clean up jlink default interface

examples/rules.mk

@@ -147,6 +147,8 @@ else
   JLINKEXE = JLinkExe
 endif
 
+JLINK_IF ?= swd
+
 # Flash using jlink
 flash-jlink: $(BUILD)/$(BOARD)-firmware.hex
 	@echo halt > $(BUILD)/$(BOARD).jlink

hw/bsp/adafruit_clue/board.mk

@@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # For uf2 conversion
 UF2_FAMILY = 0xADA52840

hw/bsp/arduino_nano33_ble/board.mk

@@ -51,7 +51,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # flash using bossac (as part of Nano33 BSP tools)
 # can be found in arduino15/packages/arduino/tools/bossac/

hw/bsp/circuitplayground_bluefruit/board.mk

@@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # For uf2 conversion
 UF2_FAMILY = 0xADA52840

hw/bsp/circuitplayground_express/board.mk

@@ -38,7 +38,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD21G18
-JLINK_IF = swd
 
 # flash using jlink
 flash: $(BUILD)/$(BOARD)-firmware.uf2

hw/bsp/d5035_01/board.mk

@@ -57,7 +57,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAME51J19
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/da14695_dk_usb/board.mk

@@ -38,7 +38,6 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
 
 # For flash-jlink target
 JLINK_DEVICE = DA14695
-JLINK_IF = swd
 
 # flash using jlink but with some twists
 flash: flash-dialog

hw/bsp/da1469x_dk_pro/board.mk

@@ -38,7 +38,6 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
 
 # For flash-jlink target
 JLINK_DEVICE = DA14699
-JLINK_IF = swd
 
 # flash using jlink but with some twists
 flash: flash-dialog

hw/bsp/ea4088qs/board.mk

@@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = LPC4088
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/ea4357/board.mk

@@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = LPC4357_M4
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/feather_m0_express/board.mk

@@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD21G18
-JLINK_IF = swd
 
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/

hw/bsp/feather_m4_express/board.mk

@@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD51J19
-JLINK_IF = swd
 
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/

hw/bsp/feather_nrf52840_express/board.mk

@@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # For uf2 conversion
 UF2_FAMILY = 0xADA52840

hw/bsp/feather_nrf52840_sense/board.mk

@@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # For uf2 conversion
 UF2_FAMILY = 0xADA52840

hw/bsp/feather_stm32f405/board.mk

@@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f405rg
-JLINK_IF = swd
 
 # Path to STM32 Cube Programmer CLI, should be added into system path
 STM32Prog = STM32_Programmer_CLI

hw/bsp/itsybitsy_m0/board.mk

@@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD21G18
-JLINK_IF = swd
 
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/

hw/bsp/itsybitsy_m4/board.mk

@@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD51J19
-JLINK_IF = swd
 
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/

hw/bsp/itsybitsy_nrf52840/board.mk

@@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # For uf2 conversion
 UF2_FAMILY = 0xADA52840

hw/bsp/lpcxpresso11u37/board.mk

@@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = LPC11U37/401
-JLINK_IF = swd
 
 # flash using pyocd 
 flash: $(BUILD)/$(BOARD)-firmware.hex

hw/bsp/lpcxpresso11u68/board.mk

@@ -37,7 +37,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = LPC11U68
-JLINK_IF = swd
 
 # flash using pyocd 
 flash: $(BUILD)/$(BOARD)-firmware.hex

hw/bsp/lpcxpresso1347/board.mk

@@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = LPC1347
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/lpcxpresso1549/board.mk

@@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = LPC1549
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/lpcxpresso1769/board.mk

@@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = LPC1769
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/lpcxpresso51u68/board.mk

@@ -41,7 +41,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = LPC51U68
-JLINK_IF = swd
 
 # flash using pyocd (51u68 is not supported yet)
 flash: $(BUILD)/$(BOARD)-firmware.hex

hw/bsp/lpcxpresso54114/board.mk

@@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = LPC54114J256_M4
-JLINK_IF = swd
 
 # flash using pyocd
 flash: $(BUILD)/$(BOARD)-firmware.hex

hw/bsp/lpcxpresso55s69/board.mk

@@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
 
 # For flash-jlink target
 JLINK_DEVICE = LPC55S69
-JLINK_IF = swd
 
 # flash using pyocd
 flash: $(BUILD)/$(BOARD)-firmware.hex

hw/bsp/luna/board.mk

@@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD21G18
-JLINK_IF = swd
 
 # flash using jlink
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/mbed1768/board.mk

@@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = LPC1768
-JLINK_IF = swd
 
 # flash using pyocd 
 flash: $(BUILD)/$(BOARD)-firmware.hex

hw/bsp/mcb1800/board.mk

@@ -37,7 +37,6 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = LPC1857
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/metro_m0_express/board.mk

@@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD21G18
-JLINK_IF = swd
 
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/

hw/bsp/metro_m4_express/board.mk

@@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD51J19
-JLINK_IF = swd
 
 # flash using bossac at least version 1.8
 # can be found in arduino15/packages/arduino/tools/bossac/

hw/bsp/mimxrt1010_evk/board.mk

@@ -46,7 +46,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = MIMXRT1011DAE5A
-JLINK_IF = swd
 
 # flash by copying bin file to DAP Mass Storage
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/mimxrt1020_evk/board.mk

@@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = MIMXRT1021DAG5A
-JLINK_IF = swd
 
 # flash by copying bin file to DAP Mass Storage
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/mimxrt1050_evkb/board.mk

@@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = MIMXRT1052xxx6B
-JLINK_IF = swd
 
 # flash by copying bin file to DAP Mass Storage
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/mimxrt1060_evk/board.mk

@@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = MIMXRT1062xxx6A
-JLINK_IF = swd
 
 # flash by copying bin file to DAP Mass Storage
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/mimxrt1064_evk/board.mk

@@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = MIMXRT1064xxx6A
-JLINK_IF = swd
 
 # flash by copying bin file to DAP Mass Storage
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/nrf52840_mdk_dongle/board.mk

@@ -48,7 +48,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # flash using Nordic nrfutil (pip2 install nrfutil)
 # 	make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash

hw/bsp/nutiny_nuc121s/board.mk

@@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = NUC121SC2AE
-JLINK_IF = swd
 
 # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
 # Please compile and install it from github source

hw/bsp/nutiny_nuc125s/board.mk

@@ -33,7 +33,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = NUC125SC2AE
-JLINK_IF = swd
 
 # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
 # Please compile and install it from github source

hw/bsp/nutiny_nuc126v/board.mk

@@ -53,7 +53,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = NUC126VG4AE
-JLINK_IF = swd
 
 # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
 # Please compile and install it from github source

hw/bsp/nutiny_sdk_nuc120/board.mk

@@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = NUC120LE3
-JLINK_IF = swd
 
 # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
 # Please compile and install it from github source

hw/bsp/nutiny_sdk_nuc505/board.mk

@@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = NUC505YO13Y
-JLINK_IF = swd
 
 # Note
 # To be able to program the SPI flash, it need to boot with ICP mode "1011". 

hw/bsp/pca10056/board.mk

@@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/pca10059/board.mk

@@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # flash using Nordic nrfutil (pip2 install nrfutil)
 # 	make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash

hw/bsp/pca10100/board.mk

@@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52833_XXAA
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/pyboardv11/board.mk

@@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f405rg
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/raytac_mdbt50q_rx/board.mk

@@ -48,7 +48,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = nRF52840_xxAA
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/samd11_xplained/board.mk

@@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD11D14
-JLINK_IF = swd
 
 # flash using edbg
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/samg55xplained/board.mk

@@ -47,7 +47,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMG55J19
-JLINK_IF = swd
 
 # flash using edbg from https://github.com/ataradov/edbg
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/seeeduino_xiao/board.mk

@@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = ATSAMD21G18
-JLINK_IF = swd
 
 # flash using jlink
 flash: flash-jlink

hw/bsp/stm32f070rbnucleo/board.mk

@@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f070rb
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32f072disco/board.mk

@@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f072rb
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32f103bluepill/board.mk

@@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f103c8
-JLINK_IF = swd
 
 # flash target ROM bootloader
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/stm32f207nucleo/board.mk

@@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM3
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f207zg
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32f303disco/board.mk

@@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f303vc
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32f401blackpill/board.mk

@@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f401cc
-JLINK_IF = swd
 
 # flash target ROM bootloader
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/stm32f407disco/board.mk

@@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f407vg
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32f411blackpill/board.mk

@@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f411ce
-JLINK_IF = swd
 
 # flash target ROM bootloader
 flash: $(BUILD)/$(BOARD)-firmware.bin

hw/bsp/stm32f411disco/board.mk

@@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f411ve
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32f412disco/board.mk

@@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32f41zx
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32h743eval/board.mk

@@ -57,7 +57,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h743xi
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32h745disco/board.mk

@@ -52,7 +52,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = stm32h745xi
-JLINK_IF = swd
 
 # flash target using on-board stlink
 flash: flash-stlink

hw/bsp/stm32l0538disco/board.mk

@@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM0
 
 # For flash-jlink target
 JLINK_DEVICE = STM32L053R8
-JLINK_IF = swd
 
 # Path to STM32 Cube Programmer CLI, should be added into system path 
 STM32Prog = STM32_Programmer_CLI

hw/bsp/stm32l476disco/board.mk

@@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM4F
 
 # For flash-jlink target
 JLINK_DEVICE = stm32l476vg
-JLINK_IF = swd
 
 # Path to STM32 Cube Programmer CLI, should be added into system path
 STM32Prog = STM32_Programmer_CLI

hw/bsp/teensy_40/board.mk

@@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
 
 # For flash-jlink target
 JLINK_DEVICE = MIMXRT1062xxx6A
-JLINK_IF = swd
 
 # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli
 # Make sure it is in your PATH