135,7 @@
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_F u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FG with GND

examples/full_buffer/SelectionList/SelectionList.ino

@@ -132,6 +132,7 @@
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_F u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FG with GND

examples/full_buffer/U8g2Logo/U8g2Logo.ino

@@ -133,6 +133,7 @@
 //U8G2_LC7981_160X80_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_F_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_F u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_F_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FG with GND

examples/page_buffer/Clock/Clock.ino

@@ -137,6 +137,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/ContrastTest/ContrastTest.ino

@@ -134,6 +134,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/DirectAccess/DirectAccess.ino

@@ -138,6 +138,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/ExtUTF8/ExtUTF8.ino

@@ -134,6 +134,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/FPS/FPS.ino

@@ -308,6 +308,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/FlipMode/FlipMode.ino

@@ -129,6 +129,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/GraphicsTest/GraphicsTest.ino

@@ -134,6 +134,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/HelloWorld/HelloWorld.ino

@@ -134,6 +134,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0
@@ -188,6 +189,6 @@ void loop(void) {
     u8g2.setFont(u8g2_font_ncenB14_tr);
     u8g2.drawStr(0,24,"Hello World!");
   } while ( u8g2.nextPage() );
-  //delay(1000);
+  delay(1000);
 }
 

examples/page_buffer/PowerSaveTest/PowerSaveTest.ino

@@ -128,6 +128,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/PrintHelloWorld/PrintHelloWorld.ino

@@ -135,6 +135,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/PrintUTF8/PrintUTF8.ino

@@ -135,6 +135,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/ScrollingText/ScrollingText.ino

@@ -138,6 +138,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/SelectionList/SelectionList.ino

@@ -124,6 +124,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/U8g2Logo/U8g2Logo.ino

@@ -133,6 +133,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/XBM/XBM.ino

@@ -138,6 +138,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

examples/page_buffer/XORTest/XORTest.ino

@@ -138,6 +138,7 @@
 //U8G2_LC7981_160X80_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_160X160_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
 //U8G2_LC7981_240X128_1_6800 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 18, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RW with GND
+//U8G2_SED1520_122X32_1 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*dc=*/ A0, /*e1=*/ A3, /*e2=*/ A2, /* reset=*/  A4); 	// Set R/W to low!
 //U8G2_T6963_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_T6963_256X64_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect RD with +5V, FS0 and FS1 with GND
 //U8G2_SED1330_240X128_1_8080 u8g2(U8G2_R0, 8, 9, 10, 11, 4, 5, 6, 7, /*enable=*/ 17, /*cs=*/ 14, /*dc=*/ 15, /*reset=*/ 16); // Connect /RD = E with +5V, enable is /WR = RW, FG with GND, 14=Uno Pin A0

extras/ChangeLog

@@ -124,4 +124,6 @@ https://github.com/olikraus/u8g2 ChangeLog
   * Added support for MAX7219 (issue 280)
   * Performance optimization for SSD1322/25/27  (issue 302)
   * Support for 96x16 SSD1306 OLED (issue 295)
+  * Fixed OldStandard-Bold fonts (osb, issue 306)
+  * Added sharp big S (issue 314)
   

library.properties

@@ -1,9 +1,9 @@
 name=U8g2
-version=2.16.6
+version=2.16.7
 author=oliver <olikraus@gmail.com>
 maintainer=oliver <olikraus@gmail.com>
-sentence=Monochrome LCD, OLED and eInk Library. Display controller: SSD1305, SSD1306, SSD1309, SSD1322, SSD1325, SSD1327, SSD1329, SSD1606, SSD1607, SH1106, T6963, RA8835, LC7981, PCD8544, PCF8812, UC1604, UC1608, UC1610, UC1611, UC1701, ST7565, ST7567, NT7534, IST3020, ST7920, LD7032, KS0108. Interfaces: I2C, SPI, Parallel.
-paragraph=Monochrome LCD, OLED and eInk Library. Successor of U8glib. Supported display controller: SSD1305, SSD1306, SSD1309, SSD1322, SSD1325, SSD1327, SSD1329, SSD1606, SSD1607, SH1106, T6963, RA8835, LC7981, PCD8544, PCF8812, UC1604, UC1608, UC1610, UC1611, UC1701, ST7565, ST7567, NT7534, IST3020, ST7920, LD7032, KS0108. Supported interfaces: I2C, SPI, Parallel. Features: UTF8, >700 fonts, U8x8 char output.
+sentence=Monochrome LCD, OLED and eInk Library. Display controller: SSD1305, SSD1306, SSD1309, SSD1322, SSD1325, SSD1327, SSD1329, SSD1606, SSD1607, SH1106, T6963, RA8835, LC7981, PCD8544, PCF8812, UC1604, UC1608, UC1610, UC1611, UC1701, ST7565, ST7567, NT7534, IST3020, ST7920, LD7032, KS0108, SED1520, SBN1661, MAX7219. Interfaces: I2C, SPI, Parallel.
+paragraph=Monochrome LCD, OLED and eInk Library. Successor of U8glib. Supported display controller: SSD1305, SSD1306, SSD1309, SSD1322, SSD1325, SSD1327, SSD1329, SSD1606, SSD1607, SH1106, T6963, RA8835, LC7981, PCD8544, PCF8812, UC1604, UC1608, UC1610, UC1611, UC1701, ST7565, ST7567, NT7534, IST3020, ST7920, LD7032, KS0108, SED1520, SBN1661, MAX7219. Supported interfaces: I2C, SPI, Parallel. Features: UTF8, >700 fonts, U8x8 char output.
 category=Display
 url=https://github.com/olikraus/u8g2
 architectures=*

src/U8g2lib.h

@@ -5204,6 +5204,42 @@ class U8G2_IST3020_ERC19264_F_8080 : public U8G2 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8G2_SBN1661_122X32_1 : public U8G2 {
+  public: U8G2_SBN1661_122X32_1(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8G2() {
+    u8g2_Setup_sbn1661_122x32_1(&u8g2, rotation, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
+class U8G2_SBN1661_122X32_2 : public U8G2 {
+  public: U8G2_SBN1661_122X32_2(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8G2() {
+    u8g2_Setup_sbn1661_122x32_2(&u8g2, rotation, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
+class U8G2_SBN1661_122X32_F : public U8G2 {
+  public: U8G2_SBN1661_122X32_F(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8G2() {
+    u8g2_Setup_sbn1661_122x32_f(&u8g2, rotation, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
+class U8G2_SED1520_122X32_1 : public U8G2 {
+  public: U8G2_SED1520_122X32_1(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8G2() {
+    u8g2_Setup_sed1520_122x32_1(&u8g2, rotation, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
+class U8G2_SED1520_122X32_2 : public U8G2 {
+  public: U8G2_SED1520_122X32_2(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8G2() {
+    u8g2_Setup_sed1520_122x32_2(&u8g2, rotation, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
+class U8G2_SED1520_122X32_F : public U8G2 {
+  public: U8G2_SED1520_122X32_F(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8G2() {
+    u8g2_Setup_sed1520_122x32_f(&u8g2, rotation, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
 class U8G2_KS0108_128X64_1 : public U8G2 {
   public: U8G2_KS0108_128X64_1(const u8g2_cb_t *rotation, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t dc, uint8_t cs0, uint8_t cs1, uint8_t cs2, uint8_t reset = U8X8_PIN_NONE) : U8G2() {
     u8g2_Setup_ks0108_128x64_1(&u8g2, rotation, u8x8_byte_arduino_ks0108, u8x8_gpio_and_delay_arduino);

src/U8x8lib.cpp

@@ -1074,3 +1074,19 @@ void u8x8_SetPin_KS0108(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_
   u8x8_SetPin(u8x8, U8X8_PIN_CS2, cs2);
   u8x8_SetPin(u8x8, U8X8_PIN_RESET, reset);
 }
+
+void u8x8_SetPin_SED1520(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset)
+{
+  u8x8_SetPin(u8x8, U8X8_PIN_D0, d0);
+  u8x8_SetPin(u8x8, U8X8_PIN_D1, d1);
+  u8x8_SetPin(u8x8, U8X8_PIN_D2, d2);
+  u8x8_SetPin(u8x8, U8X8_PIN_D3, d3);
+  u8x8_SetPin(u8x8, U8X8_PIN_D4, d4);
+  u8x8_SetPin(u8x8, U8X8_PIN_D5, d5);
+  u8x8_SetPin(u8x8, U8X8_PIN_D6, d6);
+  u8x8_SetPin(u8x8, U8X8_PIN_D7, d7);
+  u8x8_SetPin(u8x8, U8X8_PIN_E, e1);
+  u8x8_SetPin(u8x8, U8X8_PIN_CS, e2);
+  u8x8_SetPin(u8x8, U8X8_PIN_DC, dc);
+  u8x8_SetPin(u8x8, U8X8_PIN_RESET, reset);
+}

src/U8x8lib.h

@@ -110,6 +110,7 @@ void u8x8_SetPin_HW_I2C(u8x8_t *u8x8, uint8_t reset, uint8_t clock = U8X8_PIN_NO
 void u8x8_SetPin_8Bit_6800(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t cs, uint8_t dc, uint8_t reset);
 void u8x8_SetPin_8Bit_8080(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t wr, uint8_t cs, uint8_t dc, uint8_t reset);
 void u8x8_SetPin_KS0108(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t dc, uint8_t cs0, uint8_t cs1, uint8_t cs2, uint8_t reset);
+void u8x8_SetPin_SED1520(u8x8_t *u8x8, uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset);
 
 //void u8x8_Setup_4Wire_SW_SPI(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t clock, uint8_t data, uint8_t cs, uint8_t dc, uint8_t reset);
 //void u8x8_Setup_3Wire_SW_SPI(u8x8_t *u8x8, u8x8_msg_cb display_cb, uint8_t clock, uint8_t data, uint8_t cs, uint8_t reset);
@@ -1895,6 +1896,18 @@ class U8X8_IST3020_ERC19264_8080 : public U8X8 {
     u8x8_SetPin_8Bit_8080(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, enable, cs, dc, reset);
   }
 };
+class U8X8_SBN1661_122X32 : public U8X8 {
+  public: U8X8_SBN1661_122X32(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_sbn1661_122x32, u8x8_cad_001, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
+class U8X8_SED1520_122X32 : public U8X8 {
+  public: U8X8_SED1520_122X32(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t dc, uint8_t e1, uint8_t e2, uint8_t reset) : U8X8() {
+    u8x8_Setup(getU8x8(), u8x8_d_sed1520_122x32, u8x8_cad_001, u8x8_byte_sed1520, u8x8_gpio_and_delay_arduino);
+    u8x8_SetPin_SED1520(getU8x8(), d0, d1, d2, d3, d4, d5, d6, d7, dc, e1, e2, reset);
+  }
+};
 class U8X8_KS0108_128X64 : public U8X8 {
   public: U8X8_KS0108_128X64(uint8_t d0, uint8_t d1, uint8_t d2, uint8_t d3, uint8_t d4, uint8_t d5, uint8_t d6, uint8_t d7, uint8_t enable, uint8_t dc, uint8_t cs0, uint8_t cs1, uint8_t cs2, uint8_t reset = U8X8_PIN_NONE) : U8X8() {
     u8x8_Setup(getU8x8(), u8x8_d_ks0108_128x64, u8x8_cad_001, u8x8_byte_arduino_ks0108, u8x8_gpio_and_delay_arduino);

src/clib/u8g2.h

@@ -487,6 +487,12 @@ uint8_t *u8g2_m_nt7534_16_f(uint8_t *page_cnt);
 uint8_t *u8g2_m_ist3020_24_1(uint8_t *page_cnt);
 uint8_t *u8g2_m_ist3020_24_2(uint8_t *page_cnt);
 uint8_t *u8g2_m_ist3020_24_f(uint8_t *page_cnt);
+uint8_t *u8g2_m_sbn1661_16_1(uint8_t *page_cnt);
+uint8_t *u8g2_m_sbn1661_16_2(uint8_t *page_cnt);
+uint8_t *u8g2_m_sbn1661_16_f(uint8_t *page_cnt);
+uint8_t *u8g2_m_sed1520_16_1(uint8_t *page_cnt);
+uint8_t *u8g2_m_sed1520_16_2(uint8_t *page_cnt);
+uint8_t *u8g2_m_sed1520_16_f(uint8_t *page_cnt);
 uint8_t *u8g2_m_ks0108_16_1(uint8_t *page_cnt);
 uint8_t *u8g2_m_ks0108_16_2(uint8_t *page_cnt);
 uint8_t *u8g2_m_ks0108_16_f(uint8_t *page_cnt);
@@ -732,6 +738,12 @@ void u8g2_Setup_nt7534_tg12864r_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_
 void u8g2_Setup_ist3020_erc19264_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ist3020_erc19264_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ist3020_erc19264_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_sbn1661_122x32_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_sbn1661_122x32_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_sbn1661_122x32_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_sed1520_122x32_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_sed1520_122x32_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
+void u8g2_Setup_sed1520_122x32_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ks0108_128x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ks0108_128x64_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);
 void u8g2_Setup_ks0108_128x64_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb);

src/clib/u8g2_d_memory.c

@@ -489,6 +489,42 @@ uint8_t *u8g2_m_ist3020_24_f(uint8_t *page_cnt)
   *page_cnt = 8;
   return buf;
 }
+uint8_t *u8g2_m_sbn1661_16_1(uint8_t *page_cnt)
+{
+  static uint8_t buf[128];
+  *page_cnt = 1;
+  return buf;
+}
+uint8_t *u8g2_m_sbn1661_16_2(uint8_t *page_cnt)
+{
+  static uint8_t buf[256];
+  *page_cnt = 2;
+  return buf;
+}
+uint8_t *u8g2_m_sbn1661_16_f(uint8_t *page_cnt)
+{
+  static uint8_t buf[512];
+  *page_cnt = 4;
+  return buf;
+}
+uint8_t *u8g2_m_sed1520_16_1(uint8_t *page_cnt)
+{
+  static uint8_t buf[128];
+  *page_cnt = 1;
+  return buf;
+}
+uint8_t *u8g2_m_sed1520_16_2(uint8_t *page_cnt)
+{
+  static uint8_t buf[256];
+  *page_cnt = 2;
+  return buf;
+}
+uint8_t *u8g2_m_sed1520_16_f(uint8_t *page_cnt)
+{
+  static uint8_t buf[512];
+  *page_cnt = 4;
+  return buf;
+}
 uint8_t *u8g2_m_ks0108_16_1(uint8_t *page_cnt)
 {
   static uint8_t buf[128];

src/clib/u8g2_d_setup.c

@@ -1787,6 +1787,62 @@ void u8g2_Setup_ist3020_erc19264_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8
   buf = u8g2_m_ist3020_24_f(&tile_buf_height);
   u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
 }
+/* sbn1661 */
+/* sbn1661 1 */
+void u8g2_Setup_sbn1661_122x32_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_sbn1661_122x32, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_sbn1661_16_1(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* sbn1661 2 */
+void u8g2_Setup_sbn1661_122x32_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_sbn1661_122x32, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_sbn1661_16_2(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* sbn1661 f */
+void u8g2_Setup_sbn1661_122x32_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_sbn1661_122x32, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_sbn1661_16_f(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* sed1520 */
+/* sed1520 1 */
+void u8g2_Setup_sed1520_122x32_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_sed1520_122x32, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_sed1520_16_1(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* sed1520 2 */
+void u8g2_Setup_sed1520_122x32_2(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_sed1520_122x32, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_sed1520_16_2(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
+/* sed1520 f */
+void u8g2_Setup_sed1520_122x32_f(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)
+{
+  uint8_t tile_buf_height;
+  uint8_t *buf;
+  u8g2_SetupDisplay(u8g2, u8x8_d_sed1520_122x32, u8x8_cad_001, byte_cb, gpio_and_delay_cb);
+  buf = u8g2_m_sed1520_16_f(&tile_buf_height);
+  u8g2_SetupBuffer(u8g2, buf, tile_buf_height, u8g2_ll_hvline_vertical_top_lsb, rotation);
+}
 /* ks0108 */
 /* ks0108 1 */
 void u8g2_Setup_ks0108_128x64_1(u8g2_t *u8g2, const u8g2_cb_t *rotation, u8x8_msg_cb byte_cb, u8x8_msg_cb gpio_and_delay_cb)

src/clib/u8x8.h

@@ -610,6 +610,7 @@ void u8x8_byte_set_ks0108_cs(u8x8_t *u8x8, uint8_t arg) U8X8_NOINLINE;
 uint8_t u8x8_byte_ks0108(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_byte_ssd13xx_sw_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);  /* OBSOLETE! */
 uint8_t u8x8_byte_sw_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
+uint8_t u8x8_byte_sed1520(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 
 
 /*==========================================*/
@@ -651,8 +652,8 @@ uint8_t u8x8_byte_sw_i2c(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_p
 #define U8X8_MSG_GPIO_D5			U8X8_MSG_GPIO(U8X8_PIN_D5)
 #define U8X8_MSG_GPIO_D6			U8X8_MSG_GPIO(U8X8_PIN_D6)
 #define U8X8_MSG_GPIO_D7			U8X8_MSG_GPIO(U8X8_PIN_D7)
-#define U8X8_MSG_GPIO_E 			U8X8_MSG_GPIO(U8X8_PIN_E)
-#define U8X8_MSG_GPIO_CS			U8X8_MSG_GPIO(U8X8_PIN_CS)
+#define U8X8_MSG_GPIO_E 			U8X8_MSG_GPIO(U8X8_PIN_E)			// used as E1 for the SED1520
+#define U8X8_MSG_GPIO_CS			U8X8_MSG_GPIO(U8X8_PIN_CS)		// used as E2 for the SED1520
 #define U8X8_MSG_GPIO_DC			U8X8_MSG_GPIO(U8X8_PIN_DC)
 #define U8X8_MSG_GPIO_RESET 		U8X8_MSG_GPIO(U8X8_PIN_RESET)
 #define U8X8_MSG_GPIO_I2C_CLOCK	U8X8_MSG_GPIO(U8X8_PIN_I2C_CLOCK)
@@ -773,6 +774,8 @@ uint8_t u8x8_d_uc1611_ea_dogxl240(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, vo
 uint8_t u8x8_d_uc1617_jlx128128(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_ks0108_128x64(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_ks0108_erm19264(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
+uint8_t u8x8_d_sbn1661_122x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
+uint8_t u8x8_d_sed1520_122x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_pcd8544_84x48(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_pcf8812_96x65(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);
 uint8_t u8x8_d_ssd1606_172x72(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr);

src/clib/u8x8_byte.c

@@ -371,6 +371,64 @@ uint8_t u8x8_byte_ks0108(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_p
 }
 
 
+/* sed1520 or sbn1661 
+  U8X8_MSG_GPIO_E --> E1
+  U8X8_MSG_GPIO_CS --> E2
+*/
+uint8_t u8x8_byte_sed1520(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  uint8_t i, b;
+  uint8_t *data;
+  static uint8_t enable_pin;
+ 
+  switch(msg)
+  {
+    case U8X8_MSG_BYTE_SEND:
+      data = (uint8_t *)arg_ptr;
+      while( arg_int > 0 )
+      {
+	b = *data;
+	data++;
+	arg_int--;
+	for( i = U8X8_MSG_GPIO_D0; i <= U8X8_MSG_GPIO_D7; i++ )
+	{
+	  u8x8_gpio_call(u8x8, i, b&1);
+	  b >>= 1;
+	}    
+	
+	u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_NANO, u8x8->display_info->data_setup_time_ns);
+	u8x8_gpio_call(u8x8, enable_pin, 1);
+	u8x8_gpio_Delay(u8x8, U8X8_MSG_DELAY_NANO, u8x8->display_info->write_pulse_width_ns);
+	u8x8_gpio_call(u8x8, enable_pin, 0);
+      }
+      break;
+      
+    case U8X8_MSG_BYTE_INIT:
+      /* disable chipselect */
+      u8x8_gpio_SetCS(u8x8, u8x8->display_info->chip_disable_level);    
+      /* ensure that the enable signals are low */
+      u8x8_gpio_call(u8x8, U8X8_MSG_GPIO_E, 0);
+      u8x8_gpio_call(u8x8, U8X8_MSG_GPIO_CS, 0);
+      enable_pin = U8X8_MSG_GPIO_E;
+      break;
+    case U8X8_MSG_BYTE_SET_DC:
+      u8x8_gpio_SetDC(u8x8, arg_int);
+      break;
+    case U8X8_MSG_BYTE_START_TRANSFER:
+      /* cs lines are not supported for the SED1520/SBN1661 */
+      /* instead, this will select the E1 or E2 line */ 
+      enable_pin = U8X8_MSG_GPIO_E;
+      if ( arg_int != 0 )
+	enable_pin = U8X8_MSG_GPIO_CS;
+      break;
+    case U8X8_MSG_BYTE_END_TRANSFER:
+      break;
+    default:
+      return 0;
+  }
+  return 1;
+}
+
 /*=========================================*/
 
 

src/clib/u8x8_d_sbn1661.c

@@ -0,0 +1,215 @@
+/*
+
+  u8x8_d_sbn1661.c 
+  
+  SED1520 / SBN1661 122x32 5V LCD
+  
+  Universal 8bit Graphics Library (https://github.com/olikraus/u8g2/)
+
+  Copyright (c) 2016, olikraus@gmail.com
+  All rights reserved.
+
+  Redistribution and use in source and binary forms, with or without modification, 
+  are permitted provided that the following conditions are met:
+
+  * Redistributions of source code must retain the above copyright notice, this list 
+    of conditions and the following disclaimer.
+    
+  * Redistributions in binary form must reproduce the above copyright notice, this 
+    list of conditions and the following disclaimer in the documentation and/or other 
+    materials provided with the distribution.
+
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND 
+  CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, 
+  INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 
+  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 
+  DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR 
+  CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 
+  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 
+  NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 
+  LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 
+  CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 
+  STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 
+  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.  
+
+  
+*/
+#include "u8x8.h"
+
+
+
+
+static const uint8_t u8x8_d_sbn1661_init_seq[] = {
+  U8X8_C(0x0c0),		                /* display start at line 0  */  
+  U8X8_C(0x0a0),		                /* a0: ADC forward, a1: ADC reverse */  
+  U8X8_C(0x0a4),		                /* a4: normal driving, a5: power save */  
+  U8X8_C(0x0a9),		                /* a8: 1/16, a9: 1/32 duty */  
+
+  //U8X8_C(0x0af),				/* display on */
+  
+  U8X8_END()             			/* end of sequence */
+};
+
+static const uint8_t u8x8_d_sbn1661_powersave0_seq[] = {
+  U8X8_C(0x0af),		                /* display on */
+  U8X8_END()             			/* end of sequence */
+};
+
+static const uint8_t u8x8_d_sbn1661_powersave1_seq[] = {
+  U8X8_C(0x0ae),		                /* display off */
+  U8X8_END()             			/* end of sequence */
+};
+
+
+struct u8x8_sbn1661_vars
+{
+  uint8_t *ptr;
+  uint8_t x;
+  uint8_t c;
+  uint8_t arg_int;
+};
+
+static void u8x8_sbn1661_out(u8x8_t *u8x8, struct u8x8_sbn1661_vars *v, void *arg_ptr)
+{
+  uint8_t cnt;
+  u8x8_cad_SendCmd(u8x8, 0x000 | ((v->x << 3) & 63) );
+  u8x8_cad_SendCmd(u8x8, 0x0b8 | (((u8x8_tile_t *)arg_ptr)->y_pos));
+  
+  while( v->arg_int > 0 )
+  {
+      /* calculate tiles to next boundary (end or chip limit) */
+      cnt = v->x;
+      cnt += 8;
+      cnt &= 0x0f8;
+      cnt -= v->x;
+            
+      if ( cnt > v->c )
+	cnt = v->c;
+    
+      /* of course we still could use cnt=1 here... */
+      /* but setting cnt to 1 is not very efficient */
+      //cnt = 1;
+    
+      v->x +=cnt;
+      v->c-=cnt;
+      cnt<<=3;
+      u8x8_cad_SendData(u8x8, cnt, v->ptr);	/* note: SendData can not handle more than 255 bytes */    
+      v->ptr += cnt;
+    
+      if ( v->c == 0 )
+      {
+	v->ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
+	v->c = ((u8x8_tile_t *)arg_ptr)->cnt;
+	v->arg_int--;
+      }
+      if ( ((v->x) & 7) == 0 )
+	break;       
+  } 
+}
+
+
+static const u8x8_display_info_t u8x8_sbn1661_122x32_display_info =
+{
+  /* chip_enable_level = */ 0,		/* sbn1661: Not used */
+  /* chip_disable_level = */ 1,		/* sbn1661: Not used */
+  
+  /* post_chip_enable_wait_ns = */ 100,
+  /* pre_chip_disable_wait_ns = */ 20,
+  /* reset_pulse_width_ms = */ 1, 
+  /* post_reset_wait_ms = */ 6, 		/*  */
+  /* sda_setup_time_ns = */ 12,		
+  /* sck_pulse_width_ns = */ 75,	/* sbn1661: Not used */
+  /* sck_clock_hz = */ 4000000UL,	/* sbn1661: Not used */
+  /* spi_mode = */ 0,				/* active high, rising edge */
+  /* i2c_bus_clock_100kHz = */ 4,	/* sbn1661: Not used */
+  /* data_setup_time_ns = */ 200,
+  /* write_pulse_width_ns = */ 200,	/*  */
+  /* tile_width = */ 16,		/* width of 16*8=128 pixel */
+  /* tile_hight = */ 4,
+  /* default_x_offset = */ 0,
+  /* flipmode_x_offset = */ 0,
+  /* pixel_width = */ 122,
+  /* pixel_height = */ 32
+};
+
+uint8_t u8x8_d_sbn1661_122x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  uint8_t *ptr;
+  //uint8_t x;
+  //uint8_t c;
+  
+  switch(msg)
+  {
+    case U8X8_MSG_DISPLAY_SETUP_MEMORY:
+      u8x8_d_helper_display_setup_memory(u8x8, &u8x8_sbn1661_122x32_display_info);
+      break;
+    case U8X8_MSG_DISPLAY_INIT:
+      u8x8_d_helper_display_init(u8x8);
+    
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 0, NULL);
+      u8x8_cad_SendSequence(u8x8, u8x8_d_sbn1661_init_seq);
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 0, NULL);
+    
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 1, NULL);
+      u8x8_cad_SendSequence(u8x8, u8x8_d_sbn1661_init_seq);
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 1, NULL);
+      break;
+    case U8X8_MSG_DISPLAY_SET_POWER_SAVE:
+      
+      if ( arg_int == 0 )
+      {
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 0, NULL);
+	u8x8_cad_SendSequence(u8x8, u8x8_d_sbn1661_powersave0_seq);
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 0, NULL);
+
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 1, NULL);
+	u8x8_cad_SendSequence(u8x8, u8x8_d_sbn1661_powersave0_seq);
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 1, NULL);	
+      }
+      else
+      {
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 0, NULL);
+	u8x8_cad_SendSequence(u8x8, u8x8_d_sbn1661_powersave1_seq);
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 0, NULL);
+	
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 1, NULL);
+	u8x8_cad_SendSequence(u8x8, u8x8_d_sbn1661_powersave1_seq);
+	u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 1, NULL);
+	
+      }
+      break;
+    case U8X8_MSG_DISPLAY_DRAW_TILE:
+
+      ptr = ((u8x8_tile_t *)arg_ptr)->tile_ptr;
+      // x and c are ignored (u8g2 only)
+      //x = ((u8x8_tile_t *)arg_ptr)->x_pos;
+      //c = ((u8x8_tile_t *)arg_ptr)->cnt;
+      
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 0, NULL);
+      u8x8_cad_SendCmd(u8x8, 0x000 | 0);		// column 0
+      u8x8_cad_SendCmd(u8x8, 0x0b8 | (((u8x8_tile_t *)arg_ptr)->y_pos));
+      u8x8_cad_SendData(u8x8, 61, ptr);	/* note: SendData can not handle more than 255 bytes */    
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 0, NULL);
+
+      ptr += 61;
+      
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_START_TRANSFER, 1, NULL);
+      u8x8_cad_SendCmd(u8x8, 0x000 | 0);		// column 0
+      u8x8_cad_SendCmd(u8x8, 0x0b8 | (((u8x8_tile_t *)arg_ptr)->y_pos));
+    
+      u8x8_cad_SendData(u8x8, 61, ptr);	/* note: SendData can not handle more than 255 bytes */    
+      u8x8->cad_cb(u8x8, U8X8_MSG_CAD_END_TRANSFER, 1, NULL);
+    
+      break;
+    default:
+      return 0;
+  }
+  return 1;
+}
+
+uint8_t u8x8_d_sed1520_122x32(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int, void *arg_ptr)
+{
+  return u8x8_d_sbn1661_122x32(u8x8, msg, arg_int, arg_ptr);
+
+}

src/clib/u8x8_d_ssd1306_128x64_noname.c

@@ -49,7 +49,7 @@ static const uint8_t u8x8_d_ssd1306_128x64_noname_init_seq[] = {
   U8X8_CA(0x0a8, 0x03f),		/* multiplex ratio */
   U8X8_CA(0x0d3, 0x000),		/* display offset */
   U8X8_C(0x040),		                /* set display start line to 0 */
-  U8X8_CA(0x08d, 0x014),		/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable */
+  U8X8_CA(0x08d, 0x014),		/* [2] charge pump setting (p62): 0x014 enable, 0x010 disable, SSD1306 only, should be removed for SH1106 */
   U8X8_CA(0x020, 0x000),		/* page addressing mode */
   
   U8X8_C(0x0a1),				/* segment remap a0/a1*/
@@ -321,6 +321,8 @@ uint8_t u8x8_d_sh1106_128x64_noname(u8x8_t *u8x8, uint8_t msg, uint8_t arg_int,
   {
     case U8X8_MSG_DISPLAY_INIT:
       u8x8_d_helper_display_init(u8x8);
+      /* maybe use a better init sequence */
+      /* https://www.mikrocontroller.net/topic/431371 */
       u8x8_cad_SendSequence(u8x8, u8x8_d_ssd1306_128x64_noname_init_seq);    
       break;
     case U8X8_MSG_DISPLAY_SETUP_MEMORY:

src/clib/u8x8_d_st7565.c

@@ -197,9 +197,9 @@ static const uint8_t u8x8_d_st7565_dogm128_init_seq[] = {
   
   U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
   U8X8_C(0x0a2),		                /* LCD bias 1/9 */
-  U8X8_C(0x02f),		                /* all power  control circuits on */
+  U8X8_C(0x02f),		                /* all power  control circuits on (regulator, booster and follower) */
   U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x */
-  U8X8_C(0x027),		                /* regulator, booster and follower */
+  U8X8_C(0x027),		                /* set V0 voltage resistor ratio to max  */
   U8X8_CA(0x081, 0x018),		/* set contrast, contrast value, EA default: 0x016 */
   
   U8X8_C(0x0ae),		                /* display off */
@@ -266,7 +266,7 @@ static const uint8_t u8x8_d_st7565_64128n_init_seq[] = {
   U8X8_C(0x0a2),		                /* LCD bias 1/9 */
   U8X8_C(0x02f),		                /* all power  control circuits on */
   //U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x */
-  //U8X8_C(0x027),		                /* regulator, booster and follower */
+  //U8X8_C(0x027),		                /* set V0 voltage resistor ratio to max  */
 
   U8X8_C(0x010),                   		/* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */
   
@@ -291,6 +291,7 @@ static const uint8_t u8x8_d_st7565_64128n_init_seq[] = {
   U8X8_C(0x028 | 0x06),            /* power control: turn on voltage regulator */
   U8X8_C(0x028 | 0x07),            /* power control: turn on voltage follower */
   U8X8_C(0x010),                   /* Set V0 voltage resistor ratio. Setting for controlling brightness of Displaytech 64128N */
+					      /* 19 Jul 17: Not sure if this is true, cmd 0x1? is used to set the column */
   U8X8_C(0x0a6),                   /* display normal, bit val 0: LCD pixel off. */
   U8X8_C(0x081),      	           /* set contrast */
   U8X8_C(0x01e),        	       /* Contrast value. Setting for controlling brightness of Displaytech 64128N */
@@ -384,9 +385,9 @@ static const uint8_t u8x8_d_st7565_zolen_128x64_init_seq[] = {
   
   U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
   U8X8_C(0x0a2),		                /* LCD bias 1/9 */
-  U8X8_C(0x02f),		                /* all power  control circuits on */
+  U8X8_C(0x02f),		                /* all power  control circuits on (regulator, booster and follower) */
   U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x */
-  U8X8_C(0x027),		                /* regulator, booster and follower */
+  U8X8_C(0x027),		                /* set V0 voltage resistor ratio to max  */
   U8X8_CA(0x081, 0x007),		/* set contrast, contrast value, EA default: 0x016 */
   
   U8X8_C(0x0ae),		                /* display off */
@@ -633,9 +634,9 @@ static const uint8_t u8x8_d_st7565_lm6059_init_seq[] = {
   
   U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
   U8X8_C(0x0a3),		                /* LCD bias 1/9 */
-  U8X8_C(0x02f),		                /* all power  control circuits on */
-  U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x (ST7567 feature)*/
-  U8X8_C(0x027),		                /* regulator, booster and follower */
+  U8X8_C(0x02f),		                /* all power  control circuits on (regulator, booster and follower) */
+  U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x (ST7567 feature) */
+  U8X8_C(0x027),		                /* set V0 voltage resistor ratio to max  */
   U8X8_CA(0x081, 0x018),		/* set contrast, contrast value, EA default: 0x016 */
   
   U8X8_C(0x0ae),		                /* display off */
@@ -725,9 +726,9 @@ static const uint8_t u8x8_d_st7565_erc12864_init_seq[] = {
   
   U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
   U8X8_C(0x0a3),		                /* LCD bias 1/9 */
-  U8X8_C(0x02f),		                /* all power  control circuits on */
+  U8X8_C(0x02f),		                /* all power  control circuits on (regulator, booster and follower) */
   U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x (ST7567 feature)*/
-  U8X8_C(0x027),		                /* regulator, booster and follower */
+  U8X8_C(0x027),		                /* set V0 voltage resistor ratio to max  */
   U8X8_CA(0x081, 0x018),		/* set contrast, contrast value, EA default: 0x016 */
   
   U8X8_C(0x0ae),		                /* display off */
@@ -818,9 +819,9 @@ static const uint8_t u8x8_d_nt7534_tg12864r_init_seq[] = {
   
   U8X8_C(0x0a6),		                /* display normal, bit val 0: LCD pixel off. */
   U8X8_C(0x0a3),		                /* LCD bias 1/9 */
-  U8X8_C(0x02f),		                /* all power  control circuits on */
+  U8X8_C(0x02f),		                /* all power  control circuits on (regulator, booster and follower) */
   //U8X8_CA(0x0f8, 0x000),		/* set booster ratio to 4x (ST7567 feature)*/
-  U8X8_C(0x027),		                /* regulator, booster and follower */
+  U8X8_C(0x027),		                /* set V0 voltage resistor ratio to max  */
   U8X8_CA(0x081, 0x009),		/* set contrast, contrast value, EA default: 0x016 */
   
   U8X8_C(0x0ae),		                /* display off */