use dcd_event_bus_reset() with speed to replace bus_signal

src/device/usbd.c

@@ -1103,6 +1103,24 @@ bool usbd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_ep)
 {
   TU_LOG2("  Open EP %02X with Size = %u\r\n", desc_ep->bEndpointAddress, desc_ep->wMaxPacketSize.size);
 
+  if (TUSB_XFER_ISOCHRONOUS == desc_ep->bmAttributes.xfer)
+  {
+    TU_ASSERT(desc_ep->wMaxPacketSize.size <= (_usbd_dev.speed == TUSB_SPEED_HIGH ? 1024 : 1023));
+  }
+  else
+  {
+    uint16_t const max_epsize = (_usbd_dev.speed == TUSB_SPEED_HIGH ? 512 : 64);
+
+    if (TUSB_XFER_BULK == desc_ep->bmAttributes.xfer)
+    {
+      // Bulk must be EXACTLY 512/64 bytes
+      TU_ASSERT(desc_ep->wMaxPacketSize.size == max_epsize);
+    }else
+    {
+      TU_ASSERT(desc_ep->wMaxPacketSize.size <= max_epsize);
+    }
+  }
+
   return dcd_edpt_open(rhport, desc_ep);
 }
 

src/portable/dialog/da146xx/dcd_da146xx.c

@@ -664,7 +664,7 @@ static void handle_bus_reset(void)
   (void)USB->USB_ALTEV_REG;
   _dcd.in_reset = true;
 
-  dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+  dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
   USB->USB_DMA_CTRL_REG = 0;
 
   USB->USB_MAMSK_REG = USB_USB_MAMSK_REG_USB_M_INTR_Msk |
@@ -821,14 +821,13 @@ void dcd_disconnect(uint8_t rhport)
 
 bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
 {
+  (void)rhport;
+
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir   = tu_edpt_dir(desc_edpt->bEndpointAddress);
   xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
   uint8_t iso_mask = 0;
-  
-  (void)rhport;
 
-  TU_ASSERT(desc_edpt->wMaxPacketSize.size <= 1023);
   TU_ASSERT(epnum < EP_MAX);
 
   xfer->max_packet_size = desc_edpt->wMaxPacketSize.size;

src/portable/espressif/esp32s2/dcd_esp32s2.c

@@ -252,7 +252,6 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const *desc_edpt)
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir = tu_edpt_dir(desc_edpt->bEndpointAddress);
 
-  TU_ASSERT(desc_edpt->wMaxPacketSize.size <= 64);
   TU_ASSERT(epnum < EP_MAX);
 
   xfer_ctl_t *xfer = XFER_CTL_BASE(epnum, dir);

src/portable/microchip/samd/dcd_samd.c

@@ -387,7 +387,7 @@ void dcd_int_handler (uint8_t rhport)
     USB->DEVICE.INTENCLR.reg = USB_DEVICE_INTFLAG_WAKEUP | USB_DEVICE_INTFLAG_SUSPEND;
 
     bus_reset();
-    dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
   }
 
   // Handle SETUP packet

src/portable/microchip/samg/dcd_samg.c

@@ -338,7 +338,7 @@ void dcd_int_handler(uint8_t rhport)
   if (intr_status & UDP_ISR_ENDBUSRES_Msk)
   {
     bus_reset();
-    dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
   }
 
   // SOF

src/portable/nordic/nrf5x/dcd_nrf5x.c

@@ -533,7 +533,7 @@ void dcd_int_handler(uint8_t rhport)
   if ( int_status & USBD_INTEN_USBRESET_Msk )
   {
     bus_reset();
-    dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
   }
 
   // ISOIN: Data was moved to endpoint buffer, client will be notified in SOF

src/portable/nuvoton/nuc120/dcd_nuc120.c

@@ -329,8 +329,7 @@ void dcd_int_handler(uint8_t rhport)
       USBD->ATTR |= USBD_ATTR_USB_EN_Msk | USBD_ATTR_PHY_EN_Msk;
 
       bus_reset();
-
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     }
 
     if(state & USBD_STATE_SUSPEND)

src/portable/nuvoton/nuc121/dcd_nuc121.c

@@ -340,7 +340,7 @@ void dcd_int_handler(uint8_t rhport)
 
       bus_reset();
 
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     }
 
     if(state & USBD_ATTR_SUSPEND_Msk)

src/portable/nxp/khci/dcd_khci.c

@@ -224,7 +224,7 @@ static void process_bus_reset(uint8_t rhport)
   _dcd.addr = 0;
   prepare_next_setup_packet(rhport);
   KHCI->CTL &= ~USB_CTL_ODDRST_MASK;
-  dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true);
+  dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
 }
 
 static void process_bus_inactive(uint8_t rhport)

src/portable/nxp/lpc17_40/dcd_lpc17_40.c

@@ -471,7 +471,7 @@ static void bus_event_isr(uint8_t rhport)
   if (dev_status & SIE_DEV_STATUS_RESET_MASK)
   {
     bus_reset();
-    dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(rhport, TUSB_SPEED_FULL, true);
   }
 
   if (dev_status & SIE_DEV_STATUS_CONNECT_CHANGE_MASK)

src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c

@@ -243,7 +243,7 @@ bool dcd_edpt_open(uint8_t rhport, tusb_desc_endpoint_t const * p_endpoint_desc)
   (void) rhport;
 
   // TODO not support ISO yet
-  if (p_endpoint_desc->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS) return false;
+  TU_VERIFY(p_endpoint_desc->bmAttributes.xfer != TUSB_XFER_ISOCHRONOUS);
 
   //------------- Prepare Queue Head -------------//
   uint8_t ep_id = ep_addr2id(p_endpoint_desc->bEndpointAddress);
@@ -357,7 +357,7 @@ void dcd_int_handler(uint8_t rhport)
     if ( cmd_stat & CMDSTAT_RESET_CHANGE_MASK) // bus reset
     {
       bus_reset();
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     }
 
     if (cmd_stat & CMDSTAT_CONNECT_CHANGE_MASK)

src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c

@@ -547,7 +547,7 @@ void dcd_int_handler(uint8_t rhport) {
     // USBRST is start of reset.
     clear_istr_bits(USB_ISTR_RESET);
     dcd_handle_bus_reset();
-    dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+    dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
     return; // Don't do the rest of the things here; perhaps they've been cleared?
   }
 

src/portable/st/synopsys/dcd_synopsys.c

@@ -565,15 +565,6 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
 
   TU_ASSERT(epnum < EP_MAX);
 
-  if (desc_edpt->bmAttributes.xfer == TUSB_XFER_ISOCHRONOUS)
-  {
-    TU_ASSERT(desc_edpt->wMaxPacketSize.size <= (get_speed(rhport) == TUSB_SPEED_HIGH ? 1024 : 1023));
-  }
-  else
-  {
-    TU_ASSERT(desc_edpt->wMaxPacketSize.size <= (get_speed(rhport) == TUSB_SPEED_HIGH ? 512 : 64));
-  }
-
   xfer_ctl_t * xfer = XFER_CTL_BASE(epnum, dir);
   xfer->max_size = desc_edpt->wMaxPacketSize.size;
   xfer->interval = desc_edpt->bInterval;

src/portable/ti/msp430x5xx/dcd_msp430x5xx.c

@@ -232,9 +232,9 @@ bool dcd_edpt_open (uint8_t rhport, tusb_desc_endpoint_t const * desc_edpt)
   uint8_t const epnum = tu_edpt_number(desc_edpt->bEndpointAddress);
   uint8_t const dir   = tu_edpt_dir(desc_edpt->bEndpointAddress);
 
-  // Unsupported endpoint numbers/size or type (Iso not supported. Control
+  // Unsupported endpoint numbers or type (Iso not supported. Control
   // not supported on nonzero endpoints).
-  if((desc_edpt->wMaxPacketSize.size > 64) || (epnum > 7) || \
+  if( (epnum > 7) || \
       (desc_edpt->bmAttributes.xfer == 0) || \
       (desc_edpt->bmAttributes.xfer == 1)) {
     return false;
@@ -572,7 +572,7 @@ void dcd_int_handler(uint8_t rhport)
   {
     case USBVECINT_RSTR:
       bus_reset();
-      dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+      dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
       break;
 
     // Clear the (hardware-enforced) NAK on EP 0 after a SETUP packet

src/portable/valentyusb/eptri/dcd_eptri.c

@@ -332,7 +332,7 @@ static void dcd_reset(void)
   usb_out_ev_enable_write(1);
   usb_setup_ev_enable_write(3);
 
-  dcd_event_bus_signal(0, DCD_EVENT_BUS_RESET, true);
+  dcd_event_bus_reset(0, TUSB_SPEED_FULL, true);
 }
 
 // Initializes the USB peripheral for device mode and enables it.

test/test/device/msc/test_msc_device.c

@@ -202,7 +202,7 @@ void setUp(void)
     tusb_init();
   }
 
-  dcd_event_bus_signal(rhport, DCD_EVENT_BUS_RESET, false);
+  dcd_event_bus_reset(rhport, TUSB_SPEED_HIGH, false);
   tud_task();
 }
 

test/test/support/tusb_config.h

@@ -86,8 +86,8 @@
 //------------- CDC -------------//
 
 // FIFO size of CDC TX and RX
-#define CFG_TUD_CDC_RX_BUFSIZE   64
-#define CFG_TUD_CDC_TX_BUFSIZE   64
+#define CFG_TUD_CDC_RX_BUFSIZE   512
+#define CFG_TUD_CDC_TX_BUFSIZE   512
 
 //------------- MSC -------------//
 
@@ -97,7 +97,7 @@
 //------------- HID -------------//
 
 // Should be sufficient to hold ID (if any) + Data
-#define CFG_TUD_HID_EP_BUFSIZE    16
+#define CFG_TUD_HID_EP_BUFSIZE    64
 
 #ifdef __cplusplus
  }