remove the un-maintained porting branches

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@572 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/stm3210/application.c

@@ -17,71 +17,94 @@
  */
 /*@{*/
 
+#include <board.h>
 #include <rtthread.h>
-#include "led.h"
 
-char thread_led1_stack[512];
-struct rt_thread thread_led1;
-static void rt_thread_entry_led1(void* parameter)
-{
-    /* init led configuration */
-    rt_hw_led_init();
-
-    while (1)
-    {
-        /* led on */
-        rt_kprintf("led1 on\r\n");
-        rt_hw_led_on(0);
-        rt_thread_delay(50); /* sleep 0.5 second and switch to other thread */
-
-        /* led off */
-        rt_kprintf("led1 off\r\n");
-        rt_hw_led_off(0);
-        rt_thread_delay(50);
-    }
-}
+#ifdef RT_USING_DFS
+/* dfs init */
+#include <dfs_init.h>
+/* dfs filesystem:ELM filesystem init */
+#include <dfs_elm.h>
+/* dfs Filesystem APIs */
+#include <dfs_fs.h>
+#endif
 
-char thread_led2_stack[512];
-struct rt_thread thread_led2;
-void rt_thread_entry_led2(void* parameter)
+#ifdef RT_USING_LWIP
+#include <lwip/sys.h>
+#include <lwip/api.h>
+#include <netif/ethernetif.h>
+#endif
+
+void rt_init_thread_entry(void* parameter)
 {
-    unsigned int count=0;
-    while (1)
-    {
-        /* led on */
-        rt_kprintf("led2 on,count : %d\r\n",count);
-        count++;
-        rt_hw_led_on(1);
-        rt_thread_delay(RT_TICK_PER_SECOND);
-
-        /* led off */
-        rt_kprintf("led2 off\r\n");
-        rt_hw_led_off(1);
-        rt_thread_delay(RT_TICK_PER_SECOND);
-    }
+/* Filesystem Initialization */
+#ifdef RT_USING_DFS
+	{
+		/* init the device filesystem */
+		dfs_init();
+
+#ifdef RT_USING_DFS_ELMFAT
+		/* init the elm chan FatFs filesystam*/
+		elm_init();
+
+		/* mount sd card fat partition 1 as root directory */
+		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
+		{
+			rt_kprintf("File System initialized!\n");
+		}
+		else
+			rt_kprintf("File System initialzation failed!\n");
+#endif
+	}
+#endif
+
+/* LwIP Initialization */
+#ifdef RT_USING_LWIP
+	{
+		extern void lwip_sys_init(void);
+
+		/* register ethernetif device */
+		eth_system_device_init();
+
+#ifdef STM32F10X_CL
+		rt_hw_stm32_eth_init();
+#else
+	/* STM32F103 */
+	#if STM32_ETH_IF == 0
+			rt_hw_enc28j60_init();
+	#elif STM32_ETH_IF == 1
+			rt_hw_dm9000_init();
+	#endif
+#endif
+
+		/* re-init device driver */
+		rt_device_init_all();
+
+		/* init lwip system */
+		lwip_sys_init();
+		rt_kprintf("TCP/IP initialized!\n");
+	}
+#endif
 }
 
 int rt_application_init()
 {
-    /* init led1 thread */
-    rt_thread_init(&thread_led1,
-                   "led1",
-                   rt_thread_entry_led1,
-                   RT_NULL,
-                   &thread_led1_stack[0],
-                   sizeof(thread_led1_stack),10,10);
-    rt_thread_startup(&thread_led1);
-
-    /* init led2 thread */
-    rt_thread_init(&thread_led2,
-                   "led2",
-                   rt_thread_entry_led2,
-                   RT_NULL,
-                   &thread_led2_stack[0],
-                   sizeof(thread_led2_stack),10,10);
-    rt_thread_startup(&thread_led2);
-
-    return 0;
+	rt_thread_t init_thread;
+
+#if (RT_THREAD_PRIORITY_MAX == 32)
+	init_thread = rt_thread_create("init",
+								rt_init_thread_entry, RT_NULL,
+								2048, 8, 20);
+#else
+	init_thread = rt_thread_create("init",
+								rt_init_thread_entry, RT_NULL,
+								2048, 80, 20);
+#endif
+
+	if (init_thread != RT_NULL)
+		rt_thread_startup(init_thread);
+
+	return 0;
 }
 
 /*@}*/

bsp/stm3210/project.Uv2

@@ -2,24 +2,30 @@
 ### Do not modify !
 
 Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-Target (RT-Thread STM32 Simulator), 0x0004 // Tools: 'ARM-ADS'
 
 Group (Startup)
 Group (StdPeriph_Driver)
 Group (CMSIS)
 Group (Kernel)
 Group (STM32)
+Group (finsh)
+Group (Filesystem)
+Group (LwIP)
 
 File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
 File 1,1,<.\board.c><board.c>
 File 1,1,<.\application.c><application.c>
 File 1,1,<.\startup.c><startup.c>
 File 1,1,<.\led.c><led.c>
+File 1,1,<.\usart.c><usart.c>
+File 1,1,<.\sdcard.c><sdcard.c>
+File 1,1,<.\msd.c><msd.c>
+File 1,1,<.\enc28j60.c><enc28j60.c>
+File 1,1,<.\dm9000a.c><dm9000a.c>
+File 1,1,<.\rtc.c><rtc.c>
 File 1,5,<.\rtconfig.h><rtconfig.h>
 File 1,5,<.\board.h><board.h>
-File 1,1,<.\usart.c><usart.c>
 File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
 File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
 File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
 File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
@@ -40,6 +46,7 @@ File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x
 File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
 File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
 File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
+File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
 File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
 File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
 File 4,1,<..\..\src\clock.c><clock.c>
@@ -59,10 +66,73 @@ File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
 File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
 File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
 File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
+File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
 File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
 File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
 File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
+File 6,1,<..\..\finsh\symbol.c><symbol.c>
+File 6,1,<..\..\finsh\cmd.c><cmd.c>
+File 6,1,<..\..\finsh\finsh_compiler.c><finsh_compiler.c>
+File 6,1,<..\..\finsh\finsh_error.c><finsh_error.c>
+File 6,1,<..\..\finsh\finsh_heap.c><finsh_heap.c>
+File 6,1,<..\..\finsh\finsh_init.c><finsh_init.c>
+File 6,1,<..\..\finsh\finsh_node.c><finsh_node.c>
+File 6,1,<..\..\finsh\finsh_ops.c><finsh_ops.c>
+File 6,1,<..\..\finsh\finsh_parser.c><finsh_parser.c>
+File 6,1,<..\..\finsh\finsh_token.c><finsh_token.c>
+File 6,1,<..\..\finsh\finsh_var.c><finsh_var.c>
+File 6,1,<..\..\finsh\finsh_vm.c><finsh_vm.c>
+File 6,1,<..\..\finsh\shell.c><shell.c>
+File 7,1,<..\..\filesystem\dfs\src\dfs_util.c><dfs_util.c>
+File 7,1,<..\..\filesystem\dfs\src\dfs_cache.c><dfs_cache.c>
+File 7,1,<..\..\filesystem\dfs\src\dfs_fs.c><dfs_fs.c>
+File 7,1,<..\..\filesystem\dfs\src\dfs_init.c><dfs_init.c>
+File 7,1,<..\..\filesystem\dfs\src\dfs_posix.c><dfs_posix.c>
+File 7,1,<..\..\filesystem\dfs\src\dfs_raw.c><dfs_raw.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\plibc.c><plibc.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\efs.c><efs.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\extract.c><extract.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\partition.c><partition.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ui.c><ui.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\dir.c><dir.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fat.c><fat.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\file.c><file.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fs.c><fs.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ls.c><ls.c>
+File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\time.c><time.c>
+File 8,1,<..\..\net\lwip\src\core\dhcp.c><dhcp.c>
+File 8,1,<..\..\net\lwip\src\core\dns.c><dns.c>
+File 8,1,<..\..\net\lwip\src\core\init.c><init.c>
+File 8,1,<..\..\net\lwip\src\core\memp.c><memp.c>
+File 8,1,<..\..\net\lwip\src\core\netif.c><netif.c>
+File 8,1,<..\..\net\lwip\src\core\pbuf.c><pbuf.c>
+File 8,1,<..\..\net\lwip\src\core\raw.c><raw.c>
+File 8,1,<..\..\net\lwip\src\core\stats.c><stats.c>
+File 8,1,<..\..\net\lwip\src\core\sys.c><sys.c>
+File 8,1,<..\..\net\lwip\src\core\tcp.c><tcp.c>
+File 8,1,<..\..\net\lwip\src\core\tcp_in.c><tcp_in.c>
+File 8,1,<..\..\net\lwip\src\core\tcp_out.c><tcp_out.c>
+File 8,1,<..\..\net\lwip\src\core\udp.c><udp.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\ip_frag.c><ip_frag.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\autoip.c><autoip.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\icmp.c><icmp.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\igmp.c><igmp.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\inet.c><inet.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\inet_chksum.c><inet_chksum.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\ip.c><ip.c>
+File 8,1,<..\..\net\lwip\src\core\ipv4\ip_addr.c><ip_addr.c>
+File 8,1,<..\..\net\lwip\src\api\tcpip.c><tcpip.c>
+File 8,1,<..\..\net\lwip\src\api\api_lib.c><api_lib.c>
+File 8,1,<..\..\net\lwip\src\api\api_msg.c><api_msg.c>
+File 8,1,<..\..\net\lwip\src\api\err.c><err.c>
+File 8,1,<..\..\net\lwip\src\api\netbuf.c><netbuf.c>
+File 8,1,<..\..\net\lwip\src\api\netdb.c><netdb.c>
+File 8,1,<..\..\net\lwip\src\api\netifapi.c><netifapi.c>
+File 8,1,<..\..\net\lwip\src\api\sockets.c><sockets.c>
+File 8,1,<..\..\net\lwip\src\netif\ethernetif.c><ethernetif.c>
+File 8,1,<..\..\net\lwip\src\netif\etharp.c><etharp.c>
+File 8,1,<..\..\net\lwip\src\arch\sys_arch_init.c><sys_arch_init.c>
+File 8,1,<..\..\net\lwip\src\arch\sys_arch.c><sys_arch.c>
 
 
 Options 1,0,0  // Target 'RT-Thread STM32'
@@ -123,7 +193,7 @@ Options 1,0,0  // Target 'RT-Thread STM32'
  ADSCMISC ()
  ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD,)
  ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32)
+ ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32;..\..\filesystem\dfs;..\..\filesystem\dfs\include;..\..\filesystem\dfs\filesystems\efsl\src\include;..\..\filesystem\dfs\filesystems\efsl\src\base\include;..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include;..\..\net\lwip\src;..\..\net\lwip\src\include;..\..\net\lwip\src\arch\include;..\..\net\lwip\src\include\ipv4;..\..\finsh)
  ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
  ADSAMISC ()
  ADSADEFN ()
@@ -144,104 +214,14 @@ Options 1,0,0  // Target 'RT-Thread STM32'
  ADSLDSC ()
  ADSLDIB ()
  ADSLDIC ()
- ADSLDMC ()
+ ADSLDMC (--keep __fsym_* --keep __vsym_*)
  ADSLDIF ()
  ADSLDDW ()
   OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
   OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
+ FLASH1 { 9,0,0,0,1,0,0,0,6,16,0,0,0,0,0,0,0,0,0,0 }
  FLASH2 (Segger\JL2CM3.dll)
  FLASH3 ("" ())
  FLASH4 ()
 EndOpt
 
-Options 2,0,0  // Target 'RT-Thread STM32 Simulator'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD, STM32_SIMULATOR)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC ()
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49149,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JLTAgdi.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project.ewp

@@ -285,6 +285,16 @@
           <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
           <state>$PROJ_DIR$\..\..\include</state>
           <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
+          <state>$PROJ_DIR$\..\..\finsh</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
         </option>
         <option>
           <name>CCStdIncCheck</name>
@@ -1079,6 +1089,16 @@
           <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
           <state>$PROJ_DIR$\..\..\include</state>
           <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
+          <state>$PROJ_DIR$\..\..\finsh</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
+          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
+          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
         </option>
         <option>
           <name>CCStdIncCheck</name>
@@ -1598,6 +1618,102 @@
       <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
     </file>
   </group>
+  <group>
+    <name>Filesystem</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_cache.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_fs.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_init.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_posix.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_raw.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_util.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\dir.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\efs.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\extract.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fat.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\file.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fs.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ls.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\partition.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\plibc.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\time.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ui.c</name>
+    </file>
+  </group>
+  <group>
+    <name>finsh</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\cmd.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_compiler.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_error.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_heap.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_init.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_node.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_ops.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_parser.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_token.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_var.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\finsh_vm.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\shell.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\finsh\symbol.c</name>
+    </file>
+  </group>
   <group>
     <name>Kernel</name>
     <file>
@@ -1640,6 +1756,108 @@
       <name>$PROJ_DIR$\..\..\src\timer.c</name>
     </file>
   </group>
+  <group>
+    <name>LwIP</name>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_lib.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_msg.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\autoip.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dhcp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dns.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\err.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\etharp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\ethernetif.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\icmp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\igmp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet_chksum.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\init.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_addr.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_frag.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\memp_tiny.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netbuf.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netdb.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\netif.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netifapi.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\pbuf.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\raw.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\sockets.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\stats.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\sys.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch_init.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_in.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_out.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\api\tcpip.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\net\lwip\src\core\udp.c</name>
+    </file>
+  </group>
   <group>
     <name>Startup</name>
     <file>
@@ -1648,18 +1866,39 @@
     <file>
       <name>$PROJ_DIR$\board.c</name>
     </file>
+    <file>
+      <name>$PROJ_DIR$\board.h</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\dm9000a.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\enc28j60.c</name>
+    </file>
     <file>
       <name>$PROJ_DIR$\led.c</name>
     </file>
+    <file>
+      <name>$PROJ_DIR$\msd.c</name>
+    </file>
+    <file>
+      <name>$PROJ_DIR$\rtc.c</name>
+    </file>
     <file>
       <name>$PROJ_DIR$\rtconfig.h</name>
     </file>
+    <file>
+      <name>$PROJ_DIR$\sdcard.c</name>
+    </file>
     <file>
       <name>$PROJ_DIR$\startup.c</name>
     </file>
     <file>
       <name>$PROJ_DIR$\stm32f10x_it.c</name>
     </file>
+    <file>
+      <name>$PROJ_DIR$\usart.c</name>
+    </file>
   </group>
   <group>
     <name>StdPeriph_Driver</name>
@@ -1747,6 +1986,9 @@
     <file>
       <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
     </file>
+    <file>
+      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
+    </file>
     <file>
       <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
     </file>

bsp/stm3210/project_107/application.c

@@ -1,110 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <board.h>
-#include <rtthread.h>
-
-#ifdef RT_USING_DFS
-/* dfs init */
-#include <dfs_init.h>
-/* dfs filesystem:ELM filesystem init */
-#include <dfs_elm.h>
-/* dfs Filesystem APIs */
-#include <dfs_fs.h>
-#endif
-
-#ifdef RT_USING_LWIP
-#include <lwip/sys.h>
-#include <lwip/api.h>
-#include <netif/ethernetif.h>
-#endif
-
-void rt_init_thread_entry(void* parameter)
-{
-/* Filesystem Initialization */
-#ifdef RT_USING_DFS
-	{
-		/* init the device filesystem */
-		dfs_init();
-
-#ifdef RT_USING_DFS_ELMFAT
-		/* init the elm chan FatFs filesystam*/
-		elm_init();
-
-		/* mount sd card fat partition 1 as root directory */
-		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
-		{
-			rt_kprintf("File System initialized!\n");
-		}
-		else
-			rt_kprintf("File System initialzation failed!\n");
-#endif
-	}
-#endif
-
-/* LwIP Initialization */
-#ifdef RT_USING_LWIP
-	{
-		extern void lwip_sys_init(void);
-
-		/* register ethernetif device */
-		eth_system_device_init();
-
-#ifdef STM32F10X_CL
-		rt_hw_stm32_eth_init();
-#else
-	/* STM32F103 */
-	#if STM32_ETH_IF == 0
-			rt_hw_enc28j60_init();
-	#elif STM32_ETH_IF == 1
-			rt_hw_dm9000_init();
-	#endif
-#endif
-
-		/* re-init device driver */
-		rt_device_init_all();
-
-		/* init lwip system */
-		lwip_sys_init();
-		rt_kprintf("TCP/IP initialized!\n");
-	}
-#endif
-}
-
-int rt_application_init()
-{
-	rt_thread_t init_thread;
-
-#if (RT_THREAD_PRIORITY_MAX == 32)
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 8, 20);
-#else
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 80, 20);
-#endif
-
-	if (init_thread != RT_NULL)
-		rt_thread_startup(init_thread);
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_107/board.h

@@ -1,75 +0,0 @@
-/*
- * File      : board.h
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2009, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-09-22     Bernard      add board.h to this bsp
- */
-
-// <<< Use Configuration Wizard in Context Menu >>>
-#ifndef __BOARD_H__
-#define __BOARD_H__
-
-/* board configuration */
-// <o> SDCard Driver <1=>SDIO sdcard <0=>SPI MMC card
-// 	<i>Default: 1
-#define STM32_USE_SDIO			0
-
-/* whether use board external SRAM memory */
-// <e>Use external SRAM memory on the board
-// 	<i>Enable External SRAM memory
-#define STM32_EXT_SRAM          0
-//	<o>Begin Address of External SRAM
-//		<i>Default: 0x68000000
-#define STM32_EXT_SRAM_BEGIN    0x68000000 /* the begining address of external SRAM */
-//	<o>End Address of External SRAM
-//		<i>Default: 0x68080000
-#define STM32_EXT_SRAM_END      0x68080000 /* the end address of external SRAM */
-// </e>
-
-// <o> Internal SRAM memory size[Kbytes] <8-64>
-//	<i>Default: 64
-#define STM32_SRAM_SIZE         64
-#define STM32_SRAM_END          (0x20000000 + STM32_SRAM_SIZE * 1024)
-
-// <o> Console on USART: <0=> no console <1=>USART 1 <2=>USART 2 <3=> USART 3
-// 	<i>Default: 1
-#define STM32_CONSOLE_USART		2
-
-// <o> Ethernet Interface: <0=> Microchip ENC28J60 <1=> Davicom DM9000A
-// 	<i>Default: 0
-#define STM32_ETH_IF			0
-
-void rt_hw_board_led_on(int n);
-void rt_hw_board_led_off(int n);
-void rt_hw_board_init(void);
-
-#if STM32_CONSOLE_USART == 0
-#define CONSOLE_DEVICE "no"
-#elif STM32_CONSOLE_USART == 1
-#define CONSOLE_DEVICE "uart1"
-#elif STM32_CONSOLE_USART == 2
-#define CONSOLE_DEVICE "uart2"
-#elif STM32_CONSOLE_USART == 3
-#define CONSOLE_DEVICE "uart3"
-#endif
-
-void rt_hw_usart_init(void);
-
-/* SD Card init function */
-void rt_hw_sdcard_init(void);
-void rt_hw_msd_init(void);
-
-/* ETH interface init function */
-void rt_hw_enc28j60_init(void);
-void rt_hw_dm9000_init(void);
-
-#endif
-
-// <<< Use Configuration Wizard in Context Menu >>>

bsp/stm3210/project_107/msd.c

@@ -1,937 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : msd.c
-* Author             : MCD Application Team
-* Version            : V2.1
-* Date               : 05/30/2008
-* Description        : MSD card driver source file.
-*                      Pin assignment:
-*             ----------------------------------------------
-*             |  STM32F10x    |     MSD          Pin        |
-*             ----------------------------------------------
-*             | P0.4          |   ChipSelect      1         |
-*             | P0.1 / MOSI   |   DataIn          2         |
-*             |               |   GND             3 (0 V)   |
-*             |               |   VDD             4 (3.3 V) |
-*             | P0.2 / SCLK   |   Clock           5         |
-*             |               |   GND             6 (0 V)   |
-*             | P0.0 / MISO   |   DataOut         7         |
-*             -----------------------------------------------
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-* FOR MORE INFORMATION PLEASE CAREFULLY READ THE LICENSE AGREEMENT FILE LOCATED
-* IN THE ROOT DIRECTORY OF THIS FIRMWARE PACKAGE.
-*******************************************************************************/
-
-/* Includes ------------------------------------------------------------------*/
-#include "msd.h"
-#include <stm32f10x_spi.h>
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Select MSD Card: ChipSelect pin low  */
-#define MSD_CS_LOW()     GPIO_ResetBits(GPIOC, GPIO_Pin_7)
-/* Deselect MSD Card: ChipSelect pin high */
-#define MSD_CS_HIGH()    GPIO_SetBits(GPIOC, GPIO_Pin_7)
-/* MSD Card SPI */
-#define MSD_SPI			SPI3
-
-/* Private function prototypes -----------------------------------------------*/
-static void SPI_Config(void);
-/* Private functions ---------------------------------------------------------*/
-
-/*******************************************************************************
-* Function Name  : MSD_Init
-* Description    : Initializes the MSD/SD communication.
-* Input          : None
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_Init(void)
-{
-  u32 i = 0;
-
-  /* Initialize SPI */
-  SPI_Config();
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte 0xFF, 10 times with CS high*/
-  /* rise CS and MOSI for 80 clocks cycles */
-  for (i = 0; i <= 9; i++)
-  {
-    /* Send dummy byte 0xFF */
-    MSD_WriteByte(DUMMY);
-  }
-  /*------------Put MSD in SPI mode--------------*/
-  /* MSD initialized and set to SPI mode properly */
-  return (MSD_GoIdleState());
-}
-
-/*******************************************************************************
-* Function Name  : MSD_WriteBlock
-* Description    : Writes a block on the MSD
-* Input          : - pBuffer : pointer to the buffer containing the data to be
-*                    written on the MSD.
-*                  - WriteAddr : address to write on.
-*                  - NumByteToWrite: number of data to write
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_WriteBlock(u8* pBuffer, u32 WriteAddr, u16 NumByteToWrite)
-{
-  u32 i = 0;
-  u8 rvalue = MSD_RESPONSE_FAILURE;
-
-  /* MSD chip select low */
-  MSD_CS_LOW();
-  /* Send CMD24 (MSD_WRITE_BLOCK) to write multiple block */
-  MSD_SendCmd(MSD_WRITE_BLOCK, WriteAddr, 0xFF);
-
-  /* Check if the MSD acknowledged the write block command: R1 response (0x00: no errors) */
-  if (!MSD_GetResponse(MSD_RESPONSE_NO_ERROR))
-  {
-    /* Send a dummy byte */
-    MSD_WriteByte(DUMMY);
-    /* Send the data token to signify the start of the data */
-    MSD_WriteByte(0xFE);
-    /* Write the block data to MSD : write count data by block */
-    for (i = 0; i < NumByteToWrite; i++)
-    {
-      /* Send the pointed byte */
-      MSD_WriteByte(*pBuffer);
-      /* Point to the next location where the byte read will be saved */
-      pBuffer++;
-    }
-    /* Put CRC bytes (not really needed by us, but required by MSD) */
-    MSD_ReadByte();
-    MSD_ReadByte();
-    /* Read data response */
-    if (MSD_GetDataResponse() == MSD_DATA_OK)
-    {
-      rvalue = MSD_RESPONSE_NO_ERROR;
-    }
-  }
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte: 8 Clock pulses of delay */
-  MSD_WriteByte(DUMMY);
-  /* Returns the reponse */
-  return rvalue;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_ReadBlock
-* Description    : Reads a block of data from the MSD.
-* Input          : - pBuffer : pointer to the buffer that receives the data read
-*                    from the MSD.
-*                  - ReadAddr : MSD's internal address to read from.
-*                  - NumByteToRead : number of bytes to read from the MSD.
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_ReadBlock(u8* pBuffer, u32 ReadAddr, u16 NumByteToRead)
-{
-  u32 i = 0;
-  u8 rvalue = MSD_RESPONSE_FAILURE;
-
-  /* MSD chip select low */
-  MSD_CS_LOW();
-  /* Send CMD17 (MSD_READ_SINGLE_BLOCK) to read one block */
-  MSD_SendCmd(MSD_READ_SINGLE_BLOCK, ReadAddr, 0xFF);
-
-  /* Check if the MSD acknowledged the read block command: R1 response (0x00: no errors) */
-  if (!MSD_GetResponse(MSD_RESPONSE_NO_ERROR))
-  {
-    /* Now look for the data token to signify the start of the data */
-    if (!MSD_GetResponse(MSD_START_DATA_SINGLE_BLOCK_READ))
-    {
-      /* Read the MSD block data : read NumByteToRead data */
-      for (i = 0; i < NumByteToRead; i++)
-      {
-        /* Save the received data */
-        *pBuffer = MSD_ReadByte();
-        /* Point to the next location where the byte read will be saved */
-        pBuffer++;
-      }
-      /* Get CRC bytes (not really needed by us, but required by MSD) */
-      MSD_ReadByte();
-      MSD_ReadByte();
-      /* Set response value to success */
-      rvalue = MSD_RESPONSE_NO_ERROR;
-    }
-  }
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte: 8 Clock pulses of delay */
-  MSD_WriteByte(DUMMY);
-  /* Returns the reponse */
-  return rvalue;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_WriteBuffer
-* Description    : Writes many blocks on the MSD
-* Input          : - pBuffer : pointer to the buffer containing the data to be
-*                    written on the MSD.
-*                  - WriteAddr : address to write on.
-*                  - NumByteToWrite: number of data to write
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_WriteBuffer(u8* pBuffer, u32 WriteAddr, u32 NumByteToWrite)
-{
-  u32 i = 0, NbrOfBlock = 0, Offset = 0;
-  u8 rvalue = MSD_RESPONSE_FAILURE;
-
-  /* Calculate number of blocks to write */
-  NbrOfBlock = NumByteToWrite / BLOCK_SIZE;
-  /* MSD chip select low */
-  MSD_CS_LOW();
-
-  /* Data transfer */
-  while (NbrOfBlock --)
-  {
-    /* Send CMD24 (MSD_WRITE_BLOCK) to write blocks */
-    MSD_SendCmd(MSD_WRITE_BLOCK, WriteAddr + Offset, 0xFF);
-
-    /* Check if the MSD acknowledged the write block command: R1 response (0x00: no errors) */
-    if (MSD_GetResponse(MSD_RESPONSE_NO_ERROR))
-    {
-      return MSD_RESPONSE_FAILURE;
-    }
-    /* Send dummy byte */
-    MSD_WriteByte(DUMMY);
-    /* Send the data token to signify the start of the data */
-    MSD_WriteByte(MSD_START_DATA_SINGLE_BLOCK_WRITE);
-    /* Write the block data to MSD : write count data by block */
-    for (i = 0; i < BLOCK_SIZE; i++)
-    {
-      /* Send the pointed byte */
-      MSD_WriteByte(*pBuffer);
-      /* Point to the next location where the byte read will be saved */
-      pBuffer++;
-    }
-    /* Set next write address */
-    Offset += 512;
-    /* Put CRC bytes (not really needed by us, but required by MSD) */
-    MSD_ReadByte();
-    MSD_ReadByte();
-    /* Read data response */
-    if (MSD_GetDataResponse() == MSD_DATA_OK)
-    {
-      /* Set response value to success */
-      rvalue = MSD_RESPONSE_NO_ERROR;
-    }
-    else
-    {
-      /* Set response value to failure */
-      rvalue = MSD_RESPONSE_FAILURE;
-    }
-  }
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte: 8 Clock pulses of delay */
-  MSD_WriteByte(DUMMY);
-  /* Returns the reponse */
-  return rvalue;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_ReadBuffer
-* Description    : Reads multiple block of data from the MSD.
-* Input          : - pBuffer : pointer to the buffer that receives the data read
-*                    from the MSD.
-*                  - ReadAddr : MSD's internal address to read from.
-*                  - NumByteToRead : number of bytes to read from the MSD.
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_ReadBuffer(u8* pBuffer, u32 ReadAddr, u32 NumByteToRead)
-{
-  u32 i = 0, NbrOfBlock = 0, Offset = 0;
-  u8 rvalue = MSD_RESPONSE_FAILURE;
-
-  /* Calculate number of blocks to read */
-  NbrOfBlock = NumByteToRead / BLOCK_SIZE;
-  /* MSD chip select low */
-  MSD_CS_LOW();
-
-  /* Data transfer */
-  while (NbrOfBlock --)
-  {
-    /* Send CMD17 (MSD_READ_SINGLE_BLOCK) to read one block */
-    MSD_SendCmd (MSD_READ_SINGLE_BLOCK, ReadAddr + Offset, 0xFF);
-    /* Check if the MSD acknowledged the read block command: R1 response (0x00: no errors) */
-    if (MSD_GetResponse(MSD_RESPONSE_NO_ERROR))
-    {
-      return  MSD_RESPONSE_FAILURE;
-    }
-    /* Now look for the data token to signify the start of the data */
-    if (!MSD_GetResponse(MSD_START_DATA_SINGLE_BLOCK_READ))
-    {
-      /* Read the MSD block data : read NumByteToRead data */
-      for (i = 0; i < BLOCK_SIZE; i++)
-      {
-        /* Read the pointed data */
-        *pBuffer = MSD_ReadByte();
-        /* Point to the next location where the byte read will be saved */
-        pBuffer++;
-      }
-      /* Set next read address*/
-      Offset += 512;
-      /* get CRC bytes (not really needed by us, but required by MSD) */
-      MSD_ReadByte();
-      MSD_ReadByte();
-      /* Set response value to success */
-      rvalue = MSD_RESPONSE_NO_ERROR;
-    }
-    else
-    {
-      /* Set response value to failure */
-      rvalue = MSD_RESPONSE_FAILURE;
-    }
-  }
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte: 8 Clock pulses of delay */
-  MSD_WriteByte(DUMMY);
-  /* Returns the reponse */
-  return rvalue;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_GetCSDRegister
-* Description    : Read the CSD card register.
-*                  Reading the contents of the CSD register in SPI mode
-*                  is a simple read-block transaction.
-* Input          : - MSD_csd: pointer on an SCD register structure
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_GetCSDRegister(sMSD_CSD* MSD_csd)
-{
-  u32 i = 0;
-  u8 rvalue = MSD_RESPONSE_FAILURE;
-  u8 CSD_Tab[16];
-
-  /* MSD chip select low */
-  MSD_CS_LOW();
-  /* Send CMD9 (CSD register) or CMD10(CSD register) */
-  MSD_SendCmd(MSD_SEND_CSD, 0, 0xFF);
-
-  /* Wait for response in the R1 format (0x00 is no errors) */
-  if (!MSD_GetResponse(MSD_RESPONSE_NO_ERROR))
-  {
-    if (!MSD_GetResponse(MSD_START_DATA_SINGLE_BLOCK_READ))
-    {
-      for (i = 0; i < 16; i++)
-      {
-        /* Store CSD register value on CSD_Tab */
-        CSD_Tab[i] = MSD_ReadByte();
-      }
-    }
-    /* Get CRC bytes (not really needed by us, but required by MSD) */
-    MSD_WriteByte(DUMMY);
-    MSD_WriteByte(DUMMY);
-    /* Set response value to success */
-    rvalue = MSD_RESPONSE_NO_ERROR;
-  }
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte: 8 Clock pulses of delay */
-  MSD_WriteByte(DUMMY);
-
-  /* Byte 0 */
-  MSD_csd->CSDStruct = (CSD_Tab[0] & 0xC0) >> 6;
-  MSD_csd->SysSpecVersion = (CSD_Tab[0] & 0x3C) >> 2;
-  MSD_csd->Reserved1 = CSD_Tab[0] & 0x03;
-  /* Byte 1 */
-  MSD_csd->TAAC = CSD_Tab[1] ;
-  /* Byte 2 */
-  MSD_csd->NSAC = CSD_Tab[2];
-  /* Byte 3 */
-  MSD_csd->MaxBusClkFrec = CSD_Tab[3];
-  /* Byte 4 */
-  MSD_csd->CardComdClasses = CSD_Tab[4] << 4;
-  /* Byte 5 */
-  MSD_csd->CardComdClasses |= (CSD_Tab[5] & 0xF0) >> 4;
-  MSD_csd->RdBlockLen = CSD_Tab[5] & 0x0F;
-  /* Byte 6 */
-  MSD_csd->PartBlockRead = (CSD_Tab[6] & 0x80) >> 7;
-  MSD_csd->WrBlockMisalign = (CSD_Tab[6] & 0x40) >> 6;
-  MSD_csd->RdBlockMisalign = (CSD_Tab[6] & 0x20) >> 5;
-  MSD_csd->DSRImpl = (CSD_Tab[6] & 0x10) >> 4;
-  MSD_csd->Reserved2 = 0; /* Reserved */
-  MSD_csd->DeviceSize = (CSD_Tab[6] & 0x03) << 10;
-  /* Byte 7 */
-  MSD_csd->DeviceSize |= (CSD_Tab[7]) << 2;
-  /* Byte 8 */
-  MSD_csd->DeviceSize |= (CSD_Tab[8] & 0xC0) >> 6;
-  MSD_csd->MaxRdCurrentVDDMin = (CSD_Tab[8] & 0x38) >> 3;
-  MSD_csd->MaxRdCurrentVDDMax = (CSD_Tab[8] & 0x07);
-  /* Byte 9 */
-  MSD_csd->MaxWrCurrentVDDMin = (CSD_Tab[9] & 0xE0) >> 5;
-  MSD_csd->MaxWrCurrentVDDMax = (CSD_Tab[9] & 0x1C) >> 2;
-  MSD_csd->DeviceSizeMul = (CSD_Tab[9] & 0x03) << 1;
-  /* Byte 10 */
-  MSD_csd->DeviceSizeMul |= (CSD_Tab[10] & 0x80) >> 7;
-  MSD_csd->EraseGrSize = (CSD_Tab[10] & 0x7C) >> 2;
-  MSD_csd->EraseGrMul = (CSD_Tab[10] & 0x03) << 3;
-  /* Byte 11 */
-  MSD_csd->EraseGrMul |= (CSD_Tab[11] & 0xE0) >> 5;
-  MSD_csd->WrProtectGrSize = (CSD_Tab[11] & 0x1F);
-  /* Byte 12 */
-  MSD_csd->WrProtectGrEnable = (CSD_Tab[12] & 0x80) >> 7;
-  MSD_csd->ManDeflECC = (CSD_Tab[12] & 0x60) >> 5;
-  MSD_csd->WrSpeedFact = (CSD_Tab[12] & 0x1C) >> 2;
-  MSD_csd->MaxWrBlockLen = (CSD_Tab[12] & 0x03) << 2;
-  /* Byte 13 */
-  MSD_csd->MaxWrBlockLen |= (CSD_Tab[13] & 0xc0) >> 6;
-  MSD_csd->WriteBlockPaPartial = (CSD_Tab[13] & 0x20) >> 5;
-  MSD_csd->Reserved3 = 0;
-  MSD_csd->ContentProtectAppli = (CSD_Tab[13] & 0x01);
-  /* Byte 14 */
-  MSD_csd->FileFormatGrouop = (CSD_Tab[14] & 0x80) >> 7;
-  MSD_csd->CopyFlag = (CSD_Tab[14] & 0x40) >> 6;
-  MSD_csd->PermWrProtect = (CSD_Tab[14] & 0x20) >> 5;
-  MSD_csd->TempWrProtect = (CSD_Tab[14] & 0x10) >> 4;
-  MSD_csd->FileFormat = (CSD_Tab[14] & 0x0C) >> 2;
-  MSD_csd->ECC = (CSD_Tab[14] & 0x03);
-  /* Byte 15 */
-  MSD_csd->msd_CRC = (CSD_Tab[15] & 0xFE) >> 1;
-  MSD_csd->Reserved4 = 1;
-
-  /* Return the reponse */
-  return rvalue;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_GetCIDRegister
-* Description    : Read the CID card register.
-*                  Reading the contents of the CID register in SPI mode
-*                  is a simple read-block transaction.
-* Input          : - MSD_cid: pointer on an CID register structure
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_GetCIDRegister(sMSD_CID* MSD_cid)
-{
-  u32 i = 0;
-  u8 rvalue = MSD_RESPONSE_FAILURE;
-  u8 CID_Tab[16];
-
-  /* MSD chip select low */
-  MSD_CS_LOW();
-  /* Send CMD10 (CID register) */
-  MSD_SendCmd(MSD_SEND_CID, 0, 0xFF);
-
-  /* Wait for response in the R1 format (0x00 is no errors) */
-  if (!MSD_GetResponse(MSD_RESPONSE_NO_ERROR))
-  {
-    if (!MSD_GetResponse(MSD_START_DATA_SINGLE_BLOCK_READ))
-    {
-      /* Store CID register value on CID_Tab */
-      for (i = 0; i < 16; i++)
-      {
-        CID_Tab[i] = MSD_ReadByte();
-      }
-    }
-    /* Get CRC bytes (not really needed by us, but required by MSD) */
-    MSD_WriteByte(DUMMY);
-    MSD_WriteByte(DUMMY);
-    /* Set response value to success */
-    rvalue = MSD_RESPONSE_NO_ERROR;
-  }
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte: 8 Clock pulses of delay */
-  MSD_WriteByte(DUMMY);
-
-  /* Byte 0 */
-  MSD_cid->ManufacturerID = CID_Tab[0];
-  /* Byte 1 */
-  MSD_cid->OEM_AppliID = CID_Tab[1] << 8;
-  /* Byte 2 */
-  MSD_cid->OEM_AppliID |= CID_Tab[2];
-  /* Byte 3 */
-  MSD_cid->ProdName1 = CID_Tab[3] << 24;
-  /* Byte 4 */
-  MSD_cid->ProdName1 |= CID_Tab[4] << 16;
-  /* Byte 5 */
-  MSD_cid->ProdName1 |= CID_Tab[5] << 8;
-  /* Byte 6 */
-  MSD_cid->ProdName1 |= CID_Tab[6];
-  /* Byte 7 */
-  MSD_cid->ProdName2 = CID_Tab[7];
-  /* Byte 8 */
-  MSD_cid->ProdRev = CID_Tab[8];
-  /* Byte 9 */
-  MSD_cid->ProdSN = CID_Tab[9] << 24;
-  /* Byte 10 */
-  MSD_cid->ProdSN |= CID_Tab[10] << 16;
-  /* Byte 11 */
-  MSD_cid->ProdSN |= CID_Tab[11] << 8;
-  /* Byte 12 */
-  MSD_cid->ProdSN |= CID_Tab[12];
-  /* Byte 13 */
-  MSD_cid->Reserved1 |= (CID_Tab[13] & 0xF0) >> 4;
-  /* Byte 14 */
-  MSD_cid->ManufactDate = (CID_Tab[13] & 0x0F) << 8;
-  /* Byte 15 */
-  MSD_cid->ManufactDate |= CID_Tab[14];
-  /* Byte 16 */
-  MSD_cid->msd_CRC = (CID_Tab[15] & 0xFE) >> 1;
-  MSD_cid->Reserved2 = 1;
-
-  /* Return the reponse */
-  return rvalue;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_SendCmd
-* Description    : Send 5 bytes command to the MSD card.
-* Input          : - Cmd: the user expected command to send to MSD card
-*                  - Arg: the command argument
-*                  - Crc: the CRC
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void MSD_SendCmd(u8 Cmd, u32 Arg, u8 Crc)
-{
-  u32 i = 0x00;
-  u8 Frame[6];
-
-  /* Construct byte1 */
-  Frame[0] = (Cmd | 0x40);
-  /* Construct byte2 */
-  Frame[1] = (u8)(Arg >> 24);
-  /* Construct byte3 */
-  Frame[2] = (u8)(Arg >> 16);
-  /* Construct byte4 */
-  Frame[3] = (u8)(Arg >> 8);
-  /* Construct byte5 */
-  Frame[4] = (u8)(Arg);
-  /* Construct CRC: byte6 */
-  Frame[5] = (Crc);
-
-  /* Send the Cmd bytes */
-  for (i = 0; i < 6; i++)
-  {
-    MSD_WriteByte(Frame[i]);
-  }
-}
-
-/*******************************************************************************
-* Function Name  : MSD_GetDataResponse
-* Description    : Get MSD card data response.
-* Input          : None
-* Output         : None
-* Return         : The MSD status: Read data response xxx0<status>1
-*                   - status 010: Data accecpted
-*                   - status 101: Data rejected due to a crc error
-*                   - status 110: Data rejected due to a Write error.
-*                   - status 111: Data rejected due to other error.
-*******************************************************************************/
-u8 MSD_GetDataResponse(void)
-{
-  u32 i = 0;
-  u8 response, rvalue;
-
-  while (i <= 64)
-  {
-    /* Read resonse */
-    response = MSD_ReadByte();
-    /* Mask unused bits */
-    response &= 0x1F;
-
-    switch (response)
-    {
-      case MSD_DATA_OK:
-      {
-        rvalue = MSD_DATA_OK;
-        break;
-      }
-
-      case MSD_DATA_CRC_ERROR:
-        return MSD_DATA_CRC_ERROR;
-
-      case MSD_DATA_WRITE_ERROR:
-        return MSD_DATA_WRITE_ERROR;
-
-      default:
-      {
-        rvalue = MSD_DATA_OTHER_ERROR;
-        break;
-      }
-    }
-    /* Exit loop in case of data ok */
-    if (rvalue == MSD_DATA_OK)
-      break;
-    /* Increment loop counter */
-    i++;
-  }
-  /* Wait null data */
-  while (MSD_ReadByte() == 0);
-  /* Return response */
-  return response;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_GetResponse
-* Description    : Returns the MSD response.
-* Input          : None
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_GetResponse(u8 Response)
-{
-  u32 Count = 0xFFF;
-
-  /* Check if response is got or a timeout is happen */
-  while ((MSD_ReadByte() != Response) && Count)
-  {
-    Count--;
-  }
-
-  if (Count == 0)
-  {
-    /* After time out */
-    return MSD_RESPONSE_FAILURE;
-  }
-  else
-  {
-    /* Right response got */
-    return MSD_RESPONSE_NO_ERROR;
-  }
-}
-
-/*******************************************************************************
-* Function Name  : MSD_GetStatus
-* Description    : Returns the MSD status.
-* Input          : None
-* Output         : None
-* Return         : The MSD status.
-*******************************************************************************/
-u16 MSD_GetStatus(void)
-{
-  u16 Status = 0;
-
-  /* MSD chip select low */
-  MSD_CS_LOW();
-  /* Send CMD13 (MSD_SEND_STATUS) to get MSD status */
-  MSD_SendCmd(MSD_SEND_STATUS, 0, 0xFF);
-
-  Status = MSD_ReadByte();
-  Status |= (u16)(MSD_ReadByte() << 8);
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte 0xFF */
-  MSD_WriteByte(DUMMY);
-
-  return Status;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_GoIdleState
-* Description    : Put MSD in Idle state.
-* Input          : None
-* Output         : None
-* Return         : The MSD Response: - MSD_RESPONSE_FAILURE: Sequence failed
-*                                    - MSD_RESPONSE_NO_ERROR: Sequence succeed
-*******************************************************************************/
-u8 MSD_GoIdleState(void)
-{
-  /* MSD chip select low */
-  MSD_CS_LOW();
-  /* Send CMD0 (GO_IDLE_STATE) to put MSD in SPI mode */
-  MSD_SendCmd(MSD_GO_IDLE_STATE, 0, 0x95);
-
-  /* Wait for In Idle State Response (R1 Format) equal to 0x01 */
-  if (MSD_GetResponse(MSD_IN_IDLE_STATE))
-  {
-    /* No Idle State Response: return response failue */
-    return MSD_RESPONSE_FAILURE;
-  }
-  /*----------Activates the card initialization process-----------*/
-  do
-  {
-    /* MSD chip select high */
-    MSD_CS_HIGH();
-    /* Send Dummy byte 0xFF */
-    MSD_WriteByte(DUMMY);
-
-    /* MSD chip select low */
-    MSD_CS_LOW();
-
-    /* Send CMD1 (Activates the card process) until response equal to 0x0 */
-    MSD_SendCmd(MSD_SEND_OP_COND, 0, 0xFF);
-    /* Wait for no error Response (R1 Format) equal to 0x00 */
-  }
-  while (MSD_GetResponse(MSD_RESPONSE_NO_ERROR));
-
-  /* MSD chip select high */
-  MSD_CS_HIGH();
-  /* Send dummy byte 0xFF */
-  MSD_WriteByte(DUMMY);
-
-  return MSD_RESPONSE_NO_ERROR;
-}
-
-/*******************************************************************************
-* Function Name  : MSD_WriteByte
-* Description    : Write a byte on the MSD.
-* Input          : Data: byte to send.
-* Output         : None
-* Return         : None.
-*******************************************************************************/
-void MSD_WriteByte(u8 Data)
-{
-  /* Wait until the transmit buffer is empty */
-  while (SPI_I2S_GetFlagStatus(MSD_SPI, SPI_I2S_FLAG_TXE) == RESET);
-  /* Send the byte */
-  SPI_I2S_SendData(MSD_SPI, Data);
-}
-
-/*******************************************************************************
-* Function Name  : MSD_ReadByte
-* Description    : Read a byte from the MSD.
-* Input          : None.
-* Output         : None
-* Return         : The received byte.
-*******************************************************************************/
-u8 MSD_ReadByte(void)
-{
-  u8 Data = 0;
-
-  /* Wait until the transmit buffer is empty */
-  while (SPI_I2S_GetFlagStatus(MSD_SPI, SPI_I2S_FLAG_TXE) == RESET);
-  /* Send the byte */
-  SPI_I2S_SendData(MSD_SPI, DUMMY);
-
-  /* Wait until a data is received */
-  while (SPI_I2S_GetFlagStatus(MSD_SPI, SPI_I2S_FLAG_RXNE) == RESET);
-  /* Get the received data */
-  Data = SPI_I2S_ReceiveData(MSD_SPI);
-
-  /* Return the shifted data */
-  return Data;
-}
-
-/*******************************************************************************
-* Function Name  : SPI_Config
-* Description    : Initializes the SPI and CS pins.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void SPI_Config(void)
-{
-  uint32_t delay;
-  GPIO_InitTypeDef  GPIO_InitStructure;
-  SPI_InitTypeDef   SPI_InitStructure;
-
-  /* GPIOC Periph clock enable */
-  RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOC | RCC_APB2Periph_AFIO, ENABLE);
-  /* remap SPI3 */
-  GPIO_PinRemapConfig(GPIO_Remap_SPI3, ENABLE);
-
-  /* SPI Periph clock enable */
-  RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI3, ENABLE);
-
-  /* Configure SPI3 pins: SCK, MISO and MOSI */
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10 | GPIO_Pin_11 | GPIO_Pin_12;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-  GPIO_Init(GPIOC, &GPIO_InitStructure);
-
-  /* Configure PC7 pin: CS pin */
-  GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7;
-  GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-  GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
-  GPIO_Init(GPIOC, &GPIO_InitStructure);
-
-  /* SPI3 Config */
-  SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
-  SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
-  SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
-  SPI_InitStructure.SPI_CPOL = SPI_CPOL_High;
-  SPI_InitStructure.SPI_CPHA = SPI_CPHA_2Edge;
-  SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
-  SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
-  SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-  SPI_InitStructure.SPI_CRCPolynomial = 7;
-  SPI_Init(MSD_SPI, &SPI_InitStructure);
-
-  /* SPI enable */
-  SPI_Cmd(MSD_SPI, ENABLE);
-
-  for(delay = 0; delay < 0xfffff; delay++);
-}
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/
-
-/*
- * RT-Thread SD Card Driver
- * 20090417 Bernard
- */
-#include <rtthread.h>
-#include <dfs_fs.h>
-
-static struct rt_device sdcard_device;
-static struct dfs_partition part;
-#define SECTOR_SIZE 512
-
-/* RT-Thread Device Driver Interface */
-static rt_err_t rt_msd_init(rt_device_t dev)
-{
-	sMSD_CSD MSD_csd;
-
-	MSD_GetCSDRegister(&MSD_csd);
-
-	return RT_EOK;
-}
-
-static rt_err_t rt_msd_open(rt_device_t dev, rt_uint16_t oflag)
-{
-	return RT_EOK;
-}
-
-static rt_err_t rt_msd_close(rt_device_t dev)
-{
-	return RT_EOK;
-}
-
-static rt_size_t rt_msd_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
-{
-	rt_uint8_t status;
-	rt_uint32_t i;
-
-	status = MSD_RESPONSE_NO_ERROR;
-	// rt_kprintf("read: 0x%x, size %d\n", pos, size);
-
-	/* read all sectors */
-	for (i = 0; i < size / SECTOR_SIZE; i ++)
-	{
-		status = MSD_ReadBlock((rt_uint8_t*)((rt_uint8_t*)buffer + i * SECTOR_SIZE),
-			(part.offset + i)* SECTOR_SIZE + pos,
-			SECTOR_SIZE);
-		if (status != MSD_RESPONSE_NO_ERROR)
-		{
-			rt_kprintf("sd card read failed\n");
-			return 0;
-		}
-	}
-
-	if (status == MSD_RESPONSE_NO_ERROR) return size;
-
-	rt_kprintf("read failed: %d\n", status);
-	return 0;
-}
-
-static rt_size_t rt_msd_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
-{
-	rt_uint8_t status;
-	rt_uint32_t i;
-
-	status = MSD_RESPONSE_NO_ERROR;
-	// rt_kprintf("write: 0x%x, size %d\n", pos, size);
-
-	/* read all sectors */
-	for (i = 0; i < size / SECTOR_SIZE; i ++)
-	{
-		status = MSD_WriteBuffer((rt_uint8_t*)((rt_uint8_t*)buffer + i * SECTOR_SIZE),
-			(part.offset + i)* SECTOR_SIZE + pos,
-			SECTOR_SIZE);
-		if (status != MSD_RESPONSE_NO_ERROR)
-		{
-			rt_kprintf("sd card write failed\n");
-			return 0;
-		}
-	}
-
-	if (status == MSD_RESPONSE_NO_ERROR) return size;
-
-	rt_kprintf("write failed: %d\n", status);
-	return 0;
-}
-
-static rt_err_t rt_msd_control(rt_device_t dev, rt_uint8_t cmd, void *args)
-{
-	return RT_EOK;
-}
-
-void rt_hw_msd_init()
-{
-	if (MSD_Init() == MSD_RESPONSE_NO_ERROR)
-	{
-		rt_uint8_t status;
-		rt_uint8_t *sector;
-
-		/* register sdcard device */
-		sdcard_device.init 	= rt_msd_init;
-		sdcard_device.open 	= rt_msd_open;
-		sdcard_device.close = rt_msd_close;
-		sdcard_device.read 	= rt_msd_read;
-		sdcard_device.write = rt_msd_write;
-		sdcard_device.control = rt_msd_control;
-
-		/* no private */
-		sdcard_device.private = RT_NULL;
-		/* get the first sector to read partition table */
-		sector = (rt_uint8_t*) rt_malloc (512);
-		if (sector == RT_NULL)
-		{
-			rt_kprintf("allocate partition sector buffer failed\n");
-			return;
-		}
-
-		status = MSD_ReadBlock(sector, 0, 512);
-		if (status == MSD_RESPONSE_NO_ERROR)
-		{
-			/* get the first partition */
-			status = dfs_filesystem_get_partition(&part, sector, 0);
-			if (status != RT_EOK)
-			{
-				/* there is no partition table */
-				part.offset = 0;
-				part.size   = 0;
-			}
-		}
-		else
-		{
-			/* there is no partition table */
-			part.offset = 0;
-			part.size   = 0;
-		}
-
-		/* release sector buffer */
-		rt_free(sector);
-
-		rt_device_register(&sdcard_device, "sd0",
-			RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_REMOVABLE | RT_DEVICE_FLAG_STANDALONE);
-	}
-	else
-	{
-		rt_kprintf("sdcard init failed\n");
-	}
-}

bsp/stm3210/project_107/msd.h

@@ -1,173 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : msd.h
-* Author             : MCD Application Team
-* Version            : V2.1
-* Date               : 05/30/2008
-* Description        : Header for msd.c file.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-* FOR MORE INFORMATION PLEASE CAREFULLY READ THE LICENSE AGREEMENT FILE LOCATED 
-* IN THE ROOT DIRECTORY OF THIS FIRMWARE PACKAGE.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __MSD_H
-#define __MSD_H
-
-/* Includes ------------------------------------------------------------------*/
-#include <stm32f10x.h>
-
-/* Private define ------------------------------------------------------------*/
-/* Block Size */
-#define BLOCK_SIZE    512
-
-/* Dummy byte */
-#define DUMMY   0xFF
-
-/* Start Data tokens  */
-/* Tokens (necessary because at nop/idle (and CS active) only 0xff is on the data/command line) */
-#define MSD_START_DATA_SINGLE_BLOCK_READ 0xFE  /* Data token start byte, Start Single Block Read */
-#define MSD_START_DATA_MULTIPLE_BLOCK_READ  0xFE  /* Data token start byte, Start Multiple Block Read */
-#define MSD_START_DATA_SINGLE_BLOCK_WRITE 0xFE  /* Data token start byte, Start Single Block Write */
-#define MSD_START_DATA_MULTIPLE_BLOCK_WRITE 0xFD  /* Data token start byte, Start Multiple Block Write */
-#define MSD_STOP_DATA_MULTIPLE_BLOCK_WRITE 0xFD  /* Data toke stop byte, Stop Multiple Block Write */
-
-/* MSD functions return */
-#define MSD_SUCCESS       0x00
-#define MSD_FAIL          0xFF
-
-/* MSD reponses and error flags */
-#define MSD_RESPONSE_NO_ERROR      0x00
-#define MSD_IN_IDLE_STATE          0x01
-#define MSD_ERASE_RESET            0x02
-#define MSD_ILLEGAL_COMMAND        0x04
-#define MSD_COM_CRC_ERROR          0x08
-#define MSD_ERASE_SEQUENCE_ERROR   0x10
-#define MSD_ADDRESS_ERROR          0x20
-#define MSD_PARAMETER_ERROR        0x40
-#define MSD_RESPONSE_FAILURE       0xFF
-
-/* Data response error */
-#define MSD_DATA_OK                0x05
-#define MSD_DATA_CRC_ERROR         0x0B
-#define MSD_DATA_WRITE_ERROR       0x0D
-#define MSD_DATA_OTHER_ERROR       0xFF
-
-/* Commands: CMDxx = CMD-number | 0x40 */
-#define MSD_GO_IDLE_STATE          0   /* CMD0=0x40 */
-#define MSD_SEND_OP_COND           1   /* CMD1=0x41 */
-#define MSD_SEND_CSD               9   /* CMD9=0x49 */
-#define MSD_SEND_CID               10  /* CMD10=0x4A */
-#define MSD_STOP_TRANSMISSION      12  /* CMD12=0x4C */
-#define MSD_SEND_STATUS            13  /* CMD13=0x4D */
-#define MSD_SET_BLOCKLEN           16  /* CMD16=0x50 */
-#define MSD_READ_SINGLE_BLOCK      17  /* CMD17=0x51 */
-#define MSD_READ_MULTIPLE_BLOCK    18  /* CMD18=0x52 */
-#define MSD_SET_BLOCK_COUNT        23  /* CMD23=0x57 */
-#define MSD_WRITE_BLOCK            24  /* CMD24=0x58 */
-#define MSD_WRITE_MULTIPLE_BLOCK   25  /* CMD25=0x59 */
-#define MSD_PROGRAM_CSD            27  /* CMD27=0x5B */
-#define MSD_SET_WRITE_PROT         28  /* CMD28=0x5C */
-#define MSD_CLR_WRITE_PROT         29  /* CMD29=0x5D */
-#define MSD_SEND_WRITE_PROT        30  /* CMD30=0x5E */
-#define MSD_TAG_SECTOR_START       32  /* CMD32=0x60 */
-#define MSD_TAG_SECTOR_END         33  /* CMD33=0x61 */
-#define MSD_UNTAG_SECTOR           34  /* CMD34=0x62 */
-#define MSD_TAG_ERASE_GROUP_START  35  /* CMD35=0x63 */
-#define MSD_TAG_ERASE_GROUP_END    36  /* CMD36=0x64 */
-#define MSD_UNTAG_ERASE_GROUP      37  /* CMD37=0x65 */
-#define MSD_ERASE                  38  /* CMD38=0x66 */
-#define MSD_READ_OCR               39  /* CMD39=0x67 */
-#define MSD_CRC_ON_OFF             40  /* CMD40=0x68 */
-
-/* Exported types ------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-typedef struct _MSD_CSD      /*Card Specific Data*/
-{
-  vu8  CSDStruct;            /* CSD structure */
-  vu8  SysSpecVersion;       /* System specification version */
-  vu8  Reserved1;            /* Reserved */
-  vu8  TAAC;                 /* Data read access-time 1 */
-  vu8  NSAC;                 /* Data read access-time 2 in CLK cycles */
-  vu8  MaxBusClkFrec;        /* Max. bus clock frequency */
-  vu16 CardComdClasses;      /* Card command classes */
-  vu8  RdBlockLen;           /* Max. read data block length */
-  vu8  PartBlockRead;        /* Partial blocks for read allowed */
-  vu8  WrBlockMisalign;      /* Write block misalignment */
-  vu8  RdBlockMisalign;      /* Read block misalignment */
-  vu8  DSRImpl;              /* DSR implemented */
-  vu8  Reserved2;            /* Reserved */
-  vu16 DeviceSize;           /* Device Size */
-  vu8  MaxRdCurrentVDDMin;   /* Max. read current @ VDD min */
-  vu8  MaxRdCurrentVDDMax;   /* Max. read current @ VDD max */
-  vu8  MaxWrCurrentVDDMin;   /* Max. write current @ VDD min */
-  vu8  MaxWrCurrentVDDMax;   /* Max. write current @ VDD max */
-  vu8  DeviceSizeMul;        /* Device size multiplier */
-  vu8  EraseGrSize;          /* Erase group size */
-  vu8  EraseGrMul;           /* Erase group size multiplier */
-  vu8  WrProtectGrSize;      /* Write protect group size */
-  vu8  WrProtectGrEnable;    /* Write protect group enable */
-  vu8  ManDeflECC;           /* Manufacturer default ECC */
-  vu8  WrSpeedFact;          /* Write speed factor */
-  vu8  MaxWrBlockLen;        /* Max. write data block length */
-  vu8  WriteBlockPaPartial;  /* Partial blocks for write allowed */
-  vu8  Reserved3;            /* Reserded */
-  vu8  ContentProtectAppli;  /* Content protection application */
-  vu8  FileFormatGrouop;     /* File format group */
-  vu8  CopyFlag;             /* Copy flag (OTP) */
-  vu8  PermWrProtect;        /* Permanent write protection */
-  vu8  TempWrProtect;        /* Temporary write protection */
-  vu8  FileFormat;           /* File Format */
-  vu8  ECC;                  /* ECC code */
-  vu8  msd_CRC;                  /* CRC */
-  vu8  Reserved4;            /* always 1*/
-}
-sMSD_CSD;
-
-typedef struct _MSD_CID      /*Card Identification Data*/
-{
-  vu8  ManufacturerID;       /* ManufacturerID */
-  vu16 OEM_AppliID;          /* OEM/Application ID */
-  vu32 ProdName1;            /* Product Name part1 */
-  vu8  ProdName2;            /* Product Name part2*/
-  vu8  ProdRev;              /* Product Revision */
-  vu32 ProdSN;               /* Product Serial Number */
-  vu8  Reserved1;            /* Reserved1 */
-  vu16 ManufactDate;         /* Manufacturing Date */
-  vu8  msd_CRC;                  /* CRC */
-  vu8  Reserved2;            /* always 1*/
-}
-sMSD_CID;
-
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-/*----- High layer function -----*/
-u8 MSD_Init(void);
-u8 MSD_WriteBlock(u8* pBuffer, u32 WriteAddr, u16 NumByteToWrite);
-u8 MSD_ReadBlock(u8* pBuffer, u32 ReadAddr, u16 NumByteToRead);
-u8 MSD_WriteBuffer(u8* pBuffer, u32 WriteAddr, u32 NumByteToWrite);
-u8 MSD_ReadBuffer(u8* pBuffer, u32 ReadAddr, u32 NumByteToRead);
-u8 MSD_GetCSDRegister(sMSD_CSD* MSD_csd);
-u8 MSD_GetCIDRegister(sMSD_CID* MSD_cid);
-
-/*----- Medium layer function -----*/
-void MSD_SendCmd(u8 Cmd, u32 Arg, u8 Crc);
-u8 MSD_GetResponse(u8 Response);
-u8 MSD_GetDataResponse(void);
-u8 MSD_GoIdleState(void);
-u16 MSD_GetStatus(void);
-
-/*----- Low layer function -----*/
-void MSD_WriteByte(u8 byte);
-u8 MSD_ReadByte(void);
-
-#endif /* __MSD_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_107/project.Uv2

@@ -1,215 +0,0 @@
-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Startup)
-Group (StdPeriph_Driver)
-Group (CMSIS)
-Group (Kernel)
-Group (STM32)
-Group (LwIP)
-Group (finsh)
-Group (Filesystem)
-
-File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
-File 1,1,<.\board.c><board.c>
-File 1,1,<.\application.c><application.c>
-File 1,1,<.\startup.c><startup.c>
-File 1,1,<.\led.c><led.c>
-File 1,1,<.\usart.c><usart.c>
-File 1,5,<.\rtconfig.h><rtconfig.h>
-File 1,5,<.\board.h><board.h>
-File 1,1,<.\stm32_eth.c><stm32_eth.c>
-File 1,1,<.\rtc.c><rtc.c>
-File 1,1,<.\msd.c><msd.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c><stm32f10x_crc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c><stm32f10x_dac.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c><stm32f10x_dma.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c><stm32f10x_exti.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c><stm32f10x_flash.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
-File 4,1,<..\..\src\clock.c><clock.c>
-File 4,1,<..\..\src\device.c><device.c>
-File 4,1,<..\..\src\idle.c><idle.c>
-File 4,1,<..\..\src\ipc.c><ipc.c>
-File 4,1,<..\..\src\irq.c><irq.c>
-File 4,1,<..\..\src\kservice.c><kservice.c>
-File 4,1,<..\..\src\mem.c><mem.c>
-File 4,1,<..\..\src\mempool.c><mempool.c>
-File 4,1,<..\..\src\object.c><object.c>
-File 4,1,<..\..\src\scheduler.c><scheduler.c>
-File 4,1,<..\..\src\slab.c><slab.c>
-File 4,1,<..\..\src\thread.c><thread.c>
-File 4,1,<..\..\src\timer.c><timer.c>
-File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
-File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
-File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
-File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
-File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
-File 6,1,<..\..\net\lwip\src\core\dhcp.c><dhcp.c>
-File 6,1,<..\..\net\lwip\src\core\dns.c><dns.c>
-File 6,1,<..\..\net\lwip\src\core\init.c><init.c>
-File 6,1,<..\..\net\lwip\src\core\memp.c><memp.c>
-File 6,1,<..\..\net\lwip\src\core\netif.c><netif.c>
-File 6,1,<..\..\net\lwip\src\core\pbuf.c><pbuf.c>
-File 6,1,<..\..\net\lwip\src\core\raw.c><raw.c>
-File 6,1,<..\..\net\lwip\src\core\stats.c><stats.c>
-File 6,1,<..\..\net\lwip\src\core\sys.c><sys.c>
-File 6,1,<..\..\net\lwip\src\core\tcp.c><tcp.c>
-File 6,1,<..\..\net\lwip\src\core\tcp_in.c><tcp_in.c>
-File 6,1,<..\..\net\lwip\src\core\tcp_out.c><tcp_out.c>
-File 6,1,<..\..\net\lwip\src\core\udp.c><udp.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\ip_frag.c><ip_frag.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\autoip.c><autoip.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\icmp.c><icmp.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\igmp.c><igmp.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\inet.c><inet.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\inet_chksum.c><inet_chksum.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\ip.c><ip.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\ip_addr.c><ip_addr.c>
-File 6,1,<..\..\net\lwip\src\api\tcpip.c><tcpip.c>
-File 6,1,<..\..\net\lwip\src\api\api_lib.c><api_lib.c>
-File 6,1,<..\..\net\lwip\src\api\api_msg.c><api_msg.c>
-File 6,1,<..\..\net\lwip\src\api\err.c><err.c>
-File 6,1,<..\..\net\lwip\src\api\netbuf.c><netbuf.c>
-File 6,1,<..\..\net\lwip\src\api\netdb.c><netdb.c>
-File 6,1,<..\..\net\lwip\src\api\netifapi.c><netifapi.c>
-File 6,1,<..\..\net\lwip\src\api\sockets.c><sockets.c>
-File 6,1,<..\..\net\lwip\src\netif\ethernetif.c><ethernetif.c>
-File 6,1,<..\..\net\lwip\src\netif\etharp.c><etharp.c>
-File 6,1,<..\..\net\lwip\src\arch\sys_arch_init.c><sys_arch_init.c>
-File 6,1,<..\..\net\lwip\src\arch\sys_arch.c><sys_arch.c>
-File 7,1,<..\..\finsh\symbol.c><symbol.c>
-File 7,1,<..\..\finsh\cmd.c><cmd.c>
-File 7,1,<..\..\finsh\finsh_compiler.c><finsh_compiler.c>
-File 7,1,<..\..\finsh\finsh_error.c><finsh_error.c>
-File 7,1,<..\..\finsh\finsh_heap.c><finsh_heap.c>
-File 7,1,<..\..\finsh\finsh_init.c><finsh_init.c>
-File 7,1,<..\..\finsh\finsh_node.c><finsh_node.c>
-File 7,1,<..\..\finsh\finsh_ops.c><finsh_ops.c>
-File 7,1,<..\..\finsh\finsh_parser.c><finsh_parser.c>
-File 7,1,<..\..\finsh\finsh_token.c><finsh_token.c>
-File 7,1,<..\..\finsh\finsh_var.c><finsh_var.c>
-File 7,1,<..\..\finsh\finsh_vm.c><finsh_vm.c>
-File 7,1,<..\..\finsh\shell.c><shell.c>
-File 8,1,<..\..\filesystem\dfs\src\dfs_util.c><dfs_util.c>
-File 8,1,<..\..\filesystem\dfs\src\dfs_fs.c><dfs_fs.c>
-File 8,1,<..\..\filesystem\dfs\src\dfs_init.c><dfs_init.c>
-File 8,1,<..\..\filesystem\dfs\src\dfs_posix.c><dfs_posix.c>
-File 8,1,<..\..\filesystem\dfs\src\dfs_raw.c><dfs_raw.c>
-File 8,1,<..\..\filesystem\dfs\filesystems\elmfat\dfs_elm.c><dfs_elm.c>
-File 8,1,<..\..\filesystem\dfs\filesystems\elmfat\ff.c><ff.c>
-
-
-Options 1,0,0  // Target 'RT-Thread STM32'
- Device (STM32F107xC)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x803FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_256 -FS08000000 -FL080000))
- DevID (0)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,4,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,4,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_CL,)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32;..\..\finsh;..\..\net\lwip\src;..\..\net\lwip\src\include;..\..\net\lwip\src\arch\include;..\..\net\lwip\src\include\ipv4;..\..\filesystem\dfs;..\..\filesystem\dfs\include)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC (--keep __fsym_* --keep __vsym_*)
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 1,0,0,0,1,0,0,0,6,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JL2CM3.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project_107/project.ewd

@@ -1,1299 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>Browse to your third-party driver</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxb.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-

bsp/stm3210/project_107/project.ewp

@@ -1,1995 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Debug\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Debug\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Debug\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_CL</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>0000000</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\finsh</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Release\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Release\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Release\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>NDEBUG</state>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_CL</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>1111111</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\finsh</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <group>
-    <name>CMSIS</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\core_cm3.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Filesystem</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_cache.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_fs.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_posix.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_raw.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_util.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\dir.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\efs.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\extract.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fat.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\file.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fs.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ls.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\partition.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\plibc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\time.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ui.c</name>
-    </file>
-  </group>
-  <group>
-    <name>finsh</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\cmd.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_compiler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_error.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_heap.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_node.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_ops.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_parser.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_token.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_var.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_vm.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\shell.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\symbol.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Kernel</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\clock.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\device.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\idle.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\irq.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mem.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\object.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\slab.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\thread.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\timer.c</name>
-    </file>
-  </group>
-  <group>
-    <name>LwIP</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_lib.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_msg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\autoip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dhcp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dns.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\err.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\etharp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\ethernetif.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\icmp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\igmp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet_chksum.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_addr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_frag.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\memp_tiny.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netbuf.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netdb.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\netif.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netifapi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\pbuf.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\raw.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\sockets.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\stats.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\sys.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_in.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_out.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\tcpip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\udp.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Startup</name>
-    <file>
-      <name>$PROJ_DIR$\application.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\led.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\msd.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtconfig.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\startup.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32_eth.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32f10x_it.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\usart.c</name>
-    </file>
-  </group>
-  <group>
-    <name>StdPeriph_Driver</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</name>
-    </file>
-  </group>
-  <group>
-    <name>STM32</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.s</name>
-    </file>
-  </group>
-</project>
-
-

bsp/stm3210/project_107/project.eww

@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<workspace>
-  <project>
-    <path>$WS_DIR$\project.ewp</path>
-  </project>
-  <batchBuild/>
-</workspace>
-
-

bsp/stm3210/project_107/rtconfig.h

@@ -1,130 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* Using Software Timer */
-/* #define RT_USING_TIMER_SOFT */
-#define RT_TIMER_THREAD_PRIO		4
-#define RT_TIMER_THREAD_STACK_SIZE	512
-#define RT_TIMER_TICK_PER_SECOND	10
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-#define RT_USING_HEAP
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART2
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-/* SECTION: finsh, a C-Express shell */
-#define RT_USING_FINSH
-/* Using symbol table */
-#define FINSH_USING_SYMTAB
-#define FINSH_USING_DESCRIPTION
-#define FINSH_DEVICE_NAME	"uart2"
-
-/* SECTION: device filesystem */
-#define RT_USING_DFS
-#define RT_USING_DFS_ELMFAT
-
-/* the max number of mounted filesystem */
-#define DFS_FILESYSTEMS_MAX			2
-/* the max number of opened files 		*/
-#define DFS_FD_MAX					4
-/* the max number of cached sector 		*/
-#define DFS_CACHE_MAX_NUM   		4
-
-/* SECTION: lwip, a lighwight TCP/IP protocol stack */
-#define RT_USING_LWIP
-/* LwIP uses RT-Thread Memory Management */
-#define RT_LWIP_USING_RT_MEM
-/* Enable ICMP protocol*/
-#define RT_LWIP_ICMP
-/* Enable UDP protocol*/
-#define RT_LWIP_UDP
-/* Enable TCP protocol*/
-#define RT_LWIP_TCP
-/* Enable DNS */
-#define RT_LWIP_DNS
-
-/* the number of simulatenously active TCP connections*/
-#define RT_LWIP_TCP_PCB_NUM	5
-
-/* ip address of target*/
-#define RT_LWIP_IPADDR0	192
-#define RT_LWIP_IPADDR1	168
-#define RT_LWIP_IPADDR2	1
-#define RT_LWIP_IPADDR3	30
-
-/* gateway address of target*/
-#define RT_LWIP_GWADDR0	192
-#define RT_LWIP_GWADDR1	168
-#define RT_LWIP_GWADDR2	1
-#define RT_LWIP_GWADDR3	1
-
-/* mask address of target*/
-#define RT_LWIP_MSKADDR0	255
-#define RT_LWIP_MSKADDR1	255
-#define RT_LWIP_MSKADDR2	255
-#define RT_LWIP_MSKADDR3	0
-
-/* tcp thread options */
-#define RT_LWIP_TCPTHREAD_PRIORITY		12
-#define RT_LWIP_TCPTHREAD_MBOX_SIZE		4
-#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
-
-/* ethernet if thread options */
-#define RT_LWIP_ETHTHREAD_PRIORITY		15
-#define RT_LWIP_ETHTHREAD_MBOX_SIZE		4
-#define RT_LWIP_ETHTHREAD_STACKSIZE		512
-
-#endif

bsp/stm3210/project_107/startup.c

@@ -1,152 +0,0 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-#include "rtc.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-#ifdef RT_USING_FINSH
-extern void finsh_system_init(void);
-extern void finsh_set_device(const char* device);
-#endif
-
-#ifdef __CC_ARM
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#elif __ICCARM__
-#pragma section="HEAP"
-#else
-extern int __bss_end;
-#endif
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-#ifdef RT_USING_HEAP
-#if STM32_EXT_SRAM
-	rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
-#else
-	#ifdef __CC_ARM
-		rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
-	#elif __ICCARM__
-	    rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
-	#else
-		/* init memory system */
-		rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
-	#endif
-#endif
-#endif
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-#ifdef RT_USING_DFS
-	/* init sdcard driver */
-#if STM32_USE_SDIO
-	rt_hw_sdcard_init();
-#else
-	rt_hw_msd_init();
-#endif
-#endif
-
-    rt_hw_rtc_init();
-
-	/* init all device */
-	rt_device_init_all();
-
-	/* init application */
-	rt_application_init();
-
-#ifdef RT_USING_FINSH
-	/* init finsh */
-	finsh_system_init();
-	finsh_set_device(FINSH_DEVICE_NAME);
-#endif
-
-    /* init timer thread */
-    rt_system_timer_thread_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_107/stm32f10x_it.c

@@ -1,330 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-#include <board.h>
-#include <rtthread.h>
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/*******************************************************************************
-* Function Name  : DMA1_Channel2_IRQHandler
-* Description    : This function handles DMA1 Channel 2 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void DMA1_Channel2_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_dma_tx_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    if (DMA_GetITStatus(DMA1_IT_TC2))
-    {
-        /* transmission complete, invoke serial dma tx isr */
-        rt_hw_serial_dma_tx_isr(&uart3_device);
-    }
-
-    /* clear DMA flag */
-    DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART1_IRQHandler
-* Description    : This function handles USART1 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART1_IRQHandler(void)
-{
-#ifdef RT_USING_UART1
-    extern struct rt_device uart1_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart1_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART2_IRQHandler
-* Description    : This function handles USART2 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART2_IRQHandler(void)
-{
-#ifdef RT_USING_UART2
-    extern struct rt_device uart2_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart2_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART3_IRQHandler
-* Description    : This function handles USART3 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART3_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart3_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-#if defined(RT_USING_DFS) && STM32_USE_SDIO
-/*******************************************************************************
-* Function Name  : SDIO_IRQHandler
-* Description    : This function handles SDIO global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void SDIO_IRQHandler(void)
-{
-    extern int SD_ProcessIRQSrc(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    /* Process All SDIO Interrupt Sources */
-    SD_ProcessIRQSrc();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#ifdef RT_USING_LWIP
-#ifdef STM32F10X_CL
-/*******************************************************************************
-* Function Name  : ETH_IRQHandler
-* Description    : This function handles ETH interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void ETH_IRQHandler(void)
-{
-	extern void rt_hw_stm32_eth_isr(void);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-	
-	rt_hw_stm32_eth_isr();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#else
-#if (STM32_ETH_IF == 0)
-/*******************************************************************************
-* Function Name  : EXTI0_IRQHandler
-* Description    : This function handles External interrupt Line 0 request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI0_IRQHandler(void)
-{
-    extern void enc28j60_isr(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    enc28j60_isr();
-
-    /* Clear the Key Button EXTI line pending bit */
-    EXTI_ClearITPendingBit(EXTI_Line0);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#if (STM32_ETH_IF == 1)
-/*******************************************************************************
-* Function Name  : EXTI9_5_IRQHandler
-* Description    : This function handles External lines 9 to 5 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI9_5_IRQHandler(void)
-{
-	extern void rt_dm9000_isr(void);
-
-	/* enter interrupt */
-	rt_interrupt_enter();
-
-	rt_dm9000_isr();
-
-	/* Clear the Key Button EXTI line pending bit */
-	EXTI_ClearITPendingBit(EXTI_Line7);
-
-	/* leave interrupt */
-	rt_interrupt_leave();
-}
-#endif
-#endif
-#endif /* end of RT_USING_LWIP */
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_107/stm32f10x_it.h

@@ -1,53 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_filesystem/application.c

@@ -1,72 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <rtthread.h>
-
-#ifdef RT_USING_DFS
-/* dfs init */
-#include <dfs_init.h>
-/* dfs filesystem:ELM FatFs filesystem init */
-#include <dfs_elm.h>
-/* dfs Filesystem APIs */
-#include <dfs_fs.h>
-#endif
-
-void rt_init_thread_entry(void* parameter)
-{
-/* Filesystem Initialization */
-#ifdef RT_USING_DFS
-	{
-        /* init the device filesystem */
-        dfs_init();
-#ifdef RT_USING_DFS_ELMFAT
-        /* init the elm FAT filesystam*/
-        elm_init();
-
-        /* mount sd card fat partition 1 as root directory */
-        if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
-            rt_kprintf("File System initialized!\n");
-        else
-            rt_kprintf("File System init failed!\n");
-#endif
-	}
-#endif
-}
-
-int rt_application_init()
-{
-	rt_thread_t init_thread;
-
-#if (RT_THREAD_PRIORITY_MAX == 32)
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 8, 20);
-#else
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 80, 20);
-#endif
-
-	if (init_thread != RT_NULL)
-		rt_thread_startup(init_thread);
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_filesystem/project.Uv2

@@ -1,166 +0,0 @@
-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Startup)
-Group (StdPeriph_Driver)
-Group (CMSIS)
-Group (Kernel)
-Group (STM32)
-Group (Filesystem)
-
-File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
-File 1,1,<.\board.c><board.c>
-File 1,1,<.\application.c><application.c>
-File 1,1,<.\startup.c><startup.c>
-File 1,1,<.\led.c><led.c>
-File 1,1,<.\usart.c><usart.c>
-File 1,1,<.\msd.c><msd.c>
-File 1,1,<.\sdcard.c><sdcard.c>
-File 1,5,<.\rtconfig.h><rtconfig.h>
-File 1,5,<.\board.h><board.h>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c><stm32f10x_crc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c><stm32f10x_dac.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c><stm32f10x_dma.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c><stm32f10x_exti.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c><stm32f10x_flash.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
-File 4,1,<..\..\src\clock.c><clock.c>
-File 4,1,<..\..\src\device.c><device.c>
-File 4,1,<..\..\src\idle.c><idle.c>
-File 4,1,<..\..\src\ipc.c><ipc.c>
-File 4,1,<..\..\src\irq.c><irq.c>
-File 4,1,<..\..\src\kservice.c><kservice.c>
-File 4,1,<..\..\src\mem.c><mem.c>
-File 4,1,<..\..\src\mempool.c><mempool.c>
-File 4,1,<..\..\src\object.c><object.c>
-File 4,1,<..\..\src\scheduler.c><scheduler.c>
-File 4,1,<..\..\src\slab.c><slab.c>
-File 4,1,<..\..\src\thread.c><thread.c>
-File 4,1,<..\..\src\timer.c><timer.c>
-File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
-File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
-File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
-File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
-File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
-File 6,1,<..\..\filesystem\dfs\src\dfs_util.c><dfs_util.c>
-File 6,1,<..\..\filesystem\dfs\src\dfs_fs.c><dfs_fs.c>
-File 6,1,<..\..\filesystem\dfs\src\dfs_init.c><dfs_init.c>
-File 6,1,<..\..\filesystem\dfs\src\dfs_posix.c><dfs_posix.c>
-File 6,1,<..\..\filesystem\dfs\src\dfs_raw.c><dfs_raw.c>
-File 6,1,<..\..\filesystem\dfs\filesystems\elmfat\dfs_elm.c><dfs_elm.c>
-File 6,1,<..\..\filesystem\dfs\filesystems\elmfat\ff.c><ff.c>
-
-
-Options 1,0,0  // Target 'RT-Thread STM32'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD,)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32;..\..\filesystem\dfs;..\..\filesystem\dfs\include;..\..\finsh)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC ()
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JL2CM3.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project_filesystem/project.ewd

@@ -1,1299 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>Browse to your third-party driver</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxb.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-

bsp/stm3210/project_filesystem/project.ewp

@@ -1,1802 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Debug\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Debug\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Debug\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>0000000</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Release\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Release\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Release\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>NDEBUG</state>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>1111111</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <group>
-    <name>CMSIS</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\core_cm3.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Filesystem</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\elmfat\dfs_elm.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_fs.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_posix.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_raw.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_util.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\elmfat\ff.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Kernel</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\clock.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\device.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\idle.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\irq.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mem.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\object.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\slab.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\thread.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\timer.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Startup</name>
-    <file>
-      <name>$PROJ_DIR$\application.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\led.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\msd.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtconfig.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\sdcard.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\startup.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32f10x_it.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\usart.c</name>
-    </file>
-  </group>
-  <group>
-    <name>StdPeriph_Driver</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</name>
-    </file>
-  </group>
-  <group>
-    <name>STM32</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.s</name>
-    </file>
-  </group>
-</project>
-
-

bsp/stm3210/project_filesystem/project.eww

@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<workspace>
-  <project>
-    <path>$WS_DIR$\project.ewp</path>
-  </project>
-  <batchBuild/>
-</workspace>
-
-

bsp/stm3210/project_filesystem/rtconfig.h

@@ -1,88 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* Using Software Timer */
-/* #define RT_USING_TIMER_SOFT */
-#define RT_TIMER_THREAD_PRIO		4
-#define RT_TIMER_THREAD_STACK_SIZE	512
-#define RT_TIMER_TICK_PER_SECOND	10
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-#define RT_USING_HEAP
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART1
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-/* SECTION: FinSH shell options */
-/* Using FinSH as Shell*/
-/* #define RT_USING_FINSH */
-/* Using symbol table */
-#define FINSH_USING_SYMTAB
-#define FINSH_USING_DESCRIPTION
-
-/* SECTION: device filesystem */
-#define RT_USING_DFS
-/* #define RT_USING_DFS_EFSL */
-#define RT_USING_DFS_ELMFAT
-#define RT_DFS_ELM_WORD_ACCESS
-
-/* the max number of mounted filesystem */
-#define DFS_FILESYSTEMS_MAX			2
-/* the max number of opened files 		*/
-#define DFS_FD_MAX					4
-/* the max number of cached sector 		*/
-#define DFS_CACHE_MAX_NUM   		4
-
-#endif

bsp/stm3210/project_filesystem/startup.c

@@ -1,147 +0,0 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-#ifdef RT_USING_FINSH
-extern void finsh_system_init(void);
-extern void finsh_set_device(const char* device);
-#endif
-
-#ifdef __CC_ARM
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#elif __ICCARM__
-#pragma section="HEAP"
-#else
-extern int __bss_end;
-#endif
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-#ifdef RT_USING_HEAP
-#if STM32_EXT_SRAM
-	rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
-#else
-	#ifdef __CC_ARM
-		rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
-	#elif __ICCARM__
-	    rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
-	#else
-		/* init memory system */
-		rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
-	#endif
-#endif
-#endif
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-	/* init sdcard driver */
-#if STM32_USE_SDIO
-	rt_hw_sdcard_init();
-#else
-	rt_hw_msd_init();
-#endif
-
-	/* init all device */
-	rt_device_init_all();
-
-	/* init application */
-	rt_application_init();
-
-#ifdef RT_USING_FINSH
-	/* init finsh */
-	finsh_system_init();
-	finsh_set_device("uart1");
-#endif
-
-    /* init timer thread */
-    rt_system_timer_thread_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_filesystem/stm32f10x_conf.h

@@ -1,76 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_conf.h
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-/* #include "stm32f10x_adc.h" */
-#include "stm32f10x_bkp.h"
-/* #include "stm32f10x_can.h" */
-/* #include "stm32f10x_crc.h" */
-/* #include "stm32f10x_dac.h" */
-/* #include "stm32f10x_dbgmcu.h" */
-/* #include "stm32f10x_dma.h" */
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-//#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-/* #include "stm32f10x_i2c.h" */
-/* #include "stm32f10x_iwdg.h" */
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-/* #include "stm32f10x_sdio.h" */
-//#include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
-#include "stm32f10x_usart.h"
-/* #include "stm32f10x_wwdg.h" */
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *   which reports the name of the source file and the source
-  *   line number of the call that failed.
-  *   If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_filesystem/stm32f10x_it.c

@@ -1,330 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-#include <board.h>
-#include <rtthread.h>
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/*******************************************************************************
-* Function Name  : DMA1_Channel2_IRQHandler
-* Description    : This function handles DMA1 Channel 2 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void DMA1_Channel2_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_dma_tx_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    if (DMA_GetITStatus(DMA1_IT_TC2))
-    {
-        /* transmission complete, invoke serial dma tx isr */
-        rt_hw_serial_dma_tx_isr(&uart3_device);
-    }
-
-    /* clear DMA flag */
-    DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART1_IRQHandler
-* Description    : This function handles USART1 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART1_IRQHandler(void)
-{
-#ifdef RT_USING_UART1
-    extern struct rt_device uart1_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart1_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART2_IRQHandler
-* Description    : This function handles USART2 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART2_IRQHandler(void)
-{
-#ifdef RT_USING_UART2
-    extern struct rt_device uart2_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart2_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART3_IRQHandler
-* Description    : This function handles USART3 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART3_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart3_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-#if defined(RT_USING_DFS) && STM32_USE_SDIO
-/*******************************************************************************
-* Function Name  : SDIO_IRQHandler
-* Description    : This function handles SDIO global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void SDIO_IRQHandler(void)
-{
-    extern int SD_ProcessIRQSrc(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    /* Process All SDIO Interrupt Sources */
-    SD_ProcessIRQSrc();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#ifdef RT_USING_LWIP
-#ifdef STM32F10X_CL
-/*******************************************************************************
-* Function Name  : ETH_IRQHandler
-* Description    : This function handles ETH interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void ETH_IRQHandler(void)
-{
-	extern void rt_hw_stm32_eth_isr(void);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-	
-	rt_hw_stm32_eth_isr();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#else
-#if (STM32_ETH_IF == 0)
-/*******************************************************************************
-* Function Name  : EXTI0_IRQHandler
-* Description    : This function handles External interrupt Line 0 request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI0_IRQHandler(void)
-{
-    extern void enc28j60_isr(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    enc28j60_isr();
-
-    /* Clear the Key Button EXTI line pending bit */
-    EXTI_ClearITPendingBit(EXTI_Line0);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#if (STM32_ETH_IF == 1)
-/*******************************************************************************
-* Function Name  : EXTI9_5_IRQHandler
-* Description    : This function handles External lines 9 to 5 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI9_5_IRQHandler(void)
-{
-	extern void rt_dm9000_isr(void);
-
-	/* enter interrupt */
-	rt_interrupt_enter();
-
-	rt_dm9000_isr();
-
-	/* Clear the Key Button EXTI line pending bit */
-	EXTI_ClearITPendingBit(EXTI_Line7);
-
-	/* leave interrupt */
-	rt_interrupt_leave();
-}
-#endif
-#endif
-#endif /* end of RT_USING_LWIP */
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_filesystem/stm32f10x_it.h

@@ -1,53 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_finsh/application.c

@@ -1,27 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <rtthread.h>
-
-int rt_application_init()
-{
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_finsh/project.Uv2

@@ -1,170 +0,0 @@
-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Startup)
-Group (StdPeriph_Driver)
-Group (CMSIS)
-Group (Kernel)
-Group (STM32)
-Group (finsh)
-
-File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
-File 1,1,<.\board.c><board.c>
-File 1,1,<.\application.c><application.c>
-File 1,1,<.\startup.c><startup.c>
-File 1,1,<.\led.c><led.c>
-File 1,1,<.\usart.c><usart.c>
-File 1,5,<.\rtconfig.h><rtconfig.h>
-File 1,5,<.\board.h><board.h>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c><stm32f10x_crc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c><stm32f10x_dac.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c><stm32f10x_dma.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c><stm32f10x_exti.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c><stm32f10x_flash.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
-File 4,1,<..\..\src\clock.c><clock.c>
-File 4,1,<..\..\src\device.c><device.c>
-File 4,1,<..\..\src\idle.c><idle.c>
-File 4,1,<..\..\src\ipc.c><ipc.c>
-File 4,1,<..\..\src\irq.c><irq.c>
-File 4,1,<..\..\src\kservice.c><kservice.c>
-File 4,1,<..\..\src\mem.c><mem.c>
-File 4,1,<..\..\src\mempool.c><mempool.c>
-File 4,1,<..\..\src\object.c><object.c>
-File 4,1,<..\..\src\scheduler.c><scheduler.c>
-File 4,1,<..\..\src\slab.c><slab.c>
-File 4,1,<..\..\src\thread.c><thread.c>
-File 4,1,<..\..\src\timer.c><timer.c>
-File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
-File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
-File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
-File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
-File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
-File 6,1,<..\..\finsh\symbol.c><symbol.c>
-File 6,1,<..\..\finsh\cmd.c><cmd.c>
-File 6,1,<..\..\finsh\finsh_compiler.c><finsh_compiler.c>
-File 6,1,<..\..\finsh\finsh_error.c><finsh_error.c>
-File 6,1,<..\..\finsh\finsh_heap.c><finsh_heap.c>
-File 6,1,<..\..\finsh\finsh_init.c><finsh_init.c>
-File 6,1,<..\..\finsh\finsh_node.c><finsh_node.c>
-File 6,1,<..\..\finsh\finsh_ops.c><finsh_ops.c>
-File 6,1,<..\..\finsh\finsh_parser.c><finsh_parser.c>
-File 6,1,<..\..\finsh\finsh_token.c><finsh_token.c>
-File 6,1,<..\..\finsh\finsh_var.c><finsh_var.c>
-File 6,1,<..\..\finsh\finsh_vm.c><finsh_vm.c>
-File 6,1,<..\..\finsh\shell.c><shell.c>
-
-
-Options 1,0,0  // Target 'RT-Thread STM32'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD,)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32;..\..\finsh)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC (--keep __fsym_* --keep __vsym_*)
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JL2CM3.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project_finsh/project.ewd

@@ -1,1299 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>Browse to your third-party driver</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxb.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-

bsp/stm3210/project_finsh/project.ewp

@@ -1,1812 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Debug\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Debug\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Debug\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>0000000</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\finsh</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Release\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Release\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Release\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>NDEBUG</state>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>1111111</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\finsh</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <group>
-    <name>CMSIS</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\core_cm3.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
-    </file>
-  </group>
-  <group>
-    <name>finsh</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\cmd.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_compiler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_error.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_heap.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_node.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_ops.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_parser.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_token.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_var.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_vm.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\shell.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\symbol.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Kernel</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\clock.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\device.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\idle.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\irq.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mem.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\object.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\slab.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\thread.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\timer.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Startup</name>
-    <file>
-      <name>$PROJ_DIR$\application.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\led.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtconfig.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\startup.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32f10x_it.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\usart.c</name>
-    </file>
-  </group>
-  <group>
-    <name>StdPeriph_Driver</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</name>
-    </file>
-  </group>
-  <group>
-    <name>STM32</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.s</name>
-    </file>
-  </group>
-</project>
-
-

bsp/stm3210/project_finsh/project.eww

@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<workspace>
-  <project>
-    <path>$WS_DIR$\project.ewp</path>
-  </project>
-  <batchBuild/>
-</workspace>
-
-

bsp/stm3210/project_finsh/rtconfig.h

@@ -1,74 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* Using Software Timer */
-/* #define RT_USING_TIMER_SOFT */
-#define RT_TIMER_THREAD_PRIO		4
-#define RT_TIMER_THREAD_STACK_SIZE	512
-#define RT_TIMER_TICK_PER_SECOND	10
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-#define RT_USING_HEAP
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART1
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-/* SECTION: finsh, a C-Express shell */
-#define RT_USING_FINSH
-/* Using symbol table */
-#define FINSH_USING_SYMTAB
-#define FINSH_USING_DESCRIPTION
-
-#endif

bsp/stm3210/project_finsh/startup.c

@@ -1,140 +0,0 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-#ifdef RT_USING_FINSH
-extern void finsh_system_init(void);
-extern void finsh_set_device(const char* device);
-#endif
-
-#ifdef __CC_ARM
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#elif __ICCARM__
-#pragma section="HEAP"
-#else
-extern int __bss_end;
-#endif
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-#ifdef RT_USING_HEAP
-#if STM32_EXT_SRAM
-	rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
-#else
-	#ifdef __CC_ARM
-		rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
-	#elif __ICCARM__
-	    rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
-	#else
-		/* init memory system */
-		rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
-	#endif
-#endif
-#endif
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-	/* init all device */
-	rt_device_init_all();
-
-	/* init application */
-	rt_application_init();
-
-#ifdef RT_USING_FINSH
-	/* init finsh */
-	finsh_system_init();
-	finsh_set_device("uart1");
-#endif
-
-    /* init timer thread */
-    rt_system_timer_thread_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_finsh/stm32f10x_conf.h

@@ -1,76 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_conf.h
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-/* #include "stm32f10x_adc.h" */
-#include "stm32f10x_bkp.h"
-/* #include "stm32f10x_can.h" */
-/* #include "stm32f10x_crc.h" */
-/* #include "stm32f10x_dac.h" */
-/* #include "stm32f10x_dbgmcu.h" */
-/* #include "stm32f10x_dma.h" */
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-//#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-/* #include "stm32f10x_i2c.h" */
-/* #include "stm32f10x_iwdg.h" */
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-/* #include "stm32f10x_sdio.h" */
-//#include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
-#include "stm32f10x_usart.h"
-/* #include "stm32f10x_wwdg.h" */
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *   which reports the name of the source file and the source
-  *   line number of the call that failed.
-  *   If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_finsh/stm32f10x_it.c

@@ -1,330 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-#include <board.h>
-#include <rtthread.h>
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/*******************************************************************************
-* Function Name  : DMA1_Channel2_IRQHandler
-* Description    : This function handles DMA1 Channel 2 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void DMA1_Channel2_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_dma_tx_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    if (DMA_GetITStatus(DMA1_IT_TC2))
-    {
-        /* transmission complete, invoke serial dma tx isr */
-        rt_hw_serial_dma_tx_isr(&uart3_device);
-    }
-
-    /* clear DMA flag */
-    DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART1_IRQHandler
-* Description    : This function handles USART1 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART1_IRQHandler(void)
-{
-#ifdef RT_USING_UART1
-    extern struct rt_device uart1_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart1_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART2_IRQHandler
-* Description    : This function handles USART2 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART2_IRQHandler(void)
-{
-#ifdef RT_USING_UART2
-    extern struct rt_device uart2_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart2_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART3_IRQHandler
-* Description    : This function handles USART3 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART3_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart3_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-#if defined(RT_USING_DFS) && STM32_USE_SDIO
-/*******************************************************************************
-* Function Name  : SDIO_IRQHandler
-* Description    : This function handles SDIO global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void SDIO_IRQHandler(void)
-{
-    extern int SD_ProcessIRQSrc(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    /* Process All SDIO Interrupt Sources */
-    SD_ProcessIRQSrc();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#ifdef RT_USING_LWIP
-#ifdef STM32F10X_CL
-/*******************************************************************************
-* Function Name  : ETH_IRQHandler
-* Description    : This function handles ETH interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void ETH_IRQHandler(void)
-{
-	extern void rt_hw_stm32_eth_isr(void);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-	
-	rt_hw_stm32_eth_isr();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#else
-#if (STM32_ETH_IF == 0)
-/*******************************************************************************
-* Function Name  : EXTI0_IRQHandler
-* Description    : This function handles External interrupt Line 0 request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI0_IRQHandler(void)
-{
-    extern void enc28j60_isr(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    enc28j60_isr();
-
-    /* Clear the Key Button EXTI line pending bit */
-    EXTI_ClearITPendingBit(EXTI_Line0);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#if (STM32_ETH_IF == 1)
-/*******************************************************************************
-* Function Name  : EXTI9_5_IRQHandler
-* Description    : This function handles External lines 9 to 5 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI9_5_IRQHandler(void)
-{
-	extern void rt_dm9000_isr(void);
-
-	/* enter interrupt */
-	rt_interrupt_enter();
-
-	rt_dm9000_isr();
-
-	/* Clear the Key Button EXTI line pending bit */
-	EXTI_ClearITPendingBit(EXTI_Line7);
-
-	/* leave interrupt */
-	rt_interrupt_leave();
-}
-#endif
-#endif
-#endif /* end of RT_USING_LWIP */
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_finsh/stm32f10x_it.h

@@ -1,53 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_full/application.c

@@ -1,110 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <board.h>
-#include <rtthread.h>
-
-#ifdef RT_USING_DFS
-/* dfs init */
-#include <dfs_init.h>
-/* dfs filesystem:ELM filesystem init */
-#include <dfs_elm.h>
-/* dfs Filesystem APIs */
-#include <dfs_fs.h>
-#endif
-
-#ifdef RT_USING_LWIP
-#include <lwip/sys.h>
-#include <lwip/api.h>
-#include <netif/ethernetif.h>
-#endif
-
-void rt_init_thread_entry(void* parameter)
-{
-/* Filesystem Initialization */
-#ifdef RT_USING_DFS
-	{
-		/* init the device filesystem */
-		dfs_init();
-
-#ifdef RT_USING_DFS_ELMFAT
-		/* init the elm chan FatFs filesystam*/
-		elm_init();
-
-		/* mount sd card fat partition 1 as root directory */
-		if (dfs_mount("sd0", "/", "elm", 0, 0) == 0)
-		{
-			rt_kprintf("File System initialized!\n");
-		}
-		else
-			rt_kprintf("File System initialzation failed!\n");
-#endif
-	}
-#endif
-
-/* LwIP Initialization */
-#ifdef RT_USING_LWIP
-	{
-		extern void lwip_sys_init(void);
-
-		/* register ethernetif device */
-		eth_system_device_init();
-
-#ifdef STM32F10X_CL
-		rt_hw_stm32_eth_init();
-#else
-	/* STM32F103 */
-	#if STM32_ETH_IF == 0
-			rt_hw_enc28j60_init();
-	#elif STM32_ETH_IF == 1
-			rt_hw_dm9000_init();
-	#endif
-#endif
-
-		/* re-init device driver */
-		rt_device_init_all();
-
-		/* init lwip system */
-		lwip_sys_init();
-		rt_kprintf("TCP/IP initialized!\n");
-	}
-#endif
-}
-
-int rt_application_init()
-{
-	rt_thread_t init_thread;
-
-#if (RT_THREAD_PRIORITY_MAX == 32)
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 8, 20);
-#else
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 80, 20);
-#endif
-
-	if (init_thread != RT_NULL)
-		rt_thread_startup(init_thread);
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_full/board.h

@@ -1,75 +0,0 @@
-/*
- * File      : board.h
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2009, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-09-22     Bernard      add board.h to this bsp
- */
-
-// <<< Use Configuration Wizard in Context Menu >>>
-#ifndef __BOARD_H__
-#define __BOARD_H__
-
-/* board configuration */
-// <o> SDCard Driver <1=>SDIO sdcard <0=>SPI MMC card
-// 	<i>Default: 1
-#define STM32_USE_SDIO			1
-
-/* whether use board external SRAM memory */
-// <e>Use external SRAM memory on the board
-// 	<i>Enable External SRAM memory
-#define STM32_EXT_SRAM          0
-//	<o>Begin Address of External SRAM
-//		<i>Default: 0x68000000
-#define STM32_EXT_SRAM_BEGIN    0x68000000 /* the begining address of external SRAM */
-//	<o>End Address of External SRAM
-//		<i>Default: 0x68080000
-#define STM32_EXT_SRAM_END      0x68080000 /* the end address of external SRAM */
-// </e>
-
-// <o> Internal SRAM memory size[Kbytes] <8-64>
-//	<i>Default: 64
-#define STM32_SRAM_SIZE         64
-#define STM32_SRAM_END          (0x20000000 + STM32_SRAM_SIZE * 1024)
-
-// <o> Console on USART: <0=> no console <1=>USART 1 <2=>USART 2 <3=> USART 3
-// 	<i>Default: 1
-#define STM32_CONSOLE_USART		1
-
-// <o> Ethernet Interface: <0=> Microchip ENC28J60 <1=> Davicom DM9000A
-// 	<i>Default: 0
-#define STM32_ETH_IF			0
-
-void rt_hw_board_led_on(int n);
-void rt_hw_board_led_off(int n);
-void rt_hw_board_init(void);
-
-#if STM32_CONSOLE_USART == 0
-#define CONSOLE_DEVICE "no"
-#elif STM32_CONSOLE_USART == 1
-#define CONSOLE_DEVICE "uart1"
-#elif STM32_CONSOLE_USART == 2
-#define CONSOLE_DEVICE "uart2"
-#elif STM32_CONSOLE_USART == 3
-#define CONSOLE_DEVICE "uart3"
-#endif
-
-void rt_hw_usart_init(void);
-
-/* SD Card init function */
-void rt_hw_sdcard_init(void);
-void rt_hw_msd_init(void);
-
-/* ETH interface init function */
-void rt_hw_enc28j60_init(void);
-void rt_hw_dm9000_init(void);
-
-#endif
-
-// <<< Use Configuration Wizard in Context Menu >>>

bsp/stm3210/project_full/project.Uv2

@@ -1,227 +0,0 @@
-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Startup)
-Group (StdPeriph_Driver)
-Group (CMSIS)
-Group (Kernel)
-Group (STM32)
-Group (finsh)
-Group (Filesystem)
-Group (LwIP)
-
-File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
-File 1,1,<.\board.c><board.c>
-File 1,1,<.\application.c><application.c>
-File 1,1,<.\startup.c><startup.c>
-File 1,1,<.\led.c><led.c>
-File 1,1,<.\usart.c><usart.c>
-File 1,1,<.\sdcard.c><sdcard.c>
-File 1,1,<.\msd.c><msd.c>
-File 1,1,<.\enc28j60.c><enc28j60.c>
-File 1,1,<.\dm9000a.c><dm9000a.c>
-File 1,1,<.\rtc.c><rtc.c>
-File 1,5,<.\rtconfig.h><rtconfig.h>
-File 1,5,<.\board.h><board.h>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c><stm32f10x_crc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c><stm32f10x_dac.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c><stm32f10x_dma.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c><stm32f10x_exti.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c><stm32f10x_flash.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
-File 4,1,<..\..\src\clock.c><clock.c>
-File 4,1,<..\..\src\device.c><device.c>
-File 4,1,<..\..\src\idle.c><idle.c>
-File 4,1,<..\..\src\ipc.c><ipc.c>
-File 4,1,<..\..\src\irq.c><irq.c>
-File 4,1,<..\..\src\kservice.c><kservice.c>
-File 4,1,<..\..\src\mem.c><mem.c>
-File 4,1,<..\..\src\mempool.c><mempool.c>
-File 4,1,<..\..\src\object.c><object.c>
-File 4,1,<..\..\src\scheduler.c><scheduler.c>
-File 4,1,<..\..\src\slab.c><slab.c>
-File 4,1,<..\..\src\thread.c><thread.c>
-File 4,1,<..\..\src\timer.c><timer.c>
-File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
-File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
-File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
-File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
-File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 6,1,<..\..\finsh\symbol.c><symbol.c>
-File 6,1,<..\..\finsh\cmd.c><cmd.c>
-File 6,1,<..\..\finsh\finsh_compiler.c><finsh_compiler.c>
-File 6,1,<..\..\finsh\finsh_error.c><finsh_error.c>
-File 6,1,<..\..\finsh\finsh_heap.c><finsh_heap.c>
-File 6,1,<..\..\finsh\finsh_init.c><finsh_init.c>
-File 6,1,<..\..\finsh\finsh_node.c><finsh_node.c>
-File 6,1,<..\..\finsh\finsh_ops.c><finsh_ops.c>
-File 6,1,<..\..\finsh\finsh_parser.c><finsh_parser.c>
-File 6,1,<..\..\finsh\finsh_token.c><finsh_token.c>
-File 6,1,<..\..\finsh\finsh_var.c><finsh_var.c>
-File 6,1,<..\..\finsh\finsh_vm.c><finsh_vm.c>
-File 6,1,<..\..\finsh\shell.c><shell.c>
-File 7,1,<..\..\filesystem\dfs\src\dfs_util.c><dfs_util.c>
-File 7,1,<..\..\filesystem\dfs\src\dfs_cache.c><dfs_cache.c>
-File 7,1,<..\..\filesystem\dfs\src\dfs_fs.c><dfs_fs.c>
-File 7,1,<..\..\filesystem\dfs\src\dfs_init.c><dfs_init.c>
-File 7,1,<..\..\filesystem\dfs\src\dfs_posix.c><dfs_posix.c>
-File 7,1,<..\..\filesystem\dfs\src\dfs_raw.c><dfs_raw.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\plibc.c><plibc.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\efs.c><efs.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\extract.c><extract.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\base\partition.c><partition.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ui.c><ui.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\dir.c><dir.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fat.c><fat.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\file.c><file.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fs.c><fs.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ls.c><ls.c>
-File 7,1,<..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\time.c><time.c>
-File 8,1,<..\..\net\lwip\src\core\dhcp.c><dhcp.c>
-File 8,1,<..\..\net\lwip\src\core\dns.c><dns.c>
-File 8,1,<..\..\net\lwip\src\core\init.c><init.c>
-File 8,1,<..\..\net\lwip\src\core\memp.c><memp.c>
-File 8,1,<..\..\net\lwip\src\core\netif.c><netif.c>
-File 8,1,<..\..\net\lwip\src\core\pbuf.c><pbuf.c>
-File 8,1,<..\..\net\lwip\src\core\raw.c><raw.c>
-File 8,1,<..\..\net\lwip\src\core\stats.c><stats.c>
-File 8,1,<..\..\net\lwip\src\core\sys.c><sys.c>
-File 8,1,<..\..\net\lwip\src\core\tcp.c><tcp.c>
-File 8,1,<..\..\net\lwip\src\core\tcp_in.c><tcp_in.c>
-File 8,1,<..\..\net\lwip\src\core\tcp_out.c><tcp_out.c>
-File 8,1,<..\..\net\lwip\src\core\udp.c><udp.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\ip_frag.c><ip_frag.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\autoip.c><autoip.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\icmp.c><icmp.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\igmp.c><igmp.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\inet.c><inet.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\inet_chksum.c><inet_chksum.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\ip.c><ip.c>
-File 8,1,<..\..\net\lwip\src\core\ipv4\ip_addr.c><ip_addr.c>
-File 8,1,<..\..\net\lwip\src\api\tcpip.c><tcpip.c>
-File 8,1,<..\..\net\lwip\src\api\api_lib.c><api_lib.c>
-File 8,1,<..\..\net\lwip\src\api\api_msg.c><api_msg.c>
-File 8,1,<..\..\net\lwip\src\api\err.c><err.c>
-File 8,1,<..\..\net\lwip\src\api\netbuf.c><netbuf.c>
-File 8,1,<..\..\net\lwip\src\api\netdb.c><netdb.c>
-File 8,1,<..\..\net\lwip\src\api\netifapi.c><netifapi.c>
-File 8,1,<..\..\net\lwip\src\api\sockets.c><sockets.c>
-File 8,1,<..\..\net\lwip\src\netif\ethernetif.c><ethernetif.c>
-File 8,1,<..\..\net\lwip\src\netif\etharp.c><etharp.c>
-File 8,1,<..\..\net\lwip\src\arch\sys_arch_init.c><sys_arch_init.c>
-File 8,1,<..\..\net\lwip\src\arch\sys_arch.c><sys_arch.c>
-
-
-Options 1,0,0  // Target 'RT-Thread STM32'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD,)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32;..\..\filesystem\dfs;..\..\filesystem\dfs\include;..\..\filesystem\dfs\filesystems\efsl\src\include;..\..\filesystem\dfs\filesystems\efsl\src\base\include;..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include;..\..\net\lwip\src;..\..\net\lwip\src\include;..\..\net\lwip\src\arch\include;..\..\net\lwip\src\include\ipv4;..\..\finsh)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC (--keep __fsym_* --keep __vsym_*)
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,6,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JL2CM3.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project_full/project.ewd

@@ -1,1299 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>Browse to your third-party driver</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxb.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-

bsp/stm3210/project_full/project.ewp

@@ -1,2001 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Debug\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Debug\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Debug\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>0000000</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\finsh</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Release\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Release\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Release\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>NDEBUG</state>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>1111111</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\finsh</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\include</state>
-          <state>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <group>
-    <name>CMSIS</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\core_cm3.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Filesystem</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_cache.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_fs.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_posix.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_raw.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\src\dfs_util.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\dir.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\efs.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\extract.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fat.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\file.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\fs.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ls.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\partition.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\base\plibc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\time.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\filesystem\dfs\filesystems\efsl\src\fs\vfat\ui.c</name>
-    </file>
-  </group>
-  <group>
-    <name>finsh</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\cmd.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_compiler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_error.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_heap.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_node.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_ops.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_parser.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_token.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_var.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\finsh_vm.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\shell.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\finsh\symbol.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Kernel</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\clock.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\device.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\idle.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\irq.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mem.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\object.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\slab.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\thread.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\timer.c</name>
-    </file>
-  </group>
-  <group>
-    <name>LwIP</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_lib.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_msg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\autoip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dhcp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dns.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\err.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\etharp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\ethernetif.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\icmp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\igmp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet_chksum.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_addr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_frag.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\memp_tiny.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netbuf.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netdb.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\netif.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netifapi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\pbuf.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\raw.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\sockets.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\stats.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\sys.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_in.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_out.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\tcpip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\udp.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Startup</name>
-    <file>
-      <name>$PROJ_DIR$\application.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\dm9000a.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\enc28j60.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\led.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\msd.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtconfig.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\sdcard.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\startup.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32f10x_it.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\usart.c</name>
-    </file>
-  </group>
-  <group>
-    <name>StdPeriph_Driver</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</name>
-    </file>
-  </group>
-  <group>
-    <name>STM32</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.s</name>
-    </file>
-  </group>
-</project>
-
-

bsp/stm3210/project_full/project.eww

@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<workspace>
-  <project>
-    <path>$WS_DIR$\project.ewp</path>
-  </project>
-  <batchBuild/>
-</workspace>
-
-

bsp/stm3210/project_full/rtconfig.h

@@ -1,129 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* Using Software Timer */
-/* #define RT_USING_TIMER_SOFT */
-#define RT_TIMER_THREAD_PRIO		4
-#define RT_TIMER_THREAD_STACK_SIZE	512
-#define RT_TIMER_TICK_PER_SECOND	10
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-#define RT_USING_HEAP
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART1
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-/* SECTION: finsh, a C-Express shell */
-#define RT_USING_FINSH
-/* Using symbol table */
-#define FINSH_USING_SYMTAB
-#define FINSH_USING_DESCRIPTION
-
-/* SECTION: device filesystem */
-#define RT_USING_DFS
-#define RT_USING_DFS_ELMFAT
-
-/* the max number of mounted filesystem */
-#define DFS_FILESYSTEMS_MAX			2
-/* the max number of opened files 		*/
-#define DFS_FD_MAX					4
-/* the max number of cached sector 		*/
-#define DFS_CACHE_MAX_NUM   		4
-
-/* SECTION: lwip, a lighwight TCP/IP protocol stack */
-#define RT_USING_LWIP
-/* LwIP uses RT-Thread Memory Management */
-#define RT_LWIP_USING_RT_MEM
-/* Enable ICMP protocol*/
-#define RT_LWIP_ICMP
-/* Enable UDP protocol*/
-#define RT_LWIP_UDP
-/* Enable TCP protocol*/
-#define RT_LWIP_TCP
-/* Enable DNS */
-#define RT_LWIP_DNS
-
-/* the number of simulatenously active TCP connections*/
-#define RT_LWIP_TCP_PCB_NUM	5
-
-/* ip address of target*/
-#define RT_LWIP_IPADDR0	192
-#define RT_LWIP_IPADDR1	168
-#define RT_LWIP_IPADDR2	1
-#define RT_LWIP_IPADDR3	30
-
-/* gateway address of target*/
-#define RT_LWIP_GWADDR0	192
-#define RT_LWIP_GWADDR1	168
-#define RT_LWIP_GWADDR2	1
-#define RT_LWIP_GWADDR3	1
-
-/* mask address of target*/
-#define RT_LWIP_MSKADDR0	255
-#define RT_LWIP_MSKADDR1	255
-#define RT_LWIP_MSKADDR2	255
-#define RT_LWIP_MSKADDR3	0
-
-/* tcp thread options */
-#define RT_LWIP_TCPTHREAD_PRIORITY		12
-#define RT_LWIP_TCPTHREAD_MBOX_SIZE		4
-#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
-
-/* ethernet if thread options */
-#define RT_LWIP_ETHTHREAD_PRIORITY		15
-#define RT_LWIP_ETHTHREAD_MBOX_SIZE		4
-#define RT_LWIP_ETHTHREAD_STACKSIZE		512
-
-#endif

bsp/stm3210/project_full/startup.c

@@ -1,152 +0,0 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-#include "rtc.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-#ifdef RT_USING_FINSH
-extern void finsh_system_init(void);
-extern void finsh_set_device(const char* device);
-#endif
-
-#ifdef __CC_ARM
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#elif __ICCARM__
-#pragma section="HEAP"
-#else
-extern int __bss_end;
-#endif
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-#ifdef RT_USING_HEAP
-#if STM32_EXT_SRAM
-	rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
-#else
-	#ifdef __CC_ARM
-		rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
-	#elif __ICCARM__
-	    rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
-	#else
-		/* init memory system */
-		rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
-	#endif
-#endif
-#endif
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-#ifdef RT_USING_DFS
-	/* init sdcard driver */
-#if STM32_USE_SDIO
-	rt_hw_sdcard_init();
-#else
-	rt_hw_msd_init();
-#endif
-#endif
-
-    rt_hw_rtc_init();
-
-	/* init all device */
-	rt_device_init_all();
-
-	/* init application */
-	rt_application_init();
-
-#ifdef RT_USING_FINSH
-	/* init finsh */
-	finsh_system_init();
-	finsh_set_device("uart1");
-#endif
-
-    /* init timer thread */
-    rt_system_timer_thread_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_full/stm32f10x_conf.h

@@ -1,76 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_conf.h
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-/* #include "stm32f10x_adc.h" */
-#include "stm32f10x_bkp.h"
-/* #include "stm32f10x_can.h" */
-/* #include "stm32f10x_crc.h" */
-/* #include "stm32f10x_dac.h" */
-/* #include "stm32f10x_dbgmcu.h" */
-/* #include "stm32f10x_dma.h" */
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-//#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-/* #include "stm32f10x_i2c.h" */
-/* #include "stm32f10x_iwdg.h" */
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-/* #include "stm32f10x_sdio.h" */
-//#include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
-#include "stm32f10x_usart.h"
-/* #include "stm32f10x_wwdg.h" */
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *   which reports the name of the source file and the source
-  *   line number of the call that failed.
-  *   If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_full/stm32f10x_it.c

@@ -1,330 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-#include <board.h>
-#include <rtthread.h>
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/*******************************************************************************
-* Function Name  : DMA1_Channel2_IRQHandler
-* Description    : This function handles DMA1 Channel 2 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void DMA1_Channel2_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_dma_tx_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    if (DMA_GetITStatus(DMA1_IT_TC2))
-    {
-        /* transmission complete, invoke serial dma tx isr */
-        rt_hw_serial_dma_tx_isr(&uart3_device);
-    }
-
-    /* clear DMA flag */
-    DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART1_IRQHandler
-* Description    : This function handles USART1 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART1_IRQHandler(void)
-{
-#ifdef RT_USING_UART1
-    extern struct rt_device uart1_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart1_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART2_IRQHandler
-* Description    : This function handles USART2 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART2_IRQHandler(void)
-{
-#ifdef RT_USING_UART2
-    extern struct rt_device uart2_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart2_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART3_IRQHandler
-* Description    : This function handles USART3 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART3_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart3_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-#if defined(RT_USING_DFS) && STM32_USE_SDIO
-/*******************************************************************************
-* Function Name  : SDIO_IRQHandler
-* Description    : This function handles SDIO global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void SDIO_IRQHandler(void)
-{
-    extern int SD_ProcessIRQSrc(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    /* Process All SDIO Interrupt Sources */
-    SD_ProcessIRQSrc();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#ifdef RT_USING_LWIP
-#ifdef STM32F10X_CL
-/*******************************************************************************
-* Function Name  : ETH_IRQHandler
-* Description    : This function handles ETH interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void ETH_IRQHandler(void)
-{
-	extern void rt_hw_stm32_eth_isr(void);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-	
-	rt_hw_stm32_eth_isr();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#else
-#if (STM32_ETH_IF == 0)
-/*******************************************************************************
-* Function Name  : EXTI0_IRQHandler
-* Description    : This function handles External interrupt Line 0 request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI0_IRQHandler(void)
-{
-    extern void enc28j60_isr(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    enc28j60_isr();
-
-    /* Clear the Key Button EXTI line pending bit */
-    EXTI_ClearITPendingBit(EXTI_Line0);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#if (STM32_ETH_IF == 1)
-/*******************************************************************************
-* Function Name  : EXTI9_5_IRQHandler
-* Description    : This function handles External lines 9 to 5 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI9_5_IRQHandler(void)
-{
-	extern void rt_dm9000_isr(void);
-
-	/* enter interrupt */
-	rt_interrupt_enter();
-
-	rt_dm9000_isr();
-
-	/* Clear the Key Button EXTI line pending bit */
-	EXTI_ClearITPendingBit(EXTI_Line7);
-
-	/* leave interrupt */
-	rt_interrupt_leave();
-}
-#endif
-#endif
-#endif /* end of RT_USING_LWIP */
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_full/stm32f10x_it.h

@@ -1,53 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_led/application.c

@@ -1,86 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <rtthread.h>
-#include "led.h"
-
-static void rt_thread_entry_led1(void* parameter)
-{
-    /* init led configuration */
-    rt_hw_led_init();
-
-    while (1)
-    {
-        /* led on */
-        rt_kprintf("led1 on\r\n");
-        rt_hw_led_on(0);
-        rt_thread_delay(50); /* sleep 0.5 second and switch to other thread */
-
-        /* led off */
-        rt_kprintf("led1 off\r\n");
-        rt_hw_led_off(0);
-        rt_thread_delay(50);
-    }
-}
-
-char thread_led2_stack[1024];
-struct rt_thread thread_led2;
-void rt_thread_entry_led2(void* parameter)
-{
-    unsigned int count=0;
-    while (1)
-    {
-        /* led on */
-        rt_kprintf("led2 on,count : %d\r\n",count);
-        count++;
-        rt_hw_led_on(1);
-        rt_thread_delay(RT_TICK_PER_SECOND);
-
-        /* led off */
-        rt_kprintf("led2 off\r\n");
-        rt_hw_led_off(1);
-        rt_thread_delay(RT_TICK_PER_SECOND);
-    }
-}
-
-int rt_application_init()
-{
-    rt_thread_t thread;
-
-    /* create led1 thread */
-    thread = rt_thread_create("led1",
-                              rt_thread_entry_led1, RT_NULL,
-                              512,
-                              20, 5);
-    if (thread != RT_NULL)
-        rt_thread_startup(thread);
-
-    //------- init led2 thread
-    rt_thread_init(&thread_led2,
-                   "led2",
-                   rt_thread_entry_led2,
-                   RT_NULL,
-                   &thread_led2_stack[0],
-                   sizeof(thread_led2_stack),10,10);
-    rt_thread_startup(&thread_led2);
-
-    return 0;
-}
-
-/*@}*/

bsp/stm3210/project_led/project.Uv2

@@ -1,156 +0,0 @@
-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Startup)
-Group (StdPeriph_Driver)
-Group (CMSIS)
-Group (Kernel)
-Group (STM32)
-
-File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
-File 1,1,<.\board.c><board.c>
-File 1,1,<.\application.c><application.c>
-File 1,1,<.\startup.c><startup.c>
-File 1,1,<.\usart.c><usart.c>
-File 1,1,<.\led.c><led.c>
-File 1,5,<.\rtconfig.h><rtconfig.h>
-File 1,5,<.\board.h><board.h>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c><stm32f10x_crc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c><stm32f10x_dac.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c><stm32f10x_dma.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c><stm32f10x_exti.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c><stm32f10x_flash.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
-File 4,1,<..\..\src\clock.c><clock.c>
-File 4,1,<..\..\src\device.c><device.c>
-File 4,1,<..\..\src\idle.c><idle.c>
-File 4,1,<..\..\src\ipc.c><ipc.c>
-File 4,1,<..\..\src\irq.c><irq.c>
-File 4,1,<..\..\src\kservice.c><kservice.c>
-File 4,1,<..\..\src\mem.c><mem.c>
-File 4,1,<..\..\src\mempool.c><mempool.c>
-File 4,1,<..\..\src\object.c><object.c>
-File 4,1,<..\..\src\scheduler.c><scheduler.c>
-File 4,1,<..\..\src\slab.c><slab.c>
-File 4,1,<..\..\src\thread.c><thread.c>
-File 4,1,<..\..\src\timer.c><timer.c>
-File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
-File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
-File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
-File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
-File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
-
-
-Options 1,0,0  // Target 'RT-Thread STM32'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD,)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC ()
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JL2CM3.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project_led/project.ewd

@@ -1,1299 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>Browse to your third-party driver</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxb.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-

bsp/stm3210/project_led/project.ewp

@@ -1,1762 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Debug\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Debug\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Debug\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>0000000</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Release\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Release\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Release\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>NDEBUG</state>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>1111111</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <group>
-    <name>CMSIS</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\core_cm3.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Kernel</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\clock.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\device.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\idle.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\irq.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mem.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\object.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\slab.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\thread.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\timer.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Startup</name>
-    <file>
-      <name>$PROJ_DIR$\application.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\led.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtconfig.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\startup.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32f10x_it.c</name>
-    </file>
-  </group>
-  <group>
-    <name>StdPeriph_Driver</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</name>
-    </file>
-  </group>
-  <group>
-    <name>STM32</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.s</name>
-    </file>
-  </group>
-</project>
-
-

bsp/stm3210/project_led/project.eww

@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<workspace>
-  <project>
-    <path>$WS_DIR$\project.ewp</path>
-  </project>
-  <batchBuild/>
-</workspace>
-
-

bsp/stm3210/project_led/rtconfig.h

@@ -1,62 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-#define RT_USING_HEAP
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART1
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-#endif

bsp/stm3210/project_led/startup.c

@@ -1,127 +0,0 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-
-#ifdef __CC_ARM
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#elif __ICCARM__
-#pragma section="HEAP"
-#else
-extern int __bss_end;
-#endif
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-#ifdef RT_USING_HEAP
-#if STM32_EXT_SRAM
-	rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
-#else
-	#ifdef __CC_ARM
-		rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
-	#elif __ICCARM__
-	    rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
-	#else
-		/* init memory system */
-		rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
-	#endif
-#endif
-#endif
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-	/* init all device */
-	rt_device_init_all();
-
-	/* init application */
-	rt_application_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_led/stm32f10x_conf.h

@@ -1,76 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_conf.h
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-/* #include "stm32f10x_adc.h" */
-#include "stm32f10x_bkp.h"
-/* #include "stm32f10x_can.h" */
-/* #include "stm32f10x_crc.h" */
-/* #include "stm32f10x_dac.h" */
-/* #include "stm32f10x_dbgmcu.h" */
-/* #include "stm32f10x_dma.h" */
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-//#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-/* #include "stm32f10x_i2c.h" */
-/* #include "stm32f10x_iwdg.h" */
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-/* #include "stm32f10x_sdio.h" */
-//#include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
-#include "stm32f10x_usart.h"
-/* #include "stm32f10x_wwdg.h" */
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *   which reports the name of the source file and the source
-  *   line number of the call that failed.
-  *   If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_led/stm32f10x_it.c

@@ -1,132 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_led/stm32f10x_it.h

@@ -1,53 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_led_simple/application.c

@@ -1,87 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <rtthread.h>
-#include "led.h"
-
-char thread_led1_stack[512];
-struct rt_thread thread_led1;
-static void rt_thread_entry_led1(void* parameter)
-{
-    /* init led configuration */
-    rt_hw_led_init();
-
-    while (1)
-    {
-        /* led on */
-        rt_kprintf("led1 on\r\n");
-        rt_hw_led_on(0);
-        rt_thread_delay(50); /* sleep 0.5 second and switch to other thread */
-
-        /* led off */
-        rt_kprintf("led1 off\r\n");
-        rt_hw_led_off(0);
-        rt_thread_delay(50);
-    }
-}
-
-char thread_led2_stack[512];
-struct rt_thread thread_led2;
-void rt_thread_entry_led2(void* parameter)
-{
-    unsigned int count=0;
-    while (1)
-    {
-        /* led on */
-        rt_kprintf("led2 on,count : %d\r\n",count);
-        count++;
-        rt_hw_led_on(1);
-        rt_thread_delay(RT_TICK_PER_SECOND);
-
-        /* led off */
-        rt_kprintf("led2 off\r\n");
-        rt_hw_led_off(1);
-        rt_thread_delay(RT_TICK_PER_SECOND);
-    }
-}
-
-int rt_application_init()
-{
-    /* init led1 thread */
-    rt_thread_init(&thread_led1,
-                   "led1",
-                   rt_thread_entry_led1,
-                   RT_NULL,
-                   &thread_led1_stack[0],
-                   sizeof(thread_led1_stack),10,10);
-    rt_thread_startup(&thread_led1);
-
-    /* init led2 thread */
-    rt_thread_init(&thread_led2,
-                   "led2",
-                   rt_thread_entry_led2,
-                   RT_NULL,
-                   &thread_led2_stack[0],
-                   sizeof(thread_led2_stack),10,10);
-    rt_thread_startup(&thread_led2);
-
-    return 0;
-}
-
-/*@}*/

bsp/stm3210/project_led_simple/project.Uv2

@@ -1,247 +0,0 @@
-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-Target (RT-Thread STM32 Simulator), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Startup)
-Group (StdPeriph_Driver)
-Group (CMSIS)
-Group (Kernel)
-Group (STM32)
-
-File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
-File 1,1,<.\board.c><board.c>
-File 1,1,<.\application.c><application.c>
-File 1,1,<.\startup.c><startup.c>
-File 1,1,<.\led.c><led.c>
-File 1,5,<.\rtconfig.h><rtconfig.h>
-File 1,5,<.\board.h><board.h>
-File 1,1,<.\usart.c><usart.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c><stm32f10x_crc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c><stm32f10x_dac.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c><stm32f10x_dma.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c><stm32f10x_exti.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c><stm32f10x_flash.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
-File 4,1,<..\..\src\clock.c><clock.c>
-File 4,1,<..\..\src\device.c><device.c>
-File 4,1,<..\..\src\idle.c><idle.c>
-File 4,1,<..\..\src\ipc.c><ipc.c>
-File 4,1,<..\..\src\irq.c><irq.c>
-File 4,1,<..\..\src\kservice.c><kservice.c>
-File 4,1,<..\..\src\mem.c><mem.c>
-File 4,1,<..\..\src\mempool.c><mempool.c>
-File 4,1,<..\..\src\object.c><object.c>
-File 4,1,<..\..\src\scheduler.c><scheduler.c>
-File 4,1,<..\..\src\slab.c><slab.c>
-File 4,1,<..\..\src\thread.c><thread.c>
-File 4,1,<..\..\src\timer.c><timer.c>
-File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
-File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
-File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
-File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
-File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
-
-
-Options 1,0,0  // Target 'RT-Thread STM32'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD,)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC ()
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JL2CM3.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-
-Options 2,0,0  // Target 'RT-Thread STM32 Simulator'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD, STM32_SIMULATOR)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC ()
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49149,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JLTAgdi.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project_led_simple/project.ewd

@@ -1,1299 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>Browse to your third-party driver</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxb.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-

bsp/stm3210/project_led_simple/project.ewp

@@ -1,1759 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Debug\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Debug\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Debug\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>0000000</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Release\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Release\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Release\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>NDEBUG</state>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>1111111</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <group>
-    <name>CMSIS</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\core_cm3.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Kernel</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\clock.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\device.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\idle.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\irq.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mem.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\object.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\slab.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\thread.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\timer.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Startup</name>
-    <file>
-      <name>$PROJ_DIR$\application.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\led.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtconfig.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\startup.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32f10x_it.c</name>
-    </file>
-  </group>
-  <group>
-    <name>StdPeriph_Driver</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</name>
-    </file>
-  </group>
-  <group>
-    <name>STM32</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.s</name>
-    </file>
-  </group>
-</project>
-
-

bsp/stm3210/project_led_simple/project.eww

@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<workspace>
-  <project>
-    <path>$WS_DIR$\project.ewp</path>
-  </project>
-  <batchBuild/>
-</workspace>
-
-

bsp/stm3210/project_led_simple/rtconfig.h

@@ -1,62 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-/* #define RT_USING_HEAP */
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART1
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-#endif

bsp/stm3210/project_led_simple/startup.c

@@ -1,101 +0,0 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-	/* init application */
-	rt_application_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_led_simple/stm32f10x_conf.h

@@ -1,76 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_conf.h
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-/* #include "stm32f10x_adc.h" */
-#include "stm32f10x_bkp.h"
-/* #include "stm32f10x_can.h" */
-/* #include "stm32f10x_crc.h" */
-/* #include "stm32f10x_dac.h" */
-/* #include "stm32f10x_dbgmcu.h" */
-/* #include "stm32f10x_dma.h" */
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-//#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-/* #include "stm32f10x_i2c.h" */
-/* #include "stm32f10x_iwdg.h" */
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-/* #include "stm32f10x_sdio.h" */
-//#include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
-#include "stm32f10x_usart.h"
-/* #include "stm32f10x_wwdg.h" */
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *   which reports the name of the source file and the source
-  *   line number of the call that failed.
-  *   If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_led_simple/stm32f10x_it.c

@@ -1,132 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_led_simple/stm32f10x_it.h

@@ -1,53 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_lwip/application.c

@@ -1,80 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <board.h>
-#include <rtthread.h>
-
-#ifdef RT_USING_LWIP
-#include <lwip/sys.h>
-#include <lwip/api.h>
-#include <netif/ethernetif.h>
-#endif
-
-void rt_init_thread_entry(void* parameter)
-{
-/* LwIP Initialization */
-#ifdef RT_USING_LWIP
-	{
-		extern void lwip_sys_init(void);
-
-		/* register ethernetif device */
-		eth_system_device_init();
-
-#ifdef STM32F10X_CL
-		rt_hw_stm32_eth_init();
-#else
-	/* STM32F103 */
-	#if STM32_ETH_IF == 0
-			rt_hw_enc28j60_init();
-	#elif STM32_ETH_IF == 1
-			rt_hw_dm9000_init();
-	#endif
-#endif
-
-		/* re-init device driver */
-		rt_device_init_all();
-
-		/* init lwip system */
-		lwip_sys_init();
-		rt_kprintf("TCP/IP initialized!\n");
-	}
-#endif
-}
-
-int rt_application_init()
-{
-	rt_thread_t init_thread;
-
-#if (RT_THREAD_PRIORITY_MAX == 32)
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 8, 20);
-#else
-	init_thread = rt_thread_create("init",
-								rt_init_thread_entry, RT_NULL,
-								2048, 80, 20);
-#endif
-
-	if (init_thread != RT_NULL)
-		rt_thread_startup(init_thread);
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_lwip/project.Uv2

@@ -1,192 +0,0 @@
-### uVision2 Project, (C) Keil Software
-### Do not modify !
-
-Target (RT-Thread STM32), 0x0004 // Tools: 'ARM-ADS'
-
-Group (Startup)
-Group (StdPeriph_Driver)
-Group (CMSIS)
-Group (Kernel)
-Group (STM32)
-Group (LwIP)
-
-File 1,1,<.\stm32f10x_it.c><stm32f10x_it.c>
-File 1,1,<.\board.c><board.c>
-File 1,1,<.\application.c><application.c>
-File 1,1,<.\startup.c><startup.c>
-File 1,1,<.\led.c><led.c>
-File 1,1,<.\usart.c><usart.c>
-File 1,1,<.\enc28j60.c><enc28j60.c>
-File 1,5,<.\rtconfig.h><rtconfig.h>
-File 1,5,<.\board.h><board.h>
-File 1,1,<.\dm9000a.c><dm9000a.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c><misc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c><stm32f10x_wwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c><stm32f10x_adc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c><stm32f10x_bkp.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c><stm32f10x_can.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c><stm32f10x_crc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c><stm32f10x_dac.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c><stm32f10x_dbgmcu.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c><stm32f10x_dma.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c><stm32f10x_exti.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c><stm32f10x_flash.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c><stm32f10x_fsmc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c><stm32f10x_gpio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c><stm32f10x_i2c.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c><stm32f10x_iwdg.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c><stm32f10x_pwr.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c><stm32f10x_rcc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c><stm32f10x_rtc.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c><stm32f10x_sdio.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c><stm32f10x_spi.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c><stm32f10x_tim.c>
-File 2,1,<.\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c><stm32f10x_usart.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\core_cm3.c><core_cm3.c>
-File 3,1,<.\Libraries\CMSIS\Core\CM3\system_stm32f10x.c><system_stm32f10x.c>
-File 4,1,<..\..\src\clock.c><clock.c>
-File 4,1,<..\..\src\device.c><device.c>
-File 4,1,<..\..\src\idle.c><idle.c>
-File 4,1,<..\..\src\ipc.c><ipc.c>
-File 4,1,<..\..\src\irq.c><irq.c>
-File 4,1,<..\..\src\kservice.c><kservice.c>
-File 4,1,<..\..\src\mem.c><mem.c>
-File 4,1,<..\..\src\mempool.c><mempool.c>
-File 4,1,<..\..\src\object.c><object.c>
-File 4,1,<..\..\src\scheduler.c><scheduler.c>
-File 4,1,<..\..\src\slab.c><slab.c>
-File 4,1,<..\..\src\thread.c><thread.c>
-File 4,1,<..\..\src\timer.c><timer.c>
-File 5,1,<..\..\libcpu\arm\stm32\cpu.c><cpu.c>
-File 5,1,<..\..\libcpu\arm\stm32\fault.c><fault.c>
-File 5,1,<..\..\libcpu\arm\stm32\interrupt.c><interrupt.c>
-File 5,1,<..\..\libcpu\arm\stm32\stack.c><stack.c>
-File 5,2,<..\..\libcpu\arm\stm32\context_rvds.S><context_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\fault_rvds.S><fault_rvds.S>
-File 5,2,<..\..\libcpu\arm\stm32\start_rvds.s><start_rvds.s>
-File 5,1,<..\..\libcpu\arm\stm32\serial.c><serial.c>
-File 6,1,<..\..\net\lwip\src\core\dhcp.c><dhcp.c>
-File 6,1,<..\..\net\lwip\src\core\dns.c><dns.c>
-File 6,1,<..\..\net\lwip\src\core\init.c><init.c>
-File 6,1,<..\..\net\lwip\src\core\memp.c><memp.c>
-File 6,1,<..\..\net\lwip\src\core\netif.c><netif.c>
-File 6,1,<..\..\net\lwip\src\core\pbuf.c><pbuf.c>
-File 6,1,<..\..\net\lwip\src\core\raw.c><raw.c>
-File 6,1,<..\..\net\lwip\src\core\stats.c><stats.c>
-File 6,1,<..\..\net\lwip\src\core\sys.c><sys.c>
-File 6,1,<..\..\net\lwip\src\core\tcp.c><tcp.c>
-File 6,1,<..\..\net\lwip\src\core\tcp_in.c><tcp_in.c>
-File 6,1,<..\..\net\lwip\src\core\tcp_out.c><tcp_out.c>
-File 6,1,<..\..\net\lwip\src\core\udp.c><udp.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\ip_frag.c><ip_frag.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\autoip.c><autoip.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\icmp.c><icmp.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\igmp.c><igmp.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\inet.c><inet.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\inet_chksum.c><inet_chksum.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\ip.c><ip.c>
-File 6,1,<..\..\net\lwip\src\core\ipv4\ip_addr.c><ip_addr.c>
-File 6,1,<..\..\net\lwip\src\api\tcpip.c><tcpip.c>
-File 6,1,<..\..\net\lwip\src\api\api_lib.c><api_lib.c>
-File 6,1,<..\..\net\lwip\src\api\api_msg.c><api_msg.c>
-File 6,1,<..\..\net\lwip\src\api\err.c><err.c>
-File 6,1,<..\..\net\lwip\src\api\netbuf.c><netbuf.c>
-File 6,1,<..\..\net\lwip\src\api\netdb.c><netdb.c>
-File 6,1,<..\..\net\lwip\src\api\netifapi.c><netifapi.c>
-File 6,1,<..\..\net\lwip\src\api\sockets.c><sockets.c>
-File 6,1,<..\..\net\lwip\src\netif\ethernetif.c><ethernetif.c>
-File 6,1,<..\..\net\lwip\src\netif\etharp.c><etharp.c>
-File 6,1,<..\..\net\lwip\src\arch\sys_arch_init.c><sys_arch_init.c>
-File 6,1,<..\..\net\lwip\src\arch\sys_arch.c><sys_arch.c>
-
-
-Options 1,0,0  // Target 'RT-Thread STM32'
- Device (STM32F103ZE)
- Vendor (STMicroelectronics)
- Cpu (IRAM(0x20000000-0x2000FFFF) IROM(0x8000000-0x807FFFF) CLOCK(8000000) CPUTYPE("Cortex-M3"))
- FlashUt ()
- StupF ("STARTUP\ST\STM32F10x.s" ("STM32 Startup Code"))
- FlashDR (UL2CM3(-O14 -S0 -C0 -N00("ARM Cortex-M3") -D00(1BA00477) -L00(4) -FO7 -FD20000000 -FC800 -FN1 -FF0STM32F10x_512 -FS08000000 -FL080000))
- DevID (4216)
- Rgf (stm32f10x_lib.h)
- Mem ()
- C ()
- A ()
- RL ()
- OH ()
- DBC_IFX ()
- DBC_CMS ()
- DBC_AMS ()
- DBC_LMS ()
- UseEnv=0
- EnvBin ()
- EnvInc ()
- EnvLib ()
- EnvReg (ÿST\STM32F10x\)
- OrgReg (ÿST\STM32F10x\)
- TgStat=16
- OutDir (.\obj\)
- OutName (rtthread-stm32)
- GenApp=1
- GenLib=0
- GenHex=0
- Debug=1
- Browse=0
- LstDir (.\obj\)
- HexSel=1
- MG32K=0
- TGMORE=0
- RunUsr 0 0 <>
- RunUsr 1 0 <>
- BrunUsr 0 0 <>
- BrunUsr 1 0 <>
- CrunUsr 0 0 <>
- CrunUsr 1 0 <>
- SVCSID <>
- GLFLAGS=1790
- ADSFLGA { 243,31,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ACPUTYP ("Cortex-M3")
- RVDEV ()
- ADSTFLGA { 0,12,0,2,99,0,0,66,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSOCM { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- OCMADSIRAM { 0,0,0,0,32,0,0,1,0 }
- OCMADSIROM { 1,0,0,0,8,0,0,8,0 }
- OCMADSXRAM { 0,0,0,0,0,0,0,0,0 }
- OCR_RVCT { 1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,0,0,0,0,0,1,0,0,0,8,0,0,8,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,32,0,0,1,0,0,0,0,0,0,0,0,0,0 }
- RV_STAVEC ()
- ADSCCFLG { 5,32,0,4,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSCMISC ()
- ADSCDEFN (USE_STDPERIPH_DRIVER, STM32F10X_HD,)
- ADSCUDEF ()
- ADSCINCD (.\Libraries\STM32F10x_StdPeriph_Driver\inc;.\Libraries\CMSIS\Core\CM3;..\..\include;.;..\..\libcpu\arm\stm32;..\..\net\lwip\src;..\..\net\lwip\src\include;..\..\net\lwip\src\arch\include;..\..\net\lwip\src\include\ipv4)
- ADSASFLG { 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSAMISC ()
- ADSADEFN ()
- ADSAUDEF ()
- ADSAINCD ()
- PropFld { 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- IncBld=1
- AlwaysBuild=0
- GenAsm=0
- AsmAsm=0
- PublicsOnly=0
- StopCode=3
- CustArgs ()
- LibMods ()
- ADSLDFG { 17,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0 }
- ADSLDTA (0x08000000)
- ADSLDDA (0x20000000)
- ADSLDSC ()
- ADSLDIB ()
- ADSLDIC ()
- ADSLDMC ()
- ADSLDIF ()
- ADSLDDW ()
-  OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 49150,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 9,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
- FLASH2 (Segger\JL2CM3.dll)
- FLASH3 ("" ())
- FLASH4 ()
-EndOpt
-

bsp/stm3210/project_lwip/project.ewd

@@ -1,1299 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxe.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>Browse to your third-party driver</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>C-SPY</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>18</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CInput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCVariant</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>MemOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MemFile</name>
-          <state>$TOOLKIT_DIR$\CONFIG\debugger\ST\iostm32f10xxb.ddf</state>
-        </option>
-        <option>
-          <name>RunToEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RunToName</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCDDFArgumentProducer</name>
-          <state></state>
-        </option>
-        <option>
-          <name>OCDownloadSuppressDownload</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDownloadVerifyAll</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDynDriverList</name>
-          <state>JLINK_ID</state>
-        </option>
-        <option>
-          <name>OCLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OCDownloadAttachToProgram</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>UseFlashLoader</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CLowLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacFile2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CDevice</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>FlashLoadersV2</name>
-          <state>,,,,(default),</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ARMSIM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCSimDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCSimEnablePSP</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspOverrideConfig</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCSimPspConfigFile</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ANGEL_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCAngelHeartbeat</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommunication</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CAngelCommBaud</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CAngelCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ANGELTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoAngelLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AngelLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>GDBSERVER_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARROM_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRomLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CRomCommunication</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRomCommBaud</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>JLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>10</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>JLinkSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCJLinkDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCJLinkHWResetDelay</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>JLinkInitialSpeed</name>
-          <state>32</state>
-        </option>
-        <option>
-          <name>CCDoJlinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCScanChainNonARMDevices</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkIRLength</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkCommRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkTCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>CCJLinkSpeedRadioV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCUSBDevice</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJLinkUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceRadio</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OCJLinkAttachSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCJLinkResetList</name>
-          <version>0</version>
-          <state>7</state>
-        </option>
-        <option>
-          <name>CCJLinkInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>LMIFTDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>LmiftdiSpeed</name>
-          <state>500</state>
-        </option>
-        <option>
-          <name>CCLmiftdiDoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLmiftdiLogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>MACRAIGOR_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>3</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>jtag</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuSpeed</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>TCPIP</name>
-          <state>aaa.bbb.ccc.ddd</state>
-        </option>
-        <option>
-          <name>DoLogfile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>LogFile</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>DoEmuMultiTarget</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>EmuMultiTarget</name>
-          <state>0@ARM7TDMI</state>
-        </option>
-        <option>
-          <name>EmuHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CEmuCommBaud</name>
-          <version>0</version>
-          <state>4</state>
-        </option>
-        <option>
-          <name>CEmuCommPort</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>jtago</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>UnusedAddr</name>
-          <state>0x00800000</state>
-        </option>
-        <option>
-          <name>CCMacraigorHWResetDelay</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCJTagBreakpointRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagDoUpdateBreakpoints</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCJTagUpdateBreakpoints</name>
-          <state>main</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceRadio</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMacraigorInterfaceCmdLine</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>RDI_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CRDIDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CRDILogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CRDILogFileEdit</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>CCRDIHWReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchReset</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchUndef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchSWI</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchData</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchPrefetch</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchIRQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDICatchFIQ</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCRDIUseETM</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>STLINK_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>THIRDPARTY_ID</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CThirdPartyDriverDll</name>
-          <state>###Uninitialized###</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CThirdPartyLogFileEditB</name>
-          <state>$PROJ_DIR$\cspycomm.log</state>
-        </option>
-        <option>
-          <name>OCDriverInfo</name>
-          <state>1</state>
-        </option>
-      </data>
-    </settings>
-    <debuggerPlugins>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\PowerPac\PowerPacRTOS.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\uCOS-II\uCOS-II-KA-CSpy.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\OSE\OseEpsilonPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\embOS\embOSPlugin.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\CMX\CmxTinyArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$TOOLKIT_DIR$\plugins\rtos\ThreadX\ThreadXArmPlugin.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\CodeCoverage\CodeCoverage.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Profiling\Profiling.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Orti\Orti.ENU.ewplugin</file>
-        <loadFlag>0</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\Stack\Stack.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-      <plugin>
-        <file>$EW_DIR$\common\plugins\SymList\SymList.ENU.ewplugin</file>
-        <loadFlag>1</loadFlag>
-      </plugin>
-    </debuggerPlugins>
-  </configuration>
-</project>
-
-

bsp/stm3210/project_lwip/project.ewp

@@ -1,1881 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<project>
-  <fileVersion>2</fileVersion>
-  <configuration>
-    <name>Debug</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>1</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Debug\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Debug\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Debug\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>No specifier n, no float nor long long, no scan set, no assignment suppressing.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>3</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>No specifier a, A, no specifier n, no float nor long long, no flags.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>0000000</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>1</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <configuration>
-    <name>Release</name>
-    <toolchain>
-      <name>ARM</name>
-    </toolchain>
-    <debug>0</debug>
-    <settings>
-      <name>General</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <version>17</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>ExePath</name>
-          <state>Release\Exe</state>
-        </option>
-        <option>
-          <name>ObjPath</name>
-          <state>Release\Obj</state>
-        </option>
-        <option>
-          <name>ListPath</name>
-          <state>Release\List</state>
-        </option>
-        <option>
-          <name>Variant</name>
-          <version>9</version>
-          <state>33</state>
-        </option>
-        <option>
-          <name>GEndianMode</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input variant</name>
-          <version>1</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Input description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>Output variant</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>Output description</name>
-          <state>Full formatting.</state>
-        </option>
-        <option>
-          <name>GOutputBinary</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FPU</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGCoreOrChip</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelect</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>GRuntimeLibSelectSlave</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>RTDescription</name>
-          <state>Use the normal configuration of the C/C++ runtime library. No locale interface, C locale, no file descriptor support, no multibytes in printf and scanf, and no hex floats in strtod.</state>
-        </option>
-        <option>
-          <name>RTConfigPath</name>
-          <state>$TOOLKIT_DIR$\INC\DLib_Config_Normal.h</state>
-        </option>
-        <option>
-          <name>OGProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>OGLastSavedByProductVersion</name>
-          <state>5.30.0.51236</state>
-        </option>
-        <option>
-          <name>GeneralEnableMisra</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraVerbose</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OGChipSelectEditMenu</name>
-          <state>STM32F10xxE	ST STM32F10xxE</state>
-        </option>
-        <option>
-          <name>GenLowLevelInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GEndianModeBE</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OGBufferedTerminalOutput</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GenStdoutInterface</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>GeneralMisraVer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>GeneralMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>ICCARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>21</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>CCDefines</name>
-          <state>NDEBUG</state>
-          <state>USE_STDPERIPH_DRIVER</state>
-          <state>STM32F10X_HD</state>
-        </option>
-        <option>
-          <name>CCPreprocFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocComments</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCPreprocLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMnemonics</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListCMessages</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCListAssSource</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagSuppress</name>
-          <state>Pa050</state>
-        </option>
-        <option>
-          <name>CCDiagRemark</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagWarning</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCDiagError</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCAllowList</name>
-          <version>1</version>
-          <state>1111111</state>
-        </option>
-        <option>
-          <name>CCDebugInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IEndianMode</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IExtraOptionsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CCLangConformance</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCSignedPlainChar</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCRequirePrototypes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCDiagWarnAreErr</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCCompilerRuntimeInfo</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>CCLangSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCLibConfigHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>PreInclude</name>
-          <state></state>
-        </option>
-        <option>
-          <name>CompilerMisraOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCIncludePath2</name>
-          <state>$PROJ_DIR$\.</state>
-          <state>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\inc</state>
-          <state>$PROJ_DIR$\Libraries\CMSIS\Core\CM3</state>
-          <state>$PROJ_DIR$\..\..\include</state>
-          <state>$PROJ_DIR$\..\..\libcpu\arm\stm32</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\arch\include</state>
-          <state>$PROJ_DIR$\..\..\net\lwip\src\include\ipv4</state>
-        </option>
-        <option>
-          <name>CCStdIncCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCStdIncludePath</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>CCCodeSection</name>
-          <state>.text</state>
-        </option>
-        <option>
-          <name>IInterwork2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IProcessorMode2</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CCOptLevel</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CCOptStrategy</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CCOptLevelSlave</name>
-          <state>3</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules98</name>
-          <version>0</version>
-          <state>1000111110110101101110011100111111101110011011000101110111101101100111111111111100110011111001110111001111111111111111111111111</state>
-        </option>
-        <option>
-          <name>CompilerMisraRules04</name>
-          <version>0</version>
-          <state>111101110010111111111000110111111111111111111111111110010111101111010101111111111111111111111111101111111011111001111011111011111111111111111</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>AARM</name>
-      <archiveVersion>2</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>AObjPrefix</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AEndian</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>ACaseSensitivity</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacroChars</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnEnable</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnWhat</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AWarnOne</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange1</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AWarnRange2</name>
-          <state></state>
-        </option>
-        <option>
-          <name>ADebug</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AltRegisterNames</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ADefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AList</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AListHeader</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AListing</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>Includes</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacDefs</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MacExps</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>MacExec</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OnlyAssed</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>MultiLine</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLengthCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>PageLength</name>
-          <state>80</state>
-        </option>
-        <option>
-          <name>TabSpacing</name>
-          <state>8</state>
-        </option>
-        <option>
-          <name>AXRef</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDefines</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefInternal</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AXRefDual</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AFpuProcessor</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>AOutputFile</name>
-          <state>$FILE_BNAME$.o</state>
-        </option>
-        <option>
-          <name>AMultibyteSupport</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsCheck</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>ALimitErrorsEdit</name>
-          <state>100</state>
-        </option>
-        <option>
-          <name>AIgnoreStdInclude</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AStdIncludes</name>
-          <state>$TOOLKIT_DIR$\INC\</state>
-        </option>
-        <option>
-          <name>AUserIncludes</name>
-          <state></state>
-        </option>
-        <option>
-          <name>AExtraOptionsCheckV2</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>AExtraOptionsV2</name>
-          <state></state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>OBJCOPY</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>1</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>OOCOutputFormat</name>
-          <version>2</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OCOutputOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>OOCOutputFile</name>
-          <state>project.srec</state>
-        </option>
-        <option>
-          <name>OOCCommandLineProducer</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>OOCObjCopyEnable</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>CUSTOM</name>
-      <archiveVersion>3</archiveVersion>
-      <data>
-        <extensions></extensions>
-        <cmdline></cmdline>
-      </data>
-    </settings>
-    <settings>
-      <name>BICOMP</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-    <settings>
-      <name>BUILDACTION</name>
-      <archiveVersion>1</archiveVersion>
-      <data>
-        <prebuild></prebuild>
-        <postbuild></postbuild>
-      </data>
-    </settings>
-    <settings>
-      <name>ILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>7</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IlinkLibIOConfig</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>XLinkMisraHandler</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkInputFileSlave</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkOutputFile</name>
-          <state>project.out</state>
-        </option>
-        <option>
-          <name>IlinkDebugInfoEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkKeepSymbols</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryFile</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySymbol</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinarySegment</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkRawBinaryAlign</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkConfigDefines</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkMapFile</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkLogFile</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogInitialization</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogModule</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogSection</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkLogVeneer</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkIcfOverride</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkIcfFile</name>
-          <state>$PROJ_DIR$\stm32f10x_flash.icf</state>
-        </option>
-        <option>
-          <name>IlinkIcfFileSlave</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkEnableRemarks</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkSuppressDiags</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsRem</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsWarn</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkTreatAsErr</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkWarningsAreErrors</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkUseExtraOptions</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkExtraOptions</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkLowLevelInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAutoLibEnable</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkAdditionalLibs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IlinkOverrideProgramEntryLabel</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabelSelect</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkProgramEntryLabel</name>
-          <state>__iar_program_start</state>
-        </option>
-        <option>
-          <name>IlinkNXPLPCChecksum</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>DoFill</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>FillerByte</name>
-          <state>0xFF</state>
-        </option>
-        <option>
-          <name>FillerStart</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>FillerEnd</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>CrcSize</name>
-          <version>0</version>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlign</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcAlgo</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcPoly</name>
-          <state>0x11021</state>
-        </option>
-        <option>
-          <name>CrcCompl</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcBitOrder</name>
-          <version>0</version>
-          <state>0</state>
-        </option>
-        <option>
-          <name>CrcInitialValue</name>
-          <state>0x0</state>
-        </option>
-        <option>
-          <name>DoCrc</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IlinkBE8Slave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkBufferedTerminalOutput</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>IlinkStdoutInterfaceSlave</name>
-          <state>1</state>
-        </option>
-        <option>
-          <name>CrcFullSize</name>
-          <state>0</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>IARCHIVE</name>
-      <archiveVersion>0</archiveVersion>
-      <data>
-        <version>0</version>
-        <wantNonLocal>1</wantNonLocal>
-        <debug>0</debug>
-        <option>
-          <name>IarchiveInputs</name>
-          <state></state>
-        </option>
-        <option>
-          <name>IarchiveOverride</name>
-          <state>0</state>
-        </option>
-        <option>
-          <name>IarchiveOutput</name>
-          <state>###Unitialized###</state>
-        </option>
-      </data>
-    </settings>
-    <settings>
-      <name>BILINK</name>
-      <archiveVersion>0</archiveVersion>
-      <data/>
-    </settings>
-  </configuration>
-  <group>
-    <name>CMSIS</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\core_cm3.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\CMSIS\Core\CM3\system_stm32f10x.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Kernel</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\clock.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\device.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\idle.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\ipc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\irq.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\kservice.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mem.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\mempool.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\object.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\scheduler.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\slab.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\thread.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\src\timer.c</name>
-    </file>
-  </group>
-  <group>
-    <name>LwIP</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_lib.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\api_msg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\autoip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dhcp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\dns.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\err.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\etharp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\netif\ethernetif.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\icmp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\igmp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\inet_chksum.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_addr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\ipv4\ip_frag.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\memp_tiny.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netbuf.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netdb.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\netif.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\netifapi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\pbuf.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\raw.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\sockets.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\stats.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\sys.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\arch\sys_arch_init.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_in.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\tcp_out.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\api\tcpip.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\net\lwip\src\core\udp.c</name>
-    </file>
-  </group>
-  <group>
-    <name>Startup</name>
-    <file>
-      <name>$PROJ_DIR$\application.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\board.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\enc28j60.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\led.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\rtconfig.h</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\startup.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\stm32f10x_it.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\usart.c</name>
-    </file>
-  </group>
-  <group>
-    <name>StdPeriph_Driver</name>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\misc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_adc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_bkp.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_can.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_crc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dac.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dbgmcu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_dma.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_exti.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_flash.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_fsmc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_gpio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_i2c.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_iwdg.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_pwr.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rcc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_rtc.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_sdio.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_spi.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_tim.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_usart.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\Libraries\STM32F10x_StdPeriph_Driver\src\stm32f10x_wwdg.c</name>
-    </file>
-  </group>
-  <group>
-    <name>STM32</name>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\context_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\cpu.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\fault_iar.S</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\interrupt.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\serial.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\stack.c</name>
-    </file>
-    <file>
-      <name>$PROJ_DIR$\..\..\libcpu\arm\stm32\start_iar.s</name>
-    </file>
-  </group>
-</project>
-
-

bsp/stm3210/project_lwip/project.eww

@@ -1,10 +0,0 @@
-<?xml version="1.0" encoding="iso-8859-1"?>
-
-<workspace>
-  <project>
-    <path>$WS_DIR$\project.ewp</path>
-  </project>
-  <batchBuild/>
-</workspace>
-
-

bsp/stm3210/project_lwip/rtconfig.h

@@ -1,112 +0,0 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* Using Software Timer */
-/* #define RT_USING_TIMER_SOFT */
-#define RT_TIMER_THREAD_PRIO		4
-#define RT_TIMER_THREAD_STACK_SIZE	512
-#define RT_TIMER_TICK_PER_SECOND	10
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-#define RT_USING_HEAP
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART1
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-/* SECTION: lwip, a lighwight TCP/IP protocol stack */
-#define RT_USING_LWIP
-/* LwIP uses RT-Thread Memory Management */
-#define RT_LWIP_USING_RT_MEM
-/* Enable ICMP protocol*/
-#define RT_LWIP_ICMP
-/* Enable UDP protocol*/
-#define RT_LWIP_UDP
-/* Enable TCP protocol*/
-#define RT_LWIP_TCP
-/* Enable DNS */
-#define RT_LWIP_DNS
-
-/* the number of simulatenously active TCP connections*/
-#define RT_LWIP_TCP_PCB_NUM	5
-
-/* ip address of target*/
-#define RT_LWIP_IPADDR0	192
-#define RT_LWIP_IPADDR1	168
-#define RT_LWIP_IPADDR2	1
-#define RT_LWIP_IPADDR3	30
-
-/* gateway address of target*/
-#define RT_LWIP_GWADDR0	192
-#define RT_LWIP_GWADDR1	168
-#define RT_LWIP_GWADDR2	1
-#define RT_LWIP_GWADDR3	1
-
-/* mask address of target*/
-#define RT_LWIP_MSKADDR0	255
-#define RT_LWIP_MSKADDR1	255
-#define RT_LWIP_MSKADDR2	255
-#define RT_LWIP_MSKADDR3	0
-
-/* tcp thread options */
-#define RT_LWIP_TCPTHREAD_PRIORITY		12
-#define RT_LWIP_TCPTHREAD_MBOX_SIZE		4
-#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
-
-/* ethernet if thread options */
-#define RT_LWIP_ETHTHREAD_PRIORITY		15
-#define RT_LWIP_ETHTHREAD_MBOX_SIZE		4
-#define RT_LWIP_ETHTHREAD_STACKSIZE		512
-
-#endif

bsp/stm3210/project_lwip/startup.c

@@ -1,137 +0,0 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-#ifdef RT_USING_FINSH
-extern void finsh_system_init(void);
-extern void finsh_set_device(const char* device);
-#endif
-
-#ifdef __CC_ARM
-extern int Image$$RW_IRAM1$$ZI$$Limit;
-#elif __ICCARM__
-#pragma section="HEAP"
-#else
-extern int __bss_end;
-#endif
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-#ifdef RT_USING_HEAP
-#if STM32_EXT_SRAM
-	rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
-#else
-	#ifdef __CC_ARM
-		rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
-	#elif __ICCARM__
-	    rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
-	#else
-		/* init memory system */
-		rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
-	#endif
-#endif
-#endif
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-	/* init application */
-	rt_application_init();
-
-#ifdef RT_USING_FINSH
-	/* init finsh */
-	finsh_system_init();
-	finsh_set_device("uart1");
-#endif
-
-    /* init timer thread */
-    rt_system_timer_thread_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/

bsp/stm3210/project_lwip/stm32f10x_conf.h

@@ -1,76 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_conf.h
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-/* #include "stm32f10x_adc.h" */
-#include "stm32f10x_bkp.h"
-/* #include "stm32f10x_can.h" */
-/* #include "stm32f10x_crc.h" */
-/* #include "stm32f10x_dac.h" */
-/* #include "stm32f10x_dbgmcu.h" */
-/* #include "stm32f10x_dma.h" */
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-//#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-/* #include "stm32f10x_i2c.h" */
-/* #include "stm32f10x_iwdg.h" */
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-/* #include "stm32f10x_sdio.h" */
-//#include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
-#include "stm32f10x_usart.h"
-/* #include "stm32f10x_wwdg.h" */
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *   which reports the name of the source file and the source
-  *   line number of the call that failed.
-  *   If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_lwip/stm32f10x_it.c

@@ -1,330 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-#include <board.h>
-#include <rtthread.h>
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/*******************************************************************************
-* Function Name  : DMA1_Channel2_IRQHandler
-* Description    : This function handles DMA1 Channel 2 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void DMA1_Channel2_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_dma_tx_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    if (DMA_GetITStatus(DMA1_IT_TC2))
-    {
-        /* transmission complete, invoke serial dma tx isr */
-        rt_hw_serial_dma_tx_isr(&uart3_device);
-    }
-
-    /* clear DMA flag */
-    DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART1_IRQHandler
-* Description    : This function handles USART1 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART1_IRQHandler(void)
-{
-#ifdef RT_USING_UART1
-    extern struct rt_device uart1_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart1_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART2_IRQHandler
-* Description    : This function handles USART2 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART2_IRQHandler(void)
-{
-#ifdef RT_USING_UART2
-    extern struct rt_device uart2_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart2_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-/*******************************************************************************
-* Function Name  : USART3_IRQHandler
-* Description    : This function handles USART3 global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void USART3_IRQHandler(void)
-{
-#ifdef RT_USING_UART3
-    extern struct rt_device uart3_device;
-	extern void rt_hw_serial_isr(struct rt_device *device);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    rt_hw_serial_isr(&uart3_device);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-#endif
-}
-
-#if defined(RT_USING_DFS) && STM32_USE_SDIO
-/*******************************************************************************
-* Function Name  : SDIO_IRQHandler
-* Description    : This function handles SDIO global interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void SDIO_IRQHandler(void)
-{
-    extern int SD_ProcessIRQSrc(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    /* Process All SDIO Interrupt Sources */
-    SD_ProcessIRQSrc();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#ifdef RT_USING_LWIP
-#ifdef STM32F10X_CL
-/*******************************************************************************
-* Function Name  : ETH_IRQHandler
-* Description    : This function handles ETH interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void ETH_IRQHandler(void)
-{
-	extern void rt_hw_stm32_eth_isr(void);
-	
-    /* enter interrupt */
-    rt_interrupt_enter();
-	
-	rt_hw_stm32_eth_isr();
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#else
-#if (STM32_ETH_IF == 0)
-/*******************************************************************************
-* Function Name  : EXTI0_IRQHandler
-* Description    : This function handles External interrupt Line 0 request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI0_IRQHandler(void)
-{
-    extern void enc28j60_isr(void);
-
-    /* enter interrupt */
-    rt_interrupt_enter();
-
-    enc28j60_isr();
-
-    /* Clear the Key Button EXTI line pending bit */
-    EXTI_ClearITPendingBit(EXTI_Line0);
-
-    /* leave interrupt */
-    rt_interrupt_leave();
-}
-#endif
-
-#if (STM32_ETH_IF == 1)
-/*******************************************************************************
-* Function Name  : EXTI9_5_IRQHandler
-* Description    : This function handles External lines 9 to 5 interrupt request.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void EXTI9_5_IRQHandler(void)
-{
-	extern void rt_dm9000_isr(void);
-
-	/* enter interrupt */
-	rt_interrupt_enter();
-
-	rt_dm9000_isr();
-
-	/* Clear the Key Button EXTI line pending bit */
-	EXTI_ClearITPendingBit(EXTI_Line7);
-
-	/* leave interrupt */
-	rt_interrupt_leave();
-}
-#endif
-#endif
-#endif /* end of RT_USING_LWIP */
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/project_lwip/stm32f10x_it.h

@@ -1,53 +0,0 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/rtconfig.h

@@ -1,62 +1,129 @@
-/* RT-Thread config file */
-#ifndef __RTTHREAD_CFG_H__
-#define __RTTHREAD_CFG_H__
-
-/* RT_NAME_MAX*/
-#define RT_NAME_MAX	8
-
-/* RT_ALIGN_SIZE*/
-#define RT_ALIGN_SIZE	4
-
-/* PRIORITY_MAX */
-#define RT_THREAD_PRIORITY_MAX	32
-
-/* Tick per Second */
-#define RT_TICK_PER_SECOND	100
-
-/* SECTION: RT_DEBUG */
-/* Thread Debug */
-#define RT_DEBUG
-#define RT_THREAD_DEBUG
-
-#define RT_USING_OVERFLOW_CHECK
-
-/* Using Hook */
-#define RT_USING_HOOK
-
-/* SECTION: IPC */
-/* Using Semaphore*/
-#define RT_USING_SEMAPHORE
-
-/* Using Mutex */
-#define RT_USING_MUTEX
-
-/* Using Event */
-#define RT_USING_EVENT
-
-/* Using MailBox */
-#define RT_USING_MAILBOX
-
-/* Using Message Queue */
-#define RT_USING_MESSAGEQUEUE
-
-/* SECTION: Memory Management */
-/* Using Memory Pool Management*/
-#define RT_USING_MEMPOOL
-
-/* Using Dynamic Heap Management */
-/* #define RT_USING_HEAP */
-
-/* Using Small MM */
-#define RT_USING_SMALL_MEM
-
-/* SECTION: Device System */
-/* Using Device System */
-#define RT_USING_DEVICE
-#define RT_USING_UART1
-
-/* SECTION: Console options */
-/* the buffer size of console*/
-#define RT_CONSOLEBUF_SIZE	128
-
-#endif
+/* RT-Thread config file */
+#ifndef __RTTHREAD_CFG_H__
+#define __RTTHREAD_CFG_H__
+
+/* RT_NAME_MAX*/
+#define RT_NAME_MAX	8
+
+/* RT_ALIGN_SIZE*/
+#define RT_ALIGN_SIZE	4
+
+/* PRIORITY_MAX */
+#define RT_THREAD_PRIORITY_MAX	32
+
+/* Tick per Second */
+#define RT_TICK_PER_SECOND	100
+
+/* SECTION: RT_DEBUG */
+/* Thread Debug */
+#define RT_DEBUG
+#define RT_THREAD_DEBUG
+
+#define RT_USING_OVERFLOW_CHECK
+
+/* Using Hook */
+#define RT_USING_HOOK
+
+/* Using Software Timer */
+/* #define RT_USING_TIMER_SOFT */
+#define RT_TIMER_THREAD_PRIO		4
+#define RT_TIMER_THREAD_STACK_SIZE	512
+#define RT_TIMER_TICK_PER_SECOND	10
+
+/* SECTION: IPC */
+/* Using Semaphore*/
+#define RT_USING_SEMAPHORE
+
+/* Using Mutex */
+#define RT_USING_MUTEX
+
+/* Using Event */
+#define RT_USING_EVENT
+
+/* Using MailBox */
+#define RT_USING_MAILBOX
+
+/* Using Message Queue */
+#define RT_USING_MESSAGEQUEUE
+
+/* SECTION: Memory Management */
+/* Using Memory Pool Management*/
+#define RT_USING_MEMPOOL
+
+/* Using Dynamic Heap Management */
+#define RT_USING_HEAP
+
+/* Using Small MM */
+#define RT_USING_SMALL_MEM
+
+/* SECTION: Device System */
+/* Using Device System */
+#define RT_USING_DEVICE
+#define RT_USING_UART1
+
+/* SECTION: Console options */
+/* the buffer size of console*/
+#define RT_CONSOLEBUF_SIZE	128
+
+/* SECTION: finsh, a C-Express shell */
+#define RT_USING_FINSH
+/* Using symbol table */
+#define FINSH_USING_SYMTAB
+#define FINSH_USING_DESCRIPTION
+
+/* SECTION: device filesystem */
+#define RT_USING_DFS
+#define RT_USING_DFS_ELMFAT
+
+/* the max number of mounted filesystem */
+#define DFS_FILESYSTEMS_MAX			2
+/* the max number of opened files 		*/
+#define DFS_FD_MAX					4
+/* the max number of cached sector 		*/
+#define DFS_CACHE_MAX_NUM   		4
+
+/* SECTION: lwip, a lighwight TCP/IP protocol stack */
+#define RT_USING_LWIP
+/* LwIP uses RT-Thread Memory Management */
+#define RT_LWIP_USING_RT_MEM
+/* Enable ICMP protocol*/
+#define RT_LWIP_ICMP
+/* Enable UDP protocol*/
+#define RT_LWIP_UDP
+/* Enable TCP protocol*/
+#define RT_LWIP_TCP
+/* Enable DNS */
+#define RT_LWIP_DNS
+
+/* the number of simulatenously active TCP connections*/
+#define RT_LWIP_TCP_PCB_NUM	5
+
+/* ip address of target*/
+#define RT_LWIP_IPADDR0	192
+#define RT_LWIP_IPADDR1	168
+#define RT_LWIP_IPADDR2	1
+#define RT_LWIP_IPADDR3	30
+
+/* gateway address of target*/
+#define RT_LWIP_GWADDR0	192
+#define RT_LWIP_GWADDR1	168
+#define RT_LWIP_GWADDR2	1
+#define RT_LWIP_GWADDR3	1
+
+/* mask address of target*/
+#define RT_LWIP_MSKADDR0	255
+#define RT_LWIP_MSKADDR1	255
+#define RT_LWIP_MSKADDR2	255
+#define RT_LWIP_MSKADDR3	0
+
+/* tcp thread options */
+#define RT_LWIP_TCPTHREAD_PRIORITY		12
+#define RT_LWIP_TCPTHREAD_MBOX_SIZE		4
+#define RT_LWIP_TCPTHREAD_STACKSIZE		1024
+
+/* ethernet if thread options */
+#define RT_LWIP_ETHTHREAD_PRIORITY		15
+#define RT_LWIP_ETHTHREAD_MBOX_SIZE		4
+#define RT_LWIP_ETHTHREAD_STACKSIZE		512
+
+#endif

bsp/stm3210/startup.c

@@ -1,101 +1,152 @@
-/*
- * File      : startup.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-31     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x.h"
-#include "board.h"
-
-/**
- * @addtogroup STM32
- */
-
-/*@{*/
-
-extern int  rt_application_init(void);
-
-#ifdef  DEBUG
-/*******************************************************************************
-* Function Name  : assert_failed
-* Description    : Reports the name of the source file and the source line number
-*                  where the assert error has occurred.
-* Input          : - file: pointer to the source file name
-*                  - line: assert error line source number
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void assert_failed(u8* file, u32 line)
-{
-	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
-	rt_kprintf("       file  %s\r\n", file);
-	rt_kprintf("       line  %d\r\n", line);
-
-	while (1) ;
-}
-#endif
-
-/**
- * This function will startup RT-Thread RTOS.
- */
-void rtthread_startup(void)
-{
-	/* init board */
-	rt_hw_board_init();
-
-	/* show version */
-	rt_show_version();
-
-	/* init tick */
-	rt_system_tick_init();
-
-	/* init kernel object */
-	rt_system_object_init();
-
-	/* init timer system */
-	rt_system_timer_init();
-
-	/* init scheduler system */
-	rt_system_scheduler_init();
-
-	/* init application */
-	rt_application_init();
-
-	/* init idle thread */
-	rt_thread_idle_init();
-
-	/* start scheduler */
-	rt_system_scheduler_start();
-
-	/* never reach here */
-	return ;
-}
-
-int main(void)
-{
-	rt_uint32_t UNUSED level;
-
-	/* disable interrupt first */
-	level = rt_hw_interrupt_disable();
-
-	/* init system setting */
-	SystemInit();
-
-	/* startup RT-Thread RTOS */
-	rtthread_startup();
-
-	return 0;
-}
-
-/*@}*/
+/*
+ * File      : startup.c
+ * This file is part of RT-Thread RTOS
+ * COPYRIGHT (C) 2006, RT-Thread Develop Team
+ *
+ * The license and distribution terms for this file may be
+ * found in the file LICENSE in this distribution or at
+ * http://openlab.rt-thread.com/license/LICENSE
+ *
+ * Change Logs:
+ * Date           Author       Notes
+ * 2006-08-31     Bernard      first implementation
+ */
+
+#include <rthw.h>
+#include <rtthread.h>
+
+#include "stm32f10x.h"
+#include "board.h"
+#include "rtc.h"
+
+/**
+ * @addtogroup STM32
+ */
+
+/*@{*/
+
+extern int  rt_application_init(void);
+#ifdef RT_USING_FINSH
+extern void finsh_system_init(void);
+extern void finsh_set_device(const char* device);
+#endif
+
+#ifdef __CC_ARM
+extern int Image$$RW_IRAM1$$ZI$$Limit;
+#elif __ICCARM__
+#pragma section="HEAP"
+#else
+extern int __bss_end;
+#endif
+
+#ifdef  DEBUG
+/*******************************************************************************
+* Function Name  : assert_failed
+* Description    : Reports the name of the source file and the source line number
+*                  where the assert error has occurred.
+* Input          : - file: pointer to the source file name
+*                  - line: assert error line source number
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void assert_failed(u8* file, u32 line)
+{
+	rt_kprintf("\n\r Wrong parameter value detected on\r\n");
+	rt_kprintf("       file  %s\r\n", file);
+	rt_kprintf("       line  %d\r\n", line);
+
+	while (1) ;
+}
+#endif
+
+/**
+ * This function will startup RT-Thread RTOS.
+ */
+void rtthread_startup(void)
+{
+	/* init board */
+	rt_hw_board_init();
+
+	/* show version */
+	rt_show_version();
+
+	/* init tick */
+	rt_system_tick_init();
+
+	/* init kernel object */
+	rt_system_object_init();
+
+	/* init timer system */
+	rt_system_timer_init();
+
+#ifdef RT_USING_HEAP
+#if STM32_EXT_SRAM
+	rt_system_heap_init((void*)STM32_EXT_SRAM_BEGIN, (void*)STM32_EXT_SRAM_END);
+#else
+	#ifdef __CC_ARM
+		rt_system_heap_init((void*)&Image$$RW_IRAM1$$ZI$$Limit, (void*)STM32_SRAM_END);
+	#elif __ICCARM__
+	    rt_system_heap_init(__segment_end("HEAP"), (void*)STM32_SRAM_END);
+	#else
+		/* init memory system */
+		rt_system_heap_init((void*)&__bss_end, (void*)STM32_SRAM_END);
+	#endif
+#endif
+#endif
+
+	/* init scheduler system */
+	rt_system_scheduler_init();
+
+#ifdef RT_USING_DFS
+	/* init sdcard driver */
+#if STM32_USE_SDIO
+	rt_hw_sdcard_init();
+#else
+	rt_hw_msd_init();
+#endif
+#endif
+
+    rt_hw_rtc_init();
+
+	/* init all device */
+	rt_device_init_all();
+
+	/* init application */
+	rt_application_init();
+
+#ifdef RT_USING_FINSH
+	/* init finsh */
+	finsh_system_init();
+	finsh_set_device("uart1");
+#endif
+
+    /* init timer thread */
+    rt_system_timer_thread_init();
+
+	/* init idle thread */
+	rt_thread_idle_init();
+
+	/* start scheduler */
+	rt_system_scheduler_start();
+
+	/* never reach here */
+	return ;
+}
+
+int main(void)
+{
+	rt_uint32_t UNUSED level;
+
+	/* disable interrupt first */
+	level = rt_hw_interrupt_disable();
+
+	/* init system setting */
+	SystemInit();
+
+	/* startup RT-Thread RTOS */
+	rtthread_startup();
+
+	return 0;
+}
+
+/*@}*/

bsp/stm3210/stm32f10x_conf.h

@@ -1,76 +1,76 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_conf.h
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Library configuration file.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CONF_H
-#define __STM32F10x_CONF_H
-
-/* Includes ------------------------------------------------------------------*/
-/* Uncomment the line below to enable peripheral header file inclusion */
-/* #include "stm32f10x_adc.h" */
-#include "stm32f10x_bkp.h"
-/* #include "stm32f10x_can.h" */
-/* #include "stm32f10x_crc.h" */
-/* #include "stm32f10x_dac.h" */
-/* #include "stm32f10x_dbgmcu.h" */
-/* #include "stm32f10x_dma.h" */
-#include "stm32f10x_exti.h"
-#include "stm32f10x_flash.h"
-//#include "stm32f10x_fsmc.h"
-#include "stm32f10x_gpio.h"
-/* #include "stm32f10x_i2c.h" */
-/* #include "stm32f10x_iwdg.h" */
-#include "stm32f10x_pwr.h"
-#include "stm32f10x_rcc.h"
-#include "stm32f10x_rtc.h"
-/* #include "stm32f10x_sdio.h" */
-//#include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
-#include "stm32f10x_usart.h"
-/* #include "stm32f10x_wwdg.h" */
-#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Uncomment the line below to expanse the "assert_param" macro in the
-   Standard Peripheral Library drivers code */
-/* #define USE_FULL_ASSERT    1 */
-
-/* Exported macro ------------------------------------------------------------*/
-#ifdef  USE_FULL_ASSERT
-
-/**
-  * @brief  The assert_param macro is used for function's parameters check.
-  * @param  expr: If expr is false, it calls assert_failed function
-  *   which reports the name of the source file and the source
-  *   line number of the call that failed.
-  *   If expr is true, it returns no value.
-  * @retval None
-  */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
-/* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
-#else
-  #define assert_param(expr) ((void)0)
-#endif /* USE_FULL_ASSERT */
-
-#endif /* __STM32F10x_CONF_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    Project/Template/stm32f10x_conf.h
+  * @author  MCD Application Team
+  * @version V3.1.0
+  * @date    06/19/2009
+  * @brief   Library configuration file.
+  ******************************************************************************
+  * @copy
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
+  */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_CONF_H
+#define __STM32F10x_CONF_H
+
+/* Includes ------------------------------------------------------------------*/
+/* Uncomment the line below to enable peripheral header file inclusion */
+/* #include "stm32f10x_adc.h" */
+#include "stm32f10x_bkp.h"
+/* #include "stm32f10x_can.h" */
+/* #include "stm32f10x_crc.h" */
+/* #include "stm32f10x_dac.h" */
+/* #include "stm32f10x_dbgmcu.h" */
+/* #include "stm32f10x_dma.h" */
+#include "stm32f10x_exti.h"
+#include "stm32f10x_flash.h"
+//#include "stm32f10x_fsmc.h"
+#include "stm32f10x_gpio.h"
+/* #include "stm32f10x_i2c.h" */
+/* #include "stm32f10x_iwdg.h" */
+#include "stm32f10x_pwr.h"
+#include "stm32f10x_rcc.h"
+#include "stm32f10x_rtc.h"
+/* #include "stm32f10x_sdio.h" */
+//#include "stm32f10x_spi.h"
+/* #include "stm32f10x_tim.h" */
+#include "stm32f10x_usart.h"
+/* #include "stm32f10x_wwdg.h" */
+#include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Uncomment the line below to expanse the "assert_param" macro in the
+   Standard Peripheral Library drivers code */
+/* #define USE_FULL_ASSERT    1 */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr: If expr is false, it calls assert_failed function
+  *   which reports the name of the source file and the source
+  *   line number of the call that failed.
+  *   If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0)
+#endif /* USE_FULL_ASSERT */
+
+#endif /* __STM32F10x_CONF_H */
+
+/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/stm32f10x_it.c

@@ -1,132 +1,330 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.c 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   Main Interrupt Service Routines.
-  *          This file provides template for all exceptions handler and 
-  *          peripherals interrupt service routine.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_it.h"
-
-/** @addtogroup Template_Project
-  * @{
-  */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/******************************************************************************/
-/*            Cortex-M3 Processor Exceptions Handlers                         */
-/******************************************************************************/
-
-/**
-  * @brief   This function handles NMI exception.
-  * @param  None
-  * @retval None
-  */
-void NMI_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Hard Fault exception.
-  * @param  None
-  * @retval None
-  */
-void HardFault_Handler(void)
-{
-  /* Go to infinite loop when Hard Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Memory Manage exception.
-  * @param  None
-  * @retval None
-  */
-void MemManage_Handler(void)
-{
-  /* Go to infinite loop when Memory Manage exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Bus Fault exception.
-  * @param  None
-  * @retval None
-  */
-void BusFault_Handler(void)
-{
-  /* Go to infinite loop when Bus Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles Usage Fault exception.
-  * @param  None
-  * @retval None
-  */
-void UsageFault_Handler(void)
-{
-  /* Go to infinite loop when Usage Fault exception occurs */
-  while (1)
-  {
-  }
-}
-
-/**
-  * @brief  This function handles SVCall exception.
-  * @param  None
-  * @retval None
-  */
-void SVC_Handler(void)
-{
-}
-
-/**
-  * @brief  This function handles Debug Monitor exception.
-  * @param  None
-  * @retval None
-  */
-void DebugMon_Handler(void)
-{
-}
-
-/******************************************************************************/
-/*                 STM32F10x Peripherals Interrupt Handlers                   */
-/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
-/*  available peripheral interrupt handler's name please refer to the startup */
-/*  file (startup_stm32f10x_xx.s).                                            */
-/******************************************************************************/
-
-/**
-  * @}
-  */ 
-
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    Project/Template/stm32f10x_it.c 
+  * @author  MCD Application Team
+  * @version V3.1.0
+  * @date    06/19/2009
+  * @brief   Main Interrupt Service Routines.
+  *          This file provides template for all exceptions handler and 
+  *          peripherals interrupt service routine.
+  ******************************************************************************
+  * @copy
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
+  */ 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x_it.h"
+#include <board.h>
+#include <rtthread.h>
+
+/** @addtogroup Template_Project
+  * @{
+  */
+
+/* Private typedef -----------------------------------------------------------*/
+/* Private define ------------------------------------------------------------*/
+/* Private macro -------------------------------------------------------------*/
+/* Private variables ---------------------------------------------------------*/
+/* Private function prototypes -----------------------------------------------*/
+/* Private functions ---------------------------------------------------------*/
+
+/******************************************************************************/
+/*            Cortex-M3 Processor Exceptions Handlers                         */
+/******************************************************************************/
+
+/**
+  * @brief   This function handles NMI exception.
+  * @param  None
+  * @retval None
+  */
+void NMI_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Hard Fault exception.
+  * @param  None
+  * @retval None
+  */
+void HardFault_Handler(void)
+{
+  /* Go to infinite loop when Hard Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Memory Manage exception.
+  * @param  None
+  * @retval None
+  */
+void MemManage_Handler(void)
+{
+  /* Go to infinite loop when Memory Manage exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Bus Fault exception.
+  * @param  None
+  * @retval None
+  */
+void BusFault_Handler(void)
+{
+  /* Go to infinite loop when Bus Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles Usage Fault exception.
+  * @param  None
+  * @retval None
+  */
+void UsageFault_Handler(void)
+{
+  /* Go to infinite loop when Usage Fault exception occurs */
+  while (1)
+  {
+  }
+}
+
+/**
+  * @brief  This function handles SVCall exception.
+  * @param  None
+  * @retval None
+  */
+void SVC_Handler(void)
+{
+}
+
+/**
+  * @brief  This function handles Debug Monitor exception.
+  * @param  None
+  * @retval None
+  */
+void DebugMon_Handler(void)
+{
+}
+
+/******************************************************************************/
+/*                 STM32F10x Peripherals Interrupt Handlers                   */
+/*  Add here the Interrupt Handler for the used peripheral(s) (PPP), for the  */
+/*  available peripheral interrupt handler's name please refer to the startup */
+/*  file (startup_stm32f10x_xx.s).                                            */
+/******************************************************************************/
+
+/*******************************************************************************
+* Function Name  : DMA1_Channel2_IRQHandler
+* Description    : This function handles DMA1 Channel 2 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void DMA1_Channel2_IRQHandler(void)
+{
+#ifdef RT_USING_UART3
+    extern struct rt_device uart3_device;
+	extern void rt_hw_serial_dma_tx_isr(struct rt_device *device);
+
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    if (DMA_GetITStatus(DMA1_IT_TC2))
+    {
+        /* transmission complete, invoke serial dma tx isr */
+        rt_hw_serial_dma_tx_isr(&uart3_device);
+    }
+
+    /* clear DMA flag */
+    DMA_ClearFlag(DMA1_FLAG_TC2 | DMA1_FLAG_TE2);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : USART1_IRQHandler
+* Description    : This function handles USART1 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USART1_IRQHandler(void)
+{
+#ifdef RT_USING_UART1
+    extern struct rt_device uart1_device;
+	extern void rt_hw_serial_isr(struct rt_device *device);
+	
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    rt_hw_serial_isr(&uart1_device);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : USART2_IRQHandler
+* Description    : This function handles USART2 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USART2_IRQHandler(void)
+{
+#ifdef RT_USING_UART2
+    extern struct rt_device uart2_device;
+	extern void rt_hw_serial_isr(struct rt_device *device);
+
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    rt_hw_serial_isr(&uart2_device);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+#endif
+}
+
+/*******************************************************************************
+* Function Name  : USART3_IRQHandler
+* Description    : This function handles USART3 global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void USART3_IRQHandler(void)
+{
+#ifdef RT_USING_UART3
+    extern struct rt_device uart3_device;
+	extern void rt_hw_serial_isr(struct rt_device *device);
+
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    rt_hw_serial_isr(&uart3_device);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+#endif
+}
+
+#if defined(RT_USING_DFS) && STM32_USE_SDIO
+/*******************************************************************************
+* Function Name  : SDIO_IRQHandler
+* Description    : This function handles SDIO global interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void SDIO_IRQHandler(void)
+{
+    extern int SD_ProcessIRQSrc(void);
+
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    /* Process All SDIO Interrupt Sources */
+    SD_ProcessIRQSrc();
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif
+
+#ifdef RT_USING_LWIP
+#ifdef STM32F10X_CL
+/*******************************************************************************
+* Function Name  : ETH_IRQHandler
+* Description    : This function handles ETH interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void ETH_IRQHandler(void)
+{
+	extern void rt_hw_stm32_eth_isr(void);
+	
+    /* enter interrupt */
+    rt_interrupt_enter();
+	
+	rt_hw_stm32_eth_isr();
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#else
+#if (STM32_ETH_IF == 0)
+/*******************************************************************************
+* Function Name  : EXTI0_IRQHandler
+* Description    : This function handles External interrupt Line 0 request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI0_IRQHandler(void)
+{
+    extern void enc28j60_isr(void);
+
+    /* enter interrupt */
+    rt_interrupt_enter();
+
+    enc28j60_isr();
+
+    /* Clear the Key Button EXTI line pending bit */
+    EXTI_ClearITPendingBit(EXTI_Line0);
+
+    /* leave interrupt */
+    rt_interrupt_leave();
+}
+#endif
+
+#if (STM32_ETH_IF == 1)
+/*******************************************************************************
+* Function Name  : EXTI9_5_IRQHandler
+* Description    : This function handles External lines 9 to 5 interrupt request.
+* Input          : None
+* Output         : None
+* Return         : None
+*******************************************************************************/
+void EXTI9_5_IRQHandler(void)
+{
+	extern void rt_dm9000_isr(void);
+
+	/* enter interrupt */
+	rt_interrupt_enter();
+
+	rt_dm9000_isr();
+
+	/* Clear the Key Button EXTI line pending bit */
+	EXTI_ClearITPendingBit(EXTI_Line7);
+
+	/* leave interrupt */
+	rt_interrupt_leave();
+}
+#endif
+#endif
+#endif /* end of RT_USING_LWIP */
+
+/**
+  * @}
+  */ 
+
+
+/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stm3210/stm32f10x_it.h

@@ -1,53 +1,53 @@
-/**
-  ******************************************************************************
-  * @file    Project/Template/stm32f10x_it.h 
-  * @author  MCD Application Team
-  * @version V3.1.0
-  * @date    06/19/2009
-  * @brief   This file contains the headers of the interrupt handlers.
-  ******************************************************************************
-  * @copy
-  *
-  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
-  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
-  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
-  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
-  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-  *
-  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
-  */ 
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_IT_H
-#define __STM32F10x_IT_H
-
-#ifdef __cplusplus
- extern "C" {
-#endif 
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-
-void NMI_Handler(void);
-void HardFault_Handler(void);
-void MemManage_Handler(void);
-void BusFault_Handler(void);
-void UsageFault_Handler(void);
-void SVC_Handler(void);
-void DebugMon_Handler(void);
-void PendSV_Handler(void);
-void SysTick_Handler(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* __STM32F10x_IT_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
+/**
+  ******************************************************************************
+  * @file    Project/Template/stm32f10x_it.h 
+  * @author  MCD Application Team
+  * @version V3.1.0
+  * @date    06/19/2009
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @copy
+  *
+  * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
+  * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
+  * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
+  * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
+  * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
+  * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
+  *
+  * <h2><center>&copy; COPYRIGHT 2009 STMicroelectronics</center></h2>
+  */ 
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F10x_IT_H
+#define __STM32F10x_IT_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif 
+
+/* Includes ------------------------------------------------------------------*/
+#include "stm32f10x.h"
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+/* Exported macro ------------------------------------------------------------*/
+/* Exported functions ------------------------------------------------------- */
+
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F10x_IT_H */
+
+/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/application.c

@@ -1,27 +0,0 @@
-/*
- * File      : application.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Development Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rt-thread.org/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2009-01-05     Bernard      the first version
- */
-
-/**
- * @addtogroup STM32
- */
-/*@{*/
-
-#include <rtthread.h>
-
-int rt_application_init()
-{
-	return 0;
-}
-
-/*@}*/

bsp/stmsky001/board.c

@@ -1,260 +0,0 @@
-/*
- * File      : board.c
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006 - 2009 RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-08-23     Bernard      first implementation
- */
-
-#include <rthw.h>
-#include <rtthread.h>
-
-#include "stm32f10x_lib.h"
-
-static void rt_hw_console_init(void);
-
-/**
- * @addtogroup STM32SKY
- */
-
-/*@{*/
-
-ErrorStatus HSEStartUpStatus;
-
-/*******************************************************************************
- * Function Name  : RCC_Configuration
- * Description    : Configures the different system clocks.
- * Input          : None
- * Output         : None
- * Return         : None
- *******************************************************************************/
-void RCC_Configuration(void)
-{
-	/* RCC system reset(for debug purpose) */
-	RCC_DeInit();
-
-	/* Enable HSE */
-	RCC_HSEConfig(RCC_HSE_ON);
-
-	/* Wait till HSE is ready */
-	HSEStartUpStatus = RCC_WaitForHSEStartUp();
-
-	if(HSEStartUpStatus == SUCCESS)
-	{
-		/* HCLK = SYSCLK */
-		RCC_HCLKConfig(RCC_SYSCLK_Div1);
-
-		/* PCLK2 = HCLK */
-		RCC_PCLK2Config(RCC_HCLK_Div1);
-		/* PCLK1 = HCLK/2 */
-		RCC_PCLK1Config(RCC_HCLK_Div2);
-
-		/* Flash 2 wait state */
-		FLASH_SetLatency(FLASH_Latency_2);
-		/* Enable Prefetch Buffer */
-		FLASH_PrefetchBufferCmd(FLASH_PrefetchBuffer_Enable);
-
-		/* PLLCLK = 8MHz * 9 = 72 MHz */
-		RCC_PLLConfig(RCC_PLLSource_HSE_Div1, RCC_PLLMul_9);
-
-		/* Enable PLL */
-		RCC_PLLCmd(ENABLE);
-
-		/* Wait till PLL is ready */
-		while(RCC_GetFlagStatus(RCC_FLAG_PLLRDY) == RESET) ;
-
-		/* Select PLL as system clock source */
-		RCC_SYSCLKConfig(RCC_SYSCLKSource_PLLCLK);
-
-		/* Wait till PLL is used as system clock source */
-		while(RCC_GetSYSCLKSource() != 0x08) ;
-	}
-}
-
-/*******************************************************************************
-* Function Name  : NVIC_Configuration
-* Description    : Configures Vector Table base location.
-* Input          : None
-* Output         : None
-* Return         : None
-*******************************************************************************/
-void NVIC_Configuration(void)
-{
-#ifdef  VECT_TAB_RAM
-	/* Set the Vector Table base location at 0x20000000 */
-	NVIC_SetVectorTable(NVIC_VectTab_RAM, 0x0);
-#else  /* VECT_TAB_FLASH  */
-	/* Set the Vector Table base location at 0x08000000 */
-	NVIC_SetVectorTable(NVIC_VectTab_FLASH, 0x0);
-#endif
-}
-
-/*******************************************************************************
- * Function Name  : SysTick_Configuration
- * Description    : Configures the SysTick for OS tick.
- * Input          : None
- * Output         : None
- * Return         : None
- *******************************************************************************/
-void  SysTick_Configuration(void)
-{
-    RCC_ClocksTypeDef  rcc_clocks;
-    rt_uint32_t         cnts;
-
-    RCC_GetClocksFreq(&rcc_clocks);
-
-    cnts = (rt_uint32_t)rcc_clocks.HCLK_Frequency / RT_TICK_PER_SECOND;
-
-    SysTick_SetReload(cnts);
-    SysTick_CLKSourceConfig(SysTick_CLKSource_HCLK);
-    SysTick_CounterCmd(SysTick_Counter_Enable);
-    SysTick_ITConfig(ENABLE);
-}
-
-extern void rt_hw_interrupt_thread_switch(void);
-/**
- * This is the timer interrupt service routine.
- * 
- */
-void rt_hw_timer_handler(void)
-{
-	/* enter interrupt */
-	rt_interrupt_enter();
-
-	rt_tick_increase();
-	
-	/* leave interrupt */
-	rt_interrupt_leave();
-	rt_hw_interrupt_thread_switch();
-}
-
-static void FSMC_SRAM_Init(void)
-{
-#define REG32(x)	(*(volatile unsigned long*)(x))
-
-	/* enable FSMC clock */
-	REG32(0x40021014) = 0x114;
-	
-	/* enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
-	REG32(0x40021018) = 0x1e0;
-	
-	/* SRAM Data lines, NOE and NWE configuration */
-	REG32(0x40011400) = 0x44BB44BB;
-	REG32(0x40011404) = 0xBBBBBBBB;
-	REG32(0x40011800) = 0xB44444BB;
-	REG32(0x40011804) = 0xBBBBBBBB;
-	REG32(0x40011C00) = 0x44BBBBBB;
-	REG32(0x40011C04) = 0xBBBB4444;
-	REG32(0x40012000) = 0x44BBBBBB;
-	REG32(0x40012004) = 0x44444B44;
-	
-	/* FSMC Configuration (enable FSMC Bank1_SRAM Bank) */
-	REG32(0xA0000010) = 0x00001011;
-	REG32(0xA0000014) = 0x00000200;
-}
-
-
-/**
- * This function will initial STM32 board.
- */
-void rt_hw_board_init()
-{
-	/* Configure the system clocks */
-	RCC_Configuration();
-
-	/* NVIC Configuration */
-	NVIC_Configuration();
-	
-	/* Configure the SysTick */
-	SysTick_Configuration();
-	
-	/* Configure SRAM on the board */
-	FSMC_SRAM_Init();
-	
-	rt_hw_console_init();
-}
-
-/* init console to support rt_kprintf */
-static void rt_hw_console_init()
-{
-	/* Enable USART1 and GPIOA clocks */
-	RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1 | RCC_APB2Periph_GPIOA, ENABLE);
-
-	/* GPIO configuration */
-	{
-	GPIO_InitTypeDef GPIO_InitStructure;
-
-	/* Configure USART1 Tx (PA.09) as alternate function push-pull */
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9;
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-	GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-	GPIO_Init(GPIOA, &GPIO_InitStructure);
-
-	/* Configure USART1 Rx (PA.10) as input floating */
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_10;
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-	GPIO_Init(GPIOA, &GPIO_InitStructure);
-	}
-
-	/* USART configuration */
-	{
-	USART_InitTypeDef USART_InitStructure;
-	
-	/* USART1 configured as follow:
-		- BaudRate = 115200 baud
-		- Word Length = 8 Bits
-		- One Stop Bit
-		- No parity
-		- Hardware flow control disabled (RTS and CTS signals)
-		- Receive and transmit enabled
-		- USART Clock disabled
-		- USART CPOL: Clock is active low
-		- USART CPHA: Data is captured on the middle
-		- USART LastBit: The clock pulse of the last data bit is not output to
-		  the SCLK pin
-	*/
-	USART_InitStructure.USART_BaudRate = 115200;
-	USART_InitStructure.USART_WordLength = USART_WordLength_8b;
-	USART_InitStructure.USART_StopBits = USART_StopBits_1;
-	USART_InitStructure.USART_Parity = USART_Parity_No;
-	USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None;
-	USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx;
-	USART_Init(USART1, &USART_InitStructure);
-	/* Enable USART1 */
-	USART_Cmd(USART1, ENABLE);
-	}
-}
-
-/* write one character to serial, must not trigger interrupt */
-static void rt_hw_console_putc(const char c)
-{
-	/*
-		to be polite with serial console add a line feed
-		to the carriage return character
-	*/
-	if (c=='\n')rt_hw_console_putc('\r');
-
-	while (!(USART1->SR & USART_FLAG_TXE));
-	USART1->DR = (c & 0x1FF);
-}
-
-/**
- * This function is used by rt_kprintf to display a string on console.
- * 
- * @param str the displayed string
- */
-void rt_hw_console_output(const char* str)
-{
-	while (*str)
-	{
-		rt_hw_console_putc (*str++);
-	}
-}
-
-/*@}*/

bsp/stmsky001/board.h

@@ -1,30 +0,0 @@
-/*
- * File      : board.h
- * This file is part of RT-Thread RTOS
- * COPYRIGHT (C) 2006, RT-Thread Develop Team
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://openlab.rt-thread.com/license/LICENSE
- *
- * Change Logs:
- * Date           Author       Notes
- * 2006-10-08     Bernard      add board.h to this bsp
- */
-
-#ifndef __BOARD_H__
-#define __BOARD_H__
-
-#define RT_USING_BOARD_SRAM
-
-#define BOARD_SRAM_BEGIN	0x68000000
-#define BOARD_SRAM_END		0x68080000
-
-void rt_hw_board_led_on(int n);
-void rt_hw_board_led_off(int n);
-void rt_hw_board_init(void);
-
-void rt_hw_usart_init(void);
-void rt_hw_sdcard_init(void);
-
-#endif

bsp/stmsky001/cortexm3_macro.s

@@ -1,279 +0,0 @@
-;******************** (C) COPYRIGHT 2007 STMicroelectronics ********************
-;* File Name          : cortexm3_macro.s
-;* Author             : MCD Application Team
-;* Version            : V1.1
-;* Date               : 11/26/2007
-;* Description        : Instruction wrappers for special Cortex-M3 instructions.
-;*******************************************************************************
-; THE PRESENT SOFTWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-; WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-; AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-; INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-; CONTENT OF SUCH SOFTWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-; INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-;*******************************************************************************
-    
-  THUMB
-  REQUIRE8
-  PRESERVE8
-    
-  AREA |.text|, CODE, READONLY, ALIGN=2
-
-  ; Exported functions
-  EXPORT __WFI
-  EXPORT __WFE
-  EXPORT __SEV
-  EXPORT __ISB
-  EXPORT __DSB
-  EXPORT __DMB
-  EXPORT __SVC
-  EXPORT __MRS_CONTROL
-  EXPORT __MSR_CONTROL
-  EXPORT __MRS_PSP
-  EXPORT __MSR_PSP
-  EXPORT __MRS_MSP
-  EXPORT __MSR_MSP   
-  EXPORT __SETPRIMASK
-  EXPORT __RESETPRIMASK
-  EXPORT __SETFAULTMASK
-  EXPORT __RESETFAULTMASK
-  EXPORT __BASEPRICONFIG
-  EXPORT __GetBASEPRI
-  EXPORT __REV_HalfWord
-  EXPORT __REV_Word
-
-;*******************************************************************************
-; Function Name  : __WFI
-; Description    : Assembler function for the WFI instruction.
-; Input          : None
-; Return         : None
-;*******************************************************************************
-__WFI 
- 
-    WFI
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __WFE
-; Description    : Assembler function for the WFE instruction.
-; Input          : None
-; Return         : None
-;*******************************************************************************
-__WFE
-
-    WFE
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __SEV
-; Description    : Assembler function for the SEV instruction.
-; Input          : None
-; Return         : None
-;*******************************************************************************
-__SEV
-
-    SEV
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __ISB
-; Description    : Assembler function for the ISB instruction.
-; Input          : None
-; Return         : None
-;*******************************************************************************
-__ISB
-
-    ISB
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __DSB
-; Description    : Assembler function for the DSB instruction.
-; Input          : None
-; Return         : None
-;*******************************************************************************
-__DSB
-
-    DSB
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __DMB
-; Description    : Assembler function for the DMB instruction.
-; Input          : None
-; Return         : None
-;*******************************************************************************
-__DMB
-
-    DMB
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __SVC
-; Description    : Assembler function for the SVC instruction.
-; Input          : None
-; Return         : None
-;*******************************************************************************
-__SVC
-
-    SVC 0x01
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __MRS_CONTROL
-; Description    : Assembler function for the MRS instruction.
-; Input          : None
-; Return         : - r0 : Cortex-M3 CONTROL register value.
-;*******************************************************************************
-__MRS_CONTROL
-
-  MRS r0, CONTROL
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __MSR_CONTROL
-; Description    : Assembler function for the MSR instruction.
-; Input          : - r0 : Cortex-M3 CONTROL register new value.  
-; Return         : None
-;*******************************************************************************
-__MSR_CONTROL
-
-  MSR CONTROL, r0
-  ISB
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __MRS_PSP
-; Description    : Assembler function for the MRS instruction.
-; Input          : None
-; Return         : - r0 : Process Stack value.
-;*******************************************************************************
-__MRS_PSP
-
-  MRS r0, PSP
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __MSR_PSP
-; Description    : Assembler function for the MSR instruction.
-; Input          : - r0 : Process Stack new value.  
-; Return         : None
-;*******************************************************************************
-__MSR_PSP 
- 
-    MSR PSP, r0 ; set Process Stack value
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __MRS_MSP
-; Description    : Assembler function for the MRS instruction.
-; Input          : None
-; Return         : - r0 : Main Stack value.
-;*******************************************************************************
-__MRS_MSP
-
-  MRS r0, MSP
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __MSR_MSP
-; Description    : Assembler function for the MSR instruction.
-; Input          : - r0 : Main Stack new value.  
-; Return         : None
-;*******************************************************************************
-__MSR_MSP 
- 
-    MSR MSP, r0 ; set Main Stack value
-    BX r14
-
-;*******************************************************************************
-; Function Name  : __SETPRIMASK
-; Description    : Assembler function to set the PRIMASK.
-; Input          : None 
-; Return         : None
-;*******************************************************************************
-__SETPRIMASK
-
-  CPSID i
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __RESETPRIMASK
-; Description    : Assembler function to reset the PRIMASK.
-; Input          : None 
-; Return         : None
-;*******************************************************************************
-__RESETPRIMASK
-
-  CPSIE i
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __SETFAULTMASK
-; Description    : Assembler function to set the FAULTMASK.
-; Input          : None 
-; Return         : None
-;*******************************************************************************
-__SETFAULTMASK
-
-  CPSID f
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __RESETFAULTMASK
-; Description    : Assembler function to reset the FAULTMASK.
-; Input          : None 
-; Return         : None
-;*******************************************************************************
-__RESETFAULTMASK
-
-  CPSIE f
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __BASEPRICONFIG
-; Description    : Assembler function to set the Base Priority.
-; Input          : - r0 : Base Priority new value  
-; Return         : None
-;*******************************************************************************
-__BASEPRICONFIG
-
-  MSR BASEPRI, r0
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __GetBASEPRI
-; Description    : Assembler function to get the Base Priority value.
-; Input          : None 
-; Return         : - r0 : Base Priority value 
-;*******************************************************************************
-__GetBASEPRI
-
-  MRS r0, BASEPRI_MAX
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __REV_HalfWord
-; Description    : Reverses the byte order in HalfWord(16-bit) input variable.
-; Input          : - r0 : specifies the input variable
-; Return         : - r0 : holds tve variable value after byte reversing.
-;*******************************************************************************
-__REV_HalfWord 
- 
-  REV16 r0, r0
-  BX r14
-
-;*******************************************************************************
-; Function Name  : __REV_Word
-; Description    : Reverses the byte order in Word(32-bit) input variable.
-; Input          : - r0 : specifies the input variable
-; Return         : - r0 : holds tve variable value after byte reversing.
-;*******************************************************************************
-__REV_Word 
- 
-  REV r0, r0
-  BX r14
-    
-  END
-  
-;******************* (C) COPYRIGHT 2007 STMicroelectronics *****END OF FILE*****

bsp/stmsky001/enc28j60.c

@@ -1,727 +0,0 @@
-#include "enc28j60.h"
-
-#include <netif/ethernetif.h>
-#include "lwipopts.h"
-#include "stm32f10x_lib.h"
-
-#define MAX_ADDR_LEN    6
-
-// #define CSACTIVE    GPIO_ResetBits(GPIOB,  GPIO_Pin_12);
-// #define CSPASSIVE   GPIO_SetBits(GPIOB,  GPIO_Pin_12);
-#define CSACTIVE 	GPIOB->BRR = GPIO_Pin_12;
-#define CSPASSIVE	GPIOB->BSRR = GPIO_Pin_12;
-
-struct net_device
-{
-	/* inherit from ethernet device */
-	struct eth_device parent;
-
-	/* interface address info. */
-	rt_uint8_t  dev_addr[MAX_ADDR_LEN];			/* hw address	*/
-};
-
-static struct net_device  enc28j60_dev_entry;
-static struct net_device *enc28j60_dev =&enc28j60_dev_entry;
-static rt_uint8_t  Enc28j60Bank;
-static rt_uint16_t NextPacketPtr;
-static struct rt_semaphore tx_sem;
-
-void _delay_us(rt_uint32_t us)
-{
-	rt_uint32_t len;
-	for (;us > 0; us --)
-		for (len = 0; len < 20; len++ );
-}
-
-void delay_ms(rt_uint32_t ms)
-{
-	rt_uint32_t len;
-	for (;ms > 0; ms --)
-		for (len = 0; len < 100; len++ );
-}
-
-rt_uint8_t spi_read_op(rt_uint8_t op, rt_uint8_t address)
-{
-	int temp=0;
-	CSACTIVE;
-
-	SPI_I2S_SendData(SPI2, (op | (address & ADDR_MASK)));
-	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-	SPI_I2S_ReceiveData(SPI2);
-	SPI_I2S_SendData(SPI2, 0x00);
-	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-
-	// do dummy read if needed (for mac and mii, see datasheet page 29)
-	if(address & 0x80)
-	{
-		SPI_I2S_ReceiveData(SPI2);
-		SPI_I2S_SendData(SPI2, 0x00);
-		while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-	}
-	// release CS
-
-	temp=SPI_I2S_ReceiveData(SPI2);
-	// for(t=0;t<20;t++);
-	CSPASSIVE;
-	return (temp);
-}
-
-void spi_write_op(rt_uint8_t op, rt_uint8_t address, rt_uint8_t data)
-{
-	rt_uint32_t level;
-	
-	level = rt_hw_interrupt_disable();
-	
-	CSACTIVE;
-	SPI_I2S_SendData(SPI2, op | (address & ADDR_MASK));
-	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-	SPI_I2S_SendData(SPI2,data);
-	while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-	CSPASSIVE;
-	
-	rt_hw_interrupt_enable(level);
-}
-
-void enc28j60_set_bank(rt_uint8_t address)
-{
-	// set the bank (if needed)
-	if((address & BANK_MASK) != Enc28j60Bank)
-	{
-		// set the bank
-		spi_write_op(ENC28J60_BIT_FIELD_CLR, ECON1, (ECON1_BSEL1|ECON1_BSEL0));
-		spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, (address & BANK_MASK)>>5);
-		Enc28j60Bank = (address & BANK_MASK);
-	}
-}
-
-rt_uint8_t spi_read(rt_uint8_t address)
-{
-	// set the bank
-	enc28j60_set_bank(address);
-	// do the read
-	return spi_read_op(ENC28J60_READ_CTRL_REG, address);
-}
-
-void spi_write(rt_uint8_t address, rt_uint8_t data)
-{
-	// set the bank
-	enc28j60_set_bank(address);
-	// do the write
-	spi_write_op(ENC28J60_WRITE_CTRL_REG, address, data);
-}
-
-void enc28j60_phy_write(rt_uint8_t address, rt_uint16_t data)
-{
-	// set the PHY register address
-	spi_write(MIREGADR, address);
-
-	// write the PHY data
-	spi_write(MIWRL, data);
-	spi_write(MIWRH, data>>8);
-
-	// wait until the PHY write completes
-	while(spi_read(MISTAT) & MISTAT_BUSY)
-	{
-		_delay_us(15);
-	}
-}
-
-// read upper 8 bits
-rt_uint16_t enc28j60_phy_read(rt_uint8_t address)
-{
-	// Set the right address and start the register read operation
-	spi_write(MIREGADR, address);
-	spi_write(MICMD, MICMD_MIIRD);
-
-	_delay_us(15);
-
-	// wait until the PHY read completes
-	while(spi_read(MISTAT) & MISTAT_BUSY);
-
-	// reset reading bit
-	spi_write(MICMD, 0x00);
-
-	return (spi_read(MIRDH));
-}
-
-void enc28j60_clkout(rt_uint8_t clk)
-{
-	//setup clkout: 2 is 12.5MHz:
-	spi_write(ECOCON, clk & 0x7);
-}
-
-/*
- * Access the PHY to determine link status
- */
-static void enc28j60_check_link_status()
-{
-	rt_uint16_t reg;
-	int duplex;
-
-	reg = enc28j60_phy_read(PHSTAT2);
-	duplex = reg & PHSTAT2_DPXSTAT;
-
-	if (reg & PHSTAT2_LSTAT)
-	{
-	    /* on */
-	}
-	else
-	{
-	    /* off */
-	}
-}
-
-#ifdef RT_USING_FINSH
-#include <finsh.h>
-/*
- * Debug routine to dump useful register contents
- */
-static void enc28j60(void)
-{
-	rt_kprintf("-- enc28j60 registers:\n");
-	rt_kprintf("HwRevID: 0x%02x\n", spi_read(EREVID));
-	rt_kprintf("Cntrl: ECON1 ECON2 ESTAT  EIR  EIE\n");
-	rt_kprintf("       0x%02x  0x%02x  0x%02x  0x%02x  0x%02x\n",spi_read(ECON1), spi_read(ECON2), spi_read(ESTAT), spi_read(EIR), spi_read(EIE));
-	rt_kprintf("MAC  : MACON1 MACON3 MACON4\n");
-	rt_kprintf("       0x%02x   0x%02x   0x%02x\n", spi_read(MACON1), spi_read(MACON3), spi_read(MACON4));
-	rt_kprintf("Rx   : ERXST  ERXND  ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n");
-	rt_kprintf("       0x%04x 0x%04x 0x%04x  0x%04x  ",
-		(spi_read(ERXSTH) << 8) | spi_read(ERXSTL),
-		(spi_read(ERXNDH) << 8) | spi_read(ERXNDL),
-		(spi_read(ERXWRPTH) << 8) | spi_read(ERXWRPTL),
-		(spi_read(ERXRDPTH) << 8) | spi_read(ERXRDPTL));
-	rt_kprintf("0x%02x    0x%02x    0x%04x\n", spi_read(ERXFCON), spi_read(EPKTCNT),
-		(spi_read(MAMXFLH) << 8) | spi_read(MAMXFLL));
-
-	rt_kprintf("Tx   : ETXST  ETXND  MACLCON1 MACLCON2 MAPHSUP\n");
-	rt_kprintf("       0x%04x 0x%04x 0x%02x     0x%02x     0x%02x\n",
-		(spi_read(ETXSTH) << 8) | spi_read(ETXSTL),
-		(spi_read(ETXNDH) << 8) | spi_read(ETXNDL),
-		spi_read(MACLCON1), spi_read(MACLCON2), spi_read(MAPHSUP));
-}
-FINSH_FUNCTION_EXPORT(enc28j60, dump enc28j60 registers)
-#endif
-
-/*
- * RX handler
- * ignore PKTIF because is unreliable! (look at the errata datasheet)
- * check EPKTCNT is the suggested workaround.
- * We don't need to clear interrupt flag, automatically done when
- * enc28j60_hw_rx() decrements the packet counter.
- * Returns how many packet processed.
- */
-void enc28j60_isr()
-{
-	/* Variable definitions can be made now. */
-	volatile rt_uint32_t eir, pk_counter;
-	volatile rt_bool_t rx_activiated;
-	
-	rx_activiated = RT_FALSE;
-	
-	/* get EIR */
-	eir = spi_read(EIR);
-	// rt_kprintf("eir: 0x%08x\n", eir);
-
-	do
-	{
-		/* errata #4, PKTIF does not reliable */
-	    pk_counter = spi_read(EPKTCNT);
-	    if (pk_counter)
-	    {
-	        rt_err_t result;
-	        /* a frame has been received */
-	        result = eth_device_ready((struct eth_device*)&(enc28j60_dev->parent));
-	        RT_ASSERT(result == RT_EOK);
-			
-			// switch to bank 0
-			enc28j60_set_bank(EIE);
-			// disable rx interrutps
-			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIE, EIE_PKTIE);
-	    }
-	
-		/* clear PKTIF */
-		if (eir & EIR_PKTIF)
-		{
-			enc28j60_set_bank(EIR);
-			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_PKTIF);
-			
-			rx_activiated = RT_TRUE;
-		}
-	
-		/* clear DMAIF */
-	    if (eir & EIR_DMAIF)
-		{
-			enc28j60_set_bank(EIR);
-			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_DMAIF);
-		}
-	
-	    /* LINK changed handler */
-	    if ( eir & EIR_LINKIF)
-	    {
-	        enc28j60_check_link_status();
-	
-	        /* read PHIR to clear the flag */
-	        enc28j60_phy_read(PHIR);
-	
-			enc28j60_set_bank(EIR);
-			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_LINKIF);
-	    }
-	
-		if (eir & EIR_TXIF)
-		{
-			/* A frame has been transmitted. */
-			rt_sem_release(&tx_sem);
-	
-			enc28j60_set_bank(EIR);
-			spi_write_op(ENC28J60_BIT_FIELD_CLR, EIR, EIR_TXIF);
-		}
-		eir = spi_read(EIR);
-		// rt_kprintf("inner eir: 0x%08x\n", eir);
-	} while ((rx_activiated != RT_TRUE && eir != 0));
-}
-
-/* RT-Thread Device Interface */
-
-/* initialize the interface */
-rt_err_t enc28j60_init(rt_device_t dev)
-{
-	CSPASSIVE;
-
-	// perform system reset
-	spi_write_op(ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
-	delay_ms(50);
-	NextPacketPtr = RXSTART_INIT;
-
-    // Rx start
-	spi_write(ERXSTL, RXSTART_INIT&0xFF);
-	spi_write(ERXSTH, RXSTART_INIT>>8);
-	// set receive pointer address
-	spi_write(ERXRDPTL, RXSTOP_INIT&0xFF);
-	spi_write(ERXRDPTH, RXSTOP_INIT>>8);
-	// RX end
-	spi_write(ERXNDL, RXSTOP_INIT&0xFF);
-	spi_write(ERXNDH, RXSTOP_INIT>>8);
-
-	// TX start
-	spi_write(ETXSTL, TXSTART_INIT&0xFF);
-	spi_write(ETXSTH, TXSTART_INIT>>8);
-	// set transmission pointer address
-	spi_write(EWRPTL, TXSTART_INIT&0xFF);
-	spi_write(EWRPTH, TXSTART_INIT>>8);
-	// TX end
-	spi_write(ETXNDL, TXSTOP_INIT&0xFF);
-	spi_write(ETXNDH, TXSTOP_INIT>>8);
-
-	// do bank 1 stuff, packet filter:
-    // For broadcast packets we allow only ARP packtets
-    // All other packets should be unicast only for our mac (MAADR)
-    //
-    // The pattern to match on is therefore
-    // Type     ETH.DST
-    // ARP      BROADCAST
-    // 06 08 -- ff ff ff ff ff ff -> ip checksum for theses bytes=f7f9
-    // in binary these poitions are:11 0000 0011 1111
-    // This is hex 303F->EPMM0=0x3f,EPMM1=0x30
-	spi_write(ERXFCON, ERXFCON_UCEN|ERXFCON_CRCEN|ERXFCON_BCEN);
-
-	// do bank 2 stuff
-	// enable MAC receive
-	spi_write(MACON1, MACON1_MARXEN|MACON1_TXPAUS|MACON1_RXPAUS);
-	// enable automatic padding to 60bytes and CRC operations
-	// spi_write_op(ENC28J60_BIT_FIELD_SET, MACON3, MACON3_PADCFG0|MACON3_TXCRCEN|MACON3_FRMLNEN);
-	spi_write_op(ENC28J60_BIT_FIELD_SET, MACON3, MACON3_PADCFG0 | MACON3_TXCRCEN | MACON3_FRMLNEN | MACON3_FULDPX);
-	// bring MAC out of reset
-
-	// set inter-frame gap (back-to-back)
-	// spi_write(MABBIPG, 0x12);
-	spi_write(MABBIPG, 0x15);
-
-	spi_write(MACON4, MACON4_DEFER);
-	spi_write(MACLCON2, 63);
-
-	// set inter-frame gap (non-back-to-back)
-	spi_write(MAIPGL, 0x12);
-	spi_write(MAIPGH, 0x0C);
-
-	// Set the maximum packet size which the controller will accept
-	// Do not send packets longer than MAX_FRAMELEN:
-	spi_write(MAMXFLL, MAX_FRAMELEN&0xFF);
-	spi_write(MAMXFLH, MAX_FRAMELEN>>8);
-
-    // do bank 3 stuff
-    // write MAC address
-    // NOTE: MAC address in ENC28J60 is byte-backward
-    spi_write(MAADR0, enc28j60_dev->dev_addr[5]);
-    spi_write(MAADR1, enc28j60_dev->dev_addr[4]);
-    spi_write(MAADR2, enc28j60_dev->dev_addr[3]);
-    spi_write(MAADR3, enc28j60_dev->dev_addr[2]);
-    spi_write(MAADR4, enc28j60_dev->dev_addr[1]);
-    spi_write(MAADR5, enc28j60_dev->dev_addr[0]);
-
-	/* output off */
-	spi_write(ECOCON, 0x00);
-
-	// enc28j60_phy_write(PHCON1, 0x00);
-	enc28j60_phy_write(PHCON1, PHCON1_PDPXMD); // full duplex
-    // no loopback of transmitted frames
-	enc28j60_phy_write(PHCON2, PHCON2_HDLDIS);
-
-	enc28j60_set_bank(ECON2);
-	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON2, ECON2_AUTOINC);
-
-	// switch to bank 0
-	enc28j60_set_bank(ECON1);
-	// enable interrutps
-	spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_INTIE|EIE_PKTIE|EIR_TXIF);
-	// enable packet reception
-	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN);
-
-	/* clock out */
-	// enc28j60_clkout(2);
-
-	enc28j60_phy_write(PHLCON, 0xD76);	//0x476
-	delay_ms(20);
-
-    rt_kprintf("enc28j60 init ok!\n");
-
-    return RT_EOK;
-}
-
-/* control the interface */
-rt_err_t enc28j60_control(rt_device_t dev, rt_uint8_t cmd, void *args)
-{
-	switch(cmd)
-	{
-	case NIOCTL_GADDR:
-		/* get mac address */
-		if(args) rt_memcpy(args, enc28j60_dev_entry.dev_addr, 6);
-		else return -RT_ERROR;
-		break;
-
-	default :
-		break;
-	}
-
-	return RT_EOK;
-}
-
-/* Open the ethernet interface */
-rt_err_t enc28j60_open(rt_device_t dev, rt_uint16_t oflag)
-{
-	return RT_EOK;
-}
-
-/* Close the interface */
-rt_err_t enc28j60_close(rt_device_t dev)
-{
-	return RT_EOK;
-}
-
-/* Read */
-rt_size_t enc28j60_read(rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
-{
-	rt_set_errno(-RT_ENOSYS);
-	return 0;
-}
-
-/* Write */
-rt_size_t enc28j60_write(rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
-{
-	rt_set_errno(-RT_ENOSYS);
-	return 0;
-}
-
-/* ethernet device interface */
-/*
- * Transmit packet.
- */
-rt_err_t enc28j60_tx( rt_device_t dev, struct pbuf* p)
-{
-	struct pbuf* q;
-	rt_uint32_t len;
-	rt_uint8_t* ptr;
-
-	// rt_kprintf("tx pbuf: 0x%08x\n", p);
-
-	/* lock tx operation */
-	rt_sem_take(&tx_sem, RT_WAITING_FOREVER);
-
-	// Set the write pointer to start of transmit buffer area
-	spi_write(EWRPTL, TXSTART_INIT&0xFF);
-	spi_write(EWRPTH, TXSTART_INIT>>8);
-	// Set the TXND pointer to correspond to the packet size given
-	spi_write(ETXNDL, (TXSTART_INIT+ p->tot_len + 1)&0xFF);
-	spi_write(ETXNDH, (TXSTART_INIT+ p->tot_len + 1)>>8);
-
-	// write per-packet control byte (0x00 means use macon3 settings)
-	spi_write_op(ENC28J60_WRITE_BUF_MEM, 0, 0x00);
-
-	for (q = p; q != NULL; q = q->next)
-	{
-        CSACTIVE;
-
-		SPI_I2S_SendData(SPI2, ENC28J60_WRITE_BUF_MEM);
-		while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-
-		len = q->len;
-		ptr = q->payload;
-        while(len)
-        {
-			SPI_I2S_SendData(SPI2,*ptr) ;
-			while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);;
-				ptr++;
-
-			len--;
-        }
-
-        CSPASSIVE;
-	}
-
-	// send the contents of the transmit buffer onto the network
-	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_TXRTS);
-	// Reset the transmit logic problem. See Rev. B4 Silicon Errata point 12.
-	if( (spi_read(EIR) & EIR_TXERIF) )
-	{
-		spi_write_op(ENC28J60_BIT_FIELD_CLR, ECON1, ECON1_TXRTS);
-	}
-
-	// rt_kprintf("tx ok\n");
-
-    return RT_EOK;
-}
-
-struct pbuf *enc28j60_rx(rt_device_t dev)
-{
-	struct pbuf* p;
-	rt_uint32_t len;
-	rt_uint16_t rxstat;
-	rt_uint32_t pk_counter;
-
-    p = RT_NULL;
-
-    pk_counter = spi_read(EPKTCNT);
-    if (pk_counter)
-    {
-        // Set the read pointer to the start of the received packet
-        spi_write(ERDPTL, (NextPacketPtr));
-        spi_write(ERDPTH, (NextPacketPtr)>>8);
-
-        // read the next packet pointer
-        NextPacketPtr  = spi_read_op(ENC28J60_READ_BUF_MEM, 0);
-        NextPacketPtr |= spi_read_op(ENC28J60_READ_BUF_MEM, 0)<<8;
-
-        // read the packet length (see datasheet page 43)
-        len  = spi_read_op(ENC28J60_READ_BUF_MEM, 0);	    //0x54
-        len |= spi_read_op(ENC28J60_READ_BUF_MEM, 0) <<8;	//5554
-
-        len-=4; //remove the CRC count
-
-        // read the receive status (see datasheet page 43)
-        rxstat  = spi_read_op(ENC28J60_READ_BUF_MEM, 0);
-        rxstat |= ((rt_uint16_t)spi_read_op(ENC28J60_READ_BUF_MEM, 0))<<8;
-
-        // check CRC and symbol errors (see datasheet page 44, table 7-3):
-        // The ERXFCON.CRCEN is set by default. Normally we should not
-        // need to check this.
-        if ((rxstat & 0x80)==0)
-        {
-            // invalid
-            len=0;
-        }
-        else
-        {
-            /* allocation pbuf */
-            p = pbuf_alloc(PBUF_LINK, len, PBUF_RAM);
-            if (p != RT_NULL)
-            {
-                rt_uint8_t* data;
-                struct pbuf* q;
-
-                for (q = p; q != RT_NULL; q= q->next)
-                {
-                    data = q->payload;
-                    len = q->len;
-
-                    CSACTIVE;
-
-                    SPI_I2S_SendData(SPI2,ENC28J60_READ_BUF_MEM);
-                    while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-
-                    SPI_I2S_ReceiveData(SPI2);
-
-                    while(len)
-                    {
-                        len--;
-                        SPI_I2S_SendData(SPI2,0x00)	;
-                        while(SPI_I2S_GetFlagStatus(SPI2, SPI_I2S_FLAG_BSY)==SET);
-
-                        *data= SPI_I2S_ReceiveData(SPI2);
-                        data++;
-                    }
-
-                    CSPASSIVE;
-                }
-            }
-        }
-
-        // Move the RX read pointer to the start of the next received packet
-        // This frees the memory we just read out
-        spi_write(ERXRDPTL, (NextPacketPtr));
-        spi_write(ERXRDPTH, (NextPacketPtr)>>8);
-
-        // decrement the packet counter indicate we are done with this packet
-        spi_write_op(ENC28J60_BIT_FIELD_SET, ECON2, ECON2_PKTDEC);
-    }
-	else
-	{
-		rt_uint32_t level;
-		/* lock enc28j60 */
-		level = rt_hw_interrupt_disable();
-		
-		// switch to bank 0
-		enc28j60_set_bank(EIE);
-		// enable interrutps
-		spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_PKTIE);
-		// switch to bank 0
-		enc28j60_set_bank(ECON1);
-		// enable packet reception
-		spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN);
-		
-		/* enable interrupt */
-		rt_hw_interrupt_enable(level);
-	}
-
-    return p;
-}
-
-static void RCC_Configuration(void)
-{
-    /* enable spi2 clock */
-    RCC_APB1PeriphClockCmd(RCC_APB1Periph_SPI2, ENABLE);
-
-    /* enable gpiob port clock */
-    RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOB | RCC_APB2Periph_AFIO, ENABLE);
-}
-
-static void NVIC_Configuration(void)
-{
-    NVIC_InitTypeDef NVIC_InitStructure;
-
-    /* Configure one bit for preemption priority */
-    NVIC_PriorityGroupConfig(NVIC_PriorityGroup_1);
-
-    /* Enable the EXTI0 Interrupt */
-    NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel;
-    NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0;
-    NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0;
-    NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE;
-    NVIC_Init(&NVIC_InitStructure);
-}
-
-static void GPIO_Configuration()
-{
-	GPIO_InitTypeDef GPIO_InitStructure;
-    EXTI_InitTypeDef EXTI_InitStructure;
-
-	/* configure PB0 as external interrupt */
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0;
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING;
-	GPIO_Init(GPIOB, &GPIO_InitStructure);
-
-    /* Configure SPI2 pins:  SCK, MISO and MOSI ----------------------------*/
-    GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13 | GPIO_Pin_14 | GPIO_Pin_15;
-    GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
-    GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
-    GPIO_Init(GPIOB, &GPIO_InitStructure);
-
-	GPIO_InitStructure.GPIO_Pin = GPIO_Pin_12;
-	GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
-	GPIO_Init(GPIOB, &GPIO_InitStructure);
-
-    /* Connect ENC28J60 EXTI Line to GPIOB Pin 0 */
-    GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0);
-
-    /* Configure ENC28J60 EXTI Line to generate an interrupt on falling edge */
-    EXTI_InitStructure.EXTI_Line = EXTI_Line0;
-    EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt;
-    EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Falling;
-    EXTI_InitStructure.EXTI_LineCmd = ENABLE;
-    EXTI_Init(&EXTI_InitStructure);
-
-	/* Clear the Key Button EXTI line pending bit */
-	EXTI_ClearITPendingBit(EXTI_Line0);
-}
-
-static void SetupSPI (void)
-{
-    SPI_InitTypeDef SPI_InitStructure;
-    SPI_InitStructure.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
-    SPI_InitStructure.SPI_Mode = SPI_Mode_Master;
-    SPI_InitStructure.SPI_DataSize = SPI_DataSize_8b;
-    SPI_InitStructure.SPI_CPOL = SPI_CPOL_Low;
-    SPI_InitStructure.SPI_CPHA = SPI_CPHA_1Edge;
-    SPI_InitStructure.SPI_NSS = SPI_NSS_Soft;
-    SPI_InitStructure.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
-    SPI_InitStructure.SPI_FirstBit = SPI_FirstBit_MSB;
-    SPI_InitStructure.SPI_CRCPolynomial = 7;
-    SPI_Init(SPI2, &SPI_InitStructure);
-    SPI_Cmd(SPI2, ENABLE);
-}
-
-static rt_timer_t enc28j60_timer;
-void rt_hw_enc28j60_timeout(void* parameter)
-{
-	// switch to bank 0
-	enc28j60_set_bank(EIE);
-	// enable interrutps
-	spi_write_op(ENC28J60_BIT_FIELD_SET, EIE, EIE_PKTIE);
-	// switch to bank 0
-	enc28j60_set_bank(ECON1);
-	// enable packet reception
-	spi_write_op(ENC28J60_BIT_FIELD_SET, ECON1, ECON1_RXEN);
-
-	enc28j60_isr();
-}
-
-int rt_hw_enc28j60_init()
-{
-	rt_err_t result;
-
-	/* configuration PB5 as INT */
-	RCC_Configuration();
-	NVIC_Configuration();
-	GPIO_Configuration();
-	SetupSPI();
-
-	/* init rt-thread device interface */
-	enc28j60_dev_entry.parent.parent.init		= enc28j60_init;
-	enc28j60_dev_entry.parent.parent.open		= enc28j60_open;
-	enc28j60_dev_entry.parent.parent.close		= enc28j60_close;
-	enc28j60_dev_entry.parent.parent.read		= enc28j60_read;
-	enc28j60_dev_entry.parent.parent.write		= enc28j60_write;
-	enc28j60_dev_entry.parent.parent.control	= enc28j60_control;
-	enc28j60_dev_entry.parent.eth_rx			= enc28j60_rx;
-	enc28j60_dev_entry.parent.eth_tx			= enc28j60_tx;
-
-	/* Update MAC address */
-	enc28j60_dev_entry.dev_addr[0] = 0x1e;
-	enc28j60_dev_entry.dev_addr[1] = 0x30;
-	enc28j60_dev_entry.dev_addr[2] = 0x6c;
-	enc28j60_dev_entry.dev_addr[3] = 0xa2;
-	enc28j60_dev_entry.dev_addr[4] = 0x45;
-	enc28j60_dev_entry.dev_addr[5] = 0x5e;
-
-	rt_sem_init(&tx_sem, "emac", 1, RT_IPC_FLAG_FIFO);
-
-	result = eth_device_init(&(enc28j60_dev->parent), "E0");
-
-	/* workaround for enc28j60 interrupt */
-	enc28j60_timer = rt_timer_create("etimer", 
-		rt_hw_enc28j60_timeout, RT_NULL, 
-		50, RT_TIMER_FLAG_PERIODIC);
-	if (enc28j60_timer != RT_NULL)
-		rt_timer_start(enc28j60_timer);
-
-	return RT_EOK;
-}

bsp/stmsky001/enc28j60.h

@@ -1,256 +0,0 @@
-#ifndef __ENC28J60_H__
-#define __ENC28J60_H__
-
-#include <rtthread.h>
-
-// ENC28J60 Control Registers
-// Control register definitions are a combination of address,
-// bank number, and Ethernet/MAC/PHY indicator bits.
-// - Register address        (bits 0-4)
-// - Bank number        (bits 5-6)
-// - MAC/PHY indicator        (bit 7)
-#define ADDR_MASK        0x1F
-#define BANK_MASK        0x60
-#define SPRD_MASK        0x80
-// All-bank registers
-#define EIE              0x1B
-#define EIR              0x1C
-#define ESTAT            0x1D
-#define ECON2            0x1E
-#define ECON1            0x1F
-// Bank 0 registers
-#define ERDPTL           (0x00|0x00)
-#define ERDPTH           (0x01|0x00)
-#define EWRPTL           (0x02|0x00)
-#define EWRPTH           (0x03|0x00)
-#define ETXSTL           (0x04|0x00)
-#define ETXSTH           (0x05|0x00)
-#define ETXNDL           (0x06|0x00)
-#define ETXNDH           (0x07|0x00)
-#define ERXSTL           (0x08|0x00)
-#define ERXSTH           (0x09|0x00)
-#define ERXNDL           (0x0A|0x00)
-#define ERXNDH           (0x0B|0x00)
-#define ERXRDPTL         (0x0C|0x00)
-#define ERXRDPTH         (0x0D|0x00)
-#define ERXWRPTL         (0x0E|0x00)
-#define ERXWRPTH         (0x0F|0x00)
-#define EDMASTL          (0x10|0x00)
-#define EDMASTH          (0x11|0x00)
-#define EDMANDL          (0x12|0x00)
-#define EDMANDH          (0x13|0x00)
-#define EDMADSTL         (0x14|0x00)
-#define EDMADSTH         (0x15|0x00)
-#define EDMACSL          (0x16|0x00)
-#define EDMACSH          (0x17|0x00)
-// Bank 1 registers
-#define EHT0             (0x00|0x20)
-#define EHT1             (0x01|0x20)
-#define EHT2             (0x02|0x20)
-#define EHT3             (0x03|0x20)
-#define EHT4             (0x04|0x20)
-#define EHT5             (0x05|0x20)
-#define EHT6             (0x06|0x20)
-#define EHT7             (0x07|0x20)
-#define EPMM0            (0x08|0x20)
-#define EPMM1            (0x09|0x20)
-#define EPMM2            (0x0A|0x20)
-#define EPMM3            (0x0B|0x20)
-#define EPMM4            (0x0C|0x20)
-#define EPMM5            (0x0D|0x20)
-#define EPMM6            (0x0E|0x20)
-#define EPMM7            (0x0F|0x20)
-#define EPMCSL           (0x10|0x20)
-#define EPMCSH           (0x11|0x20)
-#define EPMOL            (0x14|0x20)
-#define EPMOH            (0x15|0x20)
-#define EWOLIE           (0x16|0x20)
-#define EWOLIR           (0x17|0x20)
-#define ERXFCON          (0x18|0x20)
-#define EPKTCNT          (0x19|0x20)
-// Bank 2 registers
-#define MACON1           (0x00|0x40|0x80)
-#define MACON2           (0x01|0x40|0x80)
-#define MACON3           (0x02|0x40|0x80)
-#define MACON4           (0x03|0x40|0x80)
-#define MABBIPG          (0x04|0x40|0x80)
-#define MAIPGL           (0x06|0x40|0x80)
-#define MAIPGH           (0x07|0x40|0x80)
-#define MACLCON1         (0x08|0x40|0x80)
-#define MACLCON2         (0x09|0x40|0x80)
-#define MAMXFLL          (0x0A|0x40|0x80)
-#define MAMXFLH          (0x0B|0x40|0x80)
-#define MAPHSUP          (0x0D|0x40|0x80)
-#define MICON            (0x11|0x40|0x80)
-#define MICMD            (0x12|0x40|0x80)
-#define MIREGADR         (0x14|0x40|0x80)
-#define MIWRL            (0x16|0x40|0x80)
-#define MIWRH            (0x17|0x40|0x80)
-#define MIRDL            (0x18|0x40|0x80)
-#define MIRDH            (0x19|0x40|0x80)
-// Bank 3 registers
-#define MAADR1           (0x00|0x60|0x80)
-#define MAADR0           (0x01|0x60|0x80)
-#define MAADR3           (0x02|0x60|0x80)
-#define MAADR2           (0x03|0x60|0x80)
-#define MAADR5           (0x04|0x60|0x80)
-#define MAADR4           (0x05|0x60|0x80)
-#define EBSTSD           (0x06|0x60)
-#define EBSTCON          (0x07|0x60)
-#define EBSTCSL          (0x08|0x60)
-#define EBSTCSH          (0x09|0x60)
-#define MISTAT           (0x0A|0x60|0x80)
-#define EREVID           (0x12|0x60)
-#define ECOCON           (0x15|0x60)
-#define EFLOCON          (0x17|0x60)
-#define EPAUSL           (0x18|0x60)
-#define EPAUSH           (0x19|0x60)
-// PHY registers
-#define PHCON1           0x00
-#define PHSTAT1          0x01
-#define PHHID1           0x02
-#define PHHID2           0x03
-#define PHCON2           0x10
-#define PHSTAT2          0x11
-#define PHIE             0x12
-#define PHIR             0x13
-#define PHLCON           0x14
-
-// ENC28J60 ERXFCON Register Bit Definitions
-#define ERXFCON_UCEN     0x80
-#define ERXFCON_ANDOR    0x40
-#define ERXFCON_CRCEN    0x20
-#define ERXFCON_PMEN     0x10
-#define ERXFCON_MPEN     0x08
-#define ERXFCON_HTEN     0x04
-#define ERXFCON_MCEN     0x02
-#define ERXFCON_BCEN     0x01
-// ENC28J60 EIE Register Bit Definitions
-#define EIE_INTIE        0x80
-#define EIE_PKTIE        0x40
-#define EIE_DMAIE        0x20
-#define EIE_LINKIE       0x10
-#define EIE_TXIE         0x08
-#define EIE_WOLIE        0x04
-#define EIE_TXERIE       0x02
-#define EIE_RXERIE       0x01
-// ENC28J60 EIR Register Bit Definitions
-#define EIR_PKTIF        0x40
-#define EIR_DMAIF        0x20
-#define EIR_LINKIF       0x10
-#define EIR_TXIF         0x08
-#define EIR_WOLIF        0x04
-#define EIR_TXERIF       0x02
-#define EIR_RXERIF       0x01
-// ENC28J60 ESTAT Register Bit Definitions
-#define ESTAT_INT        0x80
-#define ESTAT_LATECOL    0x10
-#define ESTAT_RXBUSY     0x04
-#define ESTAT_TXABRT     0x02
-#define ESTAT_CLKRDY     0x01
-// ENC28J60 ECON2 Register Bit Definitions
-#define ECON2_AUTOINC    0x80
-#define ECON2_PKTDEC     0x40
-#define ECON2_PWRSV      0x20
-#define ECON2_VRPS       0x08
-// ENC28J60 ECON1 Register Bit Definitions
-#define ECON1_TXRST      0x80
-#define ECON1_RXRST      0x40
-#define ECON1_DMAST      0x20
-#define ECON1_CSUMEN     0x10
-#define ECON1_TXRTS      0x08
-#define ECON1_RXEN       0x04
-#define ECON1_BSEL1      0x02
-#define ECON1_BSEL0      0x01
-// ENC28J60 MACON1 Register Bit Definitions
-#define MACON1_LOOPBK    0x10
-#define MACON1_TXPAUS    0x08
-#define MACON1_RXPAUS    0x04
-#define MACON1_PASSALL   0x02
-#define MACON1_MARXEN    0x01
-// ENC28J60 MACON2 Register Bit Definitions
-#define MACON2_MARST     0x80
-#define MACON2_RNDRST    0x40
-#define MACON2_MARXRST   0x08
-#define MACON2_RFUNRST   0x04
-#define MACON2_MATXRST   0x02
-#define MACON2_TFUNRST   0x01
-// ENC28J60 MACON3 Register Bit Definitions
-#define MACON3_PADCFG2   0x80
-#define MACON3_PADCFG1   0x40
-#define MACON3_PADCFG0   0x20
-#define MACON3_TXCRCEN   0x10
-#define MACON3_PHDRLEN   0x08
-#define MACON3_HFRMLEN   0x04
-#define MACON3_FRMLNEN   0x02
-#define MACON3_FULDPX    0x01
-// ENC28J60 MACON4 Register Bit Definitions
-#define	MACON4_DEFER	(1<<6)
-#define	MACON4_BPEN		(1<<5)
-#define	MACON4_NOBKOFF	(1<<4)
-// ENC28J60 MICMD Register Bit Definitions
-#define MICMD_MIISCAN    0x02
-#define MICMD_MIIRD      0x01
-// ENC28J60 MISTAT Register Bit Definitions
-#define MISTAT_NVALID    0x04
-#define MISTAT_SCAN      0x02
-#define MISTAT_BUSY      0x01
-// ENC28J60 PHY PHCON1 Register Bit Definitions
-#define PHCON1_PRST      0x8000
-#define PHCON1_PLOOPBK   0x4000
-#define PHCON1_PPWRSV    0x0800
-#define PHCON1_PDPXMD    0x0100
-// ENC28J60 PHY PHSTAT1 Register Bit Definitions
-#define PHSTAT1_PFDPX    0x1000
-#define PHSTAT1_PHDPX    0x0800
-#define PHSTAT1_LLSTAT   0x0004
-#define PHSTAT1_JBSTAT   0x0002
-/* ENC28J60 PHY PHSTAT2 Register Bit Definitions */
-#define PHSTAT2_TXSTAT	(1 << 13)
-#define PHSTAT2_RXSTAT	(1 << 12)
-#define PHSTAT2_COLSTAT	(1 << 11)
-#define PHSTAT2_LSTAT	(1 << 10)
-#define PHSTAT2_DPXSTAT	(1 << 9)
-#define PHSTAT2_PLRITY	(1 << 5)
-// ENC28J60 PHY PHCON2 Register Bit Definitions
-#define PHCON2_FRCLINK   0x4000
-#define PHCON2_TXDIS     0x2000
-#define PHCON2_JABBER    0x0400
-#define PHCON2_HDLDIS    0x0100
-
-// ENC28J60 Packet Control Byte Bit Definitions
-#define PKTCTRL_PHUGEEN  0x08
-#define PKTCTRL_PPADEN   0x04
-#define PKTCTRL_PCRCEN   0x02
-#define PKTCTRL_POVERRIDE 0x01
-
-// SPI operation codes
-#define ENC28J60_READ_CTRL_REG       0x00
-#define ENC28J60_READ_BUF_MEM        0x3A
-#define ENC28J60_WRITE_CTRL_REG      0x40
-#define ENC28J60_WRITE_BUF_MEM       0x7A
-#define ENC28J60_BIT_FIELD_SET       0x80
-#define ENC28J60_BIT_FIELD_CLR       0xA0
-#define ENC28J60_SOFT_RESET          0xFF
-
-// The RXSTART_INIT should be zero. See Rev. B4 Silicon Errata
-// buffer boundaries applied to internal 8K ram
-// the entire available packet buffer space is allocated
-//
-
-// start with recbuf at 0/
-#define RXSTART_INIT	0x0
-// receive buffer end
-#define RXSTOP_INIT		(0x1FFF-0x0600) - 1
-// start TX buffer at 0x1FFF-0x0600, pace for one full ethernet frame (~1500 bytes)
-
-#define TXSTART_INIT	(0x1FFF-0x0600)
-// stp TX buffer at end of mem
-#define TXSTOP_INIT		0x1FFF
-
-// max frame length which the conroller will accept:
-#define MAX_FRAMELEN	1518
-
-int rt_hw_enc28j60_init(void);
-
-#endif

bsp/stmsky001/library/inc/cortexm3_macro.h

@@ -1,53 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : cortexm3_macro.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : Header file for cortexm3_macro.s.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __CORTEXM3_MACRO_H
-#define __CORTEXM3_MACRO_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_type.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void __WFI(void);
-void __WFE(void);
-void __SEV(void);
-void __ISB(void);
-void __DSB(void);
-void __DMB(void);
-void __SVC(void);
-u32 __MRS_CONTROL(void);
-void __MSR_CONTROL(u32 Control);
-u32 __MRS_PSP(void);
-void __MSR_PSP(u32 TopOfProcessStack);
-u32 __MRS_MSP(void);
-void __MSR_MSP(u32 TopOfMainStack);
-void __RESETPRIMASK(void);
-void __SETPRIMASK(void);
-u32 __READ_PRIMASK(void);
-void __RESETFAULTMASK(void);
-void __SETFAULTMASK(void);
-u32 __READ_FAULTMASK(void);
-void __BASEPRICONFIG(u32 NewPriority);
-u32 __GetBASEPRI(void);
-u16 __REV_HalfWord(u16 Data);
-u32 __REV_Word(u32 Data);
-
-#endif /* __CORTEXM3_MACRO_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_adc.h

@@ -1,300 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_adc.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      ADC firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_ADC_H
-#define __STM32F10x_ADC_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* ADC Init structure definition */
-typedef struct
-{
-  u32 ADC_Mode;
-  FunctionalState ADC_ScanConvMode; 
-  FunctionalState ADC_ContinuousConvMode;
-  u32 ADC_ExternalTrigConv;
-  u32 ADC_DataAlign;
-  u8 ADC_NbrOfChannel;
-}ADC_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-#define IS_ADC_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == ADC1_BASE) || \
-                                   ((*(u32*)&(PERIPH)) == ADC2_BASE) || \
-                                   ((*(u32*)&(PERIPH)) == ADC3_BASE))
-                                 
-#define IS_ADC_DMA_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == ADC1_BASE) || \
-                                   ((*(u32*)&(PERIPH)) == ADC3_BASE))
-
-/* ADC dual mode -------------------------------------------------------------*/
-#define ADC_Mode_Independent                       ((u32)0x00000000)
-#define ADC_Mode_RegInjecSimult                    ((u32)0x00010000)
-#define ADC_Mode_RegSimult_AlterTrig               ((u32)0x00020000)
-#define ADC_Mode_InjecSimult_FastInterl            ((u32)0x00030000)
-#define ADC_Mode_InjecSimult_SlowInterl            ((u32)0x00040000)
-#define ADC_Mode_InjecSimult                       ((u32)0x00050000)
-#define ADC_Mode_RegSimult                         ((u32)0x00060000)
-#define ADC_Mode_FastInterl                        ((u32)0x00070000)
-#define ADC_Mode_SlowInterl                        ((u32)0x00080000)
-#define ADC_Mode_AlterTrig                         ((u32)0x00090000)
-
-#define IS_ADC_MODE(MODE) (((MODE) == ADC_Mode_Independent) || \
-                           ((MODE) == ADC_Mode_RegInjecSimult) || \
-                           ((MODE) == ADC_Mode_RegSimult_AlterTrig) || \
-                           ((MODE) == ADC_Mode_InjecSimult_FastInterl) || \
-                           ((MODE) == ADC_Mode_InjecSimult_SlowInterl) || \
-                           ((MODE) == ADC_Mode_InjecSimult) || \
-                           ((MODE) == ADC_Mode_RegSimult) || \
-                           ((MODE) == ADC_Mode_FastInterl) || \
-                           ((MODE) == ADC_Mode_SlowInterl) || \
-                           ((MODE) == ADC_Mode_AlterTrig))
-
-/* ADC extrenal trigger sources for regular channels conversion --------------*/
-/* for ADC1 and ADC2 */
-#define ADC_ExternalTrigConv_T1_CC1                ((u32)0x00000000)
-#define ADC_ExternalTrigConv_T1_CC2                ((u32)0x00020000)
-#define ADC_ExternalTrigConv_T2_CC2                ((u32)0x00060000)
-#define ADC_ExternalTrigConv_T3_TRGO               ((u32)0x00080000)
-#define ADC_ExternalTrigConv_T4_CC4                ((u32)0x000A0000)
-#define ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO    ((u32)0x000C0000)
-/* for ADC1, ADC2 and ADC3 */
-#define ADC_ExternalTrigConv_T1_CC3                ((u32)0x00040000)
-#define ADC_ExternalTrigConv_None                  ((u32)0x000E0000)
-/* for ADC3 */
-#define ADC_ExternalTrigConv_T3_CC1                ((u32)0x00000000)
-#define ADC_ExternalTrigConv_T2_CC3                ((u32)0x00020000)
-#define ADC_ExternalTrigConv_T8_CC1                ((u32)0x00060000)
-#define ADC_ExternalTrigConv_T8_TRGO               ((u32)0x00080000)
-#define ADC_ExternalTrigConv_T5_CC1                ((u32)0x000A0000)
-#define ADC_ExternalTrigConv_T5_CC3                ((u32)0x000C0000)
-
-#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_ExternalTrigConv_T1_CC1) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T1_CC2) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T1_CC3) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T2_CC2) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T3_TRGO) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T4_CC4) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_Ext_IT11_TIM8_TRGO) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_None) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T3_CC1) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T2_CC3) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T8_CC1) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T8_TRGO) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T5_CC1) || \
-                                  ((REGTRIG) == ADC_ExternalTrigConv_T5_CC3))
-
-/* ADC data align ------------------------------------------------------------*/
-#define ADC_DataAlign_Right                        ((u32)0x00000000)
-#define ADC_DataAlign_Left                         ((u32)0x00000800)
-
-#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DataAlign_Right) || \
-                                  ((ALIGN) == ADC_DataAlign_Left))
-
-/* ADC channels --------------------------------------------------------------*/
-#define ADC_Channel_0                               ((u8)0x00)
-#define ADC_Channel_1                               ((u8)0x01)
-#define ADC_Channel_2                               ((u8)0x02)
-#define ADC_Channel_3                               ((u8)0x03)
-#define ADC_Channel_4                               ((u8)0x04)
-#define ADC_Channel_5                               ((u8)0x05)
-#define ADC_Channel_6                               ((u8)0x06)
-#define ADC_Channel_7                               ((u8)0x07)
-#define ADC_Channel_8                               ((u8)0x08)
-#define ADC_Channel_9                               ((u8)0x09)
-#define ADC_Channel_10                              ((u8)0x0A)
-#define ADC_Channel_11                              ((u8)0x0B)
-#define ADC_Channel_12                              ((u8)0x0C)
-#define ADC_Channel_13                              ((u8)0x0D)
-#define ADC_Channel_14                              ((u8)0x0E)
-#define ADC_Channel_15                              ((u8)0x0F)
-#define ADC_Channel_16                              ((u8)0x10)
-#define ADC_Channel_17                              ((u8)0x11)
-
-#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) == ADC_Channel_0) || ((CHANNEL) == ADC_Channel_1) || \
-                                 ((CHANNEL) == ADC_Channel_2) || ((CHANNEL) == ADC_Channel_3) || \
-                                 ((CHANNEL) == ADC_Channel_4) || ((CHANNEL) == ADC_Channel_5) || \
-                                 ((CHANNEL) == ADC_Channel_6) || ((CHANNEL) == ADC_Channel_7) || \
-                                 ((CHANNEL) == ADC_Channel_8) || ((CHANNEL) == ADC_Channel_9) || \
-                                 ((CHANNEL) == ADC_Channel_10) || ((CHANNEL) == ADC_Channel_11) || \
-                                 ((CHANNEL) == ADC_Channel_12) || ((CHANNEL) == ADC_Channel_13) || \
-                                 ((CHANNEL) == ADC_Channel_14) || ((CHANNEL) == ADC_Channel_15) || \
-                                 ((CHANNEL) == ADC_Channel_16) || ((CHANNEL) == ADC_Channel_17))
-
-/* ADC sampling times --------------------------------------------------------*/
-#define ADC_SampleTime_1Cycles5                    ((u8)0x00)
-#define ADC_SampleTime_7Cycles5                    ((u8)0x01)
-#define ADC_SampleTime_13Cycles5                   ((u8)0x02)
-#define ADC_SampleTime_28Cycles5                   ((u8)0x03)
-#define ADC_SampleTime_41Cycles5                   ((u8)0x04)
-#define ADC_SampleTime_55Cycles5                   ((u8)0x05)
-#define ADC_SampleTime_71Cycles5                   ((u8)0x06)
-#define ADC_SampleTime_239Cycles5                  ((u8)0x07)
-
-#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SampleTime_1Cycles5) || \
-                                  ((TIME) == ADC_SampleTime_7Cycles5) || \
-                                  ((TIME) == ADC_SampleTime_13Cycles5) || \
-                                  ((TIME) == ADC_SampleTime_28Cycles5) || \
-                                  ((TIME) == ADC_SampleTime_41Cycles5) || \
-                                  ((TIME) == ADC_SampleTime_55Cycles5) || \
-                                  ((TIME) == ADC_SampleTime_71Cycles5) || \
-                                  ((TIME) == ADC_SampleTime_239Cycles5))
-
-/* ADC extrenal trigger sources for injected channels conversion -------------*/
-/* For ADC1 and ADC2 */
-#define ADC_ExternalTrigInjecConv_T2_TRGO           ((u32)0x00002000)
-#define ADC_ExternalTrigInjecConv_T2_CC1            ((u32)0x00003000)
-#define ADC_ExternalTrigInjecConv_T3_CC4            ((u32)0x00004000)
-#define ADC_ExternalTrigInjecConv_T4_TRGO           ((u32)0x00005000)
-#define ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4 ((u32)0x00006000)
-/* For ADC1, ADC2 and ADC3 */
-#define ADC_ExternalTrigInjecConv_T1_TRGO           ((u32)0x00000000)
-#define ADC_ExternalTrigInjecConv_T1_CC4            ((u32)0x00001000)
-#define ADC_ExternalTrigInjecConv_None              ((u32)0x00007000)
-/* For ADC3 */
-#define ADC_ExternalTrigInjecConv_T4_CC3            ((u32)0x00002000)
-#define ADC_ExternalTrigInjecConv_T8_CC2            ((u32)0x00003000)
-#define ADC_ExternalTrigInjecConv_T8_CC4            ((u32)0x00004000)
-#define ADC_ExternalTrigInjecConv_T5_TRGO           ((u32)0x00005000)
-#define ADC_ExternalTrigInjecConv_T5_CC4            ((u32)0x00006000)
-
-#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_ExternalTrigInjecConv_T1_TRGO) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T1_CC4) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_TRGO) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T2_CC1) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T3_CC4) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_TRGO) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_Ext_IT15_TIM8_CC4) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_None) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T4_CC3) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC2) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T8_CC4) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_TRGO) || \
-                                        ((INJTRIG) == ADC_ExternalTrigInjecConv_T5_CC4))
-
-/* ADC injected channel selection --------------------------------------------*/
-#define ADC_InjectedChannel_1                       ((u8)0x14)
-#define ADC_InjectedChannel_2                       ((u8)0x18)
-#define ADC_InjectedChannel_3                       ((u8)0x1C)
-#define ADC_InjectedChannel_4                       ((u8)0x20)
-
-#define IS_ADC_INJECTED_CHANNEL(CHANNEL) (((CHANNEL) == ADC_InjectedChannel_1) || \
-                                          ((CHANNEL) == ADC_InjectedChannel_2) || \
-                                          ((CHANNEL) == ADC_InjectedChannel_3) || \
-                                          ((CHANNEL) == ADC_InjectedChannel_4))
-
-/* ADC analog watchdog selection ---------------------------------------------*/
-#define ADC_AnalogWatchdog_SingleRegEnable         ((u32)0x00800200)
-#define ADC_AnalogWatchdog_SingleInjecEnable       ((u32)0x00400200)
-#define ADC_AnalogWatchdog_SingleRegOrInjecEnable  ((u32)0x00C00200)
-#define ADC_AnalogWatchdog_AllRegEnable            ((u32)0x00800000)
-#define ADC_AnalogWatchdog_AllInjecEnable          ((u32)0x00400000)
-#define ADC_AnalogWatchdog_AllRegAllInjecEnable    ((u32)0x00C00000)
-#define ADC_AnalogWatchdog_None                    ((u32)0x00000000)
-
-#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_AnalogWatchdog_SingleRegEnable) || \
-                                          ((WATCHDOG) == ADC_AnalogWatchdog_SingleInjecEnable) || \
-                                          ((WATCHDOG) == ADC_AnalogWatchdog_SingleRegOrInjecEnable) || \
-                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllRegEnable) || \
-                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllInjecEnable) || \
-                                          ((WATCHDOG) == ADC_AnalogWatchdog_AllRegAllInjecEnable) || \
-                                          ((WATCHDOG) == ADC_AnalogWatchdog_None))
-
-/* ADC interrupts definition -------------------------------------------------*/
-#define ADC_IT_EOC                                 ((u16)0x0220)
-#define ADC_IT_AWD                                 ((u16)0x0140)
-#define ADC_IT_JEOC                                ((u16)0x0480)
-
-#define IS_ADC_IT(IT) ((((IT) & (u16)0xF81F) == 0x00) && ((IT) != 0x00))
-#define IS_ADC_GET_IT(IT) (((IT) == ADC_IT_EOC) || ((IT) == ADC_IT_AWD) || \
-                           ((IT) == ADC_IT_JEOC))
-
-/* ADC flags definition ------------------------------------------------------*/
-#define ADC_FLAG_AWD                               ((u8)0x01)
-#define ADC_FLAG_EOC                               ((u8)0x02)
-#define ADC_FLAG_JEOC                              ((u8)0x04)
-#define ADC_FLAG_JSTRT                             ((u8)0x08)
-#define ADC_FLAG_STRT                              ((u8)0x10)
-
-#define IS_ADC_CLEAR_FLAG(FLAG) ((((FLAG) & (u8)0xE0) == 0x00) && ((FLAG) != 0x00))
-#define IS_ADC_GET_FLAG(FLAG) (((FLAG) == ADC_FLAG_AWD) || ((FLAG) == ADC_FLAG_EOC) || \
-                               ((FLAG) == ADC_FLAG_JEOC) || ((FLAG)== ADC_FLAG_JSTRT) || \
-                               ((FLAG) == ADC_FLAG_STRT))
-
-/* ADC thresholds ------------------------------------------------------------*/
-#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= 0xFFF)
-
-/* ADC injected offset -------------------------------------------------------*/
-#define IS_ADC_OFFSET(OFFSET) ((OFFSET) <= 0xFFF)
-
-/* ADC injected length -------------------------------------------------------*/
-#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x4))
-
-/* ADC injected rank ---------------------------------------------------------*/
-#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x4))
-
-/* ADC regular length --------------------------------------------------------*/
-#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= 0x1) && ((LENGTH) <= 0x10))
-
-/* ADC regular rank ----------------------------------------------------------*/
-#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= 0x1) && ((RANK) <= 0x10))
-
-/* ADC regular discontinuous mode number -------------------------------------*/
-#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= 0x1) && ((NUMBER) <= 0x8))
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void ADC_DeInit(ADC_TypeDef* ADCx);
-void ADC_Init(ADC_TypeDef* ADCx, ADC_InitTypeDef* ADC_InitStruct);
-void ADC_StructInit(ADC_InitTypeDef* ADC_InitStruct);
-void ADC_Cmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-void ADC_DMACmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-void ADC_ITConfig(ADC_TypeDef* ADCx, u16 ADC_IT, FunctionalState NewState);
-void ADC_ResetCalibration(ADC_TypeDef* ADCx);
-FlagStatus ADC_GetResetCalibrationStatus(ADC_TypeDef* ADCx);
-void ADC_StartCalibration(ADC_TypeDef* ADCx);
-FlagStatus ADC_GetCalibrationStatus(ADC_TypeDef* ADCx);
-void ADC_SoftwareStartConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-FlagStatus ADC_GetSoftwareStartConvStatus(ADC_TypeDef* ADCx);
-void ADC_DiscModeChannelCountConfig(ADC_TypeDef* ADCx, u8 Number);
-void ADC_DiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-void ADC_RegularChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime);
-void ADC_ExternalTrigConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-u16 ADC_GetConversionValue(ADC_TypeDef* ADCx);
-u32 ADC_GetDualModeConversionValue(void);
-void ADC_AutoInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-void ADC_InjectedDiscModeCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-void ADC_ExternalTrigInjectedConvConfig(ADC_TypeDef* ADCx, u32 ADC_ExternalTrigInjecConv);
-void ADC_ExternalTrigInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-void ADC_SoftwareStartInjectedConvCmd(ADC_TypeDef* ADCx, FunctionalState NewState);
-FlagStatus ADC_GetSoftwareStartInjectedConvCmdStatus(ADC_TypeDef* ADCx);
-void ADC_InjectedChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel, u8 Rank, u8 ADC_SampleTime);
-void ADC_InjectedSequencerLengthConfig(ADC_TypeDef* ADCx, u8 Length);
-void ADC_SetInjectedOffset(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel, u16 Offset);
-u16 ADC_GetInjectedConversionValue(ADC_TypeDef* ADCx, u8 ADC_InjectedChannel);
-void ADC_AnalogWatchdogCmd(ADC_TypeDef* ADCx, u32 ADC_AnalogWatchdog);
-void ADC_AnalogWatchdogThresholdsConfig(ADC_TypeDef* ADCx, u16 HighThreshold, u16 LowThreshold);
-void ADC_AnalogWatchdogSingleChannelConfig(ADC_TypeDef* ADCx, u8 ADC_Channel);
-void ADC_TempSensorVrefintCmd(FunctionalState NewState);
-FlagStatus ADC_GetFlagStatus(ADC_TypeDef* ADCx, u8 ADC_FLAG);
-void ADC_ClearFlag(ADC_TypeDef* ADCx, u8 ADC_FLAG);
-ITStatus ADC_GetITStatus(ADC_TypeDef* ADCx, u16 ADC_IT);
-void ADC_ClearITPendingBit(ADC_TypeDef* ADCx, u16 ADC_IT);
-
-#endif /*__STM32F10x_ADC_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_bkp.h

@@ -1,122 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_bkp.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      BKP firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_BKP_H
-#define __STM32F10x_BKP_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Tamper Pin active level */
-#define BKP_TamperPinLevel_High           ((u16)0x0000)
-#define BKP_TamperPinLevel_Low            ((u16)0x0001)
-
-#define IS_BKP_TAMPER_PIN_LEVEL(LEVEL) (((LEVEL) == BKP_TamperPinLevel_High) || \
-                                        ((LEVEL) == BKP_TamperPinLevel_Low))
-
-/* RTC output source to output on the Tamper pin */
-#define BKP_RTCOutputSource_None          ((u16)0x0000)
-#define BKP_RTCOutputSource_CalibClock    ((u16)0x0080)
-#define BKP_RTCOutputSource_Alarm         ((u16)0x0100)
-#define BKP_RTCOutputSource_Second        ((u16)0x0300)
-
-#define IS_BKP_RTC_OUTPUT_SOURCE(SOURCE) (((SOURCE) == BKP_RTCOutputSource_None) || \
-                                          ((SOURCE) == BKP_RTCOutputSource_CalibClock) || \
-                                          ((SOURCE) == BKP_RTCOutputSource_Alarm) || \
-                                          ((SOURCE) == BKP_RTCOutputSource_Second))
-
-/* Data Backup Register */
-#define BKP_DR1                           ((u16)0x0004)
-#define BKP_DR2                           ((u16)0x0008)
-#define BKP_DR3                           ((u16)0x000C)
-#define BKP_DR4                           ((u16)0x0010)
-#define BKP_DR5                           ((u16)0x0014)
-#define BKP_DR6                           ((u16)0x0018)
-#define BKP_DR7                           ((u16)0x001C)
-#define BKP_DR8                           ((u16)0x0020)
-#define BKP_DR9                           ((u16)0x0024)
-#define BKP_DR10                          ((u16)0x0028)
-#define BKP_DR11                          ((u16)0x0040)
-#define BKP_DR12                          ((u16)0x0044)
-#define BKP_DR13                          ((u16)0x0048)
-#define BKP_DR14                          ((u16)0x004C)
-#define BKP_DR15                          ((u16)0x0050)
-#define BKP_DR16                          ((u16)0x0054)
-#define BKP_DR17                          ((u16)0x0058)
-#define BKP_DR18                          ((u16)0x005C)
-#define BKP_DR19                          ((u16)0x0060)
-#define BKP_DR20                          ((u16)0x0064)
-#define BKP_DR21                          ((u16)0x0068)
-#define BKP_DR22                          ((u16)0x006C)
-#define BKP_DR23                          ((u16)0x0070)
-#define BKP_DR24                          ((u16)0x0074)
-#define BKP_DR25                          ((u16)0x0078)
-#define BKP_DR26                          ((u16)0x007C)
-#define BKP_DR27                          ((u16)0x0080)
-#define BKP_DR28                          ((u16)0x0084)
-#define BKP_DR29                          ((u16)0x0088)
-#define BKP_DR30                          ((u16)0x008C)
-#define BKP_DR31                          ((u16)0x0090)
-#define BKP_DR32                          ((u16)0x0094)
-#define BKP_DR33                          ((u16)0x0098)
-#define BKP_DR34                          ((u16)0x009C)
-#define BKP_DR35                          ((u16)0x00A0)
-#define BKP_DR36                          ((u16)0x00A4)
-#define BKP_DR37                          ((u16)0x00A8)
-#define BKP_DR38                          ((u16)0x00AC)
-#define BKP_DR39                          ((u16)0x00B0)
-#define BKP_DR40                          ((u16)0x00B4)
-#define BKP_DR41                          ((u16)0x00B8)
-#define BKP_DR42                          ((u16)0x00BC)
-
-#define IS_BKP_DR(DR) (((DR) == BKP_DR1)  || ((DR) == BKP_DR2)  || ((DR) == BKP_DR3)  || \
-                       ((DR) == BKP_DR4)  || ((DR) == BKP_DR5)  || ((DR) == BKP_DR6)  || \
-                       ((DR) == BKP_DR7)  || ((DR) == BKP_DR8)  || ((DR) == BKP_DR9)  || \
-                       ((DR) == BKP_DR10) || ((DR) == BKP_DR11) || ((DR) == BKP_DR12) || \
-                       ((DR) == BKP_DR13) || ((DR) == BKP_DR14) || ((DR) == BKP_DR15) || \
-                       ((DR) == BKP_DR16) || ((DR) == BKP_DR17) || ((DR) == BKP_DR18) || \
-                       ((DR) == BKP_DR19) || ((DR) == BKP_DR20) || ((DR) == BKP_DR21) || \
-                       ((DR) == BKP_DR22) || ((DR) == BKP_DR23) || ((DR) == BKP_DR24) || \
-                       ((DR) == BKP_DR25) || ((DR) == BKP_DR26) || ((DR) == BKP_DR27) || \
-                       ((DR) == BKP_DR28) || ((DR) == BKP_DR29) || ((DR) == BKP_DR30) || \
-                       ((DR) == BKP_DR31) || ((DR) == BKP_DR32) || ((DR) == BKP_DR33) || \
-                       ((DR) == BKP_DR34) || ((DR) == BKP_DR35) || ((DR) == BKP_DR36) || \
-                       ((DR) == BKP_DR37) || ((DR) == BKP_DR38) || ((DR) == BKP_DR39) || \
-                       ((DR) == BKP_DR40) || ((DR) == BKP_DR41) || ((DR) == BKP_DR42))
-
-#define IS_BKP_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x7F)
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void BKP_DeInit(void);
-void BKP_TamperPinLevelConfig(u16 BKP_TamperPinLevel);
-void BKP_TamperPinCmd(FunctionalState NewState);
-void BKP_ITConfig(FunctionalState NewState);
-void BKP_RTCOutputConfig(u16 BKP_RTCOutputSource);
-void BKP_SetRTCCalibrationValue(u8 CalibrationValue);
-void BKP_WriteBackupRegister(u16 BKP_DR, u16 Data);
-u16 BKP_ReadBackupRegister(u16 BKP_DR);
-FlagStatus BKP_GetFlagStatus(void);
-void BKP_ClearFlag(void);
-ITStatus BKP_GetITStatus(void);
-void BKP_ClearITPendingBit(void);
-
-#endif /* __STM32F10x_BKP_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_can.h

@@ -1,263 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_can.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      CAN firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CAN_H
-#define __STM32F10x_CAN_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* CAN init structure definition */
-typedef struct
-{
-  FunctionalState CAN_TTCM;
-  FunctionalState CAN_ABOM;
-  FunctionalState CAN_AWUM;
-  FunctionalState CAN_NART;
-  FunctionalState CAN_RFLM;
-  FunctionalState CAN_TXFP;
-  u8 CAN_Mode;
-  u8 CAN_SJW;
-  u8 CAN_BS1;
-  u8 CAN_BS2;
-  u16 CAN_Prescaler;
-} CAN_InitTypeDef;
-
-/* CAN filter init structure definition */
-typedef struct
-{
-  u8 CAN_FilterNumber;
-  u8 CAN_FilterMode;
-  u8 CAN_FilterScale;
-  u16 CAN_FilterIdHigh;
-  u16 CAN_FilterIdLow;
-  u16 CAN_FilterMaskIdHigh;
-  u16 CAN_FilterMaskIdLow;
-  u16 CAN_FilterFIFOAssignment;
-  FunctionalState CAN_FilterActivation;
-} CAN_FilterInitTypeDef;
-
-/* CAN Tx message structure definition */
-typedef struct
-{
-  u32 StdId;
-  u32 ExtId;
-  u8 IDE;
-  u8 RTR;
-  u8 DLC;
-  u8 Data[8];
-} CanTxMsg;
-
-/* CAN Rx message structure definition */
-typedef struct
-{
-  u32 StdId;
-  u32 ExtId;
-  u8 IDE;
-  u8 RTR;
-  u8 DLC;
-  u8 Data[8];
-  u8 FMI;
-} CanRxMsg;
-
-/* Exported constants --------------------------------------------------------*/
-
-/* CAN sleep constants */
-#define CANINITFAILED              ((u8)0x00) /* CAN initialization failed */
-#define CANINITOK                  ((u8)0x01) /* CAN initialization failed */
-
-/* CAN operating mode */
-#define CAN_Mode_Normal             ((u8)0x00)  /* normal mode */
-#define CAN_Mode_LoopBack           ((u8)0x01)  /* loopback mode */
-#define CAN_Mode_Silent             ((u8)0x02)  /* silent mode */
-#define CAN_Mode_Silent_LoopBack    ((u8)0x03)  /* loopback combined with silent mode */
-
-#define IS_CAN_MODE(MODE) (((MODE) == CAN_Mode_Normal) || ((MODE) == CAN_Mode_LoopBack)|| \
-                           ((MODE) == CAN_Mode_Silent) || ((MODE) == CAN_Mode_Silent_LoopBack))
-
-/* CAN synchronisation jump width */
-#define CAN_SJW_1tq                 ((u8)0x00)  /* 1 time quantum */
-#define CAN_SJW_2tq                 ((u8)0x01)  /* 2 time quantum */
-#define CAN_SJW_3tq                 ((u8)0x02)  /* 3 time quantum */
-#define CAN_SJW_4tq                 ((u8)0x03)  /* 4 time quantum */
-
-#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1tq) || ((SJW) == CAN_SJW_2tq)|| \
-                         ((SJW) == CAN_SJW_3tq) || ((SJW) == CAN_SJW_4tq))
-
-/* time quantum in bit segment 1 */
-#define CAN_BS1_1tq                 ((u8)0x00)  /* 1 time quantum */
-#define CAN_BS1_2tq                 ((u8)0x01)  /* 2 time quantum */
-#define CAN_BS1_3tq                 ((u8)0x02)  /* 3 time quantum */
-#define CAN_BS1_4tq                 ((u8)0x03)  /* 4 time quantum */
-#define CAN_BS1_5tq                 ((u8)0x04)  /* 5 time quantum */
-#define CAN_BS1_6tq                 ((u8)0x05)  /* 6 time quantum */
-#define CAN_BS1_7tq                 ((u8)0x06)  /* 7 time quantum */
-#define CAN_BS1_8tq                 ((u8)0x07)  /* 8 time quantum */
-#define CAN_BS1_9tq                 ((u8)0x08)  /* 9 time quantum */
-#define CAN_BS1_10tq                ((u8)0x09)  /* 10 time quantum */
-#define CAN_BS1_11tq                ((u8)0x0A)  /* 11 time quantum */
-#define CAN_BS1_12tq                ((u8)0x0B)  /* 12 time quantum */
-#define CAN_BS1_13tq                ((u8)0x0C)  /* 13 time quantum */
-#define CAN_BS1_14tq                ((u8)0x0D)  /* 14 time quantum */
-#define CAN_BS1_15tq                ((u8)0x0E)  /* 15 time quantum */
-#define CAN_BS1_16tq                ((u8)0x0F)  /* 16 time quantum */
-
-#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16tq)
-
-/* time quantum in bit segment 2 */
-#define CAN_BS2_1tq                 ((u8)0x00)  /* 1 time quantum */
-#define CAN_BS2_2tq                 ((u8)0x01)  /* 2 time quantum */
-#define CAN_BS2_3tq                 ((u8)0x02)  /* 3 time quantum */
-#define CAN_BS2_4tq                 ((u8)0x03)  /* 4 time quantum */
-#define CAN_BS2_5tq                 ((u8)0x04)  /* 5 time quantum */
-#define CAN_BS2_6tq                 ((u8)0x05)  /* 6 time quantum */
-#define CAN_BS2_7tq                 ((u8)0x06)  /* 7 time quantum */
-#define CAN_BS2_8tq                 ((u8)0x07)  /* 8 time quantum */
-
-#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8tq)
-
-/* CAN clock prescaler */
-#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024))
-
-/* CAN filter number */
-#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 13)
-
-/* CAN filter mode */
-#define CAN_FilterMode_IdMask       ((u8)0x00)  /* id/mask mode */
-#define CAN_FilterMode_IdList       ((u8)0x01)  /* identifier list mode */
-
-#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FilterMode_IdMask) || \
-                                  ((MODE) == CAN_FilterMode_IdList))
-
-/* CAN filter scale */
-#define CAN_FilterScale_16bit       ((u8)0x00) /* 16-bit filter scale */
-#define CAN_FilterScale_32bit       ((u8)0x01) /* 2-bit filter scale */
-
-#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FilterScale_16bit) || \
-                                    ((SCALE) == CAN_FilterScale_32bit))
-
-/* CAN filter FIFO assignation */
-#define CAN_FilterFIFO0             ((u8)0x00)  /* Filter FIFO 0 assignment for filter x */
-#define CAN_FilterFIFO1             ((u8)0x01)  /* Filter FIFO 1 assignment for filter x */
-
-#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FilterFIFO0) || \
-                                  ((FIFO) == CAN_FilterFIFO1))
-
-/* CAN Tx */
-#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((u8)0x02))
-#define IS_CAN_STDID(STDID)   ((STDID) <= ((u32)0x7FF))
-#define IS_CAN_EXTID(EXTID)   ((EXTID) <= ((u32)0x1FFFFFFF))
-#define IS_CAN_DLC(DLC)       ((DLC) <= ((u8)0x08))
-
-/* CAN identifier type */
-#define CAN_ID_STD                 ((u32)0x00000000)  /* Standard Id */
-#define CAN_ID_EXT                 ((u32)0x00000004)  /* Extended Id */
-
-#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || ((IDTYPE) == CAN_ID_EXT))
-
-/* CAN remote transmission request */
-#define CAN_RTR_DATA                ((u32)0x00000000)  /* Data frame */
-#define CAN_RTR_REMOTE              ((u32)0x00000002)  /* Remote frame */
-
-#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE))
-
-/* CAN transmit constants */
-#define CANTXFAILED                 ((u8)0x00) /* CAN transmission failed */
-#define CANTXOK                     ((u8)0x01) /* CAN transmission succeeded */
-#define CANTXPENDING                ((u8)0x02) /* CAN transmission pending */
-#define CAN_NO_MB                   ((u8)0x04) /* CAN cell did not provide an empty mailbox */
-
-/* CAN receive FIFO number constants */
-#define CAN_FIFO0                 ((u8)0x00) /* CAN FIFO0 used to receive */
-#define CAN_FIFO1                 ((u8)0x01) /* CAN FIFO1 used to receive */
-
-#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1))
-
-/* CAN sleep constants */
-#define CANSLEEPFAILED              ((u8)0x00) /* CAN did not enter the sleep mode */
-#define CANSLEEPOK                  ((u8)0x01) /* CAN entered the sleep mode */
-
-/* CAN wake up constants */
-#define CANWAKEUPFAILED             ((u8)0x00) /* CAN did not leave the sleep mode */
-#define CANWAKEUPOK                 ((u8)0x01) /* CAN leaved the sleep mode */
-
-/* CAN flags */
-#define CAN_FLAG_EWG                ((u32)0x00000001) /* Error Warning Flag */
-#define CAN_FLAG_EPV                ((u32)0x00000002) /* Error Passive Flag */
-#define CAN_FLAG_BOF                ((u32)0x00000004) /* Bus-Off Flag */
-
-#define IS_CAN_FLAG(FLAG) (((FLAG) == CAN_FLAG_EWG) || ((FLAG) == CAN_FLAG_EPV) ||\
-                           ((FLAG) == CAN_FLAG_BOF))
-
-/* CAN interrupts */
-#define CAN_IT_RQCP0                ((u32)0x00000005) /* Request completed mailbox 0 */
-#define CAN_IT_RQCP1                ((u32)0x00000006) /* Request completed mailbox 1 */
-#define CAN_IT_RQCP2                ((u32)0x00000007) /* Request completed mailbox 2 */
-#define CAN_IT_TME                  ((u32)0x00000001) /* Transmit mailbox empty */
-#define CAN_IT_FMP0                 ((u32)0x00000002) /* FIFO 0 message pending */
-#define CAN_IT_FF0                  ((u32)0x00000004) /* FIFO 0 full */
-#define CAN_IT_FOV0                 ((u32)0x00000008) /* FIFO 0 overrun */
-#define CAN_IT_FMP1                 ((u32)0x00000010) /* FIFO 1 message pending */
-#define CAN_IT_FF1                  ((u32)0x00000020) /* FIFO 1 full */
-#define CAN_IT_FOV1                 ((u32)0x00000040) /* FIFO 1 overrun */
-#define CAN_IT_EWG                  ((u32)0x00000100) /* Error warning */
-#define CAN_IT_EPV                  ((u32)0x00000200) /* Error passive */
-#define CAN_IT_BOF                  ((u32)0x00000400) /* Bus-off */
-#define CAN_IT_LEC                  ((u32)0x00000800) /* Last error code */
-#define CAN_IT_ERR                  ((u32)0x00008000) /* Error */
-#define CAN_IT_WKU                  ((u32)0x00010000) /* Wake-up */
-#define CAN_IT_SLK                  ((u32)0x00020000) /* Sleep */
-
-#define IS_CAN_ITConfig(IT) (((IT) == CAN_IT_TME)   || ((IT) == CAN_IT_FMP0)  ||\
-                             ((IT) == CAN_IT_FF0)   || ((IT) == CAN_IT_FOV0)  ||\
-                             ((IT) == CAN_IT_FMP1)  || ((IT) == CAN_IT_FF1)   ||\
-                             ((IT) == CAN_IT_FOV1)  || ((IT) == CAN_IT_EWG)   ||\
-                             ((IT) == CAN_IT_EPV)   || ((IT) == CAN_IT_BOF)   ||\
-                             ((IT) == CAN_IT_LEC)   || ((IT) == CAN_IT_ERR)   ||\
-                             ((IT) == CAN_IT_WKU)   || ((IT) == CAN_IT_SLK))
-
-#define IS_CAN_ITStatus(IT) (((IT) == CAN_IT_RQCP0)  || ((IT) == CAN_IT_RQCP1)  ||\
-                             ((IT) == CAN_IT_RQCP2)  || ((IT) == CAN_IT_FF0)    ||\
-                             ((IT) == CAN_IT_FOV0)   || ((IT) == CAN_IT_FF1)    ||\
-                             ((IT) == CAN_IT_FOV1)   || ((IT) == CAN_IT_EWG)    ||\
-                             ((IT) == CAN_IT_EPV)    || ((IT) == CAN_IT_BOF)    ||\
-                             ((IT) == CAN_IT_WKU)    || ((IT) == CAN_IT_SLK))
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported function protypes ----------------------------------------------- */
-void CAN_DeInit(void);
-u8 CAN_Init(CAN_InitTypeDef* CAN_InitStruct);
-void CAN_FilterInit(CAN_FilterInitTypeDef* CAN_FilterInitStruct);
-void CAN_StructInit(CAN_InitTypeDef* CAN_InitStruct);
-void CAN_ITConfig(u32 CAN_IT, FunctionalState NewState);
-u8 CAN_Transmit(CanTxMsg* TxMessage);
-u8 CAN_TransmitStatus(u8 TransmitMailbox);
-void CAN_CancelTransmit(u8 Mailbox);
-void CAN_FIFORelease(u8 FIFONumber);
-u8 CAN_MessagePending(u8 FIFONumber);
-void CAN_Receive(u8 FIFONumber, CanRxMsg* RxMessage);
-u8 CAN_Sleep(void);
-u8 CAN_WakeUp(void);
-FlagStatus CAN_GetFlagStatus(u32 CAN_FLAG);
-void CAN_ClearFlag(u32 CAN_FLAG);
-ITStatus CAN_GetITStatus(u32 CAN_IT);
-void CAN_ClearITPendingBit(u32 CAN_IT);
-
-#endif /* __STM32F10x_CAN_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_crc.h

@@ -1,37 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_crc.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      CRC firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_CRC_H
-#define __STM32F10x_CRC_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void CRC_ResetDR(void);
-u32 CRC_CalcCRC(u32 Data);
-u32 CRC_CalcBlockCRC(u32 pBuffer[], u32 BufferLength);
-u32 CRC_GetCRC(void);
-void CRC_SetIDRegister(u8 IDValue);
-u8 CRC_GetIDRegister(void);
-
-#endif /* __STM32F10x_CRC_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_dac.h

@@ -1,167 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_dac.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      DAC firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_DAC_H
-#define __STM32F10x_DAC_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* DAC Init structure definition */
-typedef struct
-{
-  u32 DAC_Trigger;
-  u32 DAC_WaveGeneration;
-  u32 DAC_LFSRUnmask_TriangleAmplitude;
-  u32 DAC_OutputBuffer; 
-}DAC_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/* DAC trigger selection */
-#define DAC_Trigger_None                   ((u32)0x00000000)
-#define DAC_Trigger_T6_TRGO                ((u32)0x00000004)
-#define DAC_Trigger_T8_TRGO                ((u32)0x0000000C)
-#define DAC_Trigger_T7_TRGO                ((u32)0x00000014)
-#define DAC_Trigger_T5_TRGO                ((u32)0x0000001C)
-#define DAC_Trigger_T2_TRGO                ((u32)0x00000024)
-#define DAC_Trigger_T4_TRGO                ((u32)0x0000002C)
-#define DAC_Trigger_Ext_IT9                ((u32)0x00000034)
-#define DAC_Trigger_Software               ((u32)0x0000003C)
-
-#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_Trigger_None) || \
-                                 ((TRIGGER) == DAC_Trigger_T6_TRGO) || \
-                                 ((TRIGGER) == DAC_Trigger_T8_TRGO) || \
-                                 ((TRIGGER) == DAC_Trigger_T7_TRGO) || \
-                                 ((TRIGGER) == DAC_Trigger_T5_TRGO) || \
-                                 ((TRIGGER) == DAC_Trigger_T2_TRGO) || \
-                                 ((TRIGGER) == DAC_Trigger_T4_TRGO) || \
-                                 ((TRIGGER) == DAC_Trigger_Ext_IT9) || \
-                                 ((TRIGGER) == DAC_Trigger_Software))
-
-/* DAC wave generation */
-#define DAC_WaveGeneration_None            ((u32)0x00000000)
-#define DAC_WaveGeneration_Noise           ((u32)0x00000040)
-#define DAC_WaveGeneration_Triangle        ((u32)0x00000080)
-
-#define IS_DAC_GENERATE_WAVE(WAVE) (((WAVE) == DAC_WaveGeneration_None) || \
-                                    ((WAVE) == DAC_WaveGeneration_Noise) || \
-                                    ((WAVE) == DAC_WaveGeneration_Triangle))
-
-/* DAC noise wave generation mask / triangle wave generation max amplitude */
-#define DAC_LFSRUnmask_Bit0                ((u32)0x00000000)
-#define DAC_LFSRUnmask_Bits1_0             ((u32)0x00000100)
-#define DAC_LFSRUnmask_Bits2_0             ((u32)0x00000200)
-#define DAC_LFSRUnmask_Bits3_0             ((u32)0x00000300)
-#define DAC_LFSRUnmask_Bits4_0             ((u32)0x00000400)
-#define DAC_LFSRUnmask_Bits5_0             ((u32)0x00000500)
-#define DAC_LFSRUnmask_Bits6_0             ((u32)0x00000600)
-#define DAC_LFSRUnmask_Bits7_0             ((u32)0x00000700)
-#define DAC_LFSRUnmask_Bits8_0             ((u32)0x00000800)
-#define DAC_LFSRUnmask_Bits9_0             ((u32)0x00000900)
-#define DAC_LFSRUnmask_Bits10_0            ((u32)0x00000A00)
-#define DAC_LFSRUnmask_Bits11_0            ((u32)0x00000B00)
-
-#define DAC_TriangleAmplitude_1            ((u32)0x00000000)
-#define DAC_TriangleAmplitude_3            ((u32)0x00000100)
-#define DAC_TriangleAmplitude_7            ((u32)0x00000200)
-#define DAC_TriangleAmplitude_15           ((u32)0x00000300)
-#define DAC_TriangleAmplitude_31           ((u32)0x00000400)
-#define DAC_TriangleAmplitude_63           ((u32)0x00000500)
-#define DAC_TriangleAmplitude_127          ((u32)0x00000600)
-#define DAC_TriangleAmplitude_255          ((u32)0x00000700)
-#define DAC_TriangleAmplitude_511          ((u32)0x00000800)
-#define DAC_TriangleAmplitude_1023         ((u32)0x00000900)
-#define DAC_TriangleAmplitude_2047         ((u32)0x00000A00)
-#define DAC_TriangleAmplitude_4095         ((u32)0x00000B00)
-
-#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUnmask_Bit0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits1_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits2_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits3_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits4_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits5_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits6_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits7_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits8_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits9_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits10_0) || \
-                                                      ((VALUE) == DAC_LFSRUnmask_Bits11_0) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_1) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_3) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_7) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_15) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_31) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_63) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_127) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_255) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_511) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_1023) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_2047) || \
-                                                      ((VALUE) == DAC_TriangleAmplitude_4095))
-
-/* DAC output buffer */
-#define DAC_OutputBuffer_Enable            ((u32)0x00000000)
-#define DAC_OutputBuffer_Disable           ((u32)0x00000002)
-
-#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OutputBuffer_Enable) || \
-                                           ((STATE) == DAC_OutputBuffer_Disable))
-
-/* DAC Channel selection */
-#define DAC_Channel_1                      ((u32)0x00000000)
-#define DAC_Channel_2                      ((u32)0x00000010)
-
-#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_Channel_1) || \
-                                 ((CHANNEL) == DAC_Channel_2))
-
-/* DAC data alignement */
-#define DAC_Align_12b_R                    ((u32)0x00000000)
-#define DAC_Align_12b_L                    ((u32)0x00000004)
-#define DAC_Align_8b_R                     ((u32)0x00000008)
-
-#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_Align_12b_R) || \
-                             ((ALIGN) == DAC_Align_12b_L) || \
-                             ((ALIGN) == DAC_Align_8b_R))
-
-/* DAC wave generation */
-#define DAC_Wave_Noise                     ((u32)0x00000040)
-#define DAC_Wave_Triangle                  ((u32)0x00000080)
-
-#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_Wave_Noise) || \
-                           ((WAVE) == DAC_Wave_Triangle))
-
-/* DAC data ------------------------------------------------------------------*/
-#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) 
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-void DAC_DeInit(void);
-void DAC_Init(u32 DAC_Channel, DAC_InitTypeDef* DAC_InitStruct);
-void DAC_StructInit(DAC_InitTypeDef* DAC_InitStruct);
-void DAC_Cmd(u32 DAC_Channel, FunctionalState NewState);
-void DAC_DMACmd(u32 DAC_Channel, FunctionalState NewState);
-void DAC_SoftwareTriggerCmd(u32 DAC_Channel, FunctionalState NewState);
-void DAC_DualSoftwareTriggerCmd(FunctionalState NewState);
-void DAC_WaveGenerationCmd(u32 DAC_Channel, u32 DAC_Wave, FunctionalState NewState);
-void DAC_SetChannel1Data(u32 DAC_Align, u16 Data);
-void DAC_SetChannel2Data(u32 DAC_Align, u16 Data);
-void DAC_SetDualChannelData(u32 DAC_Align, u16 Data2, u16 Data1);
-u16 DAC_GetDataOutputValue(u32 DAC_Channel);
-
-#endif /*__STM32F10x_DAC_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_dbgmcu.h

@@ -1,55 +0,0 @@
-/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
-* File Name          : stm32f10x_dbgmcu.h
-* Author             : MCD Application Team
-* Version            : V2.0.3Patch1
-* Date               : 04/06/2009
-* Description        : This file contains all the functions prototypes for the
-*                      DBGMCU firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_DBGMCU_H
-#define __STM32F10x_DBGMCU_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-#define DBGMCU_SLEEP                 ((u32)0x00000001)
-#define DBGMCU_STOP                  ((u32)0x00000002)
-#define DBGMCU_STANDBY               ((u32)0x00000004)
-#define DBGMCU_IWDG_STOP             ((u32)0x00000100)
-#define DBGMCU_WWDG_STOP             ((u32)0x00000200)
-#define DBGMCU_TIM1_STOP             ((u32)0x00000400)
-#define DBGMCU_TIM2_STOP             ((u32)0x00000800)
-#define DBGMCU_TIM3_STOP             ((u32)0x00001000)
-#define DBGMCU_TIM4_STOP             ((u32)0x00002000)
-#define DBGMCU_CAN_STOP              ((u32)0x00004000)
-#define DBGMCU_I2C1_SMBUS_TIMEOUT    ((u32)0x00008000)
-#define DBGMCU_I2C2_SMBUS_TIMEOUT    ((u32)0x00010000)
-#define DBGMCU_TIM8_STOP             ((u32)0x00020000)
-#define DBGMCU_TIM5_STOP             ((u32)0x00040000)
-#define DBGMCU_TIM6_STOP             ((u32)0x00080000)
-#define DBGMCU_TIM7_STOP             ((u32)0x00100000)
-                                           
-#define IS_DBGMCU_PERIPH(PERIPH) ((((PERIPH) & 0xFFE000F8) == 0x00) && ((PERIPH) != 0x00))
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-u32 DBGMCU_GetREVID(void);
-u32 DBGMCU_GetDEVID(void);
-void DBGMCU_Config(u32 DBGMCU_Periph, FunctionalState NewState);
-
-#endif /* __STM32F10x_DBGMCU_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
-
-

bsp/stmsky001/library/inc/stm32f10x_dma.h

@@ -1,297 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_dma.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      DMA firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_DMA_H
-#define __STM32F10x_DMA_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* DMA Init structure definition */
-typedef struct
-{
-  u32 DMA_PeripheralBaseAddr;
-  u32 DMA_MemoryBaseAddr;
-  u32 DMA_DIR;
-  u32 DMA_BufferSize;
-  u32 DMA_PeripheralInc;
-  u32 DMA_MemoryInc;
-  u32 DMA_PeripheralDataSize;
-  u32 DMA_MemoryDataSize;
-  u32 DMA_Mode;
-  u32 DMA_Priority;
-  u32 DMA_M2M;
-}DMA_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-#define IS_DMA_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == DMA1_Channel1_BASE) || \
-                                   ((*(u32*)&(PERIPH)) == DMA1_Channel2_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA1_Channel3_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA1_Channel4_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA1_Channel5_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA1_Channel6_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA1_Channel7_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA2_Channel1_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA2_Channel2_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA2_Channel3_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA2_Channel4_BASE)  || \
-                                   ((*(u32*)&(PERIPH)) == DMA2_Channel5_BASE))
-
-/* DMA data transfer direction -----------------------------------------------*/
-#define DMA_DIR_PeripheralDST              ((u32)0x00000010)
-#define DMA_DIR_PeripheralSRC              ((u32)0x00000000)
-
-#define IS_DMA_DIR(DIR) (((DIR) == DMA_DIR_PeripheralDST) || \
-                         ((DIR) == DMA_DIR_PeripheralSRC))
-
-/* DMA peripheral incremented mode -------------------------------------------*/
-#define DMA_PeripheralInc_Enable           ((u32)0x00000040)
-#define DMA_PeripheralInc_Disable          ((u32)0x00000000)
-
-#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PeripheralInc_Enable) || \
-                                            ((STATE) == DMA_PeripheralInc_Disable))
-
-/* DMA memory incremented mode -----------------------------------------------*/
-#define DMA_MemoryInc_Enable               ((u32)0x00000080)
-#define DMA_MemoryInc_Disable              ((u32)0x00000000)
-
-#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MemoryInc_Enable) || \
-                                        ((STATE) == DMA_MemoryInc_Disable))
-
-/* DMA peripheral data size --------------------------------------------------*/
-#define DMA_PeripheralDataSize_Byte        ((u32)0x00000000)
-#define DMA_PeripheralDataSize_HalfWord    ((u32)0x00000100)
-#define DMA_PeripheralDataSize_Word        ((u32)0x00000200)
-
-#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PeripheralDataSize_Byte) || \
-                                           ((SIZE) == DMA_PeripheralDataSize_HalfWord) || \
-                                           ((SIZE) == DMA_PeripheralDataSize_Word))
-
-/* DMA memory data size ------------------------------------------------------*/
-#define DMA_MemoryDataSize_Byte            ((u32)0x00000000)
-#define DMA_MemoryDataSize_HalfWord        ((u32)0x00000400)
-#define DMA_MemoryDataSize_Word            ((u32)0x00000800)
-
-#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MemoryDataSize_Byte) || \
-                                       ((SIZE) == DMA_MemoryDataSize_HalfWord) || \
-                                       ((SIZE) == DMA_MemoryDataSize_Word))
-
-/* DMA circular/normal mode --------------------------------------------------*/
-#define DMA_Mode_Circular                  ((u32)0x00000020)
-#define DMA_Mode_Normal                    ((u32)0x00000000)
-
-#define IS_DMA_MODE(MODE) (((MODE) == DMA_Mode_Circular) || ((MODE) == DMA_Mode_Normal))
-
-/* DMA priority level --------------------------------------------------------*/
-#define DMA_Priority_VeryHigh              ((u32)0x00003000)
-#define DMA_Priority_High                  ((u32)0x00002000)
-#define DMA_Priority_Medium                ((u32)0x00001000)
-#define DMA_Priority_Low                   ((u32)0x00000000)
-
-#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_Priority_VeryHigh) || \
-                                   ((PRIORITY) == DMA_Priority_High) || \
-                                   ((PRIORITY) == DMA_Priority_Medium) || \
-                                   ((PRIORITY) == DMA_Priority_Low))
-
-/* DMA memory to memory ------------------------------------------------------*/
-#define DMA_M2M_Enable                     ((u32)0x00004000)
-#define DMA_M2M_Disable                    ((u32)0x00000000)
-
-#define IS_DMA_M2M_STATE(STATE) (((STATE) == DMA_M2M_Enable) || ((STATE) == DMA_M2M_Disable))
-
-/* DMA interrupts definition -------------------------------------------------*/
-#define DMA_IT_TC                          ((u32)0x00000002)
-#define DMA_IT_HT                          ((u32)0x00000004)
-#define DMA_IT_TE                          ((u32)0x00000008)
-
-#define IS_DMA_CONFIG_IT(IT) ((((IT) & 0xFFFFFFF1) == 0x00) && ((IT) != 0x00))
-
-/* For DMA1 */
-#define DMA1_IT_GL1                        ((u32)0x00000001)
-#define DMA1_IT_TC1                        ((u32)0x00000002)
-#define DMA1_IT_HT1                        ((u32)0x00000004)
-#define DMA1_IT_TE1                        ((u32)0x00000008)
-#define DMA1_IT_GL2                        ((u32)0x00000010)
-#define DMA1_IT_TC2                        ((u32)0x00000020)
-#define DMA1_IT_HT2                        ((u32)0x00000040)
-#define DMA1_IT_TE2                        ((u32)0x00000080)
-#define DMA1_IT_GL3                        ((u32)0x00000100)
-#define DMA1_IT_TC3                        ((u32)0x00000200)
-#define DMA1_IT_HT3                        ((u32)0x00000400)
-#define DMA1_IT_TE3                        ((u32)0x00000800)
-#define DMA1_IT_GL4                        ((u32)0x00001000)
-#define DMA1_IT_TC4                        ((u32)0x00002000)
-#define DMA1_IT_HT4                        ((u32)0x00004000)
-#define DMA1_IT_TE4                        ((u32)0x00008000)
-#define DMA1_IT_GL5                        ((u32)0x00010000)
-#define DMA1_IT_TC5                        ((u32)0x00020000)
-#define DMA1_IT_HT5                        ((u32)0x00040000)
-#define DMA1_IT_TE5                        ((u32)0x00080000)
-#define DMA1_IT_GL6                        ((u32)0x00100000)
-#define DMA1_IT_TC6                        ((u32)0x00200000)
-#define DMA1_IT_HT6                        ((u32)0x00400000)
-#define DMA1_IT_TE6                        ((u32)0x00800000)
-#define DMA1_IT_GL7                        ((u32)0x01000000)
-#define DMA1_IT_TC7                        ((u32)0x02000000)
-#define DMA1_IT_HT7                        ((u32)0x04000000)
-#define DMA1_IT_TE7                        ((u32)0x08000000)
-/* For DMA2 */
-#define DMA2_IT_GL1                        ((u32)0x10000001)
-#define DMA2_IT_TC1                        ((u32)0x10000002)
-#define DMA2_IT_HT1                        ((u32)0x10000004)
-#define DMA2_IT_TE1                        ((u32)0x10000008)
-#define DMA2_IT_GL2                        ((u32)0x10000010)
-#define DMA2_IT_TC2                        ((u32)0x10000020)
-#define DMA2_IT_HT2                        ((u32)0x10000040)
-#define DMA2_IT_TE2                        ((u32)0x10000080)
-#define DMA2_IT_GL3                        ((u32)0x10000100)
-#define DMA2_IT_TC3                        ((u32)0x10000200)
-#define DMA2_IT_HT3                        ((u32)0x10000400)
-#define DMA2_IT_TE3                        ((u32)0x10000800)
-#define DMA2_IT_GL4                        ((u32)0x10001000)
-#define DMA2_IT_TC4                        ((u32)0x10002000)
-#define DMA2_IT_HT4                        ((u32)0x10004000)
-#define DMA2_IT_TE4                        ((u32)0x10008000)
-#define DMA2_IT_GL5                        ((u32)0x10010000)
-#define DMA2_IT_TC5                        ((u32)0x10020000)
-#define DMA2_IT_HT5                        ((u32)0x10040000)
-#define DMA2_IT_TE5                        ((u32)0x10080000)
-
-#define IS_DMA_CLEAR_IT(IT) (((((IT) & 0xF0000000) == 0x00) || (((IT) & 0xEFF00000) == 0x00)) && ((IT) != 0x00))
-#define IS_DMA_GET_IT(IT) (((IT) == DMA1_IT_GL1) || ((IT) == DMA1_IT_TC1) || \
-                           ((IT) == DMA1_IT_HT1) || ((IT) == DMA1_IT_TE1) || \
-                           ((IT) == DMA1_IT_GL2) || ((IT) == DMA1_IT_TC2) || \
-                           ((IT) == DMA1_IT_HT2) || ((IT) == DMA1_IT_TE2) || \
-                           ((IT) == DMA1_IT_GL3) || ((IT) == DMA1_IT_TC3) || \
-                           ((IT) == DMA1_IT_HT3) || ((IT) == DMA1_IT_TE3) || \
-                           ((IT) == DMA1_IT_GL4) || ((IT) == DMA1_IT_TC4) || \
-                           ((IT) == DMA1_IT_HT4) || ((IT) == DMA1_IT_TE4) || \
-                           ((IT) == DMA1_IT_GL5) || ((IT) == DMA1_IT_TC5) || \
-                           ((IT) == DMA1_IT_HT5) || ((IT) == DMA1_IT_TE5) || \
-                           ((IT) == DMA1_IT_GL6) || ((IT) == DMA1_IT_TC6) || \
-                           ((IT) == DMA1_IT_HT6) || ((IT) == DMA1_IT_TE6) || \
-                           ((IT) == DMA1_IT_GL7) || ((IT) == DMA1_IT_TC7) || \
-                           ((IT) == DMA1_IT_HT7) || ((IT) == DMA1_IT_TE7) || \
-                           ((IT) == DMA2_IT_GL1) || ((IT) == DMA2_IT_TC1) || \
-                           ((IT) == DMA2_IT_HT1) || ((IT) == DMA2_IT_TE1) || \
-                           ((IT) == DMA2_IT_GL2) || ((IT) == DMA2_IT_TC2) || \
-                           ((IT) == DMA2_IT_HT2) || ((IT) == DMA2_IT_TE2) || \
-                           ((IT) == DMA2_IT_GL3) || ((IT) == DMA2_IT_TC3) || \
-                           ((IT) == DMA2_IT_HT3) || ((IT) == DMA2_IT_TE3) || \
-                           ((IT) == DMA2_IT_GL4) || ((IT) == DMA2_IT_TC4) || \
-                           ((IT) == DMA2_IT_HT4) || ((IT) == DMA2_IT_TE4) || \
-                           ((IT) == DMA2_IT_GL5) || ((IT) == DMA2_IT_TC5) || \
-                           ((IT) == DMA2_IT_HT5) || ((IT) == DMA2_IT_TE5))
-
-/* DMA flags definition ------------------------------------------------------*/
-/* For DMA1 */
-#define DMA1_FLAG_GL1                      ((u32)0x00000001)
-#define DMA1_FLAG_TC1                      ((u32)0x00000002)
-#define DMA1_FLAG_HT1                      ((u32)0x00000004)
-#define DMA1_FLAG_TE1                      ((u32)0x00000008)
-#define DMA1_FLAG_GL2                      ((u32)0x00000010)
-#define DMA1_FLAG_TC2                      ((u32)0x00000020)
-#define DMA1_FLAG_HT2                      ((u32)0x00000040)
-#define DMA1_FLAG_TE2                      ((u32)0x00000080)
-#define DMA1_FLAG_GL3                      ((u32)0x00000100)
-#define DMA1_FLAG_TC3                      ((u32)0x00000200)
-#define DMA1_FLAG_HT3                      ((u32)0x00000400)
-#define DMA1_FLAG_TE3                      ((u32)0x00000800)
-#define DMA1_FLAG_GL4                      ((u32)0x00001000)
-#define DMA1_FLAG_TC4                      ((u32)0x00002000)
-#define DMA1_FLAG_HT4                      ((u32)0x00004000)
-#define DMA1_FLAG_TE4                      ((u32)0x00008000)
-#define DMA1_FLAG_GL5                      ((u32)0x00010000)
-#define DMA1_FLAG_TC5                      ((u32)0x00020000)
-#define DMA1_FLAG_HT5                      ((u32)0x00040000)
-#define DMA1_FLAG_TE5                      ((u32)0x00080000)
-#define DMA1_FLAG_GL6                      ((u32)0x00100000)
-#define DMA1_FLAG_TC6                      ((u32)0x00200000)
-#define DMA1_FLAG_HT6                      ((u32)0x00400000)
-#define DMA1_FLAG_TE6                      ((u32)0x00800000)
-#define DMA1_FLAG_GL7                      ((u32)0x01000000)
-#define DMA1_FLAG_TC7                      ((u32)0x02000000)
-#define DMA1_FLAG_HT7                      ((u32)0x04000000)
-#define DMA1_FLAG_TE7                      ((u32)0x08000000)
-/* For DMA2 */
-#define DMA2_FLAG_GL1                      ((u32)0x10000001)
-#define DMA2_FLAG_TC1                      ((u32)0x10000002)
-#define DMA2_FLAG_HT1                      ((u32)0x10000004)
-#define DMA2_FLAG_TE1                      ((u32)0x10000008)
-#define DMA2_FLAG_GL2                      ((u32)0x10000010)
-#define DMA2_FLAG_TC2                      ((u32)0x10000020)
-#define DMA2_FLAG_HT2                      ((u32)0x10000040)
-#define DMA2_FLAG_TE2                      ((u32)0x10000080)
-#define DMA2_FLAG_GL3                      ((u32)0x10000100)
-#define DMA2_FLAG_TC3                      ((u32)0x10000200)
-#define DMA2_FLAG_HT3                      ((u32)0x10000400)
-#define DMA2_FLAG_TE3                      ((u32)0x10000800)
-#define DMA2_FLAG_GL4                      ((u32)0x10001000)
-#define DMA2_FLAG_TC4                      ((u32)0x10002000)
-#define DMA2_FLAG_HT4                      ((u32)0x10004000)
-#define DMA2_FLAG_TE4                      ((u32)0x10008000)
-#define DMA2_FLAG_GL5                      ((u32)0x10010000)
-#define DMA2_FLAG_TC5                      ((u32)0x10020000)
-#define DMA2_FLAG_HT5                      ((u32)0x10040000)
-#define DMA2_FLAG_TE5                      ((u32)0x10080000)
-
-#define IS_DMA_CLEAR_FLAG(FLAG) (((((FLAG) & 0xF0000000) == 0x00) || (((FLAG) & 0xEFF00000) == 0x00)) && ((FLAG) != 0x00))
-#define IS_DMA_GET_FLAG(FLAG) (((FLAG) == DMA1_FLAG_GL1) || ((FLAG) == DMA1_FLAG_TC1) || \
-                               ((FLAG) == DMA1_FLAG_HT1) || ((FLAG) == DMA1_FLAG_TE1) || \
-                               ((FLAG) == DMA1_FLAG_GL2) || ((FLAG) == DMA1_FLAG_TC2) || \
-                               ((FLAG) == DMA1_FLAG_HT2) || ((FLAG) == DMA1_FLAG_TE2) || \
-                               ((FLAG) == DMA1_FLAG_GL3) || ((FLAG) == DMA1_FLAG_TC3) || \
-                               ((FLAG) == DMA1_FLAG_HT3) || ((FLAG) == DMA1_FLAG_TE3) || \
-                               ((FLAG) == DMA1_FLAG_GL4) || ((FLAG) == DMA1_FLAG_TC4) || \
-                               ((FLAG) == DMA1_FLAG_HT4) || ((FLAG) == DMA1_FLAG_TE4) || \
-                               ((FLAG) == DMA1_FLAG_GL5) || ((FLAG) == DMA1_FLAG_TC5) || \
-                               ((FLAG) == DMA1_FLAG_HT5) || ((FLAG) == DMA1_FLAG_TE5) || \
-                               ((FLAG) == DMA1_FLAG_GL6) || ((FLAG) == DMA1_FLAG_TC6) || \
-                               ((FLAG) == DMA1_FLAG_HT6) || ((FLAG) == DMA1_FLAG_TE6) || \
-                               ((FLAG) == DMA1_FLAG_GL7) || ((FLAG) == DMA1_FLAG_TC7) || \
-                               ((FLAG) == DMA1_FLAG_HT7) || ((FLAG) == DMA1_FLAG_TE7) || \
-                               ((FLAG) == DMA2_FLAG_GL1) || ((FLAG) == DMA2_FLAG_TC1) || \
-                               ((FLAG) == DMA2_FLAG_HT1) || ((FLAG) == DMA2_FLAG_TE1) || \
-                               ((FLAG) == DMA2_FLAG_GL2) || ((FLAG) == DMA2_FLAG_TC2) || \
-                               ((FLAG) == DMA2_FLAG_HT2) || ((FLAG) == DMA2_FLAG_TE2) || \
-                               ((FLAG) == DMA2_FLAG_GL3) || ((FLAG) == DMA2_FLAG_TC3) || \
-                               ((FLAG) == DMA2_FLAG_HT3) || ((FLAG) == DMA2_FLAG_TE3) || \
-                               ((FLAG) == DMA2_FLAG_GL4) || ((FLAG) == DMA2_FLAG_TC4) || \
-                               ((FLAG) == DMA2_FLAG_HT4) || ((FLAG) == DMA2_FLAG_TE4) || \
-                               ((FLAG) == DMA2_FLAG_GL5) || ((FLAG) == DMA2_FLAG_TC5) || \
-                               ((FLAG) == DMA2_FLAG_HT5) || ((FLAG) == DMA2_FLAG_TE5))
-
-/* DMA Buffer Size -----------------------------------------------------------*/
-#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000))
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void DMA_DeInit(DMA_Channel_TypeDef* DMAy_Channelx);
-void DMA_Init(DMA_Channel_TypeDef* DMAy_Channelx, DMA_InitTypeDef* DMA_InitStruct);
-void DMA_StructInit(DMA_InitTypeDef* DMA_InitStruct);
-void DMA_Cmd(DMA_Channel_TypeDef* DMAy_Channelx, FunctionalState NewState);
-void DMA_ITConfig(DMA_Channel_TypeDef* DMAy_Channelx, u32 DMA_IT, FunctionalState NewState);
-u16 DMA_GetCurrDataCounter(DMA_Channel_TypeDef* DMAy_Channelx);
-FlagStatus DMA_GetFlagStatus(u32 DMA_FLAG);
-void DMA_ClearFlag(u32 DMA_FLAG);
-ITStatus DMA_GetITStatus(u32 DMA_IT);
-void DMA_ClearITPendingBit(u32 DMA_IT);
-
-#endif /*__STM32F10x_DMA_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_exti.h

@@ -1,107 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_exti.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      EXTI firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_EXTI_H
-#define __STM32F10x_EXTI_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* EXTI mode enumeration -----------------------------------------------------*/
-typedef enum
-{
-  EXTI_Mode_Interrupt = 0x00,
-  EXTI_Mode_Event = 0x04
-}EXTIMode_TypeDef;
-
-#define IS_EXTI_MODE(MODE) (((MODE) == EXTI_Mode_Interrupt) || ((MODE) == EXTI_Mode_Event))
-                            
-/* EXTI Trigger enumeration --------------------------------------------------*/
-typedef enum
-{
-  EXTI_Trigger_Rising = 0x08,
-  EXTI_Trigger_Falling = 0x0C,  
-  EXTI_Trigger_Rising_Falling = 0x10
-}EXTITrigger_TypeDef;
-
-#define IS_EXTI_TRIGGER(TRIGGER) (((TRIGGER) == EXTI_Trigger_Rising) || \
-                                  ((TRIGGER) == EXTI_Trigger_Falling) || \
-                                  ((TRIGGER) == EXTI_Trigger_Rising_Falling))
-
-/* EXTI Init Structure definition --------------------------------------------*/
-typedef struct
-{
-  u32 EXTI_Line;
-  EXTIMode_TypeDef EXTI_Mode;
-  EXTITrigger_TypeDef EXTI_Trigger;
-  FunctionalState EXTI_LineCmd;
-}EXTI_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/* EXTI Lines ----------------------------------------------------------------*/
-#define EXTI_Line0       ((u32)0x00001)  /* External interrupt line 0 */
-#define EXTI_Line1       ((u32)0x00002)  /* External interrupt line 1 */
-#define EXTI_Line2       ((u32)0x00004)  /* External interrupt line 2 */
-#define EXTI_Line3       ((u32)0x00008)  /* External interrupt line 3 */
-#define EXTI_Line4       ((u32)0x00010)  /* External interrupt line 4 */
-#define EXTI_Line5       ((u32)0x00020)  /* External interrupt line 5 */
-#define EXTI_Line6       ((u32)0x00040)  /* External interrupt line 6 */
-#define EXTI_Line7       ((u32)0x00080)  /* External interrupt line 7 */
-#define EXTI_Line8       ((u32)0x00100)  /* External interrupt line 8 */
-#define EXTI_Line9       ((u32)0x00200)  /* External interrupt line 9 */
-#define EXTI_Line10      ((u32)0x00400)  /* External interrupt line 10 */
-#define EXTI_Line11      ((u32)0x00800)  /* External interrupt line 11 */
-#define EXTI_Line12      ((u32)0x01000)  /* External interrupt line 12 */
-#define EXTI_Line13      ((u32)0x02000)  /* External interrupt line 13 */
-#define EXTI_Line14      ((u32)0x04000)  /* External interrupt line 14 */
-#define EXTI_Line15      ((u32)0x08000)  /* External interrupt line 15 */
-#define EXTI_Line16      ((u32)0x10000)  /* External interrupt line 16
-                                            Connected to the PVD Output */
-#define EXTI_Line17      ((u32)0x20000)  /* External interrupt line 17 
-                                            Connected to the RTC Alarm event */
-#define EXTI_Line18      ((u32)0x40000)  /* External interrupt line 18 
-                                            Connected to the USB Wakeup from 
-                                            suspend event */
-
-#define IS_EXTI_LINE(LINE) ((((LINE) & (u32)0xFFF80000) == 0x00) && ((LINE) != (u16)0x00))
-
-#define IS_GET_EXTI_LINE(LINE) (((LINE) == EXTI_Line0) || ((LINE) == EXTI_Line1) || \
-                            ((LINE) == EXTI_Line2) || ((LINE) == EXTI_Line3) || \
-                            ((LINE) == EXTI_Line4) || ((LINE) == EXTI_Line5) || \
-                            ((LINE) == EXTI_Line6) || ((LINE) == EXTI_Line7) || \
-                            ((LINE) == EXTI_Line8) || ((LINE) == EXTI_Line9) || \
-                            ((LINE) == EXTI_Line10) || ((LINE) == EXTI_Line11) || \
-                            ((LINE) == EXTI_Line12) || ((LINE) == EXTI_Line13) || \
-                            ((LINE) == EXTI_Line14) || ((LINE) == EXTI_Line15) || \
-                            ((LINE) == EXTI_Line16) || ((LINE) == EXTI_Line17) || \
-                            ((LINE) == EXTI_Line18))
-                                 
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void EXTI_DeInit(void);
-void EXTI_Init(EXTI_InitTypeDef* EXTI_InitStruct);
-void EXTI_StructInit(EXTI_InitTypeDef* EXTI_InitStruct);
-void EXTI_GenerateSWInterrupt(u32 EXTI_Line);
-FlagStatus EXTI_GetFlagStatus(u32 EXTI_Line);
-void EXTI_ClearFlag(u32 EXTI_Line);
-ITStatus EXTI_GetITStatus(u32 EXTI_Line);
-void EXTI_ClearITPendingBit(u32 EXTI_Line);
-
-#endif /* __STM32F10x_EXTI_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_flash.h

@@ -1,208 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_flash.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      FLASH firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_FLASH_H
-#define __STM32F10x_FLASH_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-#ifdef _FLASH_PROG
-/* FLASH Status */
-typedef enum
-{ 
-  FLASH_BUSY = 1,
-  FLASH_ERROR_PG,
-  FLASH_ERROR_WRP,
-  FLASH_COMPLETE,
-  FLASH_TIMEOUT
-}FLASH_Status;
-#endif
-
-/* Flash Latency -------------------------------------------------------------*/
-#define FLASH_Latency_0                ((u32)0x00000000)  /* FLASH Zero Latency cycle */
-#define FLASH_Latency_1                ((u32)0x00000001)  /* FLASH One Latency cycle */
-#define FLASH_Latency_2                ((u32)0x00000002)  /* FLASH Two Latency cycles */
-
-#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_Latency_0) || \
-                                   ((LATENCY) == FLASH_Latency_1) || \
-                                   ((LATENCY) == FLASH_Latency_2))
-
-/* Half Cycle Enable/Disable -------------------------------------------------*/
-#define FLASH_HalfCycleAccess_Enable   ((u32)0x00000008)  /* FLASH Half Cycle Enable */
-#define FLASH_HalfCycleAccess_Disable  ((u32)0x00000000)  /* FLASH Half Cycle Disable */
-
-#define IS_FLASH_HALFCYCLEACCESS_STATE(STATE) (((STATE) == FLASH_HalfCycleAccess_Enable) || \
-                                               ((STATE) == FLASH_HalfCycleAccess_Disable)) 
-
-
-/* Prefetch Buffer Enable/Disable --------------------------------------------*/
-#define FLASH_PrefetchBuffer_Enable    ((u32)0x00000010)  /* FLASH Prefetch Buffer Enable */
-#define FLASH_PrefetchBuffer_Disable   ((u32)0x00000000)  /* FLASH Prefetch Buffer Disable */
-
-#define IS_FLASH_PREFETCHBUFFER_STATE(STATE) (((STATE) == FLASH_PrefetchBuffer_Enable) || \
-                                              ((STATE) == FLASH_PrefetchBuffer_Disable)) 
-
-#ifdef _FLASH_PROG
-/* Option Bytes Write Protection ---------------------------------------------*/
-/* Values to be used with STM32F10Xxx Medium-density devices: FLASH memory density
-   ranges between 32 and 128 Kbytes with page size equal to 1 Kbytes */
-#define FLASH_WRProt_Pages0to3         ((u32)0x00000001) /* Write protection of page 0 to 3 */
-#define FLASH_WRProt_Pages4to7         ((u32)0x00000002) /* Write protection of page 4 to 7 */
-#define FLASH_WRProt_Pages8to11        ((u32)0x00000004) /* Write protection of page 8 to 11 */
-#define FLASH_WRProt_Pages12to15       ((u32)0x00000008) /* Write protection of page 12 to 15 */
-#define FLASH_WRProt_Pages16to19       ((u32)0x00000010) /* Write protection of page 16 to 19 */
-#define FLASH_WRProt_Pages20to23       ((u32)0x00000020) /* Write protection of page 20 to 23 */
-#define FLASH_WRProt_Pages24to27       ((u32)0x00000040) /* Write protection of page 24 to 27 */
-#define FLASH_WRProt_Pages28to31       ((u32)0x00000080) /* Write protection of page 28 to 31 */
-#define FLASH_WRProt_Pages32to35       ((u32)0x00000100) /* Write protection of page 32 to 35 */
-#define FLASH_WRProt_Pages36to39       ((u32)0x00000200) /* Write protection of page 36 to 39 */
-#define FLASH_WRProt_Pages40to43       ((u32)0x00000400) /* Write protection of page 40 to 43 */
-#define FLASH_WRProt_Pages44to47       ((u32)0x00000800) /* Write protection of page 44 to 47 */
-#define FLASH_WRProt_Pages48to51       ((u32)0x00001000) /* Write protection of page 48 to 51 */
-#define FLASH_WRProt_Pages52to55       ((u32)0x00002000) /* Write protection of page 52 to 55 */
-#define FLASH_WRProt_Pages56to59       ((u32)0x00004000) /* Write protection of page 56 to 59 */
-#define FLASH_WRProt_Pages60to63       ((u32)0x00008000) /* Write protection of page 60 to 63 */
-#define FLASH_WRProt_Pages64to67       ((u32)0x00010000) /* Write protection of page 64 to 67 */
-#define FLASH_WRProt_Pages68to71       ((u32)0x00020000) /* Write protection of page 68 to 71 */
-#define FLASH_WRProt_Pages72to75       ((u32)0x00040000) /* Write protection of page 72 to 75 */
-#define FLASH_WRProt_Pages76to79       ((u32)0x00080000) /* Write protection of page 76 to 79 */
-#define FLASH_WRProt_Pages80to83       ((u32)0x00100000) /* Write protection of page 80 to 83 */
-#define FLASH_WRProt_Pages84to87       ((u32)0x00200000) /* Write protection of page 84 to 87 */
-#define FLASH_WRProt_Pages88to91       ((u32)0x00400000) /* Write protection of page 88 to 91 */
-#define FLASH_WRProt_Pages92to95       ((u32)0x00800000) /* Write protection of page 92 to 95 */
-#define FLASH_WRProt_Pages96to99       ((u32)0x01000000) /* Write protection of page 96 to 99 */
-#define FLASH_WRProt_Pages100to103     ((u32)0x02000000) /* Write protection of page 100 to 103 */
-#define FLASH_WRProt_Pages104to107     ((u32)0x04000000) /* Write protection of page 104 to 107 */
-#define FLASH_WRProt_Pages108to111     ((u32)0x08000000) /* Write protection of page 108 to 111 */
-#define FLASH_WRProt_Pages112to115     ((u32)0x10000000) /* Write protection of page 112 to 115 */
-#define FLASH_WRProt_Pages116to119     ((u32)0x20000000) /* Write protection of page 115 to 119 */
-#define FLASH_WRProt_Pages120to123     ((u32)0x40000000) /* Write protection of page 120 to 123 */
-#define FLASH_WRProt_Pages124to127     ((u32)0x80000000) /* Write protection of page 124 to 127 */
-/* Values to be used with STM32F10Xxx High-density devices: FLASH memory density
-   ranges between 256 and 512 Kbytes with page size equal to 2 Kbytes */
-#define FLASH_WRProt_Pages0to1         ((u32)0x00000001) /* Write protection of page 0 to 1 */
-#define FLASH_WRProt_Pages2to3         ((u32)0x00000002) /* Write protection of page 2 to 3 */
-#define FLASH_WRProt_Pages4to5         ((u32)0x00000004) /* Write protection of page 4 to 5 */
-#define FLASH_WRProt_Pages6to7         ((u32)0x00000008) /* Write protection of page 6 to 7 */
-#define FLASH_WRProt_Pages8to9         ((u32)0x00000010) /* Write protection of page 8 to 9 */
-#define FLASH_WRProt_Pages10to11       ((u32)0x00000020) /* Write protection of page 10 to 11 */
-#define FLASH_WRProt_Pages12to13       ((u32)0x00000040) /* Write protection of page 12 to 13 */
-#define FLASH_WRProt_Pages14to15       ((u32)0x00000080) /* Write protection of page 14 to 15 */
-#define FLASH_WRProt_Pages16to17       ((u32)0x00000100) /* Write protection of page 16 to 17 */
-#define FLASH_WRProt_Pages18to19       ((u32)0x00000200) /* Write protection of page 18 to 19 */
-#define FLASH_WRProt_Pages20to21       ((u32)0x00000400) /* Write protection of page 20 to 21 */
-#define FLASH_WRProt_Pages22to23       ((u32)0x00000800) /* Write protection of page 22 to 23 */
-#define FLASH_WRProt_Pages24to25       ((u32)0x00001000) /* Write protection of page 24 to 25 */
-#define FLASH_WRProt_Pages26to27       ((u32)0x00002000) /* Write protection of page 26 to 27 */
-#define FLASH_WRProt_Pages28to29       ((u32)0x00004000) /* Write protection of page 28 to 29 */
-#define FLASH_WRProt_Pages30to31       ((u32)0x00008000) /* Write protection of page 30 to 31 */
-#define FLASH_WRProt_Pages32to33       ((u32)0x00010000) /* Write protection of page 32 to 33 */
-#define FLASH_WRProt_Pages34to35       ((u32)0x00020000) /* Write protection of page 34 to 35 */
-#define FLASH_WRProt_Pages36to37       ((u32)0x00040000) /* Write protection of page 36 to 37 */
-#define FLASH_WRProt_Pages38to39       ((u32)0x00080000) /* Write protection of page 38 to 39 */
-#define FLASH_WRProt_Pages40to41       ((u32)0x00100000) /* Write protection of page 40 to 41 */
-#define FLASH_WRProt_Pages42to43       ((u32)0x00200000) /* Write protection of page 42 to 43 */
-#define FLASH_WRProt_Pages44to45       ((u32)0x00400000) /* Write protection of page 44 to 45 */
-#define FLASH_WRProt_Pages46to47       ((u32)0x00800000) /* Write protection of page 46 to 47 */
-#define FLASH_WRProt_Pages48to49       ((u32)0x01000000) /* Write protection of page 48 to 49 */
-#define FLASH_WRProt_Pages50to51       ((u32)0x02000000) /* Write protection of page 50 to 51 */
-#define FLASH_WRProt_Pages52to53       ((u32)0x04000000) /* Write protection of page 52 to 53 */
-#define FLASH_WRProt_Pages54to55       ((u32)0x08000000) /* Write protection of page 54 to 55 */
-#define FLASH_WRProt_Pages56to57       ((u32)0x10000000) /* Write protection of page 56 to 57 */
-#define FLASH_WRProt_Pages58to59       ((u32)0x20000000) /* Write protection of page 58 to 59 */
-#define FLASH_WRProt_Pages60to61       ((u32)0x40000000) /* Write protection of page 60 to 61 */
-#define FLASH_WRProt_Pages62to255      ((u32)0x80000000) /* Write protection of page 62 to 255 */
-#define FLASH_WRProt_AllPages          ((u32)0xFFFFFFFF) /* Write protection of all Pages */
-
-#define IS_FLASH_WRPROT_PAGE(PAGE) (((PAGE) != 0x00000000))
-
-#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= 0x08000000) && ((ADDRESS) < 0x0807FFFF))
-#define IS_OB_DATA_ADDRESS(ADDRESS) (((ADDRESS) == 0x1FFFF804) || ((ADDRESS) == 0x1FFFF806))
-
-/* Option Bytes IWatchdog ----------------------------------------------------*/
-#define OB_IWDG_SW                     ((u16)0x0001)  /* Software IWDG selected */
-#define OB_IWDG_HW                     ((u16)0x0000)  /* Hardware IWDG selected */
-
-#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW))
-
-/* Option Bytes nRST_STOP ----------------------------------------------------*/
-#define OB_STOP_NoRST                  ((u16)0x0002) /* No reset generated when entering in STOP */
-#define OB_STOP_RST                    ((u16)0x0000) /* Reset generated when entering in STOP */
-
-#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NoRST) || ((SOURCE) == OB_STOP_RST))
-
-/* Option Bytes nRST_STDBY ---------------------------------------------------*/
-#define OB_STDBY_NoRST                 ((u16)0x0004) /* No reset generated when entering in STANDBY */
-#define OB_STDBY_RST                   ((u16)0x0000) /* Reset generated when entering in STANDBY */
-
-#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NoRST) || ((SOURCE) == OB_STDBY_RST))
-
-/* FLASH Interrupts ----------------------------------------------------------*/
-#define FLASH_IT_ERROR                 ((u32)0x00000400)  /* FPEC error interrupt source */
-#define FLASH_IT_EOP                   ((u32)0x00001000)  /* End of FLASH Operation Interrupt source */
-
-#define IS_FLASH_IT(IT) ((((IT) & (u32)0xFFFFEBFF) == 0x00000000) && (((IT) != 0x00000000)))
-
-/* FLASH Flags ---------------------------------------------------------------*/
-#define FLASH_FLAG_BSY                 ((u32)0x00000001)  /* FLASH Busy flag */
-#define FLASH_FLAG_EOP                 ((u32)0x00000020)  /* FLASH End of Operation flag */
-#define FLASH_FLAG_PGERR               ((u32)0x00000004)  /* FLASH Program error flag */
-#define FLASH_FLAG_WRPRTERR            ((u32)0x00000010)  /* FLASH Write protected error flag */
-#define FLASH_FLAG_OPTERR              ((u32)0x00000001)  /* FLASH Option Byte error flag */
- 
-#define IS_FLASH_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFFFFFFCA) == 0x00000000) && ((FLAG) != 0x00000000))
-
-#define IS_FLASH_GET_FLAG(FLAG)  (((FLAG) == FLASH_FLAG_BSY) || ((FLAG) == FLASH_FLAG_EOP) || \
-                                  ((FLAG) == FLASH_FLAG_PGERR) || ((FLAG) == FLASH_FLAG_WRPRTERR) || \
-                                  ((FLAG) == FLASH_FLAG_OPTERR))
-#endif
-								 
-/* Exported constants --------------------------------------------------------*/
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void FLASH_SetLatency(u32 FLASH_Latency);
-void FLASH_HalfCycleAccessCmd(u32 FLASH_HalfCycleAccess);
-void FLASH_PrefetchBufferCmd(u32 FLASH_PrefetchBuffer);
-
-#ifdef _FLASH_PROG
-void FLASH_Unlock(void);
-void FLASH_Lock(void);
-FLASH_Status FLASH_ErasePage(u32 Page_Address);
-FLASH_Status FLASH_EraseAllPages(void);
-FLASH_Status FLASH_EraseOptionBytes(void);
-FLASH_Status FLASH_ProgramWord(u32 Address, u32 Data);
-FLASH_Status FLASH_ProgramHalfWord(u32 Address, u16 Data);
-FLASH_Status FLASH_ProgramOptionByteData(u32 Address, u8 Data);
-FLASH_Status FLASH_EnableWriteProtection(u32 FLASH_Pages);
-FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState);
-FLASH_Status FLASH_UserOptionByteConfig(u16 OB_IWDG, u16 OB_STOP, u16 OB_STDBY);
-u32 FLASH_GetUserOptionByte(void);
-u32 FLASH_GetWriteProtectionOptionByte(void);
-FlagStatus FLASH_GetReadOutProtectionStatus(void);
-FlagStatus FLASH_GetPrefetchBufferStatus(void);
-void FLASH_ITConfig(u16 FLASH_IT, FunctionalState NewState);
-FlagStatus FLASH_GetFlagStatus(u16 FLASH_FLAG);
-void FLASH_ClearFlag(u16 FLASH_FLAG);
-FLASH_Status FLASH_GetStatus(void);
-FLASH_Status FLASH_WaitForLastOperation(u32 Timeout);
-#endif
-
-#endif /* __STM32F10x_FLASH_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_fsmc.h

@@ -1,337 +0,0 @@
-/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
-* File Name          : stm32f10x_fsmc.h
-* Author             : MCD Application Team
-* Version            : V2.0.3Patch1
-* Date               : 04/06/2009
-* Description        : This file contains all the functions prototypes for the
-*                      FSMC firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_FSMC_H
-#define __STM32F10x_FSMC_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* Timing parameters For NOR/SRAM Banks */
-typedef struct
-{
-  u32 FSMC_AddressSetupTime;
-  u32 FSMC_AddressHoldTime;
-  u32 FSMC_DataSetupTime;
-  u32 FSMC_BusTurnAroundDuration;
-  u32 FSMC_CLKDivision;
-  u32 FSMC_DataLatency;
-  u32 FSMC_AccessMode;
-}FSMC_NORSRAMTimingInitTypeDef;
-
-/* FSMC NOR/SRAM Init structure definition */
-typedef struct
-{
-  u32 FSMC_Bank;
-  u32 FSMC_DataAddressMux;
-  u32 FSMC_MemoryType;
-  u32 FSMC_MemoryDataWidth;
-  u32 FSMC_BurstAccessMode;
-  u32 FSMC_WaitSignalPolarity;
-  u32 FSMC_WrapMode;
-  u32 FSMC_WaitSignalActive;
-  u32 FSMC_WriteOperation;
-  u32 FSMC_WaitSignal;
-  u32 FSMC_ExtendedMode;
-  u32 FSMC_WriteBurst;
-  /* Timing Parameters for write and read access if the  ExtendedMode is not used*/
-  FSMC_NORSRAMTimingInitTypeDef* FSMC_ReadWriteTimingStruct;
-  /* Timing Parameters for write access if the  ExtendedMode is used*/
-  FSMC_NORSRAMTimingInitTypeDef* FSMC_WriteTimingStruct;
-}FSMC_NORSRAMInitTypeDef;
-
-/* Timing parameters For FSMC NAND and PCCARD Banks */
-typedef struct
-{
-  u32 FSMC_SetupTime;
-  u32 FSMC_WaitSetupTime;
-  u32 FSMC_HoldSetupTime;
-  u32 FSMC_HiZSetupTime;
-}FSMC_NAND_PCCARDTimingInitTypeDef;
-
-/* FSMC NAND Init structure definition */
-typedef struct
-{
-  u32 FSMC_Bank;
-  u32 FSMC_Waitfeature;
-  u32 FSMC_MemoryDataWidth;
-  u32 FSMC_ECC;
-  u32 FSMC_ECCPageSize;
-  u32 FSMC_TCLRSetupTime;
-  u32 FSMC_TARSetupTime;
-  /* FSMC Common Space Timing */
-  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_CommonSpaceTimingStruct;
-  /* FSMC Attribute Space Timing */
-  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_AttributeSpaceTimingStruct;
-}FSMC_NANDInitTypeDef;
-
-/* FSMC PCCARD Init structure definition */
-typedef struct
-{
-  u32 FSMC_Waitfeature;
-  u32 FSMC_TCLRSetupTime;
-  u32 FSMC_TARSetupTime;
-  /* FSMC Common Space Timing */
-  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_CommonSpaceTimingStruct;
-  /* FSMC Attribute Space Timing */
-  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_AttributeSpaceTimingStruct;
-  /* FSMC IO Space Timing */
-  FSMC_NAND_PCCARDTimingInitTypeDef*  FSMC_IOSpaceTimingStruct;
-}FSMC_PCCARDInitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-/*-------------------------------FSMC Banks definitions ----------------------*/
-#define FSMC_Bank1_NORSRAM1                             ((u32)0x00000000)
-#define FSMC_Bank1_NORSRAM2                             ((u32)0x00000002)
-#define FSMC_Bank1_NORSRAM3                             ((u32)0x00000004)
-#define FSMC_Bank1_NORSRAM4                             ((u32)0x00000006)
-#define FSMC_Bank2_NAND                                 ((u32)0x00000010)
-#define FSMC_Bank3_NAND                                 ((u32)0x00000100)
-#define FSMC_Bank4_PCCARD                               ((u32)0x00001000)
-
-#define IS_FSMC_NORSRAM_BANK(BANK) (((BANK) == FSMC_Bank1_NORSRAM1) || \
-                                    ((BANK) == FSMC_Bank1_NORSRAM2) || \
-                                    ((BANK) == FSMC_Bank1_NORSRAM3) || \
-                                    ((BANK) == FSMC_Bank1_NORSRAM4))                           
-
-
-#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
-                                 ((BANK) == FSMC_Bank3_NAND))
-
-#define IS_FSMC_GETFLAG_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
-                                    ((BANK) == FSMC_Bank3_NAND) || \
-                                    ((BANK) == FSMC_Bank4_PCCARD))
-                                    
-#define IS_FSMC_IT_BANK(BANK) (((BANK) == FSMC_Bank2_NAND) || \
-                               ((BANK) == FSMC_Bank3_NAND) || \
-                               ((BANK) == FSMC_Bank4_PCCARD))                                    
-
-
-/*------------------------------- NOR/SRAM Banks -----------------------------*/
-/* FSMC Data/Address Bus Multiplexing ----------------------------------------*/
-#define FSMC_DataAddressMux_Disable                       ((u32)0x00000000)
-#define FSMC_DataAddressMux_Enable                        ((u32)0x00000002)
-
-#define IS_FSMC_MUX(MUX) (((MUX) == FSMC_DataAddressMux_Disable) || \
-                          ((MUX) == FSMC_DataAddressMux_Enable))                           
-
-/* FSMC Memory Type ----------------------------------------------------------*/
-#define FSMC_MemoryType_SRAM                            ((u32)0x00000000)
-#define FSMC_MemoryType_PSRAM                           ((u32)0x00000004)
-#define FSMC_MemoryType_NOR                             ((u32)0x00000008)
-
-#define IS_FSMC_MEMORY(MEMORY) (((MEMORY) == FSMC_MemoryType_SRAM) || \
-                                ((MEMORY) == FSMC_MemoryType_PSRAM)|| \
-                                ((MEMORY) == FSMC_MemoryType_NOR))
-                                     
-/* FSMC  Data Width ----------------------------------------------------------*/
-#define FSMC_MemoryDataWidth_8b                         ((u32)0x00000000)
-#define FSMC_MemoryDataWidth_16b                        ((u32)0x00000010)
-
-#define IS_FSMC_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
-                                     ((WIDTH) == FSMC_MemoryDataWidth_16b))
-                                      
-                               
-/* FSMC Burst Access Mode ----------------------------------------------------*/
-#define FSMC_BurstAccessMode_Disable                    ((u32)0x00000000) 
-#define FSMC_BurstAccessMode_Enable                     ((u32)0x00000100)
-
-#define IS_FSMC_BURSTMODE(STATE) (((STATE) == FSMC_BurstAccessMode_Disable) || \
-                                  ((STATE) == FSMC_BurstAccessMode_Enable))
-
-/* FSMC Wait Signal Polarity -------------------------------------------------*/                                  
-#define FSMC_WaitSignalPolarity_Low                     ((u32)0x00000000)
-#define FSMC_WaitSignalPolarity_High                    ((u32)0x00000200)
-
-#define IS_FSMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FSMC_WaitSignalPolarity_Low) || \
-                                         ((POLARITY) == FSMC_WaitSignalPolarity_High)) 
-                                        
-/* FSMC Wrap Mode ------------------------------------------------------------*/ 
-#define FSMC_WrapMode_Disable                           ((u32)0x00000000)
-#define FSMC_WrapMode_Enable                            ((u32)0x00000400) 
-
-#define IS_FSMC_WRAP_MODE(MODE) (((MODE) == FSMC_WrapMode_Disable) || \
-                                 ((MODE) == FSMC_WrapMode_Enable))
-                                 
-/* FSMC Wait Timing ----------------------------------------------------------*/                                 
-#define FSMC_WaitSignalActive_BeforeWaitState           ((u32)0x00000000)
-#define FSMC_WaitSignalActive_DuringWaitState           ((u32)0x00000800) 
-
-#define IS_FSMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FSMC_WaitSignalActive_BeforeWaitState) || \
-                                            ((ACTIVE) == FSMC_WaitSignalActive_DuringWaitState))
-                                    
-/* FSMC Write Operation ------------------------------------------------------*/
-#define FSMC_WriteOperation_Disable                     ((u32)0x00000000)
-#define FSMC_WriteOperation_Enable                      ((u32)0x00001000)
-
-#define IS_FSMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FSMC_WriteOperation_Disable) || \
-                                            ((OPERATION) == FSMC_WriteOperation_Enable))
-                              
-/* FSMC Wait Signal ----------------------------------------------------------*/
-#define FSMC_WaitSignal_Disable                         ((u32)0x00000000)
-#define FSMC_WaitSignal_Enable                          ((u32)0x00002000) 
-
-#define IS_FSMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FSMC_WaitSignal_Disable) || \
-                                      ((SIGNAL) == FSMC_WaitSignal_Enable))
-
-/* FSMC Extended Mode --------------------------------------------------------*/
-#define FSMC_ExtendedMode_Disable                       ((u32)0x00000000)
-#define FSMC_ExtendedMode_Enable                        ((u32)0x00004000)                                  
-
-#define IS_FSMC_EXTENDED_MODE(MODE) (((MODE) == FSMC_ExtendedMode_Disable) || \
-                                     ((MODE) == FSMC_ExtendedMode_Enable)) 
-                                                                 
-/* FSMC Write Burst ----------------------------------------------------------*/                                  
-#define FSMC_WriteBurst_Disable                         ((u32)0x00000000)
-#define FSMC_WriteBurst_Enable                          ((u32)0x00080000) 
-
-#define IS_FSMC_WRITE_BURST(BURST) (((BURST) == FSMC_WriteBurst_Disable) || \
-                                    ((BURST) == FSMC_WriteBurst_Enable))
-
-/* FSMC Address Setup Time ---------------------------------------------------*/
-#define IS_FSMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 0xF)
-
-/* FSMC Address Hold Time ----------------------------------------------------*/
-#define IS_FSMC_ADDRESS_HOLD_TIME(TIME) ((TIME) <= 0xF)
-
-/* FSMC Data Setup Time ------------------------------------------------------*/
-#define IS_FSMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 0xFF))
-
-/* FSMC Bus Turn around Duration ---------------------------------------------*/
-#define IS_FSMC_TURNAROUND_TIME(TIME) ((TIME) <= 0xF)
-
-/* FSMC CLK Division ---------------------------------------------------------*/
-#define IS_FSMC_CLK_DIV(DIV) ((DIV) <= 0xF)
-
-/* FSMC Data Latency ---------------------------------------------------------*/
-#define IS_FSMC_DATA_LATENCY(LATENCY) ((LATENCY) <= 0xF)
-
-/* FSMC Access Mode ----------------------------------------------------------*/
-#define FSMC_AccessMode_A                               ((u32)0x00000000)
-#define FSMC_AccessMode_B                               ((u32)0x10000000) 
-#define FSMC_AccessMode_C                               ((u32)0x20000000)
-#define FSMC_AccessMode_D                               ((u32)0x30000000)
-
-#define IS_FSMC_ACCESS_MODE(MODE) (((MODE) == FSMC_AccessMode_A) || \
-                                   ((MODE) == FSMC_AccessMode_B) || \
-                                   ((MODE) == FSMC_AccessMode_C) || \
-                                   ((MODE) == FSMC_AccessMode_D)) 
-                                  
-/*----------------------------- NAND and PCCARD Banks ------------------------*/
-/* FSMC Wait feature ---------------------------------------------------------*/
-#define FSMC_Waitfeature_Disable                        ((u32)0x00000000)
-#define FSMC_Waitfeature_Enable                         ((u32)0x00000002)
-
-#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_Waitfeature_Disable) || \
-                                       ((FEATURE) == FSMC_Waitfeature_Enable))
-                                    
-/* FSMC Memory Data Width ----------------------------------------------------*/
-#define FSMC_MemoryDataWidth_8b                         ((u32)0x00000000)
-#define FSMC_MemoryDataWidth_16b                        ((u32)0x00000010)
-
-#define IS_FSMC_DATA_WIDTH(WIDTH) (((WIDTH) == FSMC_MemoryDataWidth_8b) || \
-                                   ((WIDTH) == FSMC_MemoryDataWidth_16b))
-                                    
-/* FSMC ECC ------------------------------------------------------------------*/
-#define FSMC_ECC_Disable                                ((u32)0x00000000)
-#define FSMC_ECC_Enable                                 ((u32)0x00000040)
-
-#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_ECC_Disable) || \
-                                  ((STATE) == FSMC_ECC_Enable))
-                                            
-/* FSMC ECC Page Size --------------------------------------------------------*/
-#define FSMC_ECCPageSize_256Bytes                       ((u32)0x00000000)
-#define FSMC_ECCPageSize_512Bytes                       ((u32)0x00020000)
-#define FSMC_ECCPageSize_1024Bytes                      ((u32)0x00040000)
-#define FSMC_ECCPageSize_2048Bytes                      ((u32)0x00060000)
-#define FSMC_ECCPageSize_4096Bytes                      ((u32)0x00080000)
-#define FSMC_ECCPageSize_8192Bytes                      ((u32)0x000A0000)
-
-#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_ECCPageSize_256Bytes) || \
-                                    ((SIZE) == FSMC_ECCPageSize_512Bytes) || \
-                                    ((SIZE) == FSMC_ECCPageSize_1024Bytes) || \
-                                    ((SIZE) == FSMC_ECCPageSize_2048Bytes) || \
-                                    ((SIZE) == FSMC_ECCPageSize_4096Bytes) || \
-                                    ((SIZE) == FSMC_ECCPageSize_8192Bytes))
-                                                              
-/* FSMC TCLR Setup Time ------------------------------------------------------*/
-#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 0xFF)
-
-/* FSMC TAR Setup Time -------------------------------------------------------*/
-#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 0xFF)
-
-/* FSMC Setup Time ----------------------------------------------------*/
-#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 0xFF)
-
-/* FSMC Wait Setup Time -----------------------------------------------*/
-#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 0xFF)
-
-/* FSMC Hold Setup Time -----------------------------------------------*/
-#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 0xFF)
-
-/* FSMC HiZ Setup Time ------------------------------------------------*/
-#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 0xFF)
-
-/* FSMC Interrupt sources ----------------------------------------------------*/
-#define FSMC_IT_RisingEdge                              ((u32)0x00000008)
-#define FSMC_IT_Level                                   ((u32)0x00000010)
-#define FSMC_IT_FallingEdge                             ((u32)0x00000020)
-
-#define IS_FSMC_IT(IT) ((((IT) & (u32)0xFFFFFFC7) == 0x00000000) && ((IT) != 0x00000000))
-
-#define IS_FSMC_GET_IT(IT) (((IT) == FSMC_IT_RisingEdge) || \
-                            ((IT) == FSMC_IT_Level) || \
-                            ((IT) == FSMC_IT_FallingEdge)) 
-
-/* FSMC Flags ----------------------------------------------------------------*/
-#define FSMC_FLAG_RisingEdge                            ((u32)0x00000001)
-#define FSMC_FLAG_Level                                 ((u32)0x00000002)
-#define FSMC_FLAG_FallingEdge                           ((u32)0x00000004)
-#define FSMC_FLAG_FEMPT                                 ((u32)0x00000040)
-
-#define IS_FSMC_GET_FLAG(FLAG) (((FLAG) == FSMC_FLAG_RisingEdge) || \
-                                ((FLAG) == FSMC_FLAG_Level) || \
-                                ((FLAG) == FSMC_FLAG_FallingEdge) || \
-                                ((FLAG) == FSMC_FLAG_FEMPT))
-
-#define IS_FSMC_CLEAR_FLAG(FLAG) ((((FLAG) & (u32)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))                                                                                                                                                                                                                                                                                                                                  
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void FSMC_NORSRAMDeInit(u32 FSMC_Bank);
-void FSMC_NANDDeInit(u32 FSMC_Bank);
-void FSMC_PCCARDDeInit(void);
-void FSMC_NORSRAMInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
-void FSMC_NANDInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
-void FSMC_PCCARDInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
-void FSMC_NORSRAMStructInit(FSMC_NORSRAMInitTypeDef* FSMC_NORSRAMInitStruct);
-void FSMC_NANDStructInit(FSMC_NANDInitTypeDef* FSMC_NANDInitStruct);
-void FSMC_PCCARDStructInit(FSMC_PCCARDInitTypeDef* FSMC_PCCARDInitStruct);
-void FSMC_NORSRAMCmd(u32 FSMC_Bank, FunctionalState NewState);
-void FSMC_NANDCmd(u32 FSMC_Bank, FunctionalState NewState);
-void FSMC_PCCARDCmd(FunctionalState NewState);
-void FSMC_NANDECCCmd(u32 FSMC_Bank, FunctionalState NewState);
-u32 FSMC_GetECC(u32 FSMC_Bank);
-void FSMC_ITConfig(u32 FSMC_Bank, u32 FSMC_IT, FunctionalState NewState);
-FlagStatus FSMC_GetFlagStatus(u32 FSMC_Bank, u32 FSMC_FLAG);
-void FSMC_ClearFlag(u32 FSMC_Bank, u32 FSMC_FLAG);
-ITStatus FSMC_GetITStatus(u32 FSMC_Bank, u32 FSMC_IT);
-void FSMC_ClearITPendingBit(u32 FSMC_Bank, u32 FSMC_IT);
-
-#endif /*__STM32F10x_FSMC_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_gpio.h

@@ -1,237 +0,0 @@
-/******************** (C) COPYRIGHT 2008 STMicroelectronics ********************
-* File Name          : stm32f10x_gpio.h
-* Author             : MCD Application Team
-* Version            : V2.0.3
-* Date               : 09/22/2008
-* Description        : This file contains all the functions prototypes for the
-*                      GPIO firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_GPIO_H
-#define __STM32F10x_GPIO_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-#define IS_GPIO_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == GPIOA_BASE) || \
-                                    ((*(u32*)&(PERIPH)) == GPIOB_BASE) || \
-                                    ((*(u32*)&(PERIPH)) == GPIOC_BASE) || \
-                                    ((*(u32*)&(PERIPH)) == GPIOD_BASE) || \
-                                    ((*(u32*)&(PERIPH)) == GPIOE_BASE) || \
-                                    ((*(u32*)&(PERIPH)) == GPIOF_BASE) || \
-                                    ((*(u32*)&(PERIPH)) == GPIOG_BASE))
-                                     
-/* Output Maximum frequency selection ----------------------------------------*/
-typedef enum
-{ 
-  GPIO_Speed_10MHz = 1,
-  GPIO_Speed_2MHz, 
-  GPIO_Speed_50MHz
-}GPIOSpeed_TypeDef;
-
-#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_Speed_10MHz) || ((SPEED) == GPIO_Speed_2MHz) || \
-                              ((SPEED) == GPIO_Speed_50MHz))
-                                         
-/* Configuration Mode enumeration --------------------------------------------*/
-typedef enum
-{ GPIO_Mode_AIN = 0x0,
-  GPIO_Mode_IN_FLOATING = 0x04,
-  GPIO_Mode_IPD = 0x28,
-  GPIO_Mode_IPU = 0x48,
-  GPIO_Mode_Out_OD = 0x14,
-  GPIO_Mode_Out_PP = 0x10,
-  GPIO_Mode_AF_OD = 0x1C,
-  GPIO_Mode_AF_PP = 0x18
-}GPIOMode_TypeDef;
-
-#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_Mode_AIN) || ((MODE) == GPIO_Mode_IN_FLOATING) || \
-                            ((MODE) == GPIO_Mode_IPD) || ((MODE) == GPIO_Mode_IPU) || \
-                            ((MODE) == GPIO_Mode_Out_OD) || ((MODE) == GPIO_Mode_Out_PP) || \
-                            ((MODE) == GPIO_Mode_AF_OD) || ((MODE) == GPIO_Mode_AF_PP))
-                              
-/* GPIO Init structure definition */
-typedef struct
-{
-  u16 GPIO_Pin;
-  GPIOSpeed_TypeDef GPIO_Speed;
-  GPIOMode_TypeDef GPIO_Mode;
-}GPIO_InitTypeDef;
-
-/* Bit_SET and Bit_RESET enumeration -----------------------------------------*/
-typedef enum
-{ Bit_RESET = 0,
-  Bit_SET
-}BitAction;
-#define IS_GPIO_BIT_ACTION(ACTION) (((ACTION) == Bit_RESET) || ((ACTION) == Bit_SET))
-
-/* Exported constants --------------------------------------------------------*/
-/* GPIO pins define ----------------------------------------------------------*/
-#define GPIO_Pin_0                 ((u16)0x0001)  /* Pin 0 selected */
-#define GPIO_Pin_1                 ((u16)0x0002)  /* Pin 1 selected */
-#define GPIO_Pin_2                 ((u16)0x0004)  /* Pin 2 selected */
-#define GPIO_Pin_3                 ((u16)0x0008)  /* Pin 3 selected */
-#define GPIO_Pin_4                 ((u16)0x0010)  /* Pin 4 selected */
-#define GPIO_Pin_5                 ((u16)0x0020)  /* Pin 5 selected */
-#define GPIO_Pin_6                 ((u16)0x0040)  /* Pin 6 selected */
-#define GPIO_Pin_7                 ((u16)0x0080)  /* Pin 7 selected */
-#define GPIO_Pin_8                 ((u16)0x0100)  /* Pin 8 selected */
-#define GPIO_Pin_9                 ((u16)0x0200)  /* Pin 9 selected */
-#define GPIO_Pin_10                ((u16)0x0400)  /* Pin 10 selected */
-#define GPIO_Pin_11                ((u16)0x0800)  /* Pin 11 selected */
-#define GPIO_Pin_12                ((u16)0x1000)  /* Pin 12 selected */
-#define GPIO_Pin_13                ((u16)0x2000)  /* Pin 13 selected */
-#define GPIO_Pin_14                ((u16)0x4000)  /* Pin 14 selected */
-#define GPIO_Pin_15                ((u16)0x8000)  /* Pin 15 selected */
-#define GPIO_Pin_All               ((u16)0xFFFF)  /* All pins selected */
-
-#define IS_GPIO_PIN(PIN) ((((PIN) & (u16)0x00) == 0x00) && ((PIN) != (u16)0x00))
-
-#define IS_GET_GPIO_PIN(PIN) (((PIN) == GPIO_Pin_0) || \
-                              ((PIN) == GPIO_Pin_1) || \
-                              ((PIN) == GPIO_Pin_2) || \
-                              ((PIN) == GPIO_Pin_3) || \
-                              ((PIN) == GPIO_Pin_4) || \
-                              ((PIN) == GPIO_Pin_5) || \
-                              ((PIN) == GPIO_Pin_6) || \
-                              ((PIN) == GPIO_Pin_7) || \
-                              ((PIN) == GPIO_Pin_8) || \
-                              ((PIN) == GPIO_Pin_9) || \
-                              ((PIN) == GPIO_Pin_10) || \
-                              ((PIN) == GPIO_Pin_11) || \
-                              ((PIN) == GPIO_Pin_12) || \
-                              ((PIN) == GPIO_Pin_13) || \
-                              ((PIN) == GPIO_Pin_14) || \
-                              ((PIN) == GPIO_Pin_15))
-                            
-/* GPIO Remap define ---------------------------------------------------------*/
-#define GPIO_Remap_SPI1            ((u32)0x00000001)  /* SPI1 Alternate Function mapping */
-#define GPIO_Remap_I2C1            ((u32)0x00000002)  /* I2C1 Alternate Function mapping */
-#define GPIO_Remap_USART1          ((u32)0x00000004)  /* USART1 Alternate Function mapping */
-#define GPIO_Remap_USART2          ((u32)0x00000008)  /* USART2 Alternate Function mapping */
-#define GPIO_PartialRemap_USART3   ((u32)0x00140010)  /* USART3 Partial Alternate Function mapping */
-#define GPIO_FullRemap_USART3      ((u32)0x00140030)  /* USART3 Full Alternate Function mapping */
-#define GPIO_PartialRemap_TIM1     ((u32)0x00160040)  /* TIM1 Partial Alternate Function mapping */
-#define GPIO_FullRemap_TIM1        ((u32)0x001600C0)  /* TIM1 Full Alternate Function mapping */
-#define GPIO_PartialRemap1_TIM2    ((u32)0x00180100)  /* TIM2 Partial1 Alternate Function mapping */
-#define GPIO_PartialRemap2_TIM2    ((u32)0x00180200)  /* TIM2 Partial2 Alternate Function mapping */
-#define GPIO_FullRemap_TIM2        ((u32)0x00180300)  /* TIM2 Full Alternate Function mapping */
-#define GPIO_PartialRemap_TIM3     ((u32)0x001A0800)  /* TIM3 Partial Alternate Function mapping */
-#define GPIO_FullRemap_TIM3        ((u32)0x001A0C00)  /* TIM3 Full Alternate Function mapping */
-#define GPIO_Remap_TIM4            ((u32)0x00001000)  /* TIM4 Alternate Function mapping */
-#define GPIO_Remap1_CAN            ((u32)0x001D4000)  /* CAN Alternate Function mapping */
-#define GPIO_Remap2_CAN            ((u32)0x001D6000)  /* CAN Alternate Function mapping */
-#define GPIO_Remap_PD01            ((u32)0x00008000)  /* PD01 Alternate Function mapping */
-#define GPIO_Remap_TIM5CH4_LSI     ((u32)0x00200001)  /* LSI connected to TIM5 Channel4 input capture for calibration */
-#define GPIO_Remap_ADC1_ETRGINJ    ((u32)0x00200002)  /* ADC1 External Trigger Injected Conversion remapping */
-#define GPIO_Remap_ADC1_ETRGREG    ((u32)0x00200004)  /* ADC1 External Trigger Regular Conversion remapping */
-#define GPIO_Remap_ADC2_ETRGINJ    ((u32)0x00200008)  /* ADC2 External Trigger Injected Conversion remapping */
-#define GPIO_Remap_ADC2_ETRGREG    ((u32)0x00200010)  /* ADC2 External Trigger Regular Conversion remapping */
-#define GPIO_Remap_SWJ_NoJTRST     ((u32)0x00300100)  /* Full SWJ Enabled (JTAG-DP + SW-DP) but without JTRST */
-#define GPIO_Remap_SWJ_JTAGDisable ((u32)0x00300200)  /* JTAG-DP Disabled and SW-DP Enabled */
-#define GPIO_Remap_SWJ_Disable     ((u32)0x00300400)  /* Full SWJ Disabled (JTAG-DP + SW-DP) */
-
-
-#define IS_GPIO_REMAP(REMAP) (((REMAP) == GPIO_Remap_SPI1) || ((REMAP) == GPIO_Remap_I2C1) || \
-                              ((REMAP) == GPIO_Remap_USART1) || ((REMAP) == GPIO_Remap_USART2) || \
-                              ((REMAP) == GPIO_PartialRemap_USART3) || ((REMAP) == GPIO_FullRemap_USART3) || \
-                              ((REMAP) == GPIO_PartialRemap_TIM1) || ((REMAP) == GPIO_FullRemap_TIM1) || \
-                              ((REMAP) == GPIO_PartialRemap1_TIM2) || ((REMAP) == GPIO_PartialRemap2_TIM2) || \
-                              ((REMAP) == GPIO_FullRemap_TIM2) || ((REMAP) == GPIO_PartialRemap_TIM3) || \
-                              ((REMAP) == GPIO_FullRemap_TIM3) || ((REMAP) == GPIO_Remap_TIM4) || \
-                              ((REMAP) == GPIO_Remap1_CAN) || ((REMAP) == GPIO_Remap2_CAN) || \
-                              ((REMAP) == GPIO_Remap_PD01) || ((REMAP) == GPIO_Remap_TIM5CH4_LSI) || \
-                              ((REMAP) == GPIO_Remap_ADC1_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC1_ETRGREG) || \
-                              ((REMAP) == GPIO_Remap_ADC2_ETRGINJ) ||((REMAP) == GPIO_Remap_ADC2_ETRGREG) || \
-                              ((REMAP) == GPIO_Remap_SWJ_NoJTRST) || ((REMAP) == GPIO_Remap_SWJ_JTAGDisable)|| \
-                              ((REMAP) == GPIO_Remap_SWJ_Disable))
-                              
-/* GPIO Port Sources ---------------------------------------------------------*/
-#define GPIO_PortSourceGPIOA       ((u8)0x00)
-#define GPIO_PortSourceGPIOB       ((u8)0x01)
-#define GPIO_PortSourceGPIOC       ((u8)0x02)
-#define GPIO_PortSourceGPIOD       ((u8)0x03)
-#define GPIO_PortSourceGPIOE       ((u8)0x04)
-#define GPIO_PortSourceGPIOF       ((u8)0x05)
-#define GPIO_PortSourceGPIOG       ((u8)0x06)
-
-#define IS_GPIO_EVENTOUT_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
-                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
-                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
-                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
-                                                  ((PORTSOURCE) == GPIO_PortSourceGPIOE))
-                                         
-#define IS_GPIO_EXTI_PORT_SOURCE(PORTSOURCE) (((PORTSOURCE) == GPIO_PortSourceGPIOA) || \
-                                              ((PORTSOURCE) == GPIO_PortSourceGPIOB) || \
-                                              ((PORTSOURCE) == GPIO_PortSourceGPIOC) || \
-                                              ((PORTSOURCE) == GPIO_PortSourceGPIOD) || \
-                                              ((PORTSOURCE) == GPIO_PortSourceGPIOE) || \
-                                              ((PORTSOURCE) == GPIO_PortSourceGPIOF) || \
-                                              ((PORTSOURCE) == GPIO_PortSourceGPIOG))
-                                       
-/* GPIO Pin sources ----------------------------------------------------------*/
-#define GPIO_PinSource0            ((u8)0x00)
-#define GPIO_PinSource1            ((u8)0x01)
-#define GPIO_PinSource2            ((u8)0x02)
-#define GPIO_PinSource3            ((u8)0x03)
-#define GPIO_PinSource4            ((u8)0x04)
-#define GPIO_PinSource5            ((u8)0x05)
-#define GPIO_PinSource6            ((u8)0x06)
-#define GPIO_PinSource7            ((u8)0x07)
-#define GPIO_PinSource8            ((u8)0x08)
-#define GPIO_PinSource9            ((u8)0x09)
-#define GPIO_PinSource10           ((u8)0x0A)
-#define GPIO_PinSource11           ((u8)0x0B)
-#define GPIO_PinSource12           ((u8)0x0C)
-#define GPIO_PinSource13           ((u8)0x0D)
-#define GPIO_PinSource14           ((u8)0x0E)
-#define GPIO_PinSource15           ((u8)0x0F)
-
-#define IS_GPIO_PIN_SOURCE(PINSOURCE) (((PINSOURCE) == GPIO_PinSource0) || \
-                                       ((PINSOURCE) == GPIO_PinSource1) || \
-                                       ((PINSOURCE) == GPIO_PinSource2) || \
-                                       ((PINSOURCE) == GPIO_PinSource3) || \
-                                       ((PINSOURCE) == GPIO_PinSource4) || \
-                                       ((PINSOURCE) == GPIO_PinSource5) || \
-                                       ((PINSOURCE) == GPIO_PinSource6) || \
-                                       ((PINSOURCE) == GPIO_PinSource7) || \
-                                       ((PINSOURCE) == GPIO_PinSource8) || \
-                                       ((PINSOURCE) == GPIO_PinSource9) || \
-                                       ((PINSOURCE) == GPIO_PinSource10) || \
-                                       ((PINSOURCE) == GPIO_PinSource11) || \
-                                       ((PINSOURCE) == GPIO_PinSource12) || \
-                                       ((PINSOURCE) == GPIO_PinSource13) || \
-                                       ((PINSOURCE) == GPIO_PinSource14) || \
-                                       ((PINSOURCE) == GPIO_PinSource15))
-                          
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void GPIO_DeInit(GPIO_TypeDef* GPIOx);
-void GPIO_AFIODeInit(void);
-void GPIO_Init(GPIO_TypeDef* GPIOx, GPIO_InitTypeDef* GPIO_InitStruct);
-void GPIO_StructInit(GPIO_InitTypeDef* GPIO_InitStruct);
-u8 GPIO_ReadInputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin);
-u16 GPIO_ReadInputData(GPIO_TypeDef* GPIOx);
-u8 GPIO_ReadOutputDataBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin);
-u16 GPIO_ReadOutputData(GPIO_TypeDef* GPIOx);
-void GPIO_SetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin);
-void GPIO_ResetBits(GPIO_TypeDef* GPIOx, u16 GPIO_Pin);
-void GPIO_WriteBit(GPIO_TypeDef* GPIOx, u16 GPIO_Pin, BitAction BitVal);
-void GPIO_Write(GPIO_TypeDef* GPIOx, u16 PortVal);
-void GPIO_PinLockConfig(GPIO_TypeDef* GPIOx, u16 GPIO_Pin);
-void GPIO_EventOutputConfig(u8 GPIO_PortSource, u8 GPIO_PinSource);
-void GPIO_EventOutputCmd(FunctionalState NewState);
-void GPIO_PinRemapConfig(u32 GPIO_Remap, FunctionalState NewState);
-void GPIO_EXTILineConfig(u8 GPIO_PortSource, u8 GPIO_PinSource);
-
-#endif /* __STM32F10x_GPIO_H */
-
-/******************* (C) COPYRIGHT 2008 STMicroelectronics *****END OF FILE****/

bsp/stmsky001/library/inc/stm32f10x_i2c.h

@@ -1,285 +0,0 @@
-/******************** (C) COPYRIGHT 2009 STMicroelectronics ********************
-* File Name          : stm32f10x_i2c.h
-* Author             : MCD Application Team
-* Version            : V2.0.3Patch1
-* Date               : 04/06/2009
-* Description        : This file contains all the functions prototypes for the
-*                      I2C firmware library.
-********************************************************************************
-* THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
-* WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE TIME.
-* AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY DIRECT,
-* INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING FROM THE
-* CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE CODING
-* INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
-*******************************************************************************/
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32F10x_I2C_H    
-#define __STM32F10x_I2C_H
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f10x_map.h"
-
-/* Exported types ------------------------------------------------------------*/
-/* I2C Init structure definition */
-typedef struct
-{
-  u16 I2C_Mode;
-  u16 I2C_DutyCycle;
-  u16 I2C_OwnAddress1;
-  u16 I2C_Ack;
-  u16 I2C_AcknowledgedAddress;
-  u32 I2C_ClockSpeed;
-}I2C_InitTypeDef;
-
-/* Exported constants --------------------------------------------------------*/
-#define IS_I2C_ALL_PERIPH(PERIPH) (((*(u32*)&(PERIPH)) == I2C1_BASE) || \
-                                   ((*(u32*)&(PERIPH)) == I2C2_BASE))
-
-/* I2C modes */
-#define I2C_Mode_I2C                    ((u16)0x0000)
-#define I2C_Mode_SMBusDevice            ((u16)0x0002)
-#define I2C_Mode_SMBusHost              ((u16)0x000A)
-
-#define IS_I2C_MODE(MODE) (((MODE) == I2C_Mode_I2C) || \
-                           ((MODE) == I2C_Mode_SMBusDevice) || \
-                           ((MODE) == I2C_Mode_SMBusHost))
-/* I2C duty cycle in fast mode */
-#define I2C_DutyCycle_16_9              ((u16)0x4000)
-#define I2C_DutyCycle_2                 ((u16)0xBFFF)
-
-#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DutyCycle_16_9) || \
-                                  ((CYCLE) == I2C_DutyCycle_2))
-
-/* I2C cknowledgementy */
-#define I2C_Ack_Enable                  ((u16)0x0400)
-#define I2C_Ack_Disable                 ((u16)0x0000)
-
-#define IS_I2C_ACK_STATE(STATE) (((STATE) == I2C_Ack_Enable) || \
-                                 ((STATE) == I2C_Ack_Disable))
-
-/* I2C transfer direction */
-#define  I2C_Direction_Transmitter      ((u8)0x00)
-#define  I2C_Direction_Receiver         ((u8)0x01)
-
-#define IS_I2C_DIRECTION(DIRECTION) (((DIRECTION) == I2C_Direction_Transmitter) || \
-                                     ((DIRECTION) == I2C_Direction_Receiver))
-
-/* I2C acknowledged address defines */
-#define I2C_AcknowledgedAddress_7bit    ((u16)0x4000)
-#define I2C_AcknowledgedAddress_10bit   ((u16)0xC000)
-
-#define IS_I2C_ACKNOWLEDGE_ADDRESS(ADDRESS) (((ADDRESS) == I2C_AcknowledgedAddress_7bit) || \
-                                             ((ADDRESS) == I2C_AcknowledgedAddress_10bit))
-
-/* I2C registers */
-#define I2C_Register_CR1                ((u8)0x00)
-#define I2C_Register_CR2                ((u8)0x04)
-#define I2C_Register_OAR1               ((u8)0x08)
-#define I2C_Register_OAR2               ((u8)0x0C)
-#define I2C_Register_DR                 ((u8)0x10)
-#define I2C_Register_SR1                ((u8)0x14)
-#define I2C_Register_SR2                ((u8)0x18)
-#define I2C_Register_CCR                ((u8)0x1C)
-#define I2C_Register_TRISE              ((u8)0x20)
-
-#define IS_I2C_REGISTER(REGISTER) (((REGISTER) == I2C_Register_CR1) || \
-                                   ((REGISTER) == I2C_Register_CR2) || \
-                                   ((REGISTER) == I2C_Register_OAR1) || \
-                                   ((REGISTER) == I2C_Register_OAR2) || \
-                                   ((REGISTER) == I2C_Register_DR) || \
-                                   ((REGISTER) == I2C_Register_SR1) || \
-                                   ((REGISTER) == I2C_Register_SR2) || \
-                                   ((REGISTER) == I2C_Register_CCR) || \
-                                   ((REGISTER) == I2C_Register_TRISE))
-
-/* I2C SMBus alert pin level */
-#define I2C_SMBusAlert_Low              ((u16)0x2000)
-#define I2C_SMBusAlert_High             ((u16)0xDFFF)
-
-#define IS_I2C_SMBUS_ALERT(ALERT) (((ALERT) == I2C_SMBusAlert_Low) || \
-                                   ((ALERT) == I2C_SMBusAlert_High))
-
-/* I2C PEC position */
-#define I2C_PECPosition_Next            ((u16)0x0800)
-#define I2C_PECPosition_Current         ((u16)0xF7FF)
-
-#define IS_I2C_PEC_POSITION(POSITION) (((POSITION) == I2C_PECPosition_Next) || \
-                                       ((POSITION) == I2C_PECPosition_Current))
-
-/* I2C interrupts definition */
-#define I2C_IT_BUF                      ((u16)0x0400)
-#define I2C_IT_EVT                      ((u16)0x0200)
-#define I2C_IT_ERR                      ((u16)0x0100)
-
-#define IS_I2C_CONFIG_IT(IT) ((((IT) & (u16)0xF8FF) == 0x00) && ((IT) != 0x00))
-
-/* I2C interrupts definition */
-#define I2C_IT_SMBALERT                 ((u32)0x01008000)
-#define I2C_IT_TIMEOUT                  ((u32)0x01004000)
-#define I2C_IT_PECERR                   ((u32)0x01001000)
-#define I2C_IT_OVR                      ((u32)0x01000800)
-#define I2C_IT_AF                       ((u32)0x01000400)
-#define I2C_IT_ARLO                     ((u32)0x01000200)
-#define I2C_IT_BERR                     ((u32)0x01000100)
-#define I2C_IT_TXE                      ((u32)0x06000080)
-#define I2C_IT_RXNE                     ((u32)0x06000040)
-#define I2C_IT_STOPF                    ((u32)0x02000010)
-#define I2C_IT_ADD10                    ((u32)0x02000008)
-#define I2C_IT_BTF                      ((u32)0x02000004)
-#define I2C_IT_ADDR                     ((u32)0x02000002)
-#define I2C_IT_SB                       ((u32)0x02000001)
-
-#define IS_I2C_CLEAR_IT(IT) ((((IT) & (u16)0x20FF) == 0x00) && ((IT) != (u16)0x00))                             
-
-#define IS_I2C_GET_IT(IT) (((IT) == I2C_IT_SMBALERT) || ((IT) == I2C_IT_TIMEOUT) || \
-                           ((IT) == I2C_IT_PECERR) || ((IT) == I2C_IT_OVR) || \
-                           ((IT) == I2C_IT_AF) || ((IT) == I2C_IT_ARLO) || \
-                           ((IT) == I2C_IT_BERR) || ((IT) == I2C_IT_TXE) || \
-                           ((IT) == I2C_IT_RXNE) || ((IT) == I2C_IT_STOPF) || \
-                           ((IT) == I2C_IT_ADD10) || ((IT) == I2C_IT_BTF) || \
-                           ((IT) == I2C_IT_ADDR) || ((IT) == I2C_IT_SB))
-
-/* I2C flags definition */
-/* SR2 register flags */
-#define I2C_FLAG_DUALF                  ((u32)0x00800000)
-#define I2C_FLAG_SMBHOST                ((u32)0x00400000)
-#define I2C_FLAG_SMBDEFAULT             ((u32)0x00200000)
-#define I2C_FLAG_GENCALL                ((u32)0x00100000)
-#define I2C_FLAG_TRA                    ((u32)0x00040000)
-#define I2C_FLAG_BUSY                   ((u32)0x00020000)
-#define I2C_FLAG_MSL                    ((u32)0x00010000)
-/* SR1 register flags */
-#define I2C_FLAG_SMBALERT               ((u32)0x10008000)
-#define I2C_FLAG_TIMEOUT                ((u32)0x10004000)
-#define I2C_FLAG_PECERR                 ((u32)0x10001000)
-#define I2C_FLAG_OVR                    ((u32)0x10000800)
-#define I2C_FLAG_AF                     ((u32)0x10000400)
-#define I2C_FLAG_ARLO                   ((u32)0x10000200)
-#define I2C_FLAG_BERR                   ((u32)0x10000100)
-#define I2C_FLAG_TXE                    ((u32)0x10000080)
-#define I2C_FLAG_RXNE                   ((u32)0x10000040)
-#define I2C_FLAG_STOPF                  ((u32)0x10000010)
-#define I2C_FLAG_ADD10                  ((u32)0x10000008)
-#define I2C_FLAG_BTF                    ((u32)0x10000004)
-#define I2C_FLAG_ADDR                   ((u32)0x10000002)
-#define I2C_FLAG_SB                     ((u32)0x10000001)
-                               
-#define IS_I2C_CLEAR_FLAG(FLAG) ((((FLAG) & (u16)0x20FF) == 0x00) && ((FLAG) != (u16)0x00))                                  
-
-#define IS_I2C_GET_FLAG(FLAG) (((FLAG) == I2C_FLAG_DUALF) || ((FLAG) == I2C_FLAG_SMBHOST) || \
-                               ((FLAG) == I2C_FLAG_SMBDEFAULT) || ((FLAG) == I2C_FLAG_GENCALL) || \
-                               ((FLAG) == I2C_FLAG_TRA) || ((FLAG) == I2C_FLAG_BUSY) || \
-                               ((FLAG) == I2C_FLAG_MSL) || ((FLAG) == I2C_FLAG_SMBALERT) || \
-                               ((FLAG) == I2C_FLAG_TIMEOUT) || ((FLAG) == I2C_FLAG_PECERR) || \
-                               ((FLAG) == I2C_FLAG_OVR) || ((FLAG) == I2C_FLAG_AF) || \
-                               ((FLAG) == I2C_FLAG_ARLO) || ((FLAG) == I2C_FLAG_BERR) || \
-                               ((FLAG) == I2C_FLAG_TXE) || ((FLAG) == I2C_FLAG_RXNE) || \
-                               ((FLAG) == I2C_FLAG_STOPF) || ((FLAG) == I2C_FLAG_ADD10) || \
-                               ((FLAG) == I2C_FLAG_BTF) || ((FLAG) == I2C_FLAG_ADDR) || \
-                               ((FLAG) == I2C_FLAG_SB))
-
-/* I2C Events */
-/* EV1 */
-#define  I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED       ((u32)0x00060082) /* TRA, BUSY, TXE and ADDR flags */
-#define  I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED          ((u32)0x00020002) /* BUSY and ADDR flags */
-#define  I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED ((u32)0x00860080)  /* DUALF, TRA, BUSY and TXE flags */
-#define  I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED    ((u32)0x00820000)  /* DUALF and BUSY flags */
-#define  I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED        ((u32)0x00120000)  /* GENCALL and BUSY flags */
-
-/* EV2 */
-#define  I2C_EVENT_SLAVE_BYTE_RECEIVED                     ((u32)0x00020040)  /* BUSY and RXNE flags */
-     
-/* EV3 */
-#define  I2C_EVENT_SLAVE_BYTE_TRANSMITTED                  ((u32)0x00060084)  /* TRA, BUSY, TXE and BTF flags */
-
-/* EV4 */
-#define  I2C_EVENT_SLAVE_STOP_DETECTED                     ((u32)0x00000010)  /* STOPF flag */
-
-/* EV5 */
-#define  I2C_EVENT_MASTER_MODE_SELECT                      ((u32)0x00030001)  /* BUSY, MSL and SB flag */
-
-/* EV6 */
-#define  I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED        ((u32)0x00070082)  /* BUSY, MSL, ADDR, TXE and TRA flags */
-#define  I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED           ((u32)0x00030002)  /* BUSY, MSL and ADDR flags */
-
-/* EV7 */
-#define  I2C_EVENT_MASTER_BYTE_RECEIVED                    ((u32)0x00030040)  /* BUSY, MSL and RXNE flags */
-
-/* EV8 */
-#define I2C_EVENT_MASTER_BYTE_TRANSMITTING                 ((u32)0x00070080) /* TRA, BUSY, MSL, TXE flags */
-
-/* EV8_2 */
-#define  I2C_EVENT_MASTER_BYTE_TRANSMITTED                 ((u32)0x00070084)  /* TRA, BUSY, MSL, TXE and BTF flags */
-      
-/* EV9 */
-#define  I2C_EVENT_MASTER_MODE_ADDRESS10                   ((u32)0x00030008)  /* BUSY, MSL and ADD10 flags */
-                                          
-/* EV3_2 */
-#define  I2C_EVENT_SLAVE_ACK_FAILURE                       ((u32)0x00000400)  /* AF flag */
-
-#define IS_I2C_EVENT(EVENT) (((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_ADDRESS_MATCHED) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_ADDRESS_MATCHED) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_TRANSMITTER_SECONDADDRESS_MATCHED) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_RECEIVER_SECONDADDRESS_MATCHED) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_GENERALCALLADDRESS_MATCHED) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_BYTE_RECEIVED) || \
-                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_DUALF)) || \
-                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_RECEIVED | I2C_FLAG_GENCALL)) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_BYTE_TRANSMITTED) || \
-                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_DUALF)) || \
-                             ((EVENT) == (I2C_EVENT_SLAVE_BYTE_TRANSMITTED | I2C_FLAG_GENCALL)) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_STOP_DETECTED) || \
-                             ((EVENT) == I2C_EVENT_MASTER_MODE_SELECT) || \
-                             ((EVENT) == I2C_EVENT_MASTER_TRANSMITTER_MODE_SELECTED) || \
-                             ((EVENT) == I2C_EVENT_MASTER_RECEIVER_MODE_SELECTED) || \
-                             ((EVENT) == I2C_EVENT_MASTER_BYTE_RECEIVED) || \
-                             ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTED) || \
-                             ((EVENT) == I2C_EVENT_MASTER_BYTE_TRANSMITTING) || \
-                             ((EVENT) == I2C_EVENT_MASTER_MODE_ADDRESS10) || \
-                             ((EVENT) == I2C_EVENT_SLAVE_ACK_FAILURE))
-
-/* I2C own address1 -----------------------------------------------------------*/
-#define IS_I2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= 0x3FF)
-/* I2C clock speed ------------------------------------------------------------*/
-#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) >= 0x1) && ((SPEED) <= 400000))
-
-/* Exported macro ------------------------------------------------------------*/
-/* Exported functions ------------------------------------------------------- */
-void I2C_DeInit(I2C_TypeDef* I2Cx);
-void I2C_Init(I2C_TypeDef* I2Cx, I2C_InitTypeDef* I2C_InitStruct);
-void I2C_StructInit(I2C_InitTypeDef* I2C_InitStruct);
-void I2C_Cmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_DMACmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_DMALastTransferCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GenerateSTART(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GenerateSTOP(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_AcknowledgeConfig(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_OwnAddress2Config(I2C_TypeDef* I2Cx, u8 Address);
-void I2C_DualAddressCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_GeneralCallCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_ITConfig(I2C_TypeDef* I2Cx, u16 I2C_IT, FunctionalState NewState);
-void I2C_SendData(I2C_TypeDef* I2Cx, u8 Data);
-u8 I2C_ReceiveData(I2C_TypeDef* I2Cx);
-void I2C_Send7bitAddress(I2C_TypeDef* I2Cx, u8 Address, u8 I2C_Direction);
-u16 I2C_ReadRegister(I2C_TypeDef* I2Cx, u8 I2C_Register);
-void I2C_SoftwareResetCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_SMBusAlertConfig(I2C_TypeDef* I2Cx, u16 I2C_SMBusAlert);
-void I2C_TransmitPEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_PECPositionConfig(I2C_TypeDef* I2Cx, u16 I2C_PECPosition);
-void I2C_CalculatePEC(I2C_TypeDef* I2Cx, FunctionalState NewState);
-u8 I2C_GetPEC(I2C_TypeDef* I2Cx);
-void I2C_ARPCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_StretchClockCmd(I2C_TypeDef* I2Cx, FunctionalState NewState);
-void I2C_FastModeDutyCycleConfig(I2C_TypeDef* I2Cx, u16 I2C_DutyCycle);
-u32 I2C_GetLastEvent(I2C_TypeDef* I2Cx);
-ErrorStatus I2C_CheckEvent(I2C_TypeDef* I2Cx, u32 I2C_EVENT);
-FlagStatus I2C_GetFlagStatus(I2C_TypeDef* I2Cx, u32 I2C_FLAG);
-void I2C_ClearFlag(I2C_TypeDef* I2Cx, u32 I2C_FLAG);
-ITStatus I2C_GetITStatus(I2C_TypeDef* I2Cx, u32 I2C_IT);
-void I2C_ClearITPendingBit(I2C_TypeDef* I2Cx, u32 I2C_IT);
-
-#endif /*__STM32F10x_I2C_H */
-
-/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/