sdk-debuger-jlink/Samples/JFlash/ProjectFiles/Toshiba/GlynGraphicBaseBoard_TMPA900

This custom RAMCode package includes the following files:

- GlynGraphicBaseBoard_TMPA900_LP_NAND_LE.jflash (J-Flash project for NAND flash)
- RAMCodeV2_GlynGraphicBaseBoard_LP_NAND_LE.mot (Custom RAMCode, compiled for little endian (LE))
- Readme.txt (This readme)
- SEGGERDemo.bin (SEGGER demo which boots from NAND flash)

*************************************************************************************************************

This RAMCode is designed to be used and has been tested on an Glyn Graphic Base Board (Rev 0A0) with
the Toshiba TMPA900 CPU module using a Samsung K9F2G08U0A NAND flash

*************************************************************************************************************

Requirements to use this RAMCode:
- Glyn Graphic Base Board (Rev 0A0) with Toshiba TMPA900 CPU module compatible hardware
- The J-Flash project assumes that an 25 MHz oscillator is used on X1.
Otherwise CPU init sequence in J-Flash needs to be changed