rt-thread/bsp/phytium/libraries/SConscript

import os
from building import *

objs = []
cwd  = GetCurrentDir()

STANDALONE_DIR = cwd + '/standalone'

# common source
src  = Glob(STANDALONE_DIR+'/common/*.c')
path = [STANDALONE_DIR + '/common']

# port
src += Glob(STANDALONE_DIR+'/port/*.c')
path += [STANDALONE_DIR + '/port'] + [STANDALONE_DIR + '/port/arch']

if GetDepend(['TARGET_ARMV8_AARCH32']):
    src += Glob(STANDALONE_DIR+'/port/arch/armv8/aarch32/*.c') + Glob(STANDALONE_DIR+'/port/arch/armv8/aarch32/*.S')
    path += [STANDALONE_DIR + '/port/arch/armv8/aarch32']
elif GetDepend(['TARGET_ARMV8_AARCH64']):
    src += Glob(STANDALONE_DIR+'/port/arch/armv8/aarch64/*.c') + Glob(STANDALONE_DIR+'/port/arch/armv8/aarch64/*.S')
    path += [STANDALONE_DIR + '/port/arch/armv8/aarch64']

    src += Glob(STANDALONE_DIR+'/port/*.c')
    path += [STANDALONE_DIR + '/port/*.h']      

# board
src += Glob(STANDALONE_DIR+'/board/common/*.c') + Glob(STANDALONE_DIR+'/board/common/*.S')
path += [STANDALONE_DIR + '/board/common'] 

if GetDepend(['TARGET_F2000_4']):
    src += Glob(STANDALONE_DIR+'/board/ft2004/*.c')
    path += [STANDALONE_DIR + '/board/ft2004'] 

if GetDepend(['TARGET_E2000']):
    src += Glob(STANDALONE_DIR+'/board/e2000/*.c')
    path += [STANDALONE_DIR + '/board/e2000'] 

    if GetDepend(['TARGET_E2000Q']):
        src += Glob(STANDALONE_DIR+'/board/e2000/q/*.c')
        path += [STANDALONE_DIR + '/board/e2000/q'] 

    if GetDepend(['TARGET_E2000D']):
        src += Glob(STANDALONE_DIR+'/board/e2000/d/*.c')
        path += [STANDALONE_DIR + '/board/e2000/d'] 
    
    if GetDepend(['ARGET_E2000S']):
        src += Glob(STANDALONE_DIR+'/board/e2000/s/*.c')
        path += [STANDALONE_DIR + '/board/e2000/s'] 
    
if GetDepend(['TARGET_D2000']):
    path += [STANDALONE_DIR + '/board/d2000'] 

# driver

## spim
if GetDepend(['BSP_USING_SPI']):
    src += Glob(STANDALONE_DIR+'/drivers/spi/fspim/*.c')
    path += [STANDALONE_DIR + '/drivers/spi/fspim'] 

## serial
if GetDepend(['BSP_USING_UART']):
    src += Glob(STANDALONE_DIR+'/drivers/serial/fpl011/*.c')
    path += [STANDALONE_DIR + '/drivers/serial/fpl011'] 

## can
if GetDepend(['BSP_USING_CAN']):
    src += Glob(STANDALONE_DIR+'/drivers/can/fcan/*.c') + Glob(STANDALONE_DIR+'/drivers/can/fcan/*.S')
    path += [STANDALONE_DIR + '/drivers/can/fcan/'] 

## qspi
if GetDepend(['BSP_USING_QSPI']):
    src += Glob(STANDALONE_DIR+'/drivers/qspi/fqspi/*.c') + Glob(STANDALONE_DIR+'/drivers/qspi/fqspi/*.S')
    path += [STANDALONE_DIR + '/drivers/qspi/fqspi/']

## eth
if GetDepend(['BSP_USING_ETH']):
    src += Glob(STANDALONE_DIR+'/drivers/eth/fxmac/*.c') + Glob(STANDALONE_DIR+'/drivers/eth/fxmac/*.S')
    path += [STANDALONE_DIR + '/drivers/eth/fxmac/'] + [STANDALONE_DIR + '/drivers/eth/fxmac/phy/']

## sdio
if GetDepend(['BSP_USING_SDIO']):
    src += Glob(STANDALONE_DIR+'/drivers/mmc/fsdio/*.c') + Glob(STANDALONE_DIR+'/drivers/mmc/fsdio/*.S')
    path += [STANDALONE_DIR + '/drivers/mmc/fsdio/']

## gpio
if GetDepend(['BSP_USING_GPIO']):
    src += Glob(STANDALONE_DIR+'/drivers/pin/fgpio/*.c') + Glob(STANDALONE_DIR+'/drivers/pin/fgpio/*.S')
    path += [STANDALONE_DIR + '/drivers/pin/fgpio/']

## iopad
if GetDepend(['ENABLE_IOPAD']):
    src += Glob(STANDALONE_DIR+'/drivers/iopad/fiopad/*.c') + Glob(STANDALONE_DIR+'/drivers/iopad/fiopad/*.S')
    path += [STANDALONE_DIR + '/drivers/iopad/fiopad/']

# phytium ports rt-thread drivers
PORT_DRV_DIR = cwd + '/drivers'

src += Glob(PORT_DRV_DIR + '/*.S')
src	+= Glob(PORT_DRV_DIR + '/*.c')

# phytium ports rt-thread examples
PORT_DRV_DIR = cwd + '/examples'

src	+= Glob(PORT_DRV_DIR + '/*.c')

# sdkcomfig.h
path += [cwd]

# add group
ASFLAGS = ''
group = DefineGroup('FT_DRIVER', src, depend=[
                    ''], CPPPATH=path, ASFLAGS = ASFLAGS)


Return('group')