| .. |
|
gpio
|
719b75da9b
docs: provide more information about ESP32-C3 GPIO0~GPIO5 which can be used to wake up the chip from Deep-sleep mode
|
%!s(int64=2) %!d(string=hai) anos |
|
spi_flash
|
15153b5598
spi_flash: Update documents for flash-suspend
|
%!s(int64=2) %!d(string=hai) anos |
|
usb_host
|
a57496acfe
usb_host: Add maintainer's notes (Design, Architecture)
|
%!s(int64=3) %!d(string=hai) anos |
|
adc_calibration.rst
|
b7053b46ef
esp32h4: remove esp32h4 target from peripherals
|
%!s(int64=2) %!d(string=hai) anos |
|
adc_continuous.rst
|
b7053b46ef
esp32h4: remove esp32h4 target from peripherals
|
%!s(int64=2) %!d(string=hai) anos |
|
adc_oneshot.rst
|
b7053b46ef
esp32h4: remove esp32h4 target from peripherals
|
%!s(int64=2) %!d(string=hai) anos |
|
ana_cmpr.rst
|
53584bb5a7
ana_cmpr: add programming guide
|
%!s(int64=2) %!d(string=hai) anos |
|
clk_tree.rst
|
a4e8960ab4
esp_clk_tree: Rename clk_tree_xxx to esp_clk_tree_xxx, add compilation warning to clk_tree.h
|
%!s(int64=2) %!d(string=hai) anos |
|
dac.rst
|
ba79daade6
Docs: Add CN translation for dac.rst
|
%!s(int64=3) %!d(string=hai) anos |
|
dedic_gpio.rst
|
623bffaab8
Dedicated GPIO: add examples implementing software I2C, UART and SPI on RISC-V targets.
|
%!s(int64=3) %!d(string=hai) anos |
|
ds.rst
|
6c7fd1edc0
mqtt/ssl_ds: Remove unwanted references to configure_ds.py, Also updated
|
%!s(int64=3) %!d(string=hai) anos |
|
etm.rst
|
4019e307f1
doc: add api reference for etm driver
|
%!s(int64=3) %!d(string=hai) anos |
|
gpio.rst
|
359b237cc5
ulp: added sleep support for lp core
|
%!s(int64=2) %!d(string=hai) anos |
|
gptimer.rst
|
2d52334e5d
gptimer: fix race condition between start and stop
|
%!s(int64=3) %!d(string=hai) anos |
|
hmac.rst
|
2a46fecb36
esp32c6: Enable documentation for esp32c6 hmac and ds
|
%!s(int64=3) %!d(string=hai) anos |
|
i2c.rst
|
a964b85d45
docs: use soc_caps directly in text where possible
|
%!s(int64=2) %!d(string=hai) anos |
|
i2s.rst
|
82159fa135
i2s_doc: fixed the data of stereo left/right state
|
%!s(int64=2) %!d(string=hai) anos |
|
index.rst
|
53584bb5a7
ana_cmpr: add programming guide
|
%!s(int64=2) %!d(string=hai) anos |
|
lcd.rst
|
38fcfbedba
lcd: add doc about adding manufacture specific initialization code
|
%!s(int64=2) %!d(string=hai) anos |
|
ledc.rst
|
49f16eefbb
esp32h4: checked all the corner stuffs of the removal
|
%!s(int64=2) %!d(string=hai) anos |
|
mcpwm.rst
|
72d0f5b35b
mcpwm: can't apply the same delay module to multiple generators
|
%!s(int64=2) %!d(string=hai) anos |
|
parlio.rst
|
a7f5ff32ff
doc: initial parallel IO programming guide
|
%!s(int64=3) %!d(string=hai) anos |
|
pcnt.rst
|
5bd99deb48
pcnt: support accumulate count value
|
%!s(int64=3) %!d(string=hai) anos |
|
rmt.rst
|
98579b5316
docs: update link to rmt onewire example
|
%!s(int64=2) %!d(string=hai) anos |
|
sd_pullup_requirements.rst
|
030cb77597
docs: update redirected links
|
%!s(int64=3) %!d(string=hai) anos |
|
sdio_slave.rst
|
e80e1450ac
sdio: c6 doc update
|
%!s(int64=3) %!d(string=hai) anos |
|
sdm.rst
|
482a26e284
sdm: support sdm on esp32h2
|
%!s(int64=3) %!d(string=hai) anos |
|
sdmmc_host.rst
|
56f2001317
sdmmc/sdspi: allow custom setup of SD card frequency
|
%!s(int64=3) %!d(string=hai) anos |
|
sdspi_host.rst
|
29bdfc5ecc
docs: Fixed wrong structure reference given
|
%!s(int64=3) %!d(string=hai) anos |
|
sdspi_share.rst
|
54dcd4d4d6
docs/sdspi: add documentation about sharing SPI bus among SD card and other devices
|
%!s(int64=4) %!d(string=hai) anos |
|
secure_element.rst
|
423e600d46
secure_element: atecc608_ecdsa example
|
%!s(int64=5) %!d(string=hai) anos |
|
spi_features.rst
|
913c1722c2
docs: Review and update spi_features
|
%!s(int64=3) %!d(string=hai) anos |
|
spi_master.rst
|
05fe748c1e
docs: provide Chinese translation for api-reference/peripherals/spi_master
|
%!s(int64=2) %!d(string=hai) anos |
|
spi_slave.rst
|
2e4455a7e4
docs: finalize CN for index/spi_slave/system_time
|
%!s(int64=3) %!d(string=hai) anos |
|
spi_slave_hd.rst
|
6930d6aa1e
spi_slave_hd: add segment mode example
|
%!s(int64=4) %!d(string=hai) anos |
|
temp_sensor.rst
|
840ff4f865
temperature_sensor: Implement temperature monitor interrupt feature on ESP32H2/ESP32C6
|
%!s(int64=3) %!d(string=hai) anos |
|
touch_element.rst
|
62ab4456a8
touch_sleep: complete the support for touch sleep
|
%!s(int64=3) %!d(string=hai) anos |
|
touch_pad.rst
|
92e005ba0e
docs: add pin information of touch sensor
|
%!s(int64=3) %!d(string=hai) anos |
|
twai.rst
|
a964b85d45
docs: use soc_caps directly in text where possible
|
%!s(int64=2) %!d(string=hai) anos |
|
uart.rst
|
a964b85d45
docs: use soc_caps directly in text where possible
|
%!s(int64=2) %!d(string=hai) anos |
|
usb_device.rst
|
2fb3681ad2
Merge branch 'feature/usb_composite_device_support' into 'master'
|
%!s(int64=2) %!d(string=hai) anos |
|
usb_host.rst
|
f93bb3a63c
Merge branch 'contrib/github_pr_11113' into 'master'
|
%!s(int64=2) %!d(string=hai) anos |
Cao Sen Miao
15153b5598
spi_flash: Update documents for flash-suspend